summaryrefslogtreecommitdiffstats
path: root/drivers/media/video/au0828
Commit message (Collapse)AuthorAgeFilesLines
...
* V4L/DVB (11343): au0828: make i2c clock speed per-board configurableDevin Heitmueller2009-04-073-20/+18Star
| | | | | | | | | | | Setup the i2c clock speed to be definable on a per-board basis. This allows us to explicitly set the clock speed to 30 KHz on the 950q, and also gets rid of code which sets it on a basis of what chip the i2c master is talking to at any given time (which could have caused issues because i2c slaves should never receive commands at a clock higher than their supported clock speed). Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11342): au0828: better document i2c registersDevin Heitmueller2009-04-072-28/+69
| | | | | | | | | Change the #define entries for the i2c registers to be more meaningful, and document the valid values for the registers. Note that this changeset makes *no* functional changes to the code. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11142): au0828: fix oops on ARM platform when allocating transfer ↵Devin Heitmueller2009-03-301-1/+1
| | | | | | | | | | | | | | | | | buffers Add missing URB_NO_TRANSFER_DMA_MAP flag, since the use of consistent memory is not permitted for DMA on the ARM platform. Thanks to Paul Thomas <pthomas8589@gmail.com> for providing sample ARM hardware that was experiencing the oops (tested on the at91rm9200 based LinuxStamp). Thanks to David Brownell <david-b@pacbell.net> for providing insight into the ARM memory architecture. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11127): Kconfig: replace all occurrences of CUSTOMIZE to CUSTOMISEMauro Carvalho Chehab2009-03-301-3/+3
| | | | | | | | | | | | | | There are several Kconfig items using CUSTOMIZE. Yet, most use the English writing CUSTOMISE. This generates lots of trouble, because people sometimes type the Kbuild item different. Let's standardise every occurrence using the same syntax. The changes were generated by this small shell script: for i in `find linux -type f`; do sed s,CUSTOMIZE,CUSTOMISE,g $i >/tmp/a && mv /tmp/a $i; done Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11110): au8522/au0828: Fix Kconfig dependenciesMauro Carvalho Chehab2009-03-301-1/+1
| | | | | | | | | | | | | | au8522 is now dependent of V4L2, as reported by Randy Dunlap <randy.dunlap@oracle.com>: au8522_decoder.c:(.text+0x199898): undefined reference to `v4l2_ctrl_query_fill' au8522_decoder.c:(.text+0x1998b3): undefined reference to `v4l2_ctrl_query_fill' au8522_decoder.c:(.text+0x199944): undefined reference to `v4l2_device_unregister_subdev' au8522_decoder.c:(.text+0x19997c): undefined reference to `v4l2_chip_ident_i2c_client' au8522_decoder.c:(.text+0x199f1e): undefined reference to `v4l2_i2c_subdev_init' Cc: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11109): au0828: Fix compilation when VIDEO_ADV_DEBUG = nMauro Carvalho Chehab2009-03-301-1/+3
| | | | | | | | | | | | | As reported by Kyle McMartin and Randy Dunlap: drivers/media/video/au0828/au0828-video.c:1438: error: 'const struct v4l2_subdev_core_ops' has no member named 'g_register' drivers/media/video/au0828/au0828-video.c:1453: error: 'const struct v4l2_subdev_core_ops' has no member named 's_register' This patch properly implements those two API ioctls only when debug is enabled. Cc: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11088): au0828: finish videodev/subdev conversionDevin Heitmueller2009-03-304-50/+16Star
| | | | | | | | | | | | Per Hans Verkuil <hverkuil@xs4all.nl> instruction, remove the deprecated attach_inform/detach_inform routines, and convert over the i2c calls to subdev calls. Thanks to Hans Verkuil <hverkuil@xs4all.nl> for providing feedback on the au0828 analog support. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11086): au0828: rename macro for currently non-function VBI supportDevin Heitmueller2009-03-301-8/+8
| | | | | | | | The VBI support or the au0828 has the framework written but it does not yet work. Rename the macro per Mauro's request. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11085): au0828/au8522: Codingstyle fixesDevin Heitmueller2009-03-304-115/+100Star
| | | | | | | | Take a pass over all of the au0828/au8522 files and cleanup all the codingstyle issues. This patch does not make *any* functional change to the code. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11084): au0828: add entry for undefined input typeDevin Heitmueller2009-03-301-0/+1
| | | | | | | | | | For the sake of completeness, include the "undefined" input type enumeration, even though there is no path that can actually call it. Thanks to Mauro Carvalho Chehab <mchehab@infradead.org> for pointing this out. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11083): au0828: remove some unneeded bracesDevin Heitmueller2009-03-301-7/+3Star
| | | | | | | | | | There were some braces left behind from when there was more code in the block. Remove it. Thanks to Mauro Carvalho Chehab <mchehab@infradead.org> for pointing this out. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11082): au0828: remove memset calls in v4l2 routines.Devin Heitmueller2009-03-301-7/+1Star
| | | | | | | | | | The userland callers are responsible for clearing the output buffers, so remove the unneeded memset calls. Thanks to Mauro Carvalho Chehab <mchehab@infradead.org> for pointing this out. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11081): au0828: make sure v4l2_device name is uniqueDevin Heitmueller2009-03-301-2/+5
| | | | | | | | | | Make sure newly created v4l2 devices have a unique name, modeling the logic after the cx18 driver. Thanks to Andy Walls <awalls@radix.net> for pointing out the issue. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11080): au0828: Convert to use v4l2_device/subdev frameworkDevin Heitmueller2009-03-305-8/+31
| | | | | | | | Convert over to using the new subdev framework for the au0828 bridge. This includes using the new i2c probing mechanism. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11079): au0828: fix panic on disconnect if analog initialization failedDevin Heitmueller2009-03-301-2/+3
| | | | | | | | | | | | | If the analog initialization failed to create the video device, we never actually add the entry to the au0828_devlist. Therefore a panic occurs when unregistering the analog subsystem. Make it so we only remove the entry from the list if we added it to the list in the first place. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11078): au0828: properly handle non-existent analog inputsDevin Heitmueller2009-03-303-4/+5
| | | | | | | | | | | | | | It is not valid to look for dev->board.input == NULL to detect an undefined analog configuration section, since it is a member of the struct and not a pointer (hence it will *always* be non-NULL). Do the check based on whether the first input is actually a valid input type instead. Thanks to Michael Krufky <mkrufky@linuxtv.org> for providing sample hardware of various configurations to test with. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11077): au0828: properly handle missing analog USB endpointDevin Heitmueller2009-03-303-30/+36
| | | | | | | | | | | | | | Move the setup of the analog isoc handler into au0828-video.c, so it does not occur if there is not an .input section defined for the board. Also fixes a case where if there is an input section but the board does not actually have analog support, the digital support will continue to work as expected. Thanks to Michael Krufky <mkrufky@linuxtv.org> for providing sample hardware of various configurations to test with. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11076): au0828: make g_chip_ident call work properlyDevin Heitmueller2009-03-301-0/+8
| | | | | | | | | | Make the g_chip_ident call work for the au0828/au8522. Discovered when testing with the v4l2_compliance tool Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> [mchehab@redhat.com: fix merge conflict, due to a path change for analog demod] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11075): au0828: make register debug lines easier to readDevin Heitmueller2009-03-301-2/+2
| | | | | | | | | Make it a little easier to read the debug messages for register read/write operations Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11074): au0828: fix i2c enumeration bugDevin Heitmueller2009-03-301-0/+18
| | | | | | | | | | | | | | | | | There was a bug where enumerating the i2c for devices would result in false positives. The root of the issue was the scanning was using SMBUS_QUICK messages, which are zero length write requests (which our i2c adapter implementation didn't handle). Because we never strobed any bytes onto the bus, the status register would still contain the value from the previous request. Thanks to Michael Krufky <mkrufky@linuxtv.org> and Steven Toth <stoth@linuxtv.org> for providing sample hardware, engineering level support, and testing. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11073): au0828: disable VBI code since it doesn't yet workDevin Heitmueller2009-03-301-5/+24
| | | | | | | | | Since the VBI support is not yet working for the au0828, don't advertise the capability or create the /dev/vbi device. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11072): au0828: advertise only NTSC-M (as opposed to all NTSC ↵Devin Heitmueller2009-03-301-2/+2
| | | | | | | | | | standards) We don't now how to make any variant of NTSC work other than NTSC-M, so don't advertise that we support the other variants. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11070): au0828: Rework the way the analog video binding occursDevin Heitmueller2009-03-305-35/+70
| | | | | | | | | | | | | | | Rework the way boards are managed so that we can change the board description based on the Hauppauge eeprom (modeled after cx88-cards.c). Also, make sure that we don't load the analog stack if there are no analog inputs defined in the board profile. Thanks to Michael Krufky <mkrufky@linuxtv.org> for providing information on the various ways different Hauppauge boards can be configured. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11068): au0828: add analog profile for the HVR-850Devin Heitmueller2009-03-301-0/+19
| | | | | | | | | | | | Add the analog parameters to the device profile for the HVR-850 Thanks to Michael Krufky <mkrufky@linuxtv.org> and Steven Toth <stoth@linuxtv.org> for providing sample hardware, engineering level support, and testing. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11067): au0828: workaround a bug in the au0828 i2c handlingDevin Heitmueller2009-03-301-2/+20
| | | | | | | | | | | | | | | | | | | There is an issue related to the i2c clock for addressing the xc5000. The au0828 chip does not support clock stretching, which the xc5000 makes use of. This results in cases where we silently get back garbage in i2c read operations. To work around this issue until we slow down the i2c clock when talking with that specific device. This was not an issue before we had analog support because we never needed to enumerate the i2c bus, and digital tuning never actually needed to perform read operations against the xc5000. Thanks to Michael Krufky <mkrufky@linuxtv.org> and Steven Toth <stoth@linuxtv.org> for providing sample hardware, engineering level support, and testing. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11066): au0828: add support for analog functionality in bridgeDevin Heitmueller2009-03-306-13/+1920
| | | | | | | | | | | | | Add support for the analog functionality found in the au0828 bridge Thanks to Michael Krufky <mkrufky@linuxtv.org> and Steven Toth <stoth@linuxtv.org> for providing sample hardware, engineering level support, and testing. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> [mchehab@redhat.com: fix compilation by adding linux/version.h] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (10897): Fix Kbuild MEDIA_TUNER_CUSTOMIZE dependenciesMauro Carvalho Chehab2009-03-301-3/+3
| | | | Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (10838): get rid of the other occurrences of DVB_FE_CUSTOMIZE typoMauro Carvalho Chehab2009-03-301-3/+3
| | | | | | | There are still more places where DVB_FE_CUSTOMIZE is used, instead of DVB_FE_CUSTOMISE. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (10836): Kconfig: replace DVB_FE_CUSTOMIZE to DVB_FE_CUSTOMISEMauro Carvalho Chehab2009-03-301-1/+1
| | | | | | | The name of the option is DVB_FE_CUSTOMISE. However, on a few places, a wrong name were used, due to a typo (DVB_FE_CUSTOMIZE). Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9252): au0828: Checkpatch complianceSteven Toth2008-10-173-3/+5
| | | | | | | au0828: Checkpatch compliance Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9247): au0828: add support for another USB id for Hauppauge HVR950QMichael Krufky2008-10-171-0/+3
| | | | | | | Add autodetection support for a new revision of the Hauppauge HVR950Q (2040:721e) Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9149): hvr950q: led feedback based on snrMichael Krufky2008-10-131-1/+38
| | | | | Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9049): convert tuner drivers to use dvb_frontend->callbackMichael Krufky2008-10-123-3/+5
| | | | | Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (8951): xc5000: dont pass devptr in xc5000_attach()Michael Krufky2008-10-121-3/+2Star
| | | | | | | | | | | | Dont pass devptr in xc5000_attach, dont store it in xc5000_priv. This pointer is passed into the tuner_callback function, which always expects a pointer to fe->dvb->priv or i2c_adapter->algo_data. This prevents future possible bugs in new drivers, such as using a "devptr" other that the standard fe->dvb->priv in a DVB driver. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (8805): Steven Toth email address changeSteven Toth2008-09-037-8/+8
| | | | | | | | I need this so I can better isolate my linux email from my corporate email. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (8600): au0828: explicitly set 6 MHz IF frequency in ↵Michael Krufky2008-09-031-0/+2
| | | | | | | | | | | | | hauppauge_hvr950q_config Explicitly set 6 MHz IF frequency for VSB and QAM in hauppauge_hvr950q_config. The default value is 6 MHz, so this patch doesn't change anything -- this only improves code readability and may prevent future bugs. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8556): au0828: add support for Hauppauge WoodburyMichael Krufky2008-09-034-0/+30
| | | | | Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8530): au0828: add support for new revision of HVR950QMichael Krufky2008-07-274-0/+29
| | | | | Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8043): au0828: add support for additional USB device id'sMichael Krufky2008-06-261-0/+18
| | | | | Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (7919): VIDEO_AU0828 does not depend on VIDEO_DEVMichael Krufky2008-06-051-1/+1
| | | | | Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (7918): au0828: remove irrelevent analog tuner standby codeMichael Krufky2008-06-051-6/+0Star
| | | | | | | | | | | | This code is irrelevant to this driver and should be removed. This was copied from a hack in cx88-dvb.c, which prevents noise coming from the analog tuner (via an audio patch cable from the pci card to the sound hardware) when in digital mode by muting the tda988x. This issue does not apply to this USB hybrid chip design, where a single piece of silicon handles both analog and digital demodulation. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (7893): xc5000: bug-fix: allow multiple devices in a single systemMichael Krufky2008-05-141-4/+2Star
| | | | | | | | | | | | | | | | | | The current code passes a context pointer in the xc5000_config struct. This context pointer is used in the tuner_callback function, used to reset the device after firmware download. The xc5000_config struct is a static structure, whose .priv member was being assigned before calling xc5000_attach(). If there are more than one of the same device type installed on a single system, the last one to assign xc5000_config.priv will "win", and all others will cease to function properly. This patch passes the context pointer in xc5000_attach() rather that storing it within the static struct xc5000_config. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (7835): multimedia/video: fix au0828 KconfigRandy Dunlap2008-05-141-1/+1
| | | | | | | | Fix undefined references in au0828: depends on USB and select VIDEO_TVEEPROM Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (7834): build fix for drivers/media/video/au0828Ingo Molnar2008-05-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | x86.git testing found the following build failure in v2.6.26-rc1: MODPOST 424 modules ERROR: "tveeprom_hauppauge_analog" [drivers/media/video/au0828/au0828.ko] undefined! ERROR: "tveeprom_read" [drivers/media/video/au0828/au0828.ko] undefined! with this config: http://redhat.com/~mingo/misc/config-Sat_May__3_22_28_58_CEST_2008.bad this patch does what other video drivers do to utilize the VIDEO_TVEEPROM functionality (and this resolves the build problem) - but i have not checked it on real hardware and i have not checked whether the fix is complete. selections, so some items might still be missing - just not triggered with this specific config. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* Rename common tuner Kconfig names to use the sameMauro Carvalho Chehab2008-04-291-1/+1
| | | | namespace for all of them.
* V4L/DVB(7767): Move tuners to common/tunersMauro Carvalho Chehab2008-04-291-1/+1
| | | | | | | | | There were several issues in the past, caused by the hybrid tuner design, since now, the same tuner can be used by drivers/media/dvb and drivers/media/video. Kconfig items were rearranged, to split V4L/DVB core from their drivers. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* media: fix integer as NULL pointer warningsHarvey Harrison2008-04-291-1/+1
| | | | | | | | | | | | | | | | | | | drivers/media/video/v4l2-common.c:719:16: warning: Using plain integer as NULL pointer drivers/media/video/au0828/au0828-dvb.c:122:19: warning: Using plain integer as NULL pointer drivers/media/video/ivtv/ivtv-yuv.c:1101:22: warning: Using plain integer as NULL pointer drivers/media/video/ivtv/ivtv-yuv.c:1102:23: warning: Using plain integer as NULL pointer drivers/media/video/pvrusb2/pvrusb2-audio.c:78:39: warning: Using plain integer as NULL pointer drivers/media/video/pvrusb2/pvrusb2-video-v4l.c:84:39: warning: Using plain integer as NULL pointer drivers/media/video/pvrusb2/pvrusb2-v4l2.c:1264:9: warning: Using plain integer as NULL pointer drivers/media/video/pvrusb2/pvrusb2-context.c:197:28: warning: Using plain integer as NULL pointer drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c:126:39: warning: Using plain integer as NULL pointer drivers/media/video/pvrusb2/pvrusb2-dvb.c:133:32: warning: Using plain integer as NULL pointer drivers/media/video/pvrusb2/pvrusb2-dvb.c:145:31: warning: Using plain integer as NULL pointer drivers/media/video/pvrusb2/pvrusb2-dvb.c:177:55: warning: Using plain integer as NULL pointer drivers/media/video/videobuf-core.c:100:9: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* V4L/DVB (7750): au0828/ cleanups and fixesAdrian Bunk2008-04-265-33/+10Star
| | | | | | | | | | | | | | | | This patch contains the following cleanups and fixes: - "debug" is definitely not a good name for a global variable, renamed it to "au0828_debug" this fixes a compile error with some kernel configurations - since the module parameter is int the variable shouldn't be unsigned - remove the {usb,bridge,i2c}_debug module parameters since they are already covered by the "debug" module parameter - remove the unused au0828_bcount - make the needlessly global i2c_scan static - make the needlessly global dvb_register() static Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (7735): Fix compilation for au0828Brandon Philips2008-04-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Encountered this error when testing. Kernel: arch/x86/boot/bzImage is ready (#76) MODPOST 813 modules ERROR: "dvb_dmx_init" [drivers/media/video/au0828/au0828.ko] undefined! ERROR: "dvb_unregister_adapter" [drivers/media/video/au0828/au0828.ko] undefined! ERROR: "dvb_register_frontend" [drivers/media/video/au0828/au0828.ko] undefined! ERROR: "dvb_unregister_frontend" [drivers/media/video/au0828/au0828.ko] undefined! ERROR: "dvb_net_release" [drivers/media/video/au0828/au0828.ko] undefined! ERROR: "dvb_frontend_detach" [drivers/media/video/au0828/au0828.ko] undefined! ERROR: "dvb_dmxdev_release" [drivers/media/video/au0828/au0828.ko] undefined! ERROR: "dvb_net_init" [drivers/media/video/au0828/au0828.ko] undefined! ERROR: "dvb_dmx_release" [drivers/media/video/au0828/au0828.ko] undefined! ERROR: "dvb_dmx_swfilter_packets" [drivers/media/video/au0828/au0828.ko] undefined! ERROR: "dvb_register_adapter" [drivers/media/video/au0828/au0828.ko] undefined! ERROR: "dvb_dmxdev_init" [drivers/media/video/au0828/au0828.ko] undefined! WARNING: modpost: Found 9 section mismatch(es). To see full details build your kernel with: 'make CONFIG_DEBUG_SECTION_MISMATCH=y' make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 Signed-off-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (7638): CodingStyle fixes for au8522 and au0828Mauro Carvalho Chehab2008-04-245-33/+32Star
| | | | Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-09-16 05:33:46 +0200