summaryrefslogtreecommitdiffstats
path: root/drivers/media/platform
Commit message (Collapse)AuthorAgeFilesLines
* media: platform: meson: Add Amlogic Meson G12A AO CEC Controller driverNeil Armstrong2019-04-223-0/+796
| | | | | | | | | | | | | | | | | | | | | | | | | | | The Amlogic G12A SoC embeds a second CEC controller with a totally different design. The two controller can work in the same time since the CEC line can be set to two different pins on the two controllers. This second CEC controller is documented as "AO-CEC-B", thus the registers will be named "CECB_" to differentiate with the other AO-CEC driver. Unlike the other AO-CEC controller, this one takes the Oscillator clock as input and embeds a dual-divider to provide a precise 32768Hz clock for communication. This is handled by registering a clock in the driver. Unlike the other AO-CEC controller, this controller supports setting up to 15 logical addresses and supports the signal_free_time settings in the transmit function. Unfortunately, this controller does not support "monitor" mode. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: cros-ec-cec: decrement HDMI device refcountHans Verkuil2019-04-221-0/+1
| | | | | | | | | | | The CrosEC CEC driver never decremented the HDMI device refcount. CEC drivers only need the HDMI device pointer as a key in the notifier list, it never accesses the device, so there is no need to keep a reference. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: seco-cec: decrement HDMI device refcountHans Verkuil2019-04-221-0/+1
| | | | | | | | | | The SECO CEC driver never decremented the HDMI device refcount. CEC drivers only need the HDMI device pointer as a key in the notifier list, it never accesses the device, so there is no need to keep a reference. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: tegra_cec: use new cec_notifier_parse_hdmi_phandle helperHans Verkuil2019-04-221-10/+4Star
| | | | | | | | | The Tegra CEC driver increased the HDMI device refcount when it shouldn't. Use the new helper function to ensure that that doesn't happen and to simplify the driver code. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: stih_cec: use new cec_notifier_parse_hdmi_phandle helperHans Verkuil2019-04-221-14/+7Star
| | | | | | | | | | The STI CEC driver increased the HDMI device refcount when it shouldn't. Use the new helper function to ensure that that doesn't happen and to simplify the driver code. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: s5p_cec: use new cec_notifier_parse_hdmi_phandle helperHans Verkuil2019-04-221-11/+5Star
| | | | | | | | | The S5P CEC driver increased the HDMI device refcount when it shouldn't. Use the new helper function to ensure that that doesn't happen and to simplify the driver code. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: meson: ao-cec: use new cec_notifier_parse_hdmi_phandle helperHans Verkuil2019-04-221-11/+5Star
| | | | | | | | | | The meson CEC driver increased the HDMI device refcount when it shouldn't. Use the new helper function to ensure that that doesn't happen and to simplify the driver code. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: seco-cec: fix building with RC_CORE=mArnd Bergmann2019-04-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | I previously added an RC_CORE dependency here, but missed the corner case of CONFIG_VIDEO_SECO_CEC=y with CONFIG_RC_CORE=m, which still causes a link error: drivers/media/platform/seco-cec/seco-cec.o: In function `secocec_probe': seco-cec.c:(.text+0x1b8): undefined reference to `devm_rc_allocate_device' seco-cec.c:(.text+0x2e8): undefined reference to `devm_rc_register_device' drivers/media/platform/seco-cec/seco-cec.o: In function `secocec_irq_handler': seco-cec.c:(.text+0xa2c): undefined reference to `rc_keydown' Refine the dependency to disallow building the RC subdriver in this case. This is the same logic we apply in other drivers like it. Fixes: f27dd0ad6885 ("media: seco-cec: fix RC_CORE dependency") Cc: <stable@vger.kernel.org> # 5.1 Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: rcar-csi2: Move setting of Field Detection Control RegisterNiklas Söderlund2019-04-221-2/+2
| | | | | | | | | | | | Later datasheet versions (rev 1.00) clarifies that the FLD register should be set after LINKCNT. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: rcar-csi2: Update start procedure for H3 ES2Niklas Söderlund2019-04-221-6/+29
| | | | | | | | | | | | Latest information from hardware engineers reveals that H3 ES2 and ES3 behave differently when working with link speeds bellow 250 Mpbs. Add a SoC match for H3 ES2.* and use the correct startup sequence. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: rcar-csi2: Update V3M and E3 start procedureNiklas Söderlund2019-04-221-5/+5
| | | | | | | | | | | The latest datasheet (rev 1.50) updates the start procedure for V3M and E3. Update the driver to match these changes. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: rcar-csi2: Use standby mode instead of resettingNiklas Söderlund2019-04-222-26/+42
| | | | | | | | | | | | | | | | Later versions of the datasheet updates the reset procedure to more closely resemble the standby mode. Update the driver to enter and exit the standby mode instead of resetting the hardware before and after streaming is started and stopped. This replaces the software reset (SRST.SRST) control. While at it break out the full start and stop procedures from rcsi2_s_stream() into the existing helper functions. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: coda: throw error on create_bufs with too small sizePhilipp Zabel2019-04-221-0/+3
| | | | | | | | | | If VIDIOC_CREATE_BUFS is called with a sizeimage smaller than the queue sizeimage, fail with -EINVAL instead of correcting the size and continuing without error. This is required by v4l2-compliance. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: coda: allow encoder to set colorimetry on the output queuePhilipp Zabel2019-04-221-5/+5
| | | | | | | | | | | v4l2-compliance sets colorimetry on the output queue and then verifies that querying colorimetry on the capture queue returns the same configuration. For this to work, the encoder must allow setting context colorimetry parameters on the output queue. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: coda: implement encoder frame size enumerationPhilipp Zabel2019-04-221-0/+37
| | | | | | | | | | The stateful encoder API requires VIDIOC_ENUM_FRAMESIZES to be implemented. Allow enumeration of supported frame sizes for encoding. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: coda: disable encoder command on decoder and vice versaPhilipp Zabel2019-04-221-8/+10
| | | | | | | | | Return -ENOTTY when userspace tries to call VIDIOC_(TRY_)ENCODER_CMD on a decoder instance or VIDIOC_(TRY_)DECODER_CMD on an encoder instance. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: coda: add min number of buffers controlsPhilipp Zabel2019-04-221-0/+6
| | | | | | | | | | Add min number of buffers for capture (decoder) and output (encoder) controls, which are required by the stateful video decoder / encoder interface specification. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: coda: clear error return value before picture runPhilipp Zabel2019-04-221-0/+3
| | | | | | | | | | | The error return value is not written by some firmware codecs, such as MPEG-2 decode on CodaHx4. Clear the error return value before starting the picture run to avoid misinterpreting unrelated values returned by sequence initialization as error return value. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: coda: remove mask from decoder h.264 level controlPhilipp Zabel2019-04-221-18/+4Star
| | | | | | | | | Since levels are specified in terms of maximum values, there is no reason to filter out lower levels than the supported maximum. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: coda: set codec earlierPhilipp Zabel2019-04-221-8/+20
| | | | | | | | | | The chosen codec depends on the coded format, which is known as soon as the S_FMT call on the coded queue. This allows to use the codec in callbacks that may be called before start_streaming, such as buf_queue. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: vivid: use vfree() instead of kfree() for dev->bitmap_capAlexander Potapenko2019-04-221-1/+1
| | | | | | | | | | | | | | syzkaller reported crashes on kfree() called from vivid_vid_cap_s_selection(). This looks like a simple typo, as dev->bitmap_cap is allocated with vzalloc() throughout the file. Fixes: ef834f7836ec0 ("[media] vivid: add the video capture and output parts") Signed-off-by: Alexander Potapenko <glider@google.com> Reported-by: Syzbot <syzbot+6c0effb5877f6b0344e2@syzkaller.appspotmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: mtk-vcodec: fix vp9 content playback error with show exist frameMaoguang Meng2019-04-221-9/+7Star
| | | | | | | | | | Update referenced frame buffer's reference count when playing vp9 content which has show_existing_frame flag, and copy enough buffer data to current shown frame. Signed-off-by: Maoguang Meng <maoguang.meng@mediatek.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: stm32-dcmi: fix crash when subdev do not expose any formatsHugues Fruchet2019-04-221-0/+6
| | | | | | | | | Do not access sd_formats[] if num_of_sd_formats is zero, ie subdev sensor didn't expose any formats. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: stm32-dcmi: do not emit error trace in case of few overrunHugues Fruchet2019-04-221-4/+8
| | | | | | | | Report overrun error only when it exceeds a given threshold. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: stm32-dcmi: fix error messagesHugues Fruchet2019-04-221-2/+3
| | | | | | | | Revisit and add some error messages. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: mtk-vcodec: enlarge struct vdec_pic_info fieldsYunfei Dong2019-04-225-40/+57
| | | | | | | | | Enlarge the plane number to support more complex case and add the support for fmt change case. Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: vimc: propagate pixel format in the streamHelen Fornazier2019-04-228-342/+304Star
| | | | | | | | | | | | | | | | | | Media bus codes were being mapped to pixelformats, which causes a limitation on vimc because not all pixelformats can be mapped to media bus codes. Also, media bus codes are an internal configuration from the device. Userspace only assures media bus codes matches between pads and expects the image in a given pixelformat. So we can allow almost any media bus format to be configured between pads, except for debayer that expects a media bus code of type bayer in the sink pad. [hverkuil-cisco@xs4all.nl: drop use of v4l2_get_fourcc_name: not yet available] [hverkuil-cisco@xs4all.nl: made vimc_mbus_list static] Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: platform: stm32: wait end of transmissionYannick Fertre2019-04-221-0/+11
| | | | | | | | | | | It is mandatory to write CEC_CFGR only when CECEN=0. To protect transmission, a check have been added to delayed logical address modification. This patch is necessary tp pass all tests of compliance. Signed-off-by: Yannick Fertré <yannick.fertre@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: atmel: atmel-isc: removed ARGB32 added ABGR32 and XBGR32Eugen Hristev2019-04-221-4/+10
| | | | | | | | | | | ISC will output the "ARGB32" configuration in byte order: B, G, R, Alpha. This is in fact the format BGRA, aka ABGR32. If alpha is missing, the same format is equivalent to XBGR32. Added both formats and removed ARGB32 which is wrong. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: atmel: atmel-isc: reworked driver and formatsEugen Hristev2019-04-221-417/+480
| | | | | | | | | | | | | | | | | | | | | | | | | | This change is a redesign in the formats and the way the ISC is configured w.r.t. sensor format and the output format from the ISC. I have changed the splitting between sensor output (which is also ISC input) and ISC output. The sensor format represents the way the sensor is configured, and what ISC is receiving. The format configuration represents the way ISC is interpreting the data and formatting the output to the subsystem. Now it's much easier to figure out what is the ISC configuration for input, and what is the configuration for output. The non-raw format can be obtained directly from sensor or it can be done inside the ISC. The controller format list will include a configuration for each format. The old supported formats are still in place, if we want to dump the sensor format directly to the output, the try format routine will detect and configure the pipeline accordingly. This also fixes the previous issues when the raw format was NULL which resulted in many crashes for sensors which did not have the expected/tested formats. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: replace strncpy() by strscpy()Mauro Carvalho Chehab2019-03-2915-25/+26
| | | | | | | | | | | The strncpy() function is being deprecated upstream. Replace it by the safer strscpy(). While here, replace a few occurences of strlcpy() that were recently added to also use strscpy(). Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: vim2m: Fix RGB 565 BE/LE supportMauro Carvalho Chehab2019-03-291-13/+17
| | | | | | | The support for those two formats are archtecture-dependent. Use the endianness to CPU macros to do it right. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: video-mux: fix null pointer dereferencesKangjie Lu2019-03-291-0/+5
| | | | | | | | | | devm_kcalloc may fail and return a null pointer. The fix returns -ENOMEM upon failures to avoid null pointer dereferences. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: mtk-vcodec: remove ready_to_displayAlexandre Courbot2019-03-292-7/+0Star
| | | | | | | | This member is never read throughout the code, so remove it. Signed-off-by: Alexandre Courbot <acourbot@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: mtk-vcodec: fix access to incorrect planes memberAlexandre Courbot2019-03-292-7/+7
| | | | | | | | | | | | | | | | | | | | Commit 0650a91499e0 ("media: mtk-vcodec: Correct return type for mem2mem buffer helpers") fixed the return types for mem2mem buffer helper functions by changing a few local variables from vb2_buffer to vb2_v4l2_buffer. However, it left a few accesses to vb2_buffer::planes as-is, accidentally turning them into accesses to vb2_v4l2_buffer::planes and resulting in values being read from/written to the wrong place. Fix this by inserting vb2_buf into these accesses so they mimic their original behavior. Fixes: 0650a91499e0 ("media: mtk-vcodec: Correct return type for mem2mem buffer helpers") Signed-off-by: Alexandre Courbot <acourbot@chromium.org> Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: davinci-isif: avoid uninitialized variable useArnd Bergmann2019-03-291-9/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | clang warns about a possible variable use that gcc never complained about: drivers/media/platform/davinci/isif.c:982:32: error: variable 'frame_size' is uninitialized when used here [-Werror,-Wuninitialized] dm365_vpss_set_pg_frame_size(frame_size); ^~~~~~~~~~ drivers/media/platform/davinci/isif.c:887:2: note: variable 'frame_size' is declared here struct vpss_pg_frame_size frame_size; ^ 1 error generated. There is no initialization for this variable at all, and there has never been one in the mainline kernel, so we really should not put that stack data into an mmio register. On the other hand, I suspect that gcc checks the condition more closely and notices that the global isif_cfg.bayer.config_params.test_pat_gen flag is initialized to zero and never written to from any code path, so anything depending on it can be eliminated. To shut up the clang warning, just remove the dead code manually, it has probably never been used because any attempt to do so would have resulted in undefined behavior. Fixes: 63e3ab142fa3 ("V4L/DVB: V4L - vpfe capture - source for ISIF driver on DM365") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: hfi_parser: don't trick gcc with a wrong expected sizeMauro Carvalho Chehab2019-03-251-2/+2
| | | | | | | | | | | | | | | | Smatch warns about small size on two structs: drivers/media/platform/qcom/venus/hfi_parser.c:103 parse_profile_level() error: memcpy() 'proflevel' too small (8 vs 128) drivers/media/platform/qcom/venus/hfi_parser.c: drivers/media/platform/qcom/venus/hfi_parser.c:129 parse_caps() error: memcpy() 'cap' too small (16 vs 512) The reason is that the hfi_parser actually expects: - multiple data entries on hfi_capabilities - multiple profile_level on hfi_profile_level_supported However, the structs trick gcc, making it to believe that there's just one value for each. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: rcar-dma: p_set can't be NULLMauro Carvalho Chehab2019-03-251-1/+1
| | | | | | | | | | | | | | | The only way for p_set to be NULL would be if vin_coef_set would be an empty array. On such case, the driver will OOPS, as it would try to de-reference a NULL value. So, the check if p_set is not NULL doesn't make any sense. Solves those two smatch warnings: drivers/media/platform/rcar-vin/rcar-dma.c:489 rvin_set_coeff() warn: variable dereferenced before check 'p_set' (see line 484) drivers/media/platform/rcar-vin/rcar-dma.c:494 rvin_set_coeff() error: we previously assumed 'p_set' could be null (see line 489) Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: sti/delta: remove uneeded checkMauro Carvalho Chehab2019-03-251-4/+2Star
| | | | | | | | | | | At the error logic, ipc_buf was already asigned to &ctx->ipc_buf_struct, with can't be null, as warned by smatch: drivers/media/platform/sti/delta/delta-ipc.c:223 delta_ipc_open() warn: variable dereferenced before check 'ctx->ipc_buf' (see line 183) So, remove the uneeded check. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: v4l: rcar_fdp1: Fix indentation odditiesLaurent Pinchart2019-03-251-14/+14
| | | | | | | | | Indentation is odd in several places, especially when printing messages to the kernel log. Fix it to match the usual coding style. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: vicodec: set pixelformat to V4L2_PIX_FMT_FWHT_STATELESS for stateless ↵Dafna Hirschfeld2019-03-251-12/+35
| | | | | | | | | | | | decoder for stateless decoder, set the output pixelformat to V4L2_PIX_FMT_FWHT_STATELESS and the pix info to pixfmt_stateless_fwht Signed-off-by: Dafna Hirschfeld <dafna3@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: vicodec: Add support for stateless decoder.Dafna Hirschfeld2019-03-252-24/+264
| | | | | | | | | Implement a stateless decoder for the new node. Signed-off-by: Dafna Hirschfeld <dafna3@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> [hverkuil-cisco@xs4all.nl: add 'return 0;' before default case in vicodec_try_ctrl()] Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: vicodec: Register another node for stateless decoderDafna Hirschfeld2019-03-251-4/+42
| | | | | | | | | | | Add stateless decoder instance field to the dev struct and register another node for the statelsess decoder. The stateless API for the node will be implemented in further patches. Signed-off-by: Dafna Hirschfeld <dafna3@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> [hverkuil-cisco@xs4all.nl: fix typo: videdev-stateless-dec -> stateless-decoder] Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: vicodec: Introducing stateless fwht defs and structsDafna Hirschfeld2019-03-251-28/+13Star
| | | | | | | | | | Add structs and definitions needed to implement stateless decoder for fwht and add I/P-frames QP controls to the public api. Signed-off-by: Dafna Hirschfeld <dafna3@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: vicodec: add struct for encoder/decoder instanceDafna Hirschfeld2019-03-251-102/+92Star
| | | | | | | | | Add struct 'vicodec_dev_instance' for the fields in vicodec_dev that have have both decoder and encoder versions. Signed-off-by: Dafna Hirschfeld <dafna3@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: vicodec: Handle the case that the reference buffer is NULLDafna Hirschfeld2019-03-252-4/+16
| | | | | | | | | | In the stateless decoder the reference buffer is null if the frame is an I-frame (flagged with FWHT_FL_I_FRAME). Make sure not to dereference it in that case. Signed-off-by: Dafna Hirschfeld <dafna3@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: vicodec: rename v4l2_fwht_default_fmt to v4l2_fwht_find_nth_fmtDafna Hirschfeld2019-03-253-8/+23
| | | | | | | | | | | | Rename 'v4l2_fwht_default_fmt' to 'v4l2_fwht_find_nth_fmt' and add a function 'v4l2_fwht_validate_fmt' to check if a format info matches the parameters. This function will also be used to validate the stateless params when adding support for stateless codecs. Signed-off-by: Dafna Hirschfeld <dafna3@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: vicodec: Validate version dependent header values in a separate functionDafna Hirschfeld2019-03-251-12/+19
| | | | | | | | | Move the code that validates version dependent header values to a separate function 'validate_by_version' Signed-off-by: Dafna Hirschfeld <dafna3@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: vicodec: keep the ref frame according to the format in decoderDafna Hirschfeld2019-03-255-268/+122Star
| | | | | | | | | | | | In the decoder, save the inner reference frame in the same format as the capture buffer. The decoder writes directly to the capture buffer and then the capture buffer is copied to the reference buffer. This will simplify the stateless decoder. Signed-off-by: Dafna Hirschfeld <dafna3@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: vicodec: add field 'buf' to fwht_raw_frameDafna Hirschfeld2019-03-252-2/+6
| | | | | | | | | | | Add the field 'buf' to fwht_raw_frame to indicate the start of the raw frame buffer. This field will be used to copy the capture buffer to the reference buffer in the next patch. Signed-off-by: Dafna Hirschfeld <dafna3@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-10 05:27:09 +0200