summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
Commit message (Collapse)AuthorAgeFilesLines
* cxgb4: Prefer pcie_capability_read_word()Frederick Lawler2019-07-211-4/+2Star
| | | | | | | | | | | | | | Commit 8c0d3a02c130 ("PCI: Add accessors for PCI Express Capability") added accessors for the PCI Express Capability so that drivers didn't need to be aware of differences between v1 and v2 of the PCI Express Capability. Replace pci_read_config_word() and pci_write_config_word() calls with pcie_capability_read_word() and pcie_capability_write_word(). Signed-off-by: Frederick Lawler <fred@fredlawl.com> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: flow_offload: rename tc_cls_flower_offload to flow_cls_offloadPablo Neira Ayuso2019-07-091-4/+4
| | | | | | | | | | | | And any other existing fields in this structure that refer to tc. Specifically: * tc_cls_flower_offload_flow_rule() to flow_cls_offload_flow_rule(). * TC_CLSFLOWER_* to FLOW_CLS_*. * tc_cls_common_offload to tc_cls_common_offload. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers: net: use flow block APIPablo Neira Ayuso2019-07-091-1/+4
| | | | | | | | | | | | | This patch updates flow_block_cb_setup_simple() to use the flow block API. Several drivers are also adjusted to use it. This patch introduces the per-driver list of flow blocks to account for blocks that are already in use. Remove tc_block_offload alias. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: flow_offload: add flow_block_cb_setup_simple()Pablo Neira Ayuso2019-07-091-21/+5Star
| | | | | | | | | | | | | | | | | | | | | | | Most drivers do the same thing to set up the flow block callbacks, this patch adds a helper function to do this. This preparation patch reduces the number of changes to adapt the existing drivers to use the flow block callback API. This new helper function takes a flow block list per-driver, which is set to NULL until this driver list is used. This patch also introduces the flow_block_command and flow_block_binder_type enumerations, which are renamed to use FLOW_BLOCK_* in follow up patches. There are three definitions (aliases) in order to reduce the number of updates in this patch, which go away once drivers are fully adapted to use this flow block API. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4: Add MPS refcounting for alloc/free mac filtersRaju Rangoju2019-06-241-3/+9
| | | | | | | | This patch adds reference counting support for alloc/free mac filters Signed-off-by: Raju Rangoju <rajur@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4: Add MPS TCAM refcounting for cxgb4 change macRaju Rangoju2019-06-241-7/+7
| | | | | | | | This patch adds TCAM reference counting support for cxgb4 change mac path Signed-off-by: Raju Rangoju <rajur@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4: Re-work the logic for mps refcountingRaju Rangoju2019-06-241-10/+4Star
| | | | | | | | | | | | Remove existing mps refcounting code which was added only for encap filters and add necessary data structures/functions to support mps reference counting for all the mac filters. Also add wrapper functions for allocating and freeing encap mac filters. Signed-off-by: Raju Rangoju <rajur@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4/libcxgb/cxgb4i/cxgbit: enable eDRAM page pods for iSCSIVarun Prakash2019-06-101-0/+57
| | | | | | | | Page pods are used for direct data placement, this patch enables eDRAM page pods if firmware supports this feature. Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4: Set initial IRQ affinity hintsNirranjan Kirubaharan2019-06-091-8/+48
| | | | | | | | | Spread initial IRQ affinity hints across the device node CPUs, for nic queue and uld queue IRQs, to load balance and avoid all interrupts on CPU0. Signed-off-by: Nirranjan Kirubaharan <nirranjan@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4: Enable hash filter with offloadVishal Kulkarni2019-05-231-9/+43
| | | | | | | | | | | | | Hash (exact-match) filters used for offloading flows share the same active region resources on the chip with upper layer drivers, like iw_cxgb4, chcr, etc. Currently, only either Hash filters or ULDs can use the active region resources, but not both. Hence, use the new firmware configuration parameters (when available) to allow both the Hash filters and ULDs to share the active region simultaneously. Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2019-05-081-3/+12
|\ | | | | | | | | | | Minor conflict with the DSA legacy code removal. Signed-off-by: David S. Miller <davem@davemloft.net>
| * cxgb4: Fix error path in cxgb4_init_moduleYueHaibing2019-05-071-3/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BUG: unable to handle kernel paging request at ffffffffa016a270 PGD 3270067 P4D 3270067 PUD 3271063 PMD 230bbd067 PTE 0 Oops: 0000 [#1 CPU: 0 PID: 6134 Comm: modprobe Not tainted 5.1.0+ #33 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:atomic_notifier_chain_register+0x24/0x60 Code: 1f 80 00 00 00 00 55 48 89 e5 41 54 49 89 f4 53 48 89 fb e8 ae b4 38 01 48 8b 53 38 48 8d 4b 38 48 85 d2 74 20 45 8b 44 24 10 <44> 3b 42 10 7e 08 eb 13 44 39 42 10 7c 0d 48 8d 4a 08 48 8b 52 08 RSP: 0018:ffffc90000e2bc60 EFLAGS: 00010086 RAX: 0000000000000292 RBX: ffffffff83467240 RCX: ffffffff83467278 RDX: ffffffffa016a260 RSI: ffffffff83752140 RDI: ffffffff83467240 RBP: ffffc90000e2bc70 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 00000000014fa61f R12: ffffffffa01c8260 R13: ffff888231091e00 R14: 0000000000000000 R15: ffffc90000e2be78 FS: 00007fbd8d7cd540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffa016a270 CR3: 000000022c7e3000 CR4: 00000000000006f0 Call Trace: register_inet6addr_notifier+0x13/0x20 cxgb4_init_module+0x6c/0x1000 [cxgb4 ? 0xffffffffa01d7000 do_one_initcall+0x6c/0x3cc ? do_init_module+0x22/0x1f1 ? rcu_read_lock_sched_held+0x97/0xb0 ? kmem_cache_alloc_trace+0x325/0x3b0 do_init_module+0x5b/0x1f1 load_module+0x1db1/0x2690 ? m_show+0x1d0/0x1d0 __do_sys_finit_module+0xc5/0xd0 __x64_sys_finit_module+0x15/0x20 do_syscall_64+0x6b/0x1d0 entry_SYSCALL_64_after_hwframe+0x49/0xbe If pci_register_driver fails, register inet6addr_notifier is pointless. This patch fix the error path in cxgb4_init_module. Fixes: b5a02f503caa ("cxgb4 : Update ipv6 address handling api") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | cxgb4: Delete all hash and TCAM filters before resource cleanupVishal Kulkarni2019-04-281-5/+5
| | | | | | | | | | | | | | | | | | During driver unload, hash/TCAM filter deletion doesn't wait for completion.This patch deletes all the filters with completion before clearing the resources. Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: remove 'fallback' argument from dev->ndo_select_queue()Paolo Abeni2019-03-201-3/+2Star
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | After the previous patch, all the callers of ndo_select_queue() provide as a 'fallback' argument netdev_pick_tx. The only exceptions are nested calls to ndo_select_queue(), which pass down the 'fallback' available in the current scope - still netdev_pick_tx. We can drop such argument and replace fallback() invocation with netdev_pick_tx(). This avoids an indirect call per xmit packet in some scenarios (TCP syn, UDP unconnected, XDP generic, pktgen) with device drivers implementing such ndo. It also clean the code a bit. Tested with ixgbe and CONFIG_FCOE=m With pktgen using queue xmit: threads vanilla patched (kpps) (kpps) 1 2334 2428 2 4166 4278 4 7895 8100 v1 -> v2: - rebased after helper's name change Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4/chtls: Prefix adapter flags with CXGB4Arjun Vynipadath2019-03-041-50/+51
| | | | | | | | | Some of these macros were conflicting with global namespace, hence prefixing them with CXGB4. Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4: Add VF Link state supportArjun Vynipadath2019-03-021-6/+51
| | | | | | | | | Use ndo_set_vf_link_state to control the link states associated with the virtual interfaces. Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4: Enable outer UDP checksum offload for T6Arjun Vynipadath2019-02-281-0/+2
| | | | | | | | | | T6 adapters support outer UDP checksum offload for encapsulated packets, hence enabling netdev feature flag NETIF_F_GSO_UDP_TUNNEL_CSUM. Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4/cxgb4vf: Fix up netdev->hw_featuresArjun Vynipadath2019-02-281-2/+2
| | | | | | | | | | | | GRO is done by cxgb4/cxgb4vf. Hence set NETIF_F_GRO flag for both cxgb4/cxgb4vf. Cleaned up VLAN netdev features in cxgb4vf. Also fixed NETIF_F_HIGHDMA being set unconditionally for vlan netdev features. Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4: Add capability to get/set SGE Doorbell Queue Timer TickVishal Kulkarni2019-02-141-2/+12
| | | | | | | | | This patch gets/sets SGE Doorbell Queue timer ticks via ethtool Original work by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4/cxgb4vf: Add support for SGE doorbell queue timerVishal Kulkarni2019-02-141-4/+15
| | | | | | | | | | | | | | | | | | | | | T6 introduced a Timer Mechanism in SGE called the SGE Doorbell Queue Timer. With this we can now configure TX Queues to get CIDX Updates when: Time(CIDX == PIDX) >= Timer Previously we rely on TX Queue Status Page updates by hardware for DMA completions. This will make Hardware/Firmware actually deliver the CIDX Updates as Ingress Queue messages with commensurate Interrupts. So we now have a new RX Path component for processing CIDX Updates and reclaiming TX Descriptors faster. Original work by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4/cxgb4vf: Program hash region for {t4/t4vf}_change_mac()Arjun Vynipadath2019-02-031-12/+59
| | | | | | | | | | | | | | {t4/t4_vf}_change_mac() API's were only doing additions to MPS_TCAM. This will fail, when the number of tcam entries is limited particularly in vf's. This fix programs hash region with the mac address, when TCAM addtion fails for {t4/t4vf}_change_mac(). Since the locally maintained driver list for hash entries is shared across mac_{sync/unsync}(), added an extra parameter if_mac to track the address added thorugh {t4/t4vf}_change_mac() Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4: TLS record offload enableAtul Gupta2019-01-221-1/+2
| | | | | | | Enable Inline TLS record by default Signed-off-by: Atul Gupta <atul.gupta@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4: number of VFs supported is not always 16Ganesh Goudar2018-11-301-1/+1
| | | | | | | | | | | Total number of VFs supported by PF is used to determine the last byte of VF's mac address. Number of VFs supported is not always 16, use the variable nvfs to get the number of VFs supported rather than hard coding it to 16. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4: use new fw interface to get the VIN and smt indexSantosh Rastapur2018-11-231-29/+29
| | | | | | | | | | | If the fw supports returning VIN/VIVLD in FW_VI_CMD save it in port_info structure else retrieve these from viid and save them in port_info structure. Do the same for smt_idx from FW_VI_MAC_CMD Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4/cxgb4vf: Fix mac_hlist initialization and freeArjun Vynipadath2018-11-201-9/+10
| | | | | | | | | | | | Null pointer dereference seen when cxgb4vf driver is unloaded without bringing up any interfaces, moving mac_hlist initialization to driver probe and free the mac_hlist in remove to fix the issue. Fixes: 24357e06ba51 ("cxgb4vf: fix memleak in mac_hlist initialization") Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2018-11-191-2/+2
|\
| * cxgb4: fix thermal zone build errorGanesh Goudar2018-11-151-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | with CONFIG_THERMAL=m and cxgb4 as built-in build fails, and 'commit e70a57fa59bb ("cxgb4: fix thermal configuration dependencies")' tries to fix it but when cxgb4i is made built-in build fails again, use IS_REACHABLE instead of IS_ENABLED to fix the issue. Fixes: e70a57fa59bb (cxgb4: fix thermal configuration dependencies) Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | cxgb4: free mac_hlist properlyArjun Vynipadath2018-11-101-0/+8
|/ | | | | | | | | The locally maintained list for tracking hash mac table was not freed during driver remove. Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge tag 'pci-v4.20-changes' of ↵Linus Torvalds2018-10-251-1/+0Star
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - Fix ASPM link_state teardown on removal (Lukas Wunner) - Fix misleading _OSC ASPM message (Sinan Kaya) - Make _OSC optional for PCI (Sinan Kaya) - Don't initialize ASPM link state when ACPI_FADT_NO_ASPM is set (Patrick Talbert) - Remove x86 and arm64 node-local allocation for host bridge structures (Punit Agrawal) - Pay attention to device-specific _PXM node values (Jonathan Cameron) - Support new Immediate Readiness bit (Felipe Balbi) - Differentiate between pciehp surprise and safe removal (Lukas Wunner) - Remove unnecessary pciehp includes (Lukas Wunner) - Drop pciehp hotplug_slot_ops wrappers (Lukas Wunner) - Tolerate PCIe Slot Presence Detect being hardwired to zero to workaround broken hardware, e.g., the Wilocity switch/wireless device (Lukas Wunner) - Unify pciehp controller & slot structs (Lukas Wunner) - Constify hotplug_slot_ops (Lukas Wunner) - Drop hotplug_slot_info (Lukas Wunner) - Embed hotplug_slot struct into users instead of allocating it separately (Lukas Wunner) - Initialize PCIe port service drivers directly instead of relying on initcall ordering (Keith Busch) - Restore PCI config state after a slot reset (Keith Busch) - Save/restore DPC config state along with other PCI config state (Keith Busch) - Reference count devices during AER handling to avoid race issue with concurrent hot removal (Keith Busch) - If an Upstream Port reports ERR_FATAL, don't try to read the Port's config space because it is probably unreachable (Keith Busch) - During error handling, use slot-specific reset instead of secondary bus reset to avoid link up/down issues on hotplug ports (Keith Busch) - Restore previous AER/DPC handling that does not remove and re-enumerate devices on ERR_FATAL (Keith Busch) - Notify all drivers that may be affected by error recovery resets (Keith Busch) - Always generate error recovery uevents, even if a driver doesn't have error callbacks (Keith Busch) - Make PCIe link active reporting detection generic (Keith Busch) - Support D3cold in PCIe hierarchies during system sleep and runtime, including hotplug and Thunderbolt ports (Mika Westerberg) - Handle hpmemsize/hpiosize kernel parameters uniformly, whether slots are empty or occupied (Jon Derrick) - Remove duplicated include from pci/pcie/err.c and unused variable from cpqphp (YueHaibing) - Remove driver pci_cleanup_aer_uncorrect_error_status() calls (Oza Pawandeep) - Uninline PCI bus accessors for better ftracing (Keith Busch) - Remove unused AER Root Port .error_resume method (Keith Busch) - Use kfifo in AER instead of a local version (Keith Busch) - Use threaded IRQ in AER bottom half (Keith Busch) - Use managed resources in AER core (Keith Busch) - Reuse pcie_port_find_device() for AER injection (Keith Busch) - Abstract AER interrupt handling to disconnect error injection (Keith Busch) - Refactor AER injection callbacks to simplify future improvments (Keith Busch) - Remove unused Netronome NFP32xx Device IDs (Jakub Kicinski) - Use bitmap_zalloc() for dma_alias_mask (Andy Shevchenko) - Add switch fall-through annotations (Gustavo A. R. Silva) - Remove unused Switchtec quirk variable (Joshua Abraham) - Fix pci.c kernel-doc warning (Randy Dunlap) - Remove trivial PCI wrappers for DMA APIs (Christoph Hellwig) - Add Intel GPU device IDs to spurious interrupt quirk (Bin Meng) - Run Switchtec DMA aliasing quirk only on NTB endpoints to avoid useless dmesg errors (Logan Gunthorpe) - Update Switchtec NTB documentation (Wesley Yung) - Remove redundant "default n" from Kconfig (Bartlomiej Zolnierkiewicz) - Avoid panic when drivers enable MSI/MSI-X twice (Tonghao Zhang) - Add PCI support for peer-to-peer DMA (Logan Gunthorpe) - Add sysfs group for PCI peer-to-peer memory statistics (Logan Gunthorpe) - Add PCI peer-to-peer DMA scatterlist mapping interface (Logan Gunthorpe) - Add PCI configfs/sysfs helpers for use by peer-to-peer users (Logan Gunthorpe) - Add PCI peer-to-peer DMA driver writer's documentation (Logan Gunthorpe) - Add block layer flag to indicate driver support for PCI peer-to-peer DMA (Logan Gunthorpe) - Map Infiniband scatterlists for peer-to-peer DMA if they contain P2P memory (Logan Gunthorpe) - Register nvme-pci CMB buffer as PCI peer-to-peer memory (Logan Gunthorpe) - Add nvme-pci support for PCI peer-to-peer memory in requests (Logan Gunthorpe) - Use PCI peer-to-peer memory in nvme (Stephen Bates, Steve Wise, Christoph Hellwig, Logan Gunthorpe) - Cache VF config space size to optimize enumeration of many VFs (KarimAllah Ahmed) - Remove unnecessary <linux/pci-ats.h> include (Bjorn Helgaas) - Fix VMD AERSID quirk Device ID matching (Jon Derrick) - Fix Cadence PHY handling during probe (Alan Douglas) - Signal Cadence Endpoint interrupts via AXI region 0 instead of last region (Alan Douglas) - Write Cadence Endpoint MSI interrupts with 32 bits of data (Alan Douglas) - Remove redundant controller tests for "device_type == pci" (Rob Herring) - Document R-Car E3 (R8A77990) bindings (Tho Vu) - Add device tree support for R-Car r8a7744 (Biju Das) - Drop unused mvebu PCIe capability code (Thomas Petazzoni) - Add shared PCI bridge emulation code (Thomas Petazzoni) - Convert mvebu to use shared PCI bridge emulation (Thomas Petazzoni) - Add aardvark Root Port emulation (Thomas Petazzoni) - Support 100MHz/200MHz refclocks for i.MX6 (Lucas Stach) - Add initial power management for i.MX7 (Leonard Crestez) - Add PME_Turn_Off support for i.MX7 (Leonard Crestez) - Fix qcom runtime power management error handling (Bjorn Andersson) - Update TI dra7xx unaligned access errata workaround for host mode as well as endpoint mode (Vignesh R) - Fix kirin section mismatch warning (Nathan Chancellor) - Remove iproc PAXC slot check to allow VF support (Jitendra Bhivare) - Quirk Keystone K2G to limit MRRS to 256 (Kishon Vijay Abraham I) - Update Keystone to use MRRS quirk for host bridge instead of open coding (Kishon Vijay Abraham I) - Refactor Keystone link establishment (Kishon Vijay Abraham I) - Simplify and speed up Keystone link training (Kishon Vijay Abraham I) - Remove unused Keystone host_init argument (Kishon Vijay Abraham I) - Merge Keystone driver files into one (Kishon Vijay Abraham I) - Remove redundant Keystone platform_set_drvdata() (Kishon Vijay Abraham I) - Rename Keystone functions for uniformity (Kishon Vijay Abraham I) - Add Keystone device control module DT binding (Kishon Vijay Abraham I) - Use SYSCON API to get Keystone control module device IDs (Kishon Vijay Abraham I) - Clean up Keystone PHY handling (Kishon Vijay Abraham I) - Use runtime PM APIs to enable Keystone clock (Kishon Vijay Abraham I) - Clean up Keystone config space access checks (Kishon Vijay Abraham I) - Get Keystone outbound window count from DT (Kishon Vijay Abraham I) - Clean up Keystone outbound window configuration (Kishon Vijay Abraham I) - Clean up Keystone DBI setup (Kishon Vijay Abraham I) - Clean up Keystone ks_pcie_link_up() (Kishon Vijay Abraham I) - Fix Keystone IRQ status checking (Kishon Vijay Abraham I) - Add debug messages for all Keystone errors (Kishon Vijay Abraham I) - Clean up Keystone includes and macros (Kishon Vijay Abraham I) - Fix Mediatek unchecked return value from devm_pci_remap_iospace() (Gustavo A. R. Silva) - Fix Mediatek endpoint/port matching logic (Honghui Zhang) - Change Mediatek Root Port Class Code to PCI_CLASS_BRIDGE_PCI (Honghui Zhang) - Remove redundant Mediatek PM domain check (Honghui Zhang) - Convert Mediatek to pci_host_probe() (Honghui Zhang) - Fix Mediatek MSI enablement (Honghui Zhang) - Add Mediatek system PM support for MT2712 and MT7622 (Honghui Zhang) - Add Mediatek loadable module support (Honghui Zhang) - Detach VMD resources after stopping root bus to prevent orphan resources (Jon Derrick) - Convert pcitest build process to that used by other tools (iio, perf, etc) (Gustavo Pimentel) * tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits) PCI/AER: Refactor error injection fallbacks PCI/AER: Abstract AER interrupt handling PCI/AER: Reuse existing pcie_port_find_device() interface PCI/AER: Use managed resource allocations PCI: pcie: Remove redundant 'default n' from Kconfig PCI: aardvark: Implement emulated root PCI bridge config space PCI: mvebu: Convert to PCI emulated bridge config space PCI: mvebu: Drop unused PCI express capability code PCI: Introduce PCI bridge emulated config space common logic PCI: vmd: Detach resources after stopping root bus nvmet: Optionally use PCI P2P memory nvmet: Introduce helper functions to allocate and free request SGLs nvme-pci: Add support for P2P memory in requests nvme-pci: Use PCI p2pmem subsystem to manage the CMB IB/core: Ensure we map P2P memory correctly in rdma_rw_ctx_[init|destroy]() block: Add PCI P2P flag for request queue PCI/P2PDMA: Add P2P DMA driver writer's documentation docs-rst: Add a new directory for PCI documentation PCI/P2PDMA: Introduce configfs/sysfs enable attribute helpers PCI/P2PDMA: Add PCI p2pmem DMA mappings to adjust the bus offset ...
| * PCI/AER: Remove pci_cleanup_aer_uncorrect_error_status() callsOza Pawandeep2018-10-021-1/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | After bfcb79fca19d ("PCI/ERR: Run error recovery callbacks for all affected devices"), AER errors are always cleared by the PCI core and drivers don't need to do it themselves. Remove calls to pci_cleanup_aer_uncorrect_error_status() from device driver error recovery functions. Signed-off-by: Oza Pawandeep <poza@codeaurora.org> [bhelgaas: changelog, remove PCI core changes, remove unused variables] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* | cxgb4: fix thermal configuration dependenciesArnd Bergmann2018-10-111-6/+4Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With CONFIG_THERMAL=m, we get a build error: drivers/net/ethernet/chelsio/cxgb4/cxgb4_thermal.c: In function 'cxgb4_thermal_get_trip_type': drivers/net/ethernet/chelsio/cxgb4/cxgb4_thermal.c:48:11: error: 'struct adapter' has no member named 'ch_thermal' Once that is fixed by using IS_ENABLED() checks, we get a link error against the thermal subsystem when cxgb4 is built-in: drivers/net/ethernet/chelsio/cxgb4/cxgb4_thermal.o: In function `cxgb4_thermal_init': cxgb4_thermal.c:(.text+0x180): undefined reference to `thermal_zone_device_register' drivers/net/ethernet/chelsio/cxgb4/cxgb4_thermal.o: In function `cxgb4_thermal_remove': cxgb4_thermal.c:(.text+0x1e0): undefined reference to `thermal_zone_device_unregister' Finally, since CONFIG_THERMAL can be =m, the Makefile fails to pick up the extra file into built-in.a, and we get another link failure against the cxgb4_thermal_init/cxgb4_thermal_remove files, so the Makefile has to be adapted as well to work for both CONFIG_THERMAL=y and =m. Fixes: b18719157762 ("cxgb4: Add thermal zone support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* | cxgb4: Add thermal zone supportGanesh Goudar2018-10-091-0/+8
| | | | | | | | | | | | | | Add thermal zone support to monitor ASIC's temperature. Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | cxgb4: remove duplicated include from cxgb4_main.cYueHaibing2018-09-181-1/+0Star
| | | | | | | | | | | | | | Remove duplicated include. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | cxgb4: when max_tx_rate is 0 disable tx rate limitingGanesh Goudar2018-09-041-2/+23
|/ | | | | | | | | in ndo_set_vf_rate() when max_tx_rate is 0 disable tx rate limiting for that vf. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4: remove set but not used variable 'spd'YueHaibing2018-08-131-8/+0Star
| | | | | | | | | | | | | | Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c: In function 'print_port_info': drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:5147:14: warning: variable 'spd' set but not used [-Wunused-but-set-variable] variable 'spd' is set but not used since commit 547fd27241a8 ("cxgb4: Warn if device doesn't have enough PCI bandwidth") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4: add support to display DCB infoGanesh Goudar2018-08-101-1/+2
| | | | | | | | | display Data Center bridging information in debug fs. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller2018-08-021-0/+2
|\ | | | | | | | | | | | | | | | | | | The BTF conflicts were simple overlapping changes. The virtio_net conflict was an overlap of a fix of statistics counter, happening alongisde a move over to a bonafide statistics structure rather than counting value on the stack. Signed-off-by: David S. Miller <davem@davemloft.net>
| * cxgb4: Added missing break in ndo_udp_tunnel_{add/del}Arjun Vynipadath2018-07-261-0/+2
| | | | | | | | | | | | | | | | | | | | | | Break statements were missing for Geneve case in ndo_udp_tunnel_{add/del}, thereby raw mac matchall entries were not getting added. Fixes: c746fc0e8b2d("cxgb4: add geneve offload support for T6") Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | cxgb4: fix endian to test F_FW_PORT_CMD_DCBXDIS32Ganesh Goudar2018-08-011-4/+3Star
| | | | | | | | | | | | | | | | | | | | | | For FW_PORT_ACTION_GET_PORT_INFO32 messages, the u.info32.lstatus32_to_cbllen32 is 32-bit Big Endian. We need to translate that to CPU Endian in order to test F_FW_PORT_CMD_DCBXDIS32. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: allow fallback function to pass netdevAlexander Duyck2018-07-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For most of these calls we can just pass NULL through to the fallback function as the sb_dev. The only cases where we cannot are the cases where we might be dealing with either an upper device or a driver that would have configured things to support an sb_dev itself. The only driver that has any significant change in this patch set should be ixgbe as we can drop the redundant functionality that existed in both the ndo_select_queue function and the fallback function that was passed through to us. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | net: allow ndo_select_queue to pass netdevAlexander Duyck2018-07-091-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | This patch makes it so that instead of passing a void pointer as the accel_priv we instead pass a net_device pointer as sb_dev. Making this change allows us to pass the subordinate device through to the fallback function eventually so that we can keep the actual code in the ndo_select_queue call as focused on possible on the exception cases. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | cxgb4: Fix the condition to check if the card is T5Ganesh Goudar2018-07-051-1/+1
| | | | | | | | | | | | | | | | | | Use 'chip_ver' rather than 'chip' to check if the card is T5. Fixes: e8d452923ae6 ("cxgb4: clean up init_one") Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | cxgb4: Add support to read actual provisioned resourcesCasey Leedom2018-07-051-35/+99
| | | | | | | | | | | | | | | | | | | | | | | | In highly constrained resources environments (like the 124VF T5 and 248VF T6 configurations), PF4 may not have very many resources at all and we need to adapt to whatever we've been allocated, this patch adds support to get the provisioned resources. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | cxgb4: Add support for FW_ETH_TX_PKT_VM_WRArjun Vynipadath2018-06-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The present TX workrequest(FW_ETH_TX_PKT_WR) cant be used for host->vf communication, since it doesn't loopback the outgoing packets to virtual interfaces on the same port. This can be done using FW_ETH_TX_PKT_VM_WR. This fix depends on ethtool_flags to determine what WR to use for TX path. Support for setting this flags by user is added in next commit. Based on the original work by : Casey Leedom <leedom@chelsio.com> Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: sched: pass extack pointer to block binds and cb registrationJohn Hurley2018-06-261-1/+1
|/ | | | | | | | | | | | Pass the extact struct from a tc qdisc add to the block bind function and, in turn, to the setup_tc ndo of binding device via the tc_block_offload struct. Pass this back to any block callback registrations to allow netlink logging of fails in the bind process. Signed-off-by: John Hurley <john.hurley@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4: when disabling dcb set txq dcb priority to 0Ganesh Goudar2018-06-241-1/+1
| | | | | | | | | | | | | When we are disabling DCB, store "0" in txq->dcb_prio since that's used for future TX Work Request "OVLAN_IDX" values. Setting non zero priority upon disabling DCB would halt the traffic. Reported-by: AMG Zollner Robert <robert@cloudmedia.eu> CC: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* treewide: kvzalloc() -> kvcalloc()Kees Cook2018-06-131-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The kvzalloc() function has a 2-factor argument form, kvcalloc(). This patch replaces cases of: kvzalloc(a * b, gfp) with: kvcalloc(a * b, gfp) as well as handling cases of: kvzalloc(a * b * c, gfp) with: kvzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kvcalloc(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kvzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kvzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kvzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kvzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kvzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kvzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kvzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kvzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kvzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kvzalloc( - sizeof(char) * COUNT + COUNT , ...) | kvzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kvzalloc + kvcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kvzalloc + kvcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kvzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kvzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kvzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kvzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kvzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kvzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kvzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kvzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kvzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kvzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kvzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kvzalloc(C1 * C2 * C3, ...) | kvzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kvzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kvzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kvzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kvzalloc(sizeof(THING) * C2, ...) | kvzalloc(sizeof(TYPE) * C2, ...) | kvzalloc(C1 * C2 * C3, ...) | kvzalloc(C1 * C2, ...) | - kvzalloc + kvcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kvzalloc + kvcalloc ( - (E1) * E2 + E1, E2 , ...) | - kvzalloc + kvcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kvzalloc + kvcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
* treewide: kmalloc() -> kmalloc_array()Kees Cook2018-06-131-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
* Merge tag 'pci-v4.18-changes' of ↵Linus Torvalds2018-06-071-74/+1Star
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - unify AER decoding for native and ACPI CPER sources (Alexandru Gagniuc) - add TLP header info to AER tracepoint (Thomas Tai) - add generic pcie_wait_for_link() interface (Oza Pawandeep) - handle AER ERR_FATAL by removing and re-enumerating devices, as Downstream Port Containment does (Oza Pawandeep) - factor out common code between AER and DPC recovery (Oza Pawandeep) - stop triggering DPC for ERR_NONFATAL errors (Oza Pawandeep) - share ERR_FATAL recovery path between AER and DPC (Oza Pawandeep) - disable ASPM L1.2 substate if we don't have LTR (Bjorn Helgaas) - respect platform ownership of LTR (Bjorn Helgaas) - clear interrupt status in top half to avoid interrupt storm (Oza Pawandeep) - neaten pci=earlydump output (Andy Shevchenko) - avoid errors when extended config space inaccessible (Gilles Buloz) - prevent sysfs disable of device while driver attached (Christoph Hellwig) - use core interface to report PCIe link properties in bnx2x, bnxt_en, cxgb4, ixgbe (Bjorn Helgaas) - remove unused pcie_get_minimum_link() (Bjorn Helgaas) - fix use-before-set error in ibmphp (Dan Carpenter) - fix pciehp timeouts caused by Command Completed errata (Bjorn Helgaas) - fix refcounting in pnv_php hotplug (Julia Lawall) - clear pciehp Presence Detect and Data Link Layer Status Changed on resume so we don't miss hotplug events (Mika Westerberg) - only request pciehp control if we support it, so platform can use ACPI hotplug otherwise (Mika Westerberg) - convert SHPC to be builtin only (Mika Westerberg) - request SHPC control via _OSC if we support it (Mika Westerberg) - simplify SHPC handoff from firmware (Mika Westerberg) - fix an SHPC quirk that mistakenly included *all* AMD bridges as well as devices from any vendor with device ID 0x7458 (Bjorn Helgaas) - assign a bus number even to non-native hotplug bridges to leave space for acpiphp additions, to fix a common Thunderbolt xHCI hot-add failure (Mika Westerberg) - keep acpiphp from scanning native hotplug bridges, to fix common Thunderbolt hot-add failures (Mika Westerberg) - improve "partially hidden behind bridge" messages from core (Mika Westerberg) - add macros for PCIe Link Control 2 register (Frederick Lawler) - replace IB/hfi1 custom macros with PCI core versions (Frederick Lawler) - remove dead microblaze and xtensa code (Bjorn Helgaas) - use dev_printk() when possible in xtensa and mips (Bjorn Helgaas) - remove unused pcie_port_acpi_setup() and portdrv_acpi.c (Bjorn Helgaas) - add managed interface to get PCI host bridge resources from OF (Jan Kiszka) - add support for unbinding generic PCI host controller (Jan Kiszka) - fix memory leaks when unbinding generic PCI host controller (Jan Kiszka) - request legacy VGA framebuffer only for VGA devices to avoid false device conflicts (Bjorn Helgaas) - turn on PCI_COMMAND_IO & PCI_COMMAND_MEMORY in pci_enable_device() like everybody else, not in pcibios_fixup_bus() (Bjorn Helgaas) - add generic enable function for simple SR-IOV hardware (Alexander Duyck) - use generic SR-IOV enable for ena, nvme (Alexander Duyck) - add ACS quirk for Intel 7th & 8th Gen mobile (Alex Williamson) - add ACS quirk for Intel 300 series (Mika Westerberg) - enable register clock for Armada 7K/8K (Gregory CLEMENT) - reduce Keystone "link already up" log level (Fabio Estevam) - move private DT functions to drivers/pci/ (Rob Herring) - factor out dwc CONFIG_PCI Kconfig dependencies (Rob Herring) - add DesignWare support to the endpoint test driver (Gustavo Pimentel) - add DesignWare support for endpoint mode (Gustavo Pimentel) - use devm_ioremap_resource() instead of devm_ioremap() in dra7xx and artpec6 (Gustavo Pimentel) - fix Qualcomm bitwise NOT issue (Dan Carpenter) - add Qualcomm runtime PM support (Srinivas Kandagatla) - fix DesignWare enumeration below bridges (Koen Vandeputte) - use usleep() instead of mdelay() in endpoint test (Jia-Ju Bai) - add configfs entries for pci_epf_driver device IDs (Kishon Vijay Abraham I) - clean up pci_endpoint_test driver (Gustavo Pimentel) - update Layerscape maintainer email addresses (Minghuan Lian) - add COMPILE_TEST to improve build test coverage (Rob Herring) - fix Hyper-V bus registration failure caused by domain/serial number confusion (Sridhar Pitchai) - improve Hyper-V refcounting and coding style (Stephen Hemminger) - avoid potential Hyper-V hang waiting for a response that will never come (Dexuan Cui) - implement Mediatek chained IRQ handling (Honghui Zhang) - fix vendor ID & class type for Mediatek MT7622 (Honghui Zhang) - add Mobiveil PCIe host controller driver (Subrahmanya Lingappa) - add Mobiveil MSI support (Subrahmanya Lingappa) - clean up clocks, MSI, IRQ mappings in R-Car probe failure paths (Marek Vasut) - poll more frequently (5us vs 5ms) while waiting for R-Car data link active (Marek Vasut) - use generic OF parsing interface in R-Car (Vladimir Zapolskiy) - add R-Car V3H (R8A77980) "compatible" string (Sergei Shtylyov) - add R-Car gen3 PHY support (Sergei Shtylyov) - improve R-Car PHYRDY polling (Sergei Shtylyov) - clean up R-Car macros (Marek Vasut) - use runtime PM for R-Car controller clock (Dien Pham) - update arm64 defconfig for Rockchip (Shawn Lin) - refactor Rockchip code to facilitate both root port and endpoint mode (Shawn Lin) - add Rockchip endpoint mode driver (Shawn Lin) - support VMD "membar shadow" feature (Jon Derrick) - support VMD bus number offsets (Jon Derrick) - add VMD "no AER source ID" quirk for more device IDs (Jon Derrick) - remove unnecessary host controller CONFIG_PCIEPORTBUS Kconfig selections (Bjorn Helgaas) - clean up quirks.c organization and whitespace (Bjorn Helgaas) * tag 'pci-v4.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (144 commits) PCI/AER: Replace struct pcie_device with pci_dev PCI/AER: Remove unused parameters PCI: qcom: Include gpio/consumer.h PCI: Improve "partially hidden behind bridge" log message PCI: Improve pci_scan_bridge() and pci_scan_bridge_extend() doc PCI: Move resource distribution for single bridge outside loop PCI: Account for all bridges on bus when distributing bus numbers ACPI / hotplug / PCI: Drop unnecessary parentheses ACPI / hotplug / PCI: Mark stale PCI devices disconnected ACPI / hotplug / PCI: Don't scan bridges managed by native hotplug PCI: hotplug: Add hotplug_is_native() PCI: shpchp: Add shpchp_is_native() PCI: shpchp: Fix AMD POGO identification PCI: mobiveil: Add MSI support PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver PCI/AER: Decode Error Source Requester ID PCI/AER: Remove aer_recover_work_func() forward declaration PCI/DPC: Use the generic pcie_do_fatal_recovery() path PCI/AER: Pass service type to pcie_do_fatal_recovery() PCI/DPC: Disable ERR_NONFATAL handling by DPC ...
| * cxgb4: Report PCIe link properties with pcie_print_link_status()Bjorn Helgaas2018-05-261-74/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously the driver used pcie_get_minimum_link() to warn when the NIC is in a slot that can't supply as much bandwidth as the NIC could use. pcie_get_minimum_link() can be misleading because it finds the slowest link and the narrowest link (which may be different links) without considering the total bandwidth of each link. For a path with a 16 GT/s x1 link and a 2.5 GT/s x16 link, it returns 2.5 GT/s x1, which corresponds to 250 MB/s of bandwidth, not the true available bandwidth of about 1969 MB/s for a 16 GT/s x1 link. Use pcie_print_link_status() to report PCIe link speed and possible limitations instead of implementing this in the driver itself. This finds the slowest link in the path to the device by computing the total bandwidth of each link and compares that with the capabilities of the device. The dmesg change is: - PCIe link speed is %s, device supports %s - PCIe link width is x%d, device supports x%d + %u.%03u Gb/s available PCIe bandwidth (%s x%d link) or, if the device is capable of better performance than is available in the current slot: - A slot with more lanes and/or higher speed is suggested for optimal performance. + %u.%03u Gb/s available PCIe bandwidth, limited by %s x%d link at %s (capable of %u.%03u Gb/s with %s x%d link) Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-06-25 17:13:28 +0200