summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/netronome/nfp/nfpcore
Commit message (Collapse)AuthorAgeFilesLines
* nfp: update the old flash error messageJakub Kicinski2019-06-151-1/+6
| | | | | | | | | | | Apparently there are still cards in the wild with a very old management FW. Let's make the error message in that case indicate more clearly that management firmware has to be updated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* nfp: nsp: implement read SFF module EEPROMDirk van der Merwe2019-04-022-0/+70
| | | | | | | | | | The NSP now provides the ability to read from the SFF module EEPROM. Note that even if an error occurs, the NSP may still provide some of the data. Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* nfp: nsp: set higher timeout for flash bundleDirk van der Merwe2019-03-011-4/+1Star
| | | | | | | | | | | | | | | | | | | | The management firmware now supports being passed a bundle with multiple components to be stored in flash at once. This makes it easier to update all components to a known state with a single user command, however, this also has the potential to increase the time required to perform the update significantly. The management firmware only updates the components out of a bundle which are outdated, however, we need to make sure we can handle the absolute worst case where a CPLD update can take a long time to perform. We set a very conservative total timeout of 900s which already adds a contingency. Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* nfp: nsp: allow the use of DMA bufferJakub Kicinski2019-03-011-5/+191
| | | | | | | | | | | | Newer versions of NSP can access host memory. Simplest access type requires all data to be in one contiguous area. Since we don't have the guarantee on where callers of the NSP ABI will allocate their buffers we allocate a bounce buffer and copy the data in and out. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* nfp: nsp: move default buffer handling into its own functionJakub Kicinski2019-03-011-42/+51
| | | | | | | | | DMA version of NSP communication is coming, move the code which copies data into the NFP buffer into a separate function. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* nfp: nsp: use fractional size of the bufferJakub Kicinski2019-03-011-6/+7
| | | | | | | | | NSP expresses the buffer size in MB and 4 kB blocks. For small buffers the kB part may make a difference, so count it in. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* nfp: report RJ45 connector in ethtoolJakub Kicinski2019-03-012-0/+4
| | | | | | | Add support for reporting twisted pair port type. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* nfp: nsp: add support for versions commandJakub Kicinski2019-02-022-0/+81
| | | | | | | Retrieve the FW versions with the new command. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* nfp: use struct_size() in kzalloc()Gustavo A. R. Silva2019-02-021-2/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; struct boo entry[]; }; instance = kzalloc(sizeof(struct foo) + count * sizeof(struct boo), GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* nfp: replace long license headers with SPDXJakub Kicinski2018-10-1122-704/+44Star
| | | | | | | | | | | | Replace the repeated license text with SDPX identifiers. While at it bump the Copyright dates for files we touched this year. Signed-off-by: Edwin Peer <edwin.peer@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Nic Viljoen <nick.viljoen@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* nfp: validate rtsym accesses fall within the symbolJakub Kicinski2018-09-061-3/+45
| | | | | | | | | | With the accesses to rtsyms now all going via special helpers we can easily make sure the driver is not reading past the end of the symbol. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Francois H. Theron <francois.theron@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* nfp: prefix rtsym error messages with symbol nameJakub Kicinski2018-09-061-10/+11
| | | | | | | | | | For ease of debug preface all error messages with the name of the symbol which caused them. Use the same message format for existing messages while at it. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Francois H. Theron <francois.theron@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* nfp: fix readq on absolute RTsymsJakub Kicinski2018-09-061-2/+4
| | | | | | | | | | Return the error and report value through the output param. Fixes: 640917dd81b6 ("nfp: support access to absolute RTsyms") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Francois H. Theron <francois.theron@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* nfp: support access to absolute RTsymsJakub Kicinski2018-08-292-9/+46
| | | | | | | | Add support in nfpcore for reading the absolute RTsyms. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Francois H. Theron <francois.theron@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* nfp: convert existing RTsym helpers to full target decodingJakub Kicinski2018-08-291-14/+14
| | | | | | | | | Make nfp_rtsym_{read,write}_le() and nfp_rtsym_map() use the new target resolution helpers to allow accessing in-cache symbols. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Francois H. Theron <francois.theron@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* nfp: pass cpp_id to nfp_cpp_map_area()Jakub Kicinski2018-08-293-12/+12
| | | | | | | | | Align nfp_cpp_map_area() with other CPP-level APIs and pass encoded cpp_id/dest rather than target, action, domain tuple. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Francois H. Theron <francois.theron@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* nfp: add RTsym access helpersJakub Kicinski2018-08-292-0/+171
| | | | | | | | | | | | | | | RTsyms may have special encodings for more complex symbol types. For example symbols which are placed in external memory unit's cache directly, constants or local memory. Add set of helpers which will check for those special encodings and handle them correctly. For now only add direct cache accesses, we don't have a need to access the other ones in foreseeable future. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Francois H. Theron <francois.theron@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* nfp: add basic errors messages to target logicJakub Kicinski2018-08-291-2/+10
| | | | | | | | | | Add error prints to CPP target encoding/decoding logic, otherwise it's quite hard to pin point the reasons why read or write operations fail. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Francois H. Theron <francois.theron@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* nfp: save the MU locality field offsetJakub Kicinski2018-08-293-31/+38
| | | | | | | | | | | We will soon need the MU locality field offset much more often than just for decoding MIP address. Save it in nfp_cpp for quick access. Note that we can already reuse the target config from nfp_cpp, no need to do the XPB read. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Francois H. Theron <francois.theron@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* nfp: refactor the per-chip PCIe configJakub Kicinski2018-08-292-13/+41
| | | | | | | | | Use a switch statement instead of ifs for code dependent on chip version. While at it make sure we fail for unknown chip revisions. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* nfp: add support for NFP5000Jakub Kicinski2018-08-291-1/+3
| | | | | | | | | Add NFP5000 to supported chips, the chip is backward compatible with NFP4000 and NFP6000, so core PCIe code needs to handle it the same way as 4k and 6k. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* nfp: add support for indirect HWinfo lookupJakub Kicinski2018-08-292-0/+44
| | | | | | | | | | | | Management FW can adjust some of the information in the HWinfo table at runtime. In some cases reading the table directly will not yield correct results. Add a NSP command for looking up information. Up until now we weren't making use of any of the values which may get adjusted. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* nfp: interpret extended FW load result codesJakub Kicinski2018-08-292-3/+85
| | | | | | | | | | | | | | | | | | | | | To enable easier FW distribution NFP can now automatically select between FW stored on the flash and loaded from the kernel. If FW loading policy is set to auto it will compare the versions of FW from the host and from the flash and load the newer one. If FW type doesn't match (e.g. one advanced application vs another) the FW from the host takes precedence, unless one of them is the basic NIC firmware, in which case the non-basic-NIC FW is selected. This automatic selection mechanism requires we inform user what the verdict was. Print a message to the logs explaining the decision and the reason. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* nfp: attempt FW load from flashJakub Kicinski2018-08-292-0/+12
| | | | | | | | | | | Flash may contain a default NFP application FW. This application can either be put there by the user (with ethtool -f) or shipped with the card. If file system FW is not found, attempt to load this flash stored app FW. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* nfp: encapsulate NSP command arguments into structsJakub Kicinski2018-08-291-69/+136
| | | | | | | | | | There is already a fair number of arguments to nfp_nsp_command() family of functions. Encapsulate them into structures to make adding new ones easier. No functional changes. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* nfp: clean up return types in kdoc commentsJakub Kicinski2018-08-141-4/+2Star
| | | | | | | | | | Remove 'Return:' information from functions which no longer return a value. Also update name and return types of nfp_nffw_info access functions. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller2018-07-031-1/+1
|\ | | | | | | | | | | | | | | | | | | Simple overlapping changes in stmmac driver. Adjust skb_gro_flush_final_remcsum function signature to make GRO list changes in net-next, as per Stephen Rothwell's example merge resolution. Signed-off-by: David S. Miller <davem@davemloft.net>
| * nfp: cast sizeof() to int when comparing with error codeChengguang Xu2018-06-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | sizeof() will return unsigned value so in the error check negative error code will be always larger than sizeof(). Fixes: a0d8e02c35ff ("nfp: add support for reading nffw info") Signed-off-by: Chengguang Xu <cgxu519@gmx.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | nfp: fail probe if serial or interface id is missingJakub Kicinski2018-06-303-14/+28
|/ | | | | | | | | | | | On some platforms with broken ACPI tables we may not have access to the Serial Number PCIe capability. This capability is crucial for us for switchdev operation as we use serial number as switch ID, and for communication with management FW where interface ID is used. If we can't determine the Serial Number we have to fail device probe. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* nfp: don't pad strings in nfp_cpp_resource_find() to avoid gcc 8 warningJakub Kicinski2018-06-131-5/+2Star
| | | | | | | | | | | | | | | | | | | | | | | | Once upon a time nfp_cpp_resource_find() took a name parameter, which could be any user-chosen string. Resources are identified by a CRC32 hash of a 8 byte string, so we had to pad user input with zeros to make sure CRC32 gave the correct result. Since then nfp_cpp_resource_find() was made to operate on allocated resources only (struct nfp_resource). We kzalloc those so there is no need to pad the strings and use memcmp. This avoids a GCC 8 stringop-truncation warning: In function ‘nfp_cpp_resource_find’, inlined from ‘nfp_resource_try_acquire’ at .../nfpcore/nfp_resource.c:153:8, inlined from ‘nfp_resource_acquire’ at .../nfpcore/nfp_resource.c:206:9: .../nfpcore/nfp_resource.c:108:2: warning: strncpy’ output may be truncated copying 8 bytes from a string of length 8 [-Wstringop-truncation] strncpy(name_pad, res->name, sizeof(name_pad)); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* nfp: abm: add helpers for configuring queue marking levelsJakub Kicinski2018-05-291-0/+5
| | | | | | | | | Queue levels for simple ECN marking are stored in _abi_nfd_out_q_lvls_X symbol, where X is the PCIe PF id. Find out the location of that symbol and add helpers for modifying it. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* nfp: nfpcore: add rtsym writing functionJohn Hurley2018-05-252-0/+45
| | | | | | | | | | Add an rtsym API function that combines the lookup of a symbol and the writing of a value to it. Values can be written as unsigned 32 or 64 bits. Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* nfp: core: allow 4-byte aligned accesses to Memory UnitsJakub Kicinski2018-05-231-50/+44Star
| | | | | | | | | | | | | | Current code doesn't enforce length requirements on 32bit accesses with action NFP_CPP_ACTION_RW to memory units, but if the access is only aligned to 4 bytes as well we will fall into the explicit access case and error out. Such accesses are correct, allow them by lowering the width earlier. While at it use a switch statement to improve readability. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* nfp: print PCIe link bandwidth on probeJakub Kicinski2018-04-251-0/+1
| | | | | | | | | To aid debugging of performance issues caused by limited PCIe bandwidth print the PCIe link information on probe. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* nfp: reset local locks on initJakub Kicinski2018-04-254-0/+108
| | | | | | | | | | | | | | | | NFP locks record the owner when held, for PCIe devices the owner ID will be the PCIe link number. When driver loads it should scan known locks and if they indicate that they are held by local endpoint but the driver doesn't hold them - release them. Locks can be left taken for instance when kernel gets kexec-ed or after a crash. Management FW tries to clean up stale locks too, but it currently depends on PCIe link going down which doesn't always happen. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* nfp: print a message when mutex wait is interruptedJakub Kicinski2018-04-131-1/+4
| | | | | | | | | When waiting for an NFP mutex is interrupted print a message to make root causing later error messages easier. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* nfp: ignore signals when communicating with management FWJakub Kicinski2018-04-131-2/+1Star
| | | | | | | | | | | | | | | | | | | | | | We currently allow signals to interrupt the wait for management FW commands. Exiting the wait should not cause trouble, the FW will just finish executing the command in the background and new commands will wait for the old one to finish. However, this may not be what users expect (Ctrl-C not actually stopping the command). Moreover some systems routinely request link information with signals pending (Ubuntu 14.04 runs a landscape-sysinfo python tool from MOTD) worrying users with errors like these: nfp 0000:04:00.0: nfp_nsp: Error -512 waiting for code 0x0007 to start nfp 0000:04:00.0: nfp: reading port table failed -512 Make the wait for management FW responses non-interruptible. Fixes: 1a64821c6af7 ("nfp: add support for service processor access") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* nfp: use full 40 bits of the NSP buffer addressDirk van der Merwe2018-04-041-4/+5
| | | | | | | | | | | | | | | | | | | | | | | The NSP default buffer is a piece of NFP memory where additional command data can be placed. Its format has been copied from host buffer, but the PCIe selection bits do not make sense in this case. If those get masked out from a NFP address - writes to random place in the chip memory may be issued and crash the device. Even in the general NSP buffer case, it doesn't make sense to have the PCIe selection bits there anymore. These are unused at the moment, and when it becomes necessary, the PCIe selection bits should rather be moved to another register to utilise more bits for the buffer address. This has never been an issue because the buffer used to be allocated in memory with less-than-38-bit-long address but that is about to change. Fixes: 1a64821c6af7 ("nfp: add support for service processor access") Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* nfp: add Makefiles to all directoriesJakub Kicinski2018-02-222-0/+4
| | | | | | | | To be able to build separate objects we need to provide Kbuild with a Makefile in each directory. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* nfp: fix kdoc warnings on nested structuresJakub Kicinski2018-02-062-31/+33
| | | | | | | | | | | | | Commit 84ce5b987783 ("scripts: kernel-doc: improve nested logic to handle multiple identifiers") improved the handling of nested structure definitions in scripts/kernel-doc, and changed the expected format of documentation. This causes new warnings to appear on W=1 builds. Only comment changes. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* nfp: core: make scalar CPP helpers fail on short accessesJakub Kicinski2018-01-193-35/+49
| | | | | | | | | | | | | | | Currently the helpers for accessing 4 or 8 byte values over the CPP bus return the length of IO on success. If the IO was short caller has to deal with error handling. The short IO for 4/8B values is completely impractical. Make the helpers return an error if full access was not possible. Fix the few places which are actually dealing with errors correctly, most call sites already only deal with negative return codes. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller2017-12-182-0/+12
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Daniel Borkmann says: ==================== pull-request: bpf-next 2017-12-18 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Allow arbitrary function calls from one BPF function to another BPF function. As of today when writing BPF programs, __always_inline had to be used in the BPF C programs for all functions, unnecessarily causing LLVM to inflate code size. Handle this more naturally with support for BPF to BPF calls such that this __always_inline restriction can be overcome. As a result, it allows for better optimized code and finally enables to introduce core BPF libraries in the future that can be reused out of different projects. x86 and arm64 JIT support was added as well, from Alexei. 2) Add infrastructure for tagging functions as error injectable and allow for BPF to return arbitrary error values when BPF is attached via kprobes on those. This way of injecting errors generically eases testing and debugging without having to recompile or restart the kernel. Tags for opting-in for this facility are added with BPF_ALLOW_ERROR_INJECTION(), from Josef. 3) For BPF offload via nfp JIT, add support for bpf_xdp_adjust_head() helper call for XDP programs. First part of this work adds handling of BPF capabilities included in the firmware, and the later patches add support to the nfp verifier part and JIT as well as some small optimizations, from Jakub. 4) The bpftool now also gets support for basic cgroup BPF operations such as attaching, detaching and listing current BPF programs. As a requirement for the attach part, bpftool can now also load object files through 'bpftool prog load'. This reuses libbpf which we have in the kernel tree as well. bpftool-cgroup man page is added along with it, from Roman. 5) Back then commit e87c6bc3852b ("bpf: permit multiple bpf attachments for a single perf event") added support for attaching multiple BPF programs to a single perf event. Given they are configured through perf's ioctl() interface, the interface has been extended with a PERF_EVENT_IOC_QUERY_BPF command in this work in order to return an array of one or multiple BPF prog ids that are currently attached, from Yonghong. 6) Various minor fixes and cleanups to the bpftool's Makefile as well as a new 'uninstall' and 'doc-uninstall' target for removing bpftool itself or prior installed documentation related to it, from Quentin. 7) Add CONFIG_CGROUP_BPF=y to the BPF kernel selftest config file which is required for the test_dev_cgroup test case to run, from Naresh. 8) Fix reporting of XDP prog_flags for nfp driver, from Jakub. 9) Fix libbpf's exit code from the Makefile when libelf was not found in the system, also from Jakub. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * nfp: add nfp_cpp_area_size() accessorJakub Kicinski2017-12-152-0/+12
| | | | | | | | | | | | | | | | | | | | Allow users outside of core reading area sizes. This was not needed previously because whatever entity created the area would usually know what size it asked for. The nfp_rtsym_map() helper, however, will allocate the area based on the size of an RT-symbol with given name. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* | nfp: implement firmware flashingDirk van der Merwe2017-12-152-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Firmware flashing takes around 60s (specified to not take more than 70s). Prevent hogging the RTNL lock in this time and make use of the longer timeout for the NSP command. The timeout is set to 2.5 * 70 seconds. We only allow flashing the firmware from reprs or PF netdevs. VFs do not have an app reference. Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | nfp: extend NSP infrastructure for configurable timeoutsDirk van der Merwe2017-12-151-17/+43
|/ | | | | | | | | | | | The firmware flashing NSP operation takes longer to execute than the current default timeout. We need a mechanism to set a longer timeout for some commands. This patch adds the infrastructure to this. The default timeout is still 30 seconds. Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* nfp: dump all hwinfoCarl Heymann2017-12-052-0/+12
| | | | | | | | | | | - Dump hwinfo as separate TLV chunk, in a packed format containing zero-separated key and value strings. - This provides additional debug context, if requested by the dumpspec. Signed-off-by: Carl Heymann <carl.heymann@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* nfp: fix old kdoc issuesJakub Kicinski2017-12-011-6/+3Star
| | | | | | | | | | Since commit 3a025e1d1c2e ("Add optional check for bad kernel-doc comments") when built with W=1 build will complain about kdoc errors. Fix the kdoc issues we have. kdoc is still confused by defines in nfp_net_ctrl.h but those are not really errors. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* nfp: add helpers for FEC supportDirk van der Merwe2017-11-052-0/+94
| | | | | | | | | | | | | | Implement helpers to determine and modify FEC modes via the NSP. The NSP advertises FEC capabilities on a per port basis and provides support for: * Auto mode selection * Reed Solomon * BaseR * None/Off Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* nfp: make use of MAC reinitJakub Kicinski2017-11-052-0/+11
| | | | | | | | | | | | | | | | Recent management FW images can perform full reinit of MAC cores without requiring a reboot. When loading the driver check if there are changes pending and if so call NSP MAC reinit. Full application FW reload is still required, and all MACs need to be reinited at the same time (not only the ones which have been reconfigured, and thus potentially causing disruption to unrelated netdevs) therefore for now changing MAC config without reloading the driver still remains future work. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Tested-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* nfp: don't depend on compiler constant propagationJakub Kicinski2017-11-051-8/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Matthias reports: nfp_eth_set_bit_config() is marked as __always_inline to allow gcc to identify the 'mask' parameter as known to be constant at compile time, which is required to use the FIELD_GET() macro. The forced inlining does the trick for gcc, but for kernel builds with clang it results in undefined symbols: drivers/net/ethernet/netronome/nfp/nfpcore/nfp_nsp_eth.o: In function `__nfp_eth_set_aneg': drivers/net/ethernet/netronome/nfp/nfpcore/nfp_nsp_eth.c:(.text+0x787): undefined reference to `__compiletime_assert_492' drivers/net/ethernet/netronome/nfp/nfpcore/nfp_nsp_eth.c:(.text+0x7b1): undefined reference to `__compiletime_assert_496' These __compiletime_assert_xyx() calls would have been optimized away if the compiler had seen 'mask' as a constant. Add a macro to extract the mask and shift and pass those to nfp_eth_set_bit_config() separately. Reported-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Tested-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-06-23 11:20:45 +0200