summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet
Commit message (Collapse)AuthorAgeFilesLines
* net/mlx5e: Tx, Unconstify SQ stop roomTariq Toukan2019-07-064-17/+21
| | | | | | | | | Use an SQ field for stop_room, and use the larger value only if TLS is supported. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx5e: Tx, Don't implicitly assume SKB-less wqe has one WQEBBEran Ben Elisha2019-07-061-2/+2
| | | | | | | | | | | | When polling a CQE of an SKB-less WQE, don't assume it consumed only one WQEBB. Use wi->num_wqebbs directly instead. In the downstream patch, SKB-less WQEs might have more the one WQEBB, thus this change is needed. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx5e: Tx, Make SQ WQE fetch function type genericTariq Toukan2019-07-063-8/+10
| | | | | | | | | | | | | | | Change mlx5e_sq_fetch_wqe to be agnostic to the Work Queue Element (WQE) type. Before this patch, it was specific for struct mlx5e_tx_wqe. In order to allow the change, the function now returns the generic void pointer, and gets the WQE size to do the zero memset. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx5e: Tx, Enforce L4 inline copy when neededTariq Toukan2019-07-062-1/+9
| | | | | | | | | | | | | When ctrl->tisn field exists, this indicates an operation (HW offload) on the TCP payload. For such WQEs, inline the headers up to L4. This is in preparation for kTLS HW offload support, added in a downstream patch. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx5e: Move helper functions to a new txrx datapath headerTariq Toukan2019-07-068-153/+170
| | | | | | | | | Take datapath helper functions to a new header file en/txrx.h. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx5: Accel, Add core TLS support for the Connect-X familyTariq Toukan2019-07-063-3/+101
| | | | | | | | | | Add support for the new TLS implementation of the Connect-X family. Introduce a new compilation flag MLX5_TLS for it. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx5: Add crypto library to support create/destroy encryption keyTariq Toukan2019-07-063-1/+78
| | | | | | | | | | | | | Encryption key create / destroy is done via CREATE_GENERAL_OBJECT / DESTROY_GENERAL_OBJECT commands. To be used in downstream patches by TLS API wrappers, to configure the TIS context with the encryption key. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx5: Kconfig, Better organize compilation flagsTariq Toukan2019-07-067-92/+46Star
| | | | | | | | | | | | | | | | Always contain all acceleration functions declarations in 'accel' files, independent to the flags setting. For this, introduce new flags CONFIG_FPGA_{IPSEC/TLS} and use stubs where needed. This obsoletes the need for stubs in 'fpga' files. Remove them. Also use the new flags in Makefile, to decide whether to compile TLS-specific or IPSEC-specific objects, or not. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx5: Accel, Expose accel wrapper for IPsec FPGA functionTariq Toukan2019-07-063-1/+11
| | | | | | | | | | | | | Do not directly call fpga version of IPsec function from main.c. Wrap it by an accel version, and call the wrapper. This will allow deprecating the FPGA IPsec stubs in downstream patch. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge tag 'mlx5-updates-2019-07-04-v2' of ↵David S. Miller2019-07-0623-328/+681
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-update-2019-07-04 This series adds mlx5 support for devlink fw versions query. 1) Implement the required low level firmware commands 2) Implement the devlink knobs and callbacks for fw versions query. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * net/mlx5: Added devlink info callbackShay Agroskin2019-07-041-0/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The callback is invoked using 'devlink dev info <pci>' command and returns the running and pending firmware version of the HCA and the name of the kernel driver. If there is a pending firmware version (a new version is burned but the HCA still runs with the previous) it is returned as the stored firmware version. Otherwise, the running version is returned for this field. Output example: $ devlink dev info pci/0000:00:06.0 pci/0000:00:06.0: driver mlx5_core versions: fixed: fw.psid MT_0000000009 running: fw.version 16.26.0100 stored: fw.version 16.26.0100 Signed-off-by: Shay Agroskin <shayag@mellanox.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| * net/mlx5: Added fw version query commandShay Agroskin2019-07-042-20/+201
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Using the MCQI and MCQS registers, we query the running and pending fw version of the HCA. The MCQS is queried with sequentially increasing component index, until a component of type BOOT_IMG is found. Querying this component's version using the MCQI register yields the running and pending fw version of the HCA. Querying MCQI for the pending fw version should be done only after validating that such fw version exists. This is done my checking 'component update state' field in MCQS output. Signed-off-by: Shay Agroskin <shayag@mellanox.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| * Merge branch 'mlx5-next' of ↵Saeed Mahameed2019-07-0421-308/+420
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux Misc updates from mlx5-next branch: 1) Add the required HW definitions and structures for upcoming TLS support. 2) Add support for MCQI and MCQS hardware registers for fw version query. 3) Added hardware bits and structures definitions for sub-functions 4) Small code cleanup and improvement for PF pci driver. 5) Bluefield (ECPF) updates and refactoring for better E-Switch management on ECPF embedded CPU NIC: 5.1) Consolidate querying eswitch number of VFs 5.2) Register event handler at the correct E-Switch init stage 5.3) Setup PF's inline mode and vlan pop when the ECPF is the E-Swtich manager ( the host PF is basically a VF ). 5.4) Handle Vport UC address changes in switchdev mode. 6) Cleanup the rep and netdev reference when unloading IB rep. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> i# All conflicts fixed but you are still merging.
| | * net/mlx5: Refactor mlx5_esw_query_functions for modularityParav Pandit2019-07-034-22/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Functions change event output data size changes when functions other than VFs will be enabled in HCA CAP. With current API, multiple callers needs to align, calculate accurate size of the output data depending on number on non VF functions enabled in the device. Instead of duplicating such math at multiple places, refactor mlx5_esw_query_functions() to return raw output allocated by itself. Caller must free the allocated memory using kvfree() as described in the function comment section. This hides calcuation within mlx5_esw_query_functions() and provides simpler API. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| | * net/mlx5: E-Switch prepare functions change handler to be modularParav Pandit2019-07-031-17/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Eswitch function change handler will service multiple type of events for VFs and non VF functions update. Hence, introduce and use the helper function esw_vfs_changed_event_handler() for handling change in num VFs to improve the code readability. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| | * net/mlx5: Introduce and use mlx5_eswitch_get_total_vports()Parav Pandit2019-07-034-13/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead MLX5_TOTAL_VPORTS, use mlx5_eswitch_get_total_vports(). mlx5_eswitch_get_total_vports() in subsequent patch accounts for SF vports as well. Expanding MLX5_TOTAL_VPORTS macro would require exposing SF internals to more generic vport.h header file. Such exposure is not desired. Hence a mlx5_eswitch_get_total_vports() is introduced. Given that mlx5_eswitch_get_total_vports() API wants to work on const mlx5_core_dev*, change its helper functions also to accept const *dev. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| | * net/mlx5: Report EQE data upon CQ completionYishai Hadas2019-07-035-6/+8
| | | | | | | | | | | | | | | | | | | | | | | | Report EQE data upon CQ completion to let upper layers use this data. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
| | * net/mlx5: Report a CQ error event only when a handler was setYishai Hadas2019-07-031-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Report a CQ error event only when a handler was set. This enables mlx5_ib to not set a handler upon CQ creation and use some other mechanism to get this event as of other events by the mlx5_eq_notifier_register API. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
| | * net/mlx5: mlx5_core_create_cq() enhancementsYishai Hadas2019-07-033-6/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | Enhance mlx5_core_create_cq() to get the command out buffer from the callers to let them use the output. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
| | * net/mlx5: Expose the API to register for ANY eventYishai Hadas2019-07-032-3/+2Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | Expose the API to register for ANY event, mlx5_ib will be able to use this functionality for its needs. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
| | * net/mlx5: Use event mask based on device capabilitiesYishai Hadas2019-07-032-8/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the reported device capabilities for the supported user events (i.e. affiliated and un-affiliated) to set the EQ mask. As the event mask can be up to 256 defined by 4 entries of u64 change the applicable code to work accordingly. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
| | * net/mlx5: Fix mlx5_core_destroy_cq() error flowYishai Hadas2019-07-033-17/+10Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The firmware command to destroy a CQ might fail when the object is referenced by other object and the ref count is managed by the firmware. To enable a second successful destruction post the first failure need to change mlx5_eq_del_cq() to be a void function. As an error in mlx5_eq_del_cq() is quite fatal from the option to recover, a debug message inside it should be good enougth and it was changed to be void. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
| | * net/mlx5: E-Switch, Handle UC address change in switchdev modeBodong Wang2019-07-021-12/+9Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When NVME device emulation mode is enabled, more than one PFs use the same physical port. In this case, MPFS is required to program L2 addresses. It used to rely on netdev set_rx_mode in switchdev mode, but driver later changed to not create netdev for eswitch manager once in switchdev mode. So, UC address event should be handled. Signed-off-by: Bodong Wang <bodong@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| | * net/mlx5: E-Switch, Consider host PF for inline mode and vlan popBodong Wang2019-07-023-6/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When ECPF is the eswitch manager, host PF is treated like other VFs. Driver should do the same for inline mode and vlan pop. Add new iterators to include host PF if ECPF is the eswitch manager. Signed-off-by: Bodong Wang <bodong@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| | * net/mlx5: E-Switch, Use iterator for vlan and min-inline setupsBodong Wang2019-07-021-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the defined iterators to traversal VF reps/vport. Also, rely on num of VFs rather than the counter of enabled vports as PF will also be enabled from ECPF side, and the counter will be different from num of VFs. Signed-off-by: Bodong Wang <bodong@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| | * net/mlx5: E-Switch, Reg/unreg function changed event at correct stageBodong Wang2019-07-023-31/+26Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When driver is doing eswitch mode change, it's critical to keep number of enabled VFs unchanged. However, it can be changed on the fly once function changed event is registered. To remove this uncertainty, function changed event should not be registered before all setups, and first be unregistered before all cleanups. Wrap this functionality together with vport event handler. Fixes: 61fc880839e6 ("net/mlx5: E-Switch, Handle representors creation in handler context") Signed-off-by: Bodong Wang <bodong@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| | * net/mlx5: E-Switch, Consolidate eswitch function number of VFsBodong Wang2019-07-024-88/+90
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enabled number of VFs is key for eswich manager to do flow steering initialization and vport configurations. However, the number of enabled VFs may come from two sources as below. PF: num of VFs is provided by enabled SR-IOV of itself. ECPF: num of VFs is provided by enabled SR-IOV from its peer PF. And SR-IOV can't be enabled from ECPF itself. Current driver handles the two cases in different stages and passing the number of enabled VFs among a large scope of internal functions. It is usually hard to find out where is the real number of VFs from due to layers of argument pass-in. This patch consolidated that number from the entry point of doing eswitch setup, and maintained a copy so that eswitch functions can refer to it directly. Eswitch driver shall always use this number when referring to enabled number of VFs, don't use other numbers such as from SR-IOV. Signed-off-by: Bodong Wang <bodong@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| | * net/mlx5: E-Switch, Refactor eswitch SR-IOV interfaceBodong Wang2019-07-028-71/+72
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Devlink eswitch mode is not necessarily related to SR-IOV, e.g, ECPF can be at offload mode when SR-IOV is not enabled. Rename the interface and eswitch mode names to decouple from SR-IOV, and cleanup eswitch messages accordingly. Signed-off-by: Bodong Wang <bodong@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| | * net/mlx5: Handle host PF vport mac/guid for ECPFBodong Wang2019-07-028-17/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When ECPF is eswitch manager, it has the privilege to query and configure the mac and node guid of host PF. While vport number of host PF is 0, the vport command should be issued with other_vport set in this case as the cmd is issued by ECPF vport(0xfffe). Add a specific function to query own vport mac. Low level functions are used by vport manager to query/modify any vport mac and node guid. Signed-off-by: Bodong Wang <bodong@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| | * net/mlx5: E-Switch, Use correct flags when configuring vlanBodong Wang2019-07-021-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Before the offending commit, vlan will be configured if either vlan or qos is set. After the change with new set flags, function callers should provide flags accordingly. Fixes: e33dfe316cf3 ("net/mlx5: E-Switch, Allow fine tuning of eswitch vport push/pop vlan") Signed-off-by: Bodong Wang <bodong@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| | * net/mlx5: Reduce dependency on enabled_vfs counter and num_vfsParav Pandit2019-07-021-18/+4Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While enabling SR-IOV, PCI core already checks that if SR-IOV is already enabled, it returns failure error code. Hence, remove such duplicate check from mlx5_core driver. While at it, make mlx5_device_disable_sriov() to perform cleanup of VFs in reverse order of mlx5_device_enable_sriov(). Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| | * net/mlx5: Don't handle VF func change if host PF is disabledBodong Wang2019-07-021-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When ECPF eswitch manager is at offloads mode, it monitors functions changed event from host PF side and acts according to the number of VFs enabled/disabled. As ECPF and host PF work in two independent hosts, it's possible that host PF OS reboots but ECPF system is still kept on and continues monitoring events from host PF. When kernel from host PF side is booting, PCI iov driver does sriov_init and compute_max_vf_buses by iterating over all valid num of VFs. This triggers FLR and generates functions changed events, even though host PF HCA is not enabled at this time. However, ECPF is not aware of this information, and still handles these events as usual. ECPF system will see massive number of reps are created, but destroyed immediately once creation finished. To eliminate this noise, a bit is added to host parameter context to indicate host PF is disabled. ECPF will not handle the VF changed event if this bit is set. Signed-off-by: Bodong Wang <bodong@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| | * net/mlx5: Limit scope of mlx5_get_next_phys_dev() to PCI PF devicesParav Pandit2019-07-021-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | As mlx5_get_next_phys_dev is used only for PCI PF devices use case, limit it to search only for PCI devices. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Vu Pham <vuhuong@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| | * net/mlx5: Move pci status reg access mutex to mlx5_pci_initParav Pandit2019-07-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mlx5_pci_init() performs pci specific initialization of the mlx5_core_dev struct. Hence move pci_status_mutex to pci initialization routine mlx5_pci_init(). This allows reusing mlx5_mdev_init() to non PCI devices. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Vu Pham <vuhuong@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| | * net/mlx5: Rename mlx5_pci_dev_type to mlx5_coredev_typeHuy Nguyen2019-07-021-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rename mlx5_pci_dev_type to mlx5_coredev_type to distinguish different mlx5 device types. mlx5_coredev_type represents mlx5_core_dev instance type. Hence keep mlx5_coredev_type in mlx5_core_dev structure. Signed-off-by: Huy Nguyen <huyn@mellanox.com> Signed-off-by: Vu Pham <vuhuong@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| | * {IB, net}/mlx5: E-Switch, Use index of rep for vport to IB port mappingBodong Wang2019-07-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the single IB device mode, the mapping between vport number and rep relies on a counter. However for dynamic vport allocation, it is desired to keep consistent map of eswitch vport and IB port. Hence, simplify code to remove the free running counter and instead use the available vport index during load/unload sequence from the eswitch. Signed-off-by: Bodong Wang <bodong@mellanox.com> Suggested-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| | * net/mlx5: E-Switch, Use vport index when init repBodong Wang2019-07-021-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Driver is referring to the array index when doing rep initialization, using vport is confusing as it's normally interpreted as vport number. This patch doesn't change any functionality. Signed-off-by: Bodong Wang <bodong@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
* | | nfp: Use spinlock_t instead of struct spinlockSebastian Andrzej Siewior2019-07-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For spinlocks the type spinlock_t should be used instead of "struct spinlock". Use spinlock_t for spinlock's definition. Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: oss-drivers@netronome.com Cc: netdev@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | net: netsec: Sync dma for device on buffer allocationIlias Apalodimas2019-07-061-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Quoting Arnd, We have to do a sync_single_for_device /somewhere/ before the buffer is given to the device. On a non-cache-coherent machine with a write-back cache, there may be dirty cache lines that get written back after the device DMA's data into it (e.g. from a previous memset from before the buffer got freed), so you absolutely need to flush any dirty cache lines on it first. Since the coherency is configurable in this device make sure we cover all configurations by explicitly syncing the allocated buffer for the device before refilling it's descriptors Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | net: hns3: set maximum length to resp_data_len for exceptional casePeng Li2019-07-061-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If HCLGE_MBX_MAX_RESP_DATA_SIZE > HCLGE_MBX_MAX_RESP_DATA_SIZE, the memcpy will cause out of memory. So this patch just set resp_data_len to the maximum length for this case. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | net: hns3: bitwise operator should use unsigned typeYonglong Liu2019-07-063-25/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are some bitwise operator used signed type, this patch fixes them with unsigned type. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | net: hns3: add default value for tc_size and tc_offsetPeng Li2019-07-061-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds default value for tc_size and tc_offset, or it may get random value and used later. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | net: hns3: check msg_data before memcpy in hclgevf_send_mbx_msgWeihang Li2019-07-061-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The value of msg_data may be NULL in some cases, which will cause errors reported by some compiler. So this patch adds a check to fix it. Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | net: hns3: set default value for param "type" in hclgevf_bind_ring_to_vectorPeng Li2019-07-061-3/+2Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The value of param type is always not changed in hclgevf_bind_ring_to_vector, move the assignment to front of "for {}" can reduce the redundant assignment. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | net: hns3: add all IMP return codePeng Li2019-07-064-18/+85
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, the HNS3 driver just defines part of IMP return code, This patch supplements all the remaining IMP return code, and adds a function to convert this code to the error number. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | net: hns3: fix port capbility updating issueJian Shen2019-07-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, the driver queries the media port information, and updates the port capability periodically. But it sets an error mac->speed_type value, which stops update port capability. Fixes: 88d10bd6f730 ("net: hns3: add support for multiple media type") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | net: hns3: fix flow control configure issue for fibre portJian Shen2019-07-061-11/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Flow control autoneg is unsupported for fibre port. It takes no effect for flow control when restart autoneg. This patch fixes it, return -EOPNOTSUPP when user tries to enable flow control autoneg. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | net: hns3: enable broadcast promisc mode when initializing VFJian Shen2019-07-061-3/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For revision 0x20, the broadcast promisc is enabled by firmware, it's unnecessary to enable it when initializing VF. For revision 0x21, it's necessary to enable broadcast promisc mode when initializing or re-initializing VF, otherwise, it will be unable to send and receive promisc packets. Fixes: f01f5559cac8 ("net: hns3: don't allow vf to enable promisc mode") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | mlxsw: spectrum_ptp: Apply the PTP shaper enable/disable logicShalom Toledo2019-07-061-0/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Apply by filling the PTP shaper parameters array. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | mlxsw: spectrum: Set up PTP shaper when port status has changedShalom Toledo2019-07-064-0/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When getting port up down event (PUDE), change the PTP shaper configuration based on hardware time stamping on/off and the port's speed. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-10-01 18:05:46 +0200