summaryrefslogtreecommitdiffstats
path: root/drivers/ieee1394
Commit message (Collapse)AuthorAgeFilesLines
* ieee1394: fix to ether1394_tx in ether1394.cCarlos E. Ugarte2007-06-161-6/+15
| | | | | | | | | | | | This patch fixes a problem that occurs when packets cannot be sent across the ieee1394 bus and we return NETDEV_TX_BUSY in the net driver "hard start xmit" routine ether1394_tx. When we return NETDEV_TX_BUSY the stack will call ether1394_tx again with the same skb. So we need to restore the header to look like it did before we munged it for xmit over ieee1394. [Stefan Richter: changed whitespace, deleted a local variable] Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* ieee1394: sbp2: offer SAM-conforming target port ID in sysfsStefan Richter2007-05-313-2/+35
| | | | | | | | | | | | | | | | | | | | | | With "modprobe sbp2 long_ieee1394_id=y", the format of /sys/bus/scsi/devices/*:*:*:*/ieee1394_id is changed from e.g. 0001041010004beb:0:0 to 0001041010004beb:00042c:0000. The longer format fully conforms to object identifier sizes as per SAM(-2...4) and reflects what the SAM target port identifier is meant to contain: A Discovery ID allegedly specified by ISO/IEC 13213:1994 --- however there is no such thing; the authors of SAM probably meant Directory ID). Especially target nodes with multiple dynamically added targets may use Directory IDs to persistently identify target ports. The new format is independent of implementation details of nodemgr. Thus the same ieee1394_id attribute format can be implemented in the new firewire stack. The ieee1394_id is typically used to create persistently named links in /dev/disk/by-id. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* ieee1394: fix calculation of sysfs attribute "address"Stefan Richter2007-05-311-1/+1
| | | | | | | struct csr1212_keyval.offset is relative to 0xffff f000 0000 rather than 0xffff f000 0400. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* ieee1394: raw1394: Fix async sendPetr Vandrovec2007-05-271-3/+5
| | | | | | | | | | | While playing with libiec61883 I've noticed that async_send is broken because it was doing copy_from_user(...., packet->data_size) before packet->data_size was set to any useful value. It got broken when packet->allocated_data_size got introduced, as hpsb_alloc_packet does not set packet->data_size anymore. (Regression in 2.6.22-rc1) Signed-off-by: Petr Vandrovec <petr@vandrovec.name> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* ieee1394: eth1394: bring back a parent deviceStefan Richter2007-05-271-4/+3Star
| | | | | | | | | | | | | | | | This adds a real parent device to eth1394's ethX device like in Linux 2.6.20 and older. However, due to unfinished conversion of the ieee1394 away from class_device, we now refer to the FireWire controller's PCI device as the parent, not to the ieee1394 driver's fw-host device. Having a real parent device instead of a virtual one allows udev scripts to distinguish eth1394 interfaces from networking bridges, bondings and the likes. Fixes a regression since 2.6.21: https://bugs.gentoo.org/show_bug.cgi?id=177199 Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* ieee1394: eth1394: handle tlabel exhaustionStefan Richter2007-05-272-17/+67
| | | | | | | | | | | | | When eth1394 was unable to acquire a transaction label, it just dropped outgoing packets without attempt to resend them later. The transmit queue is now halted if no tlabel is available to ->hard_start_xmit(). A workqueue job is then scheduled to catch the moment when ieee1394 recycled the next lot of tlabels. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=8402 Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* ieee1394: eth1394: remove bogus netif_wake_queueStefan Richter2007-05-271-4/+0Star
| | | | | | When we are within hard_start_xmit, the queue is already awake. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* ieee1394: sbp2: include workqueue.hStefan Richter2007-05-271-0/+1
| | | | Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* Merge branch 'juju' of ↵Linus Torvalds2007-05-101-0/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'juju' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: (138 commits) firewire: Convert OHCI driver to use standard goto unwinding for error handling. firewire: Always use parens with sizeof. firewire: Drop single buffer request support. firewire: Add a comment to describe why we split the sg list. firewire: Return SCSI_MLQUEUE_HOST_BUSY for out of memory cases in queuecommand. firewire: Handle the last few DMA mapping error cases. firewire: Allocate scsi_host up front and allocate the sbp2_device as hostdata. firewire: Provide module aliase for backwards compatibility. firewire: Add to fw-core-y instead of assigning fw-core-objs in Makefile. firewire: Break out shared IEEE1394 constant to separate header file. firewire: Use linux/*.h instead of asm/*.h header files. firewire: Uppercase most macro names. firewire: Coding style cleanup: no spaces after function names. firewire: Convert card_rwsem to a regular mutex. firewire: Clean up comment style. firewire: Use lib/ implementation of CRC ITU-T. CRC ITU-T V.41 firewire: Rename fw-device-cdev.c to fw-cdev.c and move header to include/linux. firewire: Future proof the iso ioctls by adding a handle for the iso context. firewire: Add read/write and size annotations to IOC numbers. ... Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * firewire: put old and new stack into same Kconfig submenuStefan Richter2007-03-091-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Screenshot from "make menuconfig": ... ?????????????????????? IEEE 1394 (FireWire) support ??????????????????????? ? Arrow keys navigate the menu. <Enter> selects submenus --->. ? ... ? ??????????????????????????????????????????????????????????????????????? ? ? ? <M> IEEE 1394 (FireWire) support (JUJU alternative stack, experim? ? ? ? <M> Support for OHCI firewire host controllers ? ? ? ? <M> Support for storage devices (SBP-2 protocol driver) ? ? ? ? <M> IEEE 1394 (FireWire) support ? ? ? ? --- Subsystem Options ? ? ? ? [ ] Excessive debugging output ? ? ... ? <Select> < Exit > < Help > ? ??????????????????????????????????????????????????????????????????????????? Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | [S390] Kconfig: refine depends statements.Martin Schwidefsky2007-05-101-0/+1
| | | | | | | | | | | | | | Refine some depends statements to limit their visibility to the environments that are actually supported. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | Fix occurrences of "the the "Michael Opdenacker2007-05-091-1/+1
| | | | | | | | | | Signed-off-by: Michael Opdenacker <michael@free-electrons.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* | header cleaning: don't include smp_lock.h when not usedRandy Dunlap2007-05-083-3/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | Remove includes of <linux/smp_lock.h> where it is not used/needed. Suggested by Al Viro. Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc, sparc64, and arm (all 59 defconfigs). Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | PCI: Cleanup the includes of <linux/pci.h>Jean Delvare2007-05-031-1/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I noticed that many source files include <linux/pci.h> while they do not appear to need it. Here is an attempt to clean it all up. In order to find all possibly affected files, I searched for all files including <linux/pci.h> but without any other occurence of "pci" or "PCI". I removed the include statement from all of these, then I compiled an allmodconfig kernel on both i386 and x86_64 and fixed the false positives manually. My tests covered 66% of the affected files, so there could be false positives remaining. Untested files are: arch/alpha/kernel/err_common.c arch/alpha/kernel/err_ev6.c arch/alpha/kernel/err_ev7.c arch/ia64/sn/kernel/huberror.c arch/ia64/sn/kernel/xpnet.c arch/m68knommu/kernel/dma.c arch/mips/lib/iomap.c arch/powerpc/platforms/pseries/ras.c arch/ppc/8260_io/enet.c arch/ppc/8260_io/fcc_enet.c arch/ppc/8xx_io/enet.c arch/ppc/syslib/ppc4xx_sgdma.c arch/sh64/mach-cayman/iomap.c arch/xtensa/kernel/xtensa_ksyms.c arch/xtensa/platform-iss/setup.c drivers/i2c/busses/i2c-at91.c drivers/i2c/busses/i2c-mpc.c drivers/media/video/saa711x.c drivers/misc/hdpuftrs/hdpu_cpustate.c drivers/misc/hdpuftrs/hdpu_nexus.c drivers/net/au1000_eth.c drivers/net/fec_8xx/fec_main.c drivers/net/fec_8xx/fec_mii.c drivers/net/fs_enet/fs_enet-main.c drivers/net/fs_enet/mac-fcc.c drivers/net/fs_enet/mac-fec.c drivers/net/fs_enet/mac-scc.c drivers/net/fs_enet/mii-bitbang.c drivers/net/fs_enet/mii-fec.c drivers/net/ibm_emac/ibm_emac_core.c drivers/net/lasi_82596.c drivers/parisc/hppb.c drivers/sbus/sbus.c drivers/video/g364fb.c drivers/video/platinumfb.c drivers/video/stifb.c drivers/video/valkyriefb.c include/asm-arm/arch-ixp4xx/dma.h sound/oss/au1550_ac97.c I would welcome test reports for these files. I am fine with removing the untested files from the patch if the general opinion is that these changes aren't safe. The tested part would still be nice to have. Note that this patch depends on another header fixup patch I submitted to LKML yesterday: [PATCH] scatterlist.h needs types.h http://lkml.org/lkml/2007/3/01/141 Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | ieee1394: remove garbage from KconfigStefan Richter2007-04-301-2/+0Star
| | | | | | | | Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | ieee1394: more help in KconfigStefan Richter2007-04-301-8/+12
| | | | | | | | | | | | | | | | - s/Device Drivers/Controllers/ - clarify who needs pcilynx - don't recommend Y for raw1394; M is typically used Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | ieee1394: ohci1394: Fix mistake in printk message.Simon Arlott2007-04-301-1/+1
| | | | | | | | | | | | | | | | Fix the "attempting to setting" message in ohci1394. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | ieee1394: ohci1394: remove unnecessary rcvPhyPkt bit flipping in LinkControl ↵Bernhard Kauer2007-04-301-6/+2Star
| | | | | | | | | | | | | | | | | | | | register Remove the unneeded code that clears, sets and again clears the rcvPhyPkt bit in the ohci1394 LinkControl register in ohci_initialize(). Signed-off-by: Bernhard Kauer <kauer@os.inf.tu-dresden.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | ieee1394: ohci1394: fix cosmetic problem in error loggingStefan Richter2007-04-301-0/+1
| | | | | | | | | | | | | | If posted write failed, an "Unhandled interrupt(s) 0x00000100" message was logged by mistake. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | ieee1394: eth1394: send async streams at S100 on 1394b busesStefan Richter2007-04-301-5/+13
| | | | | | | | | | | | | | eth1394 did not work on buses consisting of S100B...S400B hardware because it attempted to send GASP packets at S800. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | ieee1394: eth1394: fix error path in module_initAkinobu Mita2007-04-301-3/+12
| | | | | | | | | | | | | | | | | | | | This patch fixes some error handlings in eth1394: - check return value of kmem_cache_create() - cleanup resources if hpsb_register_protocol() fails Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (whitespace)
* | ieee1394: eth1394: correct return codes in hard_start_xmitStefan Richter2007-04-301-18/+16Star
| | | | | | | | | | | | | | | | | | | | This patch actually doesn't change anything because there was always 0 == NETDEV_TX_OK returned before. TODO: Return NETDEV_TX_BUSY in error case and test in different error conditions. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | ieee1394: eth1394: hard_start_xmit is called in atomic contextStefan Richter2007-04-301-3/+2Star
| | | | | | | | Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | ieee1394: eth1394: some conditions are unlikelyStefan Richter2007-04-301-4/+4
| | | | | | | | Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | ieee1394: eth1394: clean up fragment_overlapStefan Richter2007-04-301-4/+4
| | | | | | | | | | | | | | | | offset > fi->offset + fi->len - 1 == !(offset < fi->offset + fi->len) offset + len - 1 < fi->offset == !(offset + len > fi->offset) !(A || B) == (!A && !B) Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | ieee1394: eth1394: don't use alloc_etherdevStefan Richter2007-04-301-15/+5Star
| | | | | | | | Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | ieee1394: eth1394: omit useless set_mac_address callbackStefan Richter2007-04-301-13/+1Star
| | | | | | | | | | | | We can't reconfigure the MAC address, hence we don't need the callback. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | ieee1394: eth1394: CONFIG_INET is always definedStefan Richter2007-04-301-12/+4Star
| | | | | | | | | | | | because CONFIG_IEEE1394_ETH1394 depends on it. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | ieee1394: eth1394: allow MTU bigger than 1500Stefan Richter2007-04-301-15/+19
| | | | | | | | | | | | | | | | | | | | RFC 2734 says: "IP-capable nodes may operate with an MTU size larger than the default [1500 octets], but the means by which a larger MTU is configured are beyond the scope of this document." Allow users to set an MTU bigger than 1500. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | ieee1394: unexport highlevel_host_resetAdrian Bunk2007-04-301-1/+0Star
| | | | | | | | | | | | | | highlevel_host_reset no longer has any modular users. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | ieee1394: eth1394: contain host resetStefan Richter2007-04-301-4/+2Star
| | | | | | | | | | | | | | | | | | | | Call only eth1394's own host reset handler from .tx_timeout, not the reset hooks of all other IEEE 1394 drivers. A minor drawback of this patch is that ether1394_host_reset by timeout is not serialized against ether1394_host_reset by bus reset. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | ieee1394: eth1394: shorter error messagesStefan Richter2007-04-301-24/+16Star
| | | | | | | | Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | ieee1394: eth1394: correct a memset argumentStefan Richter2007-04-301-1/+1
| | | | | | | | | | | | The old argument calculated the correct value in a wrong way. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | ieee1394: eth1394: refactor .probe and .updateStefan Richter2007-04-301-32/+16Star
| | | | | | | | | | | | | | Move common code into an extra function. This implicitly adds a missing node_info->fifo = CSR1212_INVALID_ADDR_SPACE; to .update. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | ieee1394: eth1394: .probe and .update may sleepStefan Richter2007-04-301-8/+4Star
| | | | | | | | Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | ieee1394: eth1394: coding styleStefan Richter2007-04-302-244/+206Star
| | | | | | | | | | | | | | Adjust white space and line wraps. Remove unnecessary parentheses and braces, unused macros, and some of the more redundant comments. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | ieee1394: eth1394: Move common recv_init code to helper functionJean Delvare2007-04-301-40/+31Star
| | | | | | | | | | | | | | | | | | There is some common code between ether1394_open and ether1394_add_host which can be moved to a separate helper function for a slightly smaller eth1394 driver (-160 bytes on i386.) Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | ieee1394: eth1394: don't autoload by hotplug when ohci1394 startsStefan Richter2007-04-305-86/+36Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Until now, ieee1394 put an IP-over-1394 capability entry into each new host's config ROM. As soon as the controller was initialized --- i.e. right after modprobe ohci1394 --- this entry triggered a hotplug event which typically caused auto-loading of eth1394. This irritated or annoyed many users and distributors. Of course they could blacklist eth1394, but then ieee1394 wrongly advertized IP-over- 1394 capability to the FireWire bus. Therefore - remove the offending kernel config option IEEE1394_CONFIG_ROM_IP1394, - let eth1394 add the ROM entry by itself, i.e. only after eth1394 was loaded. This fixes http://bugzilla.kernel.org/show_bug.cgi?id=7793 . To emulate the behaviour of older kernels, simply add the following to to /etc/modprobe.conf: install ohci1394 /sbin/modprobe eth1394; \ /sbin/modprobe --ignore-install ohci1394 Note, autoloading of eth1394 when an _external_ IP-over-1394 capable device is discovered is _not_ affected by this patch. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | ieee1394: eth1394: reduce excessive function inliningStefan Richter2007-04-301-38/+36Star
| | | | | | | | | | | | | | | | | | Shrinks eth1394.ko by about 5%. Many of these functions have only one caller and are therefore auto- inlined anyway. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | ieee1394: eth1394: clean up host removalStefan Richter2007-04-301-17/+10Star
| | | | | | | | | | | | ether1394_add_host() guarantees that hi->dev != NULL if hi != NULL. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | ieee1394: eth1394: unregister address space in failure caseStefan Richter2007-04-301-7/+6Star
| | | | | | | | | | | | | | Warn if hpsb_allocate_and_register_addrspace() failed. Unregister the address space if something else failed. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | ieee1394: send async streams at S100Stefan Richter2007-04-301-0/+7
| | | | | | | | | | | | | | The comment says it all. This affects only asynchronous streams sent via raw1394; the eth1394 driver has own code and needs an own fix. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | ieee1394: SPIN_LOCK_UNLOCKED cleanupMilind Arun Choudhary2007-04-301-1/+1
| | | | | | | | | | | | | | SPIN_LOCK_UNLOCKED cleanup,use DEFINE_SPINLOCK instead Signed-off-by: Milind Arun Choudhary <milindchoudhary@gmail.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | ieee1394: nodemgr: unify some error messagesStefan Richter2007-04-301-8/+5Star
| | | | | | | | | | | | Shrinks object file size a little bit. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | ieee1394: nodemgr: less noise in dmesgStefan Richter2007-04-301-7/+8
| | | | | | | | | | | | | | Everytime when eth1394 or a libraw1394 client updates the configuration ROM, a certain sysfs attribute cannot be added since it already exists. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | ieee1394: unroll a weird macroStefan Richter2007-04-301-50/+41Star
| | | | | | | | | | | | | | | | | | | | | | | | This is a coding style touch-up for ieee1394's handle_incoming_packet(). A preprocessor macro contained hardwired variable names and, even worse, the 'break' keyword. This macro is now unrolled and removed. Also, all 'break's which had the effect of a return are replaced by return. And a FIXME comment is brought up to date. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | ieee1394: iso.c needs sched.hAndrew Morton2007-04-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | alpha: drivers/ieee1394/iso.c: In function 'hpsb_iso_xmit_sync': drivers/ieee1394/iso.c:440: error: invalid use of undefined type 'struct task_struct' drivers/ieee1394/iso.c:440: error: 'TASK_INTERRUPTIBLE' undeclared (first use in this function) drivers/ieee1394/iso.c:440: error: (Each undeclared identifier is reported only once drivers/ieee1394/iso.c:440: error: for each function it appears in.) drivers/ieee1394/iso.c:440: warning: implicit declaration of function 'signal_pending' drivers/ieee1394/iso.c:440: error: invalid use of undefined type 'struct task_struct' drivers/ieee1394/iso.c:440: warning: implicit declaration of function 'schedule' drivers/ieee1394/iso.c: In function 'hpsb_iso_wake': drivers/ieee1394/iso.c:562: error: 'TASK_INTERRUPTIBLE' undeclared (first use in this function) Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (brought into alphabetic order)
* | ieee1394: some more includesStefan Richter2007-04-302-0/+4
| | | | | | | | Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | ieee1394: ieee1394_transactions needs sched.hTorsten Kaiser2007-04-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | drivers/ieee1394/ieee1394_transactions.c fails for me if CONFIG_SMP=n gcc complains: CC drivers/ieee1394/ieee1394_transactions.o drivers/ieee1394/ieee1394_transactions.c: In function 'hpsb_get_tlabel': drivers/ieee1394/ieee1394_transactions.c:183: error: 'TASK_INTERRUPTIBLE' undeclared (first use in this function) drivers/ieee1394/ieee1394_transactions.c:183: error: (Each undeclared identifier is reported only once Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (added comment)
* | ieee1394: ieee1394_core printk formatRandy Dunlap2007-04-301-1/+1
| | | | | | | | | | | | | | | | Fix printk format string: drivers/ieee1394/ieee1394_core.c:702: warning: format '%d' expects type 'int', but argument 2 has type 'size_t' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-15 11:59:42 +0200