summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/sysdev
Commit message (Collapse)AuthorAgeFilesLines
* Merge branch 'for-linus' of ↵Linus Torvalds2014-10-1213-68/+116
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux Pull powerpc updates from Michael Ellerman: "Here's a first pull request for powerpc updates for 3.18. The bulk of the additions are for the "cxl" driver, for IBM's Coherent Accelerator Processor Interface (CAPI). Most of it's in drivers/misc, which Greg & Arnd maintain, Greg said he was happy for us to take it through our tree. There's the usual minor cleanups and fixes, including a bit of noise in drivers from some of those. A bunch of updates to our EEH code, which has been getting more testing. Several nice speedups from Anton, including 20% in clear_page(). And a bunch of updates for freescale from Scott" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (130 commits) cxl: Fix afu_read() not doing finish_wait() on signal or non-blocking cxl: Add documentation for userspace APIs cxl: Add driver to Kbuild and Makefiles cxl: Add userspace header file cxl: Driver code for powernv PCIe based cards for userspace access cxl: Add base builtin support powerpc/mm: Add hooks for cxl powerpc/opal: Add PHB to cxl mode call powerpc/mm: Add new hash_page_mm() powerpc/powerpc: Add new PCIe functions for allocating cxl interrupts cxl: Add new header for call backs and structs powerpc/powernv: Split out set MSI IRQ chip code powerpc/mm: Export mmu_kernel_ssize and mmu_linear_psize powerpc/msi: Improve IRQ bitmap allocator powerpc/cell: Make spu_flush_all_slbs() generic powerpc/cell: Move data segment faulting code out of cell platform powerpc/cell: Move spu_handle_mm_fault() out of cell platform powerpc/pseries: Use new defines when calling H_SET_MODE powerpc: Update contact info in Documentation files powerpc/perf/hv-24x7: Simplify catalog_read() ...
| * powerpc/msi: Improve IRQ bitmap allocatorIan Munsie2014-10-081-11/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently msi_bitmap_alloc_hwirqs() will round up any IRQ allocation requests to the nearest power of 2. eg. ask for 5 IRQs and you'll get 8. This wastes a lot of IRQs which can be a scarce resource. For cxl we may require multiple IRQs for every context that is attached to the accelerator. There may be 1000s of contexts attached, hence we can easily run out of IRQs, especially if we are needlessly wasting them. This changes the msi_bitmap_alloc_hwirqs() to allocate only the required number of IRQs, hence avoiding this wastage. It keeps the natural alignment requirement though. Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * Merge branch 'next' of ↵Michael Ellerman2014-10-043-47/+55
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/scottwood/linux.git Freescale updates from Scott (27 commits): "Highlights include DMA32 zone support (SATA, USB, etc now works on 64-bit FSL kernels), MSI changes, 8xx optimizations and cleanup, t104x board support, and PrPMC PCI enumeration."
| | * Revert "powerpc/fsl_msi: spread msi ints across different MSIRs"Scott Wood2014-09-193-50/+11Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit c822e73731fce3b49a4887140878d084d8a44c08. This commit conflicted with a bitmap allocator change that partially accomplishes the same thing, but which does so more correctly. Revert this one until it can be respun on top of the correct change. Signed-off-by: Scott Wood <scottwood@freescale.com>
| | * powerpc/fsl_msi: spread msi ints across different MSIRsTudor Laurentiu2014-09-053-11/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allocate msis such that each time a new interrupt is requested, the SRS (MSIR register select) to be used is allocated in a round-robin fashion. The end result is that the msi interrupts will be spread across distinct MSIRs with the main benefit that now users can set affinity to each msi int through the mpic irq backing up the MSIR register. This is achieved with the help of a newly introduced msi bitmap api that allows specifying the starting point when searching for a free msi interrupt. Signed-off-by: Laurentiu Tudor <Laurentiu.Tudor@freescale.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Mihai Caraman <mihai.caraman@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
| | * powerpc/fsl_msi: show more meaningful names in /proc/interruptsTudor Laurentiu2014-09-051-1/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rename the irq controller associated with a MSI interrupt to fsl-msi-<V>, where <V> is the virq of the cascade irq backing up this MSI interrupt. This way, one can set the affinity of a MSI through the cascade irq associated with said MSI interrupt. Given this example /proc/interrupts snippet: CPU0 CPU1 CPU2 CPU3 16: 0 0 0 0 OpenPIC 16 Edge mpic-error-int 17: 0 4 0 0 fsl-msi-224 0 Edge eth0-rx-0 18: 0 5 0 0 fsl-msi-225 1 Edge eth0-tx-0 19: 0 2 0 0 fsl-msi-226 2 Edge eth0 [...] 224: 0 11 0 0 OpenPIC 224 Edge fsl-msi-cascade 225: 0 0 0 0 OpenPIC 225 Edge fsl-msi-cascade 226: 0 0 0 0 OpenPIC 226 Edge fsl-msi-cascade [...] To change the affinity of MSI interrupt 17 (having the irq controller named "fsl-msi-224") instead of writing /proc/irq/17/smp_affinity, use the associated MSI cascade irq, in this case, interrupt 224, e.g.: echo 6 > /proc/irq/224/smp_affinity Note that a MSI cascade irq covers several MSI interrupts, so changing the affinity on the cascade will impact all of the associated MSI interrupts. Signed-off-by: Laurentiu Tudor <Laurentiu.Tudor@freescale.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Mihai Caraman <mihai.caraman@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
| | * powerpc/fsl_msi: change the irq handler from chained to normalTudor Laurentiu2014-09-051-38/+18Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As we do for other fsl-mpic related cascaded irqchips (e.g. error ints, mpic timers), use a normal irq handler for msi irqs too. This brings some advantages such as mask/unmask/ack/eoi and irq state taken care behind the scenes, kstats updates a.s.o plus access to features provided by mpic, such as affinity. Signed-off-by: Laurentiu Tudor <Laurentiu.Tudor@freescale.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Mihai Caraman <mihai.caraman@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
| | * powerpc/fsl_msi: reorganize structs to improve clarity and flexibilityTudor Laurentiu2014-09-052-7/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Store cascade_data in an array inside the driver data for later use. Get rid of the msi_virq array since now we can encapsulate the virqs in the cascade_data directly and access them through the array mentioned earlier. Signed-off-by: Laurentiu Tudor <Laurentiu.Tudor@freescale.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Mihai Caraman <mihai.caraman@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
| | * powerpc: fsl_pci: Add forced PCI Agent enumerationAaron Sierra2014-09-041-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following commit prevents the MPC8548E on the XPedite5200 PrPMC module from enumerating its PCI/PCI-X bus: powerpc/fsl-pci: use 'Header Type' to identify PCIE mode The previous patch prevents any Freescale PCI-X bridge from enumerating the bus, if it is hardware strapped into Agent mode. In PCI-X, the Host is responsible for driving the PCI-X initialization pattern to devices on the bus, so that they know whether to operate in conventional PCI or PCI-X mode as well as what the bus timing will be. For a PCI-X PrPMC, the pattern is driven by the mezzanine carrier it is installed onto. Therefore, PrPMCs are PCI-X Agents, but one per system may still enumerate the bus. This patch causes the device node of any PCI/PCI-X bridge strapped into Agent mode to be checked for the fsl,pci-agent-force-enum property. If the property is present in the node, the bridge will be allowed to enumerate the bus. Cc: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
| | * powerpc/fsl_msi: support vmpic msi with mpic 4.3Tudor Laurentiu2014-09-041-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The new MSI block in MPIC 4.3 added the MSIIR1 register, with a different layout, in order to support 16 MSIR registers. The msi binding was also updated so that the "reg" reflects the newly introduced MSIIR1 register. Virtual machines advertise these msi nodes by using the compatible "fsl,vmpic-msi-v4.3" so add support for it. Signed-off-by: Laurentiu Tudor <Laurentiu.Tudor@freescale.com> Cc: Scott Wood <scottwood@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
| * | powerpc/powernv: Don't call generic code on offline cpusPaul Mackerras2014-09-251-0/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On PowerNV platforms, when a CPU is offline, we put it into nap mode. It's possible that the CPU wakes up from nap mode while it is still offline due to a stray IPI. A misdirected device interrupt could also potentially cause it to wake up. In that circumstance, we need to clear the interrupt so that the CPU can go back to nap mode. In the past the clearing of the interrupt was accomplished by briefly enabling interrupts and allowing the normal interrupt handling code (do_IRQ() etc.) to handle the interrupt. This has the problem that this code calls irq_enter() and irq_exit(), which call functions such as account_system_vtime() which use RCU internally. Use of RCU is not permitted on offline CPUs and will trigger errors if RCU checking is enabled. To avoid calling into any generic code which might use RCU, we adopt a different method of clearing interrupts on offline CPUs. Since we are on the PowerNV platform, we know that the system interrupt controller is a XICS being driven directly (i.e. not via hcalls) by the kernel. Hence this adds a new icp_native_flush_interrupt() function to the native-mode XICS driver and arranges to call that when an offline CPU is woken from nap. This new function reads the interrupt from the XICS. If it is an IPI, it clears the IPI; if it is a device interrupt, it prints a warning and disables the source. Then it does the end-of-interrupt processing for the interrupt. The other thing that briefly enabling interrupts did was to check and clear the irq_happened flag in this CPU's PACA. Therefore, after flushing the interrupt from the XICS, we also clear all bits except the PACA_IRQ_HARD_DIS (interrupts are hard disabled) bit from the irq_happened flag. The PACA_IRQ_HARD_DIS flag is set by power7_nap() and is left set to indicate that interrupts are hard disabled. This means we then have to ignore that flag in power7_nap(), which is reasonable since it doesn't indicate that any interrupt event needs servicing. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * | powerpc: make of_device_ids constUwe Kleine-König2014-09-256-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | of_device_ids (i.e. compatible strings and the respective data) are not supposed to change at runtime. All functions working with of_device_ids provided by <linux/of.h> work with const of_device_ids. This allows to mark all struct of_device_id const, too. While touching these line also put the __init annotation at the right position where necessary. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * | powerpc: Export dcr_ind_lock to fix build errorPranith Kumar2014-09-251-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Fix build error caused by missing export: ERROR: "dcr_ind_lock" [drivers/net/ethernet/ibm/emac/ibm_emac.ko] undefined! Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * | powerpc: Make a bunch of things staticAnton Blanchard2014-09-252-4/+4
| | | | | | | | | | | | | | | Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* | | PCI/MSI/PPC: Remove arch_msi_check_device()Alexander Gordeev2014-10-015-60/+28Star
|/ / | | | | | | | | | | | | | | | | Move MSI checks from arch_msi_check_device() to arch_setup_msi_irqs(). This makes the code more compact and allows removing arch_msi_check_device() from generic MSI code. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au>
* | Merge remote-tracking branch 'scott/next' into nextBenjamin Herrenschmidt2014-08-052-3/+3
|\| | | | | | | | | | | | | | | Scott writes: Highlights include e6500 hardware threading support, an e6500 TLB erratum workaround, corenet error reporting, support for a new board, and some minor fixes.
| * powerpc/fsl-pci: Correct use of ! and &Himangi Saraogi2014-07-301-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In commit ae91d60ba88ef0bdb1b5e9b2363bd52fc45d2af7, a bug was fixed that involved converting !x & y to !(x & y). The code below shows the same pattern, and thus should perhaps be fixed in the same way. This is not tested and clearly changes the semantics, so it is only something to consider. The Coccinelle semantic patch that makes this change is as follows: // <smpl> @@ expression E1,E2; @@ ( !E1 & !E2 | - !E1 & E2 + !(E1 & E2) ) // </smpl> Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
| * powerpc/mpic_msgr: Use kcalloc and correct the argument to sizeofHimangi Saraogi2014-07-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mpic_msgrs has type struct mpic_msgr **, not struct mpic_msgr *, so the elements of the array should have pointer type, not structure type. The advantage of kcalloc is, that will prevent integer overflows which could result from the multiplication of number of elements and size and it is also a bit nicer to read. The Coccinelle semantic patch that makes the first change is as follows: // <smpl> @disable sizeof_type_expr@ type T; T **x; @@ x = <+...sizeof( - T + *x )...+> // </smpl> Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Scott Wood <scottwood@freescale.com>
* | Merge branch 'merge' into nextBenjamin Herrenschmidt2014-07-111-0/+5
|\ \ | |/ |/|
| * powerpc/kmemleak: Do not scan the DART tableCatalin Marinas2014-06-241-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | The DART table allocation is registered to kmemleak via the memblock_alloc_base() call. However, the DART table is later unmapped and dart_tablebase VA no longer accessible. This patch tells kmemleak not to scan this block and avoid an unhandled paging request. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* | powerpc/8xx: Remove empty asm/mpc8xx.hScott Wood2014-06-261-1/+0Star
|/ | | | | | | | | | | m8xx_pcmcia_ops was the only thing in this file (other than a comment that describes a usage that doesn't match the file's contents); now that m8xx_pcmcia_ops is gone, remove the empty file. Signed-off-by: Scott Wood <scottwood@freescale.com> Cc: Pantelis Antoniou <pantelis.antoniou@gmail.com> Cc: Vitaly Bordug <vitb@kernel.crashing.org> Cc: netdev@vger.kernel.org
* Merge branch 'next' of ↵Linus Torvalds2014-06-131-1/+8
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull more powerpc updates from Ben Herrenschmidt: "Here are the remaining bits I was mentioning earlier. Mostly bug fixes and new selftests from Michael (yay !). He also removed the WSP platform and A2 core support which were dead before release, so less clutter. One little "feature" I snuck in is the doorbell IPI support for non-virtualized P8 which speeds up IPIs significantly between threads of a core" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (34 commits) powerpc/book3s: Fix some ABIv2 issues in machine check code powerpc/book3s: Fix guest MC delivery mechanism to avoid soft lockups in guest. powerpc/book3s: Increment the mce counter during machine_check_early call. powerpc/book3s: Add stack overflow check in machine check handler. powerpc/book3s: Fix machine check handling for unhandled errors powerpc/eeh: Dump PE location code powerpc/powernv: Enable POWER8 doorbell IPIs powerpc/cpuidle: Only clear LPCR decrementer wakeup bit on fast sleep entry powerpc/powernv: Fix killed EEH event powerpc: fix typo 'CONFIG_PMAC' powerpc: fix typo 'CONFIG_PPC_CPU' powerpc/powernv: Don't escalate non-existing frozen PE powerpc/eeh: Report frozen parent PE prior to child PE powerpc/eeh: Clear frozen state for child PE powerpc/powernv: Reduce panic timeout from 180s to 10s powerpc/xmon: avoid format string leaking to printk selftests/powerpc: Add tests of PMU EBBs selftests/powerpc: Add support for skipping tests selftests/powerpc: Put the test in a separate process group selftests/powerpc: Fix instruction loop for ABIv2 (LE) ...
| * powerpc/powernv: Enable POWER8 doorbell IPIsMichael Neuling2014-06-111-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables POWER8 doorbell IPIs on powernv. Since doorbells can only IPI within a core, we test to see when we can use doorbells and if not we fall back to XICS. This also enables hypervisor doorbells to wakeup us up from nap/sleep via the LPCR PECEDH bit. Based on tests by Anton, the best case IPI latency between two threads dropped from 894ns to 512ns. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2014-06-121-32/+0Star
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking updates from David Miller: 1) Seccomp BPF filters can now be JIT'd, from Alexei Starovoitov. 2) Multiqueue support in xen-netback and xen-netfront, from Andrew J Benniston. 3) Allow tweaking of aggregation settings in cdc_ncm driver, from Bjørn Mork. 4) BPF now has a "random" opcode, from Chema Gonzalez. 5) Add more BPF documentation and improve test framework, from Daniel Borkmann. 6) Support TCP fastopen over ipv6, from Daniel Lee. 7) Add software TSO helper functions and use them to support software TSO in mvneta and mv643xx_eth drivers. From Ezequiel Garcia. 8) Support software TSO in fec driver too, from Nimrod Andy. 9) Add Broadcom SYSTEMPORT driver, from Florian Fainelli. 10) Handle broadcasts more gracefully over macvlan when there are large numbers of interfaces configured, from Herbert Xu. 11) Allow more control over fwmark used for non-socket based responses, from Lorenzo Colitti. 12) Do TCP congestion window limiting based upon measurements, from Neal Cardwell. 13) Support busy polling in SCTP, from Neal Horman. 14) Allow RSS key to be configured via ethtool, from Venkata Duvvuru. 15) Bridge promisc mode handling improvements from Vlad Yasevich. 16) Don't use inetpeer entries to implement ID generation any more, it performs poorly, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1522 commits) rtnetlink: fix userspace API breakage for iproute2 < v3.9.0 tcp: fixing TLP's FIN recovery net: fec: Add software TSO support net: fec: Add Scatter/gather support net: fec: Increase buffer descriptor entry number net: fec: Factorize feature setting net: fec: Enable IP header hardware checksum net: fec: Factorize the .xmit transmit function bridge: fix compile error when compiling without IPv6 support bridge: fix smatch warning / potential null pointer dereference via-rhine: fix full-duplex with autoneg disable bnx2x: Enlarge the dorq threshold for VFs bnx2x: Check for UNDI in uncommon branch bnx2x: Fix 1G-baseT link bnx2x: Fix link for KR with swapped polarity lane sctp: Fix sk_ack_backlog wrap-around problem net/core: Add VF link state control policy net/fsl: xgmac_mdio is dependent on OF_MDIO net/fsl: Make xgmac_mdio read error message useful net_sched: drr: warn when qdisc is not work conserving ...
| * powerpc/fsl: fsl_soc: remove 'fixed-link' parsing codeFlorian Fainelli2014-05-221-32/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Parsing and registration of fixed PHY devices was needed with the use of of_phy_connect_fixed_link() because this function was using the designated PHY address identifier (first cell of the property) as the address to bind the PHY on the emulated bus. Since commit 3be2a49e5c08d268f8af0dd4fe89a24ea8cdc339 ("of: provide a binding for fixed link PHYs") a new pair of functions has been introduced which allows for dynamic address allocation of these fixed PHY devices, but also parses the old 'fixed-link' 5-digit property. Registration of fixed PHY early in platform code was needed because we could not issue a fixed MDIO bus re-scan within network drivers. The fixed PHYs had to be registered before the network drivers would call of_phy_connect_fixed_link(). All of these caveats are solved now, such that we can safely remove of_add_fixed_phys() now. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'next' of ↵Linus Torvalds2014-06-118-15/+255
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc updates from Ben Herrenschmidt: "Here is the bulk of the powerpc changes for this merge window. It got a bit delayed in part because I wasn't paying attention, and in part because I discovered I had a core PCI change without a PCI maintainer ack in it. Bjorn eventually agreed it was ok to merge it though we'll probably improve it later and I didn't want to rebase to add his ack. There is going to be a bit more next week, essentially fixes that I still want to sort through and test. The biggest item this time is the support to build the ppc64 LE kernel with our new v2 ABI. We previously supported v2 userspace but the kernel itself was a tougher nut to crack. This is now sorted mostly thanks to Anton and Rusty. We also have a fairly big series from Cedric that add support for 64-bit LE zImage boot wrapper. This was made harder by the fact that traditionally our zImage wrapper was always 32-bit, but our new LE toolchains don't really support 32-bit anymore (it's somewhat there but not really "supported") so we didn't want to rely on it. This meant more churn that just endian fixes. This brings some more LE bits as well, such as the ability to run in LE mode without a hypervisor (ie. under OPAL firmware) by doing the right OPAL call to reinitialize the CPU to take HV interrupts in the right mode and the usual pile of endian fixes. There's another series from Gavin adding EEH improvements (one day we *will* have a release with less than 20 EEH patches, I promise!). Another highlight is the support for the "Split core" functionality on P8 by Michael. This allows a P8 core to be split into "sub cores" of 4 threads which allows the subcores to run different guests under KVM (the HW still doesn't support a partition per thread). And then the usual misc bits and fixes ..." [ Further delayed by gmail deciding that BenH is a dirty spammer. Google knows. ] * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (155 commits) powerpc/powernv: Add missing include to LPC code selftests/powerpc: Test the THP bug we fixed in the previous commit powerpc/mm: Check paca psize is up to date for huge mappings powerpc/powernv: Pass buffer size to OPAL validate flash call powerpc/pseries: hcall functions are exported to modules, need _GLOBAL_TOC() powerpc: Exported functions __clear_user and copy_page use r2 so need _GLOBAL_TOC() powerpc/powernv: Set memory_block_size_bytes to 256MB powerpc: Allow ppc_md platform hook to override memory_block_size_bytes powerpc/powernv: Fix endian issues in memory error handling code powerpc/eeh: Skip eeh sysfs when eeh is disabled powerpc: 64bit sendfile is capped at 2GB powerpc/powernv: Provide debugfs access to the LPC bus via OPAL powerpc/serial: Use saner flags when creating legacy ports powerpc: Add cpu family documentation powerpc/xmon: Fix up xmon format strings powerpc/powernv: Add calls to support little endian host powerpc: Document sysfs DSCR interface powerpc: Fix regression of per-CPU DSCR setting powerpc: Split __SYSFS_SPRSETUP macro arch: powerpc/fadump: Cleaning up inconsistent NULL checks ...
| * | powerpc/mpic: Don't init the fsl error int until after mpic initScott Wood2014-05-231-4/+4
| | | | | | | | | | | | | | | | | | | | | Besides other potential problems, if MPIC_NO_RESET is not set, the error interrupt will be masked after it is requested. Signed-off-by: Scott Wood <scottwood@freescale.com>
| * | fsl/pci: fix RC cannot detect PME message comingWang Dongsheng2014-05-231-2/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | PCI controller disable PME message report feature, that shouldn't have happened. Fix it and enable PME message report feature. Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
| * | powerpc/rmu: Fix the error memory free parametersLiu Gang2014-05-231-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are error parameters should be corrected when calling dma_free_coherent to free rmu rx-ring buffers in fsl_open_inb_mbox() function. Signed-off-by: Liu Gang <Gang.Liu@freescale.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
| * | powerpc/fsl-rio: Fix fsl_rio_setup error paths and use-after-unmapScott Wood2014-05-091-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Several of the error paths from fsl_rio_setup are missing error messages. Worse, fsl_rio_setup initializes several global pointers and does not NULL them out after freeing/unmapping on error. This caused fsl_rio_mcheck_exception() to crash when accessing rio_regs_win which was non-NULL but had been unmapped. Signed-off-by: Scott Wood <scottwood@freescale.com> Cc: Liu Gang <Gang.Liu@freescale.com> --- Liu Gang, are you sure all of these error conditions are fatal? Why does the rio driver fail if rmu is not present (e.g. on t4240)?
| * | powerpc: Added PCI MSI support using the HSTA moduleAlistair Popple2014-05-014-2/+228
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PPC476GTR SoC supports message signalled interrupts (MSI) by writing to special addresses within the High Speed Transfer Assist (HSTA) module. This patch adds support for PCI MSI with a new system device. The DMA window is also updated to allow access to the entire 42-bit address range to allow PCI devices write access to the HSTA module. Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | IBM Akebono: Add the Akebono platformAlistair Popple2014-05-011-3/+10
| |/ | | | | | | | | | | | | This patch adds support for the IBM Akebono board. Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* / of: Stop naming platform_device using dcr addressGrant Likely2014-05-231-3/+3
|/ | | | | | | | | | | | | | | There is now a way to ensure all platform devices get a unique name when populated from the device tree, and the DCR_NATIVE code path is broken anyway. PowerPC Cell (PS3) is the only platform that actually uses this path. Most likely nobody will notice if it is killed. Remove the code and associated ugly #ifdef. The user-visible impact of this patch is that any DCR device on Cell will get a new name in the /sys/devices hierarchy. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/4xx: Fix section mismatch in ppc4xx_pci.cAlistair Popple2014-04-281-1/+1
| | | | | | | | | | | | | | | | | | | | This patch fixes this section mismatch: WARNING: vmlinux.o(.text+0x1efc4): Section mismatch in reference from the function apm821xx_pciex_init_port_hw() to the function .init.text:ppc4xx_pciex_wait_on_sdr.isra.9() The function apm821xx_pciex_init_port_hw() references the function __init ppc4xx_pciex_wait_on_sdr.isra.9(). This is often because apm821xx_pciex_init_port_hw lacks a __init annotation or the annotation of ppc4xx_pciex_wait_on_sdr.isra.9 is wrong. apm821xx_pciex_init_port_hw is only referenced by a struct in __initdata, so it should be safe to add __init to apm821xx_pciex_init_port_hw. Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* Merge branch 'merge' of ↵Linus Torvalds2014-04-091-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull more powerpc updates from Ben Herrenschmidt: "Here are a few more powerpc things for you. So you'll find here the conversion of the two new firmware sysfs interfaces to the new API for self-removing files that Greg and Tejun introduced, so they can finally remove the old one. I'm also reverting the hwmon driver for powernv. I shouldn't have merged it, I got a bit carried away here. I hadn't realized it was never CCed to the relevant maintainer(s) and list(s), and happens to have some issues so I'm taking it out and it will come back via the proper channels. The rest is a bunch of LE fixes (argh, some of the new stuff was broken on LE, I really need to start testing LE myself !) and various random fixes here and there. Finally one bit that's not strictly a fix, which is the HVC OPAL change to "kick" the HVC thread when the firmware tells us there is new incoming data. I don't feel like waiting for this one, it's simple enough, and it makes a big difference in console responsiveness which is good for my nerves" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (26 commits) powerpc/powernv Adapt opal-elog and opal-dump to new sysfs_remove_file_self Revert "powerpc/powernv: hwmon driver for power values, fan rpm and temperature" power, sched: stop updating inside arch_update_cpu_topology() when nothing to be update powerpc/le: Avoid creatng R_PPC64_TOCSAVE relocations for modules. arch/powerpc: Use RCU_INIT_POINTER(x, NULL) in platforms/cell/spu_syscalls.c powerpc/opal: Add missing include powerpc: Convert last uses of __FUNCTION__ to __func__ powerpc: Add lq/stq emulation powerpc/powernv: Add invalid OPAL call powerpc/powernv: Add OPAL message log interface powerpc/book3s: Fix mc_recoverable_range buffer overrun issue. powerpc: Remove dead code in sycall entry powerpc: Use of_node_init() for the fakenode in msi_bitmap.c powerpc/mm: NUMA pte should be handled via slow path in get_user_pages_fast() powerpc/powernv: Fix endian issues with sensor code powerpc/powernv: Fix endian issues with OPAL async code tty/hvc_opal: Kick the HVC thread on OPAL console events powerpc/powernv: Add opal_notifier_unregister() and export to modules powerpc/ppc64: Do not turn AIL (reloc-on interrupts) too early powerpc/ppc64: Gracefully handle early interrupts ...
| * powerpc: Use of_node_init() for the fakenode in msi_bitmap.cLi Zhong2014-04-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch uses of_node_init() to initialize the kobject in the fake node used in test_of_node(), to avoid following kobject warning. [ 0.897654] kobject: '(null)' (c0000007ca183a08): is not initialized, yet kobject_put() is being called. [ 0.897682] ------------[ cut here ]------------ [ 0.897688] WARNING: at lib/kobject.c:670 [ 0.897692] Modules linked in: [ 0.897701] CPU: 4 PID: 1 Comm: swapper/0 Not tainted 3.14.0+ #1 [ 0.897708] task: c0000007ca100000 ti: c0000007ca180000 task.ti: c0000007ca180000 [ 0.897715] NIP: c00000000046a1f0 LR: c00000000046a1ec CTR: 0000000001704660 [ 0.897721] REGS: c0000007ca1835c0 TRAP: 0700 Not tainted (3.14.0+) [ 0.897727] MSR: 8000000000029032 <SF,EE,ME,IR,DR,RI> CR: 28000024 XER: 0000000d [ 0.897749] CFAR: c0000000008ef4ec SOFTE: 1 GPR00: c00000000046a1ec c0000007ca183840 c0000000014c59b8 000000000000005c GPR04: 0000000000000001 c000000000129770 0000000000000000 0000000000000001 GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000003fef GPR12: 0000000000000000 c00000000f221200 c00000000000c350 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR24: 0000000000000000 c00000000144e808 c000000000c56f20 00000000000000d8 GPR28: c000000000cd5058 0000000000000000 c000000001454ca8 c0000007ca183a08 [ 0.897856] NIP [c00000000046a1f0] .kobject_put+0xa0/0xb0 [ 0.897863] LR [c00000000046a1ec] .kobject_put+0x9c/0xb0 [ 0.897868] Call Trace: [ 0.897874] [c0000007ca183840] [c00000000046a1ec] .kobject_put+0x9c/0xb0 (unreliable) [ 0.897885] [c0000007ca1838c0] [c000000000743f9c] .of_node_put+0x2c/0x50 [ 0.897894] [c0000007ca183940] [c000000000c83954] .test_of_node+0x1dc/0x208 [ 0.897902] [c0000007ca183b80] [c000000000c839a4] .msi_bitmap_selftest+0x24/0x38 [ 0.897913] [c0000007ca183bf0] [c00000000000bb34] .do_one_initcall+0x144/0x200 [ 0.897922] [c0000007ca183ce0] [c000000000c748e4] .kernel_init_freeable+0x2b4/0x394 [ 0.897931] [c0000007ca183db0] [c00000000000c374] .kernel_init+0x24/0x130 [ 0.897940] [c0000007ca183e30] [c00000000000a2f4] .ret_from_kernel_thread+0x5c/0x68 [ 0.897947] Instruction dump: [ 0.897952] 7fe3fb78 38210080 e8010010 ebe1fff8 7c0803a6 4800014c e89f0000 3c62ff6e [ 0.897971] 7fe5fb78 3863a950 48485279 60000000 <0fe00000> 39000000 393f0038 4bffff80 [ 0.897992] ---[ end trace 1eeffdb9f825a556 ]--- Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* | rapidio: rework device hierarchy and introduce mport class of devicesAlexandre Bounine2014-04-081-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes an artificial RapidIO bus root device and establishes actual device hierarchy by providing reference to real parent devices. It also introduces device class for RapidIO controller devices (on-chip or an eternal bridge, known as "mport"). Existing implementation was sufficient for SoC-based platforms that have a single RapidIO controller. With introduction of devices using multiple RapidIO controllers and PCIe-to-RapidIO bridges the old scheme is very limiting or does not work at all. The implemented changes allow to properly reference platform's local RapidIO mport devices and provide device details needed for upper layers. This change to RapidIO device hierarchy does not break any known existing kernel or user space interfaces. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Stef van Os <stef.van.os@prodrive-technologies.com> Cc: Jerry Jacobs <jerry.jacobs@prodrive-technologies.com> Cc: Arno Tiemersma <arno.tiemersma@prodrive-technologies.com> Cc: Rob Landley <rob@landley.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge tag 'dt-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds2014-04-021-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull devicetree changes from Grant Likely: "Updates to devicetree core code. This branch contains the following notable changes: - add reserved memory binding - make struct device_node a kobject and remove legacy /proc/device-tree - ePAPR conformance fixes - update in-kernel DTC copy to version v1.4.0 - preparatory changes for dynamic device tree overlays - minor bug fixes and documentation changes The most significant change in this branch is the conversion of struct device_node to be a kobject that is exposed via sysfs and removal of the old /proc/device-tree code. This simplifies the device tree handling code and tightens up the lifecycle on device tree nodes. [updated: added fix for dangling select PROC_DEVICETREE]" * tag 'dt-for-linus' of git://git.secretlab.ca/git/linux: (29 commits) dt: Remove dangling "select PROC_DEVICETREE" of: Add support for ePAPR "stdout-path" property of: device_node kobject lifecycle fixes of: only scan for reserved mem when fdt present powerpc: add support for reserved memory defined by device tree arm64: add support for reserved memory defined by device tree of: add missing major vendors of: add vendor prefix for SMSC of: remove /proc/device-tree of/selftest: Add self tests for manipulation of properties of: Make device nodes kobjects so they show up in sysfs arm: add support for reserved memory defined by device tree drivers: of: add support for custom reserved memory drivers drivers: of: add initialization code for dynamic reserved memory drivers: of: add initialization code for static reserved memory of: document bindings for reserved-memory nodes Revert "of: fix of_update_property()" kbuild: dtbs_install: new make target ARM: mvebu: Allows to get the SoC ID even without PCI enabled of: Allows to use the PCI translator without the PCI core ...
| * of: Make device nodes kobjects so they show up in sysfsGrant Likely2014-03-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Device tree nodes are already treated as objects, and we already want to expose them to userspace which is done using the /proc filesystem today. Right now the kernel has to do a lot of work to keep the /proc view in sync with the in-kernel representation. If device_nodes are switched to be kobjects then the device tree code can be a whole lot simpler. It also turns out that switching to using /sysfs from /proc results in smaller code and data size, and the userspace ABI won't change if /proc/device-tree symlinks to /sys/firmware/devicetree/base. v7: Add missing sysfs_bin_attr_init() v6: Add __of_add_property() early init fixes from Pantelis v5: Rename firmware/ofw to firmware/devicetree Fix updating property values in sysfs v4: Fixed build error on Powerpc Fixed handling of dynamic nodes on powerpc v3: Fixed handling of duplicate attribute and child node names v2: switch to using sysfs bin_attributes which solve the problem of reporting incorrect property size. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David S. Miller <davem@davemloft.net> Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
* | Merge branch 'next' of ↵Linus Torvalds2014-04-022-24/+162
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull main powerpc updates from Ben Herrenschmidt: "This time around, the powerpc merges are going to be a little bit more complicated than usual. This is the main pull request with most of the work for this merge window. I will describe it a bit more further down. There is some additional cpuidle driver work, however I haven't included it in this tree as it depends on some work in tip/timer-core which Thomas accidentally forgot to put in a topic branch. Since I didn't want to carry all of that tip timer stuff in powerpc -next, I setup a separate branch on top of Thomas tree with just that cpuidle driver in it, and Stephen has been carrying that in next separately for a while now. I'll send a separate pull request for it. Additionally, two new pieces in this tree add users for a sysfs API that Tejun and Greg have been deprecating in drivers-core-next. Thankfully Greg reverted the patch that removes the old API so this merge can happen cleanly, but once merged, I will send a patch adjusting our new code to the new API so that Greg can send you the removal patch. Now as for the content of this branch, we have a lot of perf work for power8 new counters including support for our new "nest" counters (also called 24x7) under pHyp (not natively yet). We have new functionality when running under the OPAL firmware (non-virtualized or KVM host), such as access to the firmware error logs and service processor dumps, system parameters and sensors, along with a hwmon driver for the latter. There's also a bunch of bug fixes accross the board, some LE fixes, and a nice set of selftests for validating our various types of copy loops. On the Freescale side, we see mostly new chip/board revisions, some clock updates, better support for machine checks and debug exceptions, etc..." * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (70 commits) powerpc/book3s: Fix CFAR clobbering issue in machine check handler. powerpc/compat: 32-bit little endian machine name is ppcle, not ppc powerpc/le: Big endian arguments for ppc_rtas() powerpc: Use default set of netfilter modules (CONFIG_NETFILTER_ADVANCED=n) powerpc/defconfigs: Enable THP in pseries defconfig powerpc/mm: Make sure a local_irq_disable prevent a parallel THP split powerpc: Rate-limit users spamming kernel log buffer powerpc/perf: Fix handling of L3 events with bank == 1 powerpc/perf/hv_{gpci, 24x7}: Add documentation of device attributes powerpc/perf: Add kconfig option for hypervisor provided counters powerpc/perf: Add support for the hv 24x7 interface powerpc/perf: Add support for the hv gpci (get performance counter info) interface powerpc/perf: Add macros for defining event fields & formats powerpc/perf: Add a shared interface to get gpci version and capabilities powerpc/perf: Add 24x7 interface headers powerpc/perf: Add hv_gpci interface header powerpc: Add hvcalls for 24x7 and gpci (Get Performance Counter Info) sysfs: create bin_attributes under the requested group powerpc/perf: Enable BHRB access for EBB events powerpc/perf: Add BHRB constraint and IFM MMCRA handling for EBB ...
| * | fsl/pci: The new pci suspend/resume implementationWang Dongsheng2014-03-202-24/+154
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If we do nothing in suspend/resume, some platform PCIe ip-block can't guarantee the link back to L0 state from sleep, then, when we read the EP device will hang. Only we send pme turnoff message in pci controller suspend, and send pme exit message in resume, the link state will be normal. When we send pme turnoff message in pci controller suspend, the links will into l2/l3 ready, then, host cannot communicate with ep device, but pci-driver will call back EP device to save them state. So we need to change platform_driver->suspend/resume to syscore->suspend/resume. So the new suspend/resume implementation, send pme turnoff message in suspend, and send pme exit message in resume. And add a PME handler, to response PME & message interrupt. Change platform_driver->suspend/resume to syscore->suspend/resume. pci-driver will call back EP device, to save EP state in pci_pm_suspend_noirq, so we need to keep the link, until pci_pm_suspend_noirq finish. Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
| * | powerpc/pci: Fix IMMRBAR addressMinghuan Lian2014-03-191-0/+8
| |/ | | | | | | | | | | | | | | | | For PEXCSRBAR, bit 3-0 indicate prefetchable and address type. So when getting base address, these bits should be masked, otherwise we may get incorrect base address. Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* | Merge tag 'char-misc-3.15-rc1' of ↵Linus Torvalds2014-04-022-306/+0Star
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver patches from Greg KH: "Here's the big char/misc driver updates for 3.15-rc1. Lots of various things here, including the new mcb driver subsystem. All of these have been in linux-next for a while" * tag 'char-misc-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (118 commits) extcon: Move OF helper function to extcon core and change function name extcon: of: Remove unnecessary function call by using the name of device_node extcon: gpio: Use SIMPLE_DEV_PM_OPS macro extcon: palmas: Use SIMPLE_DEV_PM_OPS macro mei: don't use deprecated DEFINE_PCI_DEVICE_TABLE macro mei: amthif: fix checkpatch error mei: client.h fix checkpatch errors mei: use cl_dbg where appropriate mei: fix Unnecessary space after function pointer name mei: report consistently copy_from/to_user failures mei: drop pr_fmt macros mei: make me hw headers private to me hw. mei: fix memory leak of pending write cb objects mei: me: do not reset when less than expected data is received drivers: mcb: Fix build error discovered by 0-day bot cs5535-mfgpt: Simplify dependencies spmi: pm: drop bus-level PM suspend/resume routines spmi: pmic_arb: make selectable on ARCH_QCOM Drivers: hv: vmbus: Increase the limit on the number of pfns we can handle pch_phub: Report error writing MAC back to user ...
| * | driver/memory:Move Freescale IFC driver to a common driverPrabhakar Kushwaha2014-02-182-306/+0Star
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | Freescale IFC controller has been used for mpc8xxx. It will be used for ARM-based SoC as well. This patch moves the driver to driver/memory and fix the header file includes. Also remove module_platform_driver() and instead call platform_driver_register() from subsys_initcall() to make sure this module has been loaded before MTD partition parsing starts. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* / powerpc:eVh_pic: Kill irq_desc abuseThomas Gleixner2014-03-041-8/+2Star
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I'm really grumpy about this one. The line: #include "../../../kernel/irq/settings.h" should have been an alarm sign for all people who added their SOB to this trainwreck. When I cleaned up the mess people made with interrupt descriptors a few years ago, I warned that I'm going to hunt down new offenders and treat them with stinking trouts. In this case I'll use frozen shark for a better educational value. The whole idiocy which was done there could have been avoided with two lines of perfectly fine code. And do not complain about the lack of correct examples in tree. The solution is simple: Remove the brainfart and use the proper functions, which should have been used in the first place Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ashish Kalra <ashish.kalra@freescale.com> Cc: Timur Tabi <timur@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: ppc <linuxppc-dev@lists.ozlabs.org> Link: http://lkml.kernel.org/r/20140223212736.451970660@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* powerpc: Fix build failure in sysdev/mpic.c for MPIC_WEIRD=yPaul Gortmaker2014-02-111-19/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 446f6d06fab0b49c61887ecbe8286d6aaa796637 ("powerpc/mpic: Properly set default triggers") breaks the mpc7447_hpc_defconfig as follows: CC arch/powerpc/sysdev/mpic.o arch/powerpc/sysdev/mpic.c: In function 'mpic_set_irq_type': arch/powerpc/sysdev/mpic.c:886:9: error: case label does not reduce to an integer constant arch/powerpc/sysdev/mpic.c:890:9: error: case label does not reduce to an integer constant arch/powerpc/sysdev/mpic.c:894:9: error: case label does not reduce to an integer constant arch/powerpc/sysdev/mpic.c:898:9: error: case label does not reduce to an integer constant Looking at the cpp output (gcc 4.7.3), I see: case mpic->hw_set[MPIC_IDX_VECPRI_SENSE_EDGE] | mpic->hw_set[MPIC_IDX_VECPRI_POLARITY_POSITIVE]: The pointer into an array appears because CONFIG_MPIC_WEIRD=y is set for this platform, thus enabling the following: ------------------- #ifdef CONFIG_MPIC_WEIRD static u32 mpic_infos[][MPIC_IDX_END] = { [0] = { /* Original OpenPIC compatible MPIC */ [...] #define MPIC_INFO(name) mpic->hw_set[MPIC_IDX_##name] #else /* CONFIG_MPIC_WEIRD */ #define MPIC_INFO(name) MPIC_##name #endif /* CONFIG_MPIC_WEIRD */ ------------------- Here we convert the case section to if/else if, and also add the equivalent of a default case to warn about unknown types. Boot tested on sbc8548, build tested on all defconfigs. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* Merge branch 'next' of ↵Linus Torvalds2014-01-311-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull more powerpc bits from Ben Herrenschmidt: "Here are a few more powerpc bits for this merge window. The bulk is made of two pull requests from Scott and Anatolij that I had missed previously (they arrived while I was away). Since both their branches are in -next independently, and the content has been around for a little while, they can still go in. The rest is mostly bug and regression fixes, a small series of cleanups to our pseries cpuidle code (including moving it to the right place), and one new cpuidle bakend for the powernv platform. I also wired up the new sched_attr syscalls" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (37 commits) powerpc: Wire up sched_setattr and sched_getattr syscalls powerpc/hugetlb: Replace __get_cpu_var with get_cpu_var powerpc: Make sure "cache" directory is removed when offlining cpu powerpc/mm: Fix mmap errno when MAP_FIXED is set and mapping exceeds the allowed address space powerpc/powernv/cpuidle: Back-end cpuidle driver for powernv platform. powerpc/pseries/cpuidle: smt-snooze-delay cleanup. powerpc/pseries/cpuidle: Remove MAX_IDLE_STATE macro. powerpc/pseries/cpuidle: Make cpuidle-pseries backend driver a non-module. powerpc/pseries/cpuidle: Use cpuidle_register() for initialisation. powerpc/pseries/cpuidle: Move processor_idle.c to drivers/cpuidle. powerpc: Fix 32-bit frames for signals delivered when transactional powerpc/iommu: Fix initialisation of DART iommu table powerpc/numa: Fix decimal permissions powerpc/mm: Fix compile error of pgtable-ppc64.h powerpc: Fix hw breakpoints on !HAVE_HW_BREAKPOINT configurations clk: corenet: Adds the clock binding powerpc/booke64: Guard e6500 tlb handler with CONFIG_PPC_FSL_BOOK3E powerpc/512x: dts: add MPC5125 clock specs powerpc/512x: clk: support MPC5121/5123/5125 SoC variants powerpc/512x: clk: enforce even SDHC divider values ...
| * powerpc/iommu: Fix initialisation of DART iommu tableAlistair Popple2014-01-291-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit d084775738b746648d4102337163a04534a02982 switched the generic powerpc iommu backend code to use the it_page_shift field to determine page size. Commit 3a553170d35d69bea3877bffa508489dfa6f133d should have initiliased this field for all platforms, however the DART iommu table code was not updated. This commit initialises the it_page_shift field to 4K for the DART iommu. Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* | Merge branch 'for-3.14/core' of git://git.kernel.dk/linux-blockLinus Torvalds2014-01-301-10/+11
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull core block IO changes from Jens Axboe: "The major piece in here is the immutable bio_ve series from Kent, the rest is fairly minor. It was supposed to go in last round, but various issues pushed it to this release instead. The pull request contains: - Various smaller blk-mq fixes from different folks. Nothing major here, just minor fixes and cleanups. - Fix for a memory leak in the error path in the block ioctl code from Christian Engelmayer. - Header export fix from CaiZhiyong. - Finally the immutable biovec changes from Kent Overstreet. This enables some nice future work on making arbitrarily sized bios possible, and splitting more efficient. Related fixes to immutable bio_vecs: - dm-cache immutable fixup from Mike Snitzer. - btrfs immutable fixup from Muthu Kumar. - bio-integrity fix from Nic Bellinger, which is also going to stable" * 'for-3.14/core' of git://git.kernel.dk/linux-block: (44 commits) xtensa: fixup simdisk driver to work with immutable bio_vecs block/blk-mq-cpu.c: use hotcpu_notifier() blk-mq: for_each_* macro correctness block: Fix memory leak in rw_copy_check_uvector() handling bio-integrity: Fix bio_integrity_verify segment start bug block: remove unrelated header files and export symbol blk-mq: uses page->list incorrectly blk-mq: use __smp_call_function_single directly btrfs: fix missing increment of bi_remaining Revert "block: Warn and free bio if bi_end_io is not set" block: Warn and free bio if bi_end_io is not set blk-mq: fix initializing request's start time block: blk-mq: don't export blk_mq_free_queue() block: blk-mq: make blk_sync_queue support mq block: blk-mq: support draining mq queue dm cache: increment bi_remaining when bi_end_io is restored block: fixup for generic bio chaining block: Really silence spurious compiler warnings block: Silence spurious compiler warnings block: Kill bio_pair_split() ...
| * Merge tag 'v3.13-rc6' into for-3.14/coreJens Axboe2013-12-311-1/+1
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Needed to bring blk-mq uptodate, since changes have been going in since for-3.14/core was established. Fixup merge issues related to the immutable biovec changes. Signed-off-by: Jens Axboe <axboe@kernel.dk> Conflicts: block/blk-flush.c fs/btrfs/check-integrity.c fs/btrfs/extent_io.c fs/btrfs/scrub.c fs/logfs/dev_bdev.c
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-11 03:08:40 +0200