summaryrefslogtreecommitdiffstats
path: root/drivers/ide
Commit message (Collapse)AuthorAgeFilesLines
* [PATCH] IDE CD end-of media error fixAlan Cox2006-06-252-28/+149
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a patch from Alan that fixes a real ide-cd.c regression causing bogus "Media Check" failures for perfectly valid Fedora install ISOs, on certain CD-ROM drives. This is a forward port to 2.6.16 (from RHEL) of the minimal changes for the end of media problem. It may not be sufficient for some controllers (promise notably) and it does not touch the locking so the error path locking is as horked as in mainstream. From: Ingo Molnar <mingo@elte.hu> I have ported the patch to 2.6.17-rc4 and tested it by provoking end-of-media IO errors with an unaligned ISO image. Unlike the vanilla kernel, the patched kernel interpreted the error condition correctly with 512 byte granularity: hdc: command error: status=0x51 { DriveReady SeekComplete Error } hdc: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } ide: failed opcode was: unknown ATAPI device hdc: Error: Illegal request -- (Sense key=0x05) Illegal mode for this track or incompatible medium -- (asc=0x64, ascq=0x00) The failed "Read 10" packet command was: "28 00 00 04 fb 78 00 00 06 00 00 00 00 00 00 00 " end_request: I/O error, dev hdc, sector 1306080 Buffer I/O error on device hdc, logical block 163260 Buffer I/O error on device hdc, logical block 163261 Buffer I/O error on device hdc, logical block 163262 the unpatched kernel produces an incorrect error dump: hdc: command error: status=0x51 { DriveReady SeekComplete Error } hdc: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } ide: failed opcode was: unknown end_request: I/O error, dev hdc, sector 1306080 Buffer I/O error on device hdc, logical block 163260 hdc: command error: status=0x51 { DriveReady SeekComplete Error } hdc: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } ide: failed opcode was: unknown end_request: I/O error, dev hdc, sector 1306088 Buffer I/O error on device hdc, logical block 163261 hdc: command error: status=0x51 { DriveReady SeekComplete Error } hdc: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } ide: failed opcode was: unknown end_request: I/O error, dev hdc, sector 1306096 Buffer I/O error on device hdc, logical block 163262 I do not have the right type of CD-ROM drive to reproduce the end-of-media data corruption bug myself, but this same patch in RHEL solved it. Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Jens Axboe <axboe@suse.de> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] idetape gcc 4.1 warning fixDaniel Walker2006-06-251-16/+33
| | | | | | | | | | | | | | | | | | | | | | | | In both the read and write cases it will return an error if copy_{from/to}_user faults. However, I let the driver try to read/write as much as it can just as it normally would , then finally it returns an error if there was one. This was the most straight forward way to handle the error , since there isn't a clear way to clean up the buffers on error . I moved retval in idetape_chrdev_write() down into the actual code blocks since it's really once used there, and it conflicted with my ret variable. Fixes the following warning, drivers/ide/ide-tape.c: In function ‘idetape_copy_stage_from_user’: drivers/ide/ide-tape.c:2662: warning: ignoring return value of ‘copy_from_user’, declared with attribute warn_unused_result drivers/ide/ide-tape.c: In function ‘idetape_copy_stage_to_user’: drivers/ide/ide-tape.c:2689: warning: ignoring return value of ‘copy_to_user’, declared with attribute warn_unused_result Signed-off-by: Daniel Walker <dwalker@mvista.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge branch 'upstream-linus' of ↵Linus Torvalds2006-06-241-2/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: (258 commits) [libata] conversion to new debug scheme, part 1 of $N [PATCH] libata: Add ata_scsi_dev_disabled [libata] Add host lock to struct ata_port [PATCH] libata: implement per-dev EH action mask eh_info->dev_action[] [PATCH] libata-dev: move the CDB-intr DMA blacklisting [PATCH] ahci: disable NCQ support on vt8251 [libata] ahci: add JMicron PCI IDs [libata] sata_nv: add PCI IDs [libata] ahci: Add NVIDIA PCI IDs. [PATCH] libata: convert several bmdma-style controllers to new EH, take #3 [PATCH] sata_via: convert to new EH, take #3 [libata] sata_nv: s/spin_lock_irqsave/spin_lock/ in irq handler [PATCH] sata_nv: add hotplug support [PATCH] sata_nv: convert to new EH [PATCH] sata_nv: better irq handlers [PATCH] sata_nv: simplify constants [PATCH] sata_nv: kill struct nv_host_desc and nv_host [PATCH] sata_nv: kill not-working hotplug code [libata] Update docs to reflect current driver API [PATCH] libata: add host_set->next for legacy two host_sets case, take #3 ...
| * Merge branch 'master' into upstreamJeff Garzik2006-06-232-11/+1Star
| |\ | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/scsi/libata-core.c drivers/scsi/libata-scsi.c include/linux/pci_ids.h
| * \ Merge branch 'upstream-fixes' into upstreamJeff Garzik2006-06-121-5/+11
| |\ \ | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/scsi/sata_sil24.c
| * | | [PATCH] sata_nv: Add MCP61 supportAndrew Chew2006-05-241-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | Added MCP61 SATA support to sata_nv. Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | | | [PATCH] Get rid of struct request request_pm_state memberJens Axboe2006-06-232-41/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The IDE power management can just use the ->end_io_data member to store it's data. Signed-off-by: Jens Axboe <axboe@suse.de>
* | | | [PATCH] More BUG_ON conversionEric Sesterhenn2006-06-238-30/+15Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: James Bottomley <James.Bottomley@steeleye.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | [PATCH] SGI IOC4: Detect IO card variantBrent Casavant2006-06-231-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are three different IO cards which an SGI IOC4 controller may find itself on. One of these variants does not bring out the IDE and serial signals, so we need to disable attaching the corresponding IOC4 subdrivers to such cards. Cleans up message clutter emitted during device probing. Signed-off-by: Brent Casavant <bcasavan@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | [PATCH] m68k: completely initialize hw_regs_t in ide_setup_portsRoman Zippel2006-06-232-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ide_setup_ports does not completely initialize the hw_regs_t structure which can cause random failures, as the structure is often on the stack. None of the callers expect a partially initialized structure, i.e. none of them do any setup of their own before calling ide_setup_ports(). Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | [PATCH] Fix cdrom being confused on using kdumpRachita Kothiyal2006-06-231-1/+4
| |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I have seen the cdrom drive appearing confused on using kdump on certain x86_64 systems. During the booting up of the second kernel, the following message would keep flooding the console, and the booting would not proceed any further. hda: cdrom_pc_intr: The drive appears confused (ireason = 0x01) In this patch, whenever we are hitting a confused state in the interrupt handler with the DRQ set, we end the request and return ide_stopped. Using this I dont see the status error. Signed-off-by: Rachita Kothiyal <rachita@in.ibm.com> Acked-by: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | [SPARC]: Kill __irq_itoa().David S. Miller2006-06-202-11/+1Star
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This ugly hack was long overdue to die. It was a way to print out Sparc interrupts in a more freindly format, since IRQ numbers were arbitrary opaque 32-bit integers which vectored into PIL levels. These 32-bit integers were not necessarily in the 0-->NR_IRQS range, but the PILs they vectored to were. The idea now is that we will increase NR_IRQS a little bit and use a virtual<-->real IRQ number mapping scheme similar to PowerPC. That makes this IRQ printing hack irrelevant, and furthermore only a handful of drivers actually used __irq_itoa() making it even less useful. Signed-off-by: David S. Miller <davem@davemloft.net>
* | [PATCH] sgiioc4: use mmio ops instead of port ioJeremy Higdon2006-06-011-5/+11
|/ | | | | | | | | | | | | | | | | | From: Jeremy Higdon <jeremy@sgi.com> This patch fixes a bug in sgiioc4 where it was using the default IDE port I/O operations instead of MMIO. The IDE part of the IOC4 chip uses MMIO to map the chip registers. Unfortunately, the sgiioc4 driver uses the default port IO operations, which happens to have worked for the past few years. That's about to change, however, thus this change from inX/outX to readX/writeX. Signed-off-by: Jeremy Higdon <jeremy@sgi.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] powerpc: Fix ide-pmac sysfs entryBenjamin Herrenschmidt2006-05-211-0/+2
| | | | | | | | | | | | | | | It looks like the generic ide code now wants ide_init_hwif_ports() to set the parent struct device into the ide_hw structure (new field ?). Without this, the mac ide code can cause the ide probing code to explode in flames in sysfs registration due to what looks like a stale pointer in there (happens when removing/re-inserting one of the hotswap media bays on some laptops). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ide_cs: Add IBM microdrive to known IDsThomas Kleffel2006-05-151-0/+1
| | | | | | | | | | | Add the IBM microdrive to the known PCMCIA IDs for ide_cs. Signed-off-by: Thomas Kleffel <tk@maintech.de> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] alim15x3: ULI M-1573 south Bridge supportKAI.HSU2006-04-191-0/+2
| | | | | | | | | | | | | | | | From http://bugzilla.kernel.org/show_bug.cgi?id=6358 The alim15x3.c havn't been update for 3 years. Recently when we use this "ULI M1573" south bridge chip found that can't mount CDROM(VCD) smoothly, must waiting for a long time. After I check the "ULI M1573" south bridge datasheet, I found the reason. The reason is the "ULI M1573" version in the Linux is "0xC7" not "0xC4" anymore So I was modified the source than it was successed. Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] remove the obsolete IDEPCI_FLAG_FORCE_PDCAdrian Bunk2006-04-192-15/+0Star
| | | | | | | | | | Noted by Sergei Shtylylov <sshtylyov@ru.mvista.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ide: ATI SB600 IDE supportAnatoli Antonovitch2006-04-191-0/+1
| | | | | | | | | | | Add support for the IDE device on ATI SB600 Signed-off-by: Felix Kuehling <fkuehlin@ati.com> Acked-by: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds2006-04-021-86/+41Star
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (33 commits) [PATCH] pcmcia: declare pccard_iodyn_ops (fix m8xx_pcmcia.c compilation error) [PATCH] pcmcia: fix pcmcia_device_remove oops [PATCH] pcmcia: Add support for Possio GCC AKA PCMCIA Siemens MC45 [PATCH] pcmcia: pseudo device handling update [PATCH] pcmcia: convert DEV_OK to pcmcia_dev_present [PATCH] pcmcia: use bitfield instead of p_state and state [PATCH] pcmcia: remove unused p_dev->state flags [PATCH] pcmcia: make pcmcia_release_{io,irq} static [PATCH] pcmcia: add return value to _config() functions [PATCH] pcmcia: remove dev_link_t and client_handle_t indirection [PATCH] pcmcia: embed dev_link_t into struct pcmcia_device [PATCH] pcmcia: rename pcmcia_device.state [PATCH] pcmcia: remove unneeded Vcc pseudo setting [PATCH] pcmcia: remove export of pcmcia_release_configuration [PATCH] pcmcia: default suspend and resume handling [PATCH] pcmcia: convert remaining users of pcmcia_release_io and _irq [PATCH] pcmcia: add pcmcia_disable_device [PATCH] serial_cs: add Merlin U630 IDs [PATCH] pcmcia: AT91RM9200 Compact Flash driver [PATCH] pcmcia: socket.functions starts with 1 ...
| * [PATCH] pcmcia: use bitfield instead of p_state and stateDominik Brodowski2006-03-311-8/+1Star
| | | | | | | | | | | | | | | | | | | | Instead of the two status values struct pcmcia_device->p_state and state, use descriptive bitfields. Most value-checking in drivers was invalid, as the core now only calls the ->remove() (a.k.a. detach) function in case the attachement _and_ configuration was successful. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
| * [PATCH] pcmcia: add return value to _config() functionsDominik Brodowski2006-03-311-8/+7Star
| | | | | | | | | | | | | | | | Most of the driver initialization isn't done in the .probe function, but in the internal _config() functions. Make them return a value, so that .probe can properly report whether the probing of the device succeeded or not. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
| * [PATCH] pcmcia: remove dev_link_t and client_handle_t indirectionDominik Brodowski2006-03-311-32/+28Star
| | | | | | | | | | | | | | dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
| * [PATCH] pcmcia: embed dev_link_t into struct pcmcia_deviceDominik Brodowski2006-03-311-7/+6Star
| | | | | | | | | | | | | | | | | | Embed dev_link_t into struct pcmcia_device(), as they basically address the same entity. The actual contents of dev_link_t will be cleaned up step by step. This patch includes a bugfix from and signed-off-by Andrew Morton. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
| * [PATCH] pcmcia: remove unneeded Vcc pseudo settingDominik Brodowski2006-03-311-7/+4Star
| | | | | | | | | | | | | | | | | | As we do not allow setting Vcc in the pcmcia core, and Vpp1 and Vpp2 can only be set to the same value, a lot of code can be streamlined. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
| * [PATCH] pcmcia: default suspend and resume handlingDominik Brodowski2006-03-311-23/+0Star
| | | | | | | | | | | | | | | | | | | | In all but one case, the suspend and resume functions of PCMCIA drivers contain mostly of calls to pcmcia_release_configuration() and pcmcia_request_configuration(). Therefore, move this code out of the drivers and into the core. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
| * [PATCH] pcmcia: add pcmcia_disable_deviceDominik Brodowski2006-03-311-7/+1Star
| | | | | | | | | | | | | | | | | | | | pcmcia_disable_device(struct pcmcia_device *p_dev) performs the necessary cleanups upon device or driver removal: it calls the appropriate pcmcia_release_* functions, and can replace (most) of the current drivers' _release() functions. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
* | [PATCH] LED: Add IDE disk activity LED triggerRichard Purdie2006-03-311-0/+3
| | | | | | | | | | | | | | | | | | | | Add an LED trigger for IDE disk activity to the ide-disk driver. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Acked-by: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] Ensure ide-taskfile calls any driver specific end_request functionRichard Purdie2006-03-311-1/+7
|/ | | | | | | | | | | Ensure ide-taskfile.c calls any driver specific end_request function if present. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge ../linux-2.6Paul Mackerras2006-03-295-9/+10
|\
| * [PATCH] ide-tape: use time_after(), time_after_eq()Marcelo Feitoza Parisi2006-03-281-2/+3
| | | | | | | | | | | | | | | | | | | | | | They deal with wrapping correctly and are nicer to read. Signed-off-by: Marcelo Feitoza Parisi <marcelo@feitoza.com.br> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
| * [PATCH] ide_generic_all_on() warning fixAndrew Morton2006-03-281-1/+2
| | | | | | | | | | | | | | | | drivers/ide/pci/generic.c:45: warning: `ide_generic_all_on' defined but not used Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
| * [PATCH] Small fixes backported to old IDE SiS driverAlan Cox2006-03-281-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some quick backport bits from the libata PATA work to fix things found in the sis driver. The piix driver needs some fixes too but those are way to large and need someone working on old IDE with time to do them. This patch fixes the case where random bits get loaded into SIS timing registers according to the description of the correct behaviour from Vojtech Pavlik. It also adds the SiS5517 ATA16 chipset which is not currently supported by the driver. Thanks to Conrad Harriss for loaning me the machine with the 5517 chipset. Signed-off-by: Alan Cox <alan@redhat.com> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
| * [PATCH] ide: AMD756 no host side cable detectionRene Herman2006-03-281-6/+2Star
| | | | | | | | | | | | | | | | | | | | | | | | >From http://marc.theaimsgroup.com/?l=linux-kernel&m=110304128900342&w=2 AMD756 doesn't support host side cable detection. Do disk side only and don't advice obsolete options. Acked-by: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
| * [PATCH] ide-cd: quiet down GPCMD_READ_CDVD_CAPACITY failureJens Axboe2006-03-271-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Some drives like to throw a: ATAPI device hdc: Error: Not ready -- (Sense key=0x02) Incompatible medium installed -- (asc=0x30, ascq=0x00) The failed "Read Cd/Dvd Capacity" packet command was: "25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 " warning on incompatible media, so quiet down this error. Signed-off-by: Jens Axboe <axboe@suse.de>
* | [PATCH] powerpc: Kill _machine and hard-coded platform numbersBenjamin Herrenschmidt2006-03-282-2/+2
|/ | | | | | | | | | | | | | | | This removes statically assigned platform numbers and reworks the powerpc platform probe code to use a better mechanism. With this, board support files can simply declare a new machine type with a macro, and implement a probe() function that uses the flattened device-tree to detect if they apply for a given machine. We now have a machine_is() macro that replaces the comparisons of _machine with the various PLATFORM_* constants. This commit also changes various drivers to use the new macro instead of looking at _machine. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] ide: fix section mismatch warningSam Ravnborg2006-03-251-1/+1
| | | | | | | | | | | | | | | | | | In latest -mm ide-code.o gave a number of warnings like the following: WARNING: drivers/ide/ide-core.o - Section mismatch: reference to \ .init.text: from .text between 'init_module' (at offset 0x1f97) and \ 'cleanup_module' The warning was caused by init_module() calling parse_option() and ide_init() both declared __init. Declaring init_module() __init fixes the warnings. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ide: Allow IDE interface to specify its not capable of 32-bit operationsKumar Gala2006-03-242-2/+9
| | | | | | | | | | | | In some embedded systems the IDE hardware interface may only support 16-bit or smaller accesses. Allow the interface to specify if this is the case and don't allow the drive or user to override the setting. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] s/;;/;/gAlexey Dobriyan2006-03-241-1/+1
| | | | | | Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sem2mutex: drivers/ideArjan van de Ven2006-03-234-24/+28
| | | | | | | | | | | | | Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] kill cdrom ->dev_ioctl methodChristoph Hellwig2006-03-231-49/+50
| | | | | | | | | | | Since early 2.4.x all cdrom drivers implement the block_device methods themselves, so they can handle additional ioctls directly instead of going through the cdrom layer. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] handle errors returned by platform_get_irq*()David Vrabel2006-03-201-0/+5
| | | | | | | | | platform_get_irq*() now returns on -ENXIO when the resource cannot be found. Ensure all users of platform_get_irq*() handle this error appropriately. Signed-off-by: David Vrabel <dvrabel@arcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] pcmcia: add another ide-cs CF card idDavid Brownell2006-03-011-0/+1
| | | | | | | Add another CF card ID. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
* Merge branch 'release' of ↵Linus Torvalds2006-02-171-5/+0Star
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
| * [IA64] remove obsolete corporate addressJes Sorensen2006-02-151-5/+0Star
| | | | | | | | | | | | | | Remove obsolete SGI address Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
* | [PATCH] ide: touch softlockup detector during pioAndrew Morton2006-02-161-0/+3
|/ | | | | | | | | | We're getting some softlockup false positives during heavy PIO operations. So poke the lockup detector. Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ide: cast arguments to pr_debug() properlyMichael Richardson2006-02-081-2/+4
| | | | | | | | | | | This does not show up unless you #define DEBUG in the file, which most people wouldn't do. On PPC405, at least, "sector_t" is unsigned long, which doesn't match %llx/%llu. Since sector# may well be >32 bits, promote the value to match the format. Signed-off-by: Michael Richardson <mcr@xelerance.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] IDE: always enable CONFIG_PDC202XX_FORCEAdrian Bunk2006-02-033-28/+0Star
| | | | | | | | | Remove the CONFIG_PDC202XX_FORCE=n case. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] RocketPoint 1520 [hpt366] fails clock stabilizationLoren M. Lang2006-02-031-0/+4
| | | | | | | | | | | | | | | | I just purchased a HighPoint Rocket 1520 SATA controller. There seems to be no libata driver (yet), but there is an ide driver, hpt366. When the driver gets loaded, it causes a kernel NULL pointer dereference in pci_bus_clock_list. It seems to be because the driver is waiting for clock stabilization in init_hpt37x() which never comes. The driver just continues on with the pci drvdata set to NULL, instead of a valid clock entry. The following patch prevents the NULL dereference from happening, but instead exit with an error. Acked-by: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ide: set latency when resetting it821x out of firmware modeAlan Cox2006-02-031-1/+1
| | | | | | | Signed-off-by: Alan Cox <alan@redhat.com> Acked-by: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ide-disk: Restore missing space in log messageJean Delvare2006-02-031-1/+1
| | | | | | | | | | | | Restore a missing space in a log message, which was accidentally removed by a previous change: 3e087b575496b8aa445192f58e7d996b1cdfa121 Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Tejun Heo <htejun@gmail.com> Cc: Jens Axboe <axboe@suse.de> Acked-by: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-14 21:31:51 +0200