summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/qualcomm
Commit message (Collapse)AuthorAgeFilesLines
* drivers: add explicit interrupt.h includesFlorian Westphal2017-03-301-0/+1
| | | | | | | | | | | These files all use functions declared in interrupt.h, but currently rely on implicit inclusion of this file (via netns/xfrm.h). That won't work anymore when the flow cache is removed so include that header where needed. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: qcom/emac: optimize QDF2400 SGMII RX/TX impedence valuesTimur Tabi2017-03-071-0/+6
| | | | | | | | Adjust the impedance values of the RX and TX lanes in the SGMII block so that they are closer to optimal values. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: qualcomm: qca: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes2017-02-211-8/+10
| | | | | | | | | | | The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: qcom/emac: fix a sizeof() typoDan Carpenter2017-02-141-1/+1
| | | | | | | | | | We had intended to say "sizeof(u32)" but the "u" is missing. Fortunately, sizeof(32) is also 4, so the original code still works. Fixes: c4e7beea2192 ("net: qcom/emac: add ethtool support for reading hardware registers") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: qcom/emac: add ethtool support for setting ring parametersTimur Tabi2017-02-091-0/+24
| | | | | | | | | | | | | | | Implement the set_ringparam method, which allows the user to specify the size of the TX and RX descriptor rings. The values are constrained to the limits of the hardware. Since the driver does not use separate queues for mini or jumbo frames, attempts to set those values are rejected. If the interface is already running when the setting is changed, then the interface is reset. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: qcom/emac: add ethtool support for reading hardware registersTimur Tabi2017-02-093-81/+119
| | | | | | | | | | | | Implement the get_regs_len and get_regs ethtool methods. The driver returns the values of selected hardware registers. The make the register offsets known to emac_ethtool, the the register offset macros are all combined into one header file. They were inexplicably and arbitrarily split between two files. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: qcom/emac: fix semicolon.cocci warningsWu Fengguang2017-02-081-1/+1
| | | | | | | | | | | | drivers/net/ethernet/qualcomm/emac/emac-ethtool.c:155:49-50: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci CC: Timur Tabi <timur@codeaurora.org> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: qcom/emac: add ethool support for setting pause parametersTimur Tabi2017-02-074-18/+48
| | | | | | | | | | | | | | | | | | | | | | To support setting the pause parameters, the driver can no longer just mirror the PHY. The set_pauseparam feature allows the driver to force the setting in the MAC, regardless of how the PHY is configured. This means that we now need to maintain an internal state for pause frame support, and so get_pauseparam also needs to be updated. If the interface is already running when the setting is changed, then the interface is reset. Note that if the MAC is configured to enable RX pause frame support (i.e. it transmits pause frames to throttle the other end), but the PHY is configured to block those frames, then the feature will not work. Also some buffer size initialization code into emac_init_adapter(), so that it lives with similar code, including the initializtion of pause frame support. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers: net: generalize napi_complete_done()Eric Dumazet2017-01-301-1/+1
| | | | | | | | | | | | napi_complete_done() allows to opt-in for gro_flush_timeout, added back in linux-3.19, commit 3b47d30396ba ("net: gro: add a per device gro flush timer") This allows for more efficient GRO aggregation without sacrifying latencies. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: qcom/emac: add an error interrupt handler for the sgmiiTimur Tabi2017-01-304-7/+153
| | | | | | | | | | | | | | The SGMII (internal PHY) can report decode errors via an interrupt. It can also report autonegotiation status changes, but we don't need to track those. The SGMII can recover automatically from most decode errors, so we only reset the interface if we get multiple consecutive errors. It's possible for bogus decode errors to be reported while the link is being brought up. The interrupt is registered when the interface is opened, and it's enabled after the link is up. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: qcom/emac: remove extraneous wake-on-lan codeTimur Tabi2017-01-302-14/+0Star
| | | | | | | | | The EMAC driver does not support wake-on-lan, but there is still code left-over that partially enables it. Remove that code and a few macros that support it. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: qcom/emac: do not call emac_mac_start twiceTimur Tabi2017-01-303-4/+1Star
| | | | | | | | emac_mac_start() uses information from the external PHY to program the MAC, so it makes no sense to call it before the link is up. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: qcom/emac: always use autonegotiation to configure the SGMII linkTimur Tabi2017-01-301-39/+10Star
| | | | | | | | | | Regardless of how the external PHY is configured, the internal PHY (the "SGMII" block) is capable of configuring the SGMII link automatically. When the external PHY link comes up, regardless of how it is configured, the SGMII link is configured automatically. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: qcom/emac: display the phy driver info after we connectTimur Tabi2017-01-302-4/+3Star
| | | | | | | | | | | | | | | The PHY driver is attached only when the driver calls phy_connect_direct(). Calling phy_attached_print() to display information about the PHY driver prior to that point is meaningless. The interface can be brought down, a new PHY driver can be loaded, and the interface then brought back up. This is the correct time to display information about the attached driver. Since phy_attached_print() also prints information about the interrupt, that needs to be set as well. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: qcom/emac: claim the irq only when the device is openedTimur Tabi2017-01-233-14/+11Star
| | | | | | | | | | During reset, functions emac_mac_down() and emac_mac_up() are called, so we don't want to free and claim the IRQ unnecessarily. Move those operations to open/close. Signed-off-by: Timur Tabi <timur@codeaurora.org> Reviewed-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: qcom/emac: rename emac_phy to emac_sgmii and move itTimur Tabi2017-01-239-24/+23Star
| | | | | | | | | | | | | | | | | The EMAC has an internal PHY that is often called the "SGMII". This SGMII is also connected to an external PHY, which is managed by phylib. These dual PHYs often cause confusion. In this case, the data structure for managing the SGMII was mis-named and located in the wrong header file. Structure emac_phy is renamed to emac_sgmii to clearly indicate it applies to the internal PHY only. It also also moved from emac_phy.h (which supports the external PHY) to emac_sgmii.h (where it belongs). To keep the changes minimal, only the structure name is changed, not the names of any variables of that type. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* Revert "net: qcom/emac: configure the external phy to allow pause frames"Timur Tabi2017-01-201-6/+0Star
| | | | | | | | | | | | | | This reverts commit 3e884493448131179a5b7cae1ddca1028ffaecc8. With commit 529ed1275263 ("net: phy: phy drivers should not set SUPPORTED_[Asym_]Pause"), phylib now handles automatically enabling pause frame support in the PHY, and the MAC driver should follow suit. Since the EMAC driver driver does this, we no longer need to force pause frames support. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Remove usage of net_device last_rx memberTobias Klauser2017-01-181-1/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The network stack no longer uses the last_rx member of struct net_device since the bonding driver switched to use its own private last_rx in commit 9f242738376d ("bonding: use last_arp_rx in slave_last_rx()"). However, some drivers still (ab)use the field for their own purposes and some driver just update it without actually using it. Previously, there was an accompanying comment for the last_rx member added in commit 4dc89133f49b ("net: add a comment on netdev->last_rx") which asked drivers not to update is, unless really needed. However, this commend was removed in commit f8ff080dacec ("bonding: remove useless updating of slave->dev->last_rx"), so some drivers added later on still did update last_rx. Remove all usage of last_rx and switch three drivers (sky2, atp and smc91c92_cs) which actually read and write it to use their own private copy in netdev_priv. Compile-tested with allyesconfig and allmodconfig on x86 and arm. Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Mirko Lindner <mlindner@marvell.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2017-01-172-4/+9
|\
| * net: qcom/emac: grab a reference to the phydev on ACPI systemsTimur Tabi2017-01-122-4/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 6ffe1c4cd0a7 ("net: qcom/emac: fix of_node and phydev leaks") fixed the problem with reference leaks on phydev, but the fix is device-tree specific. When the driver unloads, the reference is dropped only on DT systems. Instead, it's cleaner if up grab an reference on ACPI systems. When the driver unloads, we can drop the reference without having to check whether we're on a DT system. Signed-off-by: Timur Tabi <timur@codeaurora.org> Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: qcom/emac: add ethtool supportTimur Tabi2017-01-104-21/+221
| | | | | | | | | | | | | | | | | | | | | | | | Add support for some ethtool methods: get/set link settings, get/set message level, get statistics, get link status, get ring params, get pause params, and restart autonegotiation. The code to collect the hardware statistics is moved into its own function so that it can be used by "get statistics" method. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: make ndo_get_stats64 a void functionstephen hemminger2017-01-081-4/+2Star
|/ | | | | | | | | | | | The network device operation for reading statistics is only called in one place, and it ignores the return value. Having a structure return value is potentially confusing because some future driver could incorrectly assume that the return value was used. Fix all drivers with ndo_get_stats64 to have a void function. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: qcom/emac: don't try to claim clocks on ACPI systemsTimur Tabi2016-12-171-0/+9
| | | | | | | | | | | On ACPI systems, clocks are not available to drivers directly. They are handled exclusively by ACPI and/or firmware, so there is no clock driver. Calls to clk_get() always fail, so we should not even attempt to claim any clocks on ACPI systems. Signed-off-by: Timur Tabi <timur@codeaurora.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: qcom/emac: add support for the Qualcomm Technologies QDF2400Timur Tabi2016-12-104-5/+249
| | | | | | | | | | | | | | | | The QDF2432 and the QDF2400 have slightly different internal PHYs, so there are some programming differences. Some of the registers in the QDF2400 have moved, and some registers require different values during initialization. Because of the differences, and because HIDs are a scare resource, the ACPI tables specify the hardware version in an _HRV property. Version 1 is the QDF2432, and version 2 is the QDF2400. Any future SOC that has the same internal PHY but different programming requirements will be assigned the next available version number. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: qcom/emac: move phy init code to separate filesTimur Tabi2016-12-105-523/+478Star
| | | | | | | | | | | | | | | | | The internal PHY of the EMAC differs on each SOC, and the list will only continue to grow. By separating the code into individual files, we can add support for more SOCs more cleanly. Note: The internal PHY is also sometimes called the SGMII device. We also stop referring to the various PHY variations by version number, so no more "v2", "v3", etc. Instead, the devices are named after the SOC they are, which is in sync with the device tree property names. Future patches will probably rearrange more code among the files. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2016-12-032-0/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Couple conflicts resolved here: 1) In the MACB driver, a bug fix to properly initialize the RX tail pointer properly overlapped with some changes to support variable sized rings. 2) In XGBE we had a "CONFIG_PM" --> "CONFIG_PM_SLEEP" fix overlapping with a reorganization of the driver to support ACPI, OF, as well as PCI variants of the chip. 3) In 'net' we had several probe error path bug fixes to the stmmac driver, meanwhile a lot of this code was cleaned up and reorganized in 'net-next'. 4) The cls_flower classifier obtained a helper function in 'net-next' called __fl_delete() and this overlapped with Daniel Borkamann's bug fix to use RCU for object destruction in 'net'. It also overlapped with Jiri's change to guard the rhashtable_remove_fast() call with a check against tc_skip_sw(). 5) In mlx4, a revert bug fix in 'net' overlapped with some unrelated changes in 'net-next'. 6) In geneve, a stale header pointer after pskb_expand_head() bug fix in 'net' overlapped with a large reorganization of the same code in 'net-next'. Since the 'net-next' code no longer had the bug in question, there was nothing to do other than to simply take the 'net-next' hunks. Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: qcom/emac: fix of_node and phydev leaksJohan Hovold2016-11-282-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | Make sure to drop the reference taken by of_phy_find_device() during probe on probe errors and on driver unbind. Also drop the of_node reference taken by of_parse_phandle() in the same path. Fixes: b9b17debc69d ("net: emac: emac gigabit ethernet controller driver") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2016-11-152-5/+12
|\| | | | | | | | | | | | | Several cases of bug fixes in 'net' overlapping other changes in 'net-next-. Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: qcom/emac: enable flow control if requestedTimur Tabi2016-11-101-4/+5
| | | | | | | | | | | | | | | | If the PHY has been configured to allow pause frames, then the MAC should be configured to generate and/or accept those frames. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: qcom/emac: configure the external phy to allow pause framesTimur Tabi2016-11-101-0/+6
| | | | | | | | | | | | | | | | | | | | Pause frames are used to enable flow control. A MAC can send and receive pause frames in order to throttle traffic. However, the PHY must be configured to allow those frames to pass through. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: qcom/emac: use correct value for SGMII_LN_UCDR_SO_GAIN_MODE0Timur Tabi2016-11-011-1/+1
| | | | | | | | | | | | | | | | The documentation says that SGMII_LN_UCDR_SO_GAIN_MODE0 should be set to 0, not 6, on the Qualcomm Technologies QDF2432. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2016-10-302-2/+7
|\| | | | | | | | | | | | | | | | | Mostly simple overlapping changes. For example, David Ahern's adjacency list revamp in 'net-next' conflicted with an adjacency list traversal bug fix in 'net'. Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: qcom/emac: Fix module autoload for OF registrationJavier Martinez Canillas2016-10-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/net/ethernet/qualcomm/emac/qcom-emac.ko | grep alias alias: platform:qcom-emac After this patch: $ modinfo drivers/net/ethernet/qualcomm/emac/qcom-emac.ko | grep alias alias: platform:qcom-emac alias: of:N*T*Cqcom,fsm9900-emacC* alias: of:N*T*Cqcom,fsm9900-emac Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: qcom/emac: disable interrupts before calling phy_disconnectTimur Tabi2016-10-151-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | There is a race condition that can occur if EMAC interrupts are enabled when phy_disconnect() is called. phy_disconnect() sets adjust_link to NULL. When an interrupt occurs, the ISR might call phy_mac_interrupt(), which wakes up the workqueue function phy_state_machine(). This function might reference adjust_link, thereby causing a null pointer exception. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ethernet: use net core MTU range checking in more driversJarod Wilson2016-10-201-7/+6Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Somehow, I missed a healthy number of ethernet drivers in the last pass. Most of these drivers either were in need of an updated max_mtu to make jumbo frames possible to enable again. In a few cases, also setting a different min_mtu to match previous lower bounds. There are also a few drivers that had no upper bounds checking, so they're getting a brand new ETH_MAX_MTU that is identical to IP_MAX_MTU, but accessible by includes all ethernet and ethernet-like drivers all have already. acenic: - min_mtu = 0, max_mtu = 9000 amazon/ena: - min_mtu = 128, max_mtu = adapter->max_mtu amd/xgbe: - min_mtu = 0, max_mtu = 9000 sb1250: - min_mtu = 0, max_mtu = 1518 cxgb3: - min_mtu = 81, max_mtu = 65535 cxgb4: - min_mtu = 81, max_mtu = 9600 cxgb4vf: - min_mtu = 81, max_mtu = 65535 benet: - min_mtu = 256, max_mtu = 9000 ibmveth: - min_mtu = 68, max_mtu = 65535 ibmvnic: - min_mtu = adapter->min_mtu, max_mtu = adapter->max_mtu - remove now redundant ibmvnic_change_mtu jme: - min_mtu = 1280, max_mtu = 9202 mv643xx_eth: - min_mtu = 64, max_mtu = 9500 mlxsw: - min_mtu = 0, max_mtu = 65535 - Basically bypassing the core checks, and instead relying on dynamic checks in the respective switch drivers' ndo_change_mtu functions ns83820: - min_mtu = 0 - remove redundant ns83820_change_mtu, only checked for mtu > 1500 netxen: - min_mtu = 0, max_mtu = 8000 (P2), max_mtu = 9600 (P3) qlge: - min_mtu = 1500, max_mtu = 9000 - driver only supports setting mtu to 1500 or 9000, so the core check only rules out < 1500 and > 9000, qlge_change_mtu still needs to check that the value is 1500 or 9000 qualcomm/emac: - min_mtu = 46, max_mtu = 9194 xilinx_axienet: - min_mtu = 64, max_mtu = 9000 Fixes: 61e84623ace3 ("net: centralize net_device min/max MTU checking") CC: netdev@vger.kernel.org CC: Jes Sorensen <jes@trained-monkey.org> CC: Netanel Belgazal <netanel@annapurnalabs.com> CC: Tom Lendacky <thomas.lendacky@amd.com> CC: Santosh Raspatur <santosh@chelsio.com> CC: Hariprasad S <hariprasad@chelsio.com> CC: Sathya Perla <sathya.perla@broadcom.com> CC: Ajit Khaparde <ajit.khaparde@broadcom.com> CC: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> CC: Somnath Kotur <somnath.kotur@broadcom.com> CC: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> CC: John Allen <jallen@linux.vnet.ibm.com> CC: Guo-Fu Tseng <cooldavid@cooldavid.org> CC: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> CC: Jiri Pirko <jiri@mellanox.com> CC: Ido Schimmel <idosch@mellanox.com> CC: Manish Chopra <manish.chopra@qlogic.com> CC: Sony Chacko <sony.chacko@qlogic.com> CC: Rajesh Borundia <rajesh.borundia@qlogic.com> CC: Timur Tabi <timur@codeaurora.org> CC: Anirudha Sarangi <anirudh@xilinx.com> CC: John Linn <John.Linn@xilinx.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ethernet: use core min/max MTU checkingJarod Wilson2016-10-182-15/+7Star
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | et131x: min_mtu 64, max_mtu 9216 altera_tse: min_mtu 64, max_mtu 1500 amd8111e: min_mtu 60, max_mtu 9000 bnad: min_mtu 46, max_mtu 9000 macb: min_mtu 68, max_mtu 1500 or 10240 depending on hardware capability xgmac: min_mtu 46, max_mtu 9000 cxgb2: min_mtu 68, max_mtu 9582 (pm3393) or 9600 (vsc7326) enic: min_mtu 68, max_mtu 9000 gianfar: min_mtu 50, max_mu 9586 hns_enet: min_mtu 68, max_mtu 9578 (v1) or 9706 (v2) ksz884x: min_mtu 60, max_mtu 1894 myri10ge: min_mtu 68, max_mtu 9000 natsemi: min_mtu 64, max_mtu 2024 nfp: min_mtu 68, max_mtu hardware-specific forcedeth: min_mtu 64, max_mtu 1500 or 9100, depending on hardware pch_gbe: min_mtu 46, max_mtu 10300 pasemi_mac: min_mtu 64, max_mtu 9000 qcaspi: min_mtu 46, max_mtu 1500 - remove qcaspi_netdev_change_mtu as it is now redundant rocker: min_mtu 68, max_mtu 9000 sxgbe: min_mtu 68, max_mtu 9000 stmmac: min_mtu 46, max_mtu depends on hardware tehuti: min_mtu 60, max_mtu 16384 - driver had no max mtu checking, but product docs say 16k jumbo packets are supported by the hardware netcp: min_mtu 68, max_mtu 9486 - remove netcp_ndo_change_mtu as it is now redundant via-velocity: min_mtu 64, max_mtu 9000 octeon: min_mtu 46, max_mtu 65370 CC: netdev@vger.kernel.org CC: Mark Einon <mark.einon@gmail.com> CC: Vince Bridgers <vbridger@opensource.altera.com> CC: Rasesh Mody <rasesh.mody@qlogic.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Santosh Raspatur <santosh@chelsio.com> CC: Hariprasad S <hariprasad@chelsio.com> CC: Christian Benvenuti <benve@cisco.com> CC: Sujith Sankar <ssujith@cisco.com> CC: Govindarajulu Varadarajan <_govind@gmx.com> CC: Neel Patel <neepatel@cisco.com> CC: Claudiu Manoil <claudiu.manoil@freescale.com> CC: Yisen Zhuang <yisen.zhuang@huawei.com> CC: Salil Mehta <salil.mehta@huawei.com> CC: Hyong-Youb Kim <hykim@myri.com> CC: Jakub Kicinski <jakub.kicinski@netronome.com> CC: Olof Johansson <olof@lixom.net> CC: Jiri Pirko <jiri@resnulli.us> CC: Byungho An <bh74.an@samsung.com> CC: Girish K S <ks.giri@samsung.com> CC: Vipul Pandya <vipul.pandya@samsung.com> CC: Giuseppe Cavallaro <peppe.cavallaro@st.com> CC: Alexandre Torgue <alexandre.torgue@st.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Wingman Kwok <w-kwok2@ti.com> CC: Murali Karicheri <m-karicheri2@ti.com> CC: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ethernet: qualcomm: QCOM_EMAC should depend on HAS_DMA and HAS_IOMEMGeert Uytterhoeven2016-10-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | If NO_DMA=y: drivers/built-in.o: In function `emac_probe': emac.c:(.text+0x3780b8): undefined reference to `bad_dma_ops' emac.c:(.text+0x3780e2): undefined reference to `bad_dma_ops' emac.c:(.text+0x378112): undefined reference to `bad_dma_ops' emac.c:(.text+0x378146): undefined reference to `bad_dma_ops' emac.c:(.text+0x37816e): undefined reference to `bad_dma_ops' drivers/built-in.o:emac.c:(.text+0x37819a): more undefined references to `bad_dma_ops' follow If NO_IOMEM=y: drivers/net/ethernet/qualcomm/emac/emac.c: In function ‘emac_remove’: drivers/net/ethernet/qualcomm/emac/emac.c:736:3: error: implicit declaration of function ‘iounmap’ [-Werror=implicit-function-declaration] iounmap(adpt->phy.digital); ^ Add dependencies on HAS_DMA and HAS_IOMEM to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: qcom/emac: fix return value check in emac_sgmii_config()Wei Yongjun2016-10-041-4/+9
| | | | | | | | | | | | | | In case of error, the function ioremap() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Also add check for return value of platform_get_resource(). Fixes: 54e19bc74f33 ("net: qcom/emac: do not use devm on internal phy pdev") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: qcom/emac: initial ACPI supportTimur Tabi2016-09-293-26/+95
| | | | | | | | | | | | | | Add support for reading addresses, interrupts, and _DSD properties from ACPI tables, just like with device tree. The HID for the EMAC device itself is QCOM8070. The internal PHY is represented by a child node with a HID of QCOM8071. The EMAC also has some complex clock initialization requirements that are not represented by this patch. This will be addressed in a future patch. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: qcom/emac: use device_get_mac_addressTimur Tabi2016-09-291-6/+4Star
| | | | | | | | | Replace the DT-specific of_get_mac_address() function with device_get_mac_address, which works on both DT and ACPI platforms. This change makes it easier to add ACPI support. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: qcom/emac: do not use devm on internal phy pdevTimur Tabi2016-09-292-9/+37
| | | | | | | | | | | The platform_device returned by of_find_device_by_node() is not automatically released when the driver unprobes. Therefore, managed calls like devm_ioremap_resource() should not be used. Instead, we manually allocate the resources and then free them on driver release. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: emac: remove .owner field for driverWei Yongjun2016-09-161-1/+0Star
| | | | | | | | | Remove .owner field if calls are used which set it automatically. Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: emac: remove unnecessary dev_set_drvdata()Wei Yongjun2016-09-161-1/+0Star
| | | | | | | | | The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: emac: emac gigabit ethernet controller driverTimur Tabi2016-09-0211-0/+3857
| | | | | | | | | | | | | | | | | | Add support for the Qualcomm Technologies, Inc. EMAC gigabit Ethernet controller. This driver supports the following features: 1) Checksum offload. 2) Interrupt coalescing support. 3) SGMII phy. 4) phylib interface for external phy Based on original work by Niranjana Vishwanathapura <nvishwan@codeaurora.org> Gilad Avidov <gavidov@codeaurora.org> Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* treewide: replace dev->trans_start update with helperFlorian Westphal2016-05-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace all trans_start updates with netif_trans_update helper. change was done via spatch: struct net_device *d; @@ - d->trans_start = jiffies + netif_trans_update(d) Compile tested only. Cc: user-mode-linux-devel@lists.sourceforge.net Cc: linux-xtensa@linux-xtensa.org Cc: linux1394-devel@lists.sourceforge.net Cc: linux-rdma@vger.kernel.org Cc: netdev@vger.kernel.org Cc: MPT-FusionLinux.pdl@broadcom.com Cc: linux-scsi@vger.kernel.org Cc: linux-can@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-hams@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: b.a.t.m.a.n@lists.open-mesh.org Cc: linux-bluetooth@vger.kernel.org Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers: replace dev->trans_start accesses with dev_trans_startFlorian Westphal2016-05-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | a trans_start struct member exists twice: - in struct net_device (legacy) - in struct netdev_queue Instead of open-coding dev->trans_start usage to obtain the current trans_start value, use dev_trans_start() instead. This is not exactly the same, as dev_trans_start also considers the trans_start values of the netdev queues owned by the device and provides the most recent one. For legacy devices this doesn't matter as dev_trans_start can cope with netdev trans_start values of 0 (they are ignored). This is a prerequisite to eventual removal of dev->trans_start. Cc: linux-rdma@vger.kernel.org Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: qca_spi: clear IFF_TX_SKB_SHARINGStefan Wahren2016-02-251-0/+1
| | | | | | | | | ether_setup sets IFF_TX_SKB_SHARING but this is not supported by qca_spi as it modifies the skb on xmit. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Fixes: 291ab06ecf67 (net: qualcomm: new Ethernet over SPI driver for QCA7000) Signed-off-by: David S. Miller <davem@davemloft.net>
* net: qca_spi: Don't clear IFF_BROADCASTStefan Wahren2016-02-251-1/+0Star
| | | | | | | | | | Currently qcaspi_netdev_setup accidentally clears IFF_BROADCAST. So fix this by keeping the flags from ether_setup. Reported-by: Michael Heimpold <michael.heimpold@i2se.com> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Fixes: 291ab06ecf67 (net: qualcomm: new Ethernet over SPI driver for QCA7000) Signed-off-by: David S. Miller <davem@davemloft.net>
* net: qca_spi: fix transmit queue timeout handlingStefan Wahren2015-12-061-3/+2Star
| | | | | | | | | | | | In case of a tx queue timeout every transmit is blocked until the QCA7000 resets himself and triggers a sync which makes the driver flushs the tx ring. So avoid this blocking situation by triggering the sync immediately after the timeout. Waking the queue doesn't make sense in this situation. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000") Signed-off-by: David S. Miller <davem@davemloft.net>
* spi: Drop owner assignment from spi_driversAndrew F. Davis2015-10-281-1/+0Star
| | | | | | | | | An spi_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-10-14 13:22:27 +0200