summaryrefslogtreecommitdiffstats
path: root/drivers/ata/libata-core.c
Commit message (Collapse)AuthorAgeFilesLines
* Merge branch 'for-4.10' of ↵Linus Torvalds2016-12-141-3/+10
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull another libata patch from Tejun Heo: "One more patch from Adam added. It makes libata skip probing for NCQ prio unless the feature is explicitly requested by the user. This is necessary because some controllers lock up after the optional feature is probed" * 'for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ata: avoid probing NCQ Prio Support if not explicitly requested
| * ata: avoid probing NCQ Prio Support if not explicitly requestedAdam Manzanares2016-12-131-3/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously, when the ata device was being initialized we were probing for NCQ prio support by checking the identify information and also checking the log page that holds information about ncq prio support. This caused an error on an Intel HBA so the code is now updated to only probe for NCQ prio support when the sysfs variable controlling NCQ prio support is enabled. tj: Update formatting, switch to spin_[un]lock_irq() and update locking a bit, use REVALIDATE instead of RESET, and return -EIO instead of -EINVAL on config failure. Signed-off-by: Adam Manzanares <adam.manzanares@wdc.com> Signed-off-by: Tejun Heo <tj@kernel.org>
* | Merge branch 'for-4.10' of ↵Linus Torvalds2016-12-131-1/+34
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata updates from Tejun Heo: - Adam added opt-in ATA command priority support. - There are machines which hide multiple nvme devices behind an ahci BAR. Dan Williams proposed a solution to force-switch the mode but deemed too hackishd. People are gonna discuss the proper way to handle the situation in nvme standard meetings. For now, detect and warn about the situation. - Low level driver specific changes. Christoph Hellwig pipes in about the hidden nvme warning: "I wish that was the case. We've pretty much agreed that we'll want to implement it as a virtual PCIe root bridge, similar to Intels other 'innovation' VMD that we work around that way. But Intel management has apparently decided that they don't want to spend more cycles on this now that Lenovo has an optional BIOS that doesn't force this broken mode anymore, and no one outside of Intel has enough information to implement something like this. So for now I guess this warning is it, until Intel reconsideres and spends resources on fixing up the damage their Chipset people caused" * 'for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ahci: warn about remapped NVMe devices ahci-remap.h: add ahci remapping definitions nvme: move NVMe class code to pci_ids.h pata: imx: support controller modes up to PIO4 pata: imx: add support of setting timings for PIO modes pata: imx: set controller PIO mode with .set_piomode callback pata: imx: sort headers out ata: set ncq_prio_enabled iff device has support ata: ATA Command Priority Disabled By Default ata: Enabling ATA Command Priorities block: Add iocontext priority to request ahci: qoriq: added ls1046a platform support
| * ata: set ncq_prio_enabled iff device has supportAdam Manzanares2016-10-201-2/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We previously had a check to see if the device has support for prioritized ncq commands and a check to see if a device flag is set, through a sysfs variable, in order to send a prioritized command. This patch only allows the sysfs variable to be set if the device supports prioritized commands enabling one check in ata_build_rw_tf in order to determine whether or not to send a prioritized command. This patch depends on ata: ATA Command Priority Disabled By Default tj: Minor subject and formatting updates. Signed-off-by: Adam Manzanares <adam.manzanares@wdc.com> Signed-off-by: Tejun Heo <tj@kernel.org>
| * ata: ATA Command Priority Disabled By DefaultAdam Manzanares2016-10-191-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Add a sysfs entry to turn on priority information being passed to a ATA device. By default this feature is turned off. This patch depends on ata: Enabling ATA Command Priorities tj: Renamed ncq_prio_on to ncq_prio_enable and removed trivial ata_ncq_prio_on() and open-coded the test. Signed-off-by: Adam Manzanares <adam.manzanares@hgst.com> Signed-off-by: Tejun Heo <tj@kernel.org>
| * ata: Enabling ATA Command PrioritiesAdam Manzanares2016-10-191-1/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch checks to see if an ATA device supports NCQ command priorities. If so and the user has specified an iocontext that indicates IO_PRIO_CLASS_RT then we build a tf with a high priority command. This is done to improve the tail latency of commands that are high priority by passing priority to the device. tj: Removed trivial ata_ncq_prio_enabled() and open-coded the test. Signed-off-by: Adam Manzanares <adam.manzanares@hgst.com> Signed-off-by: Tejun Heo <tj@kernel.org>
* | docs: fix locations of several documents that got movedMauro Carvalho Chehab2016-10-241-1/+1
|/ | | | | | | | The previous patch renamed several files that are cross-referenced along the Kernel documentation. Adjust the links to point to the right places. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* Merge tag 'leds_for_4.8' of ↵Linus Torvalds2016-07-271-0/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED updates from Jacek Anaszewski: "New LED class driver: - LED driver for TI LP3952 6-Channel Color LED LED core improvements: - Only descend into leds directory when CONFIG_NEW_LEDS is set - Add no-op gpio_led_register_device when LED subsystem is disabled - MAINTAINERS: Add file patterns for led device tree bindings LED Trigger core improvements: - return error if invalid trigger name is provided via sysfs LED class drivers improvements - is31fl32xx: define complete i2c_device_id table - is31fl32xx: fix typo in id and match table names - leds-gpio: Set of_node for created LED devices - pca9532: Add device tree support Conversion of IDE trigger to common disk trigger: - leds: convert IDE trigger to common disk trigger - leds: documentation: 'ide-disk' to 'disk-activity' - unicore32: use the new LED disk activity trigger - parisc: use the new LED disk activity trigger - mips: use the new LED disk activity trigger - arm: use the new LED disk activity trigger - powerpc: use the new LED disk activity trigger" * tag 'leds_for_4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: leds: is31fl32xx: define complete i2c_device_id table leds: is31fl32xx: fix typo in id and match table names leds: LED driver for TI LP3952 6-Channel Color LED leds: leds-gpio: Set of_node for created LED devices leds: triggers: return error if invalid trigger name is provided via sysfs leds: Only descend into leds directory when CONFIG_NEW_LEDS is set leds: Add no-op gpio_led_register_device when LED subsystem is disabled unicore32: use the new LED disk activity trigger parisc: use the new LED disk activity trigger mips: use the new LED disk activity trigger arm: use the new LED disk activity trigger powerpc: use the new LED disk activity trigger leds: documentation: 'ide-disk' to 'disk-activity' leds: convert IDE trigger to common disk trigger leds: pca9532: Add device tree support MAINTAINERS: Add file patterns for led device tree bindings
| * leds: convert IDE trigger to common disk triggerStephan Linz2016-06-201-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch converts the IDE specific LED trigger to a generic disk activity LED trigger. The libata core is now a trigger source just like before the IDE disk driver. It's merely a replacement of the string ide by disk. The patch is taken from http://dev.gentoo.org/~josejx/ata.patch and is widely used by any ibook/powerbook owners with great satisfaction. Likewise, it is very often used successfully on different ARM platforms. Unlike the original patch, the existing 'ide-disk' trigger is still available for backward compatibility. That reduce the amount of patches in affected device trees out of the mainline kernel. For further development, the new name 'disk-activity' should be used. Cc: Joseph Jezak <josejx@gentoo.org> Cc: Jörg Sommer <joerg@alea.gnuu.de> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Stephan Linz <linz@li-pro.net> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
* | Merge branch 'for-4.8' of ↵Linus Torvalds2016-07-261-6/+8
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata updates from Tejun Heo: "libata saw quite a bit of activities in this cycle: - SMR drive support still being worked on - bug fixes and improvements to misc SCSI command emulation - some low level driver updates" * 'for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (39 commits) libata-scsi: better style in ata_msense_*() AHCI: Clear GHC.IS to prevent unexpectly asserting INTx ata: sata_dwc_460ex: remove redundant dev_err call ata: define ATA_PROT_* in terms of ATA_PROT_FLAG_* libata: remove ATA_PROT_FLAG_DATA libata: remove ata_is_nodata ata: make lba_{28,48}_ok() use ATA_MAX_SECTORS{,_LBA48} libata-scsi: minor cleanup for ata_scsi_zbc_out_xlat libata-scsi: Fix ZBC management out command translation libata-scsi: Fix translation of REPORT ZONES command ata: Handle ATA NCQ NO-DATA commands correctly libata-eh: decode all taskfile protocols ata: fixup ATA_PROT_NODATA libsas: use ata_is_ncq() and ata_has_dma() accessors libata: use ata_is_ncq() accessors libata: return boolean values from ata_is_* libata-scsi: avoid repeated calculation of number of TRIM ranges libata-scsi: reject WRITE SAME (16) with n_block that exceeds limit libata-scsi: rename ata_msense_ctl_mode() to ata_msense_control() libata-scsi: fix D_SENSE bit relection in control mode page ...
| * | libata: remove ata_is_nodataChristoph Hellwig2016-07-191-1/+1
| | | | | | | | | | | | | | | | | | | | | The only caller can just check for !ata_is_data instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tejun Heo <tj@kernel.org>
| * | ata: fixup ATA_PROT_NODATAHannes Reinecke2016-07-141-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The taskfile protocol is a numeric value, and can not be ORed. Currently this is harmless as the protocol is always zeroed before, but if it ever has a non-zero value the ORing would create incorrect results. Signed-off-by: Hannes Reinecke <hare@suse.de> [hch: updated patch description] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tejun Heo <tj@kernel.org>
| * | libata: use ata_is_ncq() accessorsHannes Reinecke2016-07-141-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | Use accessor functions instead of the raw value. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tejun Heo <tj@kernel.org>
| * | libata-scsi: fix SET FEATURES "filtering" for ata_msense_caching()Tom Yan2016-07-121-1/+3
| |/ | | | | | | | | | | | | | | | | | | Without this fix, the DRA bit of the caching mode page would not be updated when the read look-ahead feature is toggled (e.g. with `smartctl --set`), but will only be until, for example, the write cache feature is touched. Signed-off-by: Tom Yan <tom.ty89@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
* / libata: LITE-ON CX1-JB256-HP needs lower max_sectorsTejun Heo2016-07-191-0/+6
|/ | | | | | | | | | | | | | Since 34b48db66e08 ("block: remove artifical max_hw_sectors cap"), max_sectors is no longer limited to BLK_DEF_MAX_SECTORS and LITE-ON CX1-JB256-HP keeps timing out with higher max_sectors. Revert it to the previous value. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: dgerasimov@gmail.com Link: https://bugzilla.kernel.org/show_bug.cgi?id=121671 Cc: stable@vger.kernel.org # v3.19+ Fixes: 34b48db66e08 ("block: remove artifical max_hw_sectors cap") Signed-off-by: Tejun Heo <tj@kernel.org>
* Merge branch 'for-4.7-zac' of ↵Linus Torvalds2016-05-241-21/+194
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata ZAC support from Tejun Heo: "This contains Zone ATA Command support for Shingled Magnetic Recording devices. In addition to sending the new commands down to the device, as ZAC commands depend on getting a lot of responses from the device, piping up responses is beefed up too. However, it doesn't involve changes to libata core mechanism or its interaction with upper layers, so I'm not expecting too many fallouts. Kudos to Hannes for driving SMR support" * 'for-4.7-zac' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (28 commits) libata: support host-aware and host-managed ZAC devices libata: support device-managed ZAC devices libata: NCQ encapsulation for ZAC MANAGEMENT OUT libata: Implement ZBC OUT translation libata: implement ZBC IN translation libata: fixup ZAC device disabling libata-scsi: Generate sense code for disabled devices libata-trace: decode subcommands libata: Check log page directory before accessing pages libata: Add command definitions for NCQ Encapsulation for READ LOG DMA EXT libata: Separate out ata_dev_config_ncq_send_recv() libata/libsas: Define ATA_CMD_NCQ_NON_DATA libsas: enable FPDMA SEND/RECEIVE libata: do not attempt to retrieve sense code twice libata-scsi: Set information sense field for invalid parameter libata-scsi: set bit pointer for sense code information libata-scsi: Set field pointer in sense code scsi: add scsi_set_sense_field_pointer() libata: Implement control mode page to select sense format libata-scsi: generate correct ATA pass-through sense ...
| * libata: support host-aware and host-managed ZAC devicesHannes Reinecke2016-05-091-0/+94
| | | | | | | | | | | | | | | | | | | | | | | | Byte 69 bits 0:1 in the IDENTIFY DEVICE data indicate a host-aware ZAC device. Host-managed ZAC devices have their own individual signature, and to not set the bits in the IDENTIFY DEVICE data. And whenever we detect a ZAC-compatible device we should be displaying the zoned block characteristics VPD page. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Tejun Heo <tj@kernel.org>
| * libata: NCQ encapsulation for ZAC MANAGEMENT OUTHannes Reinecke2016-05-091-3/+40
| | | | | | | | | | | | | | | | | | Add NCQ encapsulation for ZAC MANAGEMENT OUT and evaluate NCQ Non-Data log pages to figure out if NCQ encapsulation is supported. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org>
| * libata: Check log page directory before accessing pagesHannes Reinecke2016-05-091-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | When reading the NCQ Send/Recv log it might actually not supported, thereby causing irritating messages 'READ LOG DMA EXT failed'. Instead we should be reading the log directory first to figure out if the log is actually supported before trying to access it. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org>
| * libata: Separate out ata_dev_config_ncq_send_recv()Hannes Reinecke2016-05-091-20/+27
| | | | | | | | | | | | | | Move NCQ SEND/RECEIVE checks into a separate function. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org>
| * libata: sanitize ata_tf_read_block()Hannes Reinecke2016-04-041-2/+2
| | | | | | | | | | | | | | | | | | | | | | Return U64_MAX if ata_tf_read_block() could not decode the LBA address, and do not set the information sense descriptor in ata_gen_ata_sense() in these cases. tj: s/(u64)-1/U64_MAX/ Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org>
| * libata: Implement support for sense data reportingHannes Reinecke2016-04-041-1/+19
| | | | | | | | | | | | | | | | | | | | ACS-4 defines a sense data reporting feature set. This patch implements support for it. tj: Cosmetic formatting updates. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Tejun Heo <tj@kernel.org>
* | treewide: Fix typos in libata.xmlMasanari Iida2016-04-131-8/+8
| | | | | | | | | | | | | | | | | | | | This patch fix spelling typos found in Documentation/Docbook/libata.xml. It is because the file was generated from comments in source, I had to fix comments in libata-core.c Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Tejun Heo <tj@kernel.org>
* | libata-core: Allow longer timeout for drive spinup from PUISDamien Le Moal2016-04-041-1/+5
|/ | | | | | | | | | | | | | | | When spinning up a drive from powered on standby mode (PUIS), SETFEATURES_SPINUP is executed with the default timeout used for any SETFEATURES subcommand, that is 5+10 seconds. The total 15s is too short for some drives to complete spinup (e.g. drives with a large indirection table stored on media), resulting in ata_dev_read_id to fail twice on the execution of SETFEATURES_SPINUP. For this feature, allow a larger default timeout of 30 seconds. However, in the same spirit as with the timeout of other feature subcommands, do not ignore ata_probe_timeout if it is set). Signed-off-by: Damien Le Moal <damien.lemoal@hgst.com> Signed-off-by: Tejun Heo <tj@kernel.org>
* libata: blacklist a Viking flash model for MWDMA corruptionShikha Jain2016-01-251-0/+1
| | | | | | | | | Viking flash model VRFDFC22048UCHC-TE causes data corruption in MWDMA mode. Cc: xe-kernel@external.cisco.com Signed-off-by: Shikha Jain <shikjain@cisco.com> Signed-off-by: Anil Veliyankara Madam <aveliyan@cisco.com> Signed-off-by: Tejun Heo <tj@kernel.org>
* libata: skip debounce delay on link resumeDanesh Petigara2016-01-081-1/+2
| | | | | | | | | | | | | | The link resume logic uses a 200msec delay while debouncing the SControl register. The rationale behind that delay is to accommodate some PHYs that behave badly if their SStatus/ SControl registers are pounded immediately on resume. The Broadcom STB SATA PHY does not seem to have this issue. This patch introduces a new link flag that allows platforms to skip the debounce delay if it isn't needed. Signed-off-by: Danesh Petigara <dpetigara@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
* drivers: libata-core: Use usleep_range() instead of msleep() for short ↵Anil Veliyankara Madam2016-01-081-1/+7
| | | | | | | | | | | | | | | | | | | | | sleeps (<20 ms) Since msleep() may sleep longer than intended time for values less than 20ms, this patch allows the use of usleep_range for waits less that 20ms. usleep_range is a finer precision implementation of msleep and is designed to be a drop-in replacement for udelay where a precise sleep/busy-wait is unnecessary. More details can be found at http://lkml.org/lkml/2007/8/3/250 and in Documentation/timers/timers-howto.txt. This change has been done to improve the performace in PIO6 mode which is used by viking flash. Cc: xe-kernel@external.cisco.com Signed-off-by: Anil Veliyankara Madam <aveliyan@cisco.com> Signed-off-by: Shikha Jain <shikjain@cisco.com> Signed-off-by: Tejun Heo <tj@kernel.org>
* ata: core: fix irq description on AHCI single irq systemsHeiner Kallweit2015-12-071-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On my machine with single irq AHCI just the PCI id is printed as description in /proc/interrupts. I found a related discussion from beginning of this year: http://www.gossamer-threads.com/lists/linux/kernel/2117335 Seems like 4f37b504768c ("libata: Use dev_name() for request_irq() to distinguish devices") tried to fix displaying a proper interrupt description for one scenario but broke it for another one. The mentioned discussion ended in the current situation being considered as broken but w/o a patch to fix it. The following patch is based on a proposal in this mail thread. Now the interrupt is properly described as: PCI-MSI 512000-edge ahci[0000:00:1f.2] By combining both values also the scenario that commit 4f37b504768c ("libata: Use dev_name() for request_irq() to distinguish devices") refers to should still be fine. There it should look like this now: ahci[20100000.ide] Using managed memory allocation ensures that the irq description lives at least as long as the interrupt. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
* Merge branch 'for-4.3' of ↵Linus Torvalds2015-09-021-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata updates from Tejun Heo: "Nothing interesting. A couple device specific minor updates and a kernel doc change" * 'for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ata: pata_arasam_cf: Use devm_clk_get libata: fix libata-core.c kernel-doc warning ata: sata_rcar: Remove obsolete sata-r8a779* platform_device_id entries
| * libata: fix libata-core.c kernel-doc warningRandy Dunlap2015-08-101-0/+1
| | | | | | | | | | | | | | | | | | Fix kernel-doc warning in libata-core.c: Warning(..//drivers/ata/libata-core.c:4763): No description found for parameter 'tag' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Tejun Heo <tj@kernel.org>
* | Add factory recertified Crucial M500s to blacklistGuillermo A. Amaral2015-08-261-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | The Crucial M500 is known to have issues with queued TRIM commands, the factory recertified SSDs use a different model number naming convention which causes them to get ignored by the blacklist. The new naming convention boils down to: s/Crucial_/FC/ Signed-off-by: Guillermo A. Amaral <g@maral.me> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
* | Revert "libata: Implement support for sense data reporting"Tejun Heo2015-08-031-19/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit fe7173c206de63fc28475ee6ae42ff95c05692de. As implemented, ACS-4 sense reporting for ATA devices bypasses error diagnosis and handling in libata degrading EH behavior significantly. Revert the related changes for now. ATA_ID_COMMAND_SET_3/4 constants are not reverted as they're used by later changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Hannes Reinecke <hare@suse.de> Cc: stable@vger.kernel.org #v4.1+
* | Revert "libata-eh: Set 'information' field for autosense"Tejun Heo2015-08-031-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | This reverts commit a1524f226a02aa6edebd90ae0752e97cfd78b159. As implemented, ACS-4 sense reporting for ATA devices bypasses error diagnosis and handling in libata degrading EH behavior significantly. Revert the related changes for now. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Hannes Reinecke <hare@suse.de> Cc: stable@vger.kernel.org #v4.1+
* | libata: Do not blacklist M510DCMartin K. Petersen2015-07-161-1/+1
| | | | | | | | | | | | | | | | | | | | A new Micron drive was just announced, once again recycling the first part of the model string. Add an underscore to the M510/M550 pattern to avoid picking up the new DC drive. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Tejun Heo <tj@kernel.org>
* | libata: increase the timeout when setting transfer modeMikulas Patocka2015-07-151-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | I have a ST4000DM000 disk. If Linux is booted while the disk is spun down, the command that sets transfer mode causes the disk to spin up. The spin-up takes longer than the default 5s timeout, so the command fails and timeout is reported. Fix this by increasing the timeout to 15s, which is enough for the disk to spin up. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Tejun Heo <tj@kernel.org>
* | libata: add ATA_HORKAGE_MAX_SEC_1024 to revert back to previous max_sectors ↵David Milburn2015-07-151-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | limit Since no longer limiting max_sectors to BLK_DEF_MAX_SECTORS (commit 34b48db66e08), data corruption may occur on ST380013AS drive configured on 82801JI (ICH10 Family) SATA controller. This patch will allow the driver to limit max_sectors as before # cat /sys/block/sdb/queue/max_sectors_kb 512 I was able to double the max_sectors_kb value up to 16384 on linux-4.2.0-rc2 before seeing corruption, but seems safer to use previous limit. Without this patch max_sectors_kb will be 32767. tj: Minor comment update. Reported-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: David Milburn <dmilburn@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org # v3.19 and later Fixes: 34b48db66e08 ("block: remove artifical max_hw_sectors cap")
* | libata: force disable trim for SuperSSpeed S238Arne Fitzenreiter2015-07-151-0/+3
| | | | | | | | | | | | | | | | | | | | This device loses blocks, often the partition table area, on trim. Disable TRIM. http://pcengines.ch/msata16a.htm Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
* | libata: add ATA_HORKAGE_BROKEN_FPDMA_AA quirk for HP 250GB SATA disk VB0250EAVERAleksei Mamlin2015-07-141-1/+2
|/ | | | | | | | | | | | | | | Enabling AA on HP 250GB SATA disk VB0250EAVER causes errors: [ 3.788362] ata3.00: failed to enable AA (error_mask=0x1) [ 3.789243] ata3.00: failed to enable AA (error_mask=0x1) Add the ATA_HORKAGE_BROKEN_FPDMA_AA for this specific harddisk. tj: Collected FPDMA_AA entries and updated comment. Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
* Merge branch 'for-4.2' of ↵Linus Torvalds2015-06-261-8/+5Star
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata updates from Tejun Heo: - a number of libata core changes to better support NCQ TRIM. - ahci now supports MSI-X in single IRQ mode to support a new controller which doesn't implement MSI or INTX. - ahci now supports edge-triggered IRQ mode to support a new controller which for some odd reason did edge-triggered IRQ. - the usual controller support additions and changes. * 'for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (27 commits) libata: Do not blacklist Micron M500DC ata: ahci_mvebu: add suspend/resume support ahci, msix: Fix build error for !PCI_MSI ahci: Add support for Cavium's ThunderX host controller ahci: Add generic MSI-X support for single interrupts to SATA PCI driver libata: finally use __initconst in ata_parse_force_one() drivers: ata: add support for Ceva sata host controller devicetree:bindings: add devicetree bindings for ceva ahci ahci: added support for Freescale AHCI sata ahci: Store irq number in struct ahci_host_priv ahci: Move interrupt enablement code to a separate function Doc: libata: Fix spelling typo found in libata.xml ata:sata_nv - Change 1 to true for bool type variable. ata: add Broadcom AHCI SATA3 driver for STB chips Documentation: devicetree: add Broadcom SATA binding libata: Fix regression when the NCQ Send and Receive log page is absent ata: hpt366: fix constant cast warning ata: ahci_xgene: potential NULL dereference in probe ata: ahci_xgene: Add AHCI Support for 2nd HW version of APM X-Gene SoC AHCI SATA Host controller. libahci: Add support to handle HOST_IRQ_STAT as edge trigger latch. ...
| * libata: Do not blacklist Micron M500DCMartin K. Petersen2015-06-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | Queued TRIM got disabled on Micron M500DC drives thanks to the "Micron_M500*" pattern we had in place to accommodate the previous generation of this drive family. Tweak the blacklist entry slightly so we only disable queued TRIM for the non-DC variants of M500 drives. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Tejun Heo <tj@kernel.org>
| * libata: finally use __initconst in ata_parse_force_one()Rasmus Villemoes2015-06-101-6/+1Star
| | | | | | | | | | | | | | | | | | | | | | Just six days after this FIXME was added seven years ago, Sam Ravnborg added the missing feature (37c514e3dfc8 "Add missing init section definitions"), though it ended up being called __initconst. Let's use it; better late than never. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Tejun Heo <tj@kernel.org>
| * Doc: libata: Fix spelling typo found in libata.xmlMasanari Iida2015-05-291-1/+1
| | | | | | | | | | | | | | | | | | This patch fix a spelling typo found in libata.xml. It is because libata.xml is generated from comments in source, I have to fix it in libata-core.c Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
| * libata: Allow NCQ TRIM to be enabled or disabled with a module parameterMartin K. Petersen2015-05-051-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | We have started seeing SSD firmware updates introduce support for queued TRIM. Sadly, in most cases this support is completely untested and can lead to either errors or data corruption. Add two libata force flags that can be used to either enable or disable queued TRIM support. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Tejun Heo <tj@kernel.org>
* | libata: Blacklist queued TRIM on all Samsung 800-seriesMartin K. Petersen2015-05-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The queued TRIM problems appear to be generic to Samsung's firmware and not tied to a particular model. A recent update to the 840 EVO firmware introduced the same issue as we saw on 850 Pro. Blacklist queued TRIM on all 800-series drives while we work this issue with Samsung. Reported-by: Günter Waller <g.wal@web.de> Reported-by: Sven Köhler <sven.koehler@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Tejun Heo <tj@kernel.org>
* | libata: Ignore spurious PHY event on LPM policy changeGabriele Mazzotta2015-04-251-1/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | When the LPM policy is set to ATA_LPM_MAX_POWER, the device might generate a spurious PHY event that cuases errors on the link. Ignore this event if it occured within 10s after the policy change. The timeout was chosen observing that on a Dell XPS13 9333 these spurious events can occur up to roughly 6s after the policy change. Link: http://lkml.kernel.org/g/3352987.ugV1Ipy7Z5@xps13 Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
* | libata: Add helper to determine when PHY events should be ignoredGabriele Mazzotta2015-04-251-0/+19
|/ | | | | | | | | This is a preparation commit that will allow to add other criteria according to which PHY events should be dropped. Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
* Merge branch 'for-4.1' of ↵Linus Torvalds2015-04-141-4/+28
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata updates from Tejun Heo: - Hannes's patchset implements support for better error reporting introduced by the new ATA command spec. - the deperecated pci_ dma API usages have been replaced by dma_ ones. - a bunch of hardware specific updates and some cleanups. * 'for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ata: remove deprecated use of pci api ahci: st: st_configure_oob must be called after IP is clocked. ahci: st: Update the ahci_st DT documentation ahci: st: Update the DT example for how to obtain the PHY. sata_dwc_460ex: indent an if statement libata: Add tracepoints libata-eh: Set 'information' field for autosense libata: Implement support for sense data reporting libata: Implement NCQ autosense libata: use status bit definitions in ata_dump_status() ide,ata: Rename ATA_IDX to ATA_SENSE libata: whitespace fixes in ata_to_sense_error() libata: whitespace cleanup in ata_get_cmd_descript() libata: use READ_LOG_DMA_EXT libata: remove ATA_FLAG_LOWTAG sata_dwc_460ex: re-use hsdev->dev instead of dwc_dev sata_dwc_460ex: move to generic DMA driver sata_dwc_460ex: join messages back sata: xgene: add ACPI support for APM X-Gene SATA ports ata: sata_mv: add proper definitions for LP_PHY_CTL register values
| * libata: Add tracepointsHannes Reinecke2015-03-271-1/+7
| | | | | | | | | | | | | | | | Add some tracepoints for ata_qc_issue, ata_qc_complete, and ata_eh_link_autopsy. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Tejun Heo <tj@kernel.org>
| * libata-eh: Set 'information' field for autosenseHannes Reinecke2015-03-271-2/+2
| | | | | | | | | | | | | | | | | | If NCQ autosense or the sense data reporting feature is enabled the LBA of the offending command should be stored in the sense data 'information' field. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Tejun Heo <tj@kernel.org>
| * libata: Implement support for sense data reportingHannes Reinecke2015-03-271-1/+19
| | | | | | | | | | | | | | | | ACS-4 defines a sense data reporting feature set. This patch implements support for it. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Tejun Heo <tj@kernel.org>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-15 00:30:33 +0200