summaryrefslogtreecommitdiffstats
path: root/drivers/char/pcmcia
Commit message (Collapse)AuthorAgeFilesLines
* tty: Remove ASYNC_CLOSING checks in open()/hangup() methodsPeter Hurley2015-10-181-9/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | Since at least before 2.6.30, tty drivers that do not drop the tty lock while closing cannot observe ASYNC_CLOSING set while holding the tty lock; this includes the tty driver's open() and hangup() methods, since the tty core calls these methods holding the tty lock. For these drivers, waiting for ASYNC_CLOSING to clear while opening is not required, since this condition cannot occur. Similarly, even when the open() method drops and reacquires the tty lock after blocking, ASYNC_CLOSING cannot be set (again, for drivers that do not drop the tty lock while closing). Now that tty port drivers no longer drop the tty lock while closing (since 'tty: Remove tty_wait_until_sent_from_close()'), the same conditions apply: waiting for ASYNC_CLOSING to clear while opening is not required, nor is re-checking ASYNC_CLOSING after dropping and reacquiring the tty lock while blocking (eg., in *_block_til_ready()). Note: The ASYNC_CLOSING flag state is still maintained since several bitrotting drivers use it for (dubious) other purposes. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'char-misc-4.2-rc1' of ↵Linus Torvalds2015-06-261-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here's the big char/misc driver pull request for 4.2-rc1. Lots of mei, extcon, coresight, uio, mic, and other driver updates in here. Full details in the shortlog. All of these have been in linux-next for some time with no reported problems" * tag 'char-misc-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (176 commits) mei: me: wait for power gating exit confirmation mei: reset flow control on the last client disconnection MAINTAINERS: mei: add mei_cl_bus.h to maintained file list misc: sram: sort and clean up included headers misc: sram: move reserved block logic out of probe function misc: sram: add private struct device and virt_base members misc: sram: report correct SRAM pool size misc: sram: bump error message level on unclean driver unbinding misc: sram: fix device node reference leak on error misc: sram: fix enabled clock leak on error path misc: mic: Fix reported static checker warning misc: mic: Fix randconfig build error by including errno.h uio: pruss: Drop depends on ARCH_DAVINCI_DA850 from config uio: pruss: Add CONFIG_HAS_IOMEM dependence uio: pruss: Include <linux/sizes.h> extcon: Redefine the unique id of supported external connectors without 'enum extcon' type char:xilinx_hwicap:buffer_icap - change 1/0 to true/false for bool type variable in function buffer_icap_set_configuration(). Drivers: hv: vmbus: Allocate ring buffer memory in NUMA aware fashion parport: check exclusive access before register w1: use correct lock on error in w1_seq_show() ...
| * char:pcmcia:synclink_cs - Do not initialise statics to 0.Shailendra Verma2015-05-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | Static variables are initialised to 0 by GCC. Fixes the following checkpatch error: ERROR: do not initialise statics to 0 or NULL FILE: drivers/char/pcmcia/synclink_cs.c:440: static bool break_on_load = 0; Signed-off-by: Shailendra Verma <shailendra.capricorn@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | pcmcia: Convert dev_printk to dev_<level>Joe Perches2015-05-301-3/+2Star
|/ | | | | | | | | | | | | | | Reduce object size a little by using dev_<level> calls instead of dev_printk(KERN_<LEVEL>. Other miscellanea: o Coalesce formats o Realign arguments o Use pr_cont instead of naked printk reorder test to use "%s\n" Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
* char: synclink: Remove WARN_ON for bad port countPeter Hurley2014-07-111-2/+0Star
| | | | | | | | tty_port_close_start() already validates the port counts and issues a diagnostic if validation fails. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tty: Remove tty_hung_up_p() tests from tty drivers' open()Peter Hurley2014-07-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since at least before 2.6.30, it has not been possible to observe a hung up file pointer in a tty driver's open() method unless/until the driver open() releases the tty_lock() (eg., before blocking). This is because tty_open() adds the file pointer while holding the tty_lock() _and_ doesn't release the lock until after calling the tty driver's open() method. [ Before tty_lock(), this was lock_kernel(). ] Since __tty_hangup() first waits on the tty_lock() before enumerating and hanging up the open file pointers, either __tty_hangup() will wait for the tty_lock() or tty_open() will not yet have added the file pointer. For example, CPU 0 | CPU 1 | tty_open | __tty_hangup .. | .. tty_lock | .. tty_reopen | tty_lock / blocks .. | tty_add_file(tty, filp) | .. | tty->ops->open(tty, filp) | tty_port_open | tty_port_block_til_ready | .. | while (1) | .. | tty_unlock | / unblocks schedule | for each filp on tty->tty_files | f_ops = tty_hung_up_fops; | .. | tty_unlock tty_lock | .. | tty_unlock | Note that since tty_port_block_til_ready() and similar drop the tty_lock while blocking, when woken, the file pointer must then be tested for having been hung up. Also, fix bit-rotted drivers that used extra_count to track the port->count bump. CC: Mikael Starvik <starvik@axis.com> CC: Samuel Ortiz <samuel@sortiz.org> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tty: Fix help text of SYNCLINK_CSJean Delvare2014-04-161-1/+1
| | | | | | | Enabling SYNCLINK_CS as a module builds synclink_cs, not synclinkmp. Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tty: synclink: avoid sleep_on raceArnd Bergmann2014-01-081-2/+2
| | | | | | | | | | | | | | | | | | | The four variants of the synclink driver use the same code in their open() callback to wait for a port in process of being closed, using interruptible_sleep_on, which is racy and going away soon. Making things worse, these functions hold the BTM while doing so, which means that if we ever enter this code path, we cannot actually continue since the other thread that is in process of closing the port can no longer get the BTM. This addresses both issues by using wait_event_interruptible_tty() instead. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* pcmcia: synclink_cs: replace sum of bitmasks with OR operation.Alexandru Juncu2013-07-271-13/+13
| | | | | | | Suggested by coccinelle and manually verified. Signed-off-by: Alexandru Juncu <alexj@rosedu.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Finally eradicate CONFIG_HOTPLUGStephen Rothwell2013-06-031-1/+1
| | | | | | | | | | | | | | | | | | | Ever since commit 45f035ab9b8f ("CONFIG_HOTPLUG should be always on"), it has been basically impossible to build a kernel with CONFIG_HOTPLUG turned off. Remove all the remaining references to it. Cc: Russell King <linux@arm.linux.org.uk> Cc: Doug Thompson <dougthompson@xmission.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge branch 'for-linus' of ↵Linus Torvalds2013-02-271-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs pile (part one) from Al Viro: "Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent locking violations, etc. The most visible changes here are death of FS_REVAL_DOT (replaced with "has ->d_weak_revalidate()") and a new helper getting from struct file to inode. Some bits of preparation to xattr method interface changes. Misc patches by various people sent this cycle *and* ocfs2 fixes from several cycles ago that should've been upstream right then. PS: the next vfs pile will be xattr stuff." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits) saner proc_get_inode() calling conventions proc: avoid extra pde_put() in proc_fill_super() fs: change return values from -EACCES to -EPERM fs/exec.c: make bprm_mm_init() static ocfs2/dlm: use GFP_ATOMIC inside a spin_lock ocfs2: fix possible use-after-free with AIO ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero target: writev() on single-element vector is pointless export kernel_write(), convert open-coded instances fs: encode_fh: return FILEID_INVALID if invalid fid_type kill f_vfsmnt vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op nfsd: handle vfs_getattr errors in acl protocol switch vfs_getattr() to struct path default SET_PERSONALITY() in linux/elf.h ceph: prepopulate inodes only when request is aborted d_hash_and_lookup(): export, switch open-coded instances 9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate() 9p: split dropping the acls from v9fs_set_create_acl() ...
| * new helper: file_inode(file)Al Viro2013-02-231-1/+1
| | | | | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* | Merge tag 'char-misc-3.9-rc1' of ↵Linus Torvalds2013-02-211-305/+340
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver patches from Greg Kroah-Hartman: "Here's the big char/misc driver patches for 3.9-rc1. Nothing major here, just lots of different driver updates (mei, hyperv, ipack, extcon, vmci, etc.). All of these have been in the linux-next tree for a while." * tag 'char-misc-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (209 commits) w1: w1_therm: Add force-pullup option for "broken" sensors w1: ds2482: Added 1-Wire pull-up support to the driver vme: add missing put_device() after device_register() fails extcon: max8997: Use workqueue to check cable state after completing boot of platform extcon: max8997: Set default UART/USB path on probe extcon: max8997: Consolidate duplicate code for checking ADC/CHG cable type extcon: max8997: Set default of ADC debounce time during initialization extcon: max8997: Remove duplicate code related to set H/W line path extcon: max8997: Move defined constant to header file extcon: max77693: Make max77693_extcon_cable static extcon: max8997: Remove unreachable code extcon: max8997: Make max8997_extcon_cable static extcon: max77693: Remove unnecessary goto statement to improve readability extcon: max77693: Convert to devm_input_allocate_device() extcon: gpio: Rename filename of extcon-gpio.c according to kernel naming style CREDITS: update email and address of Harald Hoyer extcon: arizona: Use MICDET for final microphone identification extcon: arizona: Always take the first HPDET reading as the final one extcon: arizona: Clear _trig_sts bits after jack detection extcon: arizona: Don't HPDET magic when headphones are enabled ...
| * | pcmcia: synclink_cs: cleanup checkpatch warningsAlexey Khoroshilov2013-02-081-306/+310
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ERROR: open brace '{' following struct go on the same line ERROR: space required after that ',' ERROR: space prohibited after that open parenthesis '(' WARNING: please, no spaces at the start of a line WARNING: please, no space before tabs Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | pcmcia: synclink_cs: fix error handling in mgslpc_probe()Alexey Khoroshilov2013-02-081-10/+41
| |/ | | | | | | | | | | | | | | | | | | | | | | | | mgslpc_probe() ignores errors in mgslpc_add_device() and does not release all resource if mgslpc_config() failed. The patch adds returned code to mgslpc_add_device() and fixes the both issues. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | TTY: synclink: Convert + to | for bit operationsJoe Perches2013-01-301-13/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Dan Carpenter noticed a missing set of parentheses around a multiple field addition. https://lkml.org/lkml/2013/1/27/166 His original commit message: There is a kind of precedence problem here, but it doesn't affect how the code works because ->serial_signals is unsigned char. We want to clear two flags here. #define SerialSignal_RTS 0x20 /* Request to Send */ #define SerialSignal_DTR 0x80 /* Data Terminal Ready */ Without the parenthesis then it does: info->serial_signals &= 0x5f; With the parenthesis it does: info->serial_signals &= 0xffffff5f; info->serial_signals is an unsigned char so the two statements are equivalent, but it's cleaner to add the parenthesis. In other dtr_rts() functions the parenthesis are there so this makes it more consistent. Other changes: Convert all + uses to | for these bit operations. Reorder the multiple fields for consistency. Update the comments too. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | tty: Added a CONFIG_TTY option to allow removal of TTYJoe Millenbach2013-01-191-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The option allows you to remove TTY and compile without errors. This saves space on systems that won't support TTY interfaces anyway. bloat-o-meter output is below. The bulk of this patch consists of Kconfig changes adding "depends on TTY" to various serial devices and similar drivers that require the TTY layer. Ideally, these dependencies would occur on a common intermediate symbol such as SERIO, but most drivers "select SERIO" rather than "depends on SERIO", and "select" does not respect dependencies. bloat-o-meter output comparing our previous minimal to new minimal by removing TTY. The list is filtered to not show removed entries with awk '$3 != "-"' as the list was very long. add/remove: 0/226 grow/shrink: 2/14 up/down: 6/-35356 (-35350) function old new delta chr_dev_init 166 170 +4 allow_signal 80 82 +2 static.__warned 143 142 -1 disallow_signal 63 62 -1 __set_special_pids 95 94 -1 unregister_console 126 121 -5 start_kernel 546 541 -5 register_console 593 588 -5 copy_from_user 45 40 -5 sys_setsid 128 120 -8 sys_vhangup 32 19 -13 do_exit 1543 1526 -17 bitmap_zero 60 40 -20 arch_local_irq_save 137 117 -20 release_task 674 652 -22 static.spin_unlock_irqrestore 308 260 -48 Signed-off-by: Joe Millenbach <jmillenbach@gmail.com> Reviewed-by: Jamey Sharp <jamey@minilop.net> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | TTY: synclink, remove unneeded testsJiri Slaby2013-01-161-3/+0Star
| | | | | | | | | | | | | | | | info in synclink bottom-halves cannot be NULL because it is taken from work_struct using container_of. Remove the tests. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | TTY: switch tty_flip_buffer_pushJiri Slaby2013-01-161-11/+3Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now, we start converting tty buffer functions to actually use tty_port. This will allow us to get rid of the need of tty in many call sites. Only tty_port will needed and hence no more tty_port_tty_get in those paths. Now, the one where most of tty_port_tty_get gets removed: tty_flip_buffer_push. IOW we also closed all the races in drivers not using tty_port_tty_get at all yet. Also we move tty_flip_buffer_push declaration from include/linux/tty.h to include/linux/tty_flip.h to all others while we are changing it anyway. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | TTY: move low_latency to tty_portJiri Slaby2013-01-161-1/+1
| | | | | | | | | | | | | | | | | | | | One point is to have less places where we actually need tty pointer. The other is that low_latency is bound to buffer processing and buffers are now in tty_port. So it makes sense to move low_latency to tty_port too. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | TTY: switch tty_insert_flip_charJiri Slaby2013-01-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Now, we start converting tty buffer functions to actually use tty_port. This will allow us to get rid of the need of tty in many call sites. Only tty_port will needed and hence no more tty_port_tty_get in those paths. tty_insert_flip_char is the next one to proceed. This one is used all over the code, so the patch is huge. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | TTY: switch tty_buffer_request_room to tty_portJiri Slaby2013-01-161-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | Now, we start converting tty buffer functions to actually use tty_port. This will allow us to get rid of the need of tty pointer in many call sites. Only tty_port will be needed and hence no more tty_port_tty_get calls in those paths. Here we start with tty_buffer_request_room. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | synclink fix ldisc buffer argumentPaul Fulghum2013-01-161-1/+11
|/ | | | | | | | | | | Fix call to line discipline receive_buf by synclink drivers. Dummy flag buffer argument is ignored by N_HDLC line discipline but might be of insufficient size if accessed by a different line discipline selected by mistake. flag buffer allocation now matches max size of data buffer. Unused char_buf buffers are removed. Signed-off-by: Paul Fulghum <paulkf@microgate.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* TTY: call tty_port_destroy in the rest of driversJiri Slaby2012-11-161-1/+4
| | | | | | | | | | | | | | | | After commit "TTY: move tty buffers to tty_port", the tty buffers are not freed in some drivers. This is because tty_port_destructor is not called whenever a tty_port is freed. This was an assumption I counted with but was unfortunately untrue. So fix the drivers to fulfil this assumption. To be sure, the TTY buffers (and later some stuff) are gone along with the tty_port, we have to call tty_port_destroy at tear-down places. This is mostly where the structure containing a tty_port is freed. This patch does exactly that -- put tty_port_destroy at those places. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds2012-10-011-71/+60Star
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull TTY changes from Greg Kroah-Hartman: "As we skipped the merge window for 3.6-rc1 for the tty tree, everything is now settled down and working properly, so we are ready for 3.7-rc1. Here's the patchset, it's big, but the large changes are removing a firmware file and adding a staging tty driver (it depended on the tty core changes, so it's going through this tree instead of the staging tree.) All of these patches have been in the linux-next tree for a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" Fix up more-or-less trivial conflicts in - drivers/char/pcmcia/synclink_cs.c: tty NULL dereference fix vs tty_port_cts_enabled() helper function - drivers/staging/{Kconfig,Makefile}: add-add conflict (dgrp driver added close to other staging drivers) - drivers/staging/ipack/devices/ipoctal.c: "split ipoctal_channel from iopctal" vs "TTY: use tty_port_register_device" * tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (235 commits) tty/serial: Add kgdb_nmi driver tty/serial/amba-pl011: Quiesce interrupts in poll_get_char tty/serial/amba-pl011: Implement poll_init callback tty/serial/core: Introduce poll_init callback kdb: Turn KGDB_KDB=n stubs into static inlines kdb: Implement disable_nmi command kernel/debug: Mask KGDB NMI upon entry serial: pl011: handle corruption at high clock speeds serial: sccnxp: Make 'default' choice in switch last serial: sccnxp: Remove mask termios caps for SW flow control serial: sccnxp: Report actual baudrate back to core serial: samsung: Add poll_get_char & poll_put_char Powerpc 8xx CPM_UART setting MAXIDL register proportionaly to baud rate Powerpc 8xx CPM_UART maxidl should not depend on fifo size Powerpc 8xx CPM_UART too many interrupts Powerpc 8xx CPM_UART desynchronisation serial: set correct baud_base for EXSYS EX-41092 Dual 16950 serial: omap: fix the reciever line error case 8250: blacklist Winbond CIR port 8250_pnp: do pnp probe before legacy probe ...
| * serial: add a new helper functionHuang Shijie2012-09-051-1/+1
| | | | | | | | | | | | | | | | | | | | In most of the time, the driver needs to check if the cts flow control is enabled. But now, the driver checks the ASYNC_CTS_FLOW flag manually, which is not a grace way. So add a new wraper function to make the code tidy and clean. Signed-off-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * TTY: tty_alloc_driver() returns error pointersDan Carpenter2012-08-161-2/+2
| | | | | | | | | | | | | | | | | | We changed these from alloc_tty_driver() to tty_alloc_driver() so the error handling needs to modified to check for IS_ERR() instead of NULL. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * TTY: synclink_cs, fix buildJiri Slaby2012-08-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit "TTY: synclink_cs, use dynamic tty devices" added a call to tty_port_register_device with a proper device as the last argument. But it was not correct and it causes build failures: synclink_cs.c: In function ‘mgslpc_add_device’: synclink_cs.c:2735:16: error: request for member ‘dev’ in something not a structure or union info->p_dev is a pointer, so act as that. I wonder why my build scripts did not notice. I have to re-check them. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * TTY: synclink_cs, final cleanup in synclink_cs_initJiri Slaby2012-08-141-33/+32Star
| | | | | | | | | | | | | | | | | | | | * use <tab> for indentation * add KERN_* to printks * no more assignments in if's like if ((rc = function())) Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * TTY: synclink_cs, use dynamic tty devicesJiri Slaby2012-08-141-12/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | This allows us to provide the tty layer with information about tty_port for each link. And it also allows us to get rid of the remove_device loop in synclink_cs_exit because we had to reorder pcmcia and tty driver registration in init. This was because we need to have serial_driver initialized when calling tty_port_register_device from pcmcia ->probe. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * TTY: synclink_cs, sanitize fail pathsJiri Slaby2012-08-141-27/+14Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We will need to change the order of tty and pcmcia drivers initializations (see the reason later in this series). And the fail path handling is currently performed in a separate function that as well takes care of proper deinitialization in module_exit. It is hard to read and will need to be adjusted by our changes anyway. Instead, get rid of this helper function and do the fail paths handling directly in the init function. (And move the body of the function to module_exit.) Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * pcmcia,synclink_cs: fix termios port I missedAlan Cox2012-07-201-12/+12
| | | | | | | | | | Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | pcmcia: synclink_cs: fix potential tty NULL dereferenceAlexey Khoroshilov2012-09-261-7/+13
|/ | | | | | | | | | | | | | | | tty_port_tty_get() can return NULL after port hangup that may happen anytime. The patch adds checks that tty_port_tty_get() returns nonNULL around places where tty is actually used. I have no actual hardware to test the patch, so I have updated rx side processing from common sense only. v2: rx handling updated according Alan Cox feedback. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Remove all #inclusions of asm/system.hDavid Howells2012-03-281-1/+0Star
| | | | | | | | | Remove all #inclusions of asm/system.h preparatory to splitting and killing it. Performed with the following command: perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *` Signed-off-by: David Howells <dhowells@redhat.com>
* TTY: remove unneeded tty->index checksJiri Slaby2012-03-081-1/+1
| | | | | | | | | | | | | Checking if tty->index is in bounds is not needed. The tty has the index set in the initial open. This is done in get_tty_driver. And it can be only in interval <0,driver->num). So remove the tests which check exactly this interval. Some are left untouched as they check against the current backing device count. (Leaving apart that the check is racy in most of the cases.) Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* TTY: remove re-assignments to tty_driver membersJiri Slaby2012-03-081-1/+0Star
| | | | | | | | | | | | | | All num, magic and owner are set by alloc_tty_driver. No need to re-set them on each allocation site. pti driver sets something different to what it passes to alloc_tty_driver. It is not a bug, since we don't use the lines parameter in any way. Anyway this is fixed, and now we do the right thing. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* module_param: make bool parameters really bool (drivers & misc)Rusty Russell2012-01-131-1/+1
| | | | | | | | | | | | module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
* pcmcia: Convert pcmcia_device_id declarations to constJoe Perches2011-05-063-3/+3
| | | | | | | | | | | | | Saves about 50KB of data. Old/new size of all objects: text data bss dec hex filename 563015 80096 130684 773795 bcea3 (TOTALS) 610916 32256 130632 773804 bceac (TOTALS) Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be> (for drivers/net/can/softing/softing_cs.c) Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
* Fix common misspellingsLucas De Marchi2011-03-312-3/+3
| | | | | | Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
* Merge branch 'tty-next' of ↵Linus Torvalds2011-03-1612-3653/+6Star
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6 * 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (76 commits) pch_uart: reference clock on CM-iTC pch_phub: add new device ML7213 n_gsm: fix UIH control byte : P bit should be 0 n_gsm: add a documentation serial: msm_serial_hs: Add MSM high speed UART driver tty_audit: fix tty_audit_add_data live lock on audit disabled tty: move cd1865.h to drivers/staging/tty/ Staging: tty: fix build with epca.c driver pcmcia: synclink_cs: fix prototype for mgslpc_ioctl() Staging: generic_serial: fix double locking bug nozomi: don't use flush_scheduled_work() tty/serial: Relax the device_type restriction from of_serial MAINTAINERS: Update HVC file patterns tty: phase out of ioctl file pointer for tty3270 as well tty: forgot to remove ipwireless from drivers/char/pcmcia/Makefile pch_uart: Fix DMA channel miss-setting issue. pch_uart: fix exclusive access issue pch_uart: fix auto flow control miss-setting issue pch_uart: fix uart clock setting issue pch_uart : Use dev_xxx not pr_xxx ... Fix up trivial conflicts in drivers/misc/pch_phub.c (same patch applied twice, then changes to the same area in one branch)
| * pcmcia: synclink_cs: fix prototype for mgslpc_ioctl()Axel Lin2011-03-011-2/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | | | The ioctl file pointer was removed in commit 6caa76 "tty: now phase out the ioctl file pointer for good". Thus fix the prototype for mgslpc_ioctl() and eliminate below warning: CC [M] drivers/char/pcmcia/synclink_cs.o drivers/char/pcmcia/synclink_cs.c:2787: warning: initialization from incompatible pointer type Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * tty: forgot to remove ipwireless from drivers/char/pcmcia/MakefileGreg Kroah-Hartman2011-02-251-2/+0Star
| | | | | | | | | | | | | | | | This caused a build error. Many thanks to Stephen Rothwell for pointing this mistake out. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * tty: move ipwireless driver from drivers/char/pcmcia/ to drivers/tty/Greg Kroah-Hartman2011-02-2310-3632/+0Star
| | | | | | | | | | | | | | | | | | | | | | As planned by Arnd Bergmann, this moves the ipwireless driver to the drivers/tty/ directory as that's where it really belongs. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Jiri Slaby <jslaby@suse.cz> Cc: David Sterba <dsterba@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * tty: now phase out the ioctl file pointer for goodAlan Cox2011-02-171-2/+2
| | | | | | | | | | | | | | | | | | Only oddities here are a couple of drivers that bogusly called the ldisc helpers instead of returning -ENOIOCTLCMD. Fix the bug and the rest goes away. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * tiocmset: kill the file pointer argumentAlan Cox2011-02-172-4/+4
| | | | | | | | | | | | | | | | Doing tiocmget was such fun we should do tiocmset as well for the same reasons Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * tiocmget: kill off the passing of the struct fileAlan Cox2011-02-172-3/+3
| | | | | | | | | | | | | | | | | | | | We don't actually need this and it causes problems for internal use of this functionality. Currently there is a single use of the FILE * pointer. That is the serial core which uses it to check tty_hung_up_p. However if that is true then IO_ERROR is also already set so the check may be removed. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | cm4000_cs: Fix undefined ops warningAlan Cox2011-02-191-2/+1Star
| | | | | | | | | | Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
* | drivers/char/pcmcia/ipwireless/main.c: Convert release_resource to ↵Julia Lawall2011-02-191-20/+32
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | release_region/release_mem_region Request_region should be used with release_region, not release_resource. This patch contains a number of changes, related to calls to request_region, request_mem_region, and the associated error handling code. 1. For the call to request_region, the variable io_resource storing the result is dropped. The call to release_resource at the end of the function is changed to a call to release_region with the first two arguments of request_region as its arguments. The same call to release_region is also added to release_ipwireless. 2. The first call to request_mem_region is now tested and ret is set to -EBUSY if the the call has failed. This call was associated with the initialization of ipw->attr_memory. But the error handling code was testing ipw->common_memory. The definition of release_ipwireless also suggests that this call should be associated with ipw->common_memory, not ipw->attr_memory. 3. The second call to request_mem_region is now tested and ret is set to -EBUSY if the the call has failed. 4. The various gotos to the error handling code is adjusted so that there is no need for ifs. 5. Return the value stored in the ret variable rather than -1. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x,E; @@ ( *x = request_region(...) | *x = request_mem_region(...) ) ... when != release_region(x) when != x = E * release_resource(x); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
* pcmcia/ipwireless: don't use flush_scheduled_work()Tejun Heo2010-12-243-3/+4
| | | | | | | | | flush_scheduled_work() is deprecated and scheduled to be removed. Directly flush the used works instead. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: David Sterba <dsterba@suse.cz>
* pcmcia: fix warning in synclink driverAndres Salomon2010-11-101-0/+1
| | | | | | | | | | | | | During builds I see the following warning - CC [M] drivers/char/pcmcia/synclink_cs.o drivers/char/pcmcia/synclink_cs.c:2194: warning: ‘mgslpc_get_icount’ defined but not used The function is a callback meant to be assigned to get_icount (added during 0587102cf). Fix accordingly. Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-23 04:59:36 +0200