summaryrefslogtreecommitdiffstats
path: root/drivers/input/touchscreen
Commit message (Collapse)AuthorAgeFilesLines
* input: ti_am335x_tsc: ACK the HW_PEN irq in ISRSebastian Andrzej Siewior2013-06-121-0/+6
| | | | | | | | | | The interrupt source IRQENB_HW_PEN is enabled in suspend and suposed to be used as a wake up source. Once this interrupt source is unmaksed, the devices ends up in ISR and never continues. This change ACKs the interrupt and disables it so the system does not freeze. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
* input: ti_am335x_adc: use only FIFO0 and clean up a littleSebastian Andrzej Siewior2013-06-121-37/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver programs a threshold of "coordinate_readouts" say 5. The REG_FIFO0THR registers says it should it be programmed to "threshold minus one". The driver does not expect just 5 coordinates but 5 * 2 + 2. Multiplied by two because 5 for X and 5 for Y and plus 2 because we have two Z. The whole thing kind of works because It reads the 5 coordinates for X and Y from FIFO0 and FIFO1 and the last element in each FIFO is ignored within the loop and read later. Nothing guaranties that FIFO1 is ready by the time it is read. In fact I could see that that FIFO1 reaturns for Y channels 8,9, 10, 12, 6 and for Y channel 7 for Z. The problem is that channel 7 and channel 12 got somehow mixed up. The other Problem is that FIFO1 is also used by the IIO part leading to wrong results if both (tsc & adc) are used. The patch tries to clean up the whole thing a little: - Remove the +1 and -1 in REG_STEPCONFIG, REG_STEPDELAY and its counter part in the for loop. This is just confusing. - Use only FIFO0 in TSC. The fifo has space for 64 entries so should be fine. - Read the whole FIFO in one function and check the channel. - in case we dawdle around, make sure we only read a multiple of our coordinate set. On the second interrupt we will cleanup the remaining enties. Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
* mfd: input: ti_am335x_tsc: rename device from tsc to TI-am335x-tscSebastian Andrzej Siewior2013-06-121-1/+1
| | | | | | | tsc is a very generic name. This patch adds a TI and HW prefix to it less generic. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
* input: ti_am33x_tsc: remove platform_data supportSebastian Andrzej Siewior2013-06-121-24/+1Star
| | | | | | | | This patch removes access to platform data mfd_tscadc_board because the platform is DT only. Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
* input: ti_am33x_tsc: Add DT supportPatil, Rachna2013-06-121-23/+82
| | | | | | | | | | | | This patch adds DT support to touch driver. It also provides a binding document which is used by the MFD and IIO part of the device. This patch also renames steps_to_configure to coordinate_readouts because the original name misleads the purpose of the variable. Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com> Signed-off-by: Patil, Rachna <rachna@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
* input: ti_am33x_tsc: remove unwanted fifo flushPatil, Rachna2013-06-121-10/+0Star
| | | | | | | | | When touchscreen and ADC are used together, this unwanted fifo flush leads to loss of ADC data. Signed-off-by: Patil, Rachna <rachna@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
* input: ti_am33x_tsc: Order of TSC wires, made configurablePatil, Rachna2013-06-121-16/+86
| | | | | | | | | | | | | The current driver expected touchscreen input wires(XP,XN,YP,YN) to be connected in a particular order. Making changes to accept this as platform data. Sebastian reworked the original patch and removed a lot of the not required pieces. Signed-off-by: Patil, Rachna <rachna@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
* input: ti_am33x_tsc: Step enable bits made configurablePatil, Rachna2013-06-121-2/+10
| | | | | | | | | | | | | | | | | | Current code has hard coded value written to step enable bits. Now the bits are updated based on how many steps are needed to be configured got from platform data. The user needs to take care not to exceed the count more than 16. While using ADC and TSC one should take care to set this parameter correctly. Sebastian added the common lock and moved the code, that manipulates the steps, from into the mfd module. Signed-off-by: Patil, Rachna <rachna@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
* mfd: input: iio: ti_am335x_adc: use one structure for ti_tscadc_devSebastian Andrzej Siewior2013-06-121-7/+9
| | | | | | | | | | | | The mfd driver creates platform data for the child devices and it is the ti_tscadc_dev struct. This struct is copied for the two devices. The copy of the structure makes a common lock in this structure a little less usefull. Therefore the platform data is not a pointer to the structure and the same structure is used. While doing the change I noticed that the suspend/resume code assumes the wrong pointer for ti_tscadc_dev and this has been fixed as well. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
* Input: egalax_ts - ABS_MT_POSITION_Y not reported wellHeiko Abraham2013-05-061-1/+1
| | | | | | | | | The egalax_ts touchscreen modul not report ABS_MT_POSITION_Y proper. As result it may be, that upper software levels only receive x coordinates well. Signed-off-by: Heiko Abraham <abrahamh@web.de> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: st1232 - add reset pin handlingBastian Hecht2013-04-151-4/+43
| | | | | | | | | | | We add the possibility to hand over a GPIO number for the reset pin. This way we can remove existing board code that takes care of it and group this information properly in the platform data or in the device tree configuration. Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: st1232 - convert to devm_* infrastructureLaurent Pinchart2013-04-151-22/+12Star
| | | | | | | Use the devm_* managed functions to allocate resources. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: ad7877 - use spi_get_drvdata() and spi_set_drvdata()Jingoo Han2013-04-081-5/+5
| | | | | | | | | Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: ads7846 - use spi_get_drvdata() and spi_set_drvdata()Jingoo Han2013-04-081-2/+2
| | | | | | | | | Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: eeti_ts - remove redundant null checkSachin Kamat2013-03-311-2/+1Star
| | | | | | | | 'pdata' is already dereferenced earlier. Hence this check is meaningless. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: edt-ft5x06 - remove redundant null check before kfreeSachin Kamat2013-03-311-2/+1Star
| | | | | | | | kfree on a null pointer is a no-op. Hence null check is not necessary. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: mc13783_ts - use module_platform_driver_probe()Fabio Porcedda2013-03-181-11/+1Star
| | | | | | | | | This patch converts the drivers to use the module_platform_driver_probe() macro which makes the code smaller and a bit simpler. Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: atmel-wm97xx - use module_platform_driver_probe macroSachin Kamat2013-03-181-11/+1Star
| | | | | | | | module_platform_driver_probe() eliminates the boilerplate and simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Merge tag 'v3.9-rc3' into nextDmitry Torokhov2013-03-189-544/+518Star
|\ | | | | | | | | Merge with mainline to bring in module_platform_driver_probe() and devm_ioremap_resource().
| * Merge branch 'for-linus' of ↵Linus Torvalds2013-03-112-10/+31
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "Except for the largish change to the ALPS driver adding "Dolphin V1" support and Wacom getting a new signature of yet another device, the rest are straightforward driver fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: mms114 - Fix regulator enable and disable paths Input: ads7864 - check return value of regulator enable Input: tc3589x-keypad - fix keymap size Input: wacom - add support for 0x10d Input: ALPS - update documentation for recent touchpad driver mods Input: ALPS - add "Dolphin V1" touchpad support Input: ALPS - remove unused argument to alps_enter_command_mode() Input: cypress_ps2 - fix trackpadi found in Dell XPS12
| | * Input: mms114 - Fix regulator enable and disable pathsMark Brown2013-03-111-9/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When it uses regulators the mms114 driver checks to see if it managed to acquire regulators and ignores errors. This is not the intended usage and not great style in general. Since the driver already refuses to probe if it fails to allocate the regulators simply make the enable and disable calls unconditional and add appropriate error handling, including adding cleanup of the regulators if setup_reg() fails. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| | * Input: ads7864 - check return value of regulator enableMark Brown2013-03-111-1/+6
| | | | | | | | | | | | | | | | | | | | | At least print a warning if we can't power the device up. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * | Atmel MXT touchscreen: increase reset timeoutsLinus Torvalds2013-03-091-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a more complete atmel patch-series out by Nick Dyer that fixes this and other things, but in the meantime this is the minimal thing to get the touchscreen going on (at least my) Pixel Chromebook. Not that I want my dirty fingers near that beautiful screen, but it seems that a non-initialized touchscreen will also end up being a constant wakeup source, so you have to disable it to go to sleep. And it's easier to just fix the initialization sequence. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | Input: atmel_mxt_ts - Support for touchpad variantDaniel Kurtz2013-03-091-2/+62
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This same driver can be used by atmel based touchscreens and touchpads (buttonpads). Platform data may specify a device is a touchpad using the is_tp flag. This will cause the driver to perform some touchpad specific initializations, such as: * register input device name "Atmel maXTouch Touchpad" instead of Touchscreen. * register BTN_LEFT & BTN_TOOL_* event types. * register axis resolution (as a fixed constant, for now) * register BUTTONPAD property * process GPIO buttons using reportid T19 Input event GPIO mapping is done by the platform data key_map array. key_map[x] should contain the KEY or BTN code to send when processing GPIOx from T19. To specify a GPIO as not an input source, populate with KEY_RESERVED, or 0. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Benson Leung <bleung@chromium.org> Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Tested-by: Olof Johansson <olof@lixom.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | Merge branch 'for-linus' of ↵Linus Torvalds2013-02-206-43/+21Star
| |\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "Two new touchpad drivers - Cypress APA I2C Trackpad and Cypress PS/2 touchpad and a big update to ALPS driver from Kevin Cernekee that adds support for "Rushmore" touchpads and paves way for adding support for "Dolphin" touchpads. There is also a new input driver for Goldfish emulator and also Android keyreset driver was folded into SysRq code. A few more drivers were updated with device tree bindings and others got some small cleanups and fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (55 commits) Input: cyttsp-spi - remove duplicate MODULE_ALIAS() Input: tsc2005 - add MODULE_ALIAS Input: tegra-kbc - require CONFIG_OF, remove platform data Input: synaptics - initialize pointer emulation usage Input: MT - do not apply filtering on emulated events Input: bma150 - make some defines public and fix some comments Input: bma150 - fix checking pm_runtime_get_sync() return value Input: ALPS - enable trackstick on Rushmore touchpads Input: ALPS - add support for "Rushmore" touchpads Input: ALPS - make the V3 packet field decoder "pluggable" Input: ALPS - move pixel and bitmap info into alps_data struct Input: ALPS - fix command mode check Input: ALPS - rework detection of Pinnacle AGx touchpads Input: ALPS - move {addr,nibble}_command settings into alps_set_defaults() Input: ALPS - use function pointers for different protocol handlers Input: ALPS - rework detection sequence Input: ALPS - introduce helper function for repeated commands Input: ALPS - move alps_get_model() down below hw_init code Input: ALPS - copy "model" info into alps_data struct Input: ALPS - document the alps.h data structures ...
| * | Merge branch 'for-linus' of ↵Linus Torvalds2012-12-1843-730/+377Star
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull second round of input updates from Dmitry Torokhov: "As usual, there are a couple of new drivers, input core now supports managed input devices (devres), a slew of drivers now have device tree support and a bunch of fixes and cleanups." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (71 commits) Input: walkera0701 - fix crash on startup Input: matrix-keymap - provide a proper module license Input: gpio_keys_polled - switch to using gpio_request_one() Input: gpio_keys - switch to using gpio_request_one() Input: wacom - fix touch support for Bamboo Fun CTH-461 Input: xpad - add a few new VID/PID combinations Input: xpad - minor formatting fixes Input: gpio-keys-polled - honor 'autorepeat' setting in platform data Input: tca8418-keypad - switch to using managed resources Input: tca8418_keypad - increase severity of failures in probe() Input: tca8418_keypad - move device ID tables closer to where they are used Input: tca8418_keypad - use dev_get_platdata() to retrieve platform data Input: tca8418_keypad - use a temporary variable for parent device Input: tca8418_keypad - add support for shared interrupt Input: tca8418_keypad - add support for device tree bindings Input: remove Compaq iPAQ H3600 (Bitsy) touchscreen driver Input: bu21013_ts - add support for Device Tree booting Input: bu21013_ts - move GPIO init and exit functions into the driver Input: bu21013_ts - request regulator that actually exists ARM: ux500: Strip out duplicate touch screen platform information ...
| * \ \ Merge tag 'mfd-3.8-1' of ↵Linus Torvalds2012-12-175-529/+422Star
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFS update from Samuel Ortiz: "This is the MFD patch set for the 3.8 merge window. We have several new drivers, most of the time coming with their sub devices drivers: - Austria Microsystem's AS3711 - Nano River's viperboard - TI's TPS80031, AM335x TS/ADC, - Realtek's MMC/memstick card reader - Nokia's retu We also got some notable cleanups and improvements: - tps6586x got converted to IRQ domains. - tps65910 and tps65090 moved to the regmap IRQ API. - STMPE is now Device Tree aware. - A general twl6040 and twl-core cleanup, with moves to the regmap I/O and IRQ APIs and a conversion to the recently added PWM framework. - sta2x11 gained regmap support. Then the rest is mostly tiny cleanups and fixes, among which we have Mark's wm5xxx and wm8xxx patchset." Far amount of annoying but largely trivial conflicts. Many due to __devinit/exit removal, others due to one or two of the new drivers also having come in through another tree. * tag 'mfd-3.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (119 commits) mfd: tps6507x: Convert to devm_kzalloc mfd: stmpe: Update DT support for stmpe driver mfd: wm5102: Add readback of DSP status 3 register mfd: arizona: Log if we fail to create the primary IRQ domain mfd: tps80031: MFD_TPS80031 needs to select REGMAP_IRQ mfd: tps80031: Add terminating entry for tps80031_id_table mfd: sta2x11: Fix potential NULL pointer dereference in __sta2x11_mfd_mask() mfd: wm5102: Add tuning for revision B mfd: arizona: Defer patch initialistation until after first device boot mfd: tps65910: Fix wrong ack_base register mfd: tps65910: Remove unused data mfd: stmpe: Get rid of irq_invert_polarity mfd: ab8500-core: Fix invalid free of devm_ allocated data mfd: wm5102: Mark DSP memory regions as volatile mfd: wm5102: Correct default for LDO1_CONTROL_2 mfd: arizona: Register haptics devices mfd: wm8994: Make current device behaviour the default mfd: tps65090: MFD_TPS65090 needs to select REGMAP_IRQ mfd: Fix stmpe.c build when OF is not enabled mfd: jz4740-adc: Use devm_kzalloc ...
| | * | | Input: da9052_tsi.c: Fix interrupt handlingFabio Estevam2012-11-201-39/+20Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently da9062_tsi does not probe and it fails as follows: da9052 1-0048: Unable to determine device interrupts Use the new da9052 irq functions and allow the driver to probe and operate correctly. Tested on mx53qsb board using 'evtest' tool. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: <linux-input@vger.kernel.org> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| | * | | input: TSC: ti_tsc: Convert TSC into a MFDevicePatil, Rachna2012-11-052-222/+98Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch converts touchscreen into a MFD client. All the register definitions, clock initialization, etc has been moved to MFD core driver. Signed-off-by: Patil, Rachna <rachna@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| | * | | input: TSC: ti_tscadc: Rename the existing touchscreen driverPatil, Rachna2012-11-053-51/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make way for addition of MFD driver. The existing touchsreen driver is a MFD client. For better readability we rename the file to indicate its functionality as only touchscreen. Signed-off-by: Patil, Rachna <rachna@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| | * | | input: TSC: ti_tscadc: Remove definition of End Of Interrupt registerPatil, Rachna2012-11-051-3/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The touchscreen IP uses level sensitive interrupts rather than edge sensitive interrupts and therefore the is no need to use the EOI register to have the module re-strobe the interrupt line if there pending interrupts exist. Signed-off-by: Patil, Rachna <rachna@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| | * | | input: TSC: ti_tscadc: set FIFO0 threshold InterruptPatil, Rachna2012-11-051-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Code currently uses FIFO1 threshold interrupt. since this is a MFD, Dedicating FIFO0 to touchscreen and making way for other devices to use FIFO1 as well. The FIFO can be shared between 2 devices but since the interrupt used is threshold interrupt on FIFO1, we would end up having wrong interrupts. Hence changing the same. Signed-off-by: Patil, Rachna <rachna@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| | * | | input: TSC: ti_tscadc: Add Step configuration as platform dataPatil, Rachna2012-11-051-12/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are 16 programmable Step Configuration registers which are used by the sequencer. Program the Steps in order to configure a channel input to be sampled. If the same step is applied several times, the coordinate values read are more accurate. Hence we provide the user an option of how many steps should be configured. For ex: If this value is assigned as 4, This means that 4 steps are applied to read x co-ordinate and 4 steps to read y co-ordinate. Furtheron the interrupt handler already holds code to use delta filter and report the best value out of these values to the input sub-system. Signed-off-by: Patil, Rachna <rachna@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| | * | | input: TSC: ti_tscadc: Correct register usagePatil, Rachna2012-11-051-46/+82
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch cleans up the wrong register definitions and usage for touchscreen controller. Bit masks were not defined earlier. For ex: consider a register define as: write(xyz, ABC) ABC is expected to be written to register bits 0-11. Here we see that value written is as expected, but this write is also affecting all the remaining bits of xyz. The remaining bits hold the default value as 0 and the write also sets it to zero. Hence wrong usage were not causing user visible bugs. Due to these reasons it was difficult to follow when compared with TRM. Unused definitions are also removed. Since there is change in some naming convention because of all the above mentioned reasons, the same has been updated throughout the code. Bit declarations are grouped to increase readability. Signed-off-by: Patil, Rachna <rachna@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * | | | Merge tag 'headers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2012-12-121-1/+1
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM SoC Header cleanups from Olof Johansson: "This is a collection of header file cleanups, mostly for OMAP and AT91, that keeps moving the platforms in the direction of multiplatform by removing the need for mach-dependent header files used in drivers and other places." Fix up mostly trivial conflicts as per Olof. * tag 'headers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (106 commits) ARM: OMAP2+: Move iommu/iovmm headers to platform_data ARM: OMAP2+: Make some definitions local ARM: OMAP2+: Move iommu2 to drivers/iommu/omap-iommu2.c ARM: OMAP2+: Move plat/iovmm.h to include/linux/omap-iommu.h ARM: OMAP2+: Move iopgtable header to drivers/iommu/ ARM: OMAP: Merge iommu2.h into iommu.h atmel: move ATMEL_MAX_UART to platform_data/atmel.h ARM: OMAP: Remove omap_init_consistent_dma_size() arm: at91: move at91rm9200 rtc header in drivers/rtc arm: at91: move reset controller header to arm/arm/mach-at91 arm: at91: move pit define to the driver arm: at91: move at91_shdwc.h to arch/arm/mach-at91 arm: at91: move board header to arch/arm/mach-at91 arn: at91: move at91_tc.h to arch/arm/mach-at91 arm: at91 move at91_aic.h to arch/arm/mach-at91 arm: at91 move board.h to arch/arm/mach-at91 arm: at91: move platfarm_data to include/linux/platform_data/atmel.h arm: at91: drop machine defconfig ARM: OMAP: Remove NEED_MACH_GPIO_H ARM: OMAP: Remove unnecessary mach and plat includes ...
| | * | | | arm: at91: move platfarm_data to include/linux/platform_data/atmel.hJean-Christophe PLAGNIOL-VILLARD2012-11-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
* | | | | | Input: wm9712 - fix dev_dbg newlinesMarkus Pargmann2013-03-121-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | dev_dbg should end with a new line. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | | | | Input: wm9712 - fix wrong pen up readingsMarkus Pargmann2013-03-121-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Often a reading can be wrong. This patch assures that this is really a pen up event and not a false reading. Based on wm9712: pen up by Teresa Gámez and Christian Hemp. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | | | | Input: wm9712 - fix return code for wrong sampleMarkus Pargmann2013-03-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of interpreting a wrong measurement as pen up, we should try to read again. Based on wm9712: pen up by Teresa Gámez and Christian Hemp. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | | | | Input: wm97xx - drop out of range inputsMarkus Pargmann2013-03-121-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With fast movements, there occured some out of screen jumps with my touchscreen. The abs_x and abs_y module parameters should fix this by default, but the driver doesn't actively checks the x/y coordinates. Instead it seems that the input layer was supposed to drop out of range inputs, as described in the comments: "These parameters are used to help the input layer discard out of range readings and reduce jitter etc" The input layer documentation describes that values that are not in the absolute range are also accepted. So this patch adds a check within the driver. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | | | | Input: auo-pixcir-ts - switch to using managed resourcesDmitry Torokhov2013-02-261-94/+69Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This simplifies error unwinding and device teardown. Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | | | | Input: auo_pixcir_ts - add devicetree supportHeiko Stübner2013-02-251-5/+69
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the necessary code to create the needed platformdata from devicetree informations. The interrupt mode of the chip is not set via devicetree, as it is not a property of the hardware but instead only a preferred type of operation. This should probably be made settable via configfs in the future. The option set as default is the mode the datasheet mentions as default. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | | | | Input: auo_pixcir_ts - keep own pointer to platform_dataHeiko Stübner2013-02-251-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When supporting devicetree the platformdata may not necessarily come from the dev but may be generated in the driver instead. Therefore keep the pointer in the driver struct instead of using dev.platform_data. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | | | | Input: auo-pixcir-ts - handle reset gpio directlyHeiko Stübner2013-02-251-6/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Devicetree based platforms don't handle device callbacks very well and until now no board has come along that needs more extended hwinit than pulling the rst gpio high. Therefore pull the reset handling directly into the driver and remove the callbacks from the driver. If extended device setup is needed at some later point, power-sequences would probably be the solution of choice. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | | | | Input: auo-pixcir-ts - set input direction for interrupt gpioHeiko Stübner2013-02-251-0/+8
| |_|_|_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously the gpio was not configured at all. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | | | Input: cyttsp-spi - remove duplicate MODULE_ALIAS()Dmitry Torokhov2013-02-171-1/+0Star
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | | | Input: tsc2005 - add MODULE_ALIASPali Rohár2013-02-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This enables autoloading of tsc2005 driver when is compiled as a module. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | | | Input: add couple of missing GENERIC_HARDIRQS dependenciesHeiko Carstens2013-02-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When removing the !S390 dependency from drivers/input/Kconfig a couple of drivers don't compile because they have a dependency on GENERIC_HARDIRQS. So add the missing dependencies. Fixes e.g. this one: drivers/input/keyboard/lm8323.c: In function ‘lm8323_suspend’: drivers/input/keyboard/lm8323.c:801:2: error: implicit declaration of function ‘irq_set_irq_wake’ [-Werror=implicit-function-declaration] Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | | | Input: mms114 - switch to using managed resourcesSachin Kamat2013-01-171-38/+16Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | devm_* APIs are device managed and make the exit and clean up code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Laxman Dewangan<ldewangan@nvidia.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | | | Input: wm831x-ts - convert to devm_input_allocate_device()Mark Brown2012-12-241-3/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-23 09:21:11 +0200