summaryrefslogtreecommitdiffstats
path: root/drivers/media/radio
Commit message (Collapse)AuthorAgeFilesLines
* media: radio: constify pnp_device_idArvind Yadav2017-08-203-3/+3
| | | | | | | | | | pnp_device_id are not supposed to change at runtime. All functions working with pnp_device_id provided by <linux/pnp.h> work with const pnp_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: radio: constify usb_device_idArvind Yadav2017-08-209-9/+9
| | | | | | | | | | usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: radio: constify pci_device_idArvind Yadav2017-08-091-1/+1
| | | | | | | | | | pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* Merge tag 'v4.13-rc1' into patchworkMauro Carvalho Chehab2017-07-171-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Linux v4.13-rc1 * tag 'v4.13-rc1': (11136 commits) Linux v4.13-rc1 random: reorder READ_ONCE() in get_random_uXX random: suppress spammy warnings about unseeded randomness replace incorrect strscpy use in FORTIFY_SOURCE kmod: throttle kmod thread limit kmod: add test driver to stress test the module loader MAINTAINERS: give kmod some maintainer love xtensa: use generic fb.h fault-inject: add /proc/<pid>/fail-nth fault-inject: simplify access check for fail-nth fault-inject: make fail-nth read/write interface symmetric fault-inject: parse as natural 1-based value for fail-nth write interface fault-inject: automatically detect the number base for fail-nth write interface kernel/watchdog.c: use better pr_fmt prefix MAINTAINERS: move the befs tree to kernel.org lib/atomic64_test.c: add a test that atomic64_inc_not_zero() returns an int mm: fix overflow check in expand_upwards() ubifs: Set double hash cookie also for RENAME_EXCHANGE ubifs: Massage assert in ubifs_xattr_set() wrt. init_xattrs ubifs: Don't leak kernel memory to the MTD ...
| * networking: make skb_put & friends return void pointersJohannes Berg2017-06-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions (skb_put, __skb_put and pskb_put) return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_put, __skb_put }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_put, __skb_put }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) which actually doesn't cover pskb_put since there are only three users overall. A handful of stragglers were converted manually, notably a macro in drivers/isdn/i4l/isdn_bsdcomp.c and, oddly enough, one of the many instances in net/bluetooth/hci_sock.c. In the former file, I also had to fix one whitespace problem spatch introduced. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * networking: introduce and use skb_put_data()Johannes Berg2017-06-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | media: radio: wl1273: add check on core->write() return valueGustavo A. R. Silva2017-06-241-2/+13
|/ | | | | | | | | | | | Check return value from call to core->write(), so in case of error print error message, jump to goto label fail and eventually return. Addresses-Coverity-ID: 1226943 Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* [media] wl128x: use setup_timerGeliang Tang2017-04-101-3/+2Star
| | | | | | | | Use setup_timer() instead of init_timer() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* [media] si4713: Add OF device ID tableJavier Martinez Canillas2017-03-221-0/+9
| | | | | | | | | | | | | | The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:<device>. But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* [media] media: radio-cadet, initialize timer with setup_timerMatej Hulín2017-02-031-6/+2Star
| | | | | | | | | | | Stop accessing timer struct members directly and use the setup_timer helper intended for that use. It makes the code cleaner and will allow for easier change of the timer struct internals. Signed-off-by: Matej Hulín <mito.hulin@gmail.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* [media] media: Drop FSF's postal address from the source code filesSakari Ailus2017-01-2730-122/+0Star
| | | | | | | | | | | | | | | | | | | | | Drop the FSF's postal address from the source code files that typically contain mostly the license text. Of the 628 removed instances, 578 are outdated. The patch has been created with the following command without manual edits: git grep -l "675 Mass Ave\|59 Temple Place\|51 Franklin St" -- \ drivers/media/ include/media|while read i; do i=$i perl -e ' open(F,"< $ENV{i}"); $a=join("", <F>); $a =~ s/[ \t]*\*\n.*You should.*\n.*along with.*\n.*(\n.*USA.*$)?\n//m && $a =~ s/(^.*)Or, (point your browser to) /$1To obtain the license, $2\n$1/m; close(F); open(F, "> $ENV{i}"); print F $a; close(F);'; done Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
* [media] wl128x: use KERNEL_CONT where neededMauro Carvalho Chehab2016-11-181-8/+8
| | | | | | | | | | Some continuation messages are not using KERNEL_CONT. Since commit 563873318d32 ("Merge branch 'printk-cleanups"), this won't work as expected anymore. So, let's add KERN_CONT to those lines. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* [media] radio: don't break long linesMauro Carvalho Chehab2016-10-212-8/+3Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Due to the 80-cols restrictions, and latter due to checkpatch warnings, several strings were broken into multiple lines. This is not considered a good practice anymore, as it makes harder to grep for strings at the source code. As we're right now fixing other drivers due to KERN_CONT, we need to be able to identify what printk strings don't end with a "\n". It is a way easier to detect those if we don't break long lines. So, join those continuation lines. The patch was generated via the script below, and manually adjusted if needed. </script> use Text::Tabs; while (<>) { if ($next ne "") { $c=$_; if ($c =~ /^\s+\"(.*)/) { $c2=$1; $next =~ s/\"\n$//; $n = expand($next); $funpos = index($n, '('); $pos = index($c2, '",'); if ($funpos && $pos > 0) { $s1 = substr $c2, 0, $pos + 2; $s2 = ' ' x ($funpos + 1) . substr $c2, $pos + 2; $s2 =~ s/^\s+//; $s2 = ' ' x ($funpos + 1) . $s2 if ($s2 ne ""); print unexpand("$next$s1\n"); print unexpand("$s2\n") if ($s2 ne ""); } else { print "$next$c2\n"; } $next=""; next; } else { print $next; } $next=""; } else { if (m/\"$/) { if (!m/\\n\"$/) { $next=$_; next; } } } print $_; } </script> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* [media] wl128x: don't break long linesMauro Carvalho Chehab2016-10-212-21/+17Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Due to the 80-cols restrictions, and latter due to checkpatch warnings, several strings were broken into multiple lines. This is not considered a good practice anymore, as it makes harder to grep for strings at the source code. As we're right now fixing other drivers due to KERN_CONT, we need to be able to identify what printk strings don't end with a "\n". It is a way easier to detect those if we don't break long lines. So, join those continuation lines. The patch was generated via the script below, and manually adjusted if needed. </script> use Text::Tabs; while (<>) { if ($next ne "") { $c=$_; if ($c =~ /^\s+\"(.*)/) { $c2=$1; $next =~ s/\"\n$//; $n = expand($next); $funpos = index($n, '('); $pos = index($c2, '",'); if ($funpos && $pos > 0) { $s1 = substr $c2, 0, $pos + 2; $s2 = ' ' x ($funpos + 1) . substr $c2, $pos + 2; $s2 =~ s/^\s+//; $s2 = ' ' x ($funpos + 1) . $s2 if ($s2 ne ""); print unexpand("$next$s1\n"); print unexpand("$s2\n") if ($s2 ne ""); } else { print "$next$c2\n"; } $next=""; next; } else { print $next; } $next=""; } else { if (m/\"$/) { if (!m/\\n\"$/) { $next=$_; next; } } } print $_; } </script> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* [media] si4713: don't break long linesMauro Carvalho Chehab2016-10-211-7/+6Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Due to the 80-cols restrictions, and latter due to checkpatch warnings, several strings were broken into multiple lines. This is not considered a good practice anymore, as it makes harder to grep for strings at the source code. As we're right now fixing other drivers due to KERN_CONT, we need to be able to identify what printk strings don't end with a "\n". It is a way easier to detect those if we don't break long lines. So, join those continuation lines. The patch was generated via the script below, and manually adjusted if needed. </script> use Text::Tabs; while (<>) { if ($next ne "") { $c=$_; if ($c =~ /^\s+\"(.*)/) { $c2=$1; $next =~ s/\"\n$//; $n = expand($next); $funpos = index($n, '('); $pos = index($c2, '",'); if ($funpos && $pos > 0) { $s1 = substr $c2, 0, $pos + 2; $s2 = ' ' x ($funpos + 1) . substr $c2, $pos + 2; $s2 =~ s/^\s+//; $s2 = ' ' x ($funpos + 1) . $s2 if ($s2 ne ""); print unexpand("$next$s1\n"); print unexpand("$s2\n") if ($s2 ne ""); } else { print "$next$c2\n"; } $next=""; next; } else { print $next; } $next=""; } else { if (m/\"$/) { if (!m/\\n\"$/) { $next=$_; next; } } } print $_; } </script> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* [media] si470x: don't break long linesMauro Carvalho Chehab2016-10-212-12/+10Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Due to the 80-cols restrictions, and latter due to checkpatch warnings, several strings were broken into multiple lines. This is not considered a good practice anymore, as it makes harder to grep for strings at the source code. As we're right now fixing other drivers due to KERN_CONT, we need to be able to identify what printk strings don't end with a "\n". It is a way easier to detect those if we don't break long lines. So, join those continuation lines. The patch was generated via the script below, and manually adjusted if needed. </script> use Text::Tabs; while (<>) { if ($next ne "") { $c=$_; if ($c =~ /^\s+\"(.*)/) { $c2=$1; $next =~ s/\"\n$//; $n = expand($next); $funpos = index($n, '('); $pos = index($c2, '",'); if ($funpos && $pos > 0) { $s1 = substr $c2, 0, $pos + 2; $s2 = ' ' x ($funpos + 1) . substr $c2, $pos + 2; $s2 =~ s/^\s+//; $s2 = ' ' x ($funpos + 1) . $s2 if ($s2 ne ""); print unexpand("$next$s1\n"); print unexpand("$s2\n") if ($s2 ne ""); } else { print "$next$c2\n"; } $next=""; next; } else { print $next; } $next=""; } else { if (m/\"$/) { if (!m/\\n\"$/) { $next=$_; next; } } } print $_; } </script> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* [media] constify i2c_algorithm structuresJulia Lawall2016-09-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These i2c_algorithm structures are only stored in the alg field of an i2c_adapter structure, which is declared as const. This declare the structures as const as well. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct i2c_algorithm i@p = { ... }; @ok@ identifier r.i; struct i2c_adapter e; position p; @@ e.alg = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct i2c_algorithm i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* [media] radio-si470x-i2c: Delete owner assignmentMarkus Elfring2016-09-061-1/+0Star
| | | | | | | | | | The field "owner" is set by core. Thus delete an extra initialisation. Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* [media] media: radio: si470x: radio-si470x-usb: don't print error when ↵Wolfram Sang2016-08-241-1/+0Star
| | | | | | | | | | allocating urb fails kmalloc will print enough information in case of failure. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2016-07-271-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking updates from David Miller: 1) Unified UDP encapsulation offload methods for drivers, from Alexander Duyck. 2) Make DSA binding more sane, from Andrew Lunn. 3) Support QCA9888 chips in ath10k, from Anilkumar Kolli. 4) Several workqueue usage cleanups, from Bhaktipriya Shridhar. 5) Add XDP (eXpress Data Path), essentially running BPF programs on RX packets as soon as the device sees them, with the option to mirror the packet on TX via the same interface. From Brenden Blanco and others. 6) Allow qdisc/class stats dumps to run lockless, from Eric Dumazet. 7) Add VLAN support to b53 and bcm_sf2, from Florian Fainelli. 8) Simplify netlink conntrack entry layout, from Florian Westphal. 9) Add ipv4 forwarding support to mlxsw spectrum driver, from Ido Schimmel, Yotam Gigi, and Jiri Pirko. 10) Add SKB array infrastructure and convert tun and macvtap over to it. From Michael S Tsirkin and Jason Wang. 11) Support qdisc packet injection in pktgen, from John Fastabend. 12) Add neighbour monitoring framework to TIPC, from Jon Paul Maloy. 13) Add NV congestion control support to TCP, from Lawrence Brakmo. 14) Add GSO support to SCTP, from Marcelo Ricardo Leitner. 15) Allow GRO and RPS to function on macsec devices, from Paolo Abeni. 16) Support MPLS over IPV4, from Simon Horman. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1622 commits) xgene: Fix build warning with ACPI disabled. be2net: perform temperature query in adapter regardless of its interface state l2tp: Correctly return -EBADF from pppol2tp_getname. net/mlx5_core/health: Remove deprecated create_singlethread_workqueue net: ipmr/ip6mr: update lastuse on entry change macsec: ensure rx_sa is set when validation is disabled tipc: dump monitor attributes tipc: add a function to get the bearer name tipc: get monitor threshold for the cluster tipc: make cluster size threshold for monitoring configurable tipc: introduce constants for tipc address validation net: neigh: disallow transition to NUD_STALE if lladdr is unchanged in neigh_update() MAINTAINERS: xgene: Add driver and documentation path Documentation: dtb: xgene: Add MDIO node dtb: xgene: Add MDIO node drivers: net: xgene: ethtool: Use phy_ethtool_gset and sset drivers: net: xgene: Use exported functions drivers: net: xgene: Enable MDIO driver drivers: net: xgene: Add backward compatibility drivers: net: phy: xgene: Add MDIO driver ...
| * drivers: misc: ti-st: Use int instead of fuzzy char for callback statusGeert Uytterhoeven2016-07-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On mips and parisc: drivers/bluetooth/btwilink.c: In function 'ti_st_open': drivers/bluetooth/btwilink.c:174:21: warning: overflow in implicit constant conversion [-Woverflow] hst->reg_status = -EINPROGRESS; drivers/nfc/nfcwilink.c: In function 'nfcwilink_open': drivers/nfc/nfcwilink.c:396:31: warning: overflow in implicit constant conversion [-Woverflow] drv->st_register_cb_status = -EINPROGRESS; There are actually two issues: 1. Whether "char" is signed or unsigned depends on the architecture. As the completion callback data is used to pass a (negative) error code, it should always be signed. 2. EINPROGRESS is 150 on mips, 245 on parisc. Hence -EINPROGRESS doesn't fit in a signed 8-bit number. Change the callback status from "char" to "int" to fix these. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* | [media] radio-maxiradio: fix memory leak when device is removedAlexey Khoroshilov2016-06-281-0/+1
| | | | | | | | | | | | | | | | | | | | | | Memory allocated for maxiradio device is not deallocated when the device is removed. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* | exynos4-is: remove some unused varsMauro Carvalho Chehab2016-06-241-1/+0Star
|/ | | | | | | | | | | | | | Gcc 6.1 warns about some unused vars and functions. Remove them: drivers/media/platform/exynos4-is/mipi-csis.c:665:46: warning: 's5pcsis_sd_internal_ops' defined but not used [-Wunused-const-variable=] static const struct v4l2_subdev_internal_ops s5pcsis_sd_internal_ops = { ^~~~~~~~~~~~~~~~~~~~~~~ drivers/media/platform/exynos4-is/mipi-csis.c:652:12: warning: 's5pcsis_open' defined but not used [-Wunused-function] static int s5pcsis_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) ^~~~~~~~~~~~ Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* [media] tea575x: convert to libraryAndy Shevchenko2016-02-101-19/+2Star
| | | | | | | | | | | | The module is used only as a library for now. Remove module init and exit routines to show this. While here, remove FSF snail address and attach EXPORT_SYMBOL() macros to corresponding functions. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] radio-si476x: add return value check to avoid dead codeFugang Duan2016-02-011-2/+2
| | | | | | | | | | | | | | | | | | Dead code found on below code: si476x_radio_add_new_custom(radio, SI476X_IDX_DIVERSITY_MODE); if (rval < 0) goto exit; si476x_radio_add_new_custom(radio, SI476X_IDX_INTERCHIP_LINK); if (rval < 0) ====> Dead code !!! goto exit; The piece of code miss return value check after calling .si476x_radio_add_new_custom(), the patch fix it. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] wl128x: fix typo in MODULE_PARM_DESCDan Carpenter2016-02-011-1/+1
| | | | | | | | | The module_param() is "default_rds_buf" and the MODULE_PARM_DESC() should match. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] media, sound: tea575x: constify snd_tea575x_ops structuresJulia Lawall2015-12-033-3/+3
| | | | | | | | | | | | The snd_tea575x_ops structures are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] radio-shark2: constify radio_tea5777_ops structuresJulia Lawall2015-11-172-2/+2
| | | | | | | | | | The radio_tea5777_ops structure is never modified, so declare it as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] include/media: move platform_data to linux/platform_data/mediaMauro Carvalho Chehab2015-11-173-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Let's not mix platform_data headers with the core headers. Instead, let's create a subdir at linux/platform_data and move the headers to that common place, adding it to MAINTAINERS. The headers were moved with: mkdir include/linux/platform_data/media/; git mv include/media/gpio-ir-recv.h include/media/ir-rx51.h include/media/mmp-camera.h include/media/omap1_camera.h include/media/omap4iss.h include/media/s5p_hdmi.h include/media/si4713.h include/media/sii9234.h include/media/smiapp.h include/media/soc_camera.h include/media/soc_camera_platform.h include/media/timb_radio.h include/media/timb_video.h include/linux/platform_data/media/ And the references fixed with this script: MAIN_DIR="linux/platform_data/" PREV_DIR="media/" DIRS="media/" echo "Checking affected files" >&2 for i in $DIRS; do for j in $(find include/$MAIN_DIR/$i -type f -name '*.h'); do n=`basename $j` git grep -l $n done done|sort|uniq >files && ( echo "Handling files..." >&2; echo "for i in \$(cat files|grep -v Documentation); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo "perl -ne 's,(include [\\\"\\<])$PREV_DIR($i)([\\\"\\>]),\1$MAIN_DIR$j\2\3,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done"; ); echo "Handling documentation..." >&2; echo "for i in MAINTAINERS \$(cat files); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo " perl -ne 's,include/$PREV_DIR($i)\b,include/$MAIN_DIR$j\1,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done" ); ) >script && . ./script Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
* [media] include/media: move driver interface headers to a separate dirMauro Carvalho Chehab2015-11-175-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Let's not mix headers used by the core with those headers that are needed by some driver-specific interface header. The headers used on drivers were manually moved using: mkdir include/media/drv-intf/ git mv include/media/cx2341x.h include/media/cx25840.h \ include/media/exynos-fimc.h include/media/msp3400.h \ include/media/s3c_camif.h include/media/saa7146.h \ include/media/saa7146_vv.h include/media/sh_mobile_ceu.h \ include/media/sh_mobile_csi2.h include/media/sh_vou.h \ include/media/si476x.h include/media/soc_mediabus.h \ include/media/tea575x.h include/media/drv-intf/ And the references for those headers were corrected using: MAIN_DIR="media/" PREV_DIR="media/" DIRS="drv-intf/" echo "Checking affected files" >&2 for i in $DIRS; do for j in $(find include/$MAIN_DIR/$i -type f -name '*.h'); do n=`basename $j` git grep -l $n done done|sort|uniq >files && ( echo "Handling files..." >&2; echo "for i in \$(cat files|grep -v Documentation); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo "perl -ne 's,(include [\\\"\\<])$PREV_DIR($i)([\\\"\\>]),\1$MAIN_DIR$j\2\3,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done"; ); echo "Handling documentation..." >&2; echo "for i in MAINTAINERS \$(cat files); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo " perl -ne 's,include/$PREV_DIR($i)\b,include/$MAIN_DIR$j\1,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done" ); ) >script && . ./script Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
* [media] radio: Drop owner assignment from i2c_driverKrzysztof Kozlowski2015-08-113-3/+0Star
| | | | | | | | i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] media/radio/saa7706h: Remove compat control opsRicardo Ribalda2015-07-061-14/+2Star
| | | | | | | | | | They are no longer used in old non-control-framework bridge drivers. Reported-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] wl128x: use swap() in fm_rdsparse_swapbytes()Fabian Frederick2015-07-061-4/+1Star
| | | | | | | | | | Use kernel.h macro definition. Thanks to Julia Lawall for Coccinelle scripting support. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] si470x: cleanup define namespaceMauro Carvalho Chehab2015-06-223-10/+10
| | | | | | | | | | | | Some architectures already use CHIPID defines: drivers/media/radio/si470x/radio-si470x.h:57:0: warning: "CHIPID" redefined [enabled by default] drivers/media/radio/si470x/radio-si470x.h:57:0: warning: "CHIPID" redefined [enabled by default] drivers/media/radio/si470x/radio-si470x.h:57:0: warning: "CHIPID" redefined [enabled by default] So, use SI_foo namespace to avoid conflicts. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] radio-si470x-i2c: Pass the IRQF_ONESHOT flagFabio Estevam2015-06-061-1/+2
| | | | | | | | | | | | | | | Since commit 1c6c69525b40 ("genirq: Reject bogus threaded irq requests") threaded IRQs without a primary handler need to be requested with IRQF_ONESHOT, otherwise the request will fail. So pass the IRQF_ONESHOT flag in this case. The semantic patch that makes this change is available in scripts/coccinelle/misc/irqf_oneshot.cocci. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] wl128x: Allow compile test of GPIO consumers if !GPIOLIBGeert Uytterhoeven2015-05-301-2/+2
| | | | | | | | | | | | | The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer functionality only, can still be compiled if GPIOLIB is not enabled. Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where appropriate. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] radio: fix error return codeJulia Lawall2015-05-011-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Return a negative error code on failure. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier ret; expression e1,e2; @@ ( if (\(ret < 0\|ret != 0\)) { ... return ret; } | ret = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] si4713: fix error return codeJulia Lawall2015-05-011-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Return a negative error code on failure. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier ret; expression e1,e2; @@ ( if (\(ret < 0\|ret != 0\)) { ... return ret; } | ret = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] wl128x: fix int type for streg_cbdataMauro Carvalho Chehab2015-04-301-1/+1
| | | | | | | | The streg_cbdata can have a negative error value. So, it should be an integer, and not u8, as reported by smatch: drivers/media/radio/wl128x/fmdrv_common.c:1517 fmc_prepare() warn: assigning (-115) to unsigned variable 'fmdev->streg_cbdata' Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] radio-si476x: Fix indentMauro Carvalho Chehab2015-04-301-2/+2
| | | | | | | As reported by smatch: drivers/media/radio/radio-si476x.c:571 si476x_radio_do_post_powerup_init() warn: inconsistent indenting Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] media: radio-si4713: improve usage of gpiod APIUwe Kleine-König2015-04-081-12/+6Star
| | | | | | | | | | | | | | Since 39b2bbe3d715 (gpio: add flags argument to gpiod_get*() functions) which appeared in v3.17-rc1, the gpiod_get* functions take an additional parameter that allows to specify direction and initial value for output. Simplify accordingly. Moreover use the _optional variant which has tighter error checking, but is simpler to use which allows further simplification. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] wl128x: embed video_deviceHans Verkuil2015-04-031-18/+10Star
| | | | | | | | Embed the video_device struct to simplify the error handling and in order to (eventually) get rid of video_device_alloc/release. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] wl128x-radio really depends on TI_STArnd Bergmann2015-04-021-1/+1
| | | | | | | | | | | | | | | | | | All other drivers using the TI_ST infrastructure use 'depends on' for this symbol, and it makes no sense to only enable that if CONFIG_NET is enable, because the radio driver also depends on CONFIG_NET itself: ERROR: "skb_queue_purge" [drivers/media/radio/wl128x/fm_drv.ko] undefined! ERROR: "skb_push" [drivers/media/radio/wl128x/fm_drv.ko] undefined! ERROR: "skb_pull" [drivers/media/radio/wl128x/fm_drv.ko] undefined! Making the driver dependency explicit solves randconfig build problems and makes it more obvious to the reader. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] media: radio: handle timeoutsNicholas Mc Guire2015-03-021-2/+7
| | | | | | | | Add handling for timeout case. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] media: radio: assign wait_for_completion_timeout to appropriately ↵Nicholas Mc Guire2015-03-021-8/+10
| | | | | | | | | | | | typed var wait_for_completion_timeout() returns unsigned long not int. This assigns the return value to an appropriately typed variable (also helps keep static code checkers happy). Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] si470x: fixup wait_for_completion_timeout return handlingNicholas Mc Guire2015-03-021-6/+8
| | | | | | | | | | return type of wait_for_completion_timeout is unsigned long not int. A appropriately named variable of type unsigned long is added and the assignments fixed up. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] radio/aimslab: use mdelay instead of udelayArnd Bergmann2015-02-021-2/+2
| | | | | | | | | | | | | | | Large udelay values are not allowed on the ARM architecture and result in a build error like ERROR: "__bad_udelay" [drivers/media/radio/radio-aimslab.ko] undefined! This changes the aimslab radio driver to use an equivalent mdelay statement. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] tea575x: split and export functionsOndrej Zary2015-01-271-9/+32
| | | | | | | | | Split ioctl interface from enum_freq_bands, g_tuner and s_hw_freq_seek functions and export them to be used in other drivers like bttv. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] media: radio: wl128x: fmdrv_rx.c: Remove unused functionRickard Strandqvist2015-01-272-17/+0Star
| | | | | | | | | | Remove the function fm_rx_get_rds_system() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds2014-12-154-4/+0Star
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-10 10:59:24 +0200