summaryrefslogtreecommitdiffstats
path: root/drivers/hid
Commit message (Collapse)AuthorAgeFilesLines
*-------------. Merge branches 'for-4.2/i2c-hid', 'for-4.2/lenovo', 'for-4.2/plantronics', ↵Jiri Kosina2015-06-2215-378/+973
|\ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'for-4.2/rmi', 'for-4.2/sensor-hub', 'for-4.2/sjoy', 'for-4.2/sony' and 'for-4.2/wacom' into for-linus Conflicts: drivers/hid/wacom_wac.c
| | | | | | | | * HID: wacom: Introduce new 'touch_input' deviceJason Gerecke2015-06-183-101/+139
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of having a single 'input_dev' device that will take either pen or touch data depending on the type of the device, create seperate devices devices for each. By splitting things like this, we can support devices (e.g. the I2C "AES" sensors in some newer tablet PCs) that send both pen and touch reports from a single endpoint. Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | | | | | | | * HID: wacom: Split apart 'wacom_setup_pentouch_input_capabilites'Jason Gerecke2015-06-183-115/+131
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This splits the 'wacom_setup_pentouch_input_capabilites' function into pieces dedicated to doing setup for just the pen interface and just the touch interface. This makes it easier to focus on the relevant piece when making changes. This patch introduces no functional changes. Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | | | | | | | * HID: wacom: Introduce a new WACOM_DEVICETYPE_PAD device_typeJason Gerecke2015-06-183-64/+73
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Historically, both the touch and pad tools would have shared the 'BTN_TOOL_FINGER' type. Any time you needed to distinguish the two, you had to use some other bit of knowledge (e.g. that the pad was on the same interface as the pen, and thus 'touch_max' would be zero). To make these checks more readable, we introduce WACOM_DEVICETYPE_PAD. Although we still have to rely on other bits of knowledge to set this bit on the right interface (since it cannot be detected from the HID descriptor), it can be done just once inside 'wacom_setup_device_quirks'. This patch introduces no functional changes. Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | | | | | | | * HID: wacom: Treat features->device_type values as flagsJason Gerecke2015-06-183-32/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The USB devices that this driver has historically supported segregate the pen and touch portions of the tablet. Oftentimes the segregation would be done at the interface level, though on occasion (e.g. Cintiq 24HDT) the tablet would combine two totally independent USB devices behind an internal USB hub. Because pen and touch never shared the same interface, it made sense for the 'device_type' to store a single value: "pen" or "touch". Recently, however, some I2C devices have been created which combine the two. A first step to accomodating this is to expand 'device_type' so that it can represent two (or potentially more) types simultaneously. To do this, we treat it as a bitfield and set/check individual bits rather than using the '=' and '==' operators. This should not result in any functional change since no supported devices (that I'm aware of, at least) have HID descriptors that indicate both pen and touch reports on a single interface. Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | | | | | | | * HID: wacom: Simplify 'wacom_update_name'Jason Gerecke2015-06-181-11/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A little bit of cleanup work for 'wacom_update_name' to make it easier on the eyes. Creates a temporary 'name' variable on which we'll perform our edits. Once the name is in its final form, it will be copied (with appropriate suffix) to 'wacom_wac->name' and 'wacom_wac->pad_name'. Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | | | | | | | * HID: wacom: Handle failing HID_DG_CONTACTMAX requestsJason Gerecke2015-05-211-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware may not respond to a request for the HID_DG_CONTACTMAX feature and we should be tolerant of such a failure. This is especially true when using hid-replay where the hardware doesn't exist, but also for devices attached to a flaky bus. This patch increases the number of allowable retries to match other calls to 'wacom_get_report' and also provides a fallback which forces 'touch_max = 16' (enough for any Wacom device seen so far). Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | | | | | | | * HID: wacom: Have wacom_{get,set}_report retry on -EAGAIN, not -EPIPEJason Gerecke2015-05-211-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Retrying on -EPIPE makes very little sense since this typically indicates a problem that will not just disappear on its own. For instance, the USB documentation states that it will be sent if the endpoint is stalled or the device has disconnected. Instead, we should retry if -EAGAIN is received since this indicates a temporary error condition such as a busy bus. In addition to adjusting the conditions we retry under, we also log an error on failure so that we can be aware of what's going on. Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | | | | | | | * HID: wacom: Fail probe if HID_GENERIC device has unknown device_typeJason Gerecke2015-05-041-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The last patch was careful to maintain backwards-compatible behavior by forcing device_type to BTN_TOOL_PEN (and printing a warning) if it were still uninitialized after scanning the HID descriptor and applying quirks. We should be more strict with HID_GENERIC devices, however, since there is no a priori guarantee that it is a tablet or touchpad. If the device_type is still uninitialized for a HID_GENERIC device then we assume that it isn't something the driver can work with and so fail the probe. Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | | | | | | | * HID: wacom: Discover device_type from HID descriptor for all devicesJason Gerecke2015-05-043-14/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, we assume a device_type of BTN_TOOL_PEN before scanning the HID descriptor and then change the device_type if what we discover proves that assumption wrong. This way of doing things makes it more difficult to figure out if a device (particularly a HID_GENERIC device) actually does tablet/touch input or is something completley different. This patch leaves device_type at its initial value of 0 and then calls 'wacom_parse_hid' for every device (not just those that have touch). As we map the usages, we can set the device_type as before. After we're finished, we can then check if the value is still zero and do whatever is most appropriate. Detecting the pen can be a little tricky on most Wacom devices because the descriptors describe opaque blobs. Fortunately, older Wacom tablets have the HID_DG_DIGITIZER usage on the pen's application collection and newer tablets seem to have a similar vendor-defined usage that we can trigger on. Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | | | | | | | * HID: wacom: Do not add suffix to name of devices with an unknown typeJason Gerecke2015-05-041-5/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The naming logic currently assumes that all devices will be a pen, finger, or pad. Though this has historically been the case, the new HID_GENERIC catch-all may cause us to probe devices with Wacom's 056A VID which aren't any of these types (e.g. the "Cintiq 24HDT Monitor Control"). This patch updates the logic so that no suffix will be added to the device name if the device type is unknown. Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | | | | | | | * HID: wacom: retrieve name from HID descriptor for generic devicesPing Cheng2015-04-271-11/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | HID generic devices share the same default name, "Wacom HID". This causes userland programs to show same device names for different devices, which would confuse end users with same device names for different devices too. This patch uses name retrieved from HID descriptor, if a meaningful name is reported. Otherwise, affix its product ID to "Wacom HID". Names from descriptor may contain extra whitespaces. To comfort readers' eyes, we removed those extra whitespaces too. Signed-off-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | | | | | | | * HID: wacom: Add support for DTU-1141Aaron Skomra2015-04-231-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Aaron Skomra <aaron.skomra@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | | | | | | | * HID: wacom: Simplify check for presence of single-finger touchJason Gerecke2015-04-231-3/+2Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To determine if a touch is present in the single-touch case, we can simply check if the BTN_TOUCH key is active or not. This will work for both HID_GENERIC and other device types. Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | | | | | | | * HID: wacom: remove unused packet lengthsPing Cheng2015-04-231-6/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We use generic hid_report_len() to get individual packet length now. Signed-off-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | | | | | | | * HID: wacom: move unit and unitExpo initialization to wacom_calculate_resPing Cheng2015-04-231-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | That is where they belong... Signed-off-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | | | | | | | * HID: wacom: move all quirks to wacom_setup_device_quirksPing Cheng2015-04-233-40/+31Star
| | | | | | |_|/ | | | | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It makes probe routine easy to follow. Signed-off-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | | | | | | * HID: hid-sony: Fix report descriptor for Navigation ControllerSimon Wood2015-06-181-1/+90
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch report descriptor to remove unused and ramdomly changing axis. Original report descriptor (via BT) was as follows: 00000000 05 01 09 04 a1 01 a1 02 85 01 75 08 95 01 15 00 |..........u.....| 00000010 26 ff 00 81 03 75 01 95 13 15 00 25 01 35 00 45 |&....u.....%.5.E| 00000020 01 05 09 19 01 29 13 81 02 75 01 95 0d 06 00 ff |.....)...u......| 00000030 81 03 15 00 26 ff 00 05 01 09 01 a1 00 75 08 95 |....&........u..| 00000040 04 35 00 46 ff 00 09 30 09 31 09 32 09 35 81 02 |.5.F...0.1.2.5..| 00000050 c0 05 01 75 08 95 27 09 01 81 02 75 08 95 30 09 |...u..'....u..0.| 00000060 01 91 02 75 08 95 30 09 01 b1 02 c0 a1 02 85 02 |...u..0.........| 00000070 75 08 95 30 09 01 b1 02 c0 a1 02 85 ee 75 08 95 |u..0.........u..| 00000080 30 09 01 b1 02 c0 a1 02 85 ef 75 08 95 30 09 01 |0.........u..0..| 00000090 b1 02 c0 c0 00 |.....| 00000095 Signed-off-by: Simon Wood <simon@mungewell.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | | | | | | * HID: hid-sony: Navigation controller only has 1 LED and no rumbleSimon Wood2015-06-181-8/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Simon Wood <simon@mungewell.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | | | | | | * HID: hid-sony: Add BT support for Navigation ControllerSimon Wood2015-06-182-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Simon Wood <simon@mungewell.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | | | | | | * HID: sony: PS Move fix report descriptorSimon Wood2015-06-121-25/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the report descriptor so that the buttons and trigger are correctly reported. The format of the input report is described here: https://github.com/nitsch/moveonpc/wiki/Input-report The Accelerometers and Gyros (1st frame only) are also reported as axis, but the Magnetometers are NOT as 'fixing' their byte order would break user-space drivers such as PSMoveAPI. It is hoped to resolve this at a future time. Signed-off-by: Simon Wood <simon@mungewell.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | | | | | | * HID: sony: PS3 Move enable LEDs and Rumble via BTSimon Wood2015-06-121-6/+5Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The LED and Rumble control only function via BT if the full output report is sent. The large report still functions via USB. Signed-off-by: Simon Wood <simon@mungewell.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | | | | | | * HID: sony: Add support PS3 Move Battery via BTSimon Wood2015-06-121-4/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the battery charge level and state to be read via BT. This is not support via USB as there is no know way to get the device sending 'input' reports over USB. Signed-off-by: Simon Wood <simon@mungewell.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | | | | | | * HID: sony: Add quirk for MOTION_CONTROLLER_BTSimon Wood2015-06-121-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Split quirk for PS Move Controller as it has to be treated differently when connected via BT. Signed-off-by: Simon Wood <simon@mungewell.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | | | | | | * HID: sony: Support PS3 Move Controller when connected via BluetoothSimon Wood2015-06-122-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Simon Wood <simon@mungewell.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | | | | | | * HID: sony: Correct a typo in a HID descriptor comment and explain the odd ↵Frank Praznik2015-05-071-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sixaxis axis mapping Correct a spelling mistake in the Sixaxis HID descriptor comment. Add an explanation as to why the Sixaxis has so many analog axes and why some of them are seen as multi-touch axes. Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | | | | | | * HID: sony: Simplify LED initialization and eliminate redundant copies when ↵Frank Praznik2015-05-071-30/+28Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | updating LED states Directly set the initial LED states in the device state struct instead of copying them from a temporary array. This allows for the removal of a redundant "x = x" copy loop in sony_set_leds() that was taking place any time an LED was updated. It also allows for the simplifying of the parameters in functions dealing with LED initialization and updates since only a pointer to the sony_sc struct is needed now. Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | | | | | | * HID: sony: Correct Sony device orderingFrank Praznik2015-05-071-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rearrange Sony controller devices into alphabetical order in the hardware device list. Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | | | | | | * HID: sony: Add support for the Sony Motion ControllerFrank Praznik2015-05-071-2/+136
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a fixed-up HID descriptor for the Sony motion controller and enable controls for the LED light as well as force-feedback. The LED is multi-colored (red, green, blue). The motion controller has a single rumble motor so the higher of the left and right values is used to set the speed. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | | | | | | * HID: sony: Add the product ID for the Sony Motion ControllerFrank Praznik2015-05-072-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds the PID for the Sony motion controller to the hardware ID list. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | | | | | | * HID: sony: Prevent the freeing of an unitialized ida valueFrank Praznik2015-05-071-4/+4
| | | | | | |/ | | | | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sony_allocate_output_report() was being called before sony_set_device_id() which meant that an unallocated ida value was was freed if the output report allocation failed and the probe function jumped to err_stop. Do the device ID allocation before the output report allocation to avoid freeing an unallocated value in case of a failure. Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | | | | | * HID: sjoy: support Super Joy Box 4Sean Young2015-05-073-1/+4
| | | | | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This device supports force feedback and has two ports. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | | | * | HID: rmi: Disable populating F30 when the touchpad has physical buttonsAndrew Duggan2015-06-161-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Physical buttons do not use F30 to report their state and in some cases the data reported in F30 is incorrect and inconsistent with what is reported by the HID descriptor. When physical buttons are present, ignore F30 and let hid-input report buttons based on what is defined in the HID descriptor. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | | * | | HID: plantronics: Update to map volume up/down controlsTerry Junge2015-06-122-9/+130
| | | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update Kconfig with enhanced help text for hid-plantronics driver. Update hid-plantronics.c to identify device type and correctly map either the vendor unique or consumer control volume up/down usages to KEY_VOLUMEUP and KEY_VOLUMEDOWN events. Unmapped usages are ignored to prevent core mapping of unknown usages to random mouse events. Tested on ChromeBox/ChromeBook with various Plantronics devices. Signed-off-by: Terry Junge <terry.junge@plantronics.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * | | HID: lenovo: add support for Lenovo ThinkPad Keyboard Pro unitBenjamin Tissoires2015-05-073-0/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This dock is used with the Thinkpad Helix 2 but suffers from an error in the report descriptor where an usage max is 65535. Add a report fixup for it and make the keyboard working. Tested-by: Jonathan Oppenheim <lejono@gmail.com> Tested-by: John Reid <owlman.lists@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * | | HID: lenovo: set INPUT_PROP_POINTING_STICKAndreas Fleig2015-04-231-0/+19
| | | |/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Set flags INPUT_PROP_POINTER and INPUT_PROP_POINTING_STICK for the trackpoint integrated in Lenovo USB and Bluetooth keyboards. Libinput checks these flags to enable features such as middle-button-scrolling by default. Signed-off-by: Andreas Fleig <andreasfleig@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * | | HID: i2c-hid: Do not set the ACPI companion field in the HID deviceAndrew Duggan2015-06-031-1/+0Star
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The HID device does not need to know about the ACPI device associated with the underlying i2c device. Setting the ACPI companion field in the HID device also has the side effect of causing HID to be set as wake capable, since acpi_bind_one uses's the companion ACPI device's wakeup flags to set the device as wake capable. Which results in power/wakeup files in sysfs for the HID device which do not do anything. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Reviewed-by: Benson Leung <bleung@chromium.org> Tested-by: Benson Leung <bleung@chromium.org> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * | Merge branch 'for-linus' of ↵Linus Torvalds2015-05-226-24/+19Star
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: "Bugfixes for HID subsystem that should go in 4.1. Important highlights: - the patch that extended support for HID++ protocol for TK820 touchpad turns out to be causing regressions due to firmware issues; patch reverting back to basic support from Benjamin Tissoires - Wacom driver can oops for devices that report non-touch data on touch interfaces. Fix from Ping Cheng - gpiolib is not mandatory for i2c-hid, so the driver shouldn't fail if gpiolib is not enabled. Fix from Mika Westerberg" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: wacom: fix an Oops caused by wacom_wac_finger_count_touches HID: usbhid: Add HID_QUIRK_NOGET for Aten DVI KVM switch HID: hid-sensor-hub: Fix debug lock warning Revert "HID: logitech-hidpp: support combo keyboard touchpad TK820" HID: i2c-hid: Do not fail probing if gpiolib is not enabled
| * \ \ Merge branch 'for-linus' of ↵Linus Torvalds2015-04-151-1/+1
| |\ \ \ | | |_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem updates from Dmitry Torokhov: "You will get the following new drivers: - Qualcomm PM8941 power key drver - ChipOne icn8318 touchscreen controller driver - Broadcom iProc touchscreen and keypad drivers - Semtech SX8654 I2C touchscreen controller driver ALPS driver now supports newer SS4 devices; Elantech got a fix that should make it work on some ASUS laptops; and a slew of other enhancements and random fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (51 commits) Input: alps - non interleaved V2 dualpoint has separate stick button bits Input: alps - fix touchpad buttons getting stuck when used with trackpoint Input: atkbd - document "no new force-release quirks" policy Input: ALPS - make alps_get_pkt_id_ss4_v2() and others static Input: ALPS - V7 devices can report 5-finger taps Input: ALPS - add support for SS4 touchpad devices Input: ALPS - refactor alps_set_abs_params_mt() Input: elantech - fix absolute mode setting on some ASUS laptops Input: atmel_mxt_ts - split out touchpad initialisation logic Input: atmel_mxt_ts - implement support for T100 touch object Input: cros_ec_keyb - fix clearing keyboard state on wakeup Input: gscps2 - drop pci_ids dependency Input: synaptics - allocate 3 slots to keep stability in image sensors Input: Revert "Revert "synaptics - use dmax in input_mt_assign_slots"" Input: MT - make slot assignment work for overcovered solutions mfd: tc3589x: enforce device-tree only mode Input: tc3589x - localize platform data Input: tsc2007 - Convert msecs to jiffies only once Input: edt-ft5x06 - remove EV_SYN event report Input: edt-ft5x06 - allow to setting the maximum axes value through the DT ...
| | * | Merge tag 'v4.0-rc5' into nextDmitry Torokhov2015-03-2323-261/+715
| | |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Merge with the latest upstream to synchronize Synaptics changes and bring in new infrastructure pieces. Conflicts: drivers/input/mouse/synaptics.c
| | * | | Input: use more descriptive KEY_ROTATE_DISPLAY instead of KEY_DIRECTIONStefan Brüns2015-03-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| | | | |
| \ \ \ \
*-. \ \ \ \ Merge branches 'for-4.1/upstream-fixes', 'for-4.2/upstream' and ↵Jiri Kosina2015-06-2215-234/+583
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'for-4.2/logitech' into for-linus Conflicts: drivers/hid/hid-logitech-hidpp.c
| | * | | | | HID: hidpp: Add driver for mouse logitech M560Goffredo Baroncelli2015-06-011-3/+224
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Logitech M560 is a wireless mouse designed for windows 8 which uses the unifying receiver. Compared to a standard one, some buttons (the middle one and the two ones placed on the side) are bound to a key combination instead of a generating classic "mouse" button events. The device shows up as a mouse and keyboard combination: when the middle button is pressed it sends a key (as keyboard) combination, the same happens for the two side button. The left/right/wheel work as expected from a mouse. To complicate things further, the middle button sends different keys combinations between odd and even presses. In the "even" press it also sends a left click. But the worst thing is that no event is generated when the middle button is released. It is possible to re-configure the mouse sending a command (see function m560_send_config_command()). After this command the mouse sends some useful data when the buttons are pressed and/or released. [jkosina@suse.cz: fix build breakage due to leftover from previous patch version] Signed-off-by: Goffredo Baroncelli <kreijack@inwind.it> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * | | | | HID: Export hid_field_extract()Goffredo Baroncelli2015-06-011-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rename the function extract() to hid_field_extract(), make it external linkage to allow the use from other modules. Suggested-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Goffredo Baroncelli <kreijack@inwind.it> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * | | | | HID: hid-lg: Only one of LG_FF flags can be set for a given deviceMichal Malý2015-05-071-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Only one of LG_FF flags can be set for a given device. Signed-off-by: Michal Malý <madcatxster@devoid-pointer.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * | | | | HID: hid-lg4ff: Allow the driver to continue without sysfs interfaceMichal Malý2015-05-071-4/+3Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow the driver to continue without sysfs interface. Instead of bailing out allow the driver to continue in a degraded mode. Signed-off-by: Michal Malý <madcatxster@devoid-pointer.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * | | | | HID: hid-lg4ff: Constify members of lg4ff_device_entryMichal Malý2015-05-071-15/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Constify those members of lg4ff_device_entry struct whose value is not supposed to change. Signed-off-by: Michal Malý <madcatxster@devoid-pointer.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * | | | | HID: hid-lg4ff: Store pointer to the output HID report struct in the device ↵Michal Malý2015-05-071-35/+32Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | entry struct Store pointer to the output HID report struct in the device entry struct. This eliminates the need to look the HID report struct up every time it is needed. Signed-off-by: Michal Malý <madcatxster@devoid-pointer.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * | | | | HID: hid-lg4ff: Protect concurrent access to output HID reportMichal Malý2015-05-071-0/+110
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Protect concurrent access to output HID report with a spinlock. The HID report structure used to submit commands to wheels is shared amongst all functions that need to do so and some of these functions can be executed in parallel. Additionally, lg4ff_play() can be called from interrupt context by ff-memless module. Locking is necessary to prevent sending bogus data to the wheels. Signed-off-by: Michal Malý <madcatxster@devoid-pointer.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * | | | | HID: hid-lg4ff: Stop the hid device from lg4ffMichal Malý2015-05-072-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Stop the hid device from lg4ff. Originally hid-lg was responsible for stopping of the device. Signed-off-by: Michal Malý <madcatxster@devoid-pointer.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>