summaryrefslogtreecommitdiffstats
path: root/drivers/char/ipmi
Commit message (Collapse)AuthorAgeFilesLines
* char: ipmi: ipmi_ssif: Replace timeval with timespec64Amitoj Kaur Chawla2015-10-251-4/+5
| | | | | | | | | | | | | | | | This patch replaces timeval with timespec64 as 32 bit 'struct timeval' will not give current time beyond 2038. The patch changes the code to use ktime_get_real_ts64() which returns a 'struct timespec64' instead of do_gettimeofday() which returns a 'struct timeval' This patch also alters the format string in pr_info() for now.tv_sec to incorporate 'long long' on 32 bit architectures. Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ipmi:ssif: Add a module parm to specify that SMBus alerts don't workCorey Minyard2015-09-031-0/+8
| | | | | | | They are broken on some platforms, this gives people a chance to work around it until the firmware is fixed. Signed-off-by: Corey Minyard <cminyard@mvista.com>
* ipmi: add of_device_id in MODULE_DEVICE_TABLEBrijesh Singh2015-09-031-0/+1
| | | | | | | | | | | Fix autoloading ipmi modules when using device tree. Signed-off-by: Brijesh Singh <brijeshkumar.singh@amd.com> Moved this change up into the CONFIG_OF section to account for changes to the probing code. Signed-off-by: Corey Minyard <cminyard@mvista.com>
* ipmi: Compensate for BMCs that wont set the irq enable bitCorey Minyard2015-09-031-43/+137
| | | | | | | | | | | | It appears that some BMCs support interrupts but don't support setting the irq enable bits. The interrupts are just always on. Sigh. Add code to compensate. The new code was very similar to another functions, so this also factors out the common code into other functions. Signed-off-by: Corey Minyard <cminyard@mvista.com> Tested-by: Henrik Korkuc <henrik@kirneh.eu>
* ipmi: Don't call receive handler in the panic contextHidehiro Kawai2015-09-031-1/+7
| | | | | | | | | | | | | Received handlers defined as ipmi_recv_hndl member of struct ipmi_user_hndl can take a spinlock. This means that if the kernel panics while holding the lock, a deadlock may happen on the lock while flushing queued messages in the panic context. Calling the receive handler doesn't make much meanings in the panic context, simply skip it to avoid possible deadlocks. Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
* ipmi: Avoid touching possible corrupted lists in the panic contextHidehiro Kawai2015-09-031-0/+17
| | | | | | | | | | | | | | | | | | | | | When processing queued messages in the panic context, IPMI driver tries to do it without any locking to avoid deadlocks. However, this means we can touch a corrupted list if the kernel panicked while manipulating the list. Fortunately, current `add-tail and del-from-head' style implementation won't touch the corrupted part, but it is inherently risky. To get rid of the risk, this patch re-initializes the message lists on panic if the related spinlock has already been acquired. As the result, we may lose queued messages, but it's not so painful. Dropping messages on the received message list is also less problematic because no one can respond the received messages. Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Fixed a comment typo. Signed-off-by: Corey Minyard <cminyard@mvista.com>
* ipmi: Don't flush messages in sender() in run-to-completion modeHidehiro Kawai2015-09-032-5/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When flushing queued messages in run-to-completion mode, smi_event_handler() is recursively called. flush_messages() smi_event_handler() handle_transaction_done() deliver_recv_msg() ipmi_smi_msg_received() smi_recv_tasklet() sender() flush_messages() smi_event_handler() ... The depth of the recursive call depends on the number of queued messages, so it can cause a stack overflow if many messages have been queued. To solve this problem, this patch removes flush_messages() from sender()@ipmi_si_intf.c. Instead, add flush_messages() to caller side of sender() if needed. Additionally, to implement this, add new handler flush_messages to struct ipmi_smi_handlers. Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Fixed up a comment and some spacing issues. Signed-off-by: Corey Minyard <cminyard@mvista.com>
* ipmi: Factor out message flushing procedureHidehiro Kawai2015-09-031-21/+18Star
| | | | | | | | Factor out message flushing procedure which is used in run-to-completion mode. This patch doesn't change the logic. Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
* ipmi: Remove unneeded set_run_to_completion callHidehiro Kawai2015-09-031-2/+0Star
| | | | | | | | | send_panic_events() calls intf->handlers->set_run_to_completion(), but it has already been done in the caller function panic_event(). Remove it from send_panic_events(). Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
* ipmi: Make some data const that was only readCorey Minyard2015-09-036-36/+39
| | | | | | | Several data structures were only used for reading, so make them const. Signed-off-by: Corey Minyard <cminyard@mvista.com>
* ipmi: constify SSIF ACPI device idsMathias Krause2015-09-031-1/+1
| | | | | | | | Constify the ACPI device ID array, it doesn't need to be writable at runtime. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
* ipmi: Delete an unnecessary check before the function call "cleanup_one_si"Markus Elfring2015-09-031-3/+1Star
| | | | | | | | | | The cleanup_one_si() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Corey Minyard <cminyard@mvista.com>
* char:ipmi - Change 1 to true for bool type variables during initialization.Shailendra Verma2015-09-032-6/+6
| | | | | Signed-off-by: Shailendra Verma <shailendra.capricorn@gmail.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
* impi:Remove unneeded setting of module owner to THIS_MODULE in the platform ↵Nicholas Krause2015-09-031-1/+0Star
| | | | | | | | | | | | structure, powernv_ipmi_driver This removes the no longer required setting of the module owner for the plaform structure,powernv_ipmi_driver to THIS_MODULE as the driver core for ipmi drivers will directly find and set the module owner for this driver. Signed-off-by: Nicholas Krause <xerofoify@gmail.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
* ipmi: Add a comment in how messages are delivered from the lower layerCorey Minyard2015-09-031-0/+4
| | | | | | To avoid confusion in the future. Signed-off-by: Corey Minyard <cminyard@mvista.com>
* ipmi/powernv: Fix potential invalid pointer dereferenceNeelesh Gupta2015-09-031-1/+8
| | | | | | | | | | | | | | | | If the OPAL call to receive the ipmi message fails, then we free up the smi message and return. But, the driver still holds the reference to old smi message in the 'cur_msg' which can potentially be accessed later and freed again leading to kernel oops. To fix it up, The kernel driver should reset the 'cur_msg' and send reply to the user in addition to freeing the message. Signed-off-by: Neelesh Gupta <neelegup@linux.vnet.ibm.com> Fixed a checkpatch warning dealing with an else after a return. Signed-off-by: Corey Minyard <cminyard@mvista.com>
* ipmi: Convert the IPMI SI ACPI handling to a platform deviceCorey Minyard2015-09-031-163/+157Star
| | | | | | | | | | | | | | | The IPMI SI driver was using direct PNP, but that was not really ideal because the IPMI device is a platform device. There was some special handling in the acpi_pnp.c code for making this work, but that was breaking ACPI handling for the IPMI SSIF driver. So without this patch there were significant issues getting the SSIF driver to work with ACPI. So use a platform device for ACPI detection and remove the entry from acpi_pnp.c. Signed-off-by: Corey Minyard <cminyard@mvista.com>
* Merge tag 'modules-next-for-linus' of ↵Linus Torvalds2015-07-011-3/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module updates from Rusty Russell: "Main excitement here is Peter Zijlstra's lockless rbtree optimization to speed module address lookup. He found some abusers of the module lock doing that too. A little bit of parameter work here too; including Dan Streetman's breaking up the big param mutex so writing a parameter can load another module (yeah, really). Unfortunately that broke the usual suspects, !CONFIG_MODULES and !CONFIG_SYSFS, so those fixes were appended too" * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (26 commits) modules: only use mod->param_lock if CONFIG_MODULES param: fix module param locks when !CONFIG_SYSFS. rcu: merge fix for Convert ACCESS_ONCE() to READ_ONCE() and WRITE_ONCE() module: add per-module param_lock module: make perm const params: suppress unused variable error, warn once just in case code changes. modules: clarify CONFIG_MODULE_COMPRESS help, suggest 'N'. kernel/module.c: avoid ifdefs for sig_enforce declaration kernel/workqueue.c: remove ifdefs over wq_power_efficient kernel/params.c: export param_ops_bool_enable_only kernel/params.c: generalize bool_enable_only kernel/module.c: use generic module param operaters for sig_enforce kernel/params: constify struct kernel_param_ops uses sysfs: tightened sysfs permission checks module: Rework module_addr_{min,max} module: Use __module_address() for module_address_lookup() module: Make the mod_tree stuff conditional on PERF_EVENTS || TRACING module: Optimize __module_address() using a latched RB-tree rbtree: Implement generic latch_tree seqlock: Introduce raw_read_seqcount_latch() ...
| * kernel/params: constify struct kernel_param_ops usesLuis R. Rodriguez2015-05-281-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most code already uses consts for the struct kernel_param_ops, sweep the kernel for the last offending stragglers. Other than include/linux/moduleparam.h and kernel/params.c all other changes were generated with the following Coccinelle SmPL patch. Merge conflicts between trees can be handled with Coccinelle. In the future git could get Coccinelle merge support to deal with patch --> fail --> grammar --> Coccinelle --> new patch conflicts automatically for us on patches where the grammar is available and the patch is of high confidence. Consider this a feature request. Test compiled on x86_64 against: * allnoconfig * allmodconfig * allyesconfig @ const_found @ identifier ops; @@ const struct kernel_param_ops ops = { }; @ const_not_found depends on !const_found @ identifier ops; @@ -struct kernel_param_ops ops = { +const struct kernel_param_ops ops = { }; Generated-by: Coccinelle SmPL Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Junio C Hamano <gitster@pobox.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Kees Cook <keescook@chromium.org> Cc: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: cocci@systeme.lip6.fr Cc: linux-kernel@vger.kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
* | ipmi/powernv: Convert to irq event interfaceAlistair Popple2015-05-221-17/+22
|/ | | | | | | | | | Convert the opal ipmi driver to use the new irq interface for events. Signed-off-by: Alistair Popple <alistair@popple.id.au> Acked-by: Corey Minyard <cminyard@mvista.com> Cc: Corey Minyard <minyard@acm.org> Cc: openipmi-developer@lists.sourceforge.net Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* ipmi: Fix multi-part message handlingCorey Minyard2015-05-061-13/+38
| | | | | | | | | | | | | | | | | | Lots of little fixes for multi-part messages: The values was not being re-initialized, if something went wrong handling a multi-part message and it got left in a bad state, it might be an issue. The commands were not correct when issuing multi-part reads, the code was not passing in the proper value for commands. Also clean up some minor formatting issues. Get the block number from the right location, limit the maximum send message size to 63 bytes and explain why, and fix some minor sylistic issues. Signed-off-by: Corey Minyard <cminyard@mvista.com>
* ipmi: Add alert handling to SSIFCorey Minyard2015-05-061-16/+116
| | | | | | | | | | | The SSIF interface can optionally have an SMBus alert come in when data is ready. Unfortunately, the IPMI spec gives wiggle room to the implementer to allow them to always have the alert enabled, even if the driver doesn't enable it. So implement alerts. If you don't in this situation, the SMBus alert handling will constantly complain. Signed-off-by: Corey Minyard <cminyard@mvista.com>
* ipmi: Fix a problem that messages are not issued in run_to_completion modeHidehiro Kawai2015-05-061-2/+1Star
| | | | | | | | | | | | | | | start_next_msg() issues a message placed in smi_info->waiting_msg if it is non-NULL. However, sender() sets a message to smi_info->curr_msg and NULL to smi_info->waiting_msg in the context of run_to_completion mode. As the result, it leads an infinite loop by waiting the completion of unissued message when leaving dying message after kernel panic. sender() should set the message to smi_info->waiting_msg not curr_msg. Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
* ipmi: Report an error if ACPI _IFT doesn't existCorey Minyard2015-05-061-1/+3
| | | | | | | When probing an ACPI table, report a specific error, instead of just returning an error, if _IFT doesn't exist. Signed-off-by: Corey Minyard <cminyard@mvista.com>
* ipmi: Remove unused including <linux/version.h>Wei Yongjun2015-05-061-1/+0Star
| | | | | | | Remove including <linux/version.h> that don't need it. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Corey Minyard <cminyard@mvista.com>
* ipmi: Don't report err in the SI driver for SSIF devicesCorey Minyard2015-05-051-2/+3
| | | | | | | Really ignore them by returning -ENODEV from the probe, but not doing anything. Signed-off-by: Corey Minyard <cminyard@mvista.com>
* ipmi: Remove incorrect use of seq_has_overflowedJoe Perches2015-05-053-5/+5
| | | | | | | | | | | | | | | | commit d6c5dc18d863 ("ipmi: Remove uses of return value of seq_printf") incorrectly changed the return value of various proc_show functions to use seq_has_overflowed(). These functions should return 0 on completion rather than 1/true on overflow. 1 is the same as #define SEQ_SKIP which would cause the output to not be emitted (skipped) instead. This is a logical defect only as the length of these outputs are all smaller than the initial allocation done by the seq filesystem. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
* ipmi:ssif: Ignore spaces when comparing I2C adapter namesCorey Minyard2015-05-051-3/+22
| | | | | | | | Some of the adapters have spaces in their names, but that's really hard to pass in as a module or kernel parameters. So ignore the spaces. Signed-off-by: Corey Minyard <cminyard@mvista.com>
* ipmi_ssif: Fix the logic on user-supplied addressesCorey Minyard2015-05-051-1/+1
| | | | | | Returning zero is success. Signed-off-by: Corey Minyard <cminyard@mvista.com>
* Merge tag 'char-misc-4.1-rc1' of ↵Linus Torvalds2015-04-211-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here's the big char/misc driver patchset for 4.1-rc1. Lots of different driver subsystem updates here, nothing major, full details are in the shortlog. All of this has been in linux-next for a while" * tag 'char-misc-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (133 commits) mei: trace: remove unused TRACE_SYSTEM_STRING DTS: ARM: OMAP3-N900: Add lis3lv02d support Documentation: DT: lis302: update wakeup binding lis3lv02d: DT: add wakeup unit 2 and wakeup threshold lis3lv02d: DT: use s32 to support negative values Drivers: hv: hv_balloon: correctly handle num_pages>INT_MAX case Drivers: hv: hv_balloon: correctly handle val.freeram<num_pages case mei: replace check for connection instead of transitioning mei: use mei_cl_is_connected consistently mei: fix mei_poll operation hv_vmbus: Add gradually increased delay for retries in vmbus_post_msg() Drivers: hv: hv_balloon: survive ballooning request with num_pages=0 Drivers: hv: hv_balloon: eliminate jumps in piecewiese linear floor function Drivers: hv: hv_balloon: do not online pages in offline blocks hv: remove the per-channel workqueue hv: don't schedule new works in vmbus_onoffer()/vmbus_onoffer_rescind() hv: run non-blocking message handlers in the dispatch tasklet coresight: moving to new "hwtracing" directory coresight-tmc: Adding a status interface to sysfs coresight: remove the unnecessary configuration coresight-default-sink ...
| * char: constify of_device_id arrayFabian Frederick2015-03-161-2/+2
| | | | | | | | | | | | | | | | of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | ipmi_ssif: Use interruptible completion for waiting in the threadCorey Minyard2015-04-111-3/+5
| | | | | | | | | | | | | | The code was using an normal completion, but that caused stuck task errors after a while. Use an interruptible one to avoid that. Signed-off-by: Corey Minyard <cminyard@mvista.com>
* | ipmi/powernv: Fix minor locking bugAlistair Popple2015-04-111-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | If ipmi_powernv_recv(...) is called without a current message it prints a warning and returns. However it fails to release the message lock causing the system to dead lock during any subsequent IPMI operations. This error path should never normally be taken unless there are bugs elsewhere in the system. Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Corey Minyard <cminyard@mvista.com>
* | ipmi: Handle BMCs that don't allow clearing the rcv irq bitCorey Minyard2015-04-111-7/+102
|/ | | | | | | | | | | Some BMCs don't let you clear the receive irq bit in the global enables. This is kind of silly, but they give an error if you try to clear it. Compensate for this by detecting the situation and working around it. Signed-off-by: Corey Minyard <cminyard@mvista.com> Tested-by: Thomas D <whissi@whissi.de> Reviewed-by: Thomas D <whissi@whissi.de>
* ipmi: Fix a memory ordering issueCorey Minyard2015-02-201-4/+10
| | | | | | | | | | From a locking point of view it is safe to check waiting_msg without a lock, but there is a memory ordering issue that causes it to possibly not be set right when viewed from another processor. We are already claiming a lock right after that, move the check to inside the lock to enforce the memory ordering. Signed-off-by: Corey Minyard <cminyard@mvista.com>
* ipmi: Remove uses of return value of seq_printfJoe Perches2015-02-203-16/+26
| | | | | | | | | The seq_printf like functions will soon be changed to return void. Convert these uses to check seq_has_overflowed instead. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
* ipmi: Use is_visible callback for conditional sysfs entriesTakashi Iwai2015-02-201-43/+17Star
| | | | | | | | | | Instead of manual calls of device_create_file() and device_remove_file(), implement the condition in is_visible callback for the attribute group and put these entries to the group, too. This simplifies the code and avoids the possible races. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Corey Minyard <cminyard@mvista.com>
* ipmi: Free ipmi_recv_msg messages from the linked list on closeNicholas Krause2015-02-201-1/+5
| | | | | | | | | | | | This adds a loop through the elements in the linked list, recv_msgs using list_for_entry_safe in order to free messages in this list. In addition we are using the safe version of this marco in order to prevent use after bugs related to deleting the element we are on currently by holding a pointer to the next element after the current one we are on and freeing with the function, ipmi_free_recv_msg internally in this loop. Signed-off-by: Nicholas Krause <xerofoify@gmail.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
* ipmi: avoid gcc warningArnd Bergmann2015-02-201-8/+21
| | | | | | | | | | | | | | | | | | | A new harmless warning has come up on ARM builds with gcc-4.9: drivers/char/ipmi/ipmi_msghandler.c: In function 'smi_send.isra.11': include/linux/spinlock.h:372:95: warning: 'flags' may be used uninitialized in this function [-Wmaybe-uninitialized] raw_spin_unlock_irqrestore(&lock->rlock, flags); ^ drivers/char/ipmi/ipmi_msghandler.c:1490:16: note: 'flags' was declared here unsigned long flags; ^ This could be worked around by initializing the 'flags' variable, but it seems better to rework the code to avoid this. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 7ea0ed2b5be81 ("ipmi: Make the message handler easier to use for SMI interfaces") Signed-off-by: Corey Minyard <cminyard@mvista.com>
* ipmi: Update timespec usage to timespec64John Stultz2015-02-201-12/+13
| | | | | | | | | | As part of the internal y2038 cleanup, this patch removes timespec usage in the ipmi driver, replacing it timespec64 Cc: openipmi-developer@lists.sourceforge.net Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Corey Minyard <minyard@mvista.com>
* ipmi: Cleanup DEBUG_TIMING ifdef usageJohn Stultz2015-02-201-40/+21Star
| | | | | | | | | | | | | | | The driver uses #ifdef DEBUG_TIMING in order to conditionally print out timestamped debug messages. Unfortunately it adds the ifdefs all over the usage sites. This patch cleans it up by adding a debug_timestamp() function which is compiled out if DEBUG_TIMING isn't present. This cleans up all the ugly ifdefs in the function logic. Cc: openipmi-developer@lists.sourceforge.net Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Corey Minyard <minyard@mvista.com>
* drivers:char:ipmi: Remove unneeded FIXME comment in the file,ipmi_si_intf.cNicholas Krause2015-02-201-1/+0Star
| | | | | | | | | | | Removes a no longer needed FIXME comment in the function,acpi_gpe_irq_setup for the file,ipmi_si_intf.c. This comment is no longer needed as clearly we are passing the correct level of ACPI_GPE_LEVEL_TRIGGERED to the installer function,acpi_install_gpe_handler due to no breakage after years of using this ACPI level in the function,acpi_install_gpe_handler. Signed-off-by: Nicholas Krause <xerofoify@gmail.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
* char: ipmi: Remove obsolete cleanup for clientdataWolfram Sang2015-02-201-2/+0Star
| | | | | | | | A few new i2c-drivers came into the kernel which clear the clientdata-pointer on exit or error. This is obsolete meanwhile, the core will do it. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Corey Minyard <cminyard@mvista.com>
* ipmi: Remove a FIXME for slab conversionCorey Minyard2015-02-201-1/+0Star
| | | | | | | | | There can't be more than a few IPMI messages allocated at any one time, so converting the messages to slabs would be a waste. So just remove the FIXME. Suggested-by: Nicholas Krause <xerofoify@gmail.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
* ipmi: Fix compile warning with tv_usecCorey Minyard2014-12-301-1/+2
| | | | | | It's not a long int on all arches. Signed-off-by: Corey Minyard <cminyard@mvista.com>
* ipmi: Fix compile issue with isspace()Corey Minyard2014-12-221-0/+1
| | | | | | | Some arches don't get ctypes.h included from these includes, so add it explicitly. Signed-off-by: Corey Minyard <cminyard@mvista.com>
* ipmi: Finish cleanup of BMC attributesCorey Minyard2014-12-221-29/+17Star
| | | | | | | | | | | | | | | | The previous cleanup of BMC attributes left a few holes, and if you run with lockdep debugging with a BMC with the proper attributes, you could get a warning. This patch removes all the unused attributes from the BMC structure, since they are all declared in the .data section now. It makes the attributes all static. It fixes the referencing of the attributes in a couple of cases that dynamically added the files depending on BMC information. Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: Huang Ying <ying.huang@intel.com> Tested-by: Alexei Starovoitov <ast@plumgrid.com>
* Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds2014-12-151-1/+0Star
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
| * char: ipmi: drop owner assignment from platform_driversWolfram Sang2014-10-201-1/+0Star
| | | | | | | | | | | | | | A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* | ipmi: Check the BT interrupt enable periodicallyCorey Minyard2014-12-111-2/+25
| | | | | | | | | | | | | | | | | | | | On a reset, the BMC may reset the BT enable in the processor registers (different than the global enables in the BMC). Check it periodically and fix it if necessary. Signed-off-by: Corey Minyard <cminyard@mvista.com> Tested-by: Tony Rex <tony.rex@ericsson.com> Tested-by: Magnus Johansson E <magnus.e.johansson@ericsson.com>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-22 02:09:40 +0200