summaryrefslogtreecommitdiffstats
path: root/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
Commit message (Collapse)AuthorAgeFilesLines
* clk: Remove io.h from clk-provider.hStephen Boyd2019-05-151-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that we've gotten rid of clk_readl() we can remove io.h from the clk-provider header and push out the io.h include to any code that isn't already including the io.h header but using things like readl/writel, etc. Found with this grep: git grep -l clk-provider.h | grep '.c$' | xargs git grep -L 'linux/io.h' | \ xargs git grep -l \ -e '\<__iowrite32_copy\>' --or \ -e '\<__ioread32_copy\>' --or \ -e '\<__iowrite64_copy\>' --or \ -e '\<ioremap_page_range\>' --or \ -e '\<ioremap_huge_init\>' --or \ -e '\<arch_ioremap_pud_supported\>' --or \ -e '\<arch_ioremap_pmd_supported\>' --or \ -e '\<devm_ioport_map\>' --or \ -e '\<devm_ioport_unmap\>' --or \ -e '\<IOMEM_ERR_PTR\>' --or \ -e '\<devm_ioremap\>' --or \ -e '\<devm_ioremap_nocache\>' --or \ -e '\<devm_ioremap_wc\>' --or \ -e '\<devm_iounmap\>' --or \ -e '\<devm_ioremap_release\>' --or \ -e '\<devm_memremap\>' --or \ -e '\<devm_memunmap\>' --or \ -e '\<__devm_memremap_pages\>' --or \ -e '\<pci_remap_cfgspace\>' --or \ -e '\<arch_has_dev_port\>' --or \ -e '\<arch_phys_wc_add\>' --or \ -e '\<arch_phys_wc_del\>' --or \ -e '\<memremap\>' --or \ -e '\<memunmap\>' --or \ -e '\<arch_io_reserve_memtype_wc\>' --or \ -e '\<arch_io_free_memtype_wc\>' --or \ -e '\<__io_aw\>' --or \ -e '\<__io_pbw\>' --or \ -e '\<__io_paw\>' --or \ -e '\<__io_pbr\>' --or \ -e '\<__io_par\>' --or \ -e '\<__raw_readb\>' --or \ -e '\<__raw_readw\>' --or \ -e '\<__raw_readl\>' --or \ -e '\<__raw_readq\>' --or \ -e '\<__raw_writeb\>' --or \ -e '\<__raw_writew\>' --or \ -e '\<__raw_writel\>' --or \ -e '\<__raw_writeq\>' --or \ -e '\<readb\>' --or \ -e '\<readw\>' --or \ -e '\<readl\>' --or \ -e '\<readq\>' --or \ -e '\<writeb\>' --or \ -e '\<writew\>' --or \ -e '\<writel\>' --or \ -e '\<writeq\>' --or \ -e '\<readb_relaxed\>' --or \ -e '\<readw_relaxed\>' --or \ -e '\<readl_relaxed\>' --or \ -e '\<readq_relaxed\>' --or \ -e '\<writeb_relaxed\>' --or \ -e '\<writew_relaxed\>' --or \ -e '\<writel_relaxed\>' --or \ -e '\<writeq_relaxed\>' --or \ -e '\<readsb\>' --or \ -e '\<readsw\>' --or \ -e '\<readsl\>' --or \ -e '\<readsq\>' --or \ -e '\<writesb\>' --or \ -e '\<writesw\>' --or \ -e '\<writesl\>' --or \ -e '\<writesq\>' --or \ -e '\<inb\>' --or \ -e '\<inw\>' --or \ -e '\<inl\>' --or \ -e '\<outb\>' --or \ -e '\<outw\>' --or \ -e '\<outl\>' --or \ -e '\<inb_p\>' --or \ -e '\<inw_p\>' --or \ -e '\<inl_p\>' --or \ -e '\<outb_p\>' --or \ -e '\<outw_p\>' --or \ -e '\<outl_p\>' --or \ -e '\<insb\>' --or \ -e '\<insw\>' --or \ -e '\<insl\>' --or \ -e '\<outsb\>' --or \ -e '\<outsw\>' --or \ -e '\<outsl\>' --or \ -e '\<insb_p\>' --or \ -e '\<insw_p\>' --or \ -e '\<insl_p\>' --or \ -e '\<outsb_p\>' --or \ -e '\<outsw_p\>' --or \ -e '\<outsl_p\>' --or \ -e '\<ioread8\>' --or \ -e '\<ioread16\>' --or \ -e '\<ioread32\>' --or \ -e '\<ioread64\>' --or \ -e '\<iowrite8\>' --or \ -e '\<iowrite16\>' --or \ -e '\<iowrite32\>' --or \ -e '\<iowrite64\>' --or \ -e '\<ioread16be\>' --or \ -e '\<ioread32be\>' --or \ -e '\<ioread64be\>' --or \ -e '\<iowrite16be\>' --or \ -e '\<iowrite32be\>' --or \ -e '\<iowrite64be\>' --or \ -e '\<ioread8_rep\>' --or \ -e '\<ioread16_rep\>' --or \ -e '\<ioread32_rep\>' --or \ -e '\<ioread64_rep\>' --or \ -e '\<iowrite8_rep\>' --or \ -e '\<iowrite16_rep\>' --or \ -e '\<iowrite32_rep\>' --or \ -e '\<iowrite64_rep\>' --or \ -e '\<__io_virt\>' --or \ -e '\<pci_iounmap\>' --or \ -e '\<virt_to_phys\>' --or \ -e '\<phys_to_virt\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap\>' --or \ -e '\<__ioremap\>' --or \ -e '\<iounmap\>' --or \ -e '\<ioremap\>' --or \ -e '\<ioremap_nocache\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wt\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<xlate_dev_kmem_ptr\>' --or \ -e '\<xlate_dev_mem_ptr\>' --or \ -e '\<unxlate_dev_mem_ptr\>' --or \ -e '\<virt_to_bus\>' --or \ -e '\<bus_to_virt\>' --or \ -e '\<memset_io\>' --or \ -e '\<memcpy_fromio\>' --or \ -e '\<memcpy_toio\>' I also reordered a couple includes when they weren't alphabetical and removed clk.h from kona, replacing it with clk-provider.h because that driver doesn't use clk consumer APIs. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Tero Kristo <t-kristo@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Cc: Chris Zankel <chris@zankel.net> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: John Crispin <john@phrozen.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk: sunxi-ng: h6: Allow video & vpu clocks to change parent rateJernej Skrabec2019-04-041-3/+3
| | | | | | | | | | | | | | Video related clocks need to set rate as close as possible to the requested one, so they should be able to change parent clock rate. When processing 4K video, VPU clock has to be set to higher rate than it is default parent rate. Because of that, VPU clock should be able to change parent clock rate. Add CLK_SET_RATE_PARENT flag to tcon-lcd0, tcon-tv0 and ve. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
* clk: sunxi-ng: h6: Preset hdmi-cec clock parentJernej Skrabec2019-04-031-0/+11
| | | | | | | | | | | | | | | | | | H6 manual and BSP clock driver both states that hdmi-cec clock has two possible parents, osc32k and pll-periph0-2x with 36621 predivider. Because pll-periph0-2x is always 1.2 GHz, both parents give same hdmi-cec rate - 32768 Hz, which is exactly the rate needed for HDMI CEC controller to operate correctly. However, for some reason, HDMI CEC controller doesn't work if default parent (osc32k) is used. BSP HDMI driver also always use pll-periph0-2x as hdmi-cec clock parent. In order to solve the issue, preset hdmi-cec clock parent to pll-periph0-2x. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
* clk: sunxi-ng: Allow DE clock to set parent rateJernej Skrabec2019-03-181-1/+1
| | | | | | | | | | | | DE2/DE3 mixers have to run at specific frequency in order to work optimally. This wasn't actually possible for some SoCs because "de" clock wasn't allowed to adjust parent rate. Add CLK_SET_RATE_PARENT flag to all "de" clocks which didn't have it yet. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
* clk: sunxi-ng: h6: Set video PLLs limitsJernej Skrabec2018-11-051-0/+4
| | | | | | | | | | | | | Video PLL factors can be set in a way that final PLL rate is outside stable range. H6 user manual specifically says that N factor should not be below 12. While it doesn't says anything about maximum stable rate, it is clear that PLL doesn't work at 6.096 GHz (254 * 24 MHz). Set minimum allowed PLL video rate to 288 MHz (12 * 24 MHz) and maximum to 2.4 GHz, which is maximum in BSP driver. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
* clk: sunxi-ng: sun50i: h6: Fix MMC clock mux widthJagan Teki2018-11-051-3/+3
| | | | | | | | | MUX bits for MMC clock register range are 25:24 where 24 is shift and 2 is width So fix the width number from 3 to 2. Fixes: 524353ea480b ("clk: sunxi-ng: add support for the Allwinner H6 CCU") Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
* clk: sunxi-ng: sun50i: h6: Add 2x fixed post-divider to MMC module clocksIcenowy Zheng2018-09-051-20/+23
| | | | | | | | | | | | | | | | | On the H6, the MMC module clocks are fixed in the new timing mode, i.e. they do not have a bit to select the mode. These clocks have a 2x divider somewhere between the clock and the MMC module. To be consistent with other SoCs supporting the new timing mode, we model the 2x divider as a fixed post-divider on the MMC module clocks. This patch adds the post-dividers to the MMC clocks, following the approach on A64. Fixes: 524353ea480b ("clk: sunxi-ng: add support for the Allwinner H6 CCU") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
* clk: sunxi-ng: h6: fix PWM gate/reset offsetRongyi Chen2018-08-271-1/+1
| | | | | | | | | | | | | Currently the register offset of the PWM bus gate in Allwinner H6 clock driver is wrong. Fix this issue. Fixes: 542353ea ("clk: sunxi-ng: add support for the Allwinner H6 CCU") Signed-off-by: Rongyi Chen <chenyi@tt-cool.com> [Icenowy: refactor commit message] Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
* clk: sunxi-ng: h6: fix bus clocks' divider positionIcenowy Zheng2018-08-271-4/+4
| | | | | | | | | | | | | The bus clocks (AHB/APB) on Allwinner H6 have their second divider start at bit 8, according to the user manual and the BSP code. However, currently the divider offset is incorrectly set to 16, thus the divider is not correctly read and the clock frequency is not correctly calculated. Fix this bit offset on all affected bus clocks in ccu-sun50i-h6. Cc: stable@vger.kernel.org # v4.17.y Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
* clk: sunxi-ng: add missing hdmi-slow clock for H6 CCUIcenowy Zheng2018-03-211-0/+4
| | | | | | | | | | | The Allwinner H6 CCU has a "HDMI Slow Clock", which is currently missing in the ccu-sun50i-h6 driver. Add this missing clock to the driver. Fixes: 542353ea ("clk: sunxi-ng: add support for the Allwinner H6 CCU") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
* clk: sunxi-ng: add support for the Allwinner H6 CCUIcenowy Zheng2018-03-181-0/+1207
The Allwinner H6 SoC has a CCU which has been largely rearranged. Add support for it in the sunxi-ng CCU framework. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-22 14:04:48 +0200