summaryrefslogtreecommitdiffstats
path: root/drivers/media/i2c
Commit message (Collapse)AuthorAgeFilesLines
* media: i2c: adv748x: Store the pixel rate ctrl on CSI objectsKieran Bingham2017-12-083-6/+9
| | | | | | | | | | | | | | | | The current implementation has to search the list of controls for the pixel rate control, each time it is set. This can be optimised easily by storing the ctrl pointer in the CSI/TX object, and referencing that directly. While at it, fix up a missing blank line also highlighted in review comments. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: v4l: mt9v032: Disable clock on error pathsAlexey Khoroshilov2017-12-081-6/+15
| | | | | | | | | | | | mt9v032_power_on() leaves clk enabled in case of errors, but it is not expected by its callers. There is a similar problem in mt9v032_registered(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: ov7670: add V4L2_CID_TEST_PATTERN controlAkinobu Mita2017-12-081-1/+45
| | | | | | | | | | The ov7670 has the test pattern generator features. This makes use of it through V4L2_CID_TEST_PATTERN control. Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: ov7670: use v4l2_async_unregister_subdev()Akinobu Mita2017-12-081-1/+1
| | | | | | | | | | | | The sub-device for ov7670 is registered by v4l2_async_register_subdev(). So it should be unregistered by v4l2_async_unregister_subdev() instead of v4l2_device_unregister_subdev(). Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: imx274: Fix error handling, add MAINTAINERS entrySakari Ailus2017-11-301-3/+2Star
| | | | | | | | Add the missing MAINTAINERS entry for imx274, fix error handling in driver probe and unregister the correct control handler in driver remove. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: et8ek8: select V4L2_FWNODEArnd Bergmann2017-11-301-0/+1
| | | | | | | | | | | | | | | | | | | v4l2_async_register_subdev_sensor_common() is only provided when CONFIG_V4L2_FWNODE is enabled, otherwise we get a link failure: drivers/media/i2c/et8ek8/et8ek8_driver.o: In function `et8ek8_probe': et8ek8_driver.c:(.text+0x884): undefined reference to `v4l2_async_register_subdev_sensor_common' This adds a Kconfig 'select' statement like all the other users of this interface have. Fixes: d8932f38c10f ("media: et8ek8: Add support for flash and lens devices") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: ov13858: Select V4L2_FWNODESakari Ailus2017-11-301-0/+1
| | | | | | | | | The ov13858 driver depends on the V4L2 fwnode, thus add that to Kconfig. Fixes: 5fcf092e0c9f ("[media] ov13858: add support for OV13858 sensor") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: drivers: remove "/**" from non-kernel-doc commentsMauro Carvalho Chehab2017-11-301-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Several comments are wrongly tagged as kernel-doc, causing those warnings: drivers/media/rc/st_rc.c:98: warning: No description found for parameter 'irq' drivers/media/rc/st_rc.c:98: warning: No description found for parameter 'data' drivers/media/pci/solo6x10/solo6x10-enc.c:183: warning: No description found for parameter 'solo_dev' drivers/media/pci/solo6x10/solo6x10-enc.c:183: warning: No description found for parameter 'ch' drivers/media/pci/solo6x10/solo6x10-enc.c:183: warning: No description found for parameter 'qp' drivers/media/usb/pwc/pwc-dec23.c:652: warning: Cannot understand * on line 652 - I thought it was a doc line drivers/media/usb/dvb-usb/cinergyT2-fe.c:40: warning: No description found for parameter 'op' drivers/media/usb/dvb-usb/friio-fe.c:301: warning: Cannot understand * (reg, val) commad list to initialize this module. on line 301 - I thought it was a doc line drivers/media/rc/streamzap.c:201: warning: No description found for parameter 'urb' drivers/media/rc/streamzap.c:333: warning: No description found for parameter 'intf' drivers/media/rc/streamzap.c:333: warning: No description found for parameter 'id' drivers/media/rc/streamzap.c:464: warning: No description found for parameter 'interface' drivers/media/i2c/ov5647.c:432: warning: Cannot understand * @short Subdev core operations registration on line 432 - I thought it was a doc line drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'd' drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'addr' drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'wbuf' drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'wlen' drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'rbuf' drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'rlen' drivers/media/platform/vim2m.c:350: warning: No description found for parameter 'priv' drivers/media/dvb-frontends/tua6100.c:34: warning: cannot understand function prototype: 'struct tua6100_priv ' drivers/media/platform/sti/hva/hva-h264.c:140: warning: cannot understand function prototype: 'struct hva_h264_stereo_video_sei ' drivers/media/platform/sti/hva/hva-h264.c:150: warning: Cannot understand * @frame_width: width in pixels of the buffer containing the input frame on line 150 - I thought it was a doc line drivers/media/platform/sti/hva/hva-h264.c:356: warning: Cannot understand * @ slice_size: slice size on line 356 - I thought it was a doc line drivers/media/platform/sti/hva/hva-h264.c:369: warning: Cannot understand * @ bitstream_size: bitstream size on line 369 - I thought it was a doc line drivers/media/platform/sti/hva/hva-h264.c:395: warning: Cannot understand * @seq_info: sequence information buffer on line 395 - I thought it was a doc line drivers/media/dvb-frontends/sp887x.c:137: warning: No description found for parameter 'fe' drivers/media/dvb-frontends/sp887x.c:137: warning: No description found for parameter 'fw' drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'n' drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'd' drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'quotient_i' drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'quotient_f' drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c:83: warning: cannot understand function prototype: 'struct ttusb ' drivers/media/platform/sh_veu.c:277: warning: No description found for parameter 'priv' drivers/media/dvb-frontends/zl10036.c:33: warning: cannot understand function prototype: 'int zl10036_debug; ' drivers/media/dvb-frontends/zl10036.c:179: warning: No description found for parameter 'state' drivers/media/dvb-frontends/zl10036.c:179: warning: No description found for parameter 'frequency' drivers/media/platform/rcar_fdp1.c:1139: warning: No description found for parameter 'priv' drivers/media/platform/ti-vpe/vpe.c:933: warning: No description found for parameter 'priv' drivers/media/usb/gspca/ov519.c:36: warning: No description found for parameter 'fmt' drivers/media/usb/dvb-usb/dib0700_devices.c:3367: warning: No description found for parameter 'adap' Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: lm3560: add a missing kernel-doc parameterMauro Carvalho Chehab2017-11-301-0/+1
| | | | | | | Fix this warning: drivers/media/i2c/lm3560.c:69: warning: No description found for parameter 'dev' Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: tvp514x: fix kernel-doc parametersMauro Carvalho Chehab2017-11-301-4/+8
| | | | | | | | | | | | | | | | | | There are some struct fields that aren't documented, and some consts whose comments start with /**, but they aren't kernel-doc annotations. So, fix it: drivers/media/i2c/tvp514x.c:127: warning: No description found for parameter 'hdl' drivers/media/i2c/tvp514x.c:127: warning: No description found for parameter 'pad' drivers/media/i2c/tvp514x.c:127: warning: No description found for parameter 'format' drivers/media/i2c/tvp514x.c:127: warning: No description found for parameter 'int_seq' drivers/media/i2c/tvp514x.c:219: warning: cannot understand function prototype: 'const struct v4l2_fmtdesc tvp514x_fmt_list[] = ' drivers/media/i2c/tvp514x.c:235: warning: cannot understand function prototype: 'const struct tvp514x_std_info tvp514x_std_list[] = ' drivers/media/i2c/tvp514x.c:941: warning: No description found for parameter 'fmt' drivers/media/i2c/tvp514x.c:941: warning: Excess function parameter 'format' description in 'tvp514x_set_pad_format' drivers/media/i2c/tvp514x.c:1208: warning: cannot understand function prototype: 'const struct i2c_device_id tvp514x_id[] = ' Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: s5k6aa: describe some function parametersMauro Carvalho Chehab2017-11-301-0/+5
| | | | | | | | | | | as warned: drivers/media/i2c/s5k6aa.c:429: warning: No description found for parameter 's5k6aa' drivers/media/i2c/s5k6aa.c:679: warning: No description found for parameter 's5k6aa' drivers/media/i2c/s5k6aa.c:733: warning: No description found for parameter 's5k6aa' drivers/media/i2c/s5k6aa.c:733: warning: No description found for parameter 'preset' drivers/media/i2c/s5k6aa.c:787: warning: No description found for parameter 'sd' Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: s5k6a3: document some fields at struct s5k6a3Mauro Carvalho Chehab2017-11-301-0/+3
| | | | | | | | drivers/media/i2c/s5k6a3.c:68: warning: No description found for parameter 'clock' drivers/media/i2c/s5k6a3.c:68: warning: No description found for parameter 'clock_frequency' drivers/media/i2c/s5k6a3.c:68: warning: No description found for parameter 'power_count' Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: m5mols: fix some kernel-doc markupsMauro Carvalho Chehab2017-11-303-2/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix those warnings: drivers/media/i2c/m5mols/m5mols_capture.c:42: warning: No description found for parameter 'sd' drivers/media/i2c/m5mols/m5mols_capture.c:42: warning: No description found for parameter 'addr_num' drivers/media/i2c/m5mols/m5mols_capture.c:42: warning: No description found for parameter 'addr_den' drivers/media/i2c/m5mols/m5mols_capture.c:42: warning: No description found for parameter 'val' drivers/media/i2c/m5mols/m5mols_capture.c:60: warning: No description found for parameter 'info' drivers/media/i2c/m5mols/m5mols_controls.c:134: warning: No description found for parameter 'info' drivers/media/i2c/m5mols/m5mols_core.c:124: warning: No description found for parameter 'data' drivers/media/i2c/m5mols/m5mols_core.c:124: warning: No description found for parameter 'length' drivers/media/i2c/m5mols/m5mols_core.c:124: warning: Excess function parameter 'size' description in 'm5mols_swap_byte' drivers/media/i2c/m5mols/m5mols_core.c:142: warning: No description found for parameter 'sd' drivers/media/i2c/m5mols/m5mols_core.c:241: warning: No description found for parameter 'sd' drivers/media/i2c/m5mols/m5mols_core.c:299: warning: No description found for parameter 'sd' drivers/media/i2c/m5mols/m5mols_core.c:324: warning: No description found for parameter 'sd' drivers/media/i2c/m5mols/m5mols_core.c:324: warning: No description found for parameter 'reg' drivers/media/i2c/m5mols/m5mols_core.c:357: warning: No description found for parameter 'sd' drivers/media/i2c/m5mols/m5mols_core.c:357: warning: No description found for parameter 'mode' drivers/media/i2c/m5mols/m5mols_core.c:374: warning: No description found for parameter 'info' drivers/media/i2c/m5mols/m5mols_core.c:429: warning: No description found for parameter 'sd' drivers/media/i2c/m5mols/m5mols_core.c:503: warning: No description found for parameter 'sd' drivers/media/i2c/m5mols/m5mols_core.c:671: warning: No description found for parameter 'info' drivers/media/i2c/m5mols/m5mols_core.c:694: warning: No description found for parameter 'info' drivers/media/i2c/m5mols/m5mols_core.c:798: warning: No description found for parameter 'sd' drivers/media/i2c/m5mols/m5mols_core.c:853: warning: No description found for parameter 'sd' drivers/media/i2c/m5mols/m5mols_core.c:853: warning: No description found for parameter 'on' Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* Merge tag 'media/v4.15-1' of ↵Linus Torvalds2017-11-1629-192/+2472
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - Documentation for digital TV (both kAPI and uAPI) are now in sync with the implementation (except for legacy/deprecated ioctls). This is a major step, as there were always a gap there - New sensor driver: imx274 - New cec driver: cec-gpio - New platform driver for rockship rga and tegra CEC - New RC driver: tango-ir - Several cleanups at atomisp driver - Core improvements for RC, CEC, V4L2 async probing support and DVB - Lots of drivers cleanup, fixes and improvements. * tag 'media/v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (332 commits) dvb_frontend: don't use-after-free the frontend struct media: dib0700: fix invalid dvb_detach argument media: v4l2-ctrls: Don't validate BITMASK twice media: s5p-mfc: fix lockdep warning media: dvb-core: always call invoke_release() in fe_free() media: usb: dvb-usb-v2: dvb_usb_core: remove redundant code in dvb_usb_fe_sleep media: au0828: make const array addr_list static media: cx88: make const arrays default_addr_list and pvr2000_addr_list static media: drxd: make const array fastIncrDecLUT static media: usb: fix spelling mistake: "synchronuously" -> "synchronously" media: ddbridge: fix build warnings media: av7110: avoid 2038 overflow in debug print media: Don't do DMA on stack for firmware upload in the AS102 driver media: v4l: async: fix unregister for implicitly registered sub-device notifiers media: v4l: async: fix return of unitialized variable ret media: imx274: fix missing return assignment from call to imx274_mode_regs media: camss-vfe: always initialize reg at vfe_set_xbar_cfg() media: atomisp: make function calls cleaner media: atomisp: get rid of storage_class.h media: atomisp: get rid of wrong stddef.h include ...
| * media: imx274: fix missing return assignment from call to imx274_mode_regsColin Ian King2017-11-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The variable ret is being checked for failure however it is not being set from the return status from the call to imx274_mode_regs. Currently ret is alwayus zero and the check is redundant. Fix this by assigning it. Detected by CoverityScan, CID#1460278 ("Logically dead code") Fixes: 0985dd306f72 ("media: imx274: V4l2 driver for Sony imx274 CMOS sensor") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
| * media: ov13858: Add support for flash and lens devicesSakari Ailus2017-10-311-1/+1
| | | | | | | | | | | | | | | | | | | | Parse async sub-devices related to the sensor by switching the async sub-device registration function. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
| * media: ov5670: Add support for flash and lens devicesSakari Ailus2017-10-311-1/+1
| | | | | | | | | | | | | | | | | | | | Parse async sub-devices related to the sensor by switching the async sub-device registration function. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
| * media: et8ek8: Add support for flash and lens devicesSakari Ailus2017-10-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | Parse async sub-devices related to the sensor by switching the async sub-device registration function. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
| * media: smiapp: Add support for flash and lens devicesSakari Ailus2017-10-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Parse async sub-devices related to the sensor by switching the async sub-device registration function. These types devices aren't directly related to the sensor, but are nevertheless handled by the smiapp driver due to the relationship of these component to the main part of the camera module --- the sensor. This does not yet address providing the user space with information on how to associate the sensor or lens devices but the kernel now has the necessary information to do that. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
| * media: ov9650: remove unnecessary terminated entry in menu items arrayAkinobu Mita2017-10-311-1/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The test_pattern_menu[] array has two valid items and a null terminated item. So the control's maximum value which is passed to v4l2_ctrl_new_std_menu_items() should be one. However, 'ARRAY_SIZE(test_pattern_menu) - 1' is actually passed and it's not correct. Fix it by removing unnecessary terminated entry and let the correct control's maximum value be passed to v4l2_ctrl_new_std_menu_items(). Cc: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
| * media: ov5640: don't clear V4L2_SUBDEV_FL_IS_I2CAkinobu Mita2017-10-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The v4l2_i2c_subdev_init() sets V4L2_SUBDEV_FL_IS_I2C flag in the subdev->flags. But this driver overwrites subdev->flags immediately after calling v4l2_i2c_subdev_init(). So V4L2_SUBDEV_FL_IS_I2C is not set after all. This stops breaking subdev->flags and preserves V4L2_SUBDEV_FL_IS_I2C. Side note: According to the comment in v4l2_device_unregister(), this is problematic only if the device is platform bus device. Device tree or ACPI based devices are not affected. Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
| * media: ov2640: don't clear V4L2_SUBDEV_FL_IS_I2CAkinobu Mita2017-10-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The v4l2_i2c_subdev_init() sets V4L2_SUBDEV_FL_IS_I2C flag in the subdev->flags. But this driver overwrites subdev->flags immediately after calling v4l2_i2c_subdev_init(). So V4L2_SUBDEV_FL_IS_I2C is not set after all. This stops breaking subdev->flags and preserves V4L2_SUBDEV_FL_IS_I2C. Side note: According to the comment in v4l2_device_unregister(), this is problematic only if the device is platform bus device. Device tree or ACPI based devices are not affected. Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
| * media: max2175: don't clear V4L2_SUBDEV_FL_IS_I2CAkinobu Mita2017-10-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The v4l2_i2c_subdev_init() sets V4L2_SUBDEV_FL_IS_I2C flag in the subdev->flags. But this driver overwrites subdev->flags immediately after calling v4l2_i2c_subdev_init(). So V4L2_SUBDEV_FL_IS_I2C is not set after all. This stops breaking subdev->flags and preserves V4L2_SUBDEV_FL_IS_I2C. Side note: According to the comment in v4l2_device_unregister(), this is problematic only if the device is platform bus device. Device tree or ACPI based devices are not affected. Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
| * media: adv7180: don't clear V4L2_SUBDEV_FL_IS_I2CAkinobu Mita2017-10-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The v4l2_i2c_subdev_init() sets V4L2_SUBDEV_FL_IS_I2C flag in the subdev->flags. But this driver overwrites subdev->flags immediately after calling v4l2_i2c_subdev_init(). So V4L2_SUBDEV_FL_IS_I2C is not set after all. This stops breaking subdev->flags and preserves V4L2_SUBDEV_FL_IS_I2C. Side note: According to the comment in v4l2_device_unregister(), this is problematic only if the device is platform bus device. Device tree or ACPI based devices are not affected. Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
| * media: tvaudio: Convert timers to use timer_setup()Kees Cook2017-10-311-5/+3Star
| | | | | | | | | | | | | | | | | | | | In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
| * media: tc358743: Convert timers to use timer_setup()Kees Cook2017-10-311-4/+3Star
| | | | | | | | | | | | | | | | | | | | | | In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Mats Randgaard <matrandg@cisco.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
| * media: tc358743: validate lane countPhilipp Zabel2017-10-271-0/+5
| | | | | | | | | | | | | | | | | | The TC358743 does not support more than 4 data lanes. Check that the lane count is valid. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
| * media: i2c: OV5647: change to use macro for the registersJacob Chen2017-10-271-16/+26
| | | | | | | | | | | | | | | | | | | | ref docuemnt: ov5647-datasheet-v1.00-2009 Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com> Reviewed-by: Luis Oliveira <lolivei@synopsys.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
| * media: i2c: OV5647: ensure clock lane in LP-11 state before streaming onJacob Chen2017-10-271-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When I was supporting Rpi Camera Module on the ASUS Tinker board, I found this driver have some issues with rockchip's mipi-csi driver. It didn't place clock lane in LP-11 state before performing D-PHY initialisation. >From our experience, on some OV sensors, LP-11 state is not achieved while BIT(5)-0x4800 is cleared. So let's set BIT(5) and BIT(0) both while not streaming, in order to coax the clock lane into LP-11 state. 0x4800 : MIPI CTRL 00 BIT(5) : clock lane gate enable 0: continuous 1: none-continuous BIT(0) : manually set clock lane 0: Not used 1: used Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com> Reviewed-by: Luis Oliveira <lolivei@synopsys.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
| * media: ov7670: Add the ov7670_s_power functionWenyou Yang2017-10-271-5/+26
| | | | | | | | | | | | | | | | | | | | | | Add the ov7670_s_power function which is responsible for manipulating the power dowm mode through the PWDN pin and the reset operation through the RESET pin, and keep it powered at all times. [sakari.ailus@linux.intel.com: set pwdn_gpio direction only once] Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
| * media: ov7670: Add the get_fmt callbackWenyou Yang2017-10-271-1/+76
| | | | | | | | | | | | | | | | | | Add the get_fmt callback, also enable V4L2_SUBDEV_FL_HAS_DEVNODE flag to make this subdev has device node. Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
| * media: ov7670: Add entity pads initializationWenyou Yang2017-10-271-1/+20
| | | | | | | | | | | | | | | | Add the media entity pads initialization. Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
| * media: imx274: V4l2 driver for Sony imx274 CMOS sensorLeon Luo2017-10-273-0/+1820
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The imx274 is a Sony CMOS image sensor that has 1/2.5 image size. It supports up to 3840x2160 (4K) 60fps, 1080p 120fps. The interface is 4-lane MIPI CSI-2 running at 1.44Gbps each. This driver has been tested on Xilinx ZCU102 platform with a Leopard LI-IMX274MIPI-FMC camera board. Support for the following features: -Resolutions: 3840x2160, 1920x1080, 1280x720 -Frame rate: 3840x2160 : 5 – 60fps 1920x1080 : 5 – 120fps 1280x720 : 5 – 120fps -Exposure time: 16 – (frame interval) micro-seconds -Gain: 1x - 180x -VFLIP: enable/disabledrivers/media/i2c/imx274.c -Test pattern: 12 test patterns Signed-off-by: Leon Luo <leonl@leopardimaging.com> Tested-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
| * media: tc358743: set entity function to video interface bridgePhilipp Zabel2017-10-271-0/+1
| | | | | | | | | | | | | | | | The TC358743 is an HDMI to MIPI CSI2-2 bridge. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
| * media: tc358743: remove an unneeded conditionDan Carpenter2017-10-271-1/+1
| | | | | | | | | | | | | | | | | | | | We can remove the check for if "state->cec_adap" is NULL. The cec_allocate_adapter() function never returns NULL and also we verified that "state->cec_adap" is an error pointer. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
| * media: i2c: tc358743: fix spelling mistakeJacob Chen2017-10-271-1/+1
| | | | | | | | | | | | | | | | It should be "LP-11". Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
| * media: smiapp: Rely on runtime PMSakari Ailus2017-10-243-65/+40Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of relying on a mix of runtime PM and the s_power() callback, drop the s_power() callback altogether and use runtime PM solely. As device access is required during device power-on and power-off sequences, runtime PM alone cannot tell whether the device is available. Thus the "active" field is introduced in struct smiapp_sensor to tell whether it is safe to write to the device. Consequently there is no need to power on the device whenever a file handle is open. This functionality is removed as well. The user may still control the device power management through sysfs. Autosuspend remains enabled, with 1 s delay. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
| * media: smiapp: Use __v4l2_ctrl_handler_setup()Sakari Ailus2017-10-241-8/+12
| | | | | | | | | | | | | | | | Use unlocked __v4l2_ctrl_handler_setup() in order to make the control setup atomic. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
| * [media] smiapp: Make clock control optionalSakari Ailus2017-10-041-1/+4
| | | | | | | | | | | | | | | | | | The clock control is not explicitly controlled by the driver in two cases: ACPI based systems and when the clock is part of the power sequence of the camera module. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
| * [media] smiapp: Get clock rate if it's not available through DTSakari Ailus2017-10-041-19/+33
| | | | | | | | | | | | | | | | | | | | | | | | Obtain the clock rate from the clock framework if it's not available through DT. The assumption is that the parent device (camera module) defines the rate as clock control is a part of the power on and power off sequences --- which are camera module specific. Also use the clock rate from DT if no clock is provided. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
| * [media] smiapp: Verify clock frequency after setting it, prevent changing itSakari Ailus2017-10-041-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | The external clock frequency was set by the driver but the obtained frequency was never verified. Do that. Being able to obtain the exact frequency is important as the value is used for PLL calculations which may result in frequencies that violate the PLL tree limits. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
| * [media] smiapp: Fix error handling in power on sequenceSakari Ailus2017-10-041-1/+1
| | | | | | | | | | | | | | | | The error handling code in smiapp_power_on() returned in case of a failed I2C write instead of cleaning up the mess. Fix this. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
| * [media] ov13858: Use do_div() for dividing a 64-bit numberSakari Ailus2017-10-041-4/+10
| | | | | | | | | | | | | | | | ov13858 contained a 64-bit division. Use do_div() for calculating it. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
| * [media] media: ov13858: Fix 4224x3136 video flickering at some vblanksChiranjeevi Rapolu2017-10-041-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously, with crop (0, 0), (4255, 3167), VTS < 0xC9E was resulting in blank frames sometimes. This appeared as video flickering. But we need VTS < 0xC9E to get ~30fps. Omni Vision recommends to use crop (0,8), (4255, 3159) for 4224x3136. With this crop, VTS 0xC8E is supported and yields ~30fps. Signed-off-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
| * [media] media: ov13858: Calculate pixel-rate at runtime, use modeChiranjeevi Rapolu2017-10-041-20/+29
| | | | | | | | | | | | | | | | | | | | | | Calculate pixel-rate at run time instead of compile time. Instead of using hardcoded pixels-per-line, extract it from current sensor mode. Signed-off-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
| * [media] ov2640: make array reset_seq static, reduces object code sizeColin Ian King2017-10-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Don't populate the array reset_seq on the stack, instead make it static. Makes the object code smaller by over 50 bytes: Before: text data bss dec hex filename 11737 6000 64 17801 4589 drivers/media/i2c/ov2640.o After: text data bss dec hex filename 11582 6096 64 17742 454e drivers/media/i2c/ov2640.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
| * [media] i2c: Improve a size determinationMarkus Elfring2017-10-043-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | Replace the specification of a data structure by pointer dereferences as the parameter for the operator "sizeof" to make size determination a bit safer according to the Linux coding style convention. This issue was detected by using the Coccinelle software. [mchehab@s-opensource.com: merged similar patches] Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
| * [media] i2c: Delete an error messages for failed memory allocationMarkus Elfring2017-10-044-15/+4Star
| | | | | | | | | | | | | | | | | | | | | | Omit extra messages for memory allocation failures. This issue was detected by using the Coccinelle software. [mchehab@s-opensource.com: merged similar patches] Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
| * [media] media: ov5670: Fix not streaming issue after resumeChiranjeevi Rapolu2017-10-041-4/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | Previously, the sensor was not streaming after resume from suspend, i.e. on S0->S3->S0 transition. Due to this, camera app preview appeared as stuck. Now, handle streaming state correctly in case of suspend-resume. Signed-off-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
| * [media] dw9714: Set the v4l2 focus ctrl step as 1Rajmohan Mani2017-10-041-1/+6
| | | | | | | | | | | | | | | | | | | | Current v4l2 focus ctrl step value of 16, limits the minimum granularity of focus positions to 16. Setting this value as 1, enables more accurate focus positions. Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-16 16:08:31 +0200