summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/sysdev/ppc4xx_pci.c
Commit message (Collapse)AuthorAgeFilesLines
* powerpc: Remove superfluous bootmem includesAnton Blanchard2014-11-091-1/+0Star
| | | | | | | | Lots of places included bootmem.h even when not using bootmem. Signed-off-by: Anton Blanchard <anton@samba.org> Tested-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc: Added PCI MSI support using the HSTA moduleAlistair Popple2014-05-011-2/+6
| | | | | | | | | | | | The PPC476GTR SoC supports message signalled interrupts (MSI) by writing to special addresses within the High Speed Transfer Assist (HSTA) module. This patch adds support for PCI MSI with a new system device. The DMA window is also updated to allow access to the entire 42-bit address range to allow PCI devices write access to the HSTA module. Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* IBM Akebono: Add the Akebono platformAlistair Popple2014-05-011-3/+10
| | | | | | | This patch adds support for the IBM Akebono board. Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/4xx: Fix section mismatch in ppc4xx_pci.cAlistair Popple2014-04-281-1/+1
| | | | | | | | | | | | | | | | | | | | This patch fixes this section mismatch: WARNING: vmlinux.o(.text+0x1efc4): Section mismatch in reference from the function apm821xx_pciex_init_port_hw() to the function .init.text:ppc4xx_pciex_wait_on_sdr.isra.9() The function apm821xx_pciex_init_port_hw() references the function __init ppc4xx_pciex_wait_on_sdr.isra.9(). This is often because apm821xx_pciex_init_port_hw lacks a __init annotation or the annotation of ppc4xx_pciex_wait_on_sdr.isra.9 is wrong. apm821xx_pciex_init_port_hw is only referenced by a struct in __initdata, so it should be safe to add __init to apm821xx_pciex_init_port_hw. Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/pci: Support per-aperture memory offsetBenjamin Herrenschmidt2013-05-061-6/+9
| | | | | | | | | | | | | | | | | The PCI core supports an offset per aperture nowadays but our arch code still has a single offset per host bridge representing the difference betwen CPU memory addresses and PCI MMIO addresses. This is a problem as new machines and hypervisor versions are coming out where the 64-bit windows will have a different offset (basically mapped 1:1) from the 32-bit windows. This fixes it by using separate offsets. In the long run, we probably want to get rid of that intermediary struct pci_controller and have those directly stored into the pci_host_bridge as they are parsed but this will be a more invasive change. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/44x: Add support PCI-E for APM821xx SoC and Bluestone boardVinh Nguyen Huu Tuong2012-03-171-0/+70
| | | | | | | | This patch extends PCI-E driver to support PCI-E for APM821xx SoC on Bluestone board. Signed-off-by: Vinh Nguyen Huu Tuong <vhtnguyen@apm.com> Signed-off-by: Josh Boyer <jwboyer@gmail.com>
* powerpc/476fpe: Add 476fpe SoC codeTony Breeds2011-12-091-1/+56
| | | | | | | Based on original work by David 'Shaggy' Kleikamp. Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Josh Boyer <jwboyer@gmail.com>
* powerpc/44x: pci: Setup the dma_window properties for each pci_controllerTony Breeds2011-12-091-0/+6
| | | | | | | Needed if you want to use swiotlb, harmless otherwise. Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Josh Boyer <jwboyer@gmail.com>
* powerpc/44x: pci: Add a want_sdr flag into ppc4xx_pciex_hwopsTony Breeds2011-12-091-6/+14
| | | | | | | | | | | | Currituck doesn't need nor use SDR so aborting the pci setup if there is no sdr-base would be bad. Add a flag to ppc4xx_pciex_hwops for the backends to state if they need SDR and then only complain and abort if they do and it's not found in the device tree. Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Josh Boyer <jwboyer@gmail.com>
* powerpc/44x: pci: Use PCI_BASE_ADDRESS_MEM_PREFETCH rather than magic value.Tony Breeds2011-12-091-1/+1
| | | | | Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Josh Boyer <jwboyer@gmail.com>
* powerpc/4xx/pci: Add __init annotations for *init_port_hw() functions.Tony Breeds2011-09-201-6/+6
| | | | | | | | | | | | | | | | | | | | The various port_init_hw methods of ppc4xx_pciex_hwops should have been marked __init and when I added ppc4xx_pciex_port_reset_sdr(), which is __init. This added many section mismatch warnings like: WARNING: arch/powerpc/sysdev/built-in.o(.text+0x5c68): Section mismatch in reference from the function ppc440spe_pciex_init_port_hw() to the function .init.text:ppc4xx_pciex_port_reset_sdr() The function ppc440spe_pciex_init_port_hw() references the function __init ppc4xx_pciex_port_reset_sdr(). This is often because ppc440spe_pciex_init_port_hw lacks a __init annotation or the annotation of ppc4xx_pciex_port_reset_sdr is wrong. Trivial patch to silence those warnings. Reported-By: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Yours Tony Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* Merge remote-tracking branch 'jwb/next' into nextBenjamin Herrenschmidt2011-08-301-17/+72
|\
| * powerpc/4xx: enable and fix pcie gen1/gen2 on the 460sxAyman El-Khashab2011-08-111-17/+72
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds a register to the config space for the 460sx. Changes the vc0 detect to a pll detect. maps configuration space to test the link status. changes the setup to enable gen2 devices to operate at gen2 speeds. fixes mapping that was not correct for the 460sx. added bit definitions for the OMRxMSKL registers. Removed reserved bit that was set incorrectly in the OMR2MSKL register. tested on the 460sx eiger and custom board Signed-off-by: Ayman El-Khashab <ayman@elkhashab.com> Signed-off-by: Josh Boyer <jwboyer@gmail.com>
* | powerpc/4xx: Fix build of PCI code on 405Benjamin Herrenschmidt2011-08-051-2/+3
|/ | | | | | | | | | | Commit 112d1fe9f7715db423ffeec5ac1beccff6093dc4 "powerpc/4xx: Add check_link to struct ppc4xx_pciex_hwops" inadvertently broke 405 builds due to some functions being over protected by an ifdef CONFIG_44x. Move them back out. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* Merge branch 'next/cross-platform' of ↵Linus Torvalds2011-07-271-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc * 'next/cross-platform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: ARM: Consolidate the clkdev header files ARM: set vga memory base at run-time ARM: convert PCI defines to variables ARM: pci: make pcibios_assign_all_busses use pci_has_flag ARM: remove unnecessary mach/hardware.h includes pci: move microblaze and powerpc pci flag functions into asm-generic powerpc: rename ppc_pci_*_flags to pci_*_flags Fix up conflicts in arch/microblaze/include/asm/pci-bridge.h
| * powerpc: rename ppc_pci_*_flags to pci_*_flagsRob Herring2011-07-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This renames pci flags functions and enums in preparation for creating generic version in asm-generic/pci-bridge.h. The following search and replace is done: s/ppc_pci_/pci_/ s/PPC_PCI_/PCI_/ Direct accesses to ppc_pci_flag variable are replaced with helper functions. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org>
* | Merge branch 'next' of ↵Linus Torvalds2011-07-261-65/+82
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (99 commits) drivers/virt: add missing linux/interrupt.h to fsl_hypervisor.c powerpc/85xx: fix mpic configuration in CAMP mode powerpc: Copy back TIF flags on return from softirq stack powerpc/64: Make server perfmon only built on ppc64 server devices powerpc/pseries: Fix hvc_vio.c build due to recent changes powerpc: Exporting boot_cpuid_phys powerpc: Add CFAR to oops output hvc_console: Add kdb support powerpc/pseries: Fix hvterm_raw_get_chars to accept < 16 chars, fixing xmon powerpc/irq: Quieten irq mapping printks powerpc: Enable lockup and hung task detectors in pseries and ppc64 defeconfigs powerpc: Add mpt2sas driver to pseries and ppc64 defconfig powerpc: Disable IRQs off tracer in ppc64 defconfig powerpc: Sync pseries and ppc64 defconfigs powerpc/pseries/hvconsole: Fix dropped console output hvc_console: Improve tty/console put_chars handling powerpc/kdump: Fix timeout in crash_kexec_wait_realmode powerpc/mm: Fix output of total_ram. powerpc/cpufreq: Add cpufreq driver for Momentum Maple boards powerpc: Correct annotations of pmu registration functions ... Fix up trivial Kconfig/Makefile conflicts in arch/powerpc, drivers, and drivers/cpufreq
| * | powerpc/4xx: Move PCIE printk to proper functionJosh Boyer2011-07-121-3/+2Star
| | | | | | | | | | | | | | | | | | | | | | | | Move the "Checking link..." printk to the function that actually checks the linke. Reported-by: Ayman El-Khashab <ayman@elkhashab.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
| * | powerpc/4xx: Add check_link to struct ppc4xx_pciex_hwopsTony Breeds2011-07-121-65/+83
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | All current pcie controllers unconditionally use SDR to check the link and poll for reset. Refactor the code to include device reset in the port_init_hw() op and add a new check_link() op. This will make room fro new controllers that do not use SDR for these operations. Tested on 460ex. Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
* / treewide: Convert uses of struct resource to resource_size(ptr)Joe Perches2011-06-101-8/+8
|/ | | | | | | | | | | | | | | | | | | | Several fixes as well where the +1 was missing. Done via coccinelle scripts like: @@ struct resource *ptr; @@ - ptr->end - ptr->start + 1 + resource_size(ptr) and some grep and typing. Mostly uncompiled, no cross-compilers. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* powerpc/44x: Adding PCI-E support for PowerPC 460SX based SOC.Tirumala Marri2010-05-071-0/+119
| | | | | | | | Add support for PCI-e on the AMCC 460SX boards Signed-off-by: Tirumala Marri <tmarri@amcc.com> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
* include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* powerpc/4xx: Add pcix type 1 transactionsStef van Os2010-01-291-1/+2
| | | | | | | | | | | Some of the newer 4xx pci cores need an explicit bit set to send type 1 transactions instead of just comparing the bus numbers. This patch enables type 1 transations for pcix nodes, thus enabling devices behind PCI bridges. Signed-off-by: Stef van Os <stef.van.os@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Remove unnecessary semicolonsJoe Perches2009-07-081-2/+2
| | | | | | Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/pci: Clean up direct access to sysdata by 4xx platformsKumar Gala2009-05-211-2/+2
| | | | | | | | | | We shouldn't directly access sysdata to get the pci_controller. Instead use pci_bus_to_host() for this purpose. In the future we might have sysdata be a device_node to match ppc64 and unify the code between ppc32 & ppc64. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* Merge commit 'origin/master' into nextBenjamin Herrenschmidt2009-03-111-0/+17
|\
| * powerpc/44x: Fix address decoding setup of PCI 2.x cellsBenjamin Herrenschmidt2009-02-261-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PCI 2.x cells used on some 44x SoCs only let us configure the decode for the low 32-bit of the incoming PLB addresses. The top 4 bits (this is a 36-bit bus) are hard wired to different values depending on the specific SoC in use. Our code used to work "by accident" until I added support for the ISA memory holes and while at it added more validity checking of the addresses. This patch should bring it back to working condition. It still relies on the device-tree being correct but that's somewhat a pre-requisite for anything to work anyway. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
* | powerpc/4xx: Enable PCI domains on 4xxBenjamin Herrenschmidt2009-02-141-0/+2
|/ | | | | | | | | | 4xx chips commonly now have multiple PHBs, there is no reason to not enable PCI domains on them. The main issue with PCI domains is X but currently its already somewhat busted for other reasons such as the 36-bit physical address space, which I'm fixing separately. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
* powerpc/4xx: Add support for ISA holes on 4xx PCI/X/EBenjamin Herrenschmidt2008-12-041-98/+208
| | | | | | | | | | | | | | | | | This adds support for ISA memory holes on the PCI, PCI-X and PCI-E busses of the 4xx platforms. The patch includes changes to the Bamboo and Canyonlands device-trees to add such a hole, others can be updated separately. The ISA memory hole is an additional outbound window configured in the bridge to generate PCI cycles in the low memory addresses, thus allowing to access things such as the hard-decoded VGA aperture at 0xa0000..0xbffff or other similar things. It's made accessible to userspace via the new legacy_mem file in sysfs for which support was added by a previous patch. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
* Merge branch 'core-v28-for-linus' of ↵Linus Torvalds2008-10-171-10/+6Star
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: do_generic_file_read: s/EINTR/EIO/ if lock_page_killable() fails softirq, warning fix: correct a format to avoid a warning softirqs, debug: preemption check x86, pci-hotplug, calgary / rio: fix EBDA ioremap() IO resources, x86: ioremap sanity check to catch mapping requests exceeding, fix IO resources, x86: ioremap sanity check to catch mapping requests exceeding the BAR sizes softlockup: Documentation/sysctl/kernel.txt: fix softlockup_thresh description dmi scan: warn about too early calls to dmi_check_system() generic: redefine resource_size_t as phys_addr_t generic: make PFN_PHYS explicitly return phys_addr_t generic: add phys_addr_t for holding physical addresses softirq: allocate less vectors IO resources: fix/remove printk printk: robustify printk, update comment printk: robustify printk, fix #2 printk: robustify printk, fix printk: robustify printk Fixed up conflicts in: arch/powerpc/include/asm/types.h arch/powerpc/platforms/Kconfig.cputype manually.
| * generic: redefine resource_size_t as phys_addr_tJeremy Fitzhardinge2008-09-141-10/+6Star
| | | | | | | | | | | | | | | | There's no good reason why a resource_size_t shouldn't just be a physical address, so simply redefine it in terms of phys_addr_t. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | powerpc/4xx: Allow 4xx PCI bridge to be disabled via device treeMatthias Fuchs2008-10-021-1/+8
| | | | | | | | | | | | | | | | | | | | | | This patch allows the 4xx (conventional) PCI bridge to be disabled via the device tree. This is needed for 4xx PCI adapter hardware. Use the PCI node's status property to disable the PCI bridge. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
* | powerpc/4xx: Necessary fixes to PCI for 4GB RAM sizeIlya Yanok2008-09-021-7/+6Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The declaration of total_memory removed. Now including <mm/mmu_decl.h> instead. Since total_memory is a phys_addr_t which is 64-bit on 44x and is_power_of_2() works with u32 so I just inlined (size & (size-1)) != 0 instead. Also this patch fixes default initialization: res->end should be 0x7fffffff not 0x80000000. Signed-off-by: Ilya Yanok <yanok@emcraft.com> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
* | powerpc/44x: AMCC PPC460GT/EX PCI-E de-emphasis adjustment fixTirumala R Marri2008-08-281-5/+5
|/ | | | | | | | | | | During recent tests with PCI-E , it has been found the DRV + De-Emphasis values are not optimum. These new values are tested thouroughly. Signed-off-by: Tirumala R Marri <tmarri@amcc.com> Signed-off-by: Feng Kan fkan@amcc.com Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
* powerpc/4xx: Workaround for PPC440EPx/GRx PCI_28 ErrataJosh Boyer2008-06-181-0/+5
| | | | | | | | | | | | | | | | | | | | | | | The 440EPx/GRx chips don't support PCI MRM commands. Drivers determine this by looking for a zero value in the PCI cache line size register. However, some drivers write to this register upon initialization. This can cause MRMs to be used on these chips, which may cause deadlocks on PLB4. The workaround implemented here introduces a new indirect_type flag, called PPC_INDIRECT_TYPE_BROKEN_MRM. This is set in the pci_controller structure in the pci fixup function for 4xx PCI bridges by determining if the bridge is compatible with 440EPx/GRx. The flag is checked in the indirect_write_config function, and forces any writes to the PCI_CACHE_LINE_SIZE register to be zero, which will disable MRMs for these chips. A similar workaround has been tested by AMCC on various PCI cards, such as the Silicon Image ATA card and Intel E1000 GIGE card. Hangs were seen with the Silicon Image card, and MRMs were seen on the bus with a PCI analyzer. With the workaround in place, the card functioned properly and only Memory Reads were seen on the bus with the analyzer. Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
* powerpc/4xx: PCIe driver now detects if a port is disabled via the dev-treeStefan Roese2008-06-111-0/+9
| | | | | | | | | | | | This patch add a check to the PPC4xx PCIe driver to detect if the port is disabled via the device-tree. This is needed for the AMCC Canyonlands board which has an option to either select 2 PCIe ports or 1 PCIe port and one SATA port. The SATA port and the 1st PCIe port pins are multiplexed so we can't start both drivers. Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
* [POWERPC] 4xx: Add endpoint support to 4xx PCIe driverStefan Roese2008-05-061-49/+131
| | | | | | | | | | | | | | | This patch adds basic endpoint support to the 4xx PCIe driver. This is done by checking the device_type property of the PCIe device node ("pci" for root-complex and "pci-endpoint" for endpoint configuration). Note: Currently we map a fixed 64MByte window to PLB address 0 (SDRAM). This should probably be configurable via a dts property. Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
* [POWERPC] 4xx: Fix PESDRn_UTLSET1 register setup on 460EX/GTStefan Roese2008-04-031-6/+4Star
| | | | | | | | | The patch fixes a bug, where the PESDRn_UTLSET1 register was setup wrongly resulting in a non working PCIe port 1. With this fix both PCIe ports work fine again. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
* [POWERPC] 4xx: Only reset PCIe PHY on 405EX systems when no link is detectedStefan Roese2008-04-031-8/+0Star
| | | | | | | | | | | Since the arch/powerpc PCI subsystem now does a complete re-assignment of the resources, we can move from the unconditional PCIe PHY reset to the conditional version. Now the PHY is only reset, if no link is established yet. An additional PHY reset (one is already done in U-Boot) leads to problems with some Atheros PCIe boards and some HP FPGA PCIe designs. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
* [POWERPC] 4xx: Use dcri_clrset() for PCIe indirect dcr read/modify/write accessValentine Barshak2008-03-261-8/+5Star
| | | | | | | Use dcri_clrset() for PCIe SDR0 read/modify/write access. Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
* [POWERPC] 4xx: Add 460EX PCIe support to 4xx pci driverStefan Roese2008-03-261-0/+114
| | | | | | | | | | | | | | | | All this code is needed to properly initialize the 460EX PCIe host bridge(s). We re-initialize all ports again, even though this has been done in the bootloader (U-Boot) before. This way we make sure, that we always run the latest init code in Linux and don't depend on code versions from U-Boot. Unfortunately all IBM/AMCC chips currently supported in this PCIe driver need a different reset-/init-sequence. Tested on AMCC Canyonlands eval board. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
* [POWERPC] 4xx: PCIe: Increase max busses per port to 64Stefan Roese2008-01-081-1/+1
| | | | | | | | | | | Because of how big mapping the config space is (1M per bus), we limit how many busses we support for now. In the long run, we could replace that with something akin to kmap_atomic instead. This patch changes the limit from currently 16 to 64. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
* [POWERPC] 4xx: Set ibpre for 405EX in 4xx PCIe driverStefan Roese2007-12-231-0/+2
| | | | | | | | This patch sets the ibpre flag (Inbound Presence) for the 405EX in the 4xx PCIe driver. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
* [POWERPC] 4xx: Add 440SPe revA runtime detection to PCIeStefan Roese2007-12-231-8/+17
| | | | | | | | | | | | This patch adds runtime detection of the 440SPe revision A chips. These chips are equipped with a slighly different PCIe core and need special/ different initialization. The compatible node is changed to "plb-pciex-440spe" ("A" and "B" dropped). This is needed for boards that can be equipped with both PPC revisions like the AMCC Yucca. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
* [POWERPC] 4xx: PCI-E Link setup improvementsBenjamin Herrenschmidt2007-12-231-89/+131
| | | | | | | | | | | | | | This improves the way the 4xx PCI-E code handles checking for a link and adds explicit testing of CRS result codes on config space accesses. This should make it more reliable. Also, bridges with no link are now still created, though config space accesses beyond the root complex are filtered. This is one step toward eventually supporting hotplug. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
* [POWERPC] 4xx: PLB to PCI Express supportBenjamin Herrenschmidt2007-12-231-18/+976
| | | | | | | | | | | | | | | | | | | | | | | | | This adds to the previous 2 patches the support for the 4xx PCI Express cells as found in the 440SPe revA, revB and 405EX. Unfortunately, due to significant differences between these, and other interesting "features" of those pieces of HW, the code isn't as simple as it is for PCI and PCI-X and some of the functions differ significantly between the 3 implementations. Thus, not only this code can only support those 3 implementations for now and will refuse to operate on any other, but there are added ifdef's to avoid the bloat of building a fairly large amount of code on platforms that don't need it. Also, this code currently only supports fully initializing root complex nodes, not endpoint. Some more code will have to be lifted from the arch/ppc implementation to add the endpoint support, though it's mostly differences in memory mapping, and the question on how to represent endpoint mode PCI in the device-tree is thus open. Many thanks to Stefan Roese for testing & fixing up the 405EX bits ! Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
* [POWERPC] 4xx: PLB to PCI 2.x supportBenjamin Herrenschmidt2007-12-231-1/+179
| | | | | | | | This adds to the previous patch the support for the 4xx PCI 2.x bridges. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
* [POWERPC] 4xx: PLB to PCI-X supportBenjamin Herrenschmidt2007-12-231-0/+339
This adds base support code for the 4xx PCI-X bridge. It also provides placeholders for the PCI and PCI-E version but they aren't supported with this patch. The bridges are configured based on device-tree properties. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-10 22:57:28 +0200