summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/realtek
Commit message (Collapse)AuthorAgeFilesLines
* r8169: don't use MSI before RTL8168dHeiner Kallweit2019-07-271-2/+7
| | | | | | | | | | | | | | | | It was reported that after resuming from suspend network fails with error "do_IRQ: 3.38 No irq handler for vector", see [0]. Enabling WoL can work around the issue, but the only actual fix is to disable MSI. So let's mimic the behavior of the vendor driver and disable MSI on all chip versions before RTL8168d. [0] https://bugzilla.kernel.org/show_bug.cgi?id=204079 Fixes: 6c6aa15fdea5 ("r8169: improve interrupt handling") Reported-by: Dušan Dragić <dragic.dusan@gmail.com> Tested-by: Dušan Dragić <dragic.dusan@gmail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Revert ("r8169: remove 1000/Half from supported modes")Heiner Kallweit2019-07-271-4/+1Star
| | | | | | | | | | | | This reverts commit a6851c613fd7fccc5d1f28d5d8a0cbe9b0f4e8cc. It was reported that RTL8111b successfully finishes 1000/Full autoneg but no data flows. Reverting the original patch fixes the issue. It seems to be a HW issue with the integrated RTL8211B PHY. This PHY version used also e.g. on RTL8168d, so better revert the original patch. Reported-by: Bernhard Held <berny156@gmx.de> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: fix RTL8168g PHY initThomas Voegtle2019-07-201-2/+2
| | | | | | | | | | | This fixes a copy&paste error in the original patch. Setting the wrong register resulted in massive packet loss on some systems. Fixes: a2928d28643e ("r8169: use paged versions of phylib MDIO access functions") Tested-by: Thomas Voegtle <tv@lio96.de> Signed-off-by: Thomas Voegtle <tv@lio96.de> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: fix issue with confused RX unit after PHY power-down on RTL8411bHeiner Kallweit2019-07-141-0/+137
| | | | | | | | | | | | | | | | On RTL8411b the RX unit gets confused if the PHY is powered-down. This was reported in [0] and confirmed by Realtek. Realtek provided a sequence to fix the RX unit after PHY wakeup. The issue itself seems to have been there longer, the Fixes tag refers to where the fix applies properly. [0] https://bugzilla.redhat.com/show_bug.cgi?id=1692075 Fixes: a99790bf5c7f ("r8169: Reinstate ASPM Support") Tested-by: Ionut Radu <ionut.radu@gmail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: sync few chip names with vendor driverHeiner Kallweit2019-07-071-4/+4
| | | | | | | | This patch syncs the name of few chip versions with the latest vendor driver version. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: add random MAC address fallbackHeiner Kallweit2019-07-031-13/+27
| | | | | | | | | | It was reported that the GPD MicroPC is broken in a way that no valid MAC address can be read from the network chip. The vendor driver deals with this by assigning a random MAC address as fallback. So let's do the same. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Revert "r8169: improve handling VLAN tag"Heiner Kallweit2019-07-031-3/+2Star
| | | | | | | | | | | | | This reverts commit 759d095741721888b6ee51afa74e0a66ce65e974. The patch was based on a misunderstanding. As Al Viro pointed out [0] it's simply wrong on big endian. So let's revert it. [0] https://marc.info/?t=156200975600004&r=1&w=2 Reported-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: remove not needed call to dma_sync_single_for_deviceHeiner Kallweit2019-06-291-1/+0Star
| | | | | | | | | | | DMA_API_HOWTO.txt includes an example explaining when dma_sync_single_for_device() is not needed, and that example matches our use case. The buffer isn't changed by the CPU and direction is DMA_FROM_DEVICE, so we can remove the call to dma_sync_single_for_device(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: consider that 32 Bit DMA is the defaultHeiner Kallweit2019-06-291-8/+1Star
| | | | | | | | | | | | | Documentation/DMA-API-HOWTO.txt states: By default, the kernel assumes that your device can address 32-bits of DMA addressing. For a 64-bit capable device, this needs to be increased, and for a device with limitations, it needs to be decreased. Therefore we don't need the 32 Bit DMA fallback configuration and can remove it. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: improve handling VLAN tagHeiner Kallweit2019-06-291-2/+3
| | | | | | | | | The VLAN tag is stored in the descriptor in network byte order. Using swab16 works on little endian host systems only. Better play safe and use ntohs or htons respectively. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: don't activate ASPM in chip if OS can't control ASPMHeiner Kallweit2019-06-221-2/+6
| | | | | | | | | | | Certain chip version / board combinations have massive problems if ASPM is active. If BIOS enables ASPM and doesn't let OS control it, then we may have a problem with the current code. Therefore check the return code of pci_disable_link_state() and don't enable ASPM in the network chip if OS can't control ASPM. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: improve handling of Abit Fatal1ty F-190HDHeiner Kallweit2019-06-151-8/+6Star
| | | | | | | | | | | | The Abit Fatal1ty F-190HD has a PCI ID quirk and the entry marks this board as not GBit-capable, what is wrong. According to [0] the board has a RTL8111B that is GBit-capable, therefore remove the RTL_CFG_NO_GBIT flag. [0] https://www.centos.org/forums/viewtopic.php?t=23390 Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: use helper rtl_is_8168evl_up for setting register MaxTxPacketSizeHeiner Kallweit2019-06-141-20/+4Star
| | | | | | | | | >From RTL8168e-vl the value in register MaxTxPacketSize is interpreted differently, therefore use new helper rtl_is_8168evl_up to set this register. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: add helper rtl_is_8168evl_upHeiner Kallweit2019-06-141-17/+12Star
| | | | | | | | Add helper rtl_is_8168evl_up to make the code better readable and to simplify it. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: improve rtl_coalesce_infoHeiner Kallweit2019-06-141-15/+6Star
| | | | | | | | | tp->coalesce_info is used in rtl_coalesce_info() only, so we can remove this member. In addition replace phy_ethtool_get_link_ksettings with a direct access to tp->phydev->speed. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: let mdio read functions return -ETIMEDOUTHeiner Kallweit2019-06-141-4/+4
| | | | | | | | | | | | In case of a timeout currently ~0 is returned. Callers often just check whether a certain bit is set and therefore may behave incorrectly. So let's return -ETIMEDOUT in case of a timeout. r8168_phy_ocp_read is used in r8168g_mdio_read only, therefore we can apply the same change. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: remove struct rtl_cfg_infoHeiner Kallweit2019-06-101-37/+19Star
| | | | | | | | Simplify the code by removing struct rtl_cfg_info. Only info we need per PCI ID is whether it supports GBit or not. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: remove member coalesce_info from struct rtl_cfg_infoHeiner Kallweit2019-06-101-5/+5
| | | | | | | | To prepare removal of struct rtl_cfg_info, set the coalesce config based on the chip version number. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: remove callback hw_start from struct rtl_cfg_infoHeiner Kallweit2019-06-101-64/+53Star
| | | | | | | | | | After the latest changes we don't need separate functions rtl_hw_start_8168 and rtl_hw_start_8101 any longer. This allows us to simplify the code. For this change we need to move rtl_hw_start() and rtl_hw_start_8169(). rtl_hw_start_8169() is unchanged. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: rename CPCMD_QUIRK_MASK and apply it on all chip versionsHeiner Kallweit2019-06-101-19/+4Star
| | | | | | | | | CPCMD_QUIRK_MASK isn't specific to certain chip versions. The vendor driver applies this mask to all 8168 versions. Therefore remove QUIRK from the mask name and apply it on all chip versions. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: improve setting interrupt maskHeiner Kallweit2019-06-101-14/+14
| | | | | | | | | | So far several places in the code deal with setting the interrupt mask for the respective chip versions. Improve this by having one function for this only. In addition don't set RxFIFOOver for all 8101 chip versions like in the vendor driver. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: silence sparse warning in rtl8169_start_xmitHeiner Kallweit2019-06-061-1/+1
| | | | | | | | | | | | | | The opts[] array is of type u32. Therefore remove the wrong cpu_to_le32(). The opts[] array members are converted to little endian later when being assigned to the respective descriptor fields. This is not a new issue, it just popped up due to r8169.c having been renamed and more thoroughly checked. Due to the renaming this patch applies to net-next only. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: factor out firmware handlingHeiner Kallweit2019-06-054-241/+274
| | | | | | | | | Let's factor out firmware handling into a separate source code file. This simplifies reading the code and makes clearer what the interface between driver and firmware handling is. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: rename r8169.c to r8169_main.cHeiner Kallweit2019-06-052-0/+1
| | | | | | | | In preparation of factoring out firmware handling rename r8169.c to r8169_main.c. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: add rtl_fw_request_firmware and rtl_fw_release_firmwareHeiner Kallweit2019-06-041-24/+34
| | | | | | | | Add rtl_fw_request_firmware and rtl_fw_release_firmware which will be part of the API when factoring out the firmware handling code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: make rtl_fw_format_ok and rtl_fw_data_ok more independentHeiner Kallweit2019-06-041-39/+19Star
| | | | | | | | | In preparation of factoring out the firmware handling code avoid any usage of struct rtl8169_private internals. As part of it we can inline rtl_check_firmware. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: simplify rtl_fw_write_firmwareHeiner Kallweit2019-06-041-14/+5Star
| | | | | | | | Similar to rtl_fw_data_ok() we can simplify the code by moving incrementing the index to the for loop initialization. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: add enum rtl_fw_opcodeHeiner Kallweit2019-06-041-18/+18
| | | | | | | | | Replace the firmware opcode defines with a proper enum. The BUG() in rtl_fw_write_firmware() can be removed because the call to rtl_fw_data_ok() ensures all opcodes are valid. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: use paged versions of phylib MDIO access functionsHeiner Kallweit2019-06-041-72/+33Star
| | | | | | | | Use paged versions of phylib MDIO access functions to simplify the code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: avoid tso csum function indirectionHeiner Kallweit2019-06-031-25/+21Star
| | | | | | | | Replace indirect call to tso_csum with direct calls. To do this we have to move rtl_chip_supports_csum_v2(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: remove struct jumbo_opsHeiner Kallweit2019-06-031-60/+36Star
| | | | | | | | The jumbo_ops are used in just one place, so we can simplify the code and avoid the penalty of indirect calls in times of retpoline. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: remove struct mdio_opsHeiner Kallweit2019-06-031-33/+26Star
| | | | | | | | The mdio_ops are used in just one place, so we can simplify the code and avoid the penalty of indirect calls in times of retpoline. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: improve r8169_csum_workaroundHeiner Kallweit2019-06-031-5/+2Star
| | | | | | | Use helper skb_is_gso() and simplify access to tx_dropped. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2019-05-311-0/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | The phylink conflict was between a bug fix by Russell King to make sure we have a consistent PHY interface mode, and a change in net-next to pull some code in phylink_resolve() into the helper functions phylink_mac_link_{up,down}() On the dp83867 side it's mostly overlapping changes, with the 'net' side removing a condition that was supposed to trigger for RGMII but because of how it was coded never actually could trigger. Signed-off-by: David S. Miller <davem@davemloft.net>
| * r8169: fix MAC address being lost in PCI D3Heiner Kallweit2019-05-301-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | (At least) RTL8168e forgets its MAC address in PCI D3. To fix this set the MAC address when resuming. For resuming from runtime-suspend we had this in place already, for resuming from S3/S5 it was missing. The commit referenced as being fixed isn't wrong, it's just the first one where the patch applies cleanly. Fixes: 0f07bd850d36 ("r8169: use dev_get_drvdata where possible") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reported-by: Albert Astals Cid <aacid@kde.org> Tested-by: Albert Astals Cid <aacid@kde.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | r8169: decouple rtl_phy_write_fw from actual driver codeHeiner Kallweit2019-05-301-20/+28
| | | | | | | | | | | | | | | | | | | | | | This patch is a further step towards decoupling firmware handling from the actual driver code. Firmware can be for PHY and/or MAC, and two pairs of read/write functions are needed for handling PHY firmware and MAC firmware respectively. Pass these functions via struct rtl_fw and avoid the ugly switching of mdio_ops behind the back of rtl_writephy(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | r8169: improve rtl_fw_format_okHeiner Kallweit2019-05-301-14/+9Star
| | | | | | | | | | | | | | Simplify the function a little bit and use strscpy() where appropriate. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | r8169: enable WoL speed down on more chip versionsHeiner Kallweit2019-05-301-24/+2Star
| | | | | | | | | | | | | | | | | | Call the pll power down function also for chip versions 02..06 and 13..15. The MAC can't be powered down on these chip versions, but at least they benefit from the speed-down power-saving if WoL is enabled. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | r8169: remove 1000/Half from supported modesHeiner Kallweit2019-05-301-1/+4
| | | | | | | | | | | | | | | | | | | | MAC on the GBit versions supports 1000/Full only, however the PHY partially claims to support 1000/Half. So let's explicitly remove this mode. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* | r8169: remove support for RTL_GIGA_MAC_VER_01Heiner Kallweit2019-05-271-34/+9Star
| | | | | | | | | | | | | | | | | | | | RTL_GIGA_MAC_VER_01 is RTL8169, the ancestor of the chip family. It didn't have an internal PHY and I've never seen it in the wild. What isn't there doesn't need to be maintained, so let's remove support for it. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | r8169: improve RTL8168d PHY initializationHeiner Kallweit2019-05-271-101/+52Star
| | | | | | | | | | | | | | | | Certain parts of the PHY initialization are the same for sub versions 1 and 2 of RTL8168d. So let's factor this out to simplify the code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | r8169: change type of member mac_version in rtl8169_privateHeiner Kallweit2019-05-271-2/+6
| | | | | | | | | | | | | | | | Use the appropriate enum type for member mac_version. And don't assign a fixed value to RTL_GIGA_MAC_NONE, there's no benefit in it. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | r8169: remove unneeded return statement in rtl_hw_init_8168gHeiner Kallweit2019-05-271-2/+1Star
| | | | | | | | | | | | | | Remove not needed return statement. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | r8169: remove rtl_hw_init_8168epHeiner Kallweit2019-05-271-9/+3Star
|/ | | | | | | rtl_hw_init_8168ep() can be removed, this simplifies the code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2019-05-212-0/+2
| | | | | | | | | | | | | | Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* treewide: Add SPDX license identifier for more missed filesThomas Gleixner2019-05-211-0/+1
| | | | | | | | | | | | | | | | | Add SPDX license identifiers to all files which: - Have no license information of any form - Have MODULE_LICENCE("GPL*") inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'pci-v5.2-changes' of ↵Linus Torvalds2019-05-141-2/+1Star
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration changes: - Add _HPX Type 3 settings support, which gives firmware more influence over device configuration (Alexandru Gagniuc) - Support fixed bus numbers from bridge Enhanced Allocation capabilities (Subbaraya Sundeep) - Add "external-facing" DT property to identify cases where we require IOMMU protection against untrusted devices (Jean-Philippe Brucker) - Enable PCIe services for host controller drivers that use managed host bridge alloc (Jean-Philippe Brucker) - Log PCIe port service messages with pci_dev, not the pcie_device (Frederick Lawler) - Convert pciehp from pciehp_debug module parameter to generic dynamic debug (Frederick Lawler) Peer-to-peer DMA: - Add whitelist of Root Complexes that support peer-to-peer DMA between Root Ports (Christian König) Native controller drivers: - Add PCI host bridge DMA ranges for bridges that can't DMA everywhere, e.g., iProc (Srinath Mannam) - Add Amazon Annapurna Labs PCIe host controller driver (Jonathan Chocron) - Fix Tegra MSI target allocation so DMA doesn't generate unwanted MSIs (Vidya Sagar) - Fix of_node reference leaks (Wen Yang) - Fix Hyper-V module unload & device removal issues (Dexuan Cui) - Cleanup R-Car driver (Marek Vasut) - Cleanup Keystone driver (Kishon Vijay Abraham I) - Cleanup i.MX6 driver (Andrey Smirnov) Significant bug fixes: - Reset Lenovo ThinkPad P50 GPU so nouveau works after reboot (Lyude Paul) - Fix Switchtec firmware update performance issue (Wesley Sheng) - Work around Pericom switch link retraining erratum (Stefan Mätje)" * tag 'pci-v5.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (141 commits) MAINTAINERS: Add Karthikeyan Mitran and Hou Zhiqiang for Mobiveil PCI PCI: pciehp: Remove pointless MY_NAME definition PCI: pciehp: Remove pointless PCIE_MODULE_NAME definition PCI: pciehp: Remove unused dbg/err/info/warn() wrappers PCI: pciehp: Log messages with pci_dev, not pcie_device PCI: pciehp: Replace pciehp_debug module param with dyndbg PCI: pciehp: Remove pciehp_debug uses PCI/AER: Log messages with pci_dev, not pcie_device PCI/DPC: Log messages with pci_dev, not pcie_device PCI/PME: Replace dev_printk(KERN_DEBUG) with dev_info() PCI/AER: Replace dev_printk(KERN_DEBUG) with dev_info() PCI: Replace dev_printk(KERN_DEBUG) with dev_info(), etc PCI: Replace printk(KERN_INFO) with pr_info(), etc PCI: Use dev_printk() when possible PCI: Cleanup setup-bus.c comments and whitespace PCI: imx6: Allow asynchronous probing PCI: dwc: Save root bus for driver remove hooks PCI: dwc: Use devm_pci_alloc_host_bridge() to simplify code PCI: dwc: Free MSI in dw_pcie_host_init() error path PCI: dwc: Free MSI IRQ page in dw_pcie_free_msi() ...
| * r8169: use pci_dev_id() helperHeiner Kallweit2019-04-291-2/+1Star
| | | | | | | | | | | | | | | | Use new helper pci_dev_id() to simplify the code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: David S. Miller <davem@davemloft.net>
* | r8169: add rtl8168g_set_pause_thresholdsHeiner Kallweit2019-05-061-6/+11
| | | | | | | | | | | | | | | | Based on info from Realtek add a function for defining the thresholds controlling ethernet flow control. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | r8169: add rtl_set_fifo_sizeHeiner Kallweit2019-05-061-12/+16
| | | | | | | | | | | | | | | | Based on info from Realtek replace FIFO size config magic with a function. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-06-13 05:58:51 +0200