summaryrefslogtreecommitdiffstats
path: root/drivers/hwmon
Commit message (Collapse)AuthorAgeFilesLines
* hwmon: (k10temp) Add support for Kaveri CPUsPhil Pokorny2014-01-151-0/+1
| | | | | | | | Add new PCI ID to support new model "Kaveri" family. Signed-off-by: Philip Pokorny <ppokorny@penguincomputing.com> Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (nct6775) Re-enable logical device mapping for NCT6791 during resumeGuenter Roeck2014-01-151-11/+27
| | | | | | | | After a suspend/resume cycle, the NCT6791 is back to its original BIOS programming. In this state, HWMON IO access may be locked. Re-enable it during resume. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (coretemp) Do not return -EAGAIN for low temperaturesGuenter Roeck2014-01-151-8/+9
| | | | | | | | | | | Some Intel CPUs do not set the 'valid' bit in IA32_THERM_STATUS if the temperature is too low to be measured. This condition will not change until the CPU is hot enough for its temperature to be measured. Returning an error in such conditions is not very useful. Drop checking the valid bit and just return the reported temperature instead. Reviewed-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (da9052) Fix adc to voltage calculationAnthony Olech2014-01-151-2/+2
| | | | | | | | The ADC resolution of the PMIC is 10-bits, this means that the maximum possible value is 1023 and not the 1024 as originally in the code. Signed-off-by: Anthony Olech <anthony.olech.opensource@diasemi.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (coretemp) Refine TjMax detectionGuenter Roeck2014-01-151-2/+2
| | | | | | | | Intel's turbostat code uses only 7 bits from MSR_IA32_TEMPERATURE_TARGET to read TjMax, and also only accepts it if the reported temperature is at least 85 degrees C. Play safe and do the same. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (coretemp) Add PCI device ID for CE41x0 CPUsGuenter Roeck2014-01-151-3/+1Star
| | | | | | | | Since we now have to use PCI IDs to detect CPU types anyway, use this mechanism to detect CE41x0 CPUs. Advantage is that it only requires a single entry and covers all variants of CE41x0, including those unknown to us. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (coretemp) Use PCI host bridge ID to identify CPU if necessaryGuenter Roeck2014-01-151-3/+30
| | | | | | | | | | | | Atom S12x0 CPUs are identified by the CPU host bridge ID. Add an override table based on PCI IDs as well as code to detect it. PCI access functions can now be called with PCI disabled, so unlike previous attempts to use PCI IDs, the code no longer depends on it. If PCI is disabled, the CPU will not be identified correctly. Since it is unlikely that anything will work in this case, this is an acceptable limitation. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: remove DEFINE_PCI_DEVICE_TABLE macroJingoo Han2014-01-156-6/+6
| | | | | | | | | Don't use DEFINE_PCI_DEVICE_TABLE macro, because this macro is not preferred. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (coretemp) Fix truncated name of alarm attributesJean Delvare2014-01-141-1/+1
| | | | | | | | | | | | When the core number exceeds 9, the size of the buffer storing the alarm attribute name is insufficient and the attribute name is truncated. This causes libsensors to skip these attributes as the truncated name is not recognized. Reported-by: Andreas Hollmann <hollmann@in.tum.de> Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* Merge tag 'hwmon-for-linus' of ↵Linus Torvalds2013-12-121-2/+14
|\ | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fix from Guenter Roeck: "Fix HIH-6130 driver to work with BeagleBone" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: HIH-6130: Support I2C bus drivers without I2C_FUNC_SMBUS_QUICK
| * hwmon: HIH-6130: Support I2C bus drivers without I2C_FUNC_SMBUS_QUICKJosé Miguel Gonçalves2013-12-111-2/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | Some I2C bus drivers do not allow zero-length data transfers which are required to start a measurement with the HIH6130/1 sensor. Nevertheless, we can overcome this limitation by writing a zero dummy byte. This byte is ignored by the sensor and was verified to be working with the OMAP I2C bus driver in a BeagleBone board. Signed-off-by: José Miguel Gonçalves <jose.goncalves@inov.pt> [Guenter Roeck: Simplified complexity of write_length initialization] Cc: stable@vger.kernel.org # v3.10+ Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* | hwmon: Prevent some divide by zeros in FAN_TO_REG()Dan Carpenter2013-12-123-1/+5
| | | | | | | | | | | | | | | | | | | | | | The "rpm * div" operations can overflow here, so this patch adds an upper limit to rpm to prevent that. Jean Delvare helped me with this patch. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Roger Lucas <vt8231@hiddenengine.co.uk> Cc: stable@vger.kernel.org Signed-off-by: Jean Delvare <khali@linux-fr.org>
* | hwmon: (w83l768ng) Fix fan speed control rangeJean Delvare2013-12-121-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | The W83L786NG stores the fan speed on 4 bits while the sysfs interface uses a 0-255 range. Thus the driver should scale the user input down to map it to the device range, and scale up the value read from the device before presenting it to the user. The reserved register nibble should be left unchanged. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net>
* | hwmon: (w83l786ng) Fix fan speed control mode setting and reportingBrian Carnes2013-12-121-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | The wrong mask is used, which causes some fan speed control modes (pwmX_enable) to be incorrectly reported, and some modes to be impossible to set. [JD: add subject and description.] Signed-off-by: Brian Carnes <bmcarnes@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Jean Delvare <khali@linux-fr.org>
* | hwmon: (lm90) Unregister hwmon device if interrupt setup failsGuenter Roeck2013-12-121-1/+3
|/ | | | | | | | | | Commit 109b1283fb (hwmon: (lm90) Add support to handle IRQ) introduced interrupt support. Its error handling code fails to unregister the already registered hwmon device. Fixes: 109b1283fb532ac773a076748ffccf76a7067cab Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* Merge branch 'acpica'Rafael J. Wysocki2013-11-271-1/+0Star
|\ | | | | | | | | | | | | | | | | | | | | * acpica: ACPI: Clean up incorrect inclusions of ACPICA headers ACPICA: Update version to 20131115. ACPICA: Add support to delete all objects attached to the root namespace node. ACPICA: Delete all attached data objects during namespace node deletion. ACPICA: Resources: Fix loop termination for the get AML length function. ACPICA: Tests: Add CHECKSUM_ABORT protection for test utilities. ACPICA: Debug output: Do not emit function nesting level for kernel build.
| * ACPI: Clean up incorrect inclusions of ACPICA headersLv Zheng2013-11-261-1/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Header file <acpi/acpi.h> contains environemnt settings and architecture specific implementation that should be included before any other ACPICA headers in order to keep a consistent build environment for ACPICA users. The following internal ACPICA header files should be included from <acpi/acpi.h> and should not be included by other kernel files: <acpi/acpiosxf.h> <acpi/acpixf.h> Clean up incorrect inclusions of these files from non-ACPICA source files. [rjw: Subject and changelog] Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | hwmon: (acpi_power_meter) Fix acpi_bus_get_device() return value checkYijing Wang2013-11-201-3/+2Star
| | | | | | | | | | | | | | | | | | Since acpi_bus_get_device() returns plain int and not acpi_status, ACPI_FAILURE() should not be used for checking its return value. Fix that. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* | hwmon: (nct6775) NCT6791 supports weight control only for CPUFANGuenter Roeck2013-11-181-8/+21
| | | | | | | | | | | | | | | | Unlike other chips supported by this driver, the NCT6791 only has a single set of registers to configure weighted fan control. Enable it only for the single channel supporting it. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* | hwmon: (nct6775) Monitor additional temperature registersGuenter Roeck2013-11-181-2/+60
| | | | | | | | | | | | | | | | | | | | | | The number of SMIOVT registers on NCT6779 and NCT6791 is limited to 2. As result, the driver may not report some of the temperatures used for fan control. This can result in some of the pwmX_temp_sel or pwm2_weight_temp_sel attributes to wrongly return 0. Fortunately, the chip has registers to monitor those temperatures. Add them to the list of temperatures to report. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* | hwmon: (lm75) Add support for GMT G751 chipArnaud Ebalard2013-11-182-0/+4
| | | | | | | | | | | | | | | | This was tested on a NETGEAR ReadyNAS 2120 device (Marvell Armada XP based board, via DT). Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* | Merge branch 'hwmon-for-linus' of ↵Linus Torvalds2013-11-161-97/+230
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging Pull hwmon fixes and updates from Jean Delvare: "All lm90 driver fixes and improvements" * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: Documentation: dt: hwmon: Add OF document for LM90 hwmon: (lm90) Add power control hwmon: (lm90) Add support for TI TMP451 hwmon: (lm90) Use enums for the indexes of temp8 and temp11 hwmon: (lm90) Add support to handle IRQ hwmon: (lm90) Define status bits hwmon: (lm90) Fix max6696 alarm handling
| * | hwmon: (lm90) Add power controlWei Ni2013-11-151-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The device lm90 can be controlled by the vcc rail. Adding the regulator support to power on/off the vcc rail. Enable the "vcc" regulator before accessing the device. [JD: Rename variables to avoid confusion with registers.] Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | hwmon: (lm90) Add support for TI TMP451Wei Ni2013-11-151-8/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TI TMP451 is mostly compatible with ADT7461, except for local temperature low byte and max conversion rate. Add support to the LM90 driver. Signed-off-by: Wei Ni <wni@nvidia.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | hwmon: (lm90) Use enums for the indexes of temp8 and temp11Wei Ni2013-11-151-64/+88
| | | | | | | | | | | | | | | | | | | | | | | | Using enums for the indexes and nrs of temp8 and temp11. This make the code much more readable. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | hwmon: (lm90) Add support to handle IRQWei Ni2013-11-151-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | When the temperature exceed the limit range value, the driver can handle the interrupt. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | hwmon: (lm90) Define status bitsWei Ni2013-11-151-27/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add bit defines for the status register. And add a function lm90_is_tripped() which will read status register and return tripped or not, then lm90_alert can call it directly, and in the future the IRQ thread also can use it. [JD: Adjusted to include all the new MAX6696 status flags.] Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | hwmon: (lm90) Fix max6696 alarm handlingGuenter Roeck2013-11-151-4/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bit 2 of status register 2 on MAX6696 (external diode 2 open) sets ALERT; the bit thus has to be listed in alert_alarms. Also display a message in the alert handler if the condition is encountered. Even though not all overtemperature conditions cause ALERT to be set, we should not ignore them in the alert handler. Display messages for all out-of-range conditions. Reported-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org Signed-off-by: Jean Delvare <khali@linux-fr.org>
* | | tree-wide: use reinit_completion instead of INIT_COMPLETIONWolfram Sang2013-11-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use this new function to make code more comprehensible, since we are reinitialzing the completion, not initializing. [akpm@linux-foundation.org: linux-next resyncs] Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13) Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | Merge tag 'spi-v3.13' of ↵Linus Torvalds2013-11-121-6/+1Star
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "As well as the usual driver updates and cleanups there's a few improvements to the core here: - The start of some improvements to factor out more of the SPI message loop into the core. Right now this is just simplifying the code a bit but hopefully next time around we'll also have managed to roll out some noticable performance improvements which drivers can take advantage of. - Support for loading modules for ACPI enumerated SPI devices. - Managed registration for SPI controllers. - Helper for another common I/O pattern" * tag 'spi-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (116 commits) spi/hspi: add device tree support spi: atmel: fix return value check in atmel_spi_probe() spi: spi-imx: only enable the clocks when we start to transfer a message spi/s3c64xx: Fix doubled clock disable on suspend spi/s3c64xx: Do not ignore return value of spi_master_resume/suspend spi: spi-mxs: Use u32 instead of uint32_t spi: spi-mxs: Don't set clock for each xfer spi: spi-mxs: Clean up setup_transfer function spi: spi-mxs: Remove check of spi mode bits spi: spi-mxs: Fix race in setup method spi: spi-mxs: Remove bogus setting of ssp clk rate field spi: spi-mxs: Remove full duplex check, spi core already does it spi: spi-mxs: Fix chip select control bits in DMA mode spi: spi-mxs: Fix extra CS pulses and read mode in multi-transfer messages spi: spi-mxs: Change flag arguments in txrx functions to bit flags spi: spi-mxs: Always clear INGORE_CRC, to keep CS asserted spi: spi-mxs: Remove mxs_spi_enable and mxs_spi_disable spi: spi-mxs: Always set LOCK_CS spi/s3c64xx: Add missing pm_runtime_put on setup fail spi/s3c64xx: Add missing pm_runtime_set_active() call in probe() ...
| * \ \ Merge remote-tracking branch 'spi/topic/wr' into spi-nextMark Brown2013-10-251-6/+1Star
| |\ \ \ | | |/ / | |/| |
| | * | hwmon: (adt7310) Use spi_w8r16be() instead spi_w8r16()Lars-Peter Clausen2013-10-031-6/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Using spi_w8r16be() instead of spi_w8r16() in this driver makes a code a bit shorter and cleaner. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Mark Brown <broonie@linaro.org>
* | | | hwmon: (w83793) Clean up a signedness issueDan Carpenter2013-10-191-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We cap the upper bound of "mtimeout" but since it's signed we should check for negative values as well. The mistake is harmless. But I have changed it to unsigned as a cleanup. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* | | | hwmon: (nct6775) Remove an unused variableDan Carpenter2013-10-191-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | We don't actually use "j" for anything. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* | | | hwmon: (emc1403) Add support for EMC1404 and EMC1424Guenter Roeck2013-10-181-8/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | EMC1404 and EMC1424 are similar to EMC1403 and EMC1423, but support an additional external temperature sensor. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* | | | hwmon: (emc1403) Convert to use devm_hwmon_device_register_with_groupsGuenter Roeck2013-10-181-47/+26Star
| | | | | | | | | | | | | | | | | | | | | | | | Simplify code and reduce its size. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* | | | hwmon: (pmbus/ltc2978): Add support for LTC2978AGuenter Roeck2013-10-181-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | Detect LTC2978A chip ID. Treat it as LC2978. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* | | | hwmon: (pmbus/ltc2978): Add support for LTC2977Guenter Roeck2013-10-181-3/+9
| | | | | | | | | | | | | | | | | | | | | | | | LTC2977 is a pin compatible replacement for LTC2978. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* | | | hwmon: (pmbus/lm25066) Add support for LM25063Guenter Roeck2013-10-181-9/+82
| | | | | | | | | | | | | | | | Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* | | | hwmon: Correct some typosLABBE Corentin2013-10-188-10/+10
| | | | | | | | | | | | | | | | | | | | Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* | | | hwmon: (gpio-fan) Include linux/of.h headerSachin Kamat2013-10-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | 'of_match_ptr' is defined in linux/of.h. Include it explicitly. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* | | | hwmon: (lm70) Remove redundant spi_set_drvdataSachin Kamat2013-10-181-2/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Driver core sets driver data to NULL upon failure or remove. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Kaiwan N Billimoria <kaiwan@designergraphix.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* | | | hwmon: (adcxx) Remove redundant spi_set_drvdataSachin Kamat2013-10-181-2/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Driver core sets driver data to NULL upon failure or remove. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Marc Pignat <marc.pignat@hevs.ch> Acked-by: Marc Pignat <marc.pignat@hevs.ch> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* | | | hwmon: (jc42) fix coccinelle warningsFengguang Wu2013-10-181-4/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | drivers/hwmon/jc42.c:521:1-3: WARNING: PTR_RET can be used Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Generated by: coccinelle/api/ptr_ret.cocci CC: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* | | | hwmon: (ltc4261) fix coccinelle warningsFengguang Wu2013-10-181-4/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | drivers/hwmon/ltc4261.c:243:1-3: WARNING: PTR_RET can be used Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Generated by: coccinelle/api/ptr_ret.cocci CC: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* | | | hwmon: (lm95234) fix coccinelle warningsFengguang Wu2013-10-181-4/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | drivers/hwmon/lm95234.c:704:1-3: WARNING: PTR_RET can be used Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Generated by: coccinelle/api/ptr_ret.cocci CC: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* | | | hwmon: (max6697) fix coccinelle warningsFengguang Wu2013-10-181-4/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | drivers/hwmon/max6697.c:649:1-3: WARNING: PTR_RET can be used Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Generated by: coccinelle/api/ptr_ret.cocci CC: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* | | | hwmon: (max6642 fix coccinelle warningsFengguang Wu2013-10-181-4/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | drivers/hwmon/max6642.c:299:1-3: WARNING: PTR_RET can be used Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Generated by: coccinelle/api/ptr_ret.cocci CC: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* | | | hwmon: (ds1621) fix coccinelle warningsFengguang Wu2013-10-181-4/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | drivers/hwmon/ds1621.c:381:1-3: WARNING: PTR_RET can be used Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Generated by: coccinelle/api/ptr_ret.cocci CC: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* | | | hwmon: (nct6775) fix coccinelle warningsFengguang Wu2013-10-181-4/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | drivers/hwmon/nct6775.c:3866:1-3: WARNING: PTR_RET can be used Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Generated by: coccinelle/api/ptr_ret.cocci CC: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-11-06 05:56:57 +0100