summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/radeon/rv515.c
Commit message (Collapse)AuthorAgeFilesLines
* drm/radeon: make sure mode init is complete in bandwidth_updateAlex Deucher2014-11-061-0/+3
| | | | | | | | | | | | | | | | | | The power management code calls into the display code for certain things. If certain power management sysfs attributes are called before the driver has finished initializing all of the hardware we can run into problems with uninitialized modesetting state. Add a check to make sure modesetting init has completed to the bandwidth update callbacks to fix this. Can be triggered by the tlp and laptop start up scripts depending on the timing. bugs: https://bugzilla.kernel.org/show_bug.cgi?id=83611 https://bugs.freedesktop.org/show_bug.cgi?id=85771 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
* drm/radeon: Only flush HDP cache for indirect buffers from userspaceMichel Dänzer2014-08-181-1/+1
| | | | | | | | It isn't necessary for command streams generated by the kernel (at least not while we aren't storing ring or indirect buffers in VRAM). Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/radeon: Prevent too early kms-pageflips triggered by vblank.Mario Kleiner2014-07-171-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since 3.16-rc1 we have this new failure: When the userspace XOrg ddx schedules vblank events to trigger deferred kms-pageflips, e.g., via the OML_sync_control extension call glXSwapBuffersMscOML(), or if a glXSwapBuffers() is called immediately after completion of a previous swapbuffers call, e.g., in a tight rendering loop with minimal rendering, it happens frequently that the pageflip ioctl() is executed within the same vblank in which a previous kms-pageflip completed, or - for deferred swaps - always one vblank earlier than requested by the client app. This causes premature pageflips and detection of failure by the ddx, e.g., XOrg log warnings like... "(WW) RADEON(1): radeon_dri2_flip_event_handler: Pageflip completion event has impossible msc 201025 < target_msc 201026" ... and error/invalid return values of glXWaitForSbcOML() and Intel_swap_events extension. Reason is the new way in which kms-pageflips are programmed since 3.16. This commit changes the time window in which the hw can execute pending programmed pageflips. Before, a pending flip would get executed anywhere within the vblank interval. Now a pending flip only gets executed at the leading edge of vblank (start of front porch), making sure that a invocation of the pageflip ioctl() within a given vblank interval will only lead to pageflip completion in the following vblank. Tested to death on a DCE-4 card. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/radeon: resume old pm lateAlex Deucher2014-03-061-2/+0Star
| | | | | | | | Moving the pm resume up in the init order to fix dpm seems to have regressed somes cases with the old pm code. Move it back to late resume. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/radeon/pm: move pm handling into the asic specific codeAlex Deucher2013-12-241-0/+7
| | | | | | | | | | | | | | We need more control over the ordering of dpm init with respect to the rest of the asic. Specifically, the SMC has to be initialized before the rlc and cg/pg. The pm code currently initializes late in the driver, but we need it to happen much earlier so move pm handling into the asic specific callbacks. This makes dpm more reliable and makes clockgating work properly on CIK parts and should help on SI parts as well. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/radeon: fix-up some float to fixed conversion thinkosAlex Deucher2013-11-081-8/+0Star
| | | | | | | Spotted by Brad Smith when porting to OpenBSD. Noticed-by: Brad Smith <brad@comstyle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/radeon: add spinlocks for indirect register accesssAlex Deucher2013-09-111-0/+8
| | | | | | | | | This adds spinlocks to protect access to other indirect register apertures. These indirect spaces are used pretty infrequently and we haven't had an reported problems, but better safe than sorry. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/radeon/kms: fix up 6xx/7xx display watermark calc for dpmAlex Deucher2013-06-271-92/+132
| | | | | | | | Calculate the low and high watermarks based on the low and high clocks for the current power state. The dynamic pm hw will select the appropriate watermark based on the internal dpm state. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* radeon: Fix system hang issue when using KMS with older cardsAdis Hamzić2013-06-031-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current radeon driver initialization routines, when using KMS, are written so that the IRQ installation routine is called before initializing the WB buffer and the CP rings. With some ASICs, though, the IRQ routine tries to access the GFX_INDEX ring causing a call to RREG32 with the value of -1 in radeon_fence_read. This, in turn causes the system to completely hang with some cards, requiring a hard reset. A call stack that can cause such a hang looks like this (using rv515 ASIC for the example here): * rv515_init (rv515.c) * radeon_irq_kms_init (radeon_irq_kms.c) * drm_irq_install (drm_irq.c) * radeon_driver_irq_preinstall_kms (radeon_irq_kms.c) * rs600_irq_process (rs600.c) * radeon_fence_process - due to SW interrupt (radeon_fence.c) * radeon_fence_read (radeon_fence.c) * hang due to RREG32(-1) The patch moves the IRQ installation to the card startup routine, after the ring has been initialized, but before the IRQ has been set. This fixes the issue, but requires a check to see if the IRQ is already installed, as is the case in the system resume codepath. I have tested the patch on three machines using the rv515, the rv770 and the evergreen ASIC. They worked without issues. This seems to be a known issue and has been reported on several bug tracking sites by various distributions (see links below). Most of reports recommend booting the system with KMS disabled and then enabling KMS by reloading the radeon module. For some reason, this was indeed a usable workaround, however, UMS is now deprecated and disabled by default. Bug reports: https://bugzilla.redhat.com/show_bug.cgi?id=845745 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/561789 https://bbs.archlinux.org/viewtopic.php?id=156964 Signed-off-by: Adis Hamzić <adis@hamzadis.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
* drm/radeon: disable the crtcs in mc_stop (r5xx-r7xx) (v2)Alex Deucher2013-04-221-0/+11
| | | | | | | | | | Just disabling the mem requests should be enough, but that doesn't seem to work correctly on efi systems. v2: blank displays first, then disable. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
* drm/radeon: properly lock disp in mc_stop/resume for r5xx-r7xxAlex Deucher2013-04-221-0/+43
| | | | | | | | Need to wait for the new addresses to take affect before re-enabling the MC. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
* drm/radeon: fix typo in rv515_mc_resume()Alex Deucher2013-04-081-1/+1
| | | | | | | | Doesn't affect anything as the same address gets written in both cases. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
* drm/radeon/r5xx-r7xx: wait for the MC to settle after MC blackoutAlex Deucher2013-01-311-0/+2
| | | | | | | | | Some chips seem to need a little delay after blacking out the MC before the requests actually stop. Stop DMAR errors reported by Shuah Khan. Reported-by: Shuah Khan <shuahkhan@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/radeon: improve mc_stop/mc_resume on r5xx-r7xxAlex Deucher2012-12-121-16/+106
| | | | | | | Along the same lines of what was done for evergreen+ in the last kernel. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds2012-10-041-9/+9
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull drm merge (part 1) from Dave Airlie: "So first of all my tree and uapi stuff has a conflict mess, its my fault as the nouveau stuff didn't hit -next as were trying to rebase regressions out of it before we merged. Highlights: - SH mobile modesetting driver and associated helpers - some DRM core documentation - i915 modesetting rework, haswell hdmi, haswell and vlv fixes, write combined pte writing, ilk rc6 support, - nouveau: major driver rework into a hw core driver, makes features like SLI a lot saner to implement, - psb: add eDP/DP support for Cedarview - radeon: 2 layer page tables, async VM pte updates, better PLL selection for > 2 screens, better ACPI interactions The rest is general grab bag of fixes. So why part 1? well I have the exynos pull req which came in a bit late but was waiting for me to do something they shouldn't have and it looks fairly safe, and David Howells has some more header cleanups he'd like me to pull, that seem like a good idea, but I'd like to get this merge out of the way so -next dosen't get blocked." Tons of conflicts mostly due to silly include line changes, but mostly mindless. A few other small semantic conflicts too, noted from Dave's pre-merged branch. * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (447 commits) drm/nv98/crypt: fix fuc build with latest envyas drm/nouveau/devinit: fixup various issues with subdev ctor/init ordering drm/nv41/vm: fix and enable use of "real" pciegart drm/nv44/vm: fix and enable use of "real" pciegart drm/nv04/dmaobj: fixup vm target handling in preparation for nv4x pcie drm/nouveau: store supported dma mask in vmmgr drm/nvc0/ibus: initial implementation of subdev drm/nouveau/therm: add support for fan-control modes drm/nouveau/hwmon: rename pwm0* to pmw1* to follow hwmon's rules drm/nouveau/therm: calculate the pwm divisor on nv50+ drm/nouveau/fan: rewrite the fan tachometer driver to get more precision, faster drm/nouveau/therm: move thermal-related functions to the therm subdev drm/nouveau/bios: parse the pwm divisor from the perf table drm/nouveau/therm: use the EXTDEV table to detect i2c monitoring devices drm/nouveau/therm: rework thermal table parsing drm/nouveau/gpio: expose the PWM/TOGGLE parameter found in the gpio vbios table drm/nouveau: fix pm initialization order drm/nouveau/bios: check that fixed tvdac gpio data is valid before using it drm/nouveau: log channel debug/error messages from client object rather than drm client drm/nouveau: have drm debugging macros build on top of core macros ...
| * drm/radeon: Mark all possible functions / structs as staticLauri Kasanen2012-09-201-9/+9
| | | | | | | | | | | | | | | | | | Let's allow GCC to optimize better. This exposed some five unused functions, but this patch doesn't remove them. Signed-off-by: Lauri Kasanen <cand@gmx.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* | UAPI: (Scripted) Convert #include "..." to #include <path/...> in drivers/gpu/David Howells2012-10-021-1/+1
|/ | | | | | | | | | | Convert #include "..." to #include <path/...> in drivers/gpu/. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Dave Airlie <airlied@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com>
* drm/radeon: do not reenable crtc after moving vram start addressJerome Glisse2012-08-131-13/+0Star
| | | | | | | | | | | | | | | | | | | | | | It seems we can not update the crtc scanout address. After disabling crtc, update to base address do not take effect after crtc being reenable leading to at least frame being scanout from the old crtc base address. Disabling crtc display request lead to same behavior. So after changing the vram address if we don't keep crtc disabled we will have the GPU trying to read some random system memory address with some iommu this will broke the crtc engine and will lead to broken display and iommu error message. So to avoid this, disable crtc. For flicker less boot we will need to avoid moving the vram start address. This patch should also fix : https://bugs.freedesktop.org/show_bug.cgi?id=42373 Cc: <stable@vger.kernel.org> Signed-off-by: Jerome Glisse <jglisse@redhat.com>
* drm/radeon: move radeon_ib_ring_tests out of chipset codeChristian König2012-07-171-4/+0Star
| | | | | | | | Making it easier to control when it is executed. Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
* drm/radeon: remove ip_pool start/suspendChristian König2012-07-171-10/+6Star
| | | | | | | | The IB pool is in gart memory, so it is completely superfluous to unpin / repin it on suspend / resume. Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
* drm/radeon: use central function for IB testingChristian König2012-05-031-5/+3Star
| | | | | | | | | | | Removing all the different error messages and having just one standard behaviour over all chipset generations. Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds2012-03-221-3/+2Star
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull drm main changes from Dave Airlie: "This is the main drm pull request, I'm probably going to send two more smaller ones, will explain below. This contains a patch that is also in the fbdev tree, but it should be the same patch, it added an API for hot unplugging framebuffer devices, and I need that API for a new driver. It also contains some changes to the i2c tree which Jean has acked, and one change to moorestown platform stuff in x86. Highlights: - new drivers: UDL driver for USB displaylink devices, kms only, should support correct hotplug operations. - core: i2c speedups + better hotplug support, EDID overriding via firmware interface - allows user to load a firmware for a broken monitor/kvm from userspace, it even has documentation for it. - exynos: new HDMI audio + hdmi 1.4 + virtual output driver - gma500: code cleanup - radeon: cleanups, CS optimisations, streamout support and pageflip fix - nouveau: NVD9 displayport support + more reclocking work - i915: re-enabling GMBUS, finish gpu patch (might help hibernation who knows), missed irq fixes, stencil tiling fixes, interlaced support, aliasesd PPGTT support for SNB/IVB, swizzling for SNB/IVB, semaphore fixes As well as the usual bunch of cleanups and fixes all over the place. I've got two things I'd like to merge a bit later: a) AMD support for all their new radeonhd 7000 series GPU and APUs. AMD dropped this a bit late due to insane internal review processes, (please AMD just follow Intel and let open source guys ship stuff early) however I don't want to penalise people who own this hardware (since its been on sale for 3-4 months and GPU hw doesn't exactly have a lifetime in years) and consign them to using closed drivers for longer than necessary. The changes are well contained and just plug into the driver new gpu functionality so they should be fairly regression proof. I just want to give them a bit of a run on the hw AMD kindly sent me. b) drm prime/dma-buf interface code. This is just infrastructure code to expose the dma-buf stuff to drm drivers and to userspace. I'm not planning on pushing any driver support in this cycle (except maybe exynos), but I'd like to get the infrastructure code in so for the next cycle I can start getting the driver support into the individual drivers. We have started driver support for i915, nouveau and udl along with I think exynos and omap in staging. However this code relies on the dma-buf tree being pulled into your tree first since it needs the latest interfaces from that tree. I'll push to get that tree sent asap. (oh and any warnings you see in i915 are gcc's fault from what anyone can see)." Fix up trivial conflicts in arch/x86/platform/mrst/mrst.c due to the new msic_thermal_platform_data() thermal function being added next to the tc35876x_platform_data() i2c device function.. * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (326 commits) drm/i915: use DDC_ADDR instead of hard-coding it drm/radeon: use DDC_ADDR instead of hard-coding it drm: remove unneeded redefinition of DDC_ADDR drm/exynos: added virtual display driver. drm: allow loading an EDID as firmware to override broken monitor drm/exynos: enable hdmi audio feature drm/exynos: add default pixel format for plane drm/exynos: cleanup exynos_hdmi.h drm/exynos: add is_local member in exynos_drm_subdrv struct drm/exynos: add subdrv open/close functions drm/exynos: remove module of exynos drm subdrv drm/exynos: release pending pageflip events when closed drm/exynos: added new funtion to get/put dma address. drm/exynos: update gem and buffer framework. drm/exynos: added mode_fixup feature and code clean. drm/exynos: add HDMI version 1.4 support drm/exynos: remove exynos_mixer.h gma500: Fix mmap frambuffer drm/radeon: Drop radeon_gem_object_(un)pin. drm/radeon: Restrict offset for legacy display engine. ...
| * drm: Merge tag 'v3.3-rc7' into drm-core-nextDave Airlie2012-03-151-1/+7
| |\ | | | | | | | | | | | | | | | | | | | | | Merge the fixes so far into core-next, needed to test intel driver. Conflicts: drivers/gpu/drm/i915/intel_ringbuffer.c
| * | drm/radeon/kms: make ring_start, ring_test, and ib_test per ringAlex Deucher2012-02-291-3/+2Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Each ring type may need a different variant. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König<christian.koenig@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* | | Merge branch 'for-linus' of ↵Linus Torvalds2012-03-211-2/+2
|\ \ \ | |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree from Jiri Kosina: "It's indeed trivial -- mostly documentation updates and a bunch of typo fixes from Masanari. There are also several linux/version.h include removals from Jesper." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (101 commits) kcore: fix spelling in read_kcore() comment constify struct pci_dev * in obvious cases Revert "char: Fix typo in viotape.c" init: fix wording error in mm_init comment usb: gadget: Kconfig: fix typo for 'different' Revert "power, max8998: Include linux/module.h just once in drivers/power/max8998_charger.c" writeback: fix fn name in writeback_inodes_sb_nr_if_idle() comment header writeback: fix typo in the writeback_control comment Documentation: Fix multiple typo in Documentation tpm_tis: fix tis_lock with respect to RCU Revert "media: Fix typo in mixer_drv.c and hdmi_drv.c" Doc: Update numastat.txt qla4xxx: Add missing spaces to error messages compiler.h: Fix typo security: struct security_operations kerneldoc fix Documentation: broken URL in libata.tmpl Documentation: broken URL in filesystems.tmpl mtd: simplify return logic in do_map_probe() mm: fix comment typo of truncate_inode_pages_range power: bq27x00: Fix typos in comment ...
| * | drm: Fix typo in rv515.cMasanari Iida2012-02-051-2/+2
| |/ | | | | | | | | | | | | | | Correct spelling "reseting" to "resetting" in drivers/gpu/drm/radeon/rv515.c Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* / drm/radeon/kms: properly set accel working flag and bailout when falseJerome Glisse2012-02-221-1/+7
|/ | | | | | | | | | | | If accel is not working many subsystem such as the ib pool might not be initialized properly that can lead to segfault inside kernel when cs ioctl is call with non working acceleration. To avoid this make sure the accel working flag is false when an error in GPU startup happen and return EBUSY from cs ioctl if accel is not working. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/radeon: introduce a sub allocator and convert ib pool to it v4Jerome Glisse2011-12-201-2/+17
| | | | | | | | | | | | | | | | | Somewhat specializaed sub-allocator designed to perform sub-allocation for command buffer not only for current cs ioctl but for future command submission ioctl as well. Patch also convert current ib pool to use the sub allocator. Idea is that ib poll buffer can be share with other command buffer submission not having 64K granularity. v2 Harmonize pool handling and add suspend/resume callback to pin/unpin sa bo (tested on rv280, rv370, r420, rv515, rv610, rv710, redwood, cayman, rs480, rs690, rs880) v3 Simplify allocator v4 Fix radeon_ib_get error path to properly free fence Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/radeon: precompute fence cpu/gpu addr once v3Jerome Glisse2011-12-201-1/+7
| | | | | | | | | | | | | | | | | | | | | | Add a start fence driver helper function which will be call once for each ring and will compute cpu/gpu addr for fence depending on wether to use wb buffer or scratch reg. This patch replace initialize fence driver separately which was broken in regard of GPU lockup. The fence list for created, emited, signaled must be initialize once and only from the asic init callback not from the startup call back which is call from the gpu reset. v2: With this in place we no longer need to know the number of rings in fence_driver_init, also writing to the scratch reg before knowing its offset is a bad idea. v3: rebase on top of change to previous patch in the serie Signed-off-by: Christian König <deathsimple@vodafone.de> Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/radeon: rename struct radeon_cp to radeon_ringChristian König2011-12-201-41/+41
| | | | | | | | | That naming seems to make more sense, since we not only want to run PM4 rings with it. Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/radeon: make cp variable an arrayChristian König2011-12-201-1/+1
| | | | | | | | | Replace cp, cp1 and cp2 members with just an array of radeon_cp structs. Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/radeon: make all functions work with multiple rings.Christian König2011-12-201-40/+41
| | | | | | | | | Give all asic and radeon_ring_* functions a radeon_cp parameter, so they know the ring to work with. Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/radeon/kms: add support for multiple fence queues v2Alex Deucher2011-12-201-1/+1
| | | | | | | | | | | | | | For supporting multiple CP ring buffers, async DMA engines and UVD. We still need a way to synchronize between engines. v2 initialize unused fence driver ring to avoid issue in suspend/unload Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm: Fix printk typo 'failled'Paul Bolle2011-02-171-2/+2
| | | | | Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* drm/radeon/kms: clean up some magic numbersAlex Deucher2011-01-271-5/+5
| | | | | Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
* drm/radeon/kms: enable writeback (v2)Alex Deucher2010-10-061-6/+9
| | | | | | | | | | | | | | | | | | | | | | | | | When writeback is enabled, the GPU shadows writes to certain registers into a buffer in memory. The driver can then read the values from the shadow rather than reading back from the register across the bus. Writeback can be disabled by setting the no_wb module param to 1. On r6xx/r7xx/evergreen, the following registers are shadowed: - CP scratch registers - CP read pointer - IH write pointer On r1xx-rr5xx, the following registers are shadowed: - CP scratch registers - CP read pointer v2: - Combine wb patches for r6xx-evergreen and r1xx-r5xx - Writeback is disabled on AGP boards since it tends to be unreliable on AGP using the gart. - Check radeon_wb_init return values properly. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/radeon/kms: handle the case of no active displays properly in the ↵Alex Deucher2010-08-041-14/+9Star
| | | | | | | | | | | | | | | | | | | | | | | | bandwidth code Logic was: if (mode0 && mode1) else if (mode0) else Should be: if (mode0 && mode1) else if (mode0) else if (mode1) Otherwise we may end up calculating the priority regs with unitialized values. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=16492 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
* Merge tag 'v2.6.35-rc6' into drm-radeon-nextDave Airlie2010-08-021-0/+1
|\ | | | | | | Need this to avoid conflicts with future radeon fixes
| * drm/radeon/kms: fix gtt MC base alignment on rs4xx/rs690/rs740 asicsAlex Deucher2010-07-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The asics in question have the following requirements with regard to their gart setups: 1. The GART aperture size has to be in the form of 2^X bytes, where X is from 25 to 31 2. The GART aperture MC base has to be aligned to a boundary equal to the size of the aperture. 3. The GART page table has to be aligned to the boundary equal to the size of the table. 4. The GART page table size is: table_entry_size * (aperture_size / page_size) 5. The GART page table has to be allocated in non-paged, non-cached, contiguous system memory. This patch takes care 2. The rest should already be handled properly. This fixes a regression noticed by: Torsten Kaiser <just.for.lkml@googlemail.com> Tested-by: Torsten Kaiser <just.for.lkml@googlemail.com> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* | drm/radeon/kms: check/restore sanity before doing anything else with GPU.Dave Airlie2010-08-021-0/+2
|/ | | | | | | | | | On systems using kexec, the new kernel is booted straight from the old kernel, without any warning to the graphics driver. So the GPU is basically left as-is in a running state, however the CPU side is completly reset. Without stating the saneness of anyone using kexec on live systems, we should at least try not to crash the GPU. This patch resets 3 registers to 0 that could cause bad things to happen to the running system. This allows kexec to work on a Power6/RN50 system. Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/radeon/kms/pm: rework power managementAlex Deucher2010-05-181-3/+0Star
| | | | | | | | | | | | | | | | | | | | | | | - Separate dynpm and profile based power management methods. You can select the pm method by echoing the selected method ("dynpm" or "profile") to power_method in sysfs. - Expose basic 4 profile in profile method "default" - default clocks "auto" - select between low and high based on ac/dc state "low" - DC, low power mode "high" - AC, performance mode The current base profile is "default", but it should switched to "auto" once we've tested on more systems. Switching the state is a matter of echoing the requested profile to power_profile in sysfs. The lowest power states are selected automatically when dpms turns the monitors off in all states but default. - Remove dynamic fence-based reclocking for the moment. We can revisit this later once we have basic pm in. - Move pm init/fini to modesetting path. pm is tightly coupled with display state. Make sure display side is initialized before pm. - Add pm suspend/resume functions to make sure pm state is properly reinitialized on resume. - Remove dynpm module option. It's now selectable via sysfs. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm: move radeon_fixed.h to shared drm_fixed.h headerBen Skeggs2010-05-181-94/+94
| | | | | | | Will be used by nouveau driver also in the near future. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* Merge branch 'drm-radeon-lockup' into drm-core-nextDave Airlie2010-04-201-93/+3Star
|\ | | | | | | | | | | | | | | | | | | * drm-radeon-lockup: drm/radeon/kms: simplify & improve GPU reset V2 drm/radeon/kms: rename gpu_reset to asic_reset drm/radeon/kms: fence cleanup + more reliable GPU lockup detection V4 Conflicts: drivers/gpu/drm/radeon/r300.c
| * drm/radeon/kms: simplify & improve GPU reset V2Jerome Glisse2010-04-061-90/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This simplify and improve GPU reset for R1XX-R6XX hw, it's not 100% reliable here are result: - R1XX/R2XX works bunch of time in a row, sometimes it seems it can work indifinitly - R3XX/R3XX the most unreliable one, sometimes you will be able to reset few times, sometimes not even once - R5XX more reliable than previous hw, seems to work most of the times but once in a while it fails for no obvious reasons (same status than previous reset just no same happy ending) - R6XX/R7XX are lot more reliable with this patch, still it seems that it can fail after a bunch (reset every 2sec for 3hour bring down the GPU & computer) This have been tested on various hw, for some odd reasons i wasn't able to lockup RS480/RS690 (while they use to love locking up). Note that on R1XX-R5XX the cursor will disapear after lockup haven't checked why, switch to console and back to X will restore cursor. Next step is to record the bogus command that leaded to the lockup. V2 Fix r6xx resume path to avoid reinitializing blit module, use the gpu_lockup boolean to avoid entering inifinite waiting loop on fence while reiniting the GPU Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
| * drm/radeon/kms: rename gpu_reset to asic_resetJerome Glisse2010-04-061-4/+4
| | | | | | | | | | | | | | | | Patch rename gpu_reset to asic_reset in prevision of having gpu_reset doing more stuff than just basic asic reset. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* | Merge branch 'master' into export-slabhTejun Heo2010-04-051-17/+28
|\|
| * drm/radeon/kms: display watermark updates (v2)Alex Deucher2010-03-311-10/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Add module option to force the display priority 0 = auto, 1 = normal, 2 = high - Default to high on r3xx/r4xx/rv515 chips Fixes flickering problems during heavy acceleration due to underflow to the display controllers - Fill in minimal support for RS600 v2 - update display priority when bandwidth is updated so the user can change the parameter at runtime and it will take affect on the next modeset. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
| * drm/radeon/kms: display watermark fixesAlex Deucher2010-03-311-7/+1Star
| | | | | | | | | | | | | | | | | | | | - rs780/880 were using the wrong bandwidth functions - convert r1xx-r4xx to use the same pm sclk/mclk structs as r5xx+ - move bandwidth setup to a common function Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
| * drm/radeon/kms: expose thermal/fan i2c busesAlex Deucher2010-03-311-0/+1
| | | | | | | | | | | | | | | | Look up i2c bus in the power table and expose it. You'll need to load a hwmon driver for any chips on the bus, this patch just exposes the bus. Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
| * drm/radeon: include radeon_asic.h in the asic specific filesDaniel Vetter2010-03-151-0/+1
| | | | | | | | | | | | | | | | In essence this creates a home for all asic specific declarations in radeon_asic.h Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-11-14 04:42:23 +0100