summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/maps/Kconfig
Commit message (Collapse)AuthorAgeFilesLines
* mtd: physmap_of_gemini: Handle pin controlLinus Walleij2018-12-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This enables the complex mapping for the Gemini and kicks in custom read/write functions that will wrap the existing simple functions in calls to enable/disable the parallel flash pins using pin controls. This is necessary on some hardware such as the D-Link DIR-685 where all flash pins are patched in/out at the same time, but some of the flash pins are in practice unused by the flash and have anyway been reused as GPIO. This concerns specifically CE1 on the Gemini. There is only one flash chip, so only CE0 is used, and the line for CE1 has been reused as chip select for the emulated SPI port connected to the display. If we try to use the same lines for flash and GPIO at the same time, one of them will loose: the GPIO line will disappear because it gets disconnected from the pin when the flash group is muxed out. Fix this by introducing two pin control states named simply "enabled" and "disabled" and only enable the flash lines when absolutely necessary (during read/write/copy). This way, they are available for GPIO at all other times and the display works. Collect all the state variables in a struct named struct gemini_flash and allocate this struct at probe time. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
* mtd: maps: Get rid of the latch-addr-flash driverBoris Brezillon2018-11-061-9/+0Star
| | | | | | | | | | | | | | | Looks like this driver was initially added to support the NOR on the DA830-EVM (Davinci) board, but the board file update was never merged. Keeping unused drivers just adds to the maintenance burden, so let's remove it if nobody uses it. Cc: David Griego <dgriego@mvista.com> Cc: Aleksey Makarov <amakarov@ru.mvista.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Savinay Dharmappa <savinay.dharmappa@ti.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Acked-by: Sekhar Nori <nsekhar@ti.com>
* mtd: maps: Merge gpio-addr-flash.c into physmap-core.cBoris Brezillon2018-11-051-10/+9Star
| | | | | | | | | | | | | | | Controlling some MSB address lines using GPIOs is just a small deviation from the generic physmap logic, and merging those two drivers allows us to share most of the probe logic, which is a good thing. Also, the gpio-addr-flash driver is unused since the removal of the blackfin arch in v4.17, so we can safely remove the old driver without risking breaking existing boards. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Tested-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
* mtd: maps: Rename physmap_of_{versatile, gemini} into physmap-{versatile, ↵Boris Brezillon2018-11-051-2/+2
| | | | | | | | | | | | gemini} Now that the physmap_of driver is gone, the gemini and versative extensions are part of the physmap driver. Rename the source files and the config option to reflect this. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
* mtd: maps: Merge physmap_of.c into physmap-core.cBoris Brezillon2018-11-051-2/+2
| | | | | | | | | | There's no real reason to have two separate driver for the DT and pdata case. Just do what we do everywhere else and handle DT and pdata parsing in the same driver. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
* mtd: Make Kconfig formatting consistentBoris Brezillon2018-07-191-12/+12
| | | | | | | | Fix indentation and replace '---help---' by 'help' to make things consistent. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: maps: remove bfin-async-flash driverArnd Bergmann2018-03-211-10/+0Star
| | | | | | | | The blackfin architecture is getting removed, so this driver has become obsolete. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
* mtd: physmap_of: add a hook for Gemini flash probingLinus Walleij2017-02-081-1/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to support device tree probing of Gemini NOR flash chips, a certain register in the syscon needs to be poked to enable parallel flash mode. Such things used to happen in "necessarily different" board file code, and this indeed was also done for the Gemini, so the MTD driver could treat it as any memory-mapped NOR flash, but this is not the way in the future: board files need to go, and hardware concerns distributed down to the applicable drivers. This adds a hook in the same way that the Versatile did: if the Kconfig symbol is not selected the net total of supporting Gemini should be zero bytes of added code. To live up to this promise, also the return value error print from the Versatile extra probe call get to be removed in this patch, all printing need to happen in the add-ons. Cc: Janos Laube <janos.dev@gmail.com> Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com> Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* ARM: realview: imply device tree bootLinus Walleij2016-08-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | This reduces the Kconfig for the RealView by assuming we are always booting from the device tree, and removing all the uses of CONFIG_REALVIEW_DT and replacing with CONFIG_ARCH_REALVIEW. Further: - Drop REALVIEW_HIGH_PHYS_OFFSET: we don't use this with device tree. - Drop the REALVIEW_EB_ARM11MP_REVB option: we now handle this by simply using another device tree. - Drop the PB1176 secure flash option: this is defined in the PB1176 device tree but marked as "disabled", so users who want to use it can simply enable it in the device tree and go hacking around. Cc: Brian Norris <computersforpeace@gmail.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* mtd: physmap_of: add a hook for Versatile write protectionLinus Walleij2016-04-041-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to support device tree probing of Versatile NOR flash chips, there must be a way to add the VPP (write protection) enable/disable callback. The register in question is in the system controllers of these machines. Apart from this quirk, the ARM flash chips are standard CFI flash chips from various vendors. Additionally, the Integrator/AP require you to set up the external bus interface (EBI) to allow writes to the chip select where the flash memory is connected. Solve this by looking for the arm,versatile-flash compatible string in the flash device tree node. In the driver, add a special hook to check for the various Versatile syscons and register a callback for .set_vpp() if this compatible is present. Provide a special Kconfig entry for the addon hook so it will not be compiled in if the Versatile boards are not supported. Stubs in the header file make sure the impact will be zero on other platforms. (Compilers optimze this out.) With this patch, a large slew of ARM board file code can be removed. Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* mtd: Allow compile test of GPIO consumers if !GPIOLIBGeert Uytterhoeven2015-05-211-1/+1
| | | | | | | | | | | | | | The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer functionality only, can still be compiled if GPIOLIB is not enabled. Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where appropriate. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: linux-mtd@lists.infradead.org Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: replace CONFIG_8xx by CONFIG_PPC_8xxChristophe Leroy2015-03-311-1/+1
| | | | | | | | | | | | | | | | | | Two config options exist to define powerpc MPC8xx: * CONFIG_PPC_8xx * CONFIG_8xx In addition, CONFIG_PPC_8xx also defines CONFIG_CPM1 as communication co-processor arch/powerpc/platforms/Kconfig.cputype has contained the following comment about CONFIG_8xx item for some years: "# this is temp to handle compat with arch=ppc" It looks like not many places still have that old CONFIG_8xx used, so it is likely to be a good time to get rid of it completely ? Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: maps: solutionengine: drop excess dependencyBrian Norris2014-08-191-1/+1
| | | | | | | Already depends on SOLUTION_ENGINE, so we don't need the SUPERH dependency too. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: Fix Elan SC520 dependenciesJean Delvare2014-05-121-2/+2
| | | | | | | | | | | | Anyone working with an AMD Elan SC520 development or evaluation board would be building a dedicated kernel for it, so we can make the sc520cdp and netsc520 maps depend on MELAN. SC520_CPUFREQ already depends on MELAN so it makes things more consistent. It also makes kernel configuration for every other x86 user easier. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: allow CONFIG_MTD_PHYSMAP_OF also for CONFIG_MTD_RAMPhilippe De Muyter2014-03-111-4/+4
| | | | | | | | | | | Up to now mtd-ram devices described in device trees were only accessible if mtd-flash or mtd-rom were also configured at linux configuration time, because MTD_PHYSMAP_OF was only available if (MTD_CFI || MTD_JEDECPROBE || MTD_ROM). Allow MTD_PHYSMAP_OF selection also when only MTD_RAM is set. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: ts5500: Add dependencyJean Delvare2014-03-111-1/+1
| | | | | | | | | | There is no point in displaying the TS5500-specific driver entries if TS5500 board support itself isn't enabled. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: remove obsolete JEDEC mapping driversPaul Bolle2013-08-051-18/+0Star
| | | | | | | | | | | | | JEDEC device support was removed in v2.6.22. (It had been marked as BROKEN (indirectly) since at least v2.6.12.) When it was removed the two JEDEC mapping drivers that depended on it should have been removed too. Do so now. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* ARM: clps711x: autcpu12: Special driver for handling memory is removedAlexander Shiyan2013-06-121-7/+0Star
| | | | | | | | This patch provide migration to using "mtd-ram" driver instead of using special driver for handling NVRAM memory. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Olof Johansson <olof@lixom.net>
* Merge tag 'for-linus-20130509' of git://git.infradead.org/linux-mtdLinus Torvalds2013-05-091-77/+0Star
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MTD update from David Woodhouse: - Lots of cleanups from Artem, including deletion of some obsolete drivers - Support partitions larger than 4GiB in device tree - Support for new SPI chips * tag 'for-linus-20130509' of git://git.infradead.org/linux-mtd: (83 commits) mtd: omap2: Use module_platform_driver() mtd: bf5xx_nand: Use module_platform_driver() mtd: denali_dt: Remove redundant use of of_match_ptr mtd: denali_dt: Change return value to fix smatch warning mtd: denali_dt: Use module_platform_driver() mtd: denali_dt: Fix incorrect error check mtd: nand: subpage write support for hardware based ECC schemes mtd: omap2: use msecs_to_jiffies() mtd: nand_ids: use size macros mtd: nand_ids: improve LEGACY_ID_NAND macro a bit mtd: add 4 Toshiba nand chips for the full-id case mtd: add the support to parse out the full-id nand type mtd: add new fields to nand_flash_dev{} mtd: sh_flctl: Use of_match_ptr() macro mtd: gpio: Use of_match_ptr() macro mtd: gpio: Use devm_kzalloc() mtd: davinci_nand: Use of_match_ptr() mtd: dataflash: Use of_match_ptr() macro mtd: remove h720x flash support mtd: onenand: remove OneNAND simulator ...
| * mtd: remove h720x flash supportArnd Bergmann2013-04-051-7/+0Star
| | | | | | | | | | | | | | | | | | The h720x platform support is going away in linux-3.10, so the MTD driver will also not be needed any more. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: remove the ixp2000 map driverArtem Bityutskiy2013-04-051-9/+0Star
| | | | | | | | | | | | | | | | This driver depends on CONFIG_IXP2000 which is not defined anywhere, which means this driver is dead. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: remove the dilnetpc map driver supportArtem Bityutskiy2013-04-051-16/+0Star
| | | | | | | | | | | | | | | | This driver is marked as broken for very long time. Most probably this board is just something ancient no one cares about anyway. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: remove the tqm8xxl map driverArtem Bityutskiy2013-04-051-10/+0Star
| | | | | | | | | | | | | | | | This driver depends on the CONFIG_TQM8xxL symbol, which is not defined anywhere, which means that this driver is dead. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: maps: kill the rpxlite map driverArtem Bityutskiy2013-04-051-10/+0Star
| | | | | | | | | | | | | | | | | | | | | | This driver depends on the CONFIG_RPXCLASSIC and CONFIG_RPXLITE symbols, which are not defined anywhere, and this means that this driver is dead. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: linux-pcmcia@lists.infradead.org Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: linux-m68k@lists.linux-m68k.org Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: remove the mbx860 map driverArtem Bityutskiy2013-04-051-8/+0Star
| | | | | | | | | | | | | | | | | | | | | | This driver depends on CONFIG_MBX which is not defined anywhere, which means this driver is dead. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: linux-pcmcia@lists.infradead.org Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: linux-m68k@lists.linux-m68k.org Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: remove the dmv182 map driverArtem Bityutskiy2013-04-051-9/+0Star
| | | | | | | | | | | | | | | | This driver depends on the CONFIG_DMV182 symbol which is not defined anywhere, and this means that this driver is dead. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: remove the dbox2-flash map driverArtem Bityutskiy2013-04-051-8/+0Star
| | | | | | | | | | | | | | | | This driver depends on the CONFIG_DBOX2 symbol which does not exist in the kernel, which means the driver is dead. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* | Convert selectors of GENERIC_GPIO to GPIOLIBAlexandre Courbot2013-04-161-1/+1
|/ | | | | | | | | GENERIC_GPIO is now equivalent to GPIOLIB and features that depended on GENERIC_GPIO can now depend on GPIOLIB to allow removal of this option. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca>
* mtd: uclinux: support ROM and allow passing the base addressUwe Kleine-König2013-02-041-1/+1
| | | | | | | | | | | | | This allows to put the filesystem at a defined address in ROM allowing to save more precious RAM. I think it's safe to default to ROM because the intention of using the uclinux map is to use a romfs and so mtd-ram doesn't give you anything that mtd-rom doesn't. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* Merge tag 'for-linus-20121219' of git://git.infradead.org/linux-mtdLinus Torvalds2012-12-191-7/+0Star
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MTD updates from David Woodhouse: - Various cleanups especially in NAND tests - Add support for NAND flash on BCMA bus - DT support for sh_flctl and denali NAND drivers - Kill obsolete/superceded drivers (fortunet, nomadik_nand) - Fix JFFS2 locking bug in ENOMEM failure path - New SPI flash chips, as usual - Support writing in 'reliable mode' for DiskOnChip G4 - Debugfs support in nandsim * tag 'for-linus-20121219' of git://git.infradead.org/linux-mtd: (96 commits) mtd: nand: typo in nand_id_has_period() comments mtd: nand/gpio: use io{read,write}*_rep accessors mtd: block2mtd: throttle writes by calling balance_dirty_pages_ratelimited. mtd: nand: gpmi: reset BCH earlier, too, to avoid NAND startup problems mtd: nand/docg4: fix and improve read of factory bbt mtd: nand/docg4: reserve bb marker area in ecclayout mtd: nand/docg4: add support for writing in reliable mode mtd: mxc_nand: reorder part_probes to let cmdline override other sources mtd: mxc_nand: fix unbalanced clk_disable() in error path mtd: nandsim: Introduce debugfs infrastructure mtd: physmap_of: error checking to prevent a NULL pointer dereference mtg: docg3: potential divide by zero in doc_write_oob() mtd: bcm47xxnflash: writing support mtd: tests/read: initialize buffer for whole next page mtd: at91: atmel_nand: return bit flips for the PMECC read_page() mtd: fix recovery after failed write-buffer operation in cfi_cmdset_0002.c mtd: nand: onfi need to be probed in 8 bits mode mtd: nand: add NAND_BUSWIDTH_AUTO to autodetect bus width mtd: nand: print flash size during detection mted: nand_wait_ready timeout fix ...
| * mtd: Drop FORTUNET supportAlexander Shiyan2012-11-221-7/+0Star
| | | | | | | | | | | | | | | | The kernel has never contained the symbol SA1100_FORTUNET so the driver never compiled and can be removed safely. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* | ARM: clps711x: cdb89712: Special driver for handling memory is removedAlexander Shiyan2012-11-211-7/+0Star
|/ | | | | | | | This patch provide migration to using "physmap-flash" and "mtd-ram" drivers instead of using special driver for handling memory. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Olof Johansson <olof@lixom.net>
* mtd: allow uclinux map driver to be used on any ColdFire CPU platformGreg Ungerer2012-09-291-1/+1
| | | | | | | | | | | | | | | | | The uclinux.c map driver has traditionally been used only on non-MMU based systems. But there is no fundamental reason it can't be used on systems running with virtual memory. Some ColdFire CPU based systems now have full paged MMU hardware and can use the uclinux.c mapping driver, so making the uclinux.c driver configuration depend on !CONFIG_MMU doesn't make sense now. Allow the CONFIG_MTD_UCLINUX option to be enabled if CONFIG_COLDFIRE is enabled. (I have chosen not to just more generally allow uclinux.c for any MMU type to keep this option hidden for most systems that are not interested in setting it). Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: autcpu12-nvram: Convert driver to platform_deviceAlexander Shiyan2012-09-291-1/+1
| | | | | | | | | | Because we can have a single kernel to support multiple machines, we need to make loading specific drivers for the target platform only. For this, driver is converted to the platform driver. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: delete SBC82xx/SBC8560 MTD mapping supportPaul Gortmaker2012-07-061-12/+0Star
| | | | | | | | | | | | | The SBC8260 support was dropped back when we moved from ppc to powerpc. We are now also dropping the support for the EOL SBC8560, so we can also delete this mapping support, as they were the only users of it. Artem: also remove the symbol from the Makefile. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: fix scb2_flash build when PCI is not enabledRandy Dunlap2012-05-141-1/+1
| | | | | | | | | | | | | scb2_flash.c is a PCI driver, but its build fails when CONFIG_PCI is not enabled, so make it depend on PCI. drivers/mtd/maps/scb2_flash.c:237:1: warning: data definition has no type or storage class drivers/mtd/maps/scb2_flash.c:237:1: warning: type defaults to 'int' in declaration of 'module_pci_driver' drivers/mtd/maps/scb2_flash.c:237:1: warning: parameter names (without types) in function declaration Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* MTD: Relax dependenciesRichard Weinberger2012-03-251-0/+1
| | | | | | | CONFIG_GENERIC_IO is just enough for the basic MTD stuff. Signed-off-by: Richard Weinberger <richard@nod.at> Acked-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: maps: remove the now unused bcm963xx-flashJonas Gorski2012-01-091-10/+0Star
| | | | | | | | | bcm963xx-flash does nothing meaningful anymore. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: maps: bcm963xx-flash: make CFE partition parsing an mtd parserJonas Gorski2012-01-091-0/+1
| | | | | | | | | | | | Recent BCM63XX devices support a variety of flash types (parallel, SPI, NAND) and share the partition layout. To prevent code duplication make the CFE partition parsing code a stand alone mtd parser to allow SPI or NAND flash drivers to use it. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: drop Integrator flash map KconfigLinus Walleij2011-09-111-4/+0Star
| | | | | | | | | The integrator flash has been deleted, even from the Makefile. Drop the Kconfig entry as well. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
* mtd: Kbuild: remove reference to MTD_PARTITIONSBrian Norris2011-09-111-1/+0Star
| | | | | Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
* mtd: maps: drop edb7312 supportDmitry Eremin-Solenikov2011-09-111-7/+0Star
| | | | | | | | | | EDB7312 isn't supported by mainline kernel, this driver wasn't working before recent fixes, the same functionality can be achieved via physmap, so drop it now. If the board support will ever be submitted to mainline, one either can revert this commit, or use physmap mtd map driver. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
* mtd: drop physmap_configureDmitry Eremin-Solenikov2011-09-111-6/+0Star
| | | | | | | | | physmap_configure() and physmap_set_partitions() have no users in kernel. Out of kernel users should have been converted to regular platform device long ago. Drop support for this obsolete API. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
* mtd: drop ceiva map driverDmitry Eremin-Solenikov2011-09-111-8/+0Star
| | | | | | | | | | It's a Ceiva/Polaroid PhotoMax Digital Picture Frame. Support for it was commited before 2.6.12-rc2, current git contains no functional changes since it's start. Driver containing MTD support for that board was broken for some time already. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
* Merge git://git.infradead.org/mtd-2.6Linus Torvalds2011-05-281-15/+8Star
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.infradead.org/mtd-2.6: (97 commits) mtd: kill CONFIG_MTD_PARTITIONS mtd: remove add_mtd_partitions, add_mtd_device and friends mtd: convert remaining users to mtd_device_register() mtd: samsung onenand: convert to mtd_device_register() mtd: omap2 onenand: convert to mtd_device_register() mtd: txx9ndfmc: convert to mtd_device_register() mtd: tmio_nand: convert to mtd_device_register() mtd: socrates_nand: convert to mtd_device_register() mtd: sharpsl: convert to mtd_device_register() mtd: s3c2410 nand: convert to mtd_device_register() mtd: ppchameleonevb: convert to mtd_device_register() mtd: orion_nand: convert to mtd_device_register() mtd: omap2: convert to mtd_device_register() mtd: nomadik_nand: convert to mtd_device_register() mtd: ndfc: convert to mtd_device_register() mtd: mxc_nand: convert to mtd_device_register() mtd: mpc5121_nfc: convert to mtd_device_register() mtd: jz4740_nand: convert to mtd_device_register() mtd: h1910: convert to mtd_device_register() mtd: fsmc_nand: convert to mtd_device_register() ... Fixed up trivial conflicts in - drivers/mtd/maps/integrator-flash.c: removed in ARM tree - drivers/mtd/maps/physmap.c: addition of afs partition probe type clashing with removal of CONFIG_MTD_PARTITIONS
| * mtd: kill CONFIG_MTD_PARTITIONSJamie Iles2011-05-251-9/+5Star
| | | | | | | | | | | | | | | | | | Now that none of the drivers use CONFIG_MTD_PARTITIONS we can remove it from Kconfig and the last remaining uses. Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: uclinux: convert to mtd_device_register()Jamie Iles2011-05-251-1/+1
| | | | | | | | | | | | | | | | | | Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: scx200_docflash: convert to mtd_device_register()Jamie Iles2011-05-251-1/+1
| | | | | | | | | | | | | | | | | | Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: sa1100-flash: convert to mtd_device_register()Jamie Iles2011-05-251-1/+1
| | | | | | | | | | | | | | | | | | Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: gpio-addr-flash: convert to mtd_device_register()Jamie Iles2011-05-251-1/+0Star
| | | | | | | | | | | | | | | | | | Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-23 23:52:26 +0200