summaryrefslogtreecommitdiffstats
path: root/drivers/base/base.h
Commit message (Collapse)AuthorAgeFilesLines
* driver core: correct device's shutdown orderGrygorii Strashko2015-08-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now device's shutdown sequence is performed in reverse order of their registration in devices_kset list and this sequence corresponds to the reverse device's creation order. So, devices_kset data tracks "parent<-child" device's dependencies only. Unfortunately, that's not enough and causes problems in case of implementing board's specific shutdown procedures. For example [1]: "DRA7XX_evm uses PCF8575 and one of the PCF output lines feeds to MMC/SD and this line should be driven high in order for the MMC/SD to be detected. This line is modelled as regulator and the hsmmc driver takes care of enabling and disabling it. In the case of 'reboot', during shutdown path as part of it's cleanup process the hsmmc driver disables this regulator. This makes MMC boot not functional." To handle this issue the .shutdown() callback could be implemented for PCF8575 device where corresponding GPIO pins will be configured to states, required for correct warm/cold reset. This can be achieved only when all .shutdown() callbacks have been called already for all PCF8575's consumers. But devices_kset is not filled correctly now: devices_kset: Device61 4e000000.dmm devices_kset: Device62 48070000.i2c devices_kset: Device63 48072000.i2c devices_kset: Device64 48060000.i2c devices_kset: Device65 4809c000.mmc ... devices_kset: Device102 fixedregulator-sd ... devices_kset: Device181 0-0020 // PCF8575 devices_kset: Device182 gpiochip496 devices_kset: Device183 0-0021 // PCF8575 devices_kset: Device184 gpiochip480 As can be seen from above .shutdown() callback for PCF8575 will be called before its consumers, which, in turn means, that any changes of PCF8575 GPIO's pins will be or unsafe or overwritten later by GPIO's consumers. The problem can be solved if devices_kset list will be filled not only according device creation order, but also according device's probing order to track "supplier<-consumer" dependencies also. Hence, as a fix, lets add devices_kset_move_last(), devices_kset_move_before(), devices_kset_move_after() and call them from device_move() and also add call of devices_kset_move_last() in really_probe(). After this change all entries in devices_kset will be sorted according to device's creation ("parent<-child") and probing ("supplier<-consumer") order. devices_kset after: devices_kset: Device121 48070000.i2c devices_kset: Device122 i2c-0 ... devices_kset: Device147 regulator.24 devices_kset: Device148 0-0020 devices_kset: Device149 gpiochip496 devices_kset: Device150 0-0021 devices_kset: Device151 gpiochip480 devices_kset: Device152 0-0019 ... devices_kset: Device372 fixedregulator-sd devices_kset: Device373 regulator.29 devices_kset: Device374 4809c000.mmc devices_kset: Device375 mmc0 [1] http://www.spinics.net/lists/linux-mmc/msg29825.html Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* driver core: fix docbook for device_private.deviceTomeu Vizoso2015-08-061-1/+1
| | | | | | | This field refers to the public device struct, not to classes. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* driver-core: add asynchronous probing support for driversDmitry Torokhov2015-05-201-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | Some devices take a long time when initializing, and not all drivers are suited to initialize their devices when they are open. For example, input drivers need to interrogate their devices in order to publish device's capabilities before userspace will open them. When such drivers are compiled into kernel they may stall entire kernel initialization. This change allows drivers request for their probe functions to be called asynchronously during driver and device registration (manual binding is still synchronous). Because async_schedule is used to perform asynchronous calls module loading will still wait for the probing to complete. Note that the end goal is to make the probing asynchronous by default, so annotating drivers with PROBE_PREFER_ASYNCHRONOUS is a temporary measure that allows us to speed up boot process while we validating and fixing the rest of the drivers and preparing userspace. This change is based on earlier patch by "Luis R. Rodriguez" <mcgrof@suse.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* driver core: Move driver_data back to struct deviceJean Delvare2014-05-271-3/+0Star
| | | | | | | | | | | Having to allocate memory as part of dev_set_drvdata() is a problem because that memory may never get freed if the device itself is not created. So move driver_data back to struct device. This is a partial revert of commit b4028437. Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ACPI / hotplug / driver core: Handle containers in a special wayRafael J. Wysocki2013-12-291-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ACPI container devices require special hotplug handling, at least on some systems, since generally user space needs to carry out system-specific cleanup before it makes sense to offline devices in the container. However, the current ACPI hotplug code for containers first attempts to offline devices in the container and only then it notifies user space of the container offline. Moreover, after commit 202317a573b2 (ACPI / scan: Add acpi_device objects for all device nodes in the namespace), ACPI device objects representing containers are present as long as the ACPI namespace nodes corresponding to them are present, which may be forever, even if the container devices are physically detached from the system (the return values of the corresponding _STA methods change in those cases, but generally the namespace nodes themselves are still there). Thus it is useful to introduce entities representing containers that will go away during container hot-unplug. The goal of this change is to address both the above issues. The idea is to create a "companion" container system device for each of the ACPI container device objects during the initial namespace scan or on a hotplug event making the container present. That system device will be unregistered on container removal. A new bus type for container devices is added for this purpose, because device offline and online operations need to be defined for them. The online operation is a trivial function that is always successful and the offline uses a callback pointed to by the container device's offline member. For ACPI containers that callback simply walks the list of ACPI device objects right below the container object (its children) and checks if all of their physical companion devices are offline. If that's not the case, it returns -EBUSY and the container system devivce cannot be put offline. Consequently, to put the container system device offline, it is necessary to put all of the physical devices depending on its ACPI companion object offline beforehand. Container system devices created for ACPI container objects are initially online. They are created by the container ACPI scan handler whose hotplug.demand_offline flag is set. That causes acpi_scan_hot_remove() to check if the companion container system device is offline before attempting to remove an ACPI container or any devices below it. If the check fails, a KOBJ_CHANGE uevent is emitted for the container system device in question and user space is expected to offline all devices below the container and the container itself in response to it. Then, user space can finalize the removal of the container with the help of its ACPI device object's eject attribute in sysfs. Tested-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* driver core: bus_type: add drv_groupsGreg Kroah-Hartman2013-08-131-0/+5
| | | | | | | | | | | attribute groups are much more flexible than just a list of attributes, due to their support for visibility of the attributes, and binary attributes. Add drv_groups to struct bus_type which should be used instead of drv_attrs. drv_attrs will be removed from the structure soon. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* driver core: bus_type: add dev_groupsGreg Kroah-Hartman2013-08-131-0/+5
| | | | | | | | | | | attribute groups are much more flexible than just a list of attributes, due to their support for visibility of the attributes, and binary attributes. Add dev_groups to struct bus_type which should be used instead of dev_attrs. dev_attrs will be removed from the structure soon. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* driver/base: implement subsys_virtual_register()Tejun Heo2013-03-121-0/+2
| | | | | | | | | | | | | | | | | | | | | Kay tells me the most appropriate place to expose workqueues to userland would be /sys/devices/virtual/workqueues/WQ_NAME which is symlinked to /sys/bus/workqueue/devices/WQ_NAME and that we're lacking a way to do that outside of driver core as virtual_device_parent() isn't exported and there's no inteface to conveniently create a virtual subsystem. This patch implements subsys_virtual_register() by factoring out subsys_register() from subsys_system_register() and using it with virtual_device_parent() as the origin directory. It's identical to subsys_system_register() other than the origin directory but we aren't gonna restrict the device names which should be used under it. This will be used to expose workqueue attributes to userland. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Kay Sievers <kay.sievers@vrfy.org>
* driver core: move the deferred probe pointer into the private areaGreg Kroah-Hartman2012-03-081-0/+5
| | | | | | | | | Nothing outside of the driver core needs to get to the deferred probe pointer, so move it inside the private area of 'struct device' so no one tries to mess around with it. Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drivercore: Add driver probe deferral mechanismGrant Likely2012-03-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow drivers to report at probe time that they cannot get all the resources required by the device, and should be retried at a later time. This should completely solve the problem of getting devices initialized in the right order. Right now this is mostly handled by mucking about with initcall ordering which is a complete hack, and doesn't even remotely handle the case where device drivers are in modules. This approach completely sidesteps the issues by allowing driver registration to occur in any order, and any driver can request to be retried after a few more other drivers get probed. v4: - Integrate Manjunath's addition of a separate workqueue - Change -EAGAIN to -EPROBE_DEFER for drivers to trigger deferral - Update comment blocks to reflect how the code really works v3: - Hold off workqueue scheduling until late_initcall so that the bulk of driver probes are complete before we start retrying deferred devices. - Tested with simple use cases. Still needs more testing though. Using it to get rid of the gpio early_initcall madness, or to replace the ASoC internal probe deferral code would be ideal. v2: - added locking so it should no longer be utterly broken in that regard - remove device from deferred list at device_del time. - Still completely untested with any real use case, but has been boot tested. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dilan Lee <dilee@nvidia.com> Cc: Manjunath GKondaiah <manjunath.gkondaiah@linaro.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Tony Lindgren <tony@atomide.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: David Daney <david.daney@cavium.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* cpu: Do not return errors from cpu_dev_init() which will be ignoredBen Hutchings2012-01-121-1/+1
| | | | | | | | | | | | | cpu_dev_init() is only called from driver_init(), which does not check its return value. Therefore make cpu_dev_init() return void. We must register the CPU subsystem, so panic if this fails. If sched_create_sysfs_power_savings_entries() fails, the damage is contained, so ignore this (as before). Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* driver-core: implement 'sysdev' functionality for regular devices and busesKay Sievers2011-12-141-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | All sysdev classes and sysdev devices will converted to regular devices and buses to properly hook userspace into the event processing. There is no interesting difference between a 'sysdev' and 'device' which would justify to roll an entire own subsystem with different userspace export semantics. Userspace relies on events and generic sysfs subsystem infrastructure from sysdev devices, which are currently not properly available. Every converted sysdev class will create a regular device with the class name in /sys/devices/system and all registered devices will becom a children of theses devices. For compatibility reasons, the sysdev class-wide attributes are created at this parent device. (Do not copy that logic for anything new, subsystem- wide properties belong to the subsystem, not to some fake parent device created in /sys/devices.) Every sysdev driver is implemented as a simple subsystem interface now, and no longer called a driver. After all sysdev classes are ported to regular driver core entities, the sysdev implementation will be entirely removed from the kernel. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* drivers/base: base.h implicitly depends on <linux/notifier.h>Paul Gortmaker2011-11-011-0/+1
| | | | | | | | | | | | | | This file is currently relying on <linux/module.h> sneaking it in through the implicit include paths from device.h. Once that is cleaned up, this will happen: In file included from drivers/base/init.c:12: drivers/base/base.h:34: error: field ‘bus_notifier’ has incomplete type make[3]: *** [drivers/base/init.o] Error 1 Fix it up in advance, so the cleanup can continue. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* PM: Remove sysdev suspend, resume and shutdown operationsRafael J. Wysocki2011-05-111-2/+0Star
| | | | | | | | | | | | Since suspend, resume and shutdown operations in struct sysdev_class and struct sysdev_driver are not used any more, remove them. Also drop sysdev_suspend(), sysdev_resume() and sysdev_shutdown() used for executing those operations and modify all of their users accordingly. This reduces kernel code size quite a bit and reduces its complexity. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
* driver-core: merge private parts of class and busKay Sievers2010-11-171-37/+25Star
| | | | | | | | | As classes and busses are pretty much the same thing, and we want to merge them together into a 'subsystem' in the future, let us share the same private data parts to make that merge easier. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Driver Core: devtmpfs - kernel-maintained tmpfs-based /devKay Sievers2009-09-151-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Devtmpfs lets the kernel create a tmpfs instance called devtmpfs very early at kernel initialization, before any driver-core device is registered. Every device with a major/minor will provide a device node in devtmpfs. Devtmpfs can be changed and altered by userspace at any time, and in any way needed - just like today's udev-mounted tmpfs. Unmodified udev versions will run just fine on top of it, and will recognize an already existing kernel-created device node and use it. The default node permissions are root:root 0600. Proper permissions and user/group ownership, meaningful symlinks, all other policy still needs to be applied by userspace. If a node is created by devtmps, devtmpfs will remove the device node when the device goes away. If the device node was created by userspace, or the devtmpfs created node was replaced by userspace, it will no longer be removed by devtmpfs. If it is requested to auto-mount it, it makes init=/bin/sh work without any further userspace support. /dev will be fully populated and dynamic, and always reflect the current device state of the kernel. With the commonly used dynamic device numbers, it solves the problem where static devices nodes may point to the wrong devices. It is intended to make the initial bootup logic simpler and more robust, by de-coupling the creation of the inital environment, to reliably run userspace processes, from a complex userspace bootstrap logic to provide a working /dev. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Jan Blunck <jblunck@suse.de> Tested-By: Harald Hoyer <harald@redhat.com> Tested-By: Scott James Remnant <scott@ubuntu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Driver core: move dev_get/set_drvdata to drivers/base/dd.cGreg Kroah-Hartman2009-09-151-0/+5
| | | | | | | | | | | | | No one should directly access the driver_data field, so remove the field and make it private. We dynamically create the private field now if it is needed, to handle drivers that call get/set before they are registered with the driver core. Also update the copyright notices on these files while we are there. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Driver core: add new device to bus's list before probingAlan Stern2009-09-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1271) affects when new devices get linked into their bus's list of devices. Currently this happens after probing, and it doesn't happen at all if probing fails. Clearly this is wrong, because at that point quite a few symbolic links have already been created in sysfs. We are committed to adding the device, so it should be linked into the bus's list regardless. In addition, this needs to happen before the uevent announcing the new device gets issued. Otherwise user programs might try to access the device before it has been added to the bus. To fix both these problems, the patch moves the call to klist_add_tail() forward from bus_attach_device() to bus_add_device(). Since bus_attach_device() now does nothing but probe for drivers, it has been renamed to bus_probe_device(). And lastly, the kerneldoc is updated. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* driver core: fix driver_match_deviceMing Lei2009-04-171-1/+1
| | | | | | | | | | | | | | This patch fixes a bug introduced in commit 49b420a13ff95b449947181190b08367348e3e1b. If a instance of bus_type doesn't have .match method, all .probe of drivers in the bus should be called, or else the .probe have not a chance to be called. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* driver core: move knode_bus into private structureGreg Kroah-Hartman2009-03-251-0/+4
| | | | | | | | | Nothing outside of the driver core should ever touch knode_bus, so move it out of the public eye. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* driver core: move knode_driver into private structureGreg Kroah-Hartman2009-03-251-0/+4
| | | | | | | | | Nothing outside of the driver core should ever touch knode_driver, so move it out of the public eye. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* driver core: move klist_children into private structureGreg Kroah-Hartman2009-03-251-0/+6
| | | | | | | | | Nothing outside of the driver core should ever touch klist_children, or knode_parent, so move them out of the public eye. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* driver core: create a private portion of struct deviceGreg Kroah-Hartman2009-03-251-0/+12
| | | | | | | | | This is to be used to move things out of struct device that no code outside of the driver core should ever touch. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* driver core: check bus->match without holding device lockMing Lei2009-03-251-0/+5
| | | | | | | | | | | | | | | | | | | | | | This patch moves bus->match out from driver_probe_device and does not hold device lock to check the match between a device and a driver. The idea has been verified by the commit 6cd495860901, which leads to a faster boot. But the commit 6cd495860901 has the following drawbacks: 1),only does the quick check in the path of __driver_attach->driver_probe_device, not in other paths; 2),for a matched device and driver, check the same match twice. It is a waste of cpu ,especially for some drivers with long device id table (eg. usb-storage driver). This patch adds a helper of driver_match_device to check the match in all paths, and testes the match only once. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PM: Split up sysdev_[suspend|resume] from device_power_[down|up]Rafael J. Wysocki2009-02-221-2/+0Star
| | | | | | | | | | | Move the sysdev_suspend/resume from the callee to the callers, with no real change in semantics, so that we can rework the disabling of interrupts during suspend/hibernation. This is based on an earlier patch from Linus. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Revert "driver core: create a private portion of struct device"Greg Kroah-Hartman2009-01-101-12/+0Star
| | | | | | | | | | | | | This reverts commit 2831fe6f9cc4e16c103504ee09a47a084297c0f3. Turns out that device_initialize shouldn't fail silently. This series needs to be reworked in order to get into proper shape. Reported-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Revert "driver core: move klist_children into private structure"Greg Kroah-Hartman2009-01-091-6/+0Star
| | | | | | | | | | | | | This reverts commit 11c3b5c3e08f4d855cbef52883c266b9ab9df879. Turns out that device_initialize shouldn't fail silently. This series needs to be reworked in order to get into proper shape. Reported-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Revert "driver core: move knode_driver into private structure"Greg Kroah-Hartman2009-01-091-4/+0Star
| | | | | | | | | | | | | This reverts commit 93e746db183b3bdbbda67900f79b5835f9cb388f. Turns out that device_initialize shouldn't fail silently. This series needs to be reworked in order to get into proper shape. Reported-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Revert "driver core: move knode_bus into private structure"Greg Kroah-Hartman2009-01-091-4/+0Star
| | | | | | | | | | | | | This reverts commit b9daa99ee533578e3f88231e7a16784dcb44ec42. Turns out that device_initialize shouldn't fail silently. This series needs to be reworked in order to get into proper shape. Reported-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* driver core: move knode_bus into private structureGreg Kroah-Hartman2009-01-061-0/+4
| | | | | | | | | Nothing outside of the driver core should ever touch knode_bus, so move it out of the public eye. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* driver core: move knode_driver into private structureGreg Kroah-Hartman2009-01-061-0/+4
| | | | | | | | | Nothing outside of the driver core should ever touch knode_driver, so move it out of the public eye. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* driver core: move klist_children into private structureGreg Kroah-Hartman2009-01-061-0/+6
| | | | | | | | | Nothing outside of the driver core should ever touch klist_children, or knode_parent, so move them out of the public eye. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* driver core: create a private portion of struct deviceGreg Kroah-Hartman2009-01-061-0/+12
| | | | | | | | | This is to be used to move things out of struct device that no code outside of the driver core should ever touch. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* driver-core: use klist for class device list and implement iteratorTejun Heo2008-10-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | Iterating over entries using callback usually isn't too fun especially when the entry being iterated over can't be manipulated freely. This patch converts class->p->class_devices to klist and implements class device iterator so that the users can freely build their own control structure. The users are also free to call back into class code without worrying about locking. class_for_each_device() and class_find_device() are converted to use the new iterators, so their users don't have to worry about locking anymore either. Note: This depends on klist-dont-iterate-over-deleted-entries patch because class_intf->add/remove_dev() depends on proper synchronization with device removal. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* class: change internal semaphore to a mutexDave Young2008-07-221-2/+2
| | | | | | | | | | | | | | | | Now that the lockdep infrastructure in the class core is in place, we should be able to properly change the internal class semaphore to be a mutex. David wrote the original patch, and Greg fixed it up to apply properly due to all of the recent changes in this area. From: Dave Young <hidave.darkstar@gmail.com> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* class: fix docbook comments for class_private structureGreg Kroah-Hartman2008-07-221-2/+1Star
| | | | | | | | Removes a field that has been deleted, and adds a description fo the class_dirs field which was previously undocumented. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* class: rename "sem" to "class_sem" in internal class structureGreg Kroah-Hartman2008-07-221-2/+2
| | | | | | | | | | | This renames the struct class "sem" field to be "class_sem" to make things easier when struct bus_type and struct class merge in the future. It also makes grepping for fields easier as well. Based on an idea from Kay. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* class: rename "subsys" to "class_subsys" in internal class structureGreg Kroah-Hartman2008-07-221-3/+4
| | | | | | | | | | | This renames the struct class "subsys" field to be "class_subsys" to make things easier when struct bus_type and struct class merge in the future. It also makes grepping for fields easier as well. Based on an idea from Kay. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* class: rename "interfaces" to "class_interfaces" in internal class structureGreg Kroah-Hartman2008-07-221-2/+2
| | | | | | | | | | | | This renames the struct class "interfaces" field to be "class_interfaces" to make things easier when struct bus_type and struct class merge in the future. It also makes grepping for fields easier as well. Based on an idea from Kay. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* class: rename "devices" to "class_devices" in internal class structureGreg Kroah-Hartman2008-07-221-2/+2
| | | | | | | | | | | This renames the struct class "devices" field to be "class_devices" to make things easier when struct bus_type and struct class merge in the future. It also makes grepping for fields easier as well. Based on an idea from Kay. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* class: move driver core specific parts to a private structureGreg Kroah-Hartman2008-07-221-0/+27
| | | | | | | | | | | This moves the portions of struct class that are dynamic (kobject and lock and lists) out of the main structure and into a dynamic, private, structure. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* driver core: remove no longer used "struct class_device"Kay Sievers2008-05-011-11/+0Star
| | | | | Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Driver core: coding style fixesGreg Kroah-Hartman2008-01-251-7/+7
| | | | | | | Fix up a number of coding style issues in the drivers/base/ directory that have annoyed me over the years. checkpatch.pl is now very happy. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* driver core: fix build with SYSFS=nRandy Dunlap2008-01-251-1/+1
| | | | | | | | | | | | | | | When SYSFS=n and MODULES=y, build ends with: linux-2.6.24-rc6-mm1/drivers/base/module.c: In function 'module_add_driver': linux-2.6.24-rc6-mm1/drivers/base/module.c:49: error: 'module_kset' undeclared (first use in this function) make[3]: *** [drivers/base/module.o] Error 1 Below is one possible fix. Build-tested with all 4 config combinations of SYSFS & MODULES. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Driver core: use LIST_HEAD instead of call to INIT_LIST_HEAD in __initDenis Cheng2008-01-251-1/+0Star
| | | | | | | | LIST_HEAD has been widely used, so switch to this simpler method. Signed-off-by: Denis Cheng <crquan@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Driver core: move the static kobject out of struct driverGreg Kroah-Hartman2008-01-251-0/+8
| | | | | | | | | | This patch removes the kobject, and a few other driver-core-only fields out of struct driver and into the driver core only. Now drivers can be safely create on the stack or statically (like they currently are.) Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Driver core: move the driver specific module code into the driver coreGreg Kroah-Hartman2008-01-251-0/+9
| | | | | | | | | | | | | | | The module driver specific code should belong in the driver core, not in the kernel/ directory. So move this code. This is done in preparation for some struct device_driver rework that should be confined to the driver core code only. This also lets us keep from exporting these functions, as no external code should ever be calling it. Thanks to Andrew Morton for the !CONFIG_MODULES fix. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* driver core: remove fields from struct bus_typeGreg Kroah-Hartman2008-01-251-1/+29
| | | | | | | | | | | | | | | struct bus_type is static everywhere in the kernel. This moves the kobject in the structure out of it, and a bunch of other private only to the driver core fields are now moved to a private structure. This lets us dynamically create the backing kobject properly and gives us the chance to be able to document to users exactly how to use the struct bus_type as there are no fields they can improperly access. Thanks to Kay for the build fixes on this patch. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* kset: convert /sys/devices to use kset_createGreg Kroah-Hartman2008-01-251-1/+1
| | | | | | | | | | Dynamically create the kset instead of declaring it statically. We also rename devices_subsys to devices_kset to catch all users of the variable. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Driver core: remove get_bus()Greg Kroah-Hartman2007-10-121-1/+0Star
| | | | | | | | | | get_bus() should not be globally visable as it is not used by anything other than drivers/base/bus.c. This patch removes the visability of it, and renames it to match all of the other *_get() functions in the kernel. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-11-06 14:23:56 +0100