summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/renesas
Commit message (Collapse)AuthorAgeFilesLines
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2018-01-171-1/+1
|\ | | | | | | | | | | | | | | Overlapping changes all over. The mini-qdisc bits were a little bit tricky, however. Signed-off-by: David S. Miller <davem@davemloft.net>
| * sh_eth: fix dumping ARSTRSergei Shtylyov2018-01-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | ARSTR is always located at the start of the TSU register region, thus using add_reg() instead of add_tsu_reg() in __sh_eth_get_regs() to dump it causes EDMR or EDSR (depending on the register layout) to be dumped instead of ARSTR. Use the correct condition/macro there... Fixes: 6b4b4fead342 ("sh_eth: Implement ethtool register dump operations") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sh_eth: get Ether port # only when neededSergei Shtylyov2018-01-151-8/+5Star
| | | | | | | | | | | | | | | | | | | | | | The dual-port Ether configurations always have a shared TSU to e.g. pass the packets between those ports. With the TSU init. code gathered under the single *if*, we now can only get the port # from 'platform_device::id' only when we actually need it (and not recalculate it each time)... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sh_eth: gather all TSU init code in one placeSergei Shtylyov2018-01-151-7/+5Star
| | | | | | | | | | | | | | | | | | | | | | The sh_eth_cpu_data::chip_reset() method always resets using ARSTR and this register is always located at the start of the TSU register region. Therefore, we can only call this method if we know TSU is there and thus simplify the probing code a bit... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2018-01-091-7/+26
|\|
| * sh_eth: fix TXALCR1 offsetsSergei Shtylyov2018-01-081-2/+2
| | | | | | | | | | | | | | | | | | | | The TXALCR1 offsets are incorrect in the register offset tables, most probably due to copy&paste error. Luckily, the driver never uses this register. :-) Fixes: 4a55530f38e4 ("net: sh_eth: modify the definitions of register") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * sh_eth: fix SH7757 GEther initializationSergei Shtylyov2018-01-051-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Renesas SH7757 has 2 Fast and 2 Gigabit Ether controllers, while the 'sh_eth' driver can only reset and initialize TSU of the first controller pair. Shimoda-san tried to solve that adding the 'needs_init' member to the 'struct sh_eth_plat_data', however the platform code still never sets this flag. I think that we can infer this information from the 'devno' variable (set to 'platform_device::id') and reset/init the Ether controller pair only for an even 'devno'; therefore 'sh_eth_plat_data::needs_init' can be removed... Fixes: 150647fb2c31 ("net: sh_eth: change the condition of initialization") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * sh_eth: fix TSU resource handlingSergei Shtylyov2018-01-041-3/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When switching the driver to the managed device API, I managed to break the case of a dual Ether devices sharing a single TSU: the 2nd Ether port wouldn't probe. Iwamatsu-san has tried to fix this but his patch was buggy and he then dropped the ball... The solution is to limit calling devm_request_mem_region() to the first of the two ports sharing the same TSU, so devm_ioremap_resource() can't be used anymore for the TSU resource... Fixes: d5e07e69218f ("sh_eth: use managed device API") Reported-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sh_eth: kill redundant check in the probe() methodSergei Shtylyov2018-01-031-2/+1Star
| | | | | | | | | | | | | | | | | | | | | | Browsing thru the driver disassembly, I noticed that gcc was able to figure out that the 'ndev' pointer is always non-NULL when calling free_netdev() on the probe() method's error path and thus skip that redundant NULL check... gcc is smart, be like gcc! :-) Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ravb: kill redundant check in the probe() methodSergei Shtylyov2018-01-031-2/+1Star
|/ | | | | | | | | | | Browsing thru the driver disassembly, I noticed that gcc was able to figure out that the 'ndev' pointer is always non-NULL when calling free_netdev() on the probe() method's error path and thus skip that redundant NULL check... gcc is smart, be like gcc! :-) Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
* Revert "ravb: add workaround for clock when resuming with WoL enabled"Geert Uytterhoeven2017-12-131-25/+2Star
| | | | | | | | | | | | This reverts commit fbf3d034f2ff6264183cfa6845770e8cc2a986c8. As of commit 560869100b99a3da ("clk: renesas: cpg-mssr: Restore module clocks during resume"), the workaround is no longer needed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: sh_eth: do not advertise Gigabit capabilities when not availableThomas Petazzoni2017-12-111-0/+10
| | | | | | | | | | | | | | | | | Not all variants of the sh_eth hardware have Gigabit support. Unfortunately, the current driver doesn't tell the PHY about the limited MAC capabilities. Due to this, if you have a Gigabit capable PHY, the PHY will advertise its Gigabit capability and establish a link at 1Gbit/s, even though the MAC doesn't support it. In order to avoid this, we use the recently introduced phy_set_max_speed() to tell the PHY to not advertise speed higher than 100 MBit/s. Tested on a SH7786 platform, with a Gigabit PHY. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: sh_eth: don't use NULL as "struct device" for the DMA mapping APIThomas Petazzoni2017-12-051-6/+6
| | | | | | | | | | | | Using NULL as argument for the DMA mapping API is bogus, as the DMA mapping API may use information from the "struct device" to perform the DMA mapping operation. Therefore, pass the appropriate "struct device". Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: sh_eth: use correct "struct device" when calling DMA mapping functionsThomas Petazzoni2017-12-051-9/+10
| | | | | | | | | | | | | | | | | | | | | | | There are two types of "struct device": the one representing the physical device on its physical bus (platform, SPI, PCI, etc.), and the one representing the logical device in its device class (net, etc.). The DMA mapping API expects to receive as argument a "struct device" representing the physical device, as the "struct device" contains information about the bus that the DMA API needs. However, the sh_eth driver mistakenly uses the "struct device" representing the logical device (embedded in "struct net_device") rather than the "struct device" representing the physical device on its bus. This commit fixes that by adjusting all calls to the DMA mapping API. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: sh_eth: implement R-Car Gen[12] fallback compatibility stringsSimon Horman2017-10-201-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Implement fallback compatibility strings for R-Car Gen 1 and 2. In the case of Renesas R-Car hardware we know that there are generations of SoCs, f.e. Gen 1 and 2. But beyond that its not clear what the relationship between IP blocks might be. For example, I believe that r8a7790 is older than r8a7791 but that doesn't imply that the latter is a descendant of the former or vice versa. We can, however, by examining the documentation and behaviour of the hardware at run-time observe that the current driver implementation appears to be compatible with the IP blocks on SoCs within a given generation. For the above reasons and convenience when enabling new SoCs a per-generation fallback compatibility string scheme is being adopted for drivers for Renesas SoCs. Note that R-Car Gen2 and RZ/G1 have many compatible IP blocks. The approach that has been consistently taken for other IP blocks is to name common code, compatibility strings and so on after R-Car Gen2. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: sh_eth: rename name structures as rcar_gen[12]_*Simon Horman2017-10-201-15/+15
| | | | | | | | | | | | | | | | | | | | | | Rename structures describing R-Car SoCs as rcar_gen[12]_* rather than r8a77[79]x_*. This seems a little easier on the eyes. And will make things slightly cleaner in a follow-up patch that adds fallback-compatibility strings for these SoCs. Note that R-Car Gen2 and RZ/G1 have many compatible IP blocks. The approach that has been consistently taken for other IP blocks is to name common code, compatibility strings and so on after R-Car Gen2. Also rename sh_eth_set_rate_r8a777x as sh_eth_set_rate_rcar as it it is used by the R-Car generations supported by the driver. This patch should have no run-time effect and is compile-tested only. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ravb: Consolidate clock handlingGeert Uytterhoeven2017-10-131-25/+10Star
| | | | | | | | | | | | | | | The module clock is used for two purposes: - Wake-on-LAN (WoL), which is optional, - gPTP Timer Increment (GTI) configuration, which is mandatory. As the clock is needed for GTI configuration anyway, WoL is always available. Hence remove duplication and repeated obtaining of the clock by making GTI use the stored clock for WoL use. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ravb: RX checksum offloadSimon Horman2017-10-041-1/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for RX checksum offload. This is enabled by default and may be disabled and re-enabled using ethtool: # ethtool -K eth0 rx off # ethtool -K eth0 rx on The RAVB provides a simple checksumming scheme which appears to be completely compatible with CHECKSUM_COMPLETE: sum of all packet data after the L2 header is appended to packet data; this may be trivially read by the driver and used to update the skb accordingly. In terms of performance throughput is close to gigabit line-rate both with and without RX checksum offload enabled. Perf output, however, appears to indicate that significantly less time is spent in do_csum(). This is as expected. Test results with RX checksum offload enabled: # /usr/bin/perf_3.16 record -o /run/perf.data -a netperf -t TCP_MAERTS -H 10.4.3.162 MIGRATED TCP MAERTS TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.4.3.162 () port 0 AF_INET : demo enable_enobufs failed: getprotobyname Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 10.00 937.54 Summary of output of perf report: 18.28% ksoftirqd/0 [kernel.kallsyms] [k] _raw_spin_unlock_irqrestore 10.34% ksoftirqd/0 [kernel.kallsyms] [k] __pi_memcpy 9.83% ksoftirqd/0 [kernel.kallsyms] [k] ravb_poll 7.89% ksoftirqd/0 [kernel.kallsyms] [k] skb_put 4.01% ksoftirqd/0 [kernel.kallsyms] [k] dev_gro_receive 3.37% netperf [kernel.kallsyms] [k] __arch_copy_to_user 3.17% swapper [kernel.kallsyms] [k] arch_cpu_idle 2.55% swapper [kernel.kallsyms] [k] tick_nohz_idle_enter 2.04% ksoftirqd/0 [kernel.kallsyms] [k] __pi___inval_dcache_area 2.03% swapper [kernel.kallsyms] [k] _raw_spin_unlock_irq 1.96% ksoftirqd/0 [kernel.kallsyms] [k] __netdev_alloc_skb 1.59% ksoftirqd/0 [kernel.kallsyms] [k] __slab_alloc.isra.83 Test results without RX checksum offload enabled: # /usr/bin/perf_3.16 record -o /run/perf.data -a netperf -t TCP_MAERTS -H 10.4.3.162 MIGRATED TCP MAERTS TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.4.3.162 () port 0 AF_INET : demo enable_enobufs failed: getprotobyname Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 10.00 940.20 Summary of output of perf report: 17.10% ksoftirqd/0 [kernel.kallsyms] [k] _raw_spin_unlock_irqrestore 10.99% ksoftirqd/0 [kernel.kallsyms] [k] __pi_memcpy 8.87% ksoftirqd/0 [kernel.kallsyms] [k] ravb_poll 8.16% ksoftirqd/0 [kernel.kallsyms] [k] skb_put 7.42% ksoftirqd/0 [kernel.kallsyms] [k] do_csum 3.91% ksoftirqd/0 [kernel.kallsyms] [k] dev_gro_receive 2.31% swapper [kernel.kallsyms] [k] arch_cpu_idle 2.16% ksoftirqd/0 [kernel.kallsyms] [k] __pi___inval_dcache_area 2.14% ksoftirqd/0 [kernel.kallsyms] [k] __netdev_alloc_skb 1.93% netperf [kernel.kallsyms] [k] __arch_copy_to_user 1.79% swapper [kernel.kallsyms] [k] tick_nohz_idle_enter 1.63% ksoftirqd/0 [kernel.kallsyms] [k] __slab_alloc.isra.83 Above results collected on an R-Car Gen 3 Salvator-X/r8a7796 ES1.0. Also tested on a R-Car Gen 3 Salvator-X/r8a7795 ES1.0. By inspection this also appears to be compatible with the ravb found on R-Car Gen 2 SoCs, however, this patch is currently untested on such hardware. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: sh_eth: constify platform_device_idArvind Yadav2017-08-141-1/+1
| | | | | | | | | | platform_device_id are not supposed to change at runtime. All functions working with platform_device_id provided by <linux/platform_device.h> work with const platform_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ravb: add workaround for clock when resuming with WoL enabledNiklas Söderlund2017-08-021-2/+25
| | | | | | | | | | | | | | | | | | The renesas-cpg-mssr clock driver are not yet aware of PSCI sleep where power is cut to the SoC. When resuming from this state with WoL enabled the enable count of the ravb clock is 1 and the clock driver thinks the clock is already on when PM core enables the clock and increments the enable count to 2. This will result in the ravb driver failing to talk to the hardware since the module clock is off. Work around this by forcing the enable count to 0 and then back to 2 when resuming with WoL enabled. This workaround should be reverted once the renesas-cpg-mssr clock driver becomes aware of this PSCI sleep behavior. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ravb: add wake-on-lan support via magic packetNiklas Söderlund2017-08-022-4/+106
| | | | | | | | | | | | | | | | | | | | | | WoL is enabled in the suspend callback by setting MagicPacket detection and disabling all interrupts expect MagicPacket. In the resume path the driver needs to reset the hardware to rearm the WoL logic, this prevents the driver from simply restoring the registers and to take advantage of that ravb was not suspended to reduce resume time. To reset the hardware the driver closes the device, sets it in reset mode and reopens the device just like it would do in a normal suspend/resume scenario without WoL enabled, but it both closes and opens the device in the resume callback since the device needs to be reset for WoL to work. One quirk needed for WoL is that the module clock needs to be prevented from being switched off by Runtime PM. To keep the clock alive the suspend callback need to call clk_enable() directly to increase the usage count of the clock. Then when Runtime PM decreases the clock usage count it won't reach 0 and be switched off. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: Make phy_ethtool_ksettings_get return voidyuval.shaia@oracle.com2017-06-132-10/+9Star
| | | | | | | | Make return value void since function never return meaningfull value Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sh_eth: add support for changing MTUNiklas Söderlund2017-06-121-0/+20
| | | | | | | | | | The hardware supports the MTU to be changed and the driver it self is somewhat prepared to support this. This patch hooks up the callbacks to be able to change the MTU from user-space. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ravb: Fix use-after-free on `ifconfig eth0 down`Eugeniu Rosca2017-06-061-12/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit a47b70ea86bd ("ravb: unmap descriptors when freeing rings") has introduced the issue seen in [1] reproduced on H3ULCB board. Fix this by relocating the RX skb ringbuffer free operation, so that swiotlb page unmapping can be done first. Freeing of aligned TX buffers is not relevant to the issue seen in [1]. Still, reposition TX free calls as well, to have all kfree() operations performed consistently _after_ dma_unmap_*()/dma_free_*(). [1] Console screenshot with the problem reproduced: salvator-x login: root root@salvator-x:~# ifconfig eth0 up Micrel KSZ9031 Gigabit PHY e6800000.ethernet-ffffffff:00: \ attached PHY driver [Micrel KSZ9031 Gigabit PHY] \ (mii_bus:phy_addr=e6800000.ethernet-ffffffff:00, irq=235) IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready root@salvator-x:~# root@salvator-x:~# ifconfig eth0 down ================================================================== BUG: KASAN: use-after-free in swiotlb_tbl_unmap_single+0xc4/0x35c Write of size 1538 at addr ffff8006d884f780 by task ifconfig/1649 CPU: 0 PID: 1649 Comm: ifconfig Not tainted 4.12.0-rc4-00004-g112eb07287d1 #32 Hardware name: Renesas H3ULCB board based on r8a7795 (DT) Call trace: [<ffff20000808f11c>] dump_backtrace+0x0/0x3a4 [<ffff20000808f4d4>] show_stack+0x14/0x1c [<ffff20000865970c>] dump_stack+0xf8/0x150 [<ffff20000831f8b0>] print_address_description+0x7c/0x330 [<ffff200008320010>] kasan_report+0x2e0/0x2f4 [<ffff20000831eac0>] check_memory_region+0x20/0x14c [<ffff20000831f054>] memcpy+0x48/0x68 [<ffff20000869ed50>] swiotlb_tbl_unmap_single+0xc4/0x35c [<ffff20000869fcf4>] unmap_single+0x90/0xa4 [<ffff20000869fd14>] swiotlb_unmap_page+0xc/0x14 [<ffff2000080a2974>] __swiotlb_unmap_page+0xcc/0xe4 [<ffff2000088acdb8>] ravb_ring_free+0x514/0x870 [<ffff2000088b25dc>] ravb_close+0x288/0x36c [<ffff200008aaf8c4>] __dev_close_many+0x14c/0x174 [<ffff200008aaf9b4>] __dev_close+0xc8/0x144 [<ffff200008ac2100>] __dev_change_flags+0xd8/0x194 [<ffff200008ac221c>] dev_change_flags+0x60/0xb0 [<ffff200008ba2dec>] devinet_ioctl+0x484/0x9d4 [<ffff200008ba7b78>] inet_ioctl+0x190/0x194 [<ffff200008a78c44>] sock_do_ioctl+0x78/0xa8 [<ffff200008a7a128>] sock_ioctl+0x110/0x3c4 [<ffff200008365a70>] vfs_ioctl+0x90/0xa0 [<ffff200008365dbc>] do_vfs_ioctl+0x148/0xc38 [<ffff2000083668f0>] SyS_ioctl+0x44/0x74 [<ffff200008083770>] el0_svc_naked+0x24/0x28 The buggy address belongs to the page: page:ffff7e001b6213c0 count:0 mapcount:0 mapping: (null) index:0x0 flags: 0x4000000000000000() raw: 4000000000000000 0000000000000000 0000000000000000 00000000ffffffff raw: 0000000000000000 ffff7e001b6213e0 0000000000000000 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8006d884f680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff8006d884f700: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >ffff8006d884f780: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff8006d884f800: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff8006d884f880: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ================================================================== Disabling lock debugging due to kernel taint root@salvator-x:~# Fixes: a47b70ea86bd ("ravb: unmap descriptors when freeing rings") Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sh_eth: Do not print an error message for probe deferralGeert Uytterhoeven2017-05-181-1/+2
| | | | | | | | | | | | | | | EPROBE_DEFER is not an error, hence printing an error message like sh-eth ee700000.ethernet: failed to initialise MDIO may confuse the user. To fix this, suppress the error message in case of probe deferral. While at it, shorten the message, and add the actual error code. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sh_eth: Use platform device for printing before register_netdev()Geert Uytterhoeven2017-05-181-1/+1
| | | | | | | | | | | | | | | | The MDIO initialization failure message is printed using the network device, before it has been registered, leading to: (null): failed to initialise MDIO Use the platform device instead to fix this: sh-eth ee700000.ethernet: failed to initialise MDIO Fixes: daacf03f0bbfefee ("sh_eth: Register MDIO bus before registering the network device") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ravb: Double free on error in ravb_start_xmit()Dan Carpenter2017-04-241-3/+4
| | | | | | | | | | If skb_put_padto() fails then it frees the skb. I shifted that code up a bit to make my error handling a little simpler. Fixes: a0d2f20650e8 ("Renesas Ethernet AVB PTP clock driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sh_eth: unmap DMA buffers when freeing ringsSergei Shtylyov2017-04-191-55/+67
| | | | | | | | | | | | | | | | | | | | | The DMA API debugging (when enabled) causes: WARNING: CPU: 0 PID: 1445 at lib/dma-debug.c:519 add_dma_entry+0xe0/0x12c DMA-API: exceeded 7 overlapping mappings of cacheline 0x01b2974d to be printed after repeated initialization of the Ether device, e.g. suspend/resume or 'ifconfig' up/down. This is because DMA buffers mapped using dma_map_single() in sh_eth_ring_format() and sh_eth_start_xmit() are never unmapped. Resolve this problem by unmapping the buffers when freeing the descriptor rings; in order to do it right, we'd have to add an extra parameter to sh_eth_txfree() (we rename this function to sh_eth_tx_free(), while at it). Based on the commit a47b70ea86bd ("ravb: unmap descriptors when freeing rings"). Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sh_eth: fix wakeup event reporting from MagicPacketNiklas Söderlund2017-02-011-2/+2
| | | | | | | | | | | | If a link change interrupt happens along side the MagicPacket interrupt and the link change interrupt is ignored the interrupt handler will return and the wakeup event is not registered. Fix this by moving the MagicPacket check before the link change check. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sh_eth: align usage of sh_eth_modify() with rest of driverNiklas Söderlund2017-02-011-1/+1
| | | | | | | | | | | To be consistent with the rest of the driver when setting bits using sh_eth_modify() the same bit should also be cleared. This have no functional change and should have been done from the start. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Suggested-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sh_eth: stop using bare numbers for EESIPR valuesSergei Shtylyov2017-01-311-11/+80
| | | | | | | | | | | Now that we have almost all EESIPR bits declared (and those that are still not are most probably reserved anyway) we can at last replace the bare numbers used for 'sh_eth_cpu_data::eesipr_value' initializers with the bit names ORed together... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
* sh_eth: add missing EESIPR bitsSergei Shtylyov2017-01-311-2/+8
| | | | | | | | | | | Renesas SH77{34|63} manuals describe more EESIPR bits than the current driver. Declare the new bits with the end goal of using the bit names instead of the bare numbers for the 'sh_eth_cpu_data::eesipr_value' initializers... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
* sh_eth: rename EESIPR bitsSergei Shtylyov2017-01-312-24/+34
| | | | | | | | | | | | | Since the commit b0ca2a21f769 ("sh_eth: Add support of SH7763 to sh_eth") the *enum* declaring the EESIPR bits (interrupt mask) went out of sync with the *enum* declaring the EESR bits (interrupt status) WRT bit naming and formatting. I'd like to restore the consistency by using EESIPR as the bit name prefix, renaming the *enum* to EESIPR_BIT, and (finally) renaming the bits according to the available Renesas SH77{34|63} manuals; additionally, reconstruct couple names using the EESR bit declaration above... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ravb: Support 1Gbps on R-Car H3 ES1.1+ and R-Car M3-WGeert Uytterhoeven2017-01-301-2/+8
| | | | | | | | | | | The limitation to 10/100Mbit speeds on R-Car Gen3 is valid for R-Car H3 ES1.0 only. Check for the exact SoC model to allow 1Gbps on newer revisions of R-Car H3, and on R-Car M3-W. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ravb: Add tx and rx clock internal delays mode of APSRKazuya Mizuguchi2017-01-302-0/+33
| | | | | | | | | | | | | | | | | | | | | | This patch enables tx and rx clock internal delay modes (TDM and RDM). This is to address a failure in the case of 1Gbps communication using the by salvator-x board with the KSZ9031RNX phy. This has been reported to occur with both the r8a7795 (H3) and r8a7796 (M3-W) SoCs. With this change APSR internal delay modes are enabled for "rgmii-id", "rgmii-rxid" and "rgmii-txid" phy modes as follows: phy mode | ASPR delay mode -----------+---------------- rgmii-id | TDM and RDM rgmii-rxid | RDM rgmii-txid | TDM Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2017-01-281-48/+64
|\ | | | | | | | | | | Two trivial overlapping changes conflicts in MPLS and mlx5. Signed-off-by: David S. Miller <davem@davemloft.net>
| * ravb: unmap descriptors when freeing ringsKazuya Mizuguchi2017-01-271-48/+64
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | "swiotlb buffer is full" errors occur after repeated initialisation of a device - f.e. suspend/resume or ip link set up/down. This is because memory mapped using dma_map_single() in ravb_ring_format() and ravb_start_xmit() is not released. Resolve this problem by unmapping descriptors when freeing rings. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> [simon: reworked] Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2017-01-171-6/+15
|\|
| * ravb: do not use zero-length alignment DMA descriptorMasaru Nagai2017-01-161-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Due to alignment requirements of the hardware transmissions are split into two DMA descriptors, a small padding descriptor of 0 - 3 bytes in length followed by a descriptor for rest of the packet. In the case of IP packets the first descriptor will never be zero due to the way that the stack aligns buffers for IP packets. However, for non-IP packets it may be zero. In that case it has been reported that timeouts occur, presumably because transmission stops at the first zero-length DMA descriptor and thus the packet is not transmitted. However, in my environment a BUG is triggered as follows: [ 20.381417] ------------[ cut here ]------------ [ 20.386054] kernel BUG at lib/swiotlb.c:495! [ 20.390324] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 20.395805] Modules linked in: [ 20.398862] CPU: 0 PID: 2089 Comm: mz Not tainted 4.10.0-rc3-00001-gf13ad2db193f #162 [ 20.406689] Hardware name: Renesas Salvator-X board based on r8a7796 (DT) [ 20.413474] task: ffff80063b1f1900 task.stack: ffff80063a71c000 [ 20.419404] PC is at swiotlb_tbl_map_single+0x178/0x2ec [ 20.424625] LR is at map_single+0x4c/0x98 [ 20.428629] pc : [<ffff00000839c4c0>] lr : [<ffff00000839c680>] pstate: 800001c5 [ 20.436019] sp : ffff80063a71f9b0 [ 20.439327] x29: ffff80063a71f9b0 x28: ffff80063a20d500 [ 20.444636] x27: ffff000008ed5000 x26: 0000000000000000 [ 20.449944] x25: 000000067abe2adc x24: 0000000000000000 [ 20.455252] x23: 0000000000200000 x22: 0000000000000001 [ 20.460559] x21: 0000000000175ffe x20: ffff80063b2a0010 [ 20.465866] x19: 0000000000000000 x18: 0000ffffcae6fb20 [ 20.471173] x17: 0000ffffa09ba018 x16: ffff0000087c8b70 [ 20.476480] x15: 0000ffffa084f588 x14: 0000ffffa09cfa14 [ 20.481787] x13: 0000ffffcae87ff0 x12: 000000000063abe2 [ 20.487098] x11: ffff000008096360 x10: ffff80063abe2adc [ 20.492407] x9 : 0000000000000000 x8 : 0000000000000000 [ 20.497718] x7 : 0000000000000000 x6 : ffff000008ed50d0 [ 20.503028] x5 : 0000000000000000 x4 : 0000000000000001 [ 20.508338] x3 : 0000000000000000 x2 : 000000067abe2adc [ 20.513648] x1 : 00000000bafff000 x0 : 0000000000000000 [ 20.518958] [ 20.520446] Process mz (pid: 2089, stack limit = 0xffff80063a71c000) [ 20.526798] Stack: (0xffff80063a71f9b0 to 0xffff80063a720000) [ 20.532543] f9a0: ffff80063a71fa30 ffff00000839c680 [ 20.540374] f9c0: ffff80063b2a0010 ffff80063b2a0010 0000000000000001 0000000000000000 [ 20.548204] f9e0: 000000000000006e ffff80063b23c000 ffff80063b23c000 0000000000000000 [ 20.556034] fa00: ffff80063b23c000 ffff80063a20d500 000000013b1f1900 0000000000000000 [ 20.563864] fa20: ffff80063ffd18e0 ffff80063b2a0010 ffff80063a71fa60 ffff00000839cd10 [ 20.571694] fa40: ffff80063b2a0010 0000000000000000 ffff80063ffd18e0 000000067abe2adc [ 20.579524] fa60: ffff80063a71fa90 ffff000008096380 ffff80063b2a0010 0000000000000000 [ 20.587353] fa80: 0000000000000000 0000000000000001 ffff80063a71fac0 ffff00000864f770 [ 20.595184] faa0: ffff80063b23caf0 0000000000000000 0000000000000000 0000000000000140 [ 20.603014] fac0: ffff80063a71fb60 ffff0000087e6498 ffff80063a20d500 ffff80063b23c000 [ 20.610843] fae0: 0000000000000000 ffff000008daeaf0 0000000000000000 ffff000008daeb00 [ 20.618673] fb00: ffff80063a71fc0c ffff000008da7000 ffff80063b23c090 ffff80063a44f000 [ 20.626503] fb20: 0000000000000000 ffff000008daeb00 ffff80063a71fc0c ffff000008da7000 [ 20.634333] fb40: ffff80063b23c090 0000000000000000 ffff800600000037 ffff0000087e63d8 [ 20.642163] fb60: ffff80063a71fbc0 ffff000008807510 ffff80063a692400 ffff80063a20d500 [ 20.649993] fb80: ffff80063a44f000 ffff80063b23c000 ffff80063a69249c 0000000000000000 [ 20.657823] fba0: 0000000000000000 ffff80063a087800 ffff80063b23c000 ffff80063a20d500 [ 20.665653] fbc0: ffff80063a71fc10 ffff0000087e67dc ffff80063a20d500 ffff80063a692400 [ 20.673483] fbe0: ffff80063b23c000 0000000000000000 ffff80063a44f000 ffff80063a69249c [ 20.681312] fc00: ffff80063a5f1a10 000000103a087800 ffff80063a71fc70 ffff0000087e6b24 [ 20.689142] fc20: ffff80063a5f1a80 ffff80063a71fde8 000000000000000f 00000000000005ea [ 20.696972] fc40: ffff80063a5f1a10 0000000000000000 000000000000000f ffff00000887fbd0 [ 20.704802] fc60: fffffff43a5f1a80 0000000000000000 ffff80063a71fc80 ffff000008880240 [ 20.712632] fc80: ffff80063a71fd90 ffff0000087c7a34 ffff80063afc7180 0000000000000000 [ 20.720462] fca0: 0000ffffcae6fe18 0000000000000014 0000000060000000 0000000000000015 [ 20.728292] fcc0: 0000000000000123 00000000000000ce ffff0000088d2000 ffff80063b1f1900 [ 20.736122] fce0: 0000000000008933 ffff000008e7cb80 ffff80063a71fd80 ffff0000087c50a4 [ 20.743951] fd00: 0000000000008933 ffff000008e7cb80 ffff000008e7cb80 000000100000000e [ 20.751781] fd20: ffff80063a71fe4c 0000ffff00000300 0000000000000123 0000000000000000 [ 20.759611] fd40: 0000000000000000 ffff80063b1f0000 000000000000000e 0000000000000300 [ 20.767441] fd60: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 20.775271] fd80: 0000000000000000 0000000000000000 ffff80063a71fda0 ffff0000087c8c20 [ 20.783100] fda0: 0000000000000000 ffff000008082f30 0000000000000000 0000800637260000 [ 20.790930] fdc0: ffffffffffffffff 0000ffffa0903078 0000000000000000 000000001ea87232 [ 20.798760] fde0: 000000000000000f ffff80063a71fe40 ffff800600000014 ffff000000000001 [ 20.806590] fe00: 0000000000000000 0000000000000000 ffff80063a71fde8 0000000000000000 [ 20.814420] fe20: 0000000000000000 0000000000000000 0000000000000000 0000000000000001 [ 20.822249] fe40: 0000000203000011 0000000000000000 0000000000000000 ffff80063a68aa00 [ 20.830079] fe60: ffff80063a68aa00 0000000000000003 0000000000008933 ffff0000081f1b9c [ 20.837909] fe80: 0000000000000000 ffff000008082f30 0000000000000000 0000800637260000 [ 20.845739] fea0: ffffffffffffffff 0000ffffa07ca81c 0000000060000000 0000000000000015 [ 20.853569] fec0: 0000000000000003 000000001ea87232 000000000000000f 0000000000000000 [ 20.861399] fee0: 0000ffffcae6fe18 0000000000000014 0000000000000300 0000000000000000 [ 20.869228] ff00: 00000000000000ce 0000000000000000 00000000ffffffff 0000000000000000 [ 20.877059] ff20: 0000000000000002 0000ffffcae87ff0 0000ffffa09cfa14 0000ffffa084f588 [ 20.884888] ff40: 0000000000000000 0000ffffa09ba018 0000ffffcae6fb20 000000001ea87010 [ 20.892718] ff60: 0000ffffa09b9000 0000ffffcae6fe30 0000ffffcae6fe18 000000000000000f [ 20.900548] ff80: 0000000000000003 000000001ea87232 0000000000000000 0000000000000000 [ 20.908378] ffa0: 0000000000000000 0000ffffcae6fdc0 0000ffffa09a7824 0000ffffcae6fdc0 [ 20.916208] ffc0: 0000ffffa0903078 0000000060000000 0000000000000003 00000000000000ce [ 20.924038] ffe0: 0000000000000000 0000000000000000 ffffffffffffffff ffffffffffffffff [ 20.931867] Call trace: [ 20.934312] Exception stack(0xffff80063a71f7e0 to 0xffff80063a71f910) [ 20.940750] f7e0: 0000000000000000 0001000000000000 ffff80063a71f9b0 ffff00000839c4c0 [ 20.948580] f800: ffff80063a71f840 ffff00000888a6e4 ffff80063a24c418 ffff80063a24c448 [ 20.956410] f820: 0000000000000000 ffff00000811cd54 ffff80063a71f860 ffff80063a24c458 [ 20.964240] f840: ffff80063a71f870 ffff00000888b258 ffff80063a24c418 0000000000000001 [ 20.972070] f860: ffff80063a71f910 ffff80063a7b7028 ffff80063a71f890 ffff0000088825e4 [ 20.979899] f880: 0000000000000000 00000000bafff000 000000067abe2adc 0000000000000000 [ 20.987729] f8a0: 0000000000000001 0000000000000000 ffff000008ed50d0 0000000000000000 [ 20.995560] f8c0: 0000000000000000 0000000000000000 ffff80063abe2adc ffff000008096360 [ 21.003390] f8e0: 000000000063abe2 0000ffffcae87ff0 0000ffffa09cfa14 0000ffffa084f588 [ 21.011219] f900: ffff0000087c8b70 0000ffffa09ba018 [ 21.016097] [<ffff00000839c4c0>] swiotlb_tbl_map_single+0x178/0x2ec [ 21.022362] [<ffff00000839c680>] map_single+0x4c/0x98 [ 21.027411] [<ffff00000839cd10>] swiotlb_map_page+0xa4/0x138 [ 21.033072] [<ffff000008096380>] __swiotlb_map_page+0x20/0x7c [ 21.038821] [<ffff00000864f770>] ravb_start_xmit+0x174/0x668 [ 21.044484] [<ffff0000087e6498>] dev_hard_start_xmit+0x8c/0x120 [ 21.050407] [<ffff000008807510>] sch_direct_xmit+0x108/0x1a0 [ 21.056064] [<ffff0000087e67dc>] __dev_queue_xmit+0x194/0x4cc [ 21.061807] [<ffff0000087e6b24>] dev_queue_xmit+0x10/0x18 [ 21.067214] [<ffff000008880240>] packet_sendmsg+0xf40/0x1220 [ 21.072873] [<ffff0000087c7a34>] sock_sendmsg+0x18/0x2c [ 21.078097] [<ffff0000087c8c20>] SyS_sendto+0xb0/0xf0 [ 21.083150] [<ffff000008082f30>] el0_svc_naked+0x24/0x28 [ 21.088462] Code: d34bfef7 2a1803f3 1a9f86d6 35fff878 (d4210000) [ 21.094611] ---[ end trace 5bc544ad491f3814 ]--- [ 21.099234] Kernel panic - not syncing: Fatal exception in interrupt [ 21.105587] Kernel Offset: disabled [ 21.109073] Memory Limit: none [ 21.112126] ---[ end Kernel panic - not syncing: Fatal exception in interrupt Fixes: 2f45d1902acf ("ravb: minimize TX data copying") Signed-off-by: Masaru Nagai <masaru.nagai.vx@renesas.com Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ravb: Remove Rx overflow log messagesKazuya Mizuguchi2017-01-121-6/+2Star
| | | | | | | | | | | | | | | | | | | | | | | | Remove Rx overflow log messages as in an environment where logging results in network traffic logging may cause further overflows. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> [simon: reworked changelog] Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sh_eth: enable wake-on-lan for sh7763Niklas Söderlund2017-01-091-0/+1
| | | | | | | | | | | | | | | | This is based on public datasheet for sh7763 which shows it has the same behavior and registers for WoL as other versions of sh_eth. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sh_eth: enable wake-on-lan for sh7734Niklas Söderlund2017-01-091-0/+1
| | | | | | | | | | | | | | | | This is based on public datasheet for sh7734 which shows it has the same behavior and registers for WoL as other versions of sh_eth. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sh_eth: enable wake-on-lan for r8a7740/armadilloNiklas Söderlund2017-01-091-0/+1
| | | | | | | | | | | | | | | | Geert Uytterhoeven reported WoL worked on his Armadillo board. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sh_eth: enable wake-on-lan for R-Car Gen2 devicesNiklas Söderlund2017-01-091-2/+4
| | | | | | | | | | | | | | | | Tested on Gen2 r8a7791/Koelsch. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sh_eth: add generic wake-on-lan support via magic packetNiklas Söderlund2017-01-092-8/+109
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add generic functionality to support Wake-on-LAN using MagicPacket which are supported by at least a few versions of sh_eth. Only add functionality for WoL, no specific sh_eth versions are marked to support WoL yet. WoL is enabled in the suspend callback by setting MagicPacket detection and disabling all interrupts expect MagicPacket. In the resume path the driver needs to reset the hardware to rearm the WoL logic, this prevents the driver from simply restoring the registers and to take advantage of that sh_eth was not suspended to reduce resume time. To reset the hardware the driver closes and reopens the device just like it would do in a normal suspend/resume scenario without WoL enabled, but it both closes and opens the device in the resume callback since the device needs to be open for WoL to work. One quirk needed for WoL is that the module clock needs to be prevented from being switched off by Runtime PM. To keep the clock alive the suspend callback need to call clk_enable() directly to increase the usage count of the clock. Then when Runtime PM decreases the clock usage count it won't reach 0 and be switched off. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sh_eth: use correct name for ECMR_MPDE bitNiklas Söderlund2017-01-091-1/+1
| | | | | | | | | | | | | | | | | | This bit was wrongly named due to a typo, Sergei checked the SH7734/63 manuals and this bit should be named MPDE. Suggested-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sh_eth: rename 'sh_eth_cpu_data::hw_crc'Sergei Shtylyov2017-01-092-7/+7
| | | | | | | | | | | | | | | | The 'struct sh_eth_cpu_data' field indicating the "intelligent checksum" support was misnamed 'hw_crc' -- rename it to 'hw_checksum'. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sh_eth: get rid of 'sh_eth_cpu_data::shift_rd0'Sergei Shtylyov2017-01-092-5/+1Star
| | | | | | | | | | | | | | | | | | | | | | After checking all the available manuals, I have enough information to conclude that the 'shift_rd0' flag is only relevant for the Ether cores supporting so called "intelligent checksum" (and hence having CSMR) which is indicated by the 'hw_crc' flag. Since all the relevant SoCs now have both these flags set, we can at last get rid of the former flag... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2017-01-091-2/+3
|\|
| * sh_eth: R8A7740 supports packet shecksummingSergei Shtylyov2017-01-061-0/+1
| | | | | | | | | | | | | | | | | | | | The R8A7740 GEther controller supports the packet checksum offloading but the 'hw_crc' (bad name, I'll fix it) flag isn't set in the R8A7740 data, thus CSMR isn't cleared... Fixes: 73a0d907301e ("net: sh_eth: add support R8A7740") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-23 18:55:44 +0200