summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h
Commit message (Collapse)AuthorAgeFilesLines
* cxgb4/libcxgb/cxgb4i/cxgbit: enable eDRAM page pods for iSCSIVarun Prakash2019-06-101-0/+3
| | | | | | | | Page pods are used for direct data placement, this patch enables eDRAM page pods if firmware supports this feature. Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4: use firmware API for validating filter specRaju Rangoju2019-05-231-0/+23
| | | | | | | | | | | | Adds support for validating hardware filter spec configured in firmware before offloading exact match flows. Use the new fw api FW_PARAM_DEV_FILTER_MODE_MASK to read the filter mode and mask from firmware. If the api isn't supported, then fall-back to older way of reading just the mode from indirect register. Signed-off-by: Raju Rangoju <rajur@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4: Enable hash filter with offloadVishal Kulkarni2019-05-231-0/+2
| | | | | | | | | | | | | Hash (exact-match) filters used for offloading flows share the same active region resources on the chip with upper layer drivers, like iw_cxgb4, chcr, etc. Currently, only either Hash filters or ULDs can use the active region resources, but not both. Hence, use the new firmware configuration parameters (when available) to allow both the Hash filters and ULDs to share the active region simultaneously. Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4: Add VF Link state supportArjun Vynipadath2019-03-021-0/+8
| | | | | | | | | Use ndo_set_vf_link_state to control the link states associated with the virtual interfaces. Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4/cxgb4vf: Add support for SGE doorbell queue timerVishal Kulkarni2019-02-141-2/+22
| | | | | | | | | | | | | | | | | | | | | T6 introduced a Timer Mechanism in SGE called the SGE Doorbell Queue Timer. With this we can now configure TX Queues to get CIDX Updates when: Time(CIDX == PIDX) >= Timer Previously we rely on TX Queue Status Page updates by hardware for DMA completions. This will make Hardware/Firmware actually deliver the CIDX Updates as Ingress Queue messages with commensurate Interrupts. So we now have a new RX Path component for processing CIDX Updates and reclaiming TX Descriptors faster. Original work by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4: use new fw interface to get the VIN and smt indexSantosh Rastapur2018-11-231-0/+20
| | | | | | | | | | | If the fw supports returning VIN/VIVLD in FW_VI_CMD save it in port_info structure else retrieve these from viid and save them in port_info structure. Do the same for smt_idx from FW_VI_MAC_CMD Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4: Add thermal zone supportGanesh Goudar2018-10-091-0/+1
| | | | | | | Add thermal zone support to monitor ASIC's temperature. Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4: impose mandatory VLAN usage when non-zero TAG IDCasey Leedom2018-09-081-0/+1
| | | | | | | | | | | When a non-zero VLAN Tag ID is passed to t4_set_vlan_acl() then impose mandatory VLAN Usage with that VLAN ID. I.e any other VLAN ID should result in packets getting dropped. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4: specify IQTYPE in fw_iq_cmdArjun Vynipadath2018-07-121-0/+12
| | | | | | | | | congestion argument passed to t4_sge_alloc_rxq() is used to differentiate between nic/ofld queues. Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4: Add FORCE_PAUSE bit to 32 bit port capsGanesh Goudar2018-05-311-2/+3
| | | | | | | | | | Add FORCE_PAUSE bit to force local pause settings instead of using auto negotiated values. Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4: change the port capability bits definitionGanesh Goudar2018-05-231-4/+4
| | | | | | | | | | | | | MDI Port Capabilities bit definitions were inconsistent with regard to the MDI enum values. 2 bits used to define MDI in the port capabilities are not really separable, it's a 2-bit field with 4 different values. Change the port capability bit definitions to be "AUTO" and "STRAIGHT" in order to get them to line up with the enum's. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4: add tc flower match support for tunnel VNIKumar Sanghvi2018-05-151-0/+34
| | | | | | | | | | | Adds support for matching flows based on tunnel VNI value. Introduces fw APIs for allocating/removing MPS entries related to encapsulation. And uses the same while adding/deleting filters for offloading flows based on tunnel VNI match. Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4: Fix {vxlan/geneve}_port initializationArjun Vynipadath2018-05-111-0/+2
| | | | | | | | | | | | adapter->rawf_cnt was not initialized, thereby ndo_udp_tunnel_{add/del} was returning immediately without initializing {vxlan/geneve}_port. Also initializes mps_encap_entry refcnt. Fixes: 846eac3fccec ("cxgb4: implement udp tunnel callbacks") Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4: Inline TLS FW InterfaceAtul Gupta2018-04-011-4/+161
| | | | | | | | | Key area size in hw-config file. CPL struct for TLS request and response. Work request for Inline TLS. Signed-off-by: Atul Gupta <atul.gupta@chelsio.com> Reviewed-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4: Support firmware rdma write completion work request.Raju Rangoju2018-03-221-0/+2
| | | | | | | | | | | | If FW supports RDMA WRITE_COMPLETION functionality, then advertise that to the ULDs. This will be used by iw_cxgb4 to allow WRITE_COMPLETION work requests. Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com> Signed-off-by: Raju Rangoju <rajur@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4: Support firmware rdma write with immediate work request.Raju Rangoju2018-03-221-0/+1
| | | | | | | | | | | | | If FW supports RDMA WRITE_WITH_IMMEDATE functionality, then advertise that to the ULDs. This will be used by iw_cxgb4 to allow WRITE_WITH_IMMEDIATE work requests. Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com> Signed-off-by: Raju Rangoju <rajur@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4: Adds CPL support for Shared Receive QueuesRaju Rangoju2018-03-221-0/+2
| | | | | | | | | | | - Add srq table query cpl support for srq - Add cpl_abort_req_rss6 and cpl_abort_rpl_rss6 structs. - Add accessors, macros to get the SRQ IDX value. Signed-off-by: Raju Rangoju <rajur@chelsio.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4: Add HMA supportArjun Vynipadath2018-03-131-0/+56
| | | | | | | | | | | | | | | | HMA(Host Memory Access) maps a part of host memory for T6-SO memfree cards. This commit does the following: - Query FW to check if we have HMA support. If yes, the params will return HMA size configured in FW. We will dma map memory based on this size. - Also contains changes to get HMA memory information via debugfs. Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Michael Werner <werner@chelsio.com> Signed-off-by: Ganesh GR <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2018-01-311-4/+41
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking updates from David Miller: 1) Significantly shrink the core networking routing structures. Result of http://vger.kernel.org/~davem/seoul2017_netdev_keynote.pdf 2) Add netdevsim driver for testing various offloads, from Jakub Kicinski. 3) Support cross-chip FDB operations in DSA, from Vivien Didelot. 4) Add a 2nd listener hash table for TCP, similar to what was done for UDP. From Martin KaFai Lau. 5) Add eBPF based queue selection to tun, from Jason Wang. 6) Lockless qdisc support, from John Fastabend. 7) SCTP stream interleave support, from Xin Long. 8) Smoother TCP receive autotuning, from Eric Dumazet. 9) Lots of erspan tunneling enhancements, from William Tu. 10) Add true function call support to BPF, from Alexei Starovoitov. 11) Add explicit support for GRO HW offloading, from Michael Chan. 12) Support extack generation in more netlink subsystems. From Alexander Aring, Quentin Monnet, and Jakub Kicinski. 13) Add 1000BaseX, flow control, and EEE support to mvneta driver. From Russell King. 14) Add flow table abstraction to netfilter, from Pablo Neira Ayuso. 15) Many improvements and simplifications to the NFP driver bpf JIT, from Jakub Kicinski. 16) Support for ipv6 non-equal cost multipath routing, from Ido Schimmel. 17) Add resource abstration to devlink, from Arkadi Sharshevsky. 18) Packet scheduler classifier shared filter block support, from Jiri Pirko. 19) Avoid locking in act_csum, from Davide Caratti. 20) devinet_ioctl() simplifications from Al viro. 21) More TCP bpf improvements from Lawrence Brakmo. 22) Add support for onlink ipv6 route flag, similar to ipv4, from David Ahern. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1925 commits) tls: Add support for encryption using async offload accelerator ip6mr: fix stale iterator net/sched: kconfig: Remove blank help texts openvswitch: meter: Use 64-bit arithmetic instead of 32-bit tcp_nv: fix potential integer overflow in tcpnv_acked r8169: fix RTL8168EP take too long to complete driver initialization. qmi_wwan: Add support for Quectel EP06 rtnetlink: enable IFLA_IF_NETNSID for RTM_NEWLINK ipmr: Fix ptrdiff_t print formatting ibmvnic: Wait for device response when changing MAC qlcnic: fix deadlock bug tcp: release sk_frag.page in tcp_disconnect ipv4: Get the address of interface correctly. net_sched: gen_estimator: fix lockdep splat net: macb: Handle HRESP error net/mlx5e: IPoIB, Fix copy-paste bug in flow steering refactoring ipv6: addrconf: break critical section in addrconf_verify_rtnl() ipv6: change route cache aging logic i40e/i40evf: Update DESC_NEEDED value to reflect larger value bnxt_en: cleanup DIM work on device shutdown ...
| * cxgb4/cxgb4vf: add support for ndo_set_vf_vlanGanesh Goudar2018-01-241-4/+12
| | | | | | | | | | | | | | | | | | implement ndo_set_vf_vlan for mgmt netdevice to configure the PCIe VF. Original work by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * cxgb4: add data structures to support vxlanGanesh Goudar2018-01-111-0/+27
| | | | | | | | | | | | | | | | | | Add data structures and macros to be used in vxlan offload. Original work by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * cxgb4/cxgb4vf: support for XLAUI Port TypeGanesh Goudar2017-12-281-0/+1
| | | | | | | | | | | | | | | | Add support for new Backplane XLAUI port type. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * cxgb4: Add support for ethtool i2c dumpArjun Vynipadath2017-12-131-0/+1
| | | | | | | | | | | | | | | | | | | | Adds support for ethtool get_module_info() and get_module_eeprom() callbacks that will dump necessary information for a SFP. Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | cxgb4: Add support for Inline IPSec TxAtul Gupta2017-11-291-0/+7
|/ | | | | | | | | | | | | | Added Tx routine for ULD - define interface for ULD Tx. Export routines used for Tx data - Routines common for data transmit are used by cxgb4 and chcr drivers. - EXPORT routines enable transmit from chcr driver. Signed-off-by: Atul Gupta <atul.gupta@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* cxgb4: initialize hash-filter configurationKumar Sanghvi2017-11-011-0/+1
| | | | | | | | | | Add support for hash-filter configuration on T6. Also, do basic checks for the related initialization. Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4: collect TID info dumpRahul Lakkireddy2017-10-271-1/+4
| | | | | | Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4: introduce fw_filter2_wr to prepare for L3/L4 rewrite supportKumar Sanghvi2017-10-201-1/+74
| | | | | | | | | | | Update driver to use new fw_filter2_wr in order to support rewrite of L3/L4 header fields via filters. Query FW_PARAMS_PARAM_DEV_FILTER2_WR to check whether FW supports this new wr. Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4/cxgbvf: Handle 32-bit fw port capabilitiesGanesh Goudar2017-08-211-1/+174
| | | | | | | | | | | Implement new 32-bit Firmware Port Capabilities in order to handle new speeds which couldn't be represented in the old 16-bit Firmware Port Capabilities values. Based on the original work of Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4: display serial config and vpd versionsGanesh Goudar2017-07-211-0/+2
| | | | | | | | | print the versions of vpd and serial configuration file, flashed to adapter, and cleanup the relevant code. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4: time stamping interface for PTPAtul Gupta2017-07-051-0/+50
| | | | | | | | | | Supports hardware and software time stamping via the Linux SO_TIMESTAMPING socket option. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Atul Gupta <atul.gupta@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4: Use Firmware params to get buffer-group mapArjun Vynipadath2017-06-231-0/+1
| | | | | | | | | | | | Buffer group mappings can be obtained using FW_PARAMs cmd for newer FW. Since some of the bg_maps are obtained in atomic context, created another t4_query_params_ns(), that wont sleep when awaiting mbox cmd completion. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4: handle interrupt raised when FW crashesRahul Lakkireddy2017-06-091-0/+4
| | | | | | | | | | Handle TIMER0INT when FW crashes. Check for PCIE_FW[FW_EVAL] and if it says "Device FW Crashed", then treat it as fatal. Else, non-fatal. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4 : retrieve port information from firmwareGanesh Goudar2017-05-211-0/+1
| | | | | | | | | | | | | | issue get port information command to firmware to retrieve port information and update if it is different from what was last recorded and also add indication for supported link modes for firmware port types FW_PORT_TYPE_SFP28, FW_PORT_TYPE_KR_SFP28, FW_PORT_TYPE_CR4_QSFP. Based on the original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4: avoid disabling FEC by defaultGanesh Goudar2017-05-081-3/+3
| | | | | | | | | | | | Recent Chelsio firmware started using few port capablity bits to manage FEC and as driver was not aware of FEC changes those bits were zeroed, consequently disabling FEC. Avoid zeroing those bits and default to whatever the firmware tells us the Link is currently advertising. Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* crypto: chcr - Fix txq ids.Harsh Jain2017-04-211-1/+2
| | | | | | | | | | | The patch fixes a critical issue to map txqid with flows on the hardware appropriately, if tx queues created are more than flows configured then txqid shall map within the range of hardware flows configured. This ensure that un-mapped txqid does not remain un-handled. The patch also segregated the rxqid and txqid for clarity. Signed-off-by: Atul Gupta <atul.gupta@chelsio.com> Reviewed-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: chcr - Change flow IDsHarsh Jain2017-02-031-0/+8
| | | | | | | | | Change assign flowc id to each outgoing request.Firmware use flowc id to schedule each request onto HW. FW reply may miss without this change. Reviewed-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Atul Gupta <atul.gupta@chelsio.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* Merge tag 'for-linus' of ↵Linus Torvalds2016-10-101-0/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull main rdma updates from Doug Ledford: "This is the main pull request for the rdma stack this release. The code has been through 0day and I had it tagged for linux-next testing for a couple days. Summary: - updates to mlx5 - updates to mlx4 (two conflicts, both minor and easily resolved) - updates to iw_cxgb4 (one conflict, not so obvious to resolve, proper resolution is to keep the code in cxgb4_main.c as it is in Linus' tree as attach_uld was refactored and moved into cxgb4_uld.c) - improvements to uAPI (moved vendor specific API elements to uAPI area) - add hns-roce driver and hns and hns-roce ACPI reset support - conversion of all rdma code away from deprecated create_singlethread_workqueue - security improvement: remove unsafe ib_get_dma_mr (breaks lustre in staging)" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (75 commits) staging/lustre: Disable InfiniBand support iw_cxgb4: add fast-path for small REG_MR operations cxgb4: advertise support for FR_NSMR_TPTE_WR IB/core: correctly handle rdma_rw_init_mrs() failure IB/srp: Fix infinite loop when FMR sg[0].offset != 0 IB/srp: Remove an unused argument IB/core: Improve ib_map_mr_sg() documentation IB/mlx4: Fix possible vl/sl field mismatch in LRH header in QP1 packets IB/mthca: Move user vendor structures IB/nes: Move user vendor structures IB/ocrdma: Move user vendor structures IB/mlx4: Move user vendor structures IB/cxgb4: Move user vendor structures IB/cxgb3: Move user vendor structures IB/mlx5: Move and decouple user vendor structures IB/{core,hw}: Add constant for node_desc ipoib: Make ipoib_warn ratelimited IB/mlx4/alias_GUID: Remove deprecated create_singlethread_workqueue IB/ipoib_verbs: Remove deprecated create_singlethread_workqueue IB/ipoib: Remove deprecated create_singlethread_workqueue ...
| * iw_cxgb4: add fast-path for small REG_MR operationsSteve Wise2016-10-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When processing a REG_MR work request, if fw supports the FW_RI_NSMR_TPTE_WR work request, and if the page list for this registration is <= 2 pages, and the current state of the mr is INVALID, then use FW_RI_NSMR_TPTE_WR to pass down a fully populated TPTE for FW to write. This avoids FW having to do an async read of the TPTE blocking the SQ until the read completes. To know if the current MR state is INVALID or not, iw_cxgb4 must track the state of each fastreg MR. The c4iw_mr struct state is updated as REG_MR and LOCAL_INV WRs are posted and completed, when a reg_mr is destroyed, and when RECV completions are processed that include a local invalidation. This optimization increases small IO IOPS for both iSER and NVMF. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
| * cxgb4: advertise support for FR_NSMR_TPTE_WRSteve Wise2016-10-071-0/+1
| | | | | | | | | | | | | | | | | | Query firmware for the FW_PARAMS_PARAM_DEV_RI_FR_NSMR_TPTE_WR parameter. If it exists and is 1, then advertise support for FR_NSMR_TPTE_WR to the ULDs. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2016-09-231-0/+6
|\ \
| * | cxgb4/cxgb4vf: Allocate more queues for 25G and 100G adapterHariprasad Shenai2016-09-211-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We were missing check for 25G and 100G while checking port speed, which lead to less number of queues getting allocated for 25G & 100G adapters and leading to low throughput. Adding the missing check for both NIC and vNIC driver. Also fixes port advertisement for 25G and 100G in ethtool output. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | cxgb4: add support for tx traffic scheduling classesRahul Lakkireddy2016-08-231-1/+37
| |/ |/| | | | | | | | | | | | | | | | | Add support to create tx traffic scheduling classes with specified scheduling parameters. Return an existing class if a match is found with same scheduling parameters. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | cxgb4: Register changes and fw defines for cryptoHariprasad Shenai2016-08-191-0/+124
| | | | | | | | | | | | Signed-off-by: Atul Gupta <atul.gupta@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | cxgb4: Add support for dynamic allocation of resources for ULDHariprasad Shenai2016-08-191-1/+1
|/ | | | | | | | | | | Add a new commmon infrastructure to allocate reosurces dynamically to Upper layer driver's(ULD) when they register with cxgb4 driver and free them during unregistering. All the queues and the interrupts for them will be allocated during ULD probe only and freed during remove. Signed-off-by: Atul Gupta <atul.gupta@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4/cxgb4vf: Add link mode mask API to cxgb4 and cxgb4vfGanesh Goudar2016-07-251-9/+15
| | | | | | | Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4: Decode link down reason code obtained from firmwareHariprasad Shenai2016-04-261-0/+5
| | | | | Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4: add definitions for iSCSI target ULDVarun Prakash2016-03-221-0/+7
| | | | | | | | | add structure, macro and constant definitions for iSCSI Tx and Rx. Signed-off-by: Varun Prakash <varun@chelsio.com> Acked-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
* cxgb4: changes for new firmware 1.14.4.0Hariprasad Shenai2015-09-101-2/+31
| | | | | | | | Incorporate fw_ldst_cmd structure change for new firmware and also update version string for the same Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4: Add sge ec context flush serviceHariprasad Shenai2015-06-061-1/+5
| | | | | | | | Add function to flush the sge ec context cache, and utilize this new function in the driver Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4: Adds support for T6 adapterHariprasad Shenai2015-06-021-21/+35
| | | | | | | | | Adds NIC driver related changes for T6 adapter. Register related changes, MC related changes, VF related changes, doorbell related changes, debugfs changes, etc Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-06-25 20:49:26 +0200