summaryrefslogtreecommitdiffstats
path: root/drivers/leds
Commit message (Collapse)AuthorAgeFilesLines
* leds: gpio: set led_dat->gpiod pointer for OF defined GPIO ledsLiviu Dudau2018-10-261-0/+2
| | | | | | | | | | | | | | | | | Commit 45d4c6de4e49 ("leds: gpio: Try to lookup gpiod from device") removed the common code path that set the led_dat->gpiod pointer in create_gpio_led(), but only added it back for the devices that have a valid gpio_led_platform_data structure. Calling gpio_leds_create() in gpio_led_probe() is not enough to get a valid gpiod pointer. Fortunately enough, gpio_leds_create() already gets the needed pointer, we just need to assign it to the relevant gpio_led_data structure. Fixes: 45d4c6de4e49 ("leds: gpio: Try to lookup gpiod from device") Signed-off-by: Liviu Dudau <liviu@dudau.co.uk> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: sc27xx: Add pattern_set/clear interfaces for LED controllerBaolin Wang2018-10-111-0/+121
| | | | | | | | | This patch implements the 'pattern_set'and 'pattern_clear' interfaces to support SC27XX LED breathing mode. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Acked-by: Pavel Machek <pavel@ucw.c> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: core: Introduce LED pattern triggerBaolin Wang2018-10-113-0/+419
| | | | | | | | | | | | | | | | | | This patch adds a new LED trigger that LED device can configure to employ software or hardware pattern engine. Consumers can write 'pattern' file to enable the software pattern which alters the brightness for the specified duration with one software timer. Moreover consumers can write 'hw_pattern' file to enable the hardware pattern for some LED controllers which can autonomously control brightness over time, according to some preprogrammed hardware patterns. Signed-off-by: Raphael Teysseyre <rteysseyre@gmail.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: add Panasonic AN30259A supportSimon Shields2018-09-103-0/+379
| | | | | | | | | | | | | | AN30259A is a 3-channel LED driver which uses I2C. It supports timed operation via an internal PWM clock, and variable brightness. This driver offers support for basic hardware-based blinking and brightness control. The datasheet is freely available: https://www.alliedelec.com/m/d/a9d2b3ee87c2d1a535a41dd747b1c247.pdf Signed-off-by: Simon Shields <simon@lineageos.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: gpio: Try to lookup gpiod from deviceLinus Walleij2018-09-101-30/+62
| | | | | | | | | | | | | | | | | This augments the GPIO lookup code in the GPIO LEDs to attempt to look up a GPIO descriptor from the device with index. This makes it possible to use GPIO machine look-up tables and stop passing global GPIO numbers through platform data. Using this we can stepwise convert existing board files to use machine descriptor tables and then eventually drop the legacy GPIO support and only include <linux/gpio/consumer.h> and use descriptors exclusively. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: pwm: silently error out on EPROBE_DEFERJerome Brunet2018-09-081-2/+3
| | | | | | | | When probing, if we fail to get the pwm due to probe deferal, we shouldn't print an error message. Just be silent in this case. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: Convert to using %pOFn instead of device_node.nameRob Herring2018-08-281-2/+2
| | | | | | | | | | | In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Signed-off-by: Rob Herring <robh@kernel.org> Cc: linux-leds@vger.kernel.org Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: ns2: Change unsigned to unsigned intKitone Elvis Peter2018-08-061-2/+2
| | | | | | | | Use unsigned int, because it's preferred to unsigned. Signed-off-by: Kitone Elvis Peter <elviskitone@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: gpio trigger: simplifications from core changesUwe Kleine-König2018-07-051-62/+25Star
| | | | | | | | | | The trigger core learned error handling for the activate callback and to handle device attributes. Also make use of the module_led_trigger() helper to simplify trigger registration. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: backlight trigger: simplifications from core changesUwe Kleine-König2018-07-051-43/+19Star
| | | | | | | | | | | Use the new module_led_trigger() helper. Also use attribute support from the trigger core. Drop error message on allocation failure as kzalloc() already screams loudly when failing. Use wrappers to get and set trigger data. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: activity trigger: simplifications from core changesUwe Kleine-König2018-07-051-22/+16Star
| | | | | | | | | | | | | | The trigger core learned error handling for the activate callback and can handle device attributes now. This allows simplifying the driver considerably. Note that .deactivate() is only called when .activate() succeeded, so the check for .activated can go away in .deactivate(). Also make use of module_led_trigger() and the accessor function to get and set trigger_data. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: default-on trigger: make use of module_led_trigger()Uwe Kleine-König2018-07-051-13/+1Star
| | | | | | | | This removes some boilerplate from the driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: heartbeat trigger: simplifications from core changesUwe Kleine-König2018-07-051-22/+19Star
| | | | | | | | | | | | | | The trigger core learned error handling for the activate callback and can handle device attributes now. This allows simplifying the driver considerably. Note that .deactivate() is only called when .activate() succeeded, so the check for .activated can go away in .deactivate(). Also make use of module_led_trigger() and the accessor function to get and set trigger_data. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: oneshot trigger: simplifications from core changesUwe Kleine-König2018-07-051-63/+26Star
| | | | | | | | | | | | | | The trigger core learned error handling for the activate callback and can handle device attributes now. This allows simplifying the driver considerably. Note that .deactivate() is only called when .activate() succeeded, so the check for .activated can go away in .deactivate(). Also make use of module_led_trigger() and do some minor coding style improvements. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: transient trigger: simplifications from core changesUwe Kleine-König2018-07-051-68/+30Star
| | | | | | | | | | | The trigger core learned error handling for the activate callback and can handle device attributes now. This allows simplifying the driver considerably. Note that .deactivate() is only called when .activate() succeeded, so the check for .activated can go away. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: timer trigger: simplifications from core changesUwe Kleine-König2018-07-051-40/+13Star
| | | | | | | | | | | The trigger core learned error handling for the activate callback and can handle device attributes now. This allows simplifying the driver considerably. Note that .deactivate() is only called when .activate() succeeded, so the check for .trigger_data being non-NULL can go away. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: netdev trigger: simplifications from core changesUwe Kleine-König2018-07-051-68/+31Star
| | | | | | | | | | | | | The trigger core learned error handling for the activate callback and can handle device attributes now. This allows simplifying the driver considerably. Note that .deactivate() is only called when .activate() succeeded, so the check for trigger_data being non-NULL can go away. (It was broken before because the core didn't clear .trigger_data, so it might have been non-NULL even if .activate() failed before.) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: triggers: handle .trigger_data and .activated() in the coreUwe Kleine-König2018-07-051-0/+3
| | | | | | | | | | | | This helps keeping these two fields consistent and drivers don't need to care for this themselves any more. Note that .activated isn't set to true automatically because that might confuse some triggers when deactivating (e.g. ledtrig-gpio). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: triggers: add device attribute supportUwe Kleine-König2018-07-051-0/+12
| | | | | | | | | As many triggers use device attributes, add support for these in led_trigger_set which allows simplifying the drivers accordingly. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: triggers: let struct led_trigger::activate() return an error codeUwe Kleine-König2018-07-0510-28/+63
| | | | | | | | | | | | | Given that activating a trigger can fail, let the callback return an indication. This prevents to have a trigger active according to the "trigger" sysfs attribute but not functional. All users are changed accordingly to return 0 for now. There is no intended change in behaviour. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: triggers: make the MODULE_LICENSE string match the actual licenseUwe Kleine-König2018-07-056-12/+8Star
| | | | | | | | | | | | These files are licensed under GPL version 2 only. So use "GPL v2" instead of "GPL" (which means v2 or later). Also remove an empty (but commented) line at the end of the license header which nicely proves in the context that the drivers are really v2 only :-) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: lm3692x: Support LED sync configurationDan Murphy2018-07-031-38/+120
| | | | | | | | | | | The LM36922 has one output but can sync current to 2 LED strings. The user may only use one sync so the other syncs need to be disabled. The LM36923 has 3 LED syncs. Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: lm3692x: Change DT calls to fwnode callsDan Murphy2018-07-031-17/+21
| | | | | | | | | | | Update the code to use the fwnode calls as opposed to ARM DT node api's. This allows the device to be used with either DT configurations or ACPI definitions. Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: lm3692x: Update license header to SPDXDan Murphy2018-07-031-14/+3Star
| | | | | | | | Update the license header to the current SPDX licensing format. Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: max8997: use mode when calling max8997_led_set_modeColin Ian King2018-07-031-1/+1
| | | | | | | | | | | | | Variable mode is assigned to pdata->led_pdata->mode[led->id] and yet is not being used when calling function max8997_led_set_mode. Fix this by using mode when calling max8997_led_set_mode. Cleans up clang warning: warning: variable 'mode' set but not used [-Wunused-but-set-variable] Fixes: 8584cb82f151 ("leds: Add suuport for MAX8997-LED driver") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: lt3593: update email address and switch to SPDX license headerDaniel Mack2018-07-031-19/+4Star
| | | | | | | | | | | Update the email address in the module information and in the comments and in the module information, and drop the existing boilerplate in favor of a SPDX header. Also sync the module license information with the header. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: lt3593: Add device tree probing glueDaniel Mack2018-07-031-0/+70
| | | | | | | | The binding details are described in an earlier commit that adds the documentation. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: lt3593: switch to gpiod interfaceDaniel Mack2018-07-031-14/+12Star
| | | | | | | Clean up the code a bit and transition over to the gpiod based interface. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: lt3593: merge functions and clean up codeDaniel Mack2018-07-031-68/+35Star
| | | | | | | | | | | | | | | | | In preparation to DT probe functionality, merge create_lt3593_led() into its only call-site. The DT based setup code will be quite different, so this internal helper function is of no help. This also changes the way the driver works by only handling one entry inside 'struct gpio_led_platform_data'. If multiple devices of the same type are found in a design, there should be a platform device for each of them. The only mainline user of this driver is not affected by this change. Last, use devm_led_classdev_register() instead of led_classdev_register(), so the driver's remove callback can go away. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: triggers: don't depend on LEDS_TRIGGERS twiceUwe Kleine-König2018-06-281-14/+1Star
| | | | | | | | | | All the triggers are defined in a big if LEDS_TRIGGERS...endif block. So there is no need to let each driver depend on LEDS_TRIGGERS explicitly once more. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: Modify PC Engines apu/apu2 driver to support apu3Raffaello D. Di Napoli2018-06-282-3/+46
| | | | | | | | | | | | PC Engines apu3 is an improved version of the apu2, using the same SoC and almost everything else. This patch reuses as much as possible from the apu2 definitions, to avoid redundancy. Signed-off-by: Raffaello D. Di Napoli <rafdev@dinapo.li> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: ledtrig-activity: use ktime_get_boot_ns()Arnd Bergmann2018-06-191-4/+1Star
| | | | | | | | | get_monotonic_boottime() is deprecated, so let's convert this to the simpler ktime_get_boot_ns(). Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook2018-06-1316-40/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
* leds: Use struct_size() in allocationKees Cook2018-06-131-2/+1Star
| | | | | | This case got missed by the earlier treewide struct_size() conversions. Signed-off-by: Kees Cook <keescook@chromium.org>
* leds: class: ensure workqueue is initialized before setting brightnessLuis Henriques2018-05-241-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | An application can try to set brightness before all the initialization is done, in particular before the workqueue is initialized with the call to led_init_core(). Here's a WARNING easy to trigger: [ 36.780813] WARNING: CPU: 3 PID: 1411 at ../kernel/workqueue.c:1444 __queue_work+0x37b/0x420 [ 36.780815] Modules linked in: ... [ 36.780868] CPU: 3 PID: 1411 Comm: systemd-backlig Not tainted 4.16.9-1-default #1 openSUSE Tumbleweed (unreleased) [ 36.780868] Hardware name: Dell Inc. Precision 5510/0N8J4R, BIOS 1.6.1 12/11/2017 [ 36.780870] RIP: 0010:__queue_work+0x37b/0x420 [ 36.780871] RSP: 0018:ffffaced048b7d78 EFLAGS: 00010086 [ 36.780873] RAX: 0000000000000000 RBX: ffffffffb3f01440 RCX: 0000000000000000 [ 36.780873] RDX: ffffffffc05a90d8 RSI: 0000000000000000 RDI: ffff8eac7dce2700 [ 36.780874] RBP: ffff8ea547c16400 R08: ffff8ea547800000 R09: ffff8eac7dc22700 [ 36.780875] R10: 0000000000000000 R11: 0000000000000040 R12: 0000000000000003 [ 36.780876] R13: 0000000000000200 R14: ffffffffc05a90d0 R15: ffff8eac7dce8600 [ 36.780877] FS: 00007f871e61cf40(0000) GS:ffff8eac7dcc0000(0000) knlGS:0000000000000000 [ 36.780878] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 36.780879] CR2: 000055c91115e308 CR3: 0000000883ee0005 CR4: 00000000003606e0 [ 36.780880] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 36.780880] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 36.780881] Call Trace: [ 36.780886] queue_work_on+0x81/0x90 [ 36.780889] brightness_store+0x5d/0x90 [ 36.780892] kernfs_fop_write+0x105/0x180 [ 36.780894] __vfs_write+0x26/0x150 [ 36.780897] ? common_file_perm+0x51/0x150 [ 36.780900] ? security_file_permission+0x3c/0xb0 [ 36.780901] vfs_write+0xad/0x1a0 [ 36.780903] SyS_write+0x42/0x90 [ 36.780906] do_syscall_64+0x76/0x140 [ 36.780908] entry_SYSCALL_64_after_hwframe+0x42/0xb7 [ 36.780910] RIP: 0033:0x7f871dd04c94 [ 36.780910] RSP: 002b:00007ffeb3a57d38 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 36.780912] RAX: ffffffffffffffda RBX: 000055c91115c810 RCX: 00007f871dd04c94 [ 36.780912] RDX: 0000000000000001 RSI: 000055c91115c810 RDI: 0000000000000004 [ 36.780913] RBP: 00007ffeb3a57e10 R08: 0000000000000003 R09: 0000000000000000 [ 36.780914] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001 [ 36.780914] R13: 000055c911158f30 R14: 000055c90f3a9a4e R15: 0000000000000004 [ 36.780917] Code: 74 18 e8 49 80 00 00 48 85 c0 74 0e 48 8b 40 20 48 3b 68 08 0f 84 c2 fc ff ff 0f 0b 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 <0f> 0b e9 82 fd ff ff 83 cd 02 49 8d 57 60 e9 69 fd ff ff 80 3d [ 36.780942] ---[ end trace 1fce4edad54c4017 ]--- This patch initializes and acquires the led_access mutex early in the of_led_classdev_register function, so that any application trying to write to sysfs to set brightness will block until initialization ends. Signed-off-by: Luis Henriques <lhenriques@suse.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: lm3601x: Introduce the lm3601x LED driverDan Murphy2018-05-233-0/+497
| | | | | | | | | | | | | | | | | | | Introduce the family of LED devices that can drive a torch, strobe or IR LED. The LED driver can be configured with a strobe timer to execute a strobe flash. The IR LED brightness is controlled via the torch brightness register. The data sheet for each the LM36010 and LM36011 LED drivers can be found here: http://www.ti.com/product/LM36010 http://www.ti.com/product/LM36011 Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: sc27xx: Fix return value check in sc27xx_led_probe()Wei Yongjun2018-05-221-2/+2
| | | | | | | | | | In case of error, the function dev_get_regmap() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Fixes: e081c49e30ec ("leds: Add Spreadtrum SC27xx breathing light controller driver") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: Add Spreadtrum SC27xx breathing light controller driverBaolin Wang2018-05-143-0/+256
| | | | | | | | | | | This patch adds Spreadtrum SC27xx PMIC series breathing light controller driver, which can support 3 LEDs. Each LED can work at normal PWM mode and breathing mode. Signed-off-by: Xiaotong Lu <xiaotong.lu@spreadtrum.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: wm831x-status: Use sysfs_match_string() helperAndy Shevchenko2018-05-031-16/+6Star
| | | | | | | | Use sysfs_match_string() helper instead of open coded variant. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: add LED driver for CR0014114 boardOleh Kravchenko2018-04-163-0/+329
| | | | | | | | | This patch adds a LED class driver for the RGB LEDs found on the Crane Merchandising System CR0014114 LEDs board. Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: Fix wrong dmi_match on PC Engines APU LEDsHans Ulli Kroll2018-03-201-1/+1
| | | | | | | | BIOS on APU board doesn't expose board_name property, and thus we have to rely on the product_name instead. Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: Extends disk trigger for reads and writesLinus Walleij2018-03-111-1/+11
| | | | | | | | | | | | | | | | | | | | | | | | | This adds two new disk triggers for triggering on reads and writes respectively, named "disk-read" and "disk-write". The use case comes from working on the D-Link DNS-313 NAS box. This features an RGB LED for disk activity. with these two triggers I can couple the green LED to read activity and the red LED to write activity, which gives the appropriate user feedback about what is happening on the disk. When tested it gave exactly the feedback desired. The in-kernel interface is simply changed to pass a bool indicating if the activity is write activity and update each trigger (and the composite "disk-activity" trigger) depending on what is passed in. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: Add more product/board names for PC Engines APU2Timothy Redaelli2018-02-191-2/+24
| | | | | | | | | | | | | | | PC Engines "legacy" coreboot 4.0.8 changed the product/board name from "APU2" to "apu2". PC Engines "mainline" coreboot uses, instead, "PC Engines apu2" as product/board name. This commit adds the 2 variants ("apu2" and "PC Engines apu2") of product/board name to be compatible with all the APU2 BIOSes. Fixes: 3faee9423ce0 ("leds: Add driver for PC Engines APU/APU2 LEDs") Signed-off-by: Timothy Redaelli <tredaelli@redhat.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: add driver for support Mellanox regmap LEDs for BMC and x86 platformVadim Pasternak2018-02-193-0/+291
| | | | | | | | | | | | | | | | | | | | Driver obtains LED devices according to system configuration and creates devices in form: "devicename:color:function", like The full path is to be: /sys/class/leds/mlxreg\:status\:amber/brightness After timer trigger activation: echo timer > /sys/class/leds/mlxreg\:status\:amber/trigger Attributes for LED blinking will appaer in sysfs infrastructure: /sys/class/leds/mlxreg\:status\:amber/delay_off /sys/class/leds/mlxreg\:status\:amber/delay_on LED setting is controlled through the on-board programmable devices, which exports its register map. This device could be attached to any bus type, for which register mapping is supported. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: fix Kconfig text for MLXCPLD, SYSCON, MC13783, NETXBIGVadim Pasternak2018-02-151-5/+5
| | | | | | | | It fixes grammatical errors in Kconfig file for LEDS_SYSCON, LEDS_MLXCPLD, LEDS_MC13783, LEDS_NETXBIG. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: Clarify supported chips by LM355x driverPavel Machek2018-02-121-4/+4
| | | | | | | | Clarify which controllers are supported by which driver. Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: leds-mlxcpld: Allow compilation for 32 bit archVadim Pasternak2018-02-121-1/+1
| | | | | | | | It makes leds-mlxcpld available for 32 bit architecture. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Reported-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds2018-02-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge tag 'leds_for_4.16-rc1' of ↵Linus Torvalds2018-01-3111-47/+973
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED updates from Jacek Anaszewski: "New LED class driver: - introduce LM3692x dual string driver New LED trigger: - introduce a NETDEV trigger leds-lp8860: - various fixes to align with LED framework - add regulator enable during init - DT support related improvements Minor fixes and cleanups to the LED class drivers: - leds-pwm - ledtrig-activity - leds-blinkm - leds-as3645a - ledtrig-transient" * tag 'leds_for_4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: leds: ledtrig-transient: Add SPDX license identifiers leds: lp8860: Various fixes to align with LED framework leds: lp8860: Add DT parsing to retrieve the trigger node dt: bindings: lp8860: Add trigger binding to the lp8860 leds: lp8860: Update the dt parsing for LED labeling dt: bindings: lp8860: Update DT label binding dt: bindings: lp8860: Update bindings for lp8860 leds: as3645a: Fix line over 80 characters leds: as3645a: Fix quoted string split warning leds: lm3692x: Introduce LM3692x dual string driver dt: bindings: lm3692x: Add bindings for lm3692x LED driver leds: trigger: Introduce a NETDEV trigger leds: blinkm: avoid uninitialized data use ledtrig-activity: Grammar s/a immediate/an immediate/ leds: pwm: Remove unneeded header file leds: lp8860: Add regulator enable during init leds: lp8860: Fix linuxdoc format for structure
| * leds: ledtrig-transient: Add SPDX license identifiersShuah Khan2018-01-111-20/+13Star
| | | | | | | | | | | | | | | | Replace GPL license statements with SPDX GPL-2.0 license identifiers and correct the module license to GPLv2. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-11-14 07:59:12 +0100