summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/mellanox
Commit message (Collapse)AuthorAgeFilesLines
* net/mlx5e: Add HW timestamping (TS) supportEran Ben Elisha2016-01-057-2/+279
| | | | | | | | | | | | | | | | | | Add support for enable/disable HW timestamping for incoming and/or outgoing packets. To enable/disable HW timestamping appropriate ioctl should be used. Currently HWTSTAMP_FILTER_ALL/NONE and HWTSAMP_TX_ON/OFF only are supported. Make all relevant changes in RX/TX flows to consider TS request and plant HW timestamps into relevant structures. Add internal clock for converting hardware timestamp to nanoseconds. In addition, add a service task to catch internal clock overflow, to make sure timestamping is accurate. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx5_core: Introduce access function to read internal timerEran Ben Elisha2016-01-052-0/+14
| | | | | | | | | | A preparation step which adds support for reading the hardware internal timer and the hardware timestamping from the CQE. In addition, advertize device_frequency_khz HCA capability. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx5e: Do not modify the TX SKBAchiad Shochat2016-01-053-34/+49
| | | | | | | | | If the SKB is cloned, or has an elevated users count, someone else can be looking at it at the same time. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlxsw: spectrum: Change bridge port attributes only when bridgedIdo Schimmel2016-01-052-6/+14
| | | | | | | | | | | | | Bridge port attributes are offloaded to hardware when invoked with SELF flag set, but it really makes no sense to reflect them when port is not bridged. Allow a user to change these attribute only when port is bridged and initialize them correctly when joining or leaving a bridge. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlxsw: spectrum: Set bridge status in appropriate functionsIdo Schimmel2016-01-051-10/+5Star
| | | | | | | | | | | | Set the bridge status of physical ports in the appropriate functions, to be consistent with LAG join/leave and vPorts joining/leaving bridge. Also, remove the error messages in these two functions, as we already emit errors in both the single functions they call. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlxsw: spectrum: Return NOTIFY_BAD on bridge failureIdo Schimmel2016-01-051-3/+7
| | | | | | | | | | It is possible for us to fail when joining or leaving a bridge, so let the user know about that by returning NOTIFY_BAD, as already done for LAG join/leave and 802.1D bridges. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlxsw: spectrum: Initialize PVID only onceIdo Schimmel2016-01-051-1/+0Star
| | | | | | | | | We set PVID to 1 in mlxsw_sp_port_vlan_init(), so we can remove this statement. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2016-01-013-9/+15
|\
| * net/mlx4_en: Fix HW timestamp init issue upon system startupEugenia Emantayev2015-12-183-7/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | mlx4_en_init_timestamp was called before creation of netdev and port init, thus used uninitialized values. Specifically - NIC frequency was incorrect causing wrong calculations and later wrong HW timestamps. Fixes: 1ec4864b1017 ('net/mlx4_en: Fixed crash when port type is changed') Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Marina Varshaver <marinav@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net/mlx4_en: Remove dependency between timestamping capability and service_taskEugenia Emantayev2015-12-181-3/+2Star
| | | | | | | | | | | | | | | | | | | | | | Service task is responsible for other tasks in addition to timestamping overflow check. Launch it even if timestamping is not supported by device. Fixes: 07841f9d94c1 ('net/mlx4_en: Schedule napi when RX buffers allocation fails') Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | mlxsw: core: Use devm_kzalloc to allocate mlxsw_hwmon structureJiri Pirko2015-12-223-13/+2Star
| | | | | | | | | | | | | | | | | | | | | | KASan reported use-after-free for the hwmon structure. So fix this by using devm_kzalloc and let the core take care about freeing the memory during device dettach. Reported-by: Ido Schimmel <idosch@mellanox.com> Fixes: 89309da39 ("mlxsw: core: Implement temperature hwmon interface") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | mlxsw: core: Allow to reset temperature history via hwmon interfaceJiri Pirko2015-12-221-1/+36
| | | | | | | | | | | | | | | | Add another sysfs hwmon attribute to expose possibility to reset temperature sensors history. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-12-182-3/+4
|\| | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/geneve.c Here we had an overlapping change, where in 'net' the extraneous stats bump was being removed whilst in 'net-next' the final argument to udp_tunnel6_xmit_skb() was being changed. Signed-off-by: David S. Miller <davem@davemloft.net>
| * Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2015-12-171-2/+3
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David Miller: 1) Fix uninitialized variable warnings in nfnetlink_queue, a lot of people reported this... From Arnd Bergmann. 2) Don't init mutex twice in i40e driver, from Jesse Brandeburg. 3) Fix spurious EBUSY in rhashtable, from Herbert Xu. 4) Missing DMA unmaps in mvpp2 driver, from Marcin Wojtas. 5) Fix race with work structure access in pppoe driver causing corruptions, from Guillaume Nault. 6) Fix OOPS due to sh_eth_rx() not checking whether netdev_alloc_skb() actually succeeded or not, from Sergei Shtylyov. 7) Don't lose flags when settifn IFA_F_OPTIMISTIC in ipv6 code, from Bjørn Mork. 8) VXLAN_HD_RCO defined incorrectly, fix from Jiri Benc. 9) Fix clock source used for cookies in SCTP, from Marcelo Ricardo Leitner. 10) aurora driver needs HAS_DMA dependency, from Geert Uytterhoeven. 11) ndo_fill_metadata_dst op of vxlan has to handle ipv6 tunneling properly as well, from Jiri Benc. 12) Handle request sockets properly in xfrm layer, from Eric Dumazet. 13) Double stats update in ipv6 geneve transmit path, fix from Pravin B Shelar. 14) sk->sk_policy[] needs RCU protection, and as a result xfrm_policy_destroy() needs to free policies using an RCU grace period, from Eric Dumazet. 15) SCTP needs to clone ipv6 tx options in order to avoid use after free, from Eric Dumazet. 16) Missing kbuild export if ila.h, from Stephen Hemminger. 17) Missing mdiobus_alloc() return value checking in mdio-mux.c, from Tobias Klauser. 18) Validate protocol value range in ->create() methods, from Hannes Frederic Sowa. 19) Fix early socket demux races that result in illegal dst reuse, from Eric Dumazet. 20) Validate socket address length in pptp code, from WANG Cong. 21) skb_reorder_vlan_header() uses incorrect offset and can corrupt packets, from Vlad Yasevich. 22) Fix memory leaks in nl80211 registry code, from Ola Olsson. 23) Timeout loop count handing fixes in mISDN, xgbe, qlge, sfc, and qlcnic. From Dan Carpenter. 24) msg.msg_iocb needs to be cleared in recvfrom() otherwise, for example, AF_ALG will interpret it as an async call. From Tadeusz Struk. 25) inetpeer_set_addr_v4 forgets to initialize the 'vif' field, from Eric Dumazet. 26) rhashtable enforces the minimum table size not early enough, breaking how we calculate the per-cpu lock allocations. From Herbert Xu. 27) Fix FCC port lockup in 82xx driver, from Martin Roth. 28) FOU sockets need to be freed using RCU, from Hannes Frederic Sowa. 29) Fix out-of-bounds access in __skb_complete_tx_timestamp() and sock_setsockopt() wrt. timestamp handling. From WANG Cong. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (117 commits) net: check both type and procotol for tcp sockets drivers: net: xgene: fix Tx flow control tcp: restore fastopen with no data in SYN packet af_unix: Revert 'lock_interruptible' in stream receive code fou: clean up socket with kfree_rcu 82xx: FCC: Fixing a bug causing to FCC port lock-up gianfar: Don't enable RX Filer if not supported net: fix warnings in 'make htmldocs' by moving macro definition out of field declaration rhashtable: Fix walker list corruption rhashtable: Enforce minimum size on initial hash table inet: tcp: fix inetpeer_set_addr_v4() ipv6: automatically enable stable privacy mode if stable_secret set net: fix uninitialized variable issue bluetooth: Validate socket address length in sco_sock_bind(). net_sched: make qdisc_tree_decrease_qlen() work for non mq ser_gigaset: remove unnecessary kfree() calls from release method ser_gigaset: fix deallocation of platform device structure ser_gigaset: turn nonsense checks into WARN_ON ser_gigaset: fix up NULL checks qlcnic: fix a timeout loop ...
| | * net/mlx4_core: fix handling return value of mlx4_slave_convert_portAndrzej Hajda2015-12-151-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The function can return negative values, so its result should be assigned to signed variable. The problem has been detected using proposed semantic patch scripts/coccinelle/tests/assign_signed_to_unsigned.cocci [1]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2046107 Fixes: fc48866f7 ('net/mlx4: Adapt code for N-Port VF') Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | IB/mlx4: Use correct order of variables in log messageWengang Wang2015-12-081-1/+1
| |/ | | | | | | | | | | | | | | There is a mis-order in mlx4 log. Fix it. Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* | mlxsw: spectrum: Add support for VLAN devices on top of LAGIdo Schimmel2015-12-151-3/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When creating a VLAN device on top of LAG, we are basically creating a vPort on top of each of the port netdevs member in the LAG. Therefore, these vPorts should inherit both the LAG status and LAG ID from the underlying port netdevs. In addition, when the VLAN device joins or leaves a bridge each of the underlying vPorts should know about it and act accordingly. This is achieved by propagating the VLAN event down to the lower devices. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | mlxsw: spectrum: Enable FDB records for VLAN devices on top of LAGIdo Schimmel2015-12-151-7/+14
| | | | | | | | | | | | | | | | | | | | When adding or removing FDB records of VLAN devices on top of LAG we should set the lag_vid parameter to the VLAN ID of the VLAN device. It is reserved otherwise. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | mlxsw: reg: Add lag_vid field to SFD registerIdo Schimmel2015-12-152-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | Unicast LAG records in the Switch Filtering Database (SFD) register have a lag_vid field indicating the VLAN ID in case of vFIDs. This field is no longer reserved since we are going to add support for VLAN devices on top of LAG. Add the lag_vid field to be used by VLAN devies on top of LAG. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | mlxsw: spectrum: Add support for VLAN devices bridgingIdo Schimmel2015-12-153-1/+378
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All the member VLAN devices in a bridge need to share the same vFID. To achieve that, expand the vFID struct to include the associated bridge device (or lack of) and allow one to lookup a vFID based on a bridge device. When joining a bridge, lookup the relevant vFID or create one if none exists. Next, make the VLAN device use the vFID. Leaving a bridge can either occur because a user removed the VLAN device from a bridge or because the VLAN device was deleted by the user. In the latter case the bridge's teardown sequence is invoked after the hardware vPort is already gone. Therefore, when unlinking the VLAN device from the real device, check if the associated vPort is bridged and act accordingly. The bridge's notification will be ignored in this case. Note that bridging a VLAN interface with an ordinary port netdev is currently not supported, but not forbidden. This will be addressed in a follow-up patchset. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | mlxsw: spectrum: Handle VLAN devices linking / unlinkingIdo Schimmel2015-12-151-3/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | When a VLAN interface is configured on top of a physical port we should associate the VLAN device with the matching vPort. Likewise, when it's removed, we should revert back to the underlying port netdev. While not a must, this is consistent with port netdevs and also provides a more accurate error printing via netdev_err() and friends. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | mlxsw: spectrum: Adjust FDB notifications for VLAN devicesIdo Schimmel2015-12-152-4/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | FDB notifications contain the FID and port (or LAG ID) on which the MAC was learned. In the case of the 802.1Q bridge one can easily derive the matching VID - as FID equals VID - and generate the appropriate notification for the software bridge. With VLAN devices this is no longer the case, as these are associated with a vFID. Solve that by converting the FID to a vFID and lookup the matching VLAN device. From that derive the VID and whether learning (and learning sync) should occur. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | mlxsw: spectrum: Adjust switchdev ops for VLAN devicesIdo Schimmel2015-12-152-4/+98
| | | | | | | | | | | | | | | | | | | | | | | | | | switchdev ops can now be called for VLAN devices and we need to be prepared for it. Until now they were only called for the port netdev. Use the newly propagated orig_dev passed as part of the switchdev attr/obj and determine whether the original device is a VLAN device. If so, act accordingly, otherwise continue as usual. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | mlxsw: spectrum: Use FID instead of VID when accessing FDBIdo Schimmel2015-12-152-28/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | In the Spectrum ASIC - unlike SwitchX-2 - FDB access is done by specifying FID as parameter and not VID. Change the relevant variables and parameters names to reflect that. Note that this was OK up until now, since FID was always equal to VID, but with the introduction of VLAN interfaces this is no longer the case. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | mlxsw: spectrum: Add another flood table for vFIDsIdo Schimmel2015-12-153-27/+16Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | We previously used only one flood table for packets classified to vFIDs. However, since we are going to add support for bridges between VLAN interfaces (mapped to vFIDs) we need to add one more flood table. That way we can separate the flooding domain of unknown unicast traffic from all the rest and support flood control (as we do with the 802.1Q bridge). Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | mlxsw: spectrum: Use appropriate parameter nameIdo Schimmel2015-12-151-4/+4
| | | | | | | | | | | | | | | | | | | | The __mlxsw_sp_port_flood_set function is now used to configure flooding for both FIDs and vFIDs, so change the parameter name to 'idx' instead of 'fid'. This is also consistent with hardware documentation. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | mlxsw: spectrum: Split vFID range in twoIdo Schimmel2015-12-153-99/+287
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Up until now we used a 1:1 mapping - based on VID - to map a VLAN interface to a vFID. However, a different scheme is needed in order to support bridges between VLAN interfaces, as all the member interfaces - which can have different VIDs - need to share the same vFID. Solve that by splitting the vFID range in two: 1. Non-bridged VLAN interfaces 2. Bridged VLAN interfaces When a VLAN interface is created, assign it the next available vFID in the first range, unless one already exists for that VID or number of vFIDs in the range was exceeded. When interface is removed, free the vFID, unless other interfaces are mapped to it. To accomplish the above: 1. Store the VID to vFID mapping in a new struct (mlxsw_sp_vfid), which has a global context and holds a reference count. 2. Create a vPort (dummy in case of bridge SELF invocation) on top of of the physical port and hold a reference to the associated vFID. vfid vfid +-------------+ +-------------+ | vfid | | vfid | | vid +---> ... | vid | | nr_vports | | nr_vports | +------+------+ +------+------+ | +-----------------------+-------+ | | vport vport +-------------+ +-------------+ | ... | | ... | | *vfid +---> ... | *vfid +---> ... | ... | | ... | +------+------+ +------+------+ | | port port +-------------+ +-------------+ | ... | | ... | | vports_list | | vports_list | | ... | | ... | +-------------+ +-------------+ swXpY swXpZ Next patches in the series will add the missing infrastructure for the second range and transfer vPorts between the two ranges according to the received notifications. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | mlxsw: spectrum: Allocate active VLANs only for port netdevsIdo Schimmel2015-12-152-1/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When adding support for bridges between VLAN interfaces, we'll introduce a new entity called a vPort, which is a represntation of the VLAN interface in the hardware. The main difference between a vPort and a physical port is that several FIDs can be bound to the latter, whereas only one (called a vFID) can be bound to the first. Therefore, it makes sense to use the same struct to represent the two, but to only allocate the 'active_vlans' bitmap in case of a physical port. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | mlxsw: core: Fix temperature sensor index during initializationJiri Pirko2015-12-121-1/+1
| | | | | | | | | | | | | | | | | | | | Sensor index should be passed instead of 0. For now, this does not make a difference, since there is so far only one temperature sensor exposed by HW. Fixes: 89309da39 ("mlxsw: core: Implement temperature hwmon interface") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | mlxsw: reg: Fix max temperature gettingJiri Pirko2015-12-121-1/+1
| | | | | | | | | | | | | | | | Fix copy & paste error in MTPM unpack helper. Fixes: 85926f877040 ("mlxsw: reg: Add definition of temperature management registers") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/mlx5e: Rename en_flow_table.c to en_fs.cMaor Gottlieb2015-12-122-1/+1
| | | | | | | | | | | | | | | | | | | | | | Rename en_flow_table.c to en_fs.c in order to be aligned with the new flow steering files. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/mlx5: Use flow steering infrastructure for mlx5_enMaor Gottlieb2015-12-129-1019/+595Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Expose the new flow steering API and remove the old one. Few changes are required: 1. The Ethernet flow steering follows the existing implementation, but uses the new steering API. The old flow steering implementation is removed. 2. Move the E-switch FDB management to use the new API. 3. When driver is loaded call to mlx5_init_fs which initialize the flow steering tree structure, open namespaces for NIC receive and for E-switch FDB. 4. Call to mlx5_cleanup_fs when the driver is unloaded. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/mlx5_core: Flow steering tree initializationMaor Gottlieb2015-12-122-0/+378
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Flow steering initialization is based on static tree which illustrates the flow steering tree when the driver is loaded. The initialization considers the max supported flow table level of the device, a minimum of 2 kernel flow tables(vlan and mac) are required to have kernel flow table functionality. The tree structures when the driver is loaded: root_namespace(receive nic) | priority-0 (kernel priority) | namespace(kernel namespace) | priority-0 (flow tables priority) In the following patches, When the EN driver will use the flow steering API, it create two flow tables and their flow groups under priority-0(flow tables priority). Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/mlx5_core: Introduce flow steering APIMaor Gottlieb2015-12-122-0/+487
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introducing the following objects: mlx5_flow_root_namespace: represent the root of specific flow table type tree(e.g NIC receive, FDB, etc..) mlx5_flow_group: define the mask of the flow specification. fs_fte(flow steering flow table entry): defines the value of the flow specification. The following describes the relationships between the tree objects: root_namespace --> priorities -->namespaces --> priorities -->flow-tables --> flow-groups --> flow-entries --> destinations When we create new object(flow table/flow group/flow table entry), we call to the FW command and then we add the related sw object to the tree. When we destroy object, e.g. call to mlx5_destroy_flow_table, we use the tree node destructor for destroying the FW object and remove the node from the tree. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/mlx5_core: Add flow steering lookup algorithmsMaor Gottlieb2015-12-122-0/+134
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce the flow steering mlx5_flow_namespace (Namespace) and fs_prio (Flow Steering Priority) tree nodes. Namespaces are used in order to isolate different usages or types of steering (for example, downstream patches will add a different namespaces for the NIC driver and for E-Switch FDB usages). Flow Steering Priorities are objects that describes priorities ranges between different flow objects under the same namespace. Example, entries in priority i are matched before entries in priority i+1. This patch adds the following algorithms: 1) Calculate level: Each flow table has level(the priority between the flow tables). When we initialize the flow steering tree, we assign range of levels to each priority, therefore the level for new flow table is the location within the priority related to the range of the priority. 2) Match between match criteria. This function is used for searching flow group when new flow rule is added. 3) Match between match values. This function is used for searching flow table entry when new flow rule is added. 4) Add essential macros for traversing on a node's children. E.g. traversing on all the flow table of some priority Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/mlx5_core: Add flow steering base data structuresMaor Gottlieb2015-12-123-1/+123
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introducing the base data structure and its operations that are going to represent ConnectX-4 Flow Steering, this data structure is basically a tree and all Flow steering objects such as (Flow Table/Flow Group/FTE/etc ..) are represented as fs_node(s). fs_node is the base object which describes a basic tree node, with the following extra info: type: describes the runtime type of the node (Object). lock: lock this node sub-tree. ref_count: number of children + current references. remove_func: a generic destructor. fs_node types will be used and explained once the usage is added in the following patches. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/mlx5_core: Introduce flow steering firmware commandsMaor Gottlieb2015-12-124-1/+386
| | | | | | | | | | | | | | | | | | | | | | Introduce new Flow Steering (FS) firmware commands, in-order to support the new flow steering infrastructure. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/mlx5e: Assign random MAC address if neededSaeed Mahameed2015-12-122-0/+8
| | | | | | | | | | | | | | | | | | | | | | Under SRIOV there might be a case where VFs are loaded without pre-assigned MAC address. In this case, the VF will randomize its own MAC. This will address the case of administrator not assigning MAC to the VF through the PF OS APIs and keep udev happy. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/mlx5: Fix query E-Switch capabilitiesSaeed Mahameed2015-12-121-1/+1
| | | | | | | | | | | | | | | | | | E-Switch capabilities should be queried only if E-Switch flow table is supported and not only when vport group manager. Fixes: d6666753c6e8 ("net/mlx5: E-Switch, Introduce HCA cap and E-Switch vport context") Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | mlxsw: core: remove an unneeded conditionDan Carpenter2015-12-121-1/+1
| | | | | | | | | | | | | | | | We already know "err" is zero so there is no need to check. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | mlxsw: spectrum: fix some error handlingDan Carpenter2015-12-121-1/+1
| | | | | | | | | | | | | | | | | | The "err = " assignment is missing here. Fixes: 0d65fc13042f ('mlxsw: spectrum: Implement LAG port join/leave') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/mlx4_core: Support the HA mode for SRIOV VFs tooMoni Shoua2015-12-071-10/+97
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the mlx4 driver runs in HA mode, and all VFs are single ported ones, we make their single port Highly-Available. This is done by taking advantage of the HA mode properties (following bonding changes with programming the port V2P map, etc) and adding the missing parts which are unique to SRIOV such as mirroring VF steering rules on both ports. Due to limits on the MAC and VLAN table this mode is enabled only when number of total VFs is under 64. Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/mlx4_core: Keep VLAN/MAC tables mirrored in multifunc HA modeMoni Shoua2015-12-072-23/+581
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Due to HW limitations, indexes to MAC and VLAN tables are always taken from the table of the actual port. So, if a resource holds an index to a table, it may refer to different values during the lifetime of the resource, unless the tables are mirrored. Also, even when driver is not in HA mode the policy of allocating an index to these tables is such to make sure, as much as possible, that when the time comes the mirroring will be successful. This means that in multifunction mode the allocation of a free index in a port's table tries to make sure that the same index in the other's port table is also free. Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/mlx4_core: Support mirroring VF DMFS rules on both portsMoni Shoua2015-12-072-9/+186
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Under HA mode, steering rules set by VFs should be mirrored on both ports of the device so packets will be accepted no matter on which port they arrived. Since getting into HA mode is done dynamically when the user bonds mlx4 Ethernet netdevs, we keep hold of the VF DMFS rule mbox with the port value flipped (1->2,2->1) and execute the mirroring when getting into HA mode. Later, when going out of HA mode, we unset the mirrored rules. In that context note that mirrored rules cannot be removed explicitly. Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/mlx4_core: Use both physical ports to dispatch link state events to VFMoni Shoua2015-12-071-4/+20
| | | | | | | | | | | | | | | | | | | | Under HA mode, the link down event should be sent to VFs only if both ports are down. Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/mlx4_core: Use both physical ports to set the VF link stateOr Gerlitz2015-12-072-1/+12
| | | | | | | | | | | | | | | | | | In HA mode, the link state for VFs for which the policy is "auto" (i.e. follow the physical link state) should be ORed from both ports. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
* | mlxsw: core: Change BUG to WARN in hwmon codeJiri Pirko2015-12-031-1/+1
| | | | | | | | | | | | | | | | | | Better to just warn the user that something really odd is going on and continue to run. Suggested-by: Or Gerlitz <gerlitz.or@gmail.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/mlx5e: Add support for SR-IOV ndosSaeed Mahameed2015-12-031-1/+83
| | | | | | | | | | | | | | | | | | Implement and enable SR-IOV ndos to manage SR-IOV configuration via netdev netlink API. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/mlx5: E-Switch, Introduce get vf statisticsSaeed Mahameed2015-12-032-0/+70
| | | | | | | | | | | | | | | | | | Add support to get VF statistics using query vport counter command. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/mlx5: E-Switch, Introduce set vport vlan (VST mode)Saeed Mahameed2015-12-032-2/+134
| | | | | | | | | | | | | | | | | | Add query and modify functions to control client vlan and qos striping or insertion, in E-Switch vports contexts. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-02 11:41:56 +0200