summaryrefslogtreecommitdiffstats
path: root/drivers/gpio/Kconfig
Commit message (Collapse)AuthorAgeFilesLines
* gpio: thunderx: select IRQ_DOMAIN_HIERARCHY instead of depends onMasahiro Yamada2017-09-191-1/+2
| | | | | | | | | | | | | IRQ_DOMAIN_HIERARCHY is not user-configurable, but supposed to be selected by drivers that need IRQ domain hierarchy support. GPIO_THUNDERX is the only user of "depends on IRQ_DOMAIN_HIERARCHY". This means, we can not enable GPIO_THUNDERX unless other drivers select IRQ_DOMAIN_HIERARCHY elsewhere. This is odd. Flip the logic. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: David Daney <david.daney@cavium.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: Add gpio driver support for ThunderX and OCTEON-TXDavid Daney2017-08-221-0/+9
| | | | | | | | Cavium ThunderX and OCTEON-TX are arm64 based SoCs. Add driver for the on-chip GPIO pins. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: mockup: use irq_simBartosz Golaszewski2017-08-211-1/+1
| | | | | | | | | Shrink the driver by removing the code dealing with dummy interrupts and replacing it with calls to the irq_sim API. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: Add support for TPS68470 GPIOsRajmohan Mani2017-08-141-0/+15
| | | | | | | | | | | | | | | | This patch adds support for TPS68470 GPIOs. There are 7 GPIOs and a few sensor related GPIOs. These GPIOs can be requested and configured as appropriate. The GPIOs are also provided with descriptive names. However, the typical use case is that the OS GPIO driver will interact with TPS68470 GPIO driver to configure these GPIOs, as requested by the platform firmware. Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: xgene-sb: select IRQ_DOMAIN_HIERARCHYMasahiro Yamada2017-08-011-0/+1
| | | | | | | | This driver calls irq_domain_hierarchy() and irq_chip_*_parent(). They are available only when CONFIG_IRQ_DOMAIN_HIERARCHY is enabled. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Merge tag 'gpio-v4.13-1' of ↵Linus Torvalds2017-07-071-3/+21
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.13 series. Some administrativa: I have a slew of 8250 serial patches and the new IOT2040 serial+GPIO driver coming in through this tree, along with a whole bunch of Exar 8250 fixes. These are ACKed by Greg and also hit drivers/platform/* where they are ACKed by Andy Shevchenko. Speaking about drivers/platform/* there is also a bunch of ACPI stuff coming through that route, again ACKed by Andy. The MCP23S08 changes are coming in here as well. You already have the commits in your tree, so this is just a result of sharing an immutable branch between pin control and GPIO. Core: - Export add/remove for lookup tables so that modules can export GPIO descriptor tables. - Handle GPIO sleep states: it is now possible to flag that a GPIO line may loose its state during suspend/resume of the system to save power. This is used in the Wolfson Micro Arizona driver. - ACPI-based GPIO was tightened up a lot around the edges. - Use bitmap_fill() to speed up a loop. New drivers: - Exar XRA1403 SPI-based GPIO. - MVEBU driver now supports Armada 7K and 8K. - LP87565 PMIC GPIO. - Renesas R-CAR R8A7743 (RZ/G1M). - The new IOT2040 8250 serial/GPIO also comes in through this changeset. Substantial driver changes: - Seriously fix the Exar 8250 GPIO portions to work. - The MCP23S08 was moved out to a pin control driver. - Convert MEVEBU to use regmap for register access. - Drop Vulcan support from the Broadcom driver. - Serious cleanup and improvement of the mockup driver, giving us a better test coverage. Misc: - Lots of janitorial clean up. - A bunch of documentation fixes" * tag 'gpio-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (70 commits) serial: exar: Add support for IOT2040 device gpio-exar/8250-exar: Make set of exported GPIOs configurable platform: Accept const properties serial: exar: Factor out platform hooks gpio-exar/8250-exar: Rearrange gpiochip parenthood gpio: exar: Fix iomap request gpio-exar/8250-exar: Do not even instantiate a GPIO device for Commtech cards serial: uapi: Add support for bus termination gpio: rcar: Add R8A7743 (RZ/G1M) support gpio: gpio-wcove: Fix GPIO control register offset calculation gpio: lp87565: Add support for GPIO gpio: dwapb: fix missing first irq for edgeboth irq type MAINTAINERS: Take maintainership for GPIO ACPI support gpio: exar: Fix reading of directions and values gpio: exar: Allocate resources on behalf of the platform device gpio-exar/8250-exar: Fix passing in of parent PCI device gpio: mockup: use devm_kcalloc() where applicable gpio: mockup: add myself as author gpio: mockup: improve the error message gpio: mockup: don't return magic numbers from probe() ...
| * gpio: lp87565: Add support for GPIOKeerthy2017-06-211-0/+10
| | | | | | | | | | | | | | | | Add driver for lp87565 PMIC family GPIOs. Three GPIOs are supported and can be configured in Open-drain output or Push-pull output. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * gpio: xra1403: select REGMAP_SPIArnd Bergmann2017-05-311-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Without the regmap code, we get a link error: drivers/gpio/built-in.o: In function `xra1403_probe': (.text+0x132e0): undefined reference to `__devm_regmap_init_spi' Fixes: 5704520d7880 ("gpio: xra1403: Add EXAR XRA1403 SPI GPIO expander driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nandor Han <nandor.han@ge.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * gpio: mvebu: Select REGMAP_MMIO now that regmap is usedGregory CLEMENT2017-05-291-0/+1
| | | | | | | | | | | | | | | | | | | | Since the commit "gpio: mvebu: switch to regmap for register access" the driver use the regmap. Explicitly select the REGMAP_MMIO symbol to fix build error. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * gpio: xlp: update GPIO_XLP dependencyJayachandran C2017-05-231-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | Broadcom Vulcan (ARCH_VULCAN) has been discontinued and will be deleted soon. So, update the GPIO_XLP Kconfig entry to remove the ARCH_VULCAN dependency. Also update the documentation to note that Cavium ThunderX2 uses this driver. Signed-off-by: Jayachandran C <jnair@caviumnetworks.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * gpio: mvebu: allow building driver for Armada 7K/8KGregory CLEMENT2017-05-231-1/+1
| | | | | | | | | | | | | | | | | | | | The mvebu gpio driver can also be used on arm64 mvebu SoC such as the Armada 7K/8K. This commit allows to build the driver for them (when only ARCH_MVEBU is defined) Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * Merge branch 'mcp23s08' of /home/linus/linux-pinctrl into develLinus Walleij2017-05-231-17/+0Star
| |\
| * | gpio: xra1403: Add EXAR XRA1403 SPI GPIO expander driverNandor Han2017-05-221-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This driver support basic XRA1403 functionalities: - set gpio direction - get gpio direction - set gpio high/low - get gpio status Signed-off-by: Nandor Han <nandor.han@ge.com> Signed-off-by: Semi Malinen <semi.malinen@ge.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | | gpio/pinctrl: ingenic: depend on OFLinus Walleij2017-05-291-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Fix compile errors due to missing OF. Cc: Paul Cercueil <paul@crapouillou.net> Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | | Merge branch 'mcp23s08' into develLinus Walleij2017-05-231-17/+0Star
|\ \ \ | | |/ | |/|
| * | gpio: mcp23s08: move to pinctrlSebastian Reichel2017-05-231-17/+0Star
| |/ | | | | | | | | | | | | | | | | | | This moves the mcp23s08 driver from gpio to pinctrl. Actual pinctrl support for configuration of the pull-up resistors follows in its own patch. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* / gpio: Add gpio-ingenic driverPaul Cercueil2017-05-221-0/+10
|/ | | | | | | | This driver handles the GPIOs of all the Ingenic JZ47xx SoCs currently supported by the upsteam Linux kernel. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Merge tag 'gpio-v4.12-1' of ↵Linus Torvalds2017-05-041-18/+28
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.12 kernel cycle. Core changes: - Return NULL from gpiod_get_optional() when GPIOLIB is disabled. This was a much discussed change. It affects use cases where people write drivers that might or might not be using GPIO resources. I have decided that this is the lesser evil right now. - Make gpiod_count() behave consistently across different hardware descriptions. - Fix the syntax around open drain/open source to not infer active high/low semantics. New drivers: - A new single-register fixed-direction framework driver for hardware that have lines controlled by a single register that just work in one direction (out or in), including IRQ support. - Support the Fintek F71889A GPIO SuperIO controller. - Support the National NI 169445 MMIO GPIO. - Support for the X-Gene derivative of the DWC GPIO controller - Support for the Rohm BD9571MWV-M PMIC GPIO controller. - Refactor the Gemini GPIO driver to a generic Faraday FTGPIO driver and replace both the Gemini and the Moxa ART custom drivers with this driver. Driver improvements: - A whole slew of drivers have their spinlocks chaned to raw spinlocks as they provide irqchips, and thus we are progressing on realtime compliance. - Use devm_irq_alloc_descs() in a slew of drivers, getting managed resources. - Support for the embedded PWM controller inside the MVEBU driver. - Debounce, open source and open drain support for the Aspeed driver. - Misc smaller fixes like spelling and syntax and whatnot" * tag 'gpio-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (77 commits) gpio: f7188x: Add a missing break gpio: omap: return error if requested debounce time is not possible gpio: Add ROHM BD9571MWV-M PMIC GPIO driver gpio: gpio-wcove: fix GPIO IRQ status mask gpio: DT bindings, move tca9554 from pcf857x to pca953x gpio: move tca9554 from pcf857x to pca953x gpio: arizona: Correct check whether the pin is an input gpio: Add XRA1403 DTS binding documentation dt-bindings: add exar to vendor prefixes list gpio: gpio-wcove: fix irq pending status bit width gpio: dwapb: use dwapb_read instead of readl_relaxed gpio: aspeed: Add open-source and open-drain support gpio: aspeed: Add debounce support gpio: aspeed: dt: Add optional clocks property gpio: aspeed: dt: Fix description alignment in bindings document gpio: mvebu: Add limited PWM support gpio: Use unsigned int for interrupt numbers gpio: f7188x: Add F71889A GPIO support. gpio: core: Decouple open drain/source flag with active low/high gpio: arizona: Correct handling for reading input GPIOs ...
| * gpio: Add ROHM BD9571MWV-M PMIC GPIO driverMarek Vasut2017-04-281-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | Add driver for the GPIO block in the ROHM BD9571MWV-W MFD PMIC. This block is pretty trivial and supports setting GPIO direction as Input/Output and in case of Output, supports setting value. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: linux-gpio@vger.kernel.org Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * gpio: move tca9554 from pcf857x to pca953xAnders Darander2017-04-241-1/+1
| | | | | | | | | | | | | | | | | | | | The TCA9554 doesn't work with the pcf857x driver, trying to change the direction gives a NAK bailout error. TCA9554 is similar to the PCA9554, thus change the driver. Signed-off-by: Anders Darander <anders@chargestorm.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * gpio: add generic single-register fixed-direction GPIO driverRussell King2017-03-241-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a simple, generic, single register fixed-direction GPIO driver. This is able to support a single register with a mixture of inputs and outputs. This is different from gpio-mmio and gpio-74xx-mmio: * gpio-mmio doesn't allow a fixed direction, it assumes there is always a direction register. * gpio-74xx-mmio only supports all-in or all-out setups * gpio-74xx-mmio is DT only, this needs to support legacy too * they don't double-read when getting the GPIO value, as required by some implementations that this driver supports * we need to always do 32-bit reads, which bgpio doesn't guarantee * the current output state may not be readable from the hardware register - reading may reflect input status but not output status. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * gpio: moxart: Switch to using the FTGPIO010 driverLinus Walleij2017-03-221-9/+1Star
| | | | | | | | | | | | | | | | | | | | | | This just deletes the Moxa ART driver and replaces it with the more versatile Faraday FTGPIO010 driver. Make this default on for ARCH_GEMINI and ARCH_MOXART so we do not get Kconfig glitches. Tested-by: Jonas Jensen <jonas.jensen@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * gpio: gemini: rename to match Faraday IPLinus Walleij2017-03-221-3/+4
| | | | | | | | | | | | | | | | | | | | The Gemini driver is actually a driver for the Faraday Technology FTGPIO010 IP block. We rename the driver and the Kconfig symbol and put in a a new compatible string for the Moxa ART SoC that is also using this IP block. Tested-by: Jonas Jensen <jonas.jensen@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * gpio: xlp: Update for ARCH_THUNDER2Jayachandran C2017-03-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | ARCH_VULCAN arm64 platform (for Broadcom Vulcan ARM64 processors) has been discontinued. Cavium's ThunderX2 CN99XX (ARCH_THUNDER2) will be the next revision of this platform. Update compile dependencies and ACPI ID to reflect this change. Signed-off-by: Jayachandran C <jnair@caviumnetworks.com> [Drop depreciation of ARCH_VULCAN] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * gpio: pc104: Mask PC/104 drivers via PC104 Kconfig optionWilliam Breathitt Gray2017-03-151-4/+4
| | | | | | | | | | | | | | | | | | | | | | PC/104 drivers should be hidden on machines which do not support PC/104 devices. This patch adds the PC104 Kconfig option as a dependency for the relevant PC/104 device driver Kconfig options. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | mfd: intel_soc_pmic: Fix a mess with compilation unitsAndy Shevchenko2017-04-271-1/+1
|/ | | | | | | | | | | | | | | | | | | | Crystal Cove and Whiskey Cove are two different PMICs which are installed on Intel Atom SoC based platforms. Moreover there are two independent drivers that by some reason were supposed (*) to get into one kernel module. Fix the mess by clarifying Kconfig option for Crystal Cove and split Whiskey Cove out of it. (*) It looks like the configuration was never tested with INTEL_SOC_PMIC=n. The line in Makefile is actually wrong. Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> (supporter:ACPI) Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* gpio: mockup: add a dummy irqchipBartosz Golaszewski2017-02-131-0/+2
| | | | | | | | Setup a dummy irqchip that will allow us to inject line events for testing purposes. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: Add GPIO support for the ACCES PCI-IDIO-16William Breathitt Gray2017-02-061-0/+9
| | | | | | | | | | | | The ACCES PCI-IDIO-16 device provides 32 lines of digital I/O (16 lines of optically-isolated digital inputs for AC and DC control signals, and 16 lines of solid state switch digital outputs). An interrupt is generated when any of the inputs change state (low to high or high to low). Input filter control is not supported by this driver, and input filters are deactivated by this driver. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: mcp23s08: Select REGMAP/REGMAP_I2C to fix build errorAxel Lin2017-02-041-0/+2
| | | | | | | | | | This driver now using devm_regmap_init/devm_regmap_init_i2c, so it needs to select REGMAP/REGMAP_I2C accordingly. Fixes: ("3d84fdb3f0b5 gpio: mcp23s08: use regmap") Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-By: Sebastian Reichel <sre@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: exar: add gpio for exar cardsSudip Mukherjee2017-01-261-0/+7
| | | | | | | | | | Exar XR17V352/354/358 chips have 16 multi-purpose inputs/outputs which can be controlled using gpio interface. Add the gpio specific code. Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: Add a driver for Cortina Systems Gemini GPIOLinus Walleij2017-01-261-0/+9
| | | | | | | | | | | | | | | This is a heavy edit/rewrite of the GPIO driver for the Gemini SoC from arch/arm/mach-gemini/gpio.c. This rewrite uses all the best-in-class helper like generic GPIO and GPIOLIB_IRQCHIP and has been tested on ITian Square One Gemini-based NAS/router. Cc: Janos Laube <janos.dev@gmail.com> Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com> Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Merge tag 'gpio-v4.10-1' of ↵Linus Torvalds2016-12-131-14/+24
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Luinus Walleij: "Bulk GPIO changes for the v4.10 kernel cycle: Core changes: - Simplify threaded interrupt handling: instead of passing numbed parameters to gpiochip_irqchip_add_chained() we create a new call: gpiochip_irqchip_add_nested() so the two types are clearly semantically different. Also make sure that all nested chips call gpiochip_set_nested_irqchip() which is necessary for IRQ resend to work properly if it happens. - Return error on seek operations for the chardev. - Clamp values set as part of gpio[d]_direction_output() so that anything != 0 will be send down to the driver as "1" not the value passed in. - ACPI can now support naming of GPIO lines, hogs and holes in the GPIO lists. New drivers: - The SX150x driver was deemed unfit for the GPIO subsystem and was moved over to a combined GPIO+pinctrl driver in the pinctrl subsystem. New features: - Various cleanups to various drivers" * tag 'gpio-v4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (49 commits) gpio: merrifield: Implement gpio_get_direction callback gpio: merrifield: Add support for hardware debouncer gpio: chardev: Return error for seek operations gpio: arizona: Tidy up probe error path gpio: arizona: Remove pointless set of platform drvdata gpio: pl061: delete platform data handling gpio: pl061: move platform data into driver gpio: pl061: rename variable from chip to pl061 gpio: pl061: rename state container struct gpio: pl061: use local state for parent IRQ storage gpio: set explicit nesting on drivers gpio: simplify adding threaded interrupts gpio: vf610: use builtin_platform_driver gpio: axp209: use correct register for GPIO input status gpio: stmpe: fix interrupt handling bug gpio: em: depnd on ARCH_SHMOBILE gpio: zx: depend on ARCH_ZX gpio: x86: update config dependencies for x86 specific hardware gpio: mb86s7x: use builtin_platform_driver gpio: etraxfs: use builtin_platform_driver ...
| * gpio: em: depnd on ARCH_SHMOBILEPeter Robinson2016-11-241-1/+1
| | | | | | | | | | | | | | | | The GPIO_EM is part of the Renesas SoCs so depend on the arch. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> [Changed to depend on ARCH_EMEV2] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * gpio: zx: depend on ARCH_ZXPeter Robinson2016-11-221-0/+1
| | | | | | | | | | | | | | Set GPIO_ZX to depend on ARCH_ZX as it's SOC specific. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * gpio: x86: update config dependencies for x86 specific hardwarePeter Robinson2016-11-221-5/+8
| | | | | | | | | | | | | | The devices here are specific to x86 so lets depend on x86. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * Merge branch 'ib-sx150x' of /home/linus/linux-pinctrl into develLinus Walleij2016-10-241-8/+5Star
| |\
| | * pinctrl: Add SX150X GPIO Extender Pinctrl DriverNeil Armstrong2016-10-241-8/+5Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the I2C sx150x GPIO expander driver uses platform_data to manage the pins configurations, rewrite the driver as a pinctrl driver using pinconf to get/set pin configurations from DT or debugfs. The pinctrl driver is functionnally equivalent as the gpio-only driver and can use DT for pinconf. The platform_data confirmation is dropped. This patchset removed the gpio-only driver and selects the Pinctrl driver config instead. This patchset also migrates the gpio dt-bindings to pinctrl and add the pinctrl optional properties. The driver was tested with a SX1509 device on a BeagleBone black with interrupt support and on an X86_64 machine over an I2C to USB converter. This is a fixed version that builds and runs on non-OF platforms and on arm based OF. The GPIO version is removed and the bindings are also moved to the pinctrl bindings. Changes since v2 - rebased on v4.9-rc1 - removed MODULE_DEVICE_TABLE as in upstream bb411e771b0e ("gpio: sx150x: fix implicit assumption module.h is present") Changes since v1 - Fix Kconfig descriptions on pinctrl and gpio - Fix Kconfig dependency - Remove oscio support for non-789 devices - correct typo in dt bindings - remove probe reset for non-789 devices Changes since RFC - Put #ifdef CONFIG_OF/CONFIG_OF_GPIO to remove OF code for non-of platforms - No more rely on OF_GPIO config - Moved and enhanced bindings to pinctrl bindings - Removed gpio-sx150x.c - Temporary select PINCTRL_SX150X when GPIO_SX150X - Temporary mark GPIO_SX150X as deprecated Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Peter Rosin <peda@axentia.se> Acked-by: Rob Herring <robh@kernel.org> ested-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | gpio: ts4900: Add hardware dependenciesJean Delvare2016-10-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All the boards supported by the gpio-ts4900 driver are i.MX6 boards, so only offer the driver for building on this platform, unless build-testing. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Lucile Quirion <lucile.quirion@savoirfairelinux.com> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | gpio: altera-a10sr: Add A10 System Resource Chip GPIO support.Thor Thayer2016-10-241-0/+8
| |/ | | | | | | | | | | | | | | | | | | Add the GPIO functionality for the Altera Arria10 MAX5 System Resource Chip. The A10 MAX5 has 12 bits of GPIO assigned to switches, buttons, and LEDs as a GPIO extender on the SPI bus. Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>i Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | gpio: Remove GPIO_DEVRES optionKeno Fischer2016-11-161-4/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This option was added in 6a89a314ab107a12af08c71420c19a37a30fc2d3 to allow use of the devm_gpio_* functions without CONFIG_GPIOLIB. However, only a few months later in b69ac52449c658b7ac40034dc3c5f5f4a71a723d, CONFIG_GPIOLIB was added as a dependency, defeating the original purpose of this option. Instead of that patch, the original commit could have just been reverted (and in fact was partially so in 403c1d0be5ccbd750d25c59d8358843a81e52e3b). Further, since this option has a dependency on HAS_IOMEM, even though it does not require it, it causes build failures when !HAS_IOMEM (e.g. in a uml build). Fix that by completely removing the option, in essence completing the reversion of the original commit. Signed-off-by: Keno Fischer <keno@juliacomputing.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | gpio: mockup: add sysfs dependencyArnd Bergmann2016-10-201-1/+1
|/ | | | | | | | | | | | | Building the gpio-mockup driver without SYSFS results in a harmless Kconfig warning: warning: (GPIO_MOCKUP) selects GPIO_SYSFS which has unmet direct dependencies (GPIOLIB && SYSFS) We can easily avoid that warning by adding a dependency on SYSFS. Fixes: 0f98dd1b27d2 ("gpio/mockup: add virtual gpio device") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Merge tag 'gpio-v4.9-1' of ↵Linus Torvalds2016-10-051-22/+80
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.9 series: Subsystem improvements: - do away with the last users of the obsolete Kconfig options ARCH_REQUIRE_GPIOLIB and ARCH_WANT_OPTIONAL_GPIOLIB (the latter always sounded like an item on a wishlist to Santa Claus to me). We can now select GPIOLIB and be done with it, for all archs. After some struggle it even work on UM. Not that it has GPIO, but if it wants to, it can select the library. - continued efforts to make drivers properly either tristate or bool. - introduce a warning for drivers assigning default triggers to their irqchip lines when probed from device tree, so we find and fix these ambigous drivers. It is agreed that in the OF config path, the device tree defines trigger characteristics. - the same warning, mutatis mutandis, for ACPI-probed GPIO irqchips. - we introduce the ability to mark certain IRQ lines as "unusable" as they can be taken by BIOS/firmware, unrouted in silicon and generally nasty if you use them, and such things. This is put to good use in the STMPE driver and also in the Cherryview pin control driver. - a new "mockup" virtual GPIO device that can be used for testing. The plan is to add unit tests under tools/* for exercising this device and verify that the kernel code paths are working as they should. - make memory-mapped I/O-drivers depend on HAS_IOMEM. This was implicit all the time, but when people started building UM with allyesconfig or allmodconfig it exploded in their face. - move some stray bits of device tree and ACPI HW description callbacks down into their respective implementation silo. These were causing issues when compiling on !HAS_IOMEM as well, so now eventually UM compiles the GPIOLIB library if it wants to. New drivers: - new driver for the Aspeed GPIO front-end companion to the pin controller merged through the pin control tree. - new driver for the LP873x PMIC GPIO portions. - new driver for Technologic Systems' I2C FPGA GPIO such as TS4900, TS-7970, TS-7990 and TS-4100. - new driver for the Broadcom BCM63xx series including BCM6338 and BCM6345. - new driver for the Intel WhiskeyCove PMIC GPIO. - new driver for the Allwinner AXP209 PMIC GPIO portions. - new driver for Diamond Systems 48 line GPIO-MM, another of these port-mapped I/O expansion cards. - support the STMicroelectronics STMPE1600 variant in the STMPE driver. Driver improvements: - the STMPE driver now supports rising/falling edge detection properly for IRQs. - the PCA954x will now fetch and enable its VCC regulator properly. - major rework of the PCA953x driver with the goal of eventually switching it over to use regmap and thus modernize it even more. - switch the IOP driver to use the generic MMIO GPIO library. - move the ages old HTC EGPIO (extended GPIO) GPIO expander driver over to this subsystem from MFD, achieveing some separation of concerns" * tag 'gpio-v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (81 commits) gpio: add missing static inline gpio: OF: localize some gpiochip init functions gpio: acpi: separation of concerns gpio: OF: separation of concerns gpio: make memory-mapped drivers depend on HAS_IOMEM gpio: stmpe: use BIT() macro gpio: stmpe: forbid unused lines to be mapped as IRQs mfd/gpio: Move HTC GPIO driver to GPIO subsystem gpio: MAINTAINERS: Add an entry for GPIO mockup driver gpio/mockup: add virtual gpio device gpio: Added zynq specific check for special pins on bank zero gpio: axp209: Implement get_direction gpio: aspeed: remove redundant return value check gpio: loongson1: remove redundant return value check ARM: omap2: fix missing include gpio: tc3589x: fix up complaints on unsigned gpio: tc3589x: add .get_direction() and small cleanup gpio: f7188x: use gpiochip_get_data instead of container_of gpio: tps65218: use devm_gpiochip_add_data() for gpio registration gpio: aspeed: fix return value check in aspeed_gpio_probe() ...
| * gpio: make memory-mapped drivers depend on HAS_IOMEMLinus Walleij2016-10-031-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This one is pretty obvious: on UM Linux compilation of things like allmodconfig and allyesconfig will fail due to the absence of IO memory. Simply make these drivers depend on HAS_IOMEM, it has been implicitly assumed all the time, so just make it explicit. The generic MMIO library also assumes that IOMEM is present so make also this depend on HAS_IOMEM. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * Merge branch 'ib-move-htc-egpio' into develLinus Walleij2016-09-281-0/+8
| |\
| | * mfd/gpio: Move HTC GPIO driver to GPIO subsystemLinus Walleij2016-09-281-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The HTC GPIO driver is a pure GPIO driver and I just can not see what it is doing inside MFD. Let's just move it to GPIO and take this opportunity to move the platform data to <linux/platform_data/gpio-htc-egpio.h> Cc: arm@kernel.org Cc: Russell King <linux@armlinux.org.uk> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | gpio/mockup: add virtual gpio deviceBamvor Jian Zhang2016-09-261-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch add basic structure of a virtual gpio device(gpio-mockup) for testing gpio subsystem. The tester could manipulate such device through userspace(sysfs or char device) and check the result from debugfs. Currently, it support one or more gpiochip(determined by module parameters with base,ngpio pair). One could test the overlap of different gpiochip and test the direction and/or output values of these chips. Signed-off-by: Kamlakant Patel <kamlakant.patel@broadcom.com> Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | Merge tag 'ib-mfd-gpio-regulator-v4.9' of ↵Linus Walleij2016-09-131-0/+10
| |\ \ | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into devel Immutable branch between MFD, GPIO and Regulator due for the v4.9 merge window
| | * | gpio: lp873x: Add support for General Purpose OutputsKeerthy2016-08-311-0/+10
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | Add driver for lp873x PMIC family GPOs. Two GPOs are supported and can be configured in Open-drain output or Push-pull output. Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| * | gpio: iop: Use generic GPIO MMIO functions for driverAlexander Shiyan2016-09-121-1/+2
| | | | | | | | | | | | | | | | | | | | | This patch switches the driver to use the generic GPIO MMIO functions that removes a bit of redundant and duplicate code. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | gpio: Add Aspeed driverJoel Stanley2016-09-071-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Aspeed SoCs contain GPIOs banked by letter, where each bank contains 8 pins. The GPIO banks are then grouped in sets of four in the register layout. The implementation exposes multiple banks through the one driver and requests and releases pins via the pinctrl subsystem. The hardware supports generation of interrupts from all GPIO-capable pins. A number of hardware features are not yet supported: Configuration of interrupt direction (ARM or LPC), debouncing, and WDT reset tolerance for output ports. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-05 15:56:07 +0200