summaryrefslogtreecommitdiffstats
path: root/drivers/hwmon
Commit message (Collapse)AuthorAgeFilesLines
* hwmon: (nct7802) Fix wrong detection of in4 presenceGuenter Roeck2019-08-161-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | commit 38ada2f406a9b81fb1249c5c9227fa657e7d5671 upstream. The code to detect if in4 is present is wrong; if in4 is not present, the in4_input sysfs attribute is still present. In detail: - Ihen RTD3_MD=11 (VSEN3 present), everything is as expected (no bug). - If we have RTD3_MD!=11 (no VSEN3), we unexpectedly have a in4_input file under /sys and the "sensors" command displays in4_input. But as expected, we have no in4_min, in4_max, in4_alarm, in4_beep. Fix is_visible function to detect and report in4_input visibility as expected. Reported-by: Gilles Buloz <Gilles.Buloz@kontron.com> Cc: Gilles Buloz <Gilles.Buloz@kontron.com> Cc: stable@vger.kernel.org Fixes: 3434f37835804 ("hwmon: Driver for Nuvoton NCT7802Y") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* hwmon: (nct6775) Fix register address and added missed tolerance for nct6106Björn Gerhart2019-08-161-1/+2
| | | | | | | | | | | | [ Upstream commit f3d43e2e45fd9d44ba52d20debd12cd4ee9c89bf ] Fixed address of third NCT6106_REG_WEIGHT_DUTY_STEP, and added missed NCT6106_REG_TOLERANCE_H. Fixes: 6c009501ff200 ("hwmon: (nct6775) Add support for NCT6102D/6106D") Signed-off-by: Bjoern Gerhart <gerhart@posteo.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* hwmon: (pmbus/core) Treat parameters as paged if on multiple pagesRobert Hancock2019-06-251-4/+30
| | | | | | | | | | | | | | | | | | | | [ Upstream commit 4a60570dce658e3f8885bbcf852430b99f65aca5 ] Some chips have attributes which exist on more than one page but the attribute is not presently marked as paged. This causes the attributes to be generated with the same label, which makes it impossible for userspace to tell them apart. Marking all such attributes as paged would result in the page suffix being added regardless of whether they were present on more than one page or not, which might break existing setups. Therefore, we add a second check which treats the attribute as paged, even if not marked as such, if it is present on multiple pages. Fixes: b4ce237b7f7d ("hwmon: (pmbus) Introduce infrastructure to detect sensors and limit registers") Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* hwmon: (core) add thermal sensors only if dev->of_node is presentEduardo Valentin2019-06-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit c41dd48e21fae3e55b3670ccf2eb562fc1f6a67d ] Drivers may register to hwmon and request for also registering with the thermal subsystem (HWMON_C_REGISTER_TZ). However, some of these driver, e.g. marvell phy, may be probed from Device Tree or being dynamically allocated, and in the later case, it will not have a dev->of_node entry. Registering with hwmon without the dev->of_node may result in different outcomes depending on the device tree, which may be a bit misleading. If the device tree blob has no 'thermal-zones' node, the *hwmon_device_register*() family functions are going to gracefully succeed, because of-thermal, *thermal_zone_of_sensor_register() return -ENODEV in this case, and the hwmon error path handles this error code as success to cover for the case where CONFIG_THERMAL_OF is not set. However, if the device tree blob has the 'thermal-zones' entry, the *hwmon_device_register*() will always fail on callers with no dev->of_node, propagating -EINVAL. If dev->of_node is not present, calling of-thermal does not make sense. For this reason, this patch checks first if the device has a of_node before going over the process of registering with the thermal subsystem of-thermal interface. And in this case, when a caller of *hwmon_device_register*() with HWMON_C_REGISTER_TZ and no dev->of_node will still register with hwmon, but not with the thermal subsystem. If all the hwmon part bits are in place, the registration will succeed. Fixes: d560168b5d0f ("hwmon: (core) New hwmon registration API") Cc: Jean Delvare <jdelvare@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: linux-hwmon@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <eduval@amazon.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* hwmon: (f71805f) Use request_muxed_region for Super-IO accessesGuenter Roeck2019-05-311-3/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 73e6ff71a7ea924fb7121d576a2d41e3be3fc6b5 ] Super-IO accesses may fail on a system with no or unmapped LPC bus. Unable to handle kernel paging request at virtual address ffffffbffee0002e pgd = ffffffc1d68d4000 [ffffffbffee0002e] *pgd=0000000000000000, *pud=0000000000000000 Internal error: Oops: 94000046 [#1] PREEMPT SMP Modules linked in: f71805f(+) hwmon CPU: 3 PID: 1659 Comm: insmod Not tainted 4.5.0+ #88 Hardware name: linux,dummy-virt (DT) task: ffffffc1f6665400 ti: ffffffc1d6418000 task.ti: ffffffc1d6418000 PC is at f71805f_find+0x6c/0x358 [f71805f] Also, other drivers may attempt to access the LPC bus at the same time, resulting in undefined behavior. Use request_muxed_region() to ensure that IO access on the requested address space is supported, and to ensure that access by multiple drivers is synchronized. Fixes: e53004e20a58e ("hwmon: New f71805f driver") Reported-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reported-by: John Garry <john.garry@huawei.com> Cc: John Garry <john.garry@huawei.com> Acked-by: John Garry <john.garry@huawei.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* hwmon: (pc87427) Use request_muxed_region for Super-IO accessesGuenter Roeck2019-05-311-1/+13
| | | | | | | | | | | | | | | | | | | | | [ Upstream commit 755a9b0f8aaa5639ba5671ca50080852babb89ce ] Super-IO accesses may fail on a system with no or unmapped LPC bus. Also, other drivers may attempt to access the LPC bus at the same time, resulting in undefined behavior. Use request_muxed_region() to ensure that IO access on the requested address space is supported, and to ensure that access by multiple drivers is synchronized. Fixes: ba224e2c4f0a7 ("hwmon: New PC87427 hardware monitoring driver") Reported-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reported-by: John Garry <john.garry@huawei.com> Cc: John Garry <john.garry@huawei.com> Acked-by: John Garry <john.garry@huawei.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* hwmon: (smsc47b397) Use request_muxed_region for Super-IO accessesGuenter Roeck2019-05-311-2/+11
| | | | | | | | | | | | | | | | | | | | | [ Upstream commit 8c0826756744c0ac1df600a5e4cca1a341b13101 ] Super-IO accesses may fail on a system with no or unmapped LPC bus. Also, other drivers may attempt to access the LPC bus at the same time, resulting in undefined behavior. Use request_muxed_region() to ensure that IO access on the requested address space is supported, and to ensure that access by multiple drivers is synchronized. Fixes: 8d5d45fb1468 ("I2C: Move hwmon drivers (2/3)") Reported-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reported-by: John Garry <john.garry@huawei.com> Cc: John Garry <john.garry@huawei.com> Acked-by: John Garry <john.garry@huawei.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* hwmon: (smsc47m1) Use request_muxed_region for Super-IO accessesGuenter Roeck2019-05-311-9/+19
| | | | | | | | | | | | | | | | | | | | | [ Upstream commit d6410408ad2a798c4cc685252c1baa713be0ad69 ] Super-IO accesses may fail on a system with no or unmapped LPC bus. Also, other drivers may attempt to access the LPC bus at the same time, resulting in undefined behavior. Use request_muxed_region() to ensure that IO access on the requested address space is supported, and to ensure that access by multiple drivers is synchronized. Fixes: 8d5d45fb1468 ("I2C: Move hwmon drivers (2/3)") Reported-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reported-by: John Garry <john.garry@huawei.com> Cc: John Garry <john.garry@huawei.com> Acked-by: John Garry <john.garry@huawei.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* hwmon: (vt1211) Use request_muxed_region for Super-IO accessesGuenter Roeck2019-05-311-3/+12
| | | | | | | | | | | | | | | | | [ Upstream commit 14b97ba5c20056102b3dd22696bf17b057e60976 ] Super-IO accesses may fail on a system with no or unmapped LPC bus. Also, other drivers may attempt to access the LPC bus at the same time, resulting in undefined behavior. Use request_muxed_region() to ensure that IO access on the requested address space is supported, and to ensure that access by multiple drivers is synchronized. Fixes: 2219cd81a6cd ("hwmon/vt1211: Add probing of alternate config index port") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* hwmon: (pwm-fan) Disable PWM if fetching cooling data failsStefan Wahren2019-05-161-1/+1
| | | | | | | | | | | | | | | commit 53f1647da3e8fb3e89066798f0fdc045064d353d upstream. In case pwm_fan_of_get_cooling_data() fails we should disable the PWM just like in the other error cases. Fixes: 2e5219c77183 ("hwmon: (pwm-fan) Read PWM FAN configuration from device tree") Cc: <stable@vger.kernel.org> # 4.14+ Reported-by: Guenter Rock <linux@roeck-us.net> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* hwmon: (w83773g) Select REGMAP_I2C to fix build errorAxel Lin2019-04-171-0/+1
| | | | | | | | | | | | | | commit a165dcc923ada2ffdee1d4f41f12f81b66d04c55 upstream. Select REGMAP_I2C to avoid below build error: ERROR: "__devm_regmap_init_i2c" [drivers/hwmon/w83773g.ko] undefined! Fixes: ee249f271524 ("hwmon: Add W83773G driver") Cc: stable@vger.kernel.org Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* hwmon: (tmp421) Correct the misspelling of the tmp442 compatible attribute ↵Cheng-Min Ao2019-02-271-1/+1
| | | | | | | | | | | | | | in OF device ID table [ Upstream commit f422449b58548a41e98fc97b259a283718e527db ] Correct a typo in OF device ID table The last one should be 'ti,tmp442' Signed-off-by: Cheng-Min Ao <tony_ao@wiwynn.com> Signed-off-by: Yu-Hsiang Chen <matt_chen@wiwynn.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* hwmon: (lm80) Fix missing unlock on error in set_fan_div()Wei Yongjun2019-02-231-1/+3
| | | | | | | | | | | | | commit 07bd14ccc3049f9c0147a91a4227a571f981601a upstream. Add the missing unlock before return from function set_fan_div() in the error handling case. Fixes: c9c63915519b ("hwmon: (lm80) fix a missing check of the status of SMBus read") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* hwmon: (lm80) fix a missing check of bus read in lm80 probeKangjie Lu2019-02-121-2/+9
| | | | | | | | | | | | | | | [ Upstream commit 9aa3aa15f4c2f74f47afd6c5db4b420fadf3f315 ] In lm80_probe(), if lm80_read_value() fails, it returns a negative error number which is stored to data->fan[f_min] and will be further used. We should avoid using the data if the read fails. The fix checks if lm80_read_value() fails, and if so, returns with the error number. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* hwmon: (lm80) fix a missing check of the status of SMBus readKangjie Lu2019-02-121-5/+10
| | | | | | | | | | | | | | | | [ Upstream commit c9c63915519b1def7043b184680f33c24cd49d7b ] If lm80_read_value() fails, it returns a negative number instead of the correct read data. Therefore, we should avoid using the data if it fails. The fix checks if lm80_read_value() fails, and if so, returns with the error number. Signed-off-by: Kangjie Lu <kjlu@umn.edu> [groeck: One variable for return values is enough] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* hwmon: (w83795) temp4_type has writable permissionHuacai Chen2018-12-171-1/+1
| | | | | | | | | | | | | [ Upstream commit 09aaf6813cfca4c18034fda7a43e68763f34abb1 ] Both datasheet and comments of store_temp_mode() tell us that temp1~4_type is writable, so fix it. Signed-off-by: Yao Wang <wangyao@lemote.com> Signed-off-by: Huacai Chen <chenhc@lemote.com> Fixes: 39deb6993e7c (" hwmon: (w83795) Simplify temperature sensor type handling") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* hwmon: (mlxreg-fan) Fix macros for tacho fault readingVadim Pasternak2018-12-171-1/+1
| | | | | | | | | | | | | | [ Upstream commit 243cfe3fb8978c7eec24511aba7dac98819ed896 ] Fix macros for tacometer fault reading. This fix is relevant for three Mellanox systems MQMB7, MSN37, MSN34, which are about to be released to the customers. At the moment, none of them is at customers sites. Fixes: 65afb4c8e7e4 ("hwmon: (mlxreg-fan) Add support for Mellanox FAN driver") Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* hwmon: (ina2xx) Fix current value calculationNicolin Chen2018-12-171-1/+1
| | | | | | | | | | | | | | | | | [ Upstream commit 38cd989ee38c16388cde89db5b734f9d55b905f9 ] The current register (04h) has a sign bit at MSB. The comments for this calculation also mention that it's a signed register. However, the regval is unsigned type so result of calculation turns out to be an incorrect value when current is negative. This patch simply fixes this by adding a casting to s16. Fixes: 5d389b125186c ("hwmon: (ina2xx) Make calibration register value fixed") Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* hwmon: (raspberrypi) Fix initial notifyStefan Wahren2018-12-171-6/+0Star
| | | | | | | | | | | | | | [ Upstream commit 35fdc3902179366489a12cae4cb3ccc3b95f0afe ] In case an under-voltage happens before probing the driver wont write the critical warning into the kernel log. So don't init of last_throttled during probe and fix this issue. Fixes: 74d1e007915f ("hwmon: Add support for RPi voltage sensor") Reported-by: "Noralf Trønnes" <noralf@tronnes.org> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* hwmon (ina2xx) Fix NULL id pointer in probe()Nicolin Chen2018-12-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 70df9ebbd82c794ddfbb49d45b337f18d5588dc2 ] When using DT configurations, the id pointer might turn out to be NULL. Then the driver encounters NULL pointer access: Unable to handle kernel read from unreadable memory at vaddr 00000018 [...] PC is at ina2xx_probe+0x114/0x200 LR is at ina2xx_probe+0x10c/0x200 [...] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b The reason is that i2c core returns the id pointer by matching id_table with client->name, while the client->name is actually using the name from the first string in the DT compatible list, not the best one. So i2c core would fail to match the id_table if the best matched compatible string isn't the first one, and then would return a NULL id pointer. This probably should be fixed in i2c core. But it doesn't hurt to make the driver robust. So this patch fixes it by using the "chip" that's added to unify both DT and non-DT configurations. Additionally, since id pointer could be null, so as id->name: ina2xx 10-0047: power monitor (null) (Rshunt = 1000 uOhm) ina2xx 10-0048: power monitor (null) (Rshunt = 10000 uOhm) So this patch also fixes NULL name pointer, using client->name to play safe and to align with hwmon->name. Fixes: bd0ddd4d0883 ("hwmon: (ina2xx) Add OF device ID table") Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* hwmon: (ibmpowernv) Remove bogus __init annotationsGeert Uytterhoeven2018-11-271-4/+3Star
| | | | | | | | | | | | | | | | | | | [ Upstream commit e3e61f01d755188cb6c2dcf5a244b9c0937c258e ] If gcc decides not to inline make_sensor_label(): WARNING: vmlinux.o(.text+0x4df549c): Section mismatch in reference from the function .create_device_attrs() to the function .init.text:.make_sensor_label() The function .create_device_attrs() references the function __init .make_sensor_label(). This is often because .create_device_attrs lacks a __init annotation or the annotation of .make_sensor_label is wrong. As .probe() can be called after freeing of __init memory, all __init annotiations in the driver are bogus, and should be removed. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* hwmon: (core) Fix double-free in __hwmon_device_register()Dmitry Osipenko2018-11-211-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 74e3512731bd5c9673176425a76a7cc5efa8ddb6 upstream. Fix double-free that happens when thermal zone setup fails, see KASAN log below. ================================================================== BUG: KASAN: double-free or invalid-free in __hwmon_device_register+0x5dc/0xa7c CPU: 0 PID: 132 Comm: kworker/0:2 Tainted: G B 4.19.0-rc8-next-20181016-00042-gb52cd80401e9-dirty #41 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) Workqueue: events deferred_probe_work_func Backtrace: [<c0110540>] (dump_backtrace) from [<c0110944>] (show_stack+0x20/0x24) [<c0110924>] (show_stack) from [<c105cb08>] (dump_stack+0x9c/0xb0) [<c105ca6c>] (dump_stack) from [<c02fdaec>] (print_address_description+0x68/0x250) [<c02fda84>] (print_address_description) from [<c02fd4ac>] (kasan_report_invalid_free+0x68/0x88) [<c02fd444>] (kasan_report_invalid_free) from [<c02fc85c>] (__kasan_slab_free+0x1f4/0x200) [<c02fc668>] (__kasan_slab_free) from [<c02fd0c0>] (kasan_slab_free+0x14/0x18) [<c02fd0ac>] (kasan_slab_free) from [<c02f9c6c>] (kfree+0x90/0x294) [<c02f9bdc>] (kfree) from [<c0b41bbc>] (__hwmon_device_register+0x5dc/0xa7c) [<c0b415e0>] (__hwmon_device_register) from [<c0b421e8>] (hwmon_device_register_with_info+0xa0/0xa8) [<c0b42148>] (hwmon_device_register_with_info) from [<c0b42324>] (devm_hwmon_device_register_with_info+0x74/0xb4) [<c0b422b0>] (devm_hwmon_device_register_with_info) from [<c0b4481c>] (lm90_probe+0x414/0x578) [<c0b44408>] (lm90_probe) from [<c0aeeff4>] (i2c_device_probe+0x35c/0x384) [<c0aeec98>] (i2c_device_probe) from [<c08776cc>] (really_probe+0x290/0x3e4) [<c087743c>] (really_probe) from [<c0877a2c>] (driver_probe_device+0x80/0x1c4) [<c08779ac>] (driver_probe_device) from [<c0877da8>] (__device_attach_driver+0x104/0x11c) [<c0877ca4>] (__device_attach_driver) from [<c0874dd8>] (bus_for_each_drv+0xa4/0xc8) [<c0874d34>] (bus_for_each_drv) from [<c08773b0>] (__device_attach+0xf0/0x15c) [<c08772c0>] (__device_attach) from [<c0877e24>] (device_initial_probe+0x1c/0x20) [<c0877e08>] (device_initial_probe) from [<c08762f4>] (bus_probe_device+0xdc/0xec) [<c0876218>] (bus_probe_device) from [<c0876a08>] (deferred_probe_work_func+0xa8/0xd4) [<c0876960>] (deferred_probe_work_func) from [<c01527c4>] (process_one_work+0x3dc/0x96c) [<c01523e8>] (process_one_work) from [<c01541e0>] (worker_thread+0x4ec/0x8bc) [<c0153cf4>] (worker_thread) from [<c015b238>] (kthread+0x230/0x240) [<c015b008>] (kthread) from [<c01010bc>] (ret_from_fork+0x14/0x38) Exception stack(0xcf743fb0 to 0xcf743ff8) 3fa0: 00000000 00000000 00000000 00000000 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 Allocated by task 132: kasan_kmalloc.part.1+0x58/0xf4 kasan_kmalloc+0x90/0xa4 kmem_cache_alloc_trace+0x90/0x2a0 __hwmon_device_register+0xbc/0xa7c hwmon_device_register_with_info+0xa0/0xa8 devm_hwmon_device_register_with_info+0x74/0xb4 lm90_probe+0x414/0x578 i2c_device_probe+0x35c/0x384 really_probe+0x290/0x3e4 driver_probe_device+0x80/0x1c4 __device_attach_driver+0x104/0x11c bus_for_each_drv+0xa4/0xc8 __device_attach+0xf0/0x15c device_initial_probe+0x1c/0x20 bus_probe_device+0xdc/0xec deferred_probe_work_func+0xa8/0xd4 process_one_work+0x3dc/0x96c worker_thread+0x4ec/0x8bc kthread+0x230/0x240 ret_from_fork+0x14/0x38 (null) Freed by task 132: __kasan_slab_free+0x12c/0x200 kasan_slab_free+0x14/0x18 kfree+0x90/0x294 hwmon_dev_release+0x1c/0x20 device_release+0x4c/0xe8 kobject_put+0xac/0x11c device_unregister+0x2c/0x30 __hwmon_device_register+0xa58/0xa7c hwmon_device_register_with_info+0xa0/0xa8 devm_hwmon_device_register_with_info+0x74/0xb4 lm90_probe+0x414/0x578 i2c_device_probe+0x35c/0x384 really_probe+0x290/0x3e4 driver_probe_device+0x80/0x1c4 __device_attach_driver+0x104/0x11c bus_for_each_drv+0xa4/0xc8 __device_attach+0xf0/0x15c device_initial_probe+0x1c/0x20 bus_probe_device+0xdc/0xec deferred_probe_work_func+0xa8/0xd4 process_one_work+0x3dc/0x96c worker_thread+0x4ec/0x8bc kthread+0x230/0x240 ret_from_fork+0x14/0x38 (null) Cc: <stable@vger.kernel.org> # v4.15+ Fixes: 47c332deb8e8 ("hwmon: Deal with errors from the thermal subsystem") Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* hwmon: (pwm-fan) Set fan speed to 0 on suspendThierry Reding2018-11-131-1/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 95dcd64bc5a27080beaa344edfe5bdcca3d2e7dc ] Technically this is not required because disabling the PWM should be enough. However, when support for atomic operations was implemented in the PWM subsystem, only actual changes to the PWM channel are applied during pwm_config(), which means that during after resume from suspend the old settings won't be applied. One possible solution is for the PWM driver to implement its own PM operations such that settings from before suspend get applied on resume. This has the disadvantage of completely ignoring any particular ordering requirements that PWM user drivers might have, so it is best to leave it up to the user drivers to apply the settings that they want at the appropriate time. Another way to solve this would be to read back the current state of the PWM at the time of resume. That way, in case the configuration was lost during suspend, applying the old settings in PWM user drivers would actually get them applied because they differ from the current settings. However, not all PWM drivers support reading the hardware state, and not all hardware may support it. The best workaround at this point seems to be to let PWM user drivers tell the PWM subsystem that the PWM is turned off by, in addition to disabling it, also setting the duty cycle to 0. This causes the resume operation to apply a configuration that is different from the current configuration, resulting in the proper state from before suspend getting restored. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* hwmon: (pmbus) Fix page count auto-detection.Dmitry Bazhenov2018-11-132-1/+6
| | | | | | | | | | | | | | | | | | | | commit e7c6a55606b5c46b449d76588968b4d8caae903f upstream. Devices with compatible="pmbus" field have zero initial page count, and pmbus_clear_faults() being called before the page count auto- detection does not actually clear faults because it depends on the page count. Non-cleared faults in its turn may fail the subsequent page count auto-detection. This patch fixes this problem by calling pmbus_clear_fault_page() for currently set page and calling pmbus_clear_faults() after the page count was detected. Cc: stable@vger.kernel.org Signed-off-by: Dmitry Bazhenov <bazhenov.dn@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'alloc-args-v4.19-rc8' of ↵Greg Kroah-Hartman2018-10-111-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Kees writes: "Fix open-coded multiplication arguments to allocators - Fixes several new open-coded multiplications added in the 4.19 merge window." * tag 'alloc-args-v4.19-rc8' of https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: treewide: Replace more open-coded allocation size multiplications
| * treewide: Replace more open-coded allocation size multiplicationsKees Cook2018-10-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | As done treewide earlier, this catches several more open-coded allocation size calculations that were added to the kernel during the merge window. This performs the following mechanical transformations using Coccinelle: kvmalloc(a * b, ...) -> kvmalloc_array(a, b, ...) kvzalloc(a * b, ...) -> kvcalloc(a, b, ...) devm_kzalloc(..., a * b, ...) -> devm_kcalloc(..., a, b, ...) Signed-off-by: Kees Cook <keescook@chromium.org>
* | Merge tag 'hwmon-for-linus-v4.19-rc5' of ↵Greg Kroah-Hartman2018-09-191-23/+49
|\ \ | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Guenter writes: "Various bug fixes for nct6775 driver"
| * | hwmon: (nct6775) Use different register to get fan RPM for fan7Guenter Roeck2018-09-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The documented register to retrieve the fan RPM for fan7 is found to be unreliable at least with NCT6796D revision 3. Let's use register 0x4ce instead. This is undocumented for NCT6796D, but documented for NCT6797D and NCT6798D and known to be working. Reported-by: Robert Kern <ulteq@web.de> Cc: Robert Kern <ulteq@web.de> Fixes: 81820059a428 ("hwmon: (nct6775) Add support for NCT6796D") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
| * | hwmon: (nct6775) Fix RPM output for fan7 on NCT6796DGuenter Roeck2018-09-161-4/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | fan7 on NCT6796D does not have a fan count register; it only has an RPM register. Switch to using RPM registers to read the fan speed for all chips supporting it to solve the problem for good. Reported-by: Robert Kern <ulteq@web.de> Cc: Robert Kern <ulteq@web.de> Fixes: 81820059a428 ("hwmon: (nct6775) Add support for NCT6796D") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
| * | hwmon: (nct6775) Fix virtual temperature sources for NCT6796DGuenter Roeck2018-09-151-6/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following kernel log message is reported for the nct6775 driver on ASUS WS X299 SAGE. nct6775: Found NCT6796D or compatible chip at 0x2e:0x290 nct6775 nct6775.656: Invalid temperature source 11 at index 0, source register 0x100, temp register 0x73 nct6775 nct6775.656: Invalid temperature source 11 at index 2, source register 0x300, temp register 0x77 nct6775 nct6775.656: Invalid temperature source 11 at index 3, source register 0x800, temp register 0x79 nct6775 nct6775.656: Invalid temperature source 11 at index 4, source register 0x900, temp register 0x7b A recent version of the datasheet lists temperature source 11 as reserved. However, an older version of the datasheet lists temperature sources 10 and 11 as supported virtual temperature sources. Apparently the older version of the datasheet is correct, so list those temperature sources as supported. Virtual temperature sources are different than other temperature sources: Values are not read from a temperature sensor, but written either from BIOS or an embedded controller. As such, each virtual temperature has to be reported. Since there is now more than one temperature source, we have to keep virtual temperature sources in a chip-specific mask and can no longer rely on the assumption that there is only one virtual temperature source with a fixed index. This accounts for most of the complexity of this patch. Reported-by: Robert Kern <ulteq@web.de> Cc: Robert Kern <ulteq@web.de> Fixes: 81820059a428 ("hwmon: (nct6775) Add support for NCT6796D") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
| * | hwmon: (nct6775) Fix access to fan pulse registersGuenter Roeck2018-09-071-11/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Not all fans have a fan pulse register. This can result in reading beyond the end of REG_FAN_PULSES and FAN_PULSE_SHIFT arrays, and was reported by smatch as possible error. 1672 for (i = 0; i < ARRAY_SIZE(data->rpm); i++) { ^^^^^^^^^^^^^^^^^^^^^^^^ This is a 7 element array. ... 1685 data->fan_pulses[i] = 1686 (nct6775_read_value(data, data->REG_FAN_PULSES[i]) 1687 >> data->FAN_PULSE_SHIFT[i]) & 0x03; ^^^^^^^^^^^^^^^^^^^^^^^^ FAN_PULSE_SHIFT is either 5 or 6 elements. To fix the problem, we have to ensure that all REG_FAN_PULSES and FAN_PULSE_SHIFT have the appropriate length, and that REG_FAN_PULSES is only read if the register actually exists. Fixes: 6c009501ff200 ("hwmon: (nct6775) Add support for NCT6102D/6106D") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
| * | hwmon: (nct6775) Set weight source to zero correctlyDan Carpenter2018-09-051-1/+1
| |/ | | | | | | | | | | | | | | | | This is dead code because j can never be 1 at this point. We had intended to just test if the bit was clear. Fixes: bbd8decd4123 ("hwmon: (nct6775) Add support for weighted fan control") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* | Merge tag 'armsoc-fixes' of ↵Linus Torvalds2018-09-091-0/+1
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A few more fixes who have trickled in: - MMC bus width fixup for some Allwinner platforms - Fix for NULL deref in ti-aemif when no platform data is passed in - Fix div by 0 in SCMI code - Add a missing module alias in a new RPi driver" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: memory: ti-aemif: fix a potential NULL-pointer dereference firmware: arm_scmi: fix divide by zero when sustained_perf_level is zero hwmon: rpi: add module alias to raspberrypi-hwmon arm64: allwinner: dts: h6: fix Pine H64 MMC bus width
| * hwmon: rpi: add module alias to raspberrypi-hwmonPeter Robinson2018-09-051-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The raspberrypi-hwmon driver doesn't automatically load, although it does work when loaded, by adding the alias it auto loads as expected when built as a module. Tested on RPi2/RPi3 on 32 bit kernel and RPi3B+ on aarch64 with Fedora 28 and a patched 4.18 RC kernel. Fixes: 3c493c885cf ("hwmon: Add support for RPi voltage sensor") Signed-off-by: Peter Robinson <pbrobinson@gmail.com> CC: Stefan Wahren <stefan.wahren@i2se.com> CC: Eric Anholt <eric@anholt.net> Acked-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* | hwmon: (nct6775) Fix potential Spectre v1Gustavo A. R. Silva2018-08-271-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | val can be indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: vers/hwmon/nct6775.c:2698 store_pwm_weight_temp_sel() warn: potential spectre issue 'data->temp_src' [r] Fix this by sanitizing val before using it to index data->temp_src Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* | hwmon: (adt7475) Make adt7475_read_word() return errorsDan Carpenter2018-08-271-5/+9
| | | | | | | | | | | | | | | | | | The adt7475_read_word() function was meant to return negative error codes on failure. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Tokunori Ikegami <ikegami@allied-telesis.co.jp> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* | hwmon: (adt7475) Potential error pointer dereferencesDan Carpenter2018-08-271-3/+8
| | | | | | | | | | | | | | | | | | | | | | | | The adt7475_update_device() function returns error pointers. The problem is that in show_pwmfreq() we dereference it before the check. And then in pwm_use_point2_pwm_at_crit_show() there isn't a check at all. I don't know if it's required, but it silences a static checker warning and it's doesn't hurt anything to check. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Tokunori Ikegami <ikegami@allied-telesis.co.jp> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* | hwmon: (ina2xx) fix sysfs shunt resistor read accessLothar Felten2018-08-271-2/+11
|/ | | | | | | | | | fix the sysfs shunt resistor read access: return the shunt resistor value, not the calibration register contents. update email address Signed-off-by: Lothar Felten <lothar.felten@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* Merge tag 'armsoc-drivers' of ↵Linus Torvalds2018-08-233-0/+177
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "Some of the larger changes this merge window: - Removal of drivers for Exynos5440, a Samsung SoC that never saw widespread use. - Uniphier support for USB3 and SPI reset handling - Syste control and SRAM drivers and bindings for Allwinner platforms - Qualcomm AOSS (Always-on subsystem) reset controller drivers - Raspberry Pi hwmon driver for voltage - Mediatek pwrap (pmic) support for MT6797 SoC" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (52 commits) drivers/firmware: psci_checker: stash and use topology_core_cpumask for hotplug tests soc: fsl: cleanup Kconfig menu soc: fsl: dpio: Convert DPIO documentation to .rst staging: fsl-mc: Remove remaining files staging: fsl-mc: Move DPIO from staging to drivers/soc/fsl staging: fsl-dpaa2: eth: move generic FD defines to DPIO soc: fsl: qe: gpio: Add qe_gpio_set_multiple usb: host: exynos: Remove support for Exynos5440 clk: samsung: Remove support for Exynos5440 soc: sunxi: Add the A13, A23 and H3 system control compatibles reset: uniphier: add reset control support for SPI cpufreq: exynos: Remove support for Exynos5440 ata: ahci-platform: Remove support for Exynos5440 soc: imx6qp: Use GENPD_FLAG_ALWAYS_ON for PU errata soc: mediatek: pwrap: add mt6351 driver for mt6797 SoCs soc: mediatek: pwrap: add pwrap driver for mt6797 SoCs soc: mediatek: pwrap: fix cipher init setting error dt-bindings: pwrap: mediatek: add pwrap support for MT6797 reset: uniphier: add USB3 core reset control dt-bindings: reset: uniphier: add USB3 core reset support ...
| * Merge tag 'arm-soc/for-4.19/drivers' of https://github.com/Broadcom/stblinux ↵Olof Johansson2018-07-143-0/+177
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into next/drivers This pull request contains Broadcom ARM/ARM64/MIPS SoCs drivers changes for 4.19, please pull the following: - Doug updates the low-level suspend/resume code for ARM SoCs to support the latest rev B3.0 memory controllers found on newer chips with an appropriate match structure to perform the correct entry sequencing - Florian updates the Device Tree binding document for these memory controllers to list all possible compatible strings that exist given the supported memory controllers. - Stefan adds the GET_THROTTLED firmware property value that is required for the Rasperry Pi voltage monitoring driver and updates the Raspberry Pi firmware driver accordingly to register such a device using the HWMON subsystem. Finally he adds support for reporting under voltage conditions using a specialized HWMON driver. * tag 'arm-soc/for-4.19/drivers' of https://github.com/Broadcom/stblinux: firmware: raspberrypi: Remove VLA usage firmware: raspberrypi: Register hwmon driver hwmon: Add support for RPi voltage sensor soc: bcm: brcmstb: Add missing DDR MEMC compatible strings soc: bcm: brcmstb: pm: Add support for newer rev B3.0 controllers ARM: bcm2835: Add GET_THROTTLED firmware property Signed-off-by: Olof Johansson <olof@lixom.net>
| | * hwmon: Add support for RPi voltage sensorStefan Wahren2018-07-093-0/+177
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently there is no easy way to detect undervoltage conditions on a remote Raspberry Pi. This hwmon driver retrieves the state of the undervoltage sensor via mailbox interface. The handling based on Noralf's modifications to the downstream firmware driver. In case of an undervoltage condition only an entry is written to the kernel log. CC: "Noralf Trønnes" <noralf@tronnes.org> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Guenter Roeck <linux@roeck-us.net>
* | | Merge tag 'char-misc-4.19-rc1' of ↵Linus Torvalds2018-08-182-0/+2
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the bit set of char/misc drivers for 4.19-rc1 There is a lot here, much more than normal, seems like everyone is writing new driver subsystems these days... Anyway, major things here are: - new FSI driver subsystem, yet-another-powerpc low-level hardware bus - gnss, finally an in-kernel GPS subsystem to try to tame all of the crazy out-of-tree drivers that have been floating around for years, combined with some really hacky userspace implementations. This is only for GNSS receivers, but you have to start somewhere, and this is great to see. Other than that, there are new slimbus drivers, new coresight drivers, new fpga drivers, and loads of DT bindings for all of these and existing drivers. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits) android: binder: Rate-limit debug and userspace triggered err msgs fsi: sbefifo: Bump max command length fsi: scom: Fix NULL dereference misc: mic: SCIF Fix scif_get_new_port() error handling misc: cxl: changed asterisk position genwqe: card_base: Use true and false for boolean values misc: eeprom: assignment outside the if statement uio: potential double frees if __uio_register_device() fails eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency misc: ti-st: Fix memory leak in the error path of probe() android: binder: Show extra_buffers_size in trace firmware: vpd: Fix section enabled flag on vpd_section_destroy platform: goldfish: Retire pdev_bus goldfish: Use dedicated macros instead of manual bit shifting goldfish: Add missing includes to goldfish.h mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux dt-bindings: mux: add adi,adgs1408 Drivers: hv: vmbus: Cleanup synic memory free path Drivers: hv: vmbus: Remove use of slow_virt_to_phys() Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind() ...
| * | | headers: separate linux/mod_devicetable.h from linux/platform_device.hRandy Dunlap2018-07-072-0/+2
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At over 4000 #includes, <linux/platform_device.h> is the 9th most #included header file in the Linux kernel. It does not need <linux/mod_devicetable.h>, so drop that header and explicitly add <linux/mod_devicetable.h> to source files that need it. 4146 #include <linux/platform_device.h> After this patch, there are 225 files that use <linux/mod_devicetable.h>, for a reduction of around 3900 times that <linux/mod_devicetable.h> does not have to be read & parsed. 225 #include <linux/mod_devicetable.h> This patch was build-tested on 20 different arch-es. It also makes these drivers SubmitChecklist#1 compliant. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kbuild test robot <lkp@intel.com> # drivers/media/platform/vimc/ Reported-by: kbuild test robot <lkp@intel.com> # drivers/pinctrl/pinctrl-u300.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | Merge tag 'powerpc-4.19-1' of ↵Linus Torvalds2018-08-171-32/+206
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Notable changes: - A fix for a bug in our page table fragment allocator, where a page table page could be freed and reallocated for something else while still in use, leading to memory corruption etc. The fix reuses pt_mm in struct page (x86 only) for a powerpc only refcount. - Fixes to our pkey support. Several are user-visible changes, but bring us in to line with x86 behaviour and/or fix outright bugs. Thanks to Florian Weimer for reporting many of these. - A series to improve the hvc driver & related OPAL console code, which have been seen to cause hardlockups at times. The hvc driver changes in particular have been in linux-next for ~month. - Increase our MAX_PHYSMEM_BITS to 128TB when SPARSEMEM_VMEMMAP=y. - Remove Power8 DD1 and Power9 DD1 support, neither chip should be in use anywhere other than as a paper weight. - An optimised memcmp implementation using Power7-or-later VMX instructions - Support for barrier_nospec on some NXP CPUs. - Support for flushing the count cache on context switch on some IBM CPUs (controlled by firmware), as a Spectre v2 mitigation. - A series to enhance the information we print on unhandled signals to bring it into line with other arches, including showing the offending VMA and dumping the instructions around the fault. Thanks to: Aaro Koskinen, Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Alexey Spirkov, Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Arnd Bergmann, Bartosz Golaszewski, Benjamin Herrenschmidt, Bharat Bhushan, Bjoern Noetel, Boqun Feng, Breno Leitao, Bryant G. Ly, Camelia Groza, Christophe Leroy, Christoph Hellwig, Cyril Bur, Dan Carpenter, Daniel Klamt, Darren Stevens, Dave Young, David Gibson, Diana Craciun, Finn Thain, Florian Weimer, Frederic Barrat, Gautham R. Shenoy, Geert Uytterhoeven, Geoff Levand, Guenter Roeck, Gustavo Romero, Haren Myneni, Hari Bathini, Joel Stanley, Jonathan Neuschäfer, Kees Cook, Madhavan Srinivasan, Mahesh Salgaonkar, Markus Elfring, Mathieu Malaterre, Mauro S. M. Rodrigues, Michael Hanselmann, Michael Neuling, Michael Schmitz, Mukesh Ojha, Murilo Opsfelder Araujo, Nicholas Piggin, Parth Y Shah, Paul Mackerras, Paul Menzel, Ram Pai, Randy Dunlap, Rashmica Gupta, Reza Arbab, Rodrigo R. Galvao, Russell Currey, Sam Bobroff, Scott Wood, Shilpasri G Bhat, Simon Guo, Souptick Joarder, Stan Johnson, Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain, Vasant Hegde, Venkat Rao, zhong jiang" * tag 'powerpc-4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (234 commits) powerpc/mm/book3s/radix: Add mapping statistics powerpc/uaccess: Enable get_user(u64, *p) on 32-bit powerpc/mm/hash: Remove unnecessary do { } while(0) loop powerpc/64s: move machine check SLB flushing to mm/slb.c powerpc/powernv/idle: Fix build error powerpc/mm/tlbflush: update the mmu_gather page size while iterating address range powerpc/mm: remove warning about ‘type’ being set powerpc/32: Include setup.h header file to fix warnings powerpc: Move `path` variable inside DEBUG_PROM powerpc/powermac: Make some functions static powerpc/powermac: Remove variable x that's never read cxl: remove a dead branch powerpc/powermac: Add missing include of header pmac.h powerpc/kexec: Use common error handling code in setup_new_fdt() powerpc/xmon: Add address lookup for percpu symbols powerpc/mm: remove huge_pte_offset_and_shift() prototype powerpc/lib: Use patch_site to patch copy_32 functions once cache is enabled powerpc/pseries: Fix endianness while restoring of r3 in MCE handler. powerpc/fadump: merge adjacent memory ranges to reduce PT_LOAD segements powerpc/fadump: handle crash memory ranges array index overflow ...
| * | | hwmon: (ibmpowernv) Add attributes to enable/disable sensor groupsShilpasri G Bhat2018-07-311-32/+206
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | OPAL firmware provides the facility for some groups of sensors to be enabled/disabled at runtime to give the user the option of using the system resources for collecting these sensors or not. For example, on POWER9 systems, the On Chip Controller (OCC) gathers various system and chip level sensors and maintains their values in main memory. This patch provides support for enabling/disabling the sensor groups like power, temperature, current and voltage. Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com> [stewart@linux.vnet.ibm.com: Commit message] Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2018-08-161-0/+4
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking updates from David Miller: "Highlights: - Gustavo A. R. Silva keeps working on the implicit switch fallthru changes. - Support 802.11ax High-Efficiency wireless in cfg80211 et al, From Luca Coelho. - Re-enable ASPM in r8169, from Kai-Heng Feng. - Add virtual XFRM interfaces, which avoids all of the limitations of existing IPSEC tunnels. From Steffen Klassert. - Convert GRO over to use a hash table, so that when we have many flows active we don't traverse a long list during accumluation. - Many new self tests for routing, TC, tunnels, etc. Too many contributors to mention them all, but I'm really happy to keep seeing this stuff. - Hardware timestamping support for dpaa_eth/fsl-fman from Yangbo Lu. - Lots of cleanups and fixes in L2TP code from Guillaume Nault. - Add IPSEC offload support to netdevsim, from Shannon Nelson. - Add support for slotting with non-uniform distribution to netem packet scheduler, from Yousuk Seung. - Add UDP GSO support to mlx5e, from Boris Pismenny. - Support offloading of Team LAG in NFP, from John Hurley. - Allow to configure TX queue selection based upon RX queue, from Amritha Nambiar. - Support ethtool ring size configuration in aquantia, from Anton Mikaev. - Support DSCP and flowlabel per-transport in SCTP, from Xin Long. - Support list based batching and stack traversal of SKBs, this is very exciting work. From Edward Cree. - Busyloop optimizations in vhost_net, from Toshiaki Makita. - Introduce the ETF qdisc, which allows time based transmissions. IGB can offload this in hardware. From Vinicius Costa Gomes. - Add parameter support to devlink, from Moshe Shemesh. - Several multiplication and division optimizations for BPF JIT in nfp driver, from Jiong Wang. - Lots of prepatory work to make more of the packet scheduler layer lockless, when possible, from Vlad Buslov. - Add ACK filter and NAT awareness to sch_cake packet scheduler, from Toke Høiland-Jørgensen. - Support regions and region snapshots in devlink, from Alex Vesker. - Allow to attach XDP programs to both HW and SW at the same time on a given device, with initial support in nfp. From Jakub Kicinski. - Add TLS RX offload and support in mlx5, from Ilya Lesokhin. - Use PHYLIB in r8169 driver, from Heiner Kallweit. - All sorts of changes to support Spectrum 2 in mlxsw driver, from Ido Schimmel. - PTP support in mv88e6xxx DSA driver, from Andrew Lunn. - Make TCP_USER_TIMEOUT socket option more accurate, from Jon Maxwell. - Support for templates in packet scheduler classifier, from Jiri Pirko. - IPV6 support in RDS, from Ka-Cheong Poon. - Native tproxy support in nf_tables, from Máté Eckl. - Maintain IP fragment queue in an rbtree, but optimize properly for in-order frags. From Peter Oskolkov. - Improvde handling of ACKs on hole repairs, from Yuchung Cheng" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1996 commits) bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT" hv/netvsc: Fix NULL dereference at single queue mode fallback net: filter: mark expected switch fall-through xen-netfront: fix warn message as irq device name has '/' cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0 net: dsa: mv88e6xxx: missing unlock on error path rds: fix building with IPV6=m inet/connection_sock: prefer _THIS_IP_ to current_text_addr net: dsa: mv88e6xxx: bitwise vs logical bug net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd() ieee802154: hwsim: using right kind of iteration net: hns3: Add vlan filter setting by ethtool command -K net: hns3: Set tx ring' tc info when netdev is up net: hns3: Remove tx ring BD len register in hns3_enet net: hns3: Fix desc num set to default when setting channel net: hns3: Fix for phy link issue when using marvell phy driver net: hns3: Fix for information of phydev lost problem when down/up net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero net: hns3: Add support for serdes loopback selftest bnxt_en: take coredump_record structure off stack ...
| * | | hwmon: Add support for power min, lcrit, min_alarm and lcrit_alarmAndrew Lunn2018-07-181-0/+4
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | Some sensors support reporting minimal and lower critical power, as well as alarms when these thresholds are reached. Add support for these attributes to the hwmon core. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | hwmon: (adt7475) Change show functions to return error data correctlyTokunori Ikegami2018-08-101-2/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change update device function to return an error pointer if needed, and report the error to user space. Signed-off-by: Tokunori Ikegami <ikegami@allied-telesis.co.jp> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> [groeck: Clarified/updated description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* | | hwmon: (adt7475) Change update functions to add error handlingTokunori Ikegami2018-08-101-42/+145
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I2C SMBus sometimes returns error codes. In the error case, measurement values are updated incorrectly. The sensor application then generates warning log messages and SNMP traps. To prevent this, add error handling into the update functions. Signed-off-by: Tokunori Ikegami <ikegami@allied-telesis.co.jp> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> [groeck: Update description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* | | hwmon: (adt7475) Change valid parameter to bool typeTokunori Ikegami2018-08-101-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the valid variable is of type char, but it is used as boolean. So let's change it to bool. Signed-off-by: Tokunori Ikegami <ikegami@allied-telesis.co.jp> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> [groeck: Update description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-23 15:25:46 +0200