summaryrefslogtreecommitdiffstats
path: root/arch
Commit message (Collapse)AuthorAgeFilesLines
* [ARM] pxa: workaround errata #37 by not using half turbo switchingDennis O'Brien2009-10-121-1/+1
| | | | | | | | | PXA27x Errata #37 implies system will hang when switching into or out of half turbo (HT bit in CLKCFG) mode, workaround this by not using it. Signed-off-by: Dennis O'Brien <dennis.obrien@eqware.net> Cc: stable-2.6.31 <stable@kernel.org> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
* [ARM] pxa/csb726: adjust duplicate structure field initializationJulia Lawall2009-10-121-1/+1
| | | | | | | | | | Currently the irq_type field of the csb726_lan_config structure is initialized twice. The value in the first case, SMSC911X_IRQ_POLARITY_ACTIVE_LOW, is normally stored in the irq_polarity field, so I have renamed the field in the first initialization to that. Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
* pci: increase alignment to make more space for hidden codeYinghai Lu2009-10-111-2/+2
| | | | | | | | | | | | | | | | As reported in http://bugzilla.kernel.org/show_bug.cgi?id=13940 on some system when acpi are enabled, acpi clears some BAR for some devices without reason, and kernel will need to allocate devices for them. It then apparently hits some undocumented resource conflict, resulting in non-working devices. Try to increase alignment to get more safe range for unassigned devices. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds2009-10-1117-51/+221
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (21 commits) [S390] dasd: fix race condition in resume code [S390] Add EX_TABLE for addressing exception in usercopy functions. [S390] 64-bit register support for 31-bit processes [S390] hibernate: Use correct place for CPU address in lowcore [S390] pm: ignore time spend in suspended state [S390] zcrypt: Improve some comments [S390] zcrypt: Fix sparse warning. [S390] perf_counter: fix vdso detection [S390] ftrace: drop nmi protection [S390] compat: fix truncate system call wrapper [S390] Provide arch specific mdelay implementation. [S390] Fix enabled udelay for short delays. [S390] cio: allow setting boxed devices offline [S390] cio: make not operational handling consistent [S390] cio: make disconnected handling consistent [S390] Fix memory leak in /proc/cio_ignore [S390] cio: channel path memory leak [S390] module: fix memory leak in s390 module loader [S390] Enable kmemleak on s390. [S390] 3270 console build fix ...
| * [S390] Add EX_TABLE for addressing exception in usercopy functions.Gerald Schaefer2009-10-062-12/+14
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds an EX_TABLE entry to mvc{p|s|os} usercopy functions that may be called with KERNEL_DS. In combination with collaborative memory management, kernel pages marked as unused may trigger an adressing exception in the usercopy functions. This fixes an unhandled addressing exception bug where strncpy_from_user() is used with len > strnlen and KERNEL_DS, crossing a page boundary to an unused page. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * [S390] 64-bit register support for 31-bit processesHeiko Carstens2009-10-066-4/+147
| | | | | | | | | | | | | | | | From: Heiko Carstens <heiko.carstens@de.ibm.com> From: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * [S390] hibernate: Use correct place for CPU address in lowcoreMichael Holzheu2009-10-061-3/+2Star
| | | | | | | | | | | | | | | | | | We used address 0x1084 instead of 0x84 to store the suspend CPU address. With this patch we use the correct address 0x84 as it is defined in the POP. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * [S390] pm: ignore time spend in suspended stateMartin Schwidefsky2009-10-061-4/+17
| | | | | | | | | | | | | | | | The time a system has been suspended should not show up in any of the cputime accounting fields. The time of inactivity is definitly not any form of real cputime nor is it idle time. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * [S390] perf_counter: fix vdso detectionHeiko Carstens2009-10-061-8/+8
| | | | | | | | | | | | | | s390 version of f2053f1a "powerpc/perf_counter: Fix vdso detection". Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * [S390] ftrace: drop nmi protectionHeiko Carstens2009-10-061-3/+0Star
| | | | | | | | | | | | | | | | | | | | | | The function graph tracer used to have a protection against NMI while entering a function entry tracing. But this is useless now, the tracer is reentrant and the ring buffer supports NMI tracing. Same as 07868b086cca784f4b532fc2ab574ec3a73b468a for x86. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * [S390] compat: fix truncate system call wrapperHeiko Carstens2009-10-061-1/+1
| | | | | | | | | | | | | | | | The system call takes a signed length parameter. So perform sign extension instead of zero extension. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * [S390] Provide arch specific mdelay implementation.Heiko Carstens2009-10-062-10/+11
| | | | | | | | | | | | | | Use an own implementation instead of the common code udelay loop. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * [S390] Fix enabled udelay for short delays.Christian Borntraeger2009-10-061-4/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When udelay() gets called with a delay that would expire before the next clock event it reprograms the clock comparator. When the interrupt happens the clock comparator won't be resetted therefore the interrupt condition doesn't get cleared. The result is an endless timer interrupt loop until the next clock event would expire (stored in lowcore). So udelay() usually would wait much longer for small delays than it should. Fix this by disabling the local tick which makes sure that the clock comparator will be resetted when a timer interrupt happens. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * [S390] module: fix memory leak in s390 module loaderChristian Borntraeger2009-10-061-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The s390 version of module_frob_arch_sections allocates additional syminfos for got and plt offsets. These syminfos are freed on sucessful module load. If the module fails to load (e.g. missing dependency when using insmod instead of modprobe) this area is not freed. This patch lets module_free free this area. Please note, we have to set the pointer to NULL since module_free is called several times from the generic code. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * [S390] Enable kmemleak on s390.Heiko Carstens2009-10-061-0/+1
| | | | | | | | | | | | | | | | Also increase the maximum possible kmemleak early log entries since 2000 are not sufficient on s390. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * [S390] fix build breakage with CONFIG_AIO=nMartin Schwidefsky2009-10-061-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | next-20090925 randconfig build breaks on s390x, with CONFIG_AIO=n. arch/s390/mm/pgtable.c: In function 's390_enable_sie': arch/s390/mm/pgtable.c:282: error: 'struct mm_struct' has no member named 'ioctx_list' arch/s390/mm/pgtable.c:298: error: 'struct mm_struct' has no member named 'ioctx_list' make[1]: *** [arch/s390/mm/pgtable.o] Error 1 Reported-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | headers: remove sched.h from interrupt.hAlexey Dobriyan2009-10-1112-0/+12
| | | | | | | | | | | | | | | | After m68k's task_thread_info() doesn't refer to current, it's possible to remove sched.h from interrupt.h and not break m68k! Many thanks to Heiko Carstens for allowing this. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
* | Merge branch 'for-linus' of ↵Linus Torvalds2009-10-091-39/+39
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - print debug data when testing AUX IRQ delivery Input: libps2 - fix dependancy on i8042 Input: fix rx51 board keymap Input: ad7879 - pass up error codes from probe functions Input: xpad - add BigBen Interactive XBOX 360 Controller Input: rotary_encoder - fix relative axis support Input: sparkspkr - move remove() functions to .devexit.text Input: wistron_btns - add DMI entry for Medion WIM2030 laptop
| * | Input: fix rx51 board keymapAmit Kucheria2009-10-061-39/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The original driver was written with the KEY() macro defined as (col, row) instead of (row, col) as defined by the matrix keypad infrastructure. So the keymap was defined accordingly. Since the driver that was merged upstream uses the matrix keypad infrastructure, modify the keymap accordingly. While we are at it, fix the comments in twl4030.h and define PERSISTENT_KEY as (r,c) instead of (c, r) Tested on a RX51 (N900) device. Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
* | | Merge branch 'for-linus' of ↵Linus Torvalds2009-10-09250-4717/+1078Star
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: Blackfin: convert to GENERIC_HARDIRQS_NO__DO_IRQ Blackfin: drop all simple-gpio board resources Blackfin: fix framebuffer mmap bug for nommu Blackfin: includecheck fix: mach-bf548, ezkit.c Blackfin: drop cs_change_per_word setting Blackfin: bf533-ezkit: convert to physmap/jedec_probe Blackfin: convert adv7393 resources to new i2c framework Blackfin: fix missed cache config renames Blackfin: cplbinfo: drop d_path() hacks Blackfin: asm/irq.h: pull in mach/anomaly.h for anomaly defines Blackfin: BF51x: add PTP MMR defines Blackfin: mass clean up of copyright/licensing info Blackfin: convert to use arch_gettimeoffset()
| * | | Blackfin: convert to GENERIC_HARDIRQS_NO__DO_IRQMichael Hennerich2009-10-081-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Blackfin already sets proper flow handlers on all IRQs, and we don't rely on __do_IRQ, therefore we can simply select GENERIC_HARDIRQS_NO__DO_IRQ. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * | | Blackfin: drop all simple-gpio board resourcesMike Frysinger2009-10-0817-255/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The simple-gpio has been replaced by the gpio sysfs interface, so drop the unused simple-gpio resources from all Blackfin boards. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * | | Blackfin: fix framebuffer mmap bug for nommuThomas Chou2009-10-082-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch added a special get_unmapped_area for framebuffer which was hooked to the file ops in drivers/video/fbmem.c. This is needed since v2.6.29-rc1 where nommu vma management was updated, and mmap of framebuffer caused kernel BUG panic. You may turn on "Debug the global anon/private NOMMU mapping region tree" config to such message. As Documentation/nommu-mmap.txt said, "To provide shareable character device support, a driver must provide a file->f_op->get_unmapped_area() operation. The mmap() routines will call this to get a proposed address for the mapping." With this change, user space should call mmap for framebuffer using shared map. Or it can try shared map first, then private map if failed. This shared map usage is now consistent between mmu and nommu. The sys_ file may not be a good place for this patch. But there is a similar one for sparc. I tested a similar patch on nios2nommu, though I don't have a blackfin board to test. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * | | Blackfin: includecheck fix: mach-bf548, ezkit.cJaswinder Singh Rajput2009-10-081-1/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the following 'make includecheck' warning: arch/blackfin/mach-bf548/boards/ezkit.c: linux/input.h is included more than once. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * | | Blackfin: drop cs_change_per_word settingMike Frysinger2009-10-085-8/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Structs get initialized to 0 already, and we want to punt this field, so scrub it from all of our boards. Reported-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * | | Blackfin: bf533-ezkit: convert to physmap/jedec_probeMike Frysinger2009-10-081-25/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that the common jedec_probe supports the ST PSD4256G6V, no need to use the custom stm_flash driver. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * | | Blackfin: convert adv7393 resources to new i2c frameworkMichael Hennerich2009-10-085-50/+31Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that the driver has been updated, convert the board resources to the new i2c framework for managing slaves. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * | | Blackfin: fix missed cache config renamesGraf Yang2009-10-071-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Looks like the big Kconfig cache split/rename missed one spot in the SMP cache lock headers. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * | | Blackfin: cplbinfo: drop d_path() hacksMike Frysinger2009-10-071-13/+12Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The cplbinfo was using d_path() to figure out which cpu/cplb was being parsed. As Al pointed out, this isn't exactly reliable as it assumes the static VFS path to be unchanged, and it's just poor form. So use the proc_create_data() to properly (and internally) pass the exact cpu/cplb requested to the parser function. Reported-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * | | Blackfin: asm/irq.h: pull in mach/anomaly.h for anomaly definesMike Frysinger2009-10-071-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The asm/irq.h header uses anomaly defines, but doesn't make sure to explicitly include the anomaly header for them. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * | | Blackfin: BF51x: add PTP MMR definesBarry Song2009-10-072-0/+69
| | | |
| * | | Blackfin: mass clean up of copyright/licensing infoRobin Getz2009-10-07248-4298/+893Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bill Gatliff & David Brownell pointed out we were missing some copyrights, and licensing terms in some of the files in ./arch/blackfin, so this fixes things, and cleans them up. It also removes: - verbose GPL text(refer to the top level ./COPYING file) - file names (you are looking at the file) - bug url (it's in the ./MAINTAINERS file) - "or later" on GPL-2, when we did not have that right It also allows some Blackfin-specific assembly files to be under a BSD like license (for people to use them outside of Linux). Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * | | Blackfin: convert to use arch_gettimeoffset()john stultz2009-10-072-65/+8Star
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert Blackfin to use GENERIC_TIME via the arch_getoffset() infrastructure, reducing the amount of arch specific code we need to maintain. I've taken my best swing at converting this, but I'm not 100% confident I got it right. My cross-compiler is now out of date (gcc4.2) so I wasn't able to check if it compiled. Any assistance from arch maintainers or testers to get this merged would be great. Signed-off-by: John Stultz <johnstul@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | | Merge branch 'sh/for-2.6.32' of ↵Linus Torvalds2009-10-0912-19/+106
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'sh/for-2.6.32' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Don't allocate smaller sized mappings on every iteration sh: Try PMB mapping based on physical address, not mapping size sh: Plug PMB alloc memory leak sh: Sprinkle __uses_jump_to_uncached sh: enable sleep state LEDs on Ecovec24 usb: r8a66597-udc unaligned fifo fix sh: mach-ecovec24: Document DS2 switch settings. sh: Build fix: export __movmem sh: Disable unaligned kernel access printks by default. sh: mach-ecovec24: modify 1st MTD area to read only sh: mach-ecovec24: Add TouchScreen support sh: magicpanelr2 and dreamcast can use the generic I/O base. sh: Don't enable interrupts in the page fault path sh: Set the default I/O port base to P2SEG. sh: Handle ioport_map() cases for >= P1SEG addresses.
| * | | sh: Don't allocate smaller sized mappings on every iterationMatt Fleming2009-10-091-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, we've got the less than ideal situation where if we need to allocate a 256MB mapping we'll allocate four entries like so, entry 1: 128MB entry 2: 64MB entry 3: 16MB entry 4: 16MB This is because as we execute the loop in pmb_remap() we will progressively try mapping the remaining address space with smaller and smaller sizes. This isn't good because the size we use on one iteration may be the perfect size to use on the next iteration, for instance when the initial size is divisible by one of the PMB mapping sizes. With this patch, we now only need two entries in the PMB to map 256MB of address space, entry 1: 128MB entry 2: 128MB Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * | | sh: Try PMB mapping based on physical address, not mapping sizeMatt Fleming2009-10-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We should favour PMB mappings when the physical address cannot be reached with 29-bits. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * | | sh: Plug PMB alloc memory leakMatt Fleming2009-10-091-6/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If we fail to allocate a PMB entry in pmb_remap() we must remember to clear and free any PMB entries that we may have previously allocated, e.g. if we were allocating a multiple entry mapping. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * | | sh: Sprinkle __uses_jump_to_uncachedMatt Fleming2009-10-092-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix some callers of jump_to_uncached() and back_to_cached() that were not annotated with __uses_jump_to_uncached. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * | | sh: enable sleep state LEDs on Ecovec24Magnus Damm2009-10-091-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Extend the ecovec24 board code to enable Power Management LEDs showing the current sh7724 sleep state. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * | | sh: mach-ecovec24: Document DS2 switch settings.Kuninori Morimoto2009-10-051-0/+14
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * | | sh: Build fix: export __movmemLubomir Rintel2009-09-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ERROR: "__movmem" [net/irda/irda.ko] undefined! ERROR: "__movmem" [fs/nfsd/nfsd.ko] undefined! ERROR: "__movmem" [fs/lockd/lockd.ko] undefined! ERROR: "__movmem" [crypto/sha1_generic.ko] undefined! Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * | | sh: Disable unaligned kernel access printks by default.Paul Mundt2009-09-301-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Certain networking and USB workloads generate floods of these accesses, so just disable it by default (thereby restoring the old behaviour). The option remains configurable from userspace, and can still be used as a debugging aid. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * | | sh: mach-ecovec24: modify 1st MTD area to read onlyKuninori Morimoto2009-09-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Tested-by: Yusuke Goda <goda.yusuke@renesas.com> Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * | | sh: mach-ecovec24: Add TouchScreen supportKuninori Morimoto2009-09-301-0/+42
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * | | sh: magicpanelr2 and dreamcast can use the generic I/O base.Paul Mundt2009-09-282-4/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is now no need for the magicpanelr2 and dreamcast platforms to set their own I/O port bas values, given that the generic machvec code now sets this to P2SEG for everyone. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * | | sh: Don't enable interrupts in the page fault pathMatt Fleming2009-09-281-2/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There's already code in do_page_fault() to conditionally enable interrupts, so we don't need to unconditonally enable them before calling it. This fixes a lockdep warning where we called trace_hardirqs_off() but with irqs still enabled. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * | | sh: Set the default I/O port base to P2SEG.Paul Mundt2009-09-281-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This bumps up the default I/O base to P2SEG, which allows legacy probing to bail out gracefully rather than oopsing. Platforms that have a real PIO offset still need to fix this up on their own, although most platforms are content with P2SEG already. The previous change to teach ioport_map() about >= P1SEG offsets in combination with this patch allows both the already remapped and the legacy address probing to pass through and succeed. Fixes up an oops with i8042 on the sh7785lcr board. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * | | sh: Handle ioport_map() cases for >= P1SEG addresses.Paul Mundt2009-09-281-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes up the case where certain drivers already do their own remapping and subsequently attempt to use the PIO calls for I/O. In this case there is no additional remapping that needs to be done, and the address can be casted in to the cookie directly. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* | | | Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds2009-10-084-28/+51
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, pci: Correct spelling in a comment x86: Simplify bound checks in the MTRR code x86: EDAC: carve out AMD MCE decoding logic initcalls: Add early_initcall() for modules x86: EDAC: MCE: Fix MCE decoding callback logic
| * | | | x86, pci: Correct spelling in a commentMarin Mitov2009-10-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Cc: Joerg Roedel <joerg.roedel@amd.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> LKML-Reference: <200910032045.02523.mitov@issp.bas.bg> Signed-off-by: Ingo Molnar <mingo@elte.hu> ======================================================
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-17 04:01:04 +0200