summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/hisilicon
Commit message (Collapse)AuthorAgeFilesLines
* net: hns: bug fix about TSO on|off when there is trafficDaode Huang2016-06-211-4/+4
| | | | | | | | | | | When enable/disable tso, the driver tries to access the hardware register, but this operation will cause the port unavalible when there is traffic. This patch tries to enable TSO when initialize, then control tso through TSE bit in transmit descriptor. Signed-off-by: Daode Huang <huangdaode@hisilicon.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: hns: change the default coalesce usecsDaode Huang2016-06-212-2/+2
| | | | | | | | | | The default coalesce timeout is 3us, which is will cause CPU usage is too high. This patch change it to 50us in order to reduce CPU usage and the value makes sure network latency also meets requirement. Signed-off-by: Daode Huang <huangdaode@hisilicon.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: hns: fix sbm default parameters config errorDaode Huang2016-06-212-17/+39
| | | | | | | | | | The default sbm config parameter leaves little buffer when there is heavy traffic, which will cause packets drop. This patch changes them to make enough buffers for handling packets. Signed-off-by: Daode Huang <huangdaode@hisilicon.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: hns: fix bug that alloc skb fail lead to port unavailableJun He2016-06-211-2/+3
| | | | | | | | | | | | | | When hns_nic_poll_rx_skb alloc skb fail, it will break receive cycle and read new fbd_num to start new receive cycle. It recomputes cycle num is fbd_num minus clean_count, actually this cycle num is too big because it drop out receive cycle. It brings about the port unavailable. So we will goto out when alloc skb fail to fix this bug. Signed-off-by: Jun He <hjat2005@huawei.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: hns: bug fix about led control logic when link downDaode Huang2016-06-211-5/+7
| | | | | | | | | | | | | The default driver sets anchor led bit to 0 when link down, actually, the anchor bit should be set to 1, so fixes it when link status is down. Secondly, change the return value of cpld_set_led_id to 0, which means leave the cpld to control led blink frequece other than the driver itself. Signed-off-by: Daode Huang <huangdaode@hisilicon.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: hns: delete redundancy ring enable operationsDaode Huang2016-06-214-21/+10Star
| | | | | | | | | | | When network interface is enabled, the ring enable operation is conducted twice. This patch deletes the redundancy code of ring enable, and integrates hnae_ae_ops.toggle_queue_status other functions to hns_ae_start. Signed-off-by: Daode Huang <huangdaode@hisilicon.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: hns: add get_coalesce_range api for hnsDaode Huang2016-06-213-0/+40
| | | | | | | | | | This patch adds get_coalesce_range api for hns, it shows range of coalesce usecs and frames that can be set on this interface. Signed-off-by: Daode Huang <huangdaode@hisilicon.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: hns: fix bug of getting the wrong tcam dataDaode Huang2016-06-211-4/+4
| | | | | | | | | | The current driver stores the high bit value of tcam data register to the tcam data low element, stores the low bit value of tcam data register to tcam data high element, this patch fixes this bug. Signed-off-by: Daode Huang <huangdaode@hisilicon.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: hns: add spin lock for tcam table operationDaode Huang2016-06-212-0/+27
| | | | | | | | | | This patch adds spin lock for tcam table operation, there maybe a race condition happens when more than one thread try to change the tcam talbe entries. Signed-off-by: Daode Huang <huangdaode@hisilicon.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: hns: bugfix about pfc pause frame statisticsDaode Huang2016-06-214-12/+81
| | | | | | | | | | For SoC hip06, PFC pause handled in dsaf, while hip05 in XGMAC, so change the statistics of pfc pause in dsaf and remove the old pfc pause frame statistics. Signed-off-by: Daode Huang <huangdaode@hisilicon.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: hns: fix the wrong speed for bondQianqian Xie2016-06-212-20/+25
| | | | | | | | | | | | | | | For debug-ports,there are two non-synchronized processes: Speed-Auto-Negotiation and Link-Update-Status. The two processes are towed by two different state machines. Bond reads the speed when link up, but the speed maybe not update the right value at that time.That make for bond's wrong speed. Thus only one state machine should be used and if phy_state_machine is used, it does not need to do hns_nic_update_link_status(). Signed-off-by: Qianqian Xie <xieqianqian@huawei.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: hns: fix ethtool loopback fail bugKejian Yan2016-06-211-21/+14Star
| | | | | | | | | | | | | | | | | | When run ethtool cmd(ethtool -t ethx) again and again for a long time, it will be probabilistically fail. The PHYs' registers may be on different pages, so it must be switch to the right page before setting PHYs' registers. And __lb_up() calls phy_start() to startup the PHYs device, but this function may change Copper Control Register(Page 0, Register 0) to an other value. It would cause phy loopback test fail. if we remove phy_start(), we have to remove the relative phy_stop(), phy_disconnect() when doing phy loopback to keep the phy stay in right status. Reported-by: hejun <hjat2005@huawei.com> Signed-off-by: Kejian Yan <yankejian@huawei.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: hns: select Hilink before serdes loopback for HNS V2Kejian Yan2016-06-211-6/+20
| | | | | | | | | | As Hilink3 and Hilink4 use the same xge training and xge u adaptor for HNSv2, it needs to select which Hilink to be set before relative serdes being configed. The hilink_access_sel is the register to do that. Signed-off-by: Kejian Yan <yankejian@huawei.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: hns: fix the error info when dma_set_mask_and_coherent failQianqian Xie2016-06-211-1/+1
| | | | | | | | | The error info should be printed as "set mask to 64bit fail!" instead of "set mask to 32bit fail!" in dma_set_mask_and_coherent(). Signed-off-by: Qianqian Xie <xieqianqian@huawei.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: hns: Remove unnecessary device resource freeQianqian Xie2016-06-211-35/+4Star
| | | | | | | | | | The driver uses devm_ioremap_resource, it will unmap the map automatically, remove the unnecessary the resource free. Signed-off-by: Qianqian Xie <xieqianqian@huawei.com> Reported-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: hns: typo fix of annotation info for hns_nic_reset_subtask()Qianqian Xie2016-06-211-1/+1
| | | | | | | | | The annotation info for hns_nic_reset_subtask() should be "for resetting subtask" instead of "for resetting suntask". Signed-off-by: Qianqian Xie <xieqianqian@huawei.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: hns: add skb_reset_mac_header() after skb being allocKejian Yan2016-06-211-0/+1
| | | | | | | | | | | HNS receives a packet without doing anything, but it should call skb_reset_mac_header() to initialize the header before using eth_hdr(). Fixes: 0d6b425a3773c3445b0f51b2f333821beaacb619 Signed-off-by: Kejian Yan <yankejian@huawei.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: hns: fix hns dsaf v1 dont support tx_pause closeQianqian Xie2016-06-211-3/+3
| | | | | | | | | | For service port, hns dsaf v1 support to close tx_pause. However, the port will be invalid when it run command ethtool to close tx_pause. This patch will fix it. Signed-off-by: Qianqian Xie <xieqiaqian@huawei.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: hns: bug fix of ge reset sequenceQianqian Xie2016-06-211-1/+5
| | | | | | | | | | | The bit fileds of PPE reset register are different between HNS v1 and HNS v2, but the current procedure just only match HNS v1. Here is a patch to fix it. Signed-off-by: Kejian Yan <yankejian@huawei.com> Signed-off-by: Qianqian Xie <xieqianqian@huawei.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: hns: update the dependencyKejian Yan2016-06-151-1/+1
| | | | | | | | | | After the patchset about adding support of ACPI (commit id is 6343488) being applied, HNS does not depend on OF. It depends on OF or ACPI, so the Kconfig file needs to be updated. Signed-off-by: Kejian Yan <yankejian@huawei.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: hns: net: hns: enet adds support of acpiKejian Yan2016-06-051-12/+44
| | | | | | | | | | Enet needs to get configration parameter by acpi. This patch adds support of ACPI for enet. The configuration parameter will be configed in BIOS. Signed-off-by: Kejian Yan <yankejian@huawei.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: hns: implement the miscellaneous operation by aslKejian Yan2016-06-051-0/+167
| | | | | | | | | | The miscellaneous operation is implemented in BIOS, the kernel can call _DSM method help to call the implementation in ACPI case. Here is a patch to do that. Signed-off-by: Kejian Yan <yankejian@huawei.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: hns: register phy device in each mac initial sequenceKejian Yan2016-06-051-7/+126
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In ACPI case, there is no interface to register phy device to mdio-bus. Phy device has to be registered itself to mdio-bus, and then enet can get the phy device's info so that it can config the phy-device to help to trasmit and receive data. HNS hardware topology is as below. The MDIO controller may control several PHY-devices, and each PHY-device connects to a MAC device. PHY-devices will register when each mac find PHY device in initial sequence. cpu | | ------------------------------------------- | | | | | | | dsaf | MDIO | MDIO | --------------------------- | | | | | | | | | | | | | | MAC MAC MAC MAC | | | | | | | ---- |-------- |-------- | | -------- || || || || PHY PHY PHY PHY Signed-off-by: Kejian Yan <yankejian@huawei.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: hns: dsaf adds support of acpiKejian Yan2016-06-053-83/+114
| | | | | | | | | Dsaf needs to get configuration parameter by ACPI, so this patch add support of ACPI. Signed-off-by: Kejian Yan <yankejian@huawei.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: hns: add dsaf misc operation methodKejian Yan2016-06-0510-70/+111
| | | | | | | | | | The misc operation for different hw platform may be different, if using current implementation, it will add a new branch on each function for every new hw platform, so we add a method for this operation. Signed-off-by: Kejian Yan <yankejian@huawei.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: hns: add uniform interface for phy connectionKejian Yan2016-06-058-25/+49
| | | | | | | | | | | | As device_node is only used by DT case, HNS needs to treat the other cases including ACPI. It needs to use uniform ways to handle both of DT and ACPI. This patch chooses phy_device, and of_phy_connect and of_phy_attach are only used by DT case. It needs to use uniform interface to handle that sequence by both DT and ACPI. Signed-off-by: Kejian Yan <yankejian@huawei.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: hns: enet specify a reference to dsaf by fwnode_handleKejian Yan2016-06-054-14/+16
| | | | | | | | | As device_node is only used by DT case, it is expected to find uniform ways. So fwnode_handle is the suitable method. Signed-off-by: Kejian Yan <yankejian@huawei.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: hns: use platform_get_irq instead of irq_of_parse_and_mapKejian Yan2016-06-051-3/+2Star
| | | | | | | | | As irq_of_parse_and_map is only used by DT case, it is excepted to use a uniform interface. So it is used platform_get_irq() instead. Signed-off-by: Kejian Yan <yankejian@huawei.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: hns: use device_* APIs instead of of_* APIsKejian Yan2016-06-052-12/+8Star
| | | | | | | | | OF series functions can be used only for DT case. Use unified device property function instead to support both DT and ACPI. Signed-off-by: Kejian Yan <yankejian@huawei.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: hisilicon: add support of acpi for hns-mdioKejian Yan2016-06-051-37/+69
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | hns-mdio needs to register itself to mii-bus. The info of the device can be read by both DT and ACPI. HNS tries to call Linux PHY driver to help access PHY-devices, the HNS hardware topology is as below. The MDIO controller may control several PHY-devices, and each PHY-device connects to a MAC device. The MDIO will be registered to mdiobus, then PHY-devices will register when each mac find PHY device. cpu | | ------------------------------------------- | | | | | | | dsaf | MDIO | MDIO | --------------------------- | | | | | | | | | | | | | | MAC MAC MAC MAC | | | | | | | ---- |-------- |-------- | | -------- || || || || PHY PHY PHY PHY And the driver can handle reset sequence by _RST method in DSDT in ACPI case. Signed-off-by: Kejian Yan <yankejian@huawei.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: hisilicon: cleanup to prepare for other casesKejian Yan2016-06-051-30/+18Star
| | | | | | | | | Hns-mdio only supports DT case now. do some cleanup to prepare for introducing other cases later, no functional change. Signed-off-by: Kejian Yan <yankejian@huawei.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: hns: avoid null pointer dereferencexypron.glpk@gmx.de2016-05-231-11/+0Star
| | | | | | | | | | | | | In the statement assert(priv || priv->ae_handle); the right side of || is only evaluated if priv is null. v2: As suggested by David Leight and David Miller the assert statements are removed. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* treewide: replace dev->trans_start update with helperFlorian Westphal2016-05-042-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace all trans_start updates with netif_trans_update helper. change was done via spatch: struct net_device *d; @@ - d->trans_start = jiffies + netif_trans_update(d) Compile tested only. Cc: user-mode-linux-devel@lists.sourceforge.net Cc: linux-xtensa@linux-xtensa.org Cc: linux1394-devel@lists.sourceforge.net Cc: linux-rdma@vger.kernel.org Cc: netdev@vger.kernel.org Cc: MPT-FusionLinux.pdl@broadcom.com Cc: linux-scsi@vger.kernel.org Cc: linux-can@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-hams@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: b.a.t.m.a.n@lists.open-mesh.org Cc: linux-bluetooth@vger.kernel.org Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: hns: change port-id property to reg property in dsaf port nodeYisen.Zhuang\(Zhuangyuzeng\)2016-04-291-3/+3
| | | | | | | | Indexes should generally be avoided. So we use reg rather than port-id to index ports. Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: hns: remove cpld-ctrl-reg and add cell in the cpld-syscon propertyYisen.Zhuang\(Zhuangyuzeng\)2016-04-291-12/+14
| | | | | | | | Because cpld-ctrl-reg property is offset base on cpld-syscon property, we make it as a cell in the cpld-syscon property. Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: hns: add attribute port-mode-offset for dsaf port nodeYisen.Zhuang\(Zhuangyuzeng\)2016-04-263-25/+30
| | | | | | | | | | | Port mode offset for each dsaf port is different. The current code is not so readability. This patch adds configuration named port-mode-offset to make the code simple and more readability. If port-mode-offset isn't exists, default value 0 will be used. Signed-off-by: Daode Huang <huangdaode@hisilicon.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: hns: add attribute port-rst-offset for dsaf port nodeYisen.Zhuang\(Zhuangyuzeng\)2016-04-263-17/+19
| | | | | | | | | | The reset offset for each port in a dsaf is different. The current code is not so readability. This patch adds configuration named port-rst-offset to make the code simple and more readability. If this attribute doesn't exist, default value of this attribute is equal to its port index. Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: hns: add attribute cpld_ctrl for dsaf port nodeYisen.Zhuang\(Zhuangyuzeng\)2016-04-266-34/+51
| | | | | | | | | | This patch adds attribute cpld_ctrl for dsaf port node, parses the syscon for mac_cb from dts, and changes the method of access the cpld related registers through syscon. Signed-off-by: Daode Huang <huangdaode@hisilicon.com> Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: hns: separate debug dsaf device from service dsaf deviceYisen.Zhuang\(Zhuangyuzeng\)2016-04-2610-241/+261
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are two kinds of dsaf device in hns, one is for service ports, contains crossbar in it, can work under different mode. Another is for debug port, only can work under "single-port" mode. The current code only declared a dsaf device for both service ports and debug ports. This patch separate it to three platform devices. Here is the diagram of all port in one platform device(old): CPU | | DSAF(one platform device) -------------------------------------------------------------- / | | | | | / | PPE PPE PPE | / | | | | | / | | | | | / | crossbar | | | / | | | | |/ | ----------------------------------- | | | | | | | | | | | | | | | | | | | | | | | | MAC MAC MAC MAC MAC MAC MAC MAC | | | | | | | | | | | -------------------------------------------------------------- | | | | | | | | PHY PHY PHY PHY PHY PHY PHY PHY Here is the diagram of separate all ports to three platform(new): CPU | ----------------------------------- | | | ---------------------------------------------- --------- --------- | | | | | | | | | PPE | | PPE | | PPE | | | | | | | | | | | | | | | | | | | | crossbar | | | | | | | | | | | | | | | | | ---------------------------------- | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MAC MAC MAC MAC MAC MAC | | MAC | | MAC | | | | | | | | | | | | | | | ---------------------------------------------- --------- --------- | | | | | | \ / | / | PHY PHY PHY PHY PHY PHY \ / PHY / PHY \ / / \ / / DSAF(three platform device) Signed-off-by: Daode Huang <huangdaode@hisilicon.com> Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: hns: sort the header file by alphabetical orderDaode Huang2016-04-263-14/+14
| | | | | | | | This patch tunes the header file by the alphabetical order. Signed-off-by: Daode Huang <huangdaode@hisilicon.com> Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: hns: add syscon operation for dsafYisen.Zhuang\(Zhuangyuzeng\)2016-04-261-0/+14
| | | | | | | | | This patch provides the read/write function for dsaf to access the registers through syscon methods. Signed-off-by: Daode Huang <huangdaode@hisilicon.com> Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: hns: add attribute reset-field-offset for dsaf nodeYisen.Zhuang\(Zhuangyuzeng\)2016-04-263-12/+37
| | | | | | | | | | Add the subctrl reset offset for dsaf, this property is used to reset xge/ge ports for different dsaf. If this attribute is not present, default value 0 will be used. Signed-off-by: Daode Huang <huangdaode@hisilicon.com> Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: hns: add attribute port-idx-in-ae in enet node.Yisen.Zhuang\(Zhuangyuzeng\)2016-04-264-32/+22Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch parse port-idx-in-ae in enet node. In NIC mode of DSAF, all 6 PHYs of service DSAF are taken as ethernet ports to the CPU. The port-idx-in-ae can be 0 to 5. Here is the diagram: +-----+---------------+ | CPU | +-+-+-+---+-+-+-+-+-+-+ | | | | | | | | debug debug service port port port (0) (0) (0-5) In Switch mode of DSAF, all 6 PHYs of service DSAF are taken as physical ports connect to a LAN Switch while the CPU side assume itself have one single NIC connect to this switch. In this case, the port-idx-in-ae will be 0 only. +-----+-----+------+------+ | CPU | +-+-+-+-+-+-+-+-+-+-+-+-+-+ | | service| port(0) debug debug +------------+ port port | switch | (0) (0) +-+-+-+-+-+-++ | | | | | | external port when port-idx-in-ae is not exists, old attribute port-id will be used (only for compatible purpose, not recommended to use port-id in new code). Signed-off-by: Daode Huang <huangdaode@hisilicon.com> Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: hns: set debug port irq index to 0Daode Huang2016-04-262-11/+2Star
| | | | | | | | | | As debug ports are moved from service dsaf to debug dsaf, the interrupts offset should start from 0, So this patch re-defines the offset index of debug ports. Signed-off-by: Daode Huang <huangdaode@hisilicon.com> Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: hns: add a new dsaf mode for debug portYisen.Zhuang\(Zhuangyuzeng\)2016-04-269-89/+84Star
| | | | | | | | | | This patch adds a new dsaf mode named "single-port" mode for debug port. This mode only contains one debug port. This patch also changes the method of distinguishing the port type. Signed-off-by: Daode Huang <huangdaode@hisilicon.com> Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: hns: add support of pause frame ctrl for HNS V2Lisheng2016-04-036-38/+104
| | | | | | | | | | | | | | | The patch adds support of pause ctrl for HNS V2, and this feature is lost by HNS V1: 1) service ports can disable rx pause frame, 2) debug ports can open tx/rx pause frame. And this patch updates the REGs about the pause ctrl when updated status function called by upper layer routine. Signed-off-by: Lisheng <lisheng011@huawei.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2016-04-0210-195/+174Star
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David Miller: 1) Missing device reference in IPSEC input path results in crashes during device unregistration. From Subash Abhinov Kasiviswanathan. 2) Per-queue ISR register writes not being done properly in macb driver, from Cyrille Pitchen. 3) Stats accounting bugs in bcmgenet, from Patri Gynther. 4) Lightweight tunnel's TTL and TOS were swapped in netlink dumps, from Quentin Armitage. 5) SXGBE driver has off-by-one in probe error paths, from Rasmus Villemoes. 6) Fix race in save/swap/delete options in netfilter ipset, from Vishwanath Pai. 7) Ageing time of bridge not set properly when not operating over a switchdev device. Fix from Haishuang Yan. 8) Fix GRO regression wrt nested FOU/GUE based tunnels, from Alexander Duyck. 9) IPV6 UDP code bumps wrong stats, from Eric Dumazet. 10) FEC driver should only access registers that actually exist on the given chipset, fix from Fabio Estevam. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (73 commits) net: mvneta: fix changing MTU when using per-cpu processing stmmac: fix MDIO settings Revert "stmmac: Fix 'eth0: No PHY found' regression" stmmac: fix TX normal DESC net: mvneta: use cache_line_size() to get cacheline size net: mvpp2: use cache_line_size() to get cacheline size net: mvpp2: fix maybe-uninitialized warning tun, bpf: fix suspicious RCU usage in tun_{attach, detach}_filter net: usb: cdc_ncm: adding Telit LE910 V2 mobile broadband card rtnl: fix msg size calculation in if_nlmsg_size() fec: Do not access unexisting register in Coldfire net: mvneta: replace MVNETA_CPU_D_CACHE_LINE_SIZE with L1_CACHE_BYTES net: mvpp2: replace MVPP2_CPU_D_CACHE_LINE_SIZE with L1_CACHE_BYTES net: dsa: mv88e6xxx: Clear the PDOWN bit on setup net: dsa: mv88e6xxx: Introduce _mv88e6xxx_phy_page_{read, write} bpf: make padding in bpf_tunnel_key explicit ipv6: udp: fix UDP_MIB_IGNOREDMULTI updates bnxt_en: Fix ethtool -a reporting. bnxt_en: Fix typo in bnxt_hwrm_set_pause_common(). bnxt_en: Implement proper firmware message padding. ...
| * net: hns: set-coalesce-usecs returns errno by dsaf.koLisheng2016-03-283-6/+8
| | | | | | | | | | | | | | | | | | | | It may fail to set coalesce usecs to HW, and Ethtool needs to know if it is successful to cfg the parameter or not. So it needs return the errno by dsaf.ko. Signed-off-by: Lisheng <lisheng011@huawei.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: hns: fixed the setting and getting overtime bugLisheng2016-03-284-154/+126Star
| | | | | | | | | | | | | | | | | | The overtime setting and getting REGs in HNS V2 is defferent from HNS V1. It needs to be distinguished between them if getting or setting the REGs. Signed-off-by: Lisheng <lisheng011@huawei.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: hns: bug fix about getting hilink status for HNS v2Sheng Li2016-03-242-18/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The hilink status reg in HNS V2 is different from HNS v1. In HNS V2, It distinguishes differnt lane status according to the bit-field of the reg. As is shown below: [0:0] ---> lane0 [1:1] ---> lane1 ... But the current driver reads the reg to get the hilink status ONLY concidering HNS V1 situation. Here is a patch to support both of them. Signed-off-by: Sheng Li <lisheng011@huawei.com> Signed-off-by: Daode Huang <huangdaode@hisilicon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-13 07:07:39 +0200