summaryrefslogtreecommitdiffstats
path: root/drivers/iommu/iova.c
Commit message (Collapse)AuthorAgeFilesLines
* iommu/iova: Fix tracking of recently failed iova addressRobert Richter2019-03-221-2/+3
| | | | | | | | | | | | | | | If a 32 bit allocation request is too big to possibly succeed, it early exits with a failure and then should never update max32_alloc_ size. This patch fixes current code, now the size is only updated if the slow path failed while walking the tree. Without the fix the allocation may enter the slow path again even if there was a failure before of a request with the same or a smaller size. Cc: <stable@vger.kernel.org> # 4.20+ Fixes: bee60e94a1e2 ("iommu/iova: Optimise attempts to allocate iova from 32bit address range") Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Robert Richter <rrichter@marvell.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu/iova: Optimise attempts to allocate iova from 32bit address rangeGanapatrao Kulkarni2018-09-251-7/+15
| | | | | | | | | | | | | As an optimisation for PCI devices, there is always first attempt been made to allocate iova from SAC address range. This will lead to unnecessary attempts, when there are no free ranges available. Adding fix to track recently failed iova address size and allow further attempts, only if requested size is lesser than a failed size. The size is updated when any replenish happens. Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* treewide: setup_timer() -> timer_setup()Kees Cook2017-11-221-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This converts all remaining cases of the old setup_timer() API into using timer_setup(), where the callback argument is the structure already holding the struct timer_list. These should have no behavioral changes, since they just change which pointer is passed into the callback with the same available pointers after conversion. It handles the following examples, in addition to some other variations. Casting from unsigned long: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... setup_timer(&ptr->my_timer, my_callback, ptr); and forced object casts: void my_callback(struct something *ptr) { ... } ... setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr); become: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... timer_setup(&ptr->my_timer, my_callback, 0); Direct function assignments: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... ptr->my_timer.function = my_callback; have a temporary cast added, along with converting the args: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback; And finally, callbacks without a data assignment: void my_callback(unsigned long data) { ... } ... setup_timer(&ptr->my_timer, my_callback, 0); have their argument renamed to verify they're unused during conversion: void my_callback(struct timer_list *unused) { ... } ... timer_setup(&ptr->my_timer, my_callback, 0); The conversion is done with the following Coccinelle script: spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup.cocci @fix_address_of@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_timer, NULL, _E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E->_timer, NULL, (_cast_data)_E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E._timer, NULL, &_E); +timer_setup(&_E._timer, NULL, 0); | -setup_timer(&_E._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_timer, _callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | _E->_timer@_stl.function = _callback; | _E->_timer@_stl.function = &_callback; | _E->_timer@_stl.function = (_cast_func)_callback; | _E->_timer@_stl.function = (_cast_func)&_callback; | _E._timer@_stl.function = _callback; | _E._timer@_stl.function = &_callback; | _E._timer@_stl.function = (_cast_func)_callback; | _E._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_timer, _callback, 0); +setup_timer(&_E->_timer, _callback, (_cast_data)_E); | -timer_setup(&_E._timer, _callback, 0); +setup_timer(&_E._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_timer | -(_cast_data)&_E +&_E._timer | -_E +&_E->_timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_timer, _callback, 0); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0L); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0UL); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0L); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0UL); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_timer, _callback, 0); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0L); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0UL); +timer_setup(&_timer, _callback, 0); | -setup_timer(_timer, _callback, 0); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0L); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0UL); +timer_setup(_timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
* iommu/iova: Use raw_cpu_ptr() instead of get_cpu_ptr() for ->fqSebastian Andrzej Siewior2017-11-061-3/+1Star
| | | | | | | | | | | | | | | | | get_cpu_ptr() disabled preemption and returns the ->fq object of the current CPU. raw_cpu_ptr() does the same except that it not disable preemption which means the scheduler can move it to another CPU after it obtained the per-CPU object. In this case this is not bad because the data structure itself is protected with a spin_lock. This change shouldn't matter however on RT it does because the sleeping lock can't be accessed with disabled preemption. Cc: Joerg Roedel <joro@8bytes.org> Cc: iommu@lists.linux-foundation.org Reported-by: vinadhy@gmail.com Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
* iommu/iova: Make rcache flush optional on IOVA allocation failureTomasz Nowicki2017-10-121-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since IOVA allocation failure is not unusual case we need to flush CPUs' rcache in hope we will succeed in next round. However, it is useful to decide whether we need rcache flush step because of two reasons: - Not scalability. On large system with ~100 CPUs iterating and flushing rcache for each CPU becomes serious bottleneck so we may want to defer it. - free_cpu_cached_iovas() does not care about max PFN we are interested in. Thus we may flush our rcaches and still get no new IOVA like in the commonly used scenario: if (dma_limit > DMA_BIT_MASK(32) && dev_is_pci(dev)) iova = alloc_iova_fast(iovad, iova_len, DMA_BIT_MASK(32) >> shift); if (!iova) iova = alloc_iova_fast(iovad, iova_len, dma_limit >> shift); 1. First alloc_iova_fast() call is limited to DMA_BIT_MASK(32) to get PCI devices a SAC address 2. alloc_iova() fails due to full 32-bit space 3. rcaches contain PFNs out of 32-bit space so free_cpu_cached_iovas() throws entries away for nothing and alloc_iova() fails again 4. Next alloc_iova_fast() call cannot take advantage of rcache since we have just defeated caches. In this case we pick the slowest option to proceed. This patch reworks flushed_rcache local flag to be additional function argument instead and control rcache flush step. Also, it updates all users to do the flush as the last chance. Signed-off-by: Tomasz Nowicki <Tomasz.Nowicki@caviumnetworks.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Tested-by: Nate Watterson <nwatters@codeaurora.org> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu/iova: Don't try to copy anchor nodesRobin Murphy2017-10-021-0/+3
| | | | | | | | | | | | Anchor nodes are not reserved IOVAs in the way that copy_reserved_iova() cares about - while the failure from reserve_iova() is benign since the target domain will already have its own anchor, we still don't want to be triggering spurious warnings. Reported-by: kernel test robot <fengguang.wu@intel.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Fixes: bb68b2fbfbd6 ('iommu/iova: Add rbtree anchor node') Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu/iova: Try harder to allocate from rcache magazineRobin Murphy2017-09-281-3/+12
| | | | | | | | | | | | | | | | | When devices with different DMA masks are using the same domain, or for PCI devices where we usually try a speculative 32-bit allocation first, there is a fair possibility that the top PFN of the rcache stack at any given time may be unsuitable for the lower limit, prompting a fallback to allocating anew from the rbtree. Consequently, we may end up artifically increasing pressure on the 32-bit IOVA space as unused IOVAs accumulate lower down in the rcache stacks, while callers with 32-bit masks also impose unnecessary rbtree overhead. In such cases, let's try a bit harder to satisfy the allocation locally first - scanning the whole stack should still be relatively inexpensive. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu/iova: Make rcache limit_pfn handling more robustRobin Murphy2017-09-281-3/+3
| | | | | | | | | | | | | When popping a pfn from an rcache, we are currently checking it directly against limit_pfn for viability. Since this represents iova->pfn_lo, it is technically possible for the corresponding iova->pfn_hi to be greater than limit_pfn. Although we generally get away with it in practice since limit_pfn is typically a power-of-two boundary and the IOVAs are size-aligned, it's pretty trivial to make the iova_rcache_get() path take the allocation size into account for complete safety. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu/iova: Simplify domain destructionRobin Murphy2017-09-281-39/+9Star
| | | | | | | | | | | | All put_iova_domain() should have to worry about is freeing memory - by that point the domain must no longer be live, so the act of cleaning up doesn't need to be concurrency-safe or maintain the rbtree in a self-consistent state. There's no need to waste time with locking or emptying the rcache magazines, and we can just use the postorder traversal helper to clear out the remaining rbtree entries in-place. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu/iova: Simplify cached node logicRobin Murphy2017-09-271-34/+17Star
| | | | | | | | | | | | | | | | | The logic of __get_cached_rbnode() is a little obtuse, but then __get_prev_node_of_cached_rbnode_or_last_node_and_update_limit_pfn() wouldn't exactly roll off the tongue... Now that we have the invariant that there is always a valid node to start searching downwards from, everything gets a bit easier to follow if we simplify that function to do what it says on the tin and return the cached node (or anchor node as appropriate) directly. In turn, we can then deduplicate the rb_prev() and limit_pfn logic into the main loop itself, further reduce the amount of code under the lock, and generally make the inner workings a bit less subtle. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu/iova: Add rbtree anchor nodeRobin Murphy2017-09-271-2/+13
| | | | | | | | | | | Add a permanent dummy IOVA reservation to the rbtree, such that we can always access the top of the address space instantly. The immediate benefit is that we remove the overhead of the rb_last() traversal when not using the cached node, but it also paves the way for further simplifications. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu/iova: Make dma_32bit_pfn implicitZhen Lei2017-09-271-2/+2
| | | | | | | | | | | | | | | | | | | | | Now that the cached node optimisation can apply to all allocations, the couple of users which were playing tricks with dma_32bit_pfn in order to benefit from it can stop doing so. Conversely, there is also no need for all the other users to explicitly calculate a 'real' 32-bit PFN, when init_iova_domain() can happily do that itself from the page granularity. CC: Thierry Reding <thierry.reding@gmail.com> CC: Jonathan Hunter <jonathanh@nvidia.com> CC: David Airlie <airlied@linux.ie> CC: Sudeep Dutt <sudeep.dutt@intel.com> CC: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Zhen Lei <thunder.leizhen@huawei.com> Tested-by: Nate Watterson <nwatters@codeaurora.org> [rm: use iova_shift(), rewrote commit message] Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu/iova: Extend rbtree node cachingRobin Murphy2017-09-271-32/+28Star
| | | | | | | | | | | | | | | | | | | | The cached node mechanism provides a significant performance benefit for allocations using a 32-bit DMA mask, but in the case of non-PCI devices or where the 32-bit space is full, the loss of this benefit can be significant - on large systems there can be many thousands of entries in the tree, such that walking all the way down to find free space every time becomes increasingly awful. Maintain a similar cached node for the whole IOVA space as a superset of the 32-bit space so that performance can remain much more consistent. Inspired by work by Zhen Lei <thunder.leizhen@huawei.com>. Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Zhen Lei <thunder.leizhen@huawei.com> Tested-by: Nate Watterson <nwatters@codeaurora.org> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu/iova: Optimise the padding calculationZhen Lei2017-09-271-27/+15Star
| | | | | | | | | | | | | | | | | | | | The mask for calculating the padding size doesn't change, so there's no need to recalculate it every loop iteration. Furthermore, Once we've done that, it becomes clear that we don't actually need to calculate a padding size at all - by flipping the arithmetic around, we can just combine the upper limit, size, and mask directly to check against the lower limit. For an arm64 build, this alone knocks 20% off the object code size of the entire alloc_iova() function! Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Zhen Lei <thunder.leizhen@huawei.com> Tested-by: Nate Watterson <nwatters@codeaurora.org> [rm: simplified more of the arithmetic, rewrote commit message] Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu/iova: Optimise rbtree searchingZhen Lei2017-09-271-6/+3Star
| | | | | | | | | | | | | | | | | Checking the IOVA bounds separately before deciding which direction to continue the search (if necessary) results in redundantly comparing both pfns twice each. GCC can already determine that the final comparison op is redundant and optimise it down to 3 in total, but we can go one further with a little tweak of the ordering (which makes the intent of the code that much cleaner as a bonus). Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Zhen Lei <thunder.leizhen@huawei.com> Tested-by: Nate Watterson <nwatters@codeaurora.org> [rm: rewrote commit message to clarify] Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu/iova: Add flush timerJoerg Roedel2017-08-151-0/+32
| | | | | | | | Add a timer to flush entries from the Flush-Queues every 10ms. This makes sure that no stale TLB entries remain for too long after an IOVA has been unmapped. Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu/iova: Add locking to Flush-QueuesJoerg Roedel2017-08-151-0/+11
| | | | | | | | | | | The lock is taken from the same CPU most of the time. But having it allows to flush the queue also from another CPU if necessary. This will be used by a timer to regularily flush any pending IOVAs from the Flush-Queues. Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu/iova: Add flush counters to Flush-Queue implementationJoerg Roedel2017-08-151-3/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | There are two counters: * fq_flush_start_cnt - Increased when a TLB flush is started. * fq_flush_finish_cnt - Increased when a TLB flush is finished. The fq_flush_start_cnt is assigned to every Flush-Queue entry on its creation. When freeing entries from the Flush-Queue, the value in the entry is compared to the fq_flush_finish_cnt. The entry can only be freed when its value is less than the value of fq_flush_finish_cnt. The reason for these counters it to take advantage of IOMMU TLB flushes that happened on other CPUs. These already flushed the TLB for Flush-Queue entries on other CPUs so that they can already be freed without flushing the TLB again. This makes it less likely that the Flush-Queue is full and saves IOMMU TLB flushes. Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu/iova: Implement Flush-Queue ring bufferJoerg Roedel2017-08-151-0/+80
| | | | | | | | Add a function to add entries to the Flush-Queue ring buffer. If the buffer is full, call the flush-callback and free the entries. Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu/iova: Add flush-queue data structuresJoerg Roedel2017-08-151-0/+39
| | | | | | | | | | | | This patch adds the basic data-structures to implement flush-queues in the generic IOVA code. It also adds the initialization and destroy routines for these data structures. The initialization routine is designed so that the use of this feature is optional for the users of IOVA code. Signed-off-by: Joerg Roedel <jroedel@suse.de>
*-. Merge branches 'iommu/fixes', 'arm/rockchip', 'arm/renesas', 'arm/smmu', ↵Joerg Roedel2017-06-281-18/+12Star
|\ \ | | | | | | | | | 'arm/core', 'x86/vt-d', 'x86/amd', 's390' and 'core' into next
| | * iommu/iova: Don't disable preempt around this_cpu_ptr()Sebastian Andrzej Siewior2017-06-281-6/+3Star
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 583248e6620a ("iommu/iova: Disable preemption around use of this_cpu_ptr()") disables preemption while accessing a per-CPU variable. This does keep lockdep quiet. However I don't see the point why it is bad if we get migrated after its access to another CPU. __iova_rcache_insert() and __iova_rcache_get() immediately locks the variable after obtaining it - before accessing its members. _If_ we get migrated away after retrieving the address of cpu_rcache before taking the lock then the *other* task on the same CPU will retrieve the same address of cpu_rcache and will spin on the lock. alloc_iova_fast() disables preemption while invoking free_cpu_cached_iovas() on each CPU. The function itself uses per_cpu_ptr() which does not trigger a warning (like this_cpu_ptr() does). It _could_ make sense to use get_online_cpus() instead but the we have a hotplug notifier for CPU down (and none for up) so we are good. Cc: Joerg Roedel <joro@8bytes.org> Cc: iommu@lists.linux-foundation.org Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Joerg Roedel <jroedel@suse.de>
| * iommu/iova: Sort out rbtree limit_pfn handlingRobin Murphy2017-05-171-12/+9Star
|/ | | | | | | | | | | | | | | | | | | | When walking the rbtree, the fact that iovad->start_pfn and limit_pfn are both inclusive limits creates an ambiguity once limit_pfn reaches the bottom of the address space and they overlap. Commit 5016bdb796b3 ("iommu/iova: Fix underflow bug in __alloc_and_insert_iova_range") fixed the worst side-effect of this, that of underflow wraparound leading to bogus allocations, but the remaining fallout is that any attempt to allocate start_pfn itself erroneously fails. The cleanest way to resolve the ambiguity is to simply make limit_pfn an exclusive limit when inside the guts of the rbtree. Since we're working with PFNs, representing one past the top of the address space is always possible without fear of overflow, and elsewhere it just makes life a little more straightforward. Reported-by: Aaron Sierra <asierra@xes-inc.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
*-. Merge branches 'arm/exynos', 'arm/omap', 'arm/rockchip', 'arm/mediatek', ↵Joerg Roedel2017-05-041-55/+34Star
|\ \ | | | | | | | | | 'arm/smmu', 'arm/core', 'x86/vt-d', 'x86/amd' and 'core' into next
| | * iommu/iova: Consolidate code for adding new node to iovad domain rbtreeMarek Szyprowski2017-03-211-54/+33Star
| |/ |/| | | | | | | | | | | | | | | | | This patch consolidates almost the same code used in iova_insert_rbtree() and __alloc_and_insert_iova_range() functions. While touching this code, replace BUG() with WARN_ON(1) to avoid taking down the whole system in case of corrupted iova tree or incorrect calls. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
| * iommu/iova: Fix underflow bug in __alloc_and_insert_iova_rangeNate Watterson2017-04-071-1/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Normally, calling alloc_iova() using an iova_domain with insufficient pfns remaining between start_pfn and dma_limit will fail and return a NULL pointer. Unexpectedly, if such a "full" iova_domain contains an iova with pfn_lo == 0, the alloc_iova() call will instead succeed and return an iova containing invalid pfns. This is caused by an underflow bug in __alloc_and_insert_iova_range() that occurs after walking the "full" iova tree when the search ends at the iova with pfn_lo == 0 and limit_pfn is then adjusted to be just below that (-1). This (now huge) limit_pfn gives the impression that a vast amount of space is available between it and start_pfn and thus a new iova is allocated with the invalid pfn_hi value, 0xFFF.... . To rememdy this, a check is introduced to ensure that adjustments to limit_pfn will not underflow. This issue has been observed in the wild, and is easily reproduced with the following sample code. struct iova_domain *iovad = kzalloc(sizeof(*iovad), GFP_KERNEL); struct iova *rsvd_iova, *good_iova, *bad_iova; unsigned long limit_pfn = 3; unsigned long start_pfn = 1; unsigned long va_size = 2; init_iova_domain(iovad, SZ_4K, start_pfn, limit_pfn); rsvd_iova = reserve_iova(iovad, 0, 0); good_iova = alloc_iova(iovad, va_size, limit_pfn, true); bad_iova = alloc_iova(iovad, va_size, limit_pfn, true); Prior to the patch, this yielded: *rsvd_iova == {0, 0} /* Expected */ *good_iova == {2, 3} /* Expected */ *bad_iova == {-2, -1} /* Oh no... */ After the patch, bad_iova is NULL as expected since inadequate space remains between limit_pfn and start_pfn after allocating good_iova. Signed-off-by: Nate Watterson <nwatters@codeaurora.org> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu/iova: Use rb_entry()Geliang Tang2017-01-041-12/+11Star
| | | | | | | | To make the code clearer, use rb_entry() instead of container_of() to deal with rbtree. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu/iova: Extend cached node lookup conditionRobin Murphy2016-11-151-1/+1
| | | | | | | | | | | | When searching for a free IOVA range, we optimise the tree traversal by starting from the cached32_node, instead of the last node, when limit_pfn is equal to dma_32bit_pfn. However, if limit_pfn happens to be smaller, then we'll go ahead and start from the top even though dma_32bit_pfn is still a more suitable upper bound. Since this is clearly a silly thing to do, adjust the lookup condition appropriately. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu/iova: Disable preemption around use of this_cpu_ptr()Chris Wilson2016-06-271-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Between acquiring the this_cpu_ptr() and using it, ideally we don't want to be preempted and work on another CPU's private data. this_cpu_ptr() checks whether or not preemption is disable, and get_cpu_ptr() provides a convenient wrapper for operating on the cpu ptr inside a preemption disabled critical section (which currently is provided by the spinlock). [ 167.997877] BUG: using smp_processor_id() in preemptible [00000000] code: usb-storage/216 [ 167.997940] caller is debug_smp_processor_id+0x17/0x20 [ 167.997945] CPU: 7 PID: 216 Comm: usb-storage Tainted: G U 4.7.0-rc1-gfxbench-RO_Patchwork_1057+ #1 [ 167.997948] Hardware name: Hewlett-Packard HP Pro 3500 Series/2ABF, BIOS 8.11 10/24/2012 [ 167.997951] 0000000000000000 ffff880118b7f9c8 ffffffff8140dca5 0000000000000007 [ 167.997958] ffffffff81a3a7e9 ffff880118b7f9f8 ffffffff8142a927 0000000000000000 [ 167.997965] ffff8800d499ed58 0000000000000001 00000000000fffff ffff880118b7fa08 [ 167.997971] Call Trace: [ 167.997977] [<ffffffff8140dca5>] dump_stack+0x67/0x92 [ 167.997981] [<ffffffff8142a927>] check_preemption_disabled+0xd7/0xe0 [ 167.997985] [<ffffffff8142a947>] debug_smp_processor_id+0x17/0x20 [ 167.997990] [<ffffffff81507e17>] alloc_iova_fast+0xb7/0x210 [ 167.997994] [<ffffffff8150c55f>] intel_alloc_iova+0x7f/0xd0 [ 167.997998] [<ffffffff8151021d>] intel_map_sg+0xbd/0x240 [ 167.998002] [<ffffffff810e5efd>] ? debug_lockdep_rcu_enabled+0x1d/0x20 [ 167.998009] [<ffffffff81596059>] usb_hcd_map_urb_for_dma+0x4b9/0x5a0 [ 167.998013] [<ffffffff81596d19>] usb_hcd_submit_urb+0xe9/0xaa0 [ 167.998017] [<ffffffff810cff2f>] ? mark_held_locks+0x6f/0xa0 [ 167.998022] [<ffffffff810d525c>] ? __raw_spin_lock_init+0x1c/0x50 [ 167.998025] [<ffffffff810e5efd>] ? debug_lockdep_rcu_enabled+0x1d/0x20 [ 167.998028] [<ffffffff815988f3>] usb_submit_urb+0x3f3/0x5a0 [ 167.998032] [<ffffffff810d0082>] ? trace_hardirqs_on_caller+0x122/0x1b0 [ 167.998035] [<ffffffff81599ae7>] usb_sg_wait+0x67/0x150 [ 167.998039] [<ffffffff815dc202>] usb_stor_bulk_transfer_sglist.part.3+0x82/0xd0 [ 167.998042] [<ffffffff815dc29c>] usb_stor_bulk_srb+0x4c/0x60 [ 167.998045] [<ffffffff815dc42e>] usb_stor_Bulk_transport+0x17e/0x420 [ 167.998049] [<ffffffff815dcf32>] usb_stor_invoke_transport+0x242/0x540 [ 167.998052] [<ffffffff810e5efd>] ? debug_lockdep_rcu_enabled+0x1d/0x20 [ 167.998058] [<ffffffff815dba19>] usb_stor_transparent_scsi_command+0x9/0x10 [ 167.998061] [<ffffffff815de518>] usb_stor_control_thread+0x158/0x260 [ 167.998064] [<ffffffff815de3c0>] ? fill_inquiry_response+0x20/0x20 [ 167.998067] [<ffffffff815de3c0>] ? fill_inquiry_response+0x20/0x20 [ 167.998071] [<ffffffff8109ddfa>] kthread+0xea/0x100 [ 167.998078] [<ffffffff817ac6af>] ret_from_fork+0x1f/0x40 [ 167.998081] [<ffffffff8109dd10>] ? kthread_create_on_node+0x1f0/0x1f0 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96293 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: iommu@lists.linux-foundation.org Cc: linux-kernel@vger.kernel.org Fixes: 9257b4a206fc ('iommu/iova: introduce per-cpu caching to iova allocation') Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu/iova: introduce per-cpu caching to iova allocationOmer Peleg2016-04-201-24/+393
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | IOVA allocation has two problems that impede high-throughput I/O. First, it can do a linear search over the allocated IOVA ranges. Second, the rbtree spinlock that serializes IOVA allocations becomes contended. Address these problems by creating an API for caching allocated IOVA ranges, so that the IOVA allocator isn't accessed frequently. This patch adds a per-CPU cache, from which CPUs can alloc/free IOVAs without taking the rbtree spinlock. The per-CPU caches are backed by a global cache, to avoid invoking the (linear-time) IOVA allocator without needing to make the per-CPU cache size excessive. This design is based on magazines, as described in "Magazines and Vmem: Extending the Slab Allocator to Many CPUs and Arbitrary Resources" (currently available at https://www.usenix.org/legacy/event/usenix01/bonwick.html) Adding caching on top of the existing rbtree allocator maintains the property that IOVAs are densely packed in the IO virtual address space, which is important for keeping IOMMU page table usage low. To keep the cache size reasonable, we bound the IOVA space a CPU can cache by 32 MiB (we cache a bounded number of IOVA ranges, and only ranges of size <= 128 KiB). The shared global cache is bounded at 4 MiB of IOVA space. Signed-off-by: Omer Peleg <omer@cs.technion.ac.il> [mad@cs.technion.ac.il: rebased, cleaned up and reworded the commit message] Signed-off-by: Adam Morrison <mad@cs.technion.ac.il> Reviewed-by: Shaohua Li <shli@fb.com> Reviewed-by: Ben Serebrin <serebrin@google.com> [dwmw2: split out VT-d part into a separate patch] Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* iommu: Make the iova library a moduleSakari Ailus2015-07-281-0/+4
| | | | | | | | The iova library has use outside the intel-iommu driver, thus make it a module. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* iommu: iova: Export symbolsSakari Ailus2015-07-281-0/+10
| | | | | | | | | | | | | | | | | | | | Use EXPORT_SYMBOL_GPL() to export the iova library symbols. The symbols include: init_iova_domain(); iova_cache_get(); iova_cache_put(); iova_cache_init(); alloc_iova(); find_iova(); __free_iova(); free_iova(); put_iova_domain(); reserve_iova(); copy_reserved_iova(); Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* iommu: iova: Move iova cache management to the iova librarySakari Ailus2015-07-281-34/+49
| | | | | | | This is necessary to separate intel-iommu from the iova library. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* iommu/iova: Avoid over-allocating when size-alignedRobin Murphy2015-07-281-17/+6Star
| | | | | | | | | | | | | | | | | Currently, allocating a size-aligned IOVA region quietly adjusts the actual allocation size in the process, returning a rounded-up power-of-two-sized allocation. This results in mismatched behaviour in the IOMMU driver if the original size was not a power of two, where the original size is mapped, but the rounded-up IOVA size is unmapped. Whilst some IOMMUs will happily unmap already-unmapped pages, others consider this an error, so fix it by computing the necessary alignment padding without altering the actual allocation size. Also clean up by making pad_size unsigned, since its callers always pass unsigned values and negative padding makes little sense here anyway. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* iommu: Fix checkpatch warnings for Missing a blank line after declarationsRobert Callicotte2015-05-051-0/+4
| | | | | | | | Fixed checkpatch warnings for missing blank line after declaration of struct. Signed-off-by: Robert Callicotte <rcallicotte@gmail.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu: Make IOVA domain page size explicitRobin Murphy2015-01-191-2/+10
| | | | | | | | | | | | | | | | Systems may contain heterogeneous IOMMUs supporting differing minimum page sizes, which may also not be common with the CPU page size. Thus it is practical to have an explicit notion of IOVA granularity to simplify handling of mapping and allocation constraints. As an initial step, move the IOVA page granularity from an implicit compile-time constant to a per-domain property so we can make use of it in IOVA domain context at runtime. To keep the abstraction tidy, extend the little API of inline iova_* helpers to parallel some of the equivalent PAGE_* macros. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu: Make IOVA domain low limit flexibleRobin Murphy2015-01-191-4/+6
| | | | | | | | | | | | | To share the IOVA allocator with other architectures, it needs to accommodate more general aperture restrictions; move the lower limit from a compile-time constant to a runtime domain property to allow IOVA domains with different requirements to co-exist. Also reword the slightly unclear description of alloc_iova since we're touching it anyway. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu: Consolidate IOVA allocator codeRobin Murphy2015-01-191-0/+35
| | | | | | | | | In order to share the IOVA allocator with other architectures, break the unnecssary dependency on the Intel IOMMU driver and move the remaining IOVA internals to iova.c Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu/vt-d: Update IOMMU state when memory hotplug happensJiang Liu2014-03-041-6/+58
| | | | | | | | | If static identity domain is created, IOMMU driver needs to update si_domain page table when memory hotplug event happens. Otherwise PCI device DMA operations can't access the hot-added memory regions. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
* iommu: Fix typo in iommuMasanari Iida2012-07-241-7/+7
| | | | | | | | Correct spelling typo in debug messages and comments in drivers/iommu. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* x86/ia64: intel-iommu: move to drivers/iommu/Ohad Ben-Cohen2011-06-211-0/+435
This should ease finding similarities with different platforms, with the intention of solving problems once in a generic framework which everyone can use. Note: to move intel-iommu.c, the declaration of pci_find_upstream_pcie_bridge() has to move from drivers/pci/pci.h to include/linux/pci.h. This is handled in this patch, too. As suggested, also drop DMAR's EXPERIMENTAL tag while we're at it. Compile-tested on x86_64. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-11-20 00:43:13 +0100