summaryrefslogtreecommitdiffstats
path: root/drivers/mfd/Kconfig
Commit message (Collapse)AuthorAgeFilesLines
* mfd: intel_soc_pmic: Differentiate between Bay and Cherry Trail CRC variantsHans de Goede2017-09-051-2/+2
| | | | | | | | | | | | | | | | | | | | | Both Bay and Cherry Trail devices may be used together with a Crystal Cove PMIC. Each platform has its own variant of the PMIC, which both use the same ACPI HID, but they are not 100% compatible. This commits makes the intel_soc_pmic_core code check the _HRV of the ACPI-firmware-node and selects intel_soc_pmic_config_byt_crc resp. intel_soc_pmic_config_cht_crc based on this. This fixes the Bay Trail specific ACPI OpRegion code causing problems on Cherry Trail devices. Specifically this was causing the external microsd slot on a Dell Venue 8 5855 (Cherry Trail version) to not work and the eMMC to become unreliable and throw lots of errors. Fixes: 5165238460 ("mfd: intel_soc_pmic: Core driver") Reported-and-tested-by: russianneuromancer <russianneuromancer@ya.ru> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* mfd: intel_soc_pmic_chtwc: Turn Kconfig option into a boolHans de Goede2017-09-051-1/+1
| | | | | | | | | | | | The PMIC provides ACPI OpRegions which must be available for other drivers' PS0 / PS3 methods early-on as such it must be builtin as the Kconfig help text already states. Somehow its Kconfig option ended up being a tristate though, this fixes this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* mfd: Add support for TPS68470 deviceRajmohan Mani2017-09-051-0/+18
| | | | | | | | | | | | | The TPS68470 device is an advanced power management unit that powers a Compact Camera Module (CCM), generates clocks for image sensors, drives a dual LED for Flash and incorporates two LED drivers for general purpose indicators. This patch adds support for TPS68470 mfd device. Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* mfd: Add ROHM BD9571MWV-M MFD PMIC driverMarek Vasut2017-09-051-0/+14
| | | | | | | | | Add the MFD part of the ROHM BD9571MWV-M PMIC driver and MAINTAINERS entry. The MFD part only specifies the regmap bits for the PMIC and binds the subdevs together. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* mfd: Kconfig: Add missing Kconfig dependency for TPS65086Michal Simek2017-09-051-0/+1
| | | | | | | | | | | | | | | | | | MTF_CORE should be enabled when driver is enabled. Without this patch you can configure: CONFIG_MFD_CORE is not set CONFIG_MFD_TPS65086=y ... which ends up with compilation error: drivers/mfd/tps65086.o: In function `tps65086_probe': drivers/mfd/tps65086.c:110: undefined reference to `mfd_add_devices' drivers/mfd/tps65086.c:110:(.text+0x128): relocation truncated to fit: \ R_AARCH64_CALL26 against undefined symbol `mfd_add_devices' Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
*-. Merge branches 'ib-mfd-arm-i2c-4.14', 'ib-mfd-arm-usb-video-4.14', ↵Lee Jones2017-09-051-2/+16
|\ \ | | | | | | | | | 'ib-mfd-hwmon-4.14', 'ib-mfd-iio-pwm-4.14', 'ib-mfd-input-rtc-4.14', 'ib-mfd-many-4.14' and 'ib-mfd-pinctrl-regulator-4.14' into ibs-for-mfd-merged
| | * mfd: rk808: Add RK805 supportElaine Zhang2017-08-211-2/+2
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The RK805 chip is a Power Management IC (PMIC) for multimedia and handheld devices. It contains the following components: - Regulators - RTC - Clocking Both RK808 and RK805 chips are using a similar register map, so we can reuse the RTC and Clocking functionality. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Joseph Chen <chenjh@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| * mfd: Add STM32 LPTimer driverFabrice Gasnier2017-09-041-0/+14
|/ | | | | | | | | | | | STM32 Low-Power Timer hardware block can be used for: - PWM generation - IIO trigger (in sync with PWM) - IIO quadrature encoder counter PWM and IIO timer configuration are mixed in the same registers so we need a multi fonction driver to be able to share those registers. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* mfd: Add LP87565 PMIC supportKeerthy2017-07-061-0/+14
| | | | | | | | | | | | | | | | The LP87565 chip is a power management IC for Portable Navigation Systems and Tablet Computing devices. It contains the following components: - Configurable Bucks(Single and multi-phase). - Configurable General Purpose Output Signals (GPO). The LP87565-Q1 variant device uses two 2-phase outputs configuration, Buck0 is master for Buck0/1 output and Buck2 is master for Buck2/3 output. Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* mfd: axp20x-i2c: Document that this must be builtin on x86Hans de Goede2017-07-061-0/+5
| | | | | | | | | | | | | | | | | | | | | | | On x86 the AXP288 PMIC provides an ACPI OpRegion handler, which must be available before other drivers using it are loaded, which can only be ensured if the MFD, OpRegion and i2c-bus drivers are built-in. Since the AXP20x MFD code is used on non x86 too we cannot simply change this into a bool, I've tried some Kconfig magic with if x86 but I could not get this working correctly, so this commit just documents that this should be built-in on x86, which fixes errors like these during boot: mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA ACPI Error: No handler for Region [REGS] (ffff93543b0cc3a8) [UserDefinedRegion] ACPI Error: Region UserDefinedRegion (ID=143) has no handler (20170119/exfldio-2 ACPI Error: Method parse/execution failed [\_SB.PCI0.I2C7.PMI5.GET] (Node ffff93 ACPI Error: Method parse/execution failed [\_SB.PCI0.SHC1._PS0] (Node ffff93543b acpi 80860F14:02: Failed to change power state to D0 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Tested-by: russianneuromancer <russianneuromancer@ya.ru> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* mfd: Add Cherry Trail Whiskey Cove PMIC driverHans de Goede2017-07-061-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add mfd driver for Intel CHT Whiskey Cove PMIC, based on various non upstreamed CHT Whiskey Cove PMIC patches. This is a somewhat minimal version which adds irqchip support and cells for: ACPI PMIC opregion support, the i2c-controller driving the external charger irc and the pwrsrc/extcon block. Further cells can be added in the future if/when drivers are upstreamed for them. [The above patch caused a build error on some archetectures] From: Arnd Bergmann <arnd@arndb.de> I ran into a build error on ARM with a platform that has a non-standard clk implementation: drivers/clk/clk.o: In function `clk_disable': clk.c:(.text.clk_disable+0x0): multiple definition of `clk_disable' arch/arm/mach-omap1/clock.o:clock.c:(.text.clk_disable+0x0): first defined here drivers/clk/clk.o: In function `clk_enable': clk.c:(.text.clk_enable+0x0): multiple definition of `clk_enable' arch/arm/mach-omap1/clock.o:clock.c:(.text.clk_enable+0x0): first defined here The problem is a device driver that uses 'select COMMON_CLK', which is generally a bad idea: selecting a subsystem should only be done from a platform, otherwise we run into circular dependencies. The same driver also selects 'GPIOLIB' and 'I2C', which has a similar effect. This turns all three into 'depends on', as it should be. Finally, we can limit the build to x86, unless we are compile testing. First patch: Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Fix for first patch (squashed): Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* mfd: intel_soc_pmic: Select designware i2c-bus driverHans de Goede2017-07-061-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Crystal Cove PMIC provides an ACPI OPRegion handler, which must be available before other drivers using it are loaded, which is why INTEL_SOC_PMIC is a bool. Just having the driver is not enough, the driver for the i2c-bus must also be built in, to ensure this, this patch adds a select for it. This fixes errors like these during boot: mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA ACPI Error: No handler for Region [REGS] (ffff93543b0cc3a8) [UserDefinedRegion] (20170119/evregion-166) ACPI Error: Region UserDefinedRegion (ID=143) has no handler (20170119/exfldio-299) ACPI Error: Method parse/execution failed [\_SB.PCI0.I2C7.PMI5.GET] (Node ffff93543b0cde10), AE_NOT_EXIST (20170119/psparse-543) ACPI Error: Method parse/execution failed [\_SB.PCI0.SHC1._PS0] (Node ffff93543b0b5cd0), AE_NOT_EXIST (20170119/psparse-543) acpi 80860F14:02: Failed to change power state to D0 While at it this patch also changes the human readable name of the Kconfig option to make clear the INTEL_SOC_PMIC option selects support for the Intel Crystal Cove PMIC and documents why this is a bool. [The above patch caused a build error on some archetectures] From: Arnd Bergmann <arnd@arndb.de> I ran into a build error on ARM with a platform that has a non-standard clk implementation: drivers/clk/clk.o: In function `clk_disable': clk.c:(.text.clk_disable+0x0): multiple definition of `clk_disable' arch/arm/mach-omap1/clock.o:clock.c:(.text.clk_disable+0x0): first defined here drivers/clk/clk.o: In function `clk_enable': clk.c:(.text.clk_enable+0x0): multiple definition of `clk_enable' arch/arm/mach-omap1/clock.o:clock.c:(.text.clk_enable+0x0): first defined here The problem is a device driver that uses 'select COMMON_CLK', which is generally a bad idea: selecting a subsystem should only be done from a platform, otherwise we run into circular dependencies. The same driver also selects 'GPIOLIB' and 'I2C', which has a similar effect. This turns all three into 'depends on', as it should be. Finally, we can limit the build to x86, unless we are compile testing. First patch: Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Fix for first patch (squashed): Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* mfd: intel_soc_pmic: Fix a mess with compilation unitsAndy Shevchenko2017-04-271-2/+13
| | | | | | | | | | | | | | | | | | | | Crystal Cove and Whiskey Cove are two different PMICs which are installed on Intel Atom SoC based platforms. Moreover there are two independent drivers that by some reason were supposed (*) to get into one kernel module. Fix the mess by clarifying Kconfig option for Crystal Cove and split Whiskey Cove out of it. (*) It looks like the configuration was never tested with INTEL_SOC_PMIC=n. The line in Makefile is actually wrong. Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> (supporter:ACPI) Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* mfd: Add support for DA9061Steve Twiss2017-04-271-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | MFD support for DA9061 is provided as part of the DA9062 device driver. The registers header file adds two new chip variant IDs defined in DA9061 and DA9062 hardware. The core header file adds new software enumerations for listing the valid DA9061 IRQs and a da9062_compatible_types enumeration for distinguishing between DA9061/62 devices in software. The core source code adds a new .compatible of_device_id entry. This is extended from DA9062 to support both "dlg,da9061" and "dlg,da9062". The .data entry now holds a reference to the enumerated device type. A new regmap_irq_chip model is added for DA9061 and this supports the new list of regmap_irq entries. A new mfd_cell da9061_devs[] array lists the new sub system components for DA9061. Support is added for a new DA9061 regmap_config which lists the correct readable, writable and volatile ranges for this chip. The probe function uses the device tree compatible string to switch on the da9062_compatible_types and configure the correct mfd cells, irq chip and regmap config. Kconfig is updated to reflect support for DA9061 and DA9062 PMICs. Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* mfd: syscon: atmel-smc: Add new helpers to ease SMC regs manipulationBoris Brezillon2017-04-271-0/+4
| | | | | | | | | | | | | These new helpers + macro definitions are meant to replace the old ones which are unpractical to use. Note that the macros and function prefixes have been intentionally changed to ATMEL_[H]SMC_XX and atmel_[h]smc_ to reflect the fact that this IP is also embedded in avr32 SoCs (and not only in at91 ones). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* mfd: Add TI LMU driverMilo Kim2017-04-271-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TI LMU (Lighting Management Unit) driver supports lighting devices below. LM3532, LM3631, LM3632, LM3633, LM3695 and LM3697. LMU devices have common features. - I2C interface for accessing device registers - Hardware enable pin control - Backlight brightness control - Notifier for hardware fault monitoring - Regulators for LCD display bias It contains fault monitor, backlight, LED and regulator driver. LMU fault monitor ----------------- LM3633 and LM3697 provide hardware monitoring feature. It enables open or short circuit detection. After monitoring is done, each device should be re-initialized. Notifier is used for this case. Separate patch for 'ti-lmu-fault-monitor' will be sent later. Backlight --------- It's handled by TI LMU backlight consolidated driver and chip dependent data. Separate patchset will be sent later. LED indicator ------------- LM3633 has 6 indicator LEDs. Programmable dimming pattern is also supported. Separate patch for 'leds-lm3633' will be sent later. Regulator --------- LM3631 has 5 regulators for the display bias. LM3632 supports 3 regulators. One consolidated driver enables it. The lm363x regulator driver is already upstreamed. Signed-off-by: Milo Kim <milo.kim@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* mfd: mxs-lradc: Add support for mxs-lradcKsenija Stanojevic2017-03-231-0/+17
| | | | | | | | | Add core files for low resolution analog-to-digital converter (mxs-lradc) MFD driver. Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@gmail.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* mfd: Add support for several boards to Kontron PLD driverMichael Brunner2017-02-131-0/+5
| | | | | | | | | | | This patch adds the DMI system ID of the Kontron COMe-bBD#, COMe-bKL6, COMe-cKL6, COMe-bSL6 and COMe-cAL6 boards to the Kontron PLD driver. The list of supported products in the module description is also updated. Signed-off-by: Michael Brunner <michael.brunner@kontron.com> Acked-by: Christian Rauch <christian.rauch@kontron.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* mfd: cpcap: Add minimal supportTony Lindgren2017-02-131-0/+11
| | | | | | | | | | | | | | | | | | | Many Motorola phones like droid 4 are using a custom PMIC called CPCAP or 6556002. We can support it's core features quite easily with regmap_spi and regmap_irq. The children of cpcap, such as regulators, ADC and USB, can be just regular device drivers and defined in the dts file. They get probed as we call of_platform_populate() at the end of our probe, and then the children can just call dev_get_regmap(dev.parent, NULL) to get the regmap. Cc: devicetree@vger.kernel.org Cc: Marcel Partap <mpartap@gmx.net> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Scott <michael.scott@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* mfd: Kconfig: MFD_SUN4I_GPADC depends on !TOUCHSCREN_SUN4I_GPADCQuentin Schulz2017-02-131-0/+1
| | | | | | | | | | MFD_SUN4I_GPADC and TOUCHSCREEN_SUN4I are incompatible (both are drivers for Allwinner SoCs' ADC). This makes sure TOUCHSCREEN_SUN4I isn't enabled while MFD_SUN4I_GPADC is enabled. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* mfd: Add STM32 Timers driverBenjamin Gaignard2017-01-231-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This hardware block could at used at same time for PWM generation and IIO timers. PWM and IIO timer configuration are mixed in the same registers so we need a multi fonction driver to be able to share those registers. version 7: - rebase on v4.10-rc2 version 6: - rename files to stm32-timers - rename functions to stm32_timers_xxx version 5: - fix Lee comments about detect function - add missing dependency on REGMAP_MMIO version 4: - add a function to detect Auto Reload Register (ARR) size - rename the structure shared with other drivers version 2: - rename driver "stm32-gptimer" to be align with SoC documentation - only keep one compatible - use of_platform_populate() instead of devm_mfd_add_devices() Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* mfd: rn5t618: Add Ricoh RC5T619 PMIC supportPierre-Hugues Husson2016-11-291-1/+2
| | | | | | | | | | | | | | | | The Ricoh RN5T567 is from the same family as the Ricoh RN5T618 is, the differences are: + DCDC4/DCDC5 + LDO7-10 + Slightly different output voltage/currents + 32kHz Output + RTC + USB Charger detection Signed-off-by: Pierre-Hugues Husson <phh@phh.me> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* mfd: sun4i-gpadc: Select regmap-irqArnd Bergmann2016-11-291-0/+1
| | | | | | | | | | | | | The new sun4i mfd driver is lacking a dependency, triggering very rarely int randconfig kernel builds: drivers/mfd/sun4i-gpadc.o: In function `sun4i_gpadc_probe': sun4i-gpadc.c:(.text.sun4i_gpadc_probe+0x110): undefined reference to `devm_regmap_add_irq_chip' This adds a 'select REGMAP_IRQ', as the other drivers with this problem do. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* mfd: abx500-core: Allow driver to built if COMPILE_TEST is enabledJavier Martinez Canillas2016-11-291-1/+1
| | | | | | | | | | | | The driver only has runtime but no build time dependency with ARCH_U300 || ARCH_U8500 So it can be built for testing purposes if COMPILE_TEST option is enabled. This is useful to have more build coverage and make sure that the driver is not affected by changes that could cause build regressions. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* mfd: exynos-lpass: Add hardware dependencyJean Delvare2016-11-291-0/+1
| | | | | | | | | | | This driver is meant for Exynos systems so do not offer the option elsewhere unless build-testing. Cc: Inha Song <ideal.song@samsung.com> Cc: Beomho Seo <beomho.seo@samsung.com> Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* mfd: Enable compile testing for max77620 and max77686Krzysztof Kozlowski2016-11-291-2/+2
| | | | | | | | The OF is not a strict build-time dependency so max77620 and max77686 can be compile tested to increase build coverage. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* mfd: Add support for Allwinner SoCs ADCQuentin Schulz2016-11-291-0/+15
| | | | | | | | | | | | The Allwinner SoCs all have an ADC that can also act as a touchscreen controller and a thermal sensor. For now, only the ADC and the thermal sensor drivers are probed by the MFD, the touchscreen controller support will be added later. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* mfd: qcom-pm8xxx: Clean up PM8XXX namespaceLinus Walleij2016-11-211-9/+5Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Kconfig and file naming for the PM8xxx driver is totally confusing: - Kconfig options MFD_PM8XXX and MFD_PM8921_CORE, some in-kernel users depending on or selecting either at random. - A driver file named pm8921-core.c even if it is indeed used by the whole PM8xxx family of chips. - An irqchip named pm8xxx since it was (I guess) realized that the driver was generic for all pm8xxx PMICs. As I may want to add support for PM8901 this is starting to get really messy. Fix this situation by: - Remove the MFD_PM8921_CORE symbol and rely solely on MFD_PM8XXX and convert all users, including LEDs Kconfig and ARM defconfigs for qcom and multi_v7 to use that single symbol. - Renaming the driver to qcom-pm8xxx.c to fit along the two other qcom* prefixed drivers. - Rename functions withing the driver from 8921 to 8xxx to indicate it is generic. - Just drop the =m config from the pxa_defconfig, I have no clue why it is even there, it is not a Qualcomm platform. (Possibly older Kconfig noise from saveconfig.) Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Abhijeet Dharmapurikar <adharmap@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Gross <andy.gross@linaro.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* Merge tag 'mfd-for-linus-4.9' of ↵Linus Torvalds2016-10-071-3/+23
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Core framework: - Add the MFD bindings doc to MAINTAINERS New drivers: - X-Powers AC100 Audio CODEC and RTC - TI LP873x PMIC - Rockchip RK808 PMIC - Samsung Exynos Low Power Audio New device support: - Add support for STMPE1600 variant to stmpe - Add support for PM8018 PMIC to pm8921-core - Add support for AXP806 PMIC in axp20x - Add support for AXP209 GPIO in axp20x New functionality: - Add support for Reset to all STMPE variants - Add support for MKBP event support to cros_ec - Add support for USB to intel_soc_pmic_bxtwc - Add support for IRQs and Power Button to tps65217 Fix-ups: - Clean-up defunct author emails (da9063, max14577) - Kconfig fixups (wm8350-i2c, as37220 - Constify (altera-a10sr, sm501) - Supply PCI IDs (intel-lpss-pci) - Improve clocking (qcom_rpm) - Fix IRQ probing (ucb1x00-core) - Ensure fault log is cleared (da9052) - Remove NO_IRQ check (ucb1x00-core) - Supply I2C properties (intel-lpss-acpi, intel-lpss-pci) - Non standard declaration (tps65217, max8997-irq) - Remove unused code (lp873x, db8500-prcmu, ab8500-debugfs, cros_ec_spi) - Make non-modular (altera-a10sr, intel_msic, smsc-ece1099, sun6i-prcm, twl-core) - OF bindings (ac100, stmpe, qcom-pm8xxx, qcom-rpm, rk808, axp20x, lp873x, exynos5433-lpass, act8945a, aspeed-scu, twl6040, arizona) Bugfixes: - Release OF pointer (qcom_rpm) - Avoid double shifting in suspend/resume (88pm80x) - Fix 'defined but not used' error (exynos-lpass) - Fix 'sleeping whilst attomic' (atmel-hlcdc)" * tag 'mfd-for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (69 commits) mfd: arizona: Handle probe deferral for reset GPIO mfd: arizona: Remove arizona_of_get_named_gpio helper function mfd: arizona: Add DT options for max_channels_clocked and PDM speaker config mfd: twl6040: Register child device for twl6040-pdmclk mfd: cros_ec_spi: Remove unused variable 'request' mfd: omap-usb-host: Return value is not 'const int' mfd: ab8500-debugfs: Remove 'weak' function suspend_test_wake_cause_interrupt_is_mine() mfd: ab8500-debugfs: Remove ab8500_dump_all_banks_to_mem() mfd: db8500-prcmu: Remove unused *prcmu_set_ddr_opp() calls mfd: ab8500-debugfs: Prevent initialised field from being over-written mfd: max8997-irq: 'inline' should be at the beginning of the declaration mfd: rk808: Fix RK818_IRQ_DISCHG_ILIM initializer mfd: tps65217: Fix nonstandard declaration mfd: lp873x: Remove unused mutex lock from struct lp873x mfd: atmel-hlcdc: Do not sleep in atomic context mfd: exynos-lpass: Mark PM functions as __maybe_unused mfd: intel-lpss: Add default I2C device properties for Apollo Lake mfd: twl-core: Make it explicitly non-modular mfd: sun6i-prcm: Make it explicitly non-modular mfd: smsc-ece1099: Make it explicitly non-modular ...
| * mfd: as3722: Convert MFD_AS3722 from bool to tristatePaul Gortmaker2016-10-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Kconfig currently controlling compilation of this code is: drivers/mfd/Kconfig:config MFD_AS3722 drivers/mfd/Kconfig: bool "ams AS3722 Power Management IC" ...meaning that it currently is not being built as a module by anyone. In response to an earlier patch set suggesting removal of the unused modular code, Laxman suggested that this driver be instead moved to tristate. We do that here, and confirm it can build and modpost as a tristate. However there remains to be runtime testing in order to ensure this change is 100% functional for "=m". Cc: Florian Lobmaier <florian.lobmaier@ams.com> Cc: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| * mfd: tps65217: Add support for IRQsMarcin Niestroj2016-10-041-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for handling IRQs: power button, AC and USB power state changes. Mask and interrupt bits are shared within one register, which prevents us to use regmap_irq implementation. New irq_domain is created in order to add interrupt handling for each tps65217's subsystem. IRQ resources have been added for charger subsystem to be able to notify about AC and USB state changes. Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| * mfd: Add Samsung Exynos Low Power Audio Subsystem driverSylwester Nawrocki2016-10-041-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds common driver for the Top block of the Samsung Exynos SoC Low Power Audio Subsystem. This is a minimal driver which prepares resources for IP blocks like I2S, audio DMA and UART and exposes a regmap for the Top block registers. Also system power ops are added to ensure the Audio Subsystem is operational after system suspend/resume cycle. Signed-off-by: Inha Song <ideal.song@samsung.com> Signed-off-by: Beomho Seo <beomho.seo@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| * mfd: wm8350-i2c: Make sure the i2c regmap functions are compiledUwe Kleine-König2016-10-041-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | This fixes a compile failure: drivers/built-in.o: In function `wm8350_i2c_probe': core.c:(.text+0x828b0): undefined reference to `__devm_regmap_init_i2c' Makefile:953: recipe for target 'vmlinux' failed Fixes: 52b461b86a9f ("mfd: Add regmap cache support for wm8350") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| *---. Merge branches 'ib-mfd-gpio-4.9', 'ib-mfd-gpio-regulator-4.9', ↵Lee Jones2016-10-041-2/+26
| |\ \ \ | | | | | | | | | | | | | | | 'ib-mfd-input-4.9', 'ib-mfd-regulator-4.9', 'ib-mfd-regulator-4.9.1', 'ib-mfd-regulator-rtc-4.9', 'ib-mfd-regulator-rtc-4.9-1' and 'ib-mfd-rtc-4.9' into ibs-for-mfd-merged
| | | | * mfd: ac100: Add driver for X-Powers AC100 audio codec / RTC combo ICChen-Yu Tsai2016-08-081-0/+10
| | |_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The AC100 is a multifunction device with an audio codec subsystem and an RTC subsystem. These two subsystems share a common register space and host interface. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| | | * mfd: rk808: Add RK818 supportWadim Egorov2016-08-311-2/+2
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The RK818 chip is a Power Management IC (PMIC) for multimedia and handheld devices. It contains the following components: - Regulators - RTC - Clocking - Battery support Both RK808 and RK818 chips are using a similar register map, so we can reuse the RTC and Clocking functionality. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Tested-by: Andy Yan <andy.yan@rock-chips.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* | | Merge branch 'ib-move-htc-egpio' into develLinus Walleij2016-09-281-8/+0Star
|\ \ \ | |_|/ |/| |
| * | mfd/gpio: Move HTC GPIO driver to GPIO subsystemLinus Walleij2016-09-281-8/+0Star
| |/ | | | | | | | | | | | | | | | | | | | | | | | | The HTC GPIO driver is a pure GPIO driver and I just can not see what it is doing inside MFD. Let's just move it to GPIO and take this opportunity to move the platform data to <linux/platform_data/gpio-htc-egpio.h> Cc: arm@kernel.org Cc: Russell King <linux@armlinux.org.uk> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* / mfd: lp873x: Add lp873x PMIC supportKeerthy2016-08-311-0/+14
|/ | | | | | | | | | | | | | | The LP873X chip is a power management IC for Portable Navigation Systems and Tablet Computing devices. It contains the following components: - Regulators. - Configurable General Purpose Output Signals (GPO). PMIC interacts with the main processor through i2c. PMIC has couple of LDOs (Linear Regulators), couple of BUCKs (Step-Down DC-DC Converter Cores) and GPOs (General Purpose Output Signals). Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* mfd: Add support for COMe-cSL6 and COMe-mAL10 to Kontron PLD driverMichael Brunner2016-06-291-0/+2
| | | | | | | | | | | | | | | This is an unmodified resend of the patch already been sent on February 17 as it seems to have fallen through the net. This patch adds the DMI system ID of the Kontron COMe-cSL6 and COME-mAL10 boards to the Kontron PLD driver. The list of supported products in the module description is also updated. Signed-off-by: Michael Brunner <michael.brunner@kontron.com> Acked-by: Christian Rauch <christian.rauch@kontron.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* mfd: max14577: Allow driver to be built as a moduleJavier Martinez Canillas2016-06-291-2/+2
| | | | | | | | | | The driver's Kconfig symbol is a boolean but nothing prevents the driver to be built as a module instead of built-in. It is true that most system integrators will choose the latter but the config should not restrict it. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* mfd: altr_a10sr: Add Altera Arria10 DevKit System Resource ChipThor Thayer2016-06-291-0/+11
| | | | | | | | | Add support for the Altera Arria10 Development Kit System Resource chip which is implemented using a MAX5 as a external gpio extender with the regmap framework over a SPI bus. Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* mfd: rn5t618: Add Ricoh RN5T567 PMIC supportStefan Agner2016-06-291-3/+4
| | | | | | | | | | | | | | | The Ricoh RN5T567 is from the same family as the Ricoh RN5T618 is, the differences are: + DCDC4 + Slightly different output voltage/currents + 32kHz Output - ADC/Charger capabilities Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* mfd: hi655x: Add MFD driver for hi655xChen Feng2016-05-181-0/+10
| | | | | | | | | | Add PMIC MFD driver to support hisilicon hi665x. Signed-off-by: Chen Feng <puck.chen@hisilicon.com> Signed-off-by: Fei Wang <w.f@huawei.com> Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com> Reviewed-by: Haojian Zhuang <haojian.zhuang@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* mfd: vexpress: Add !ARCH_USES_GETTIMEOFFSET dependencyArnd Bergmann2016-05-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | The MFD_VEXPRESS_SYSREG driver selects CLKSRC_MMIO, which in turn conflicts with ARCH_USES_GETTIMEOFFSET, causing a harmless Kconfig warning when it is set: warning: (ARCH_MVEBU && ARCH_DIGICOLOR && ARCH_GEMINI && ARCH_KEYSTONE && ARCH_MOXART && ARCH_MXS && PLAT_SPEAR && ARCH_SUNXI && ARCH_TEGRA && ARCH_U300 && PLAT_ORION && ARCH_CLPS711X && ARCH_EP93XX && ARCH_NETX && ARCH_IXP4XX && ARCH_KS8695 && ARCH_W90X900 && ARCH_PXA && ARCH_SA1100 && ARCH_OMAP1 && ARCH_BCM_IPROC && ARCH_INTEGRATOR_AP && ARCH_OMAP2PLUS && MFD_VEXPRESS_SYSREG) selects CLKSRC_MMIO which has unmet direct dependencies (!ARCH_USES_GETTIMEOFFSET) This was apparently hidden by the fact that no ARM platform that still sets ARCH_USES_GETTIMEOFFSET has gpiolib support, and we already have a dependency on GPIOLIB that I added a while ago. However, after 296ad4acb8ef ("gpio: remove deps on ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB"), any platform can enable CONFIG_GPIOLIB, and that lets us enable MFD_VEXPRESS_SYSREG as well. This adds an explicit dependency on !ARCH_USES_GETTIMEOFFSET to guarantee that we can enable the CLKSRC_MMIO driver without getting warnings. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* mfd: max77620: Add core driver for MAX77620/MAX20024Laxman Dewangan2016-05-091-0/+15
| | | | | | | | | | | | | | | MAX77620/MAX20024 are Power Management IC from the MAXIM. It supports RTC, multiple GPIOs, multiple DCDC and LDOs, watchdog, clock etc. Add MFD drier to provides common support for accessing the device; additional drivers is developed on respected subsystem in order to use the functionality of the device. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mallikarjun Kasoju <mkasoju@nvidia.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* mfd: cros_ec: Allow building for ARM64Brian Norris2016-04-191-1/+1
| | | | | | | | | There are platforms using the ChromeOS embeded controller on ARM64 now, so let's allow using this driver (without having to use COMPILE_TEST). Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* mfd: max77693: Allow building as a moduleKrzysztof Kozlowski2016-04-191-2/+2
| | | | | | | | | | | The consumer of max77693 regulators on Trats2 board (samsung-usb2-phy driver) supports deferred probing so the max77693 main MFD driver can be built now as a module. This gives more flexibility and removes manual ordering of init calls. Suggested-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* mfd: max77686: Allow driver to be built as a moduleJavier Martinez Canillas2016-03-161-2/+2
| | | | | | | | | The driver's Kconfig symbol is a boolean but nothing prevents the driver to be built as a module instead of built-in. It is true that most system integrators will choose the latter but the config should not restrict it. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* mfd: act8945a: Add Active-semi ACT8945A PMIC MFD driverWenyou Yang2016-03-161-0/+11
| | | | | | | | | | | | | | | This patch adds support for the Active-semi ACT8945A PMIC. It is a Multi Function Device with the following subdevices: - Regulator - Charger It is interfaced to the host controller using I2C interface, ACT8945A is a child device of the I2C. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-22 14:15:14 +0200