summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet
Commit message (Collapse)AuthorAgeFilesLines
* bnxt_en: Fix possible BUG() condition when calling pci_disable_msix().Michael Chan2019-05-234-9/+10
| | | | | | | | | | | | | | | When making configuration changes, the driver calls bnxt_close_nic() and then bnxt_open_nic() for the changes to take effect. A parameter irq_re_init is passed to the call sequence to indicate if IRQ should be re-initialized. This irq_re_init parameter needs to be included in the bnxt_reserve_rings() call. bnxt_reserve_rings() can only call pci_disable_msix() if the irq_re_init parameter is true, otherwise it may hit BUG() because some IRQs may not have been freed yet. Fixes: 41e8d7983752 ("bnxt_en: Modify the ring reservation functions for 57500 series chips.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnxt_en: Fix aggregation buffer leak under OOM condition.Michael Chan2019-05-231-0/+2
| | | | | | | | | | | | | | | For every RX packet, the driver replenishes all buffers used for that packet and puts them back into the RX ring and RX aggregation ring. In one code path where the RX packet has one RX buffer and one or more aggregation buffers, we missed recycling the aggregation buffer(s) if we are unable to allocate a new SKB buffer. This leads to the aggregation ring slowly running out of buffers over time. Fix it by properly recycling the aggregation buffers. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Reported-by: Rakesh Hemnani <rhemnani@fb.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: stmmac: fix reset gpio free missingJisheng Zhang2019-05-231-1/+2
| | | | | | | | | | | | | Commit 984203ceff27 ("net: stmmac: mdio: remove reset gpio free") removed the reset gpio free, when the driver is unbinded or rmmod, we miss the gpio free. This patch uses managed API to request the reset gpio, so that the gpio could be freed properly. Fixes: 984203ceff27 ("net: stmmac: mdio: remove reset gpio free") Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: macb: save/restore the remaining registers and featuresClaudiu Beznea2019-05-232-27/+91
| | | | | | | | | | | SAMA5D2 SoC has a suspend mode where SoC's power is cut off. Due to this the registers content is lost after a suspend/resume cycle. The current suspend/resume implementation covers some of these registers. However there are few which were not treated (e.g. SCRT2 and USRIO). Apart from this, netdev features are not restored. Treat these issues. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ocelot: Dont allocate another multicast list, use __dev_mc_syncClaudiu Manoil2019-05-222-39/+8Star
| | | | | | | | | | | | | | | | | | | | Doing kmalloc in atomic context is always an issue, more so for a list that can grow significantly. Turns out that the driver only uses the duplicated list of multicast mac addresses to keep track of what addresses to delete from h/w before committing the new list from kernel to h/w back again via set_rx_mode, every time this list gets updated by the kernel. Given that the h/w knows how to add and delete mac addresses based on the mac address value alone, __dev_mc_sync should be the much better choice of kernel API for these operations avoiding the considerable overhead of maintaining a duplicated list in the driver. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2019-05-227-32/+26Star
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David Miller: 1) Clear up some recent tipc regressions because of registration ordering. Fix from Junwei Hu. 2) tipc's TLV_SET() can read past the end of the supplied buffer during the copy. From Chris Packham. 3) ptp example program doesn't match the kernel, from Richard Cochran. 4) Outgoing message type fix in qrtr, from Bjorn Andersson. 5) Flow control regression in stmmac, from Tan Tee Min. 6) Fix inband autonegotiation in phylink, from Russell King. 7) Fix sk_bound_dev_if handling in rawv6_bind(), from Mike Manning. 8) Fix usbnet crash after disconnect, from Kloetzke Jan. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (21 commits) usbnet: fix kernel crash after disconnect selftests: fib_rule_tests: use pre-defined DEV_ADDR net-next: net: Fix typos in ip-sysctl.txt ipv6: Consider sk_bound_dev_if when binding a raw socket to an address net: phylink: ensure inband AN works correctly usbnet: ipheth: fix racing condition net: stmmac: dma channel control register need to be init first net: stmmac: fix ethtool flow control not able to get/set net: qrtr: Fix message type of outgoing packets networking: : fix typos in code comments ptp: Fix example program to match kernel. fddi: fix typos in code comments selftests: fib_rule_tests: enable forwarding before ipv4 from/iif test selftests: fib_rule_tests: fix local IPv4 address typo tipc: Avoid copying bytes beyond the supplied data 2/2] net: xilinx_emaclite: use readx_poll_timeout() in mdio wait function 1/2] net: axienet: use readx_poll_timeout() in mdio wait function vlan: Mark expected switch fall-through macvlan: Mark expected switch fall-through net/mlx4_en: ethtool, Remove unsupported SFP EEPROM high pages query ...
| * net: stmmac: dma channel control register need to be init firstWeifeng Voon2019-05-211-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | stmmac_init_chan() needs to be called before stmmac_init_rx_chan() and stmmac_init_tx_chan(). This is because if PBLx8 is to be used, "DMA_CH(#i)_Control.PBLx8" needs to be set before programming "DMA_CH(#i)_TX_Control.TxPBL" and "DMA_CH(#i)_RX_Control.RxPBL". Fixes: 47f2a9ce527a ("net: stmmac: dma channel init prepared for multiple queues") Reviewed-by: Zhang, Baoli <baoli.zhang@intel.com> Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Weifeng Voon <weifeng.voon@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: stmmac: fix ethtool flow control not able to get/setTan, Tee Min2019-05-211-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently ethtool was not able to get/set the flow control due to a missing "!". It will always return -EOPNOTSUPP even the device is flow control supported. This patch fixes the condition check for ethtool flow control get/set function for ETHTOOL_LINK_MODE_Asym_Pause_BIT. Fixes: 3c1bcc8614db (“net: ethernet: Convert phydev advertize and supported from u32 to link mode”) Signed-off-by: Tan, Tee Min <tee.min.tan@intel.com> Reviewed-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Voon, Weifeng <weifeng.voon@intel.com@intel.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
| * 2/2] net: xilinx_emaclite: use readx_poll_timeout() in mdio wait functionKurt Kanzenbach2019-05-211-10/+6Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On loaded systems with a preemptible kernel the mdio_wait() function may report an error while everything is working fine: xemaclite_mdio_wait(): xemaclite_readl() -> chip not ready --> interrupt here (other work for some time / chip become ready) if (time_before_eq(end, jiffies)) --> false positive error report Replace the current code with readx_poll_timeout() which takes care of the situation. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
| * 1/2] net: axienet: use readx_poll_timeout() in mdio wait functionKurt Kanzenbach2019-05-212-10/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On loaded systems with a preemptible kernel the mdio_wait() function may report an error while everything is working fine: axienet_mdio_wait_until_ready(): axienet_ior() -> chip not ready --> interrupt here (other work for some time / chip become ready) if (time_before_eq(end, jiffies)) --> false positive error report Replace the current code with readx_poll_timeout() which take care of the situation. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net/mlx4_en: ethtool, Remove unsupported SFP EEPROM high pages queryErez Alfasi2019-05-202-6/+3Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Querying EEPROM high pages data for SFP module is currently not supported by our driver but is still tried, resulting in invalid FW queries. Set the EEPROM ethtool data length to 256 for SFP module to limit the reading for page 0 only and prevent invalid FW queries. Fixes: 7202da8b7f71 ("ethtool, net/mlx4_en: Cable info, get_module_info/eeprom ethtool support") Signed-off-by: Erez Alfasi <ereza@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge tag 'spdx-5.2-rc2' of ↵Linus Torvalds2019-05-21268-750/+268Star
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull SPDX update from Greg KH: "Here is a series of patches that add SPDX tags to different kernel files, based on two different things: - SPDX entries are added to a bunch of files that we missed a year ago that do not have any license information at all. These were either missed because the tool saw the MODULE_LICENSE() tag, or some EXPORT_SYMBOL tags, and got confused and thought the file had a real license, or the files have been added since the last big sweep, or they were Makefile/Kconfig files, which we didn't touch last time. - Add GPL-2.0-only or GPL-2.0-or-later tags to files where our scan tools can determine the license text in the file itself. Where this happens, the license text is removed, in order to cut down on the 700+ different ways we have in the kernel today, in a quest to get rid of all of these. These patches have been out for review on the linux-spdx@vger mailing list, and while they were created by automatic tools, they were hand-verified by a bunch of different people, all whom names are on the patches are reviewers. The reason for these "large" patches is if we were to continue to progress at the current rate of change in the kernel, adding license tags to individual files in different subsystems, we would be finished in about 10 years at the earliest. There will be more series of these types of patches coming over the next few weeks as the tools and reviewers crunch through the more "odd" variants of how to say "GPLv2" that developers have come up with over the years, combined with other fun oddities (GPL + a BSD disclaimer?) that are being unearthed, with the goal for the whole kernel to be cleaned up. These diffstats are not small, 3840 files are touched, over 10k lines removed in just 24 patches" * tag 'spdx-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (24 commits) treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 25 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 24 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 23 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 22 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 21 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 20 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 19 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 18 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 17 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 15 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 14 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 12 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 11 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 10 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 9 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 7 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 5 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 4 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 3 ...
| * treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 23Thomas Gleixner2019-05-212-21/+2Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on 1 normalized pattern(s): this software may be redistributed and or modified under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 2 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154042.800979546@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 15Thomas Gleixner2019-05-219-153/+9Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses the full gnu general public license is included in this distribution in the file called copying extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 9 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154042.045106120@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13Thomas Gleixner2019-05-2143-561/+43Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details [based] [from] [clk] [highbank] [c] you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 355 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154041.837383322@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 1Thomas Gleixner2019-05-211-15/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin street fifth floor boston ma 02110 1301 usa this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option [no]_[pad]_[ctrl] any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin street fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 176 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154040.652910950@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2019-05-21196-0/+196
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * treewide: Add SPDX license identifier for more missed filesThomas Gleixner2019-05-2117-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add SPDX license identifiers to all files which: - Have no license information of any form - Have MODULE_LICENCE("GPL*") inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2019-05-2025-68/+181
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David Miller:1) Use after free in __dev_map_entry_free(), from Eric Dumazet. 1) Use after free in __dev_map_entry_free(), from Eric Dumazet. 2) Fix TCP retransmission timestamps on passive Fast Open, from Yuchung Cheng. 3) Orphan NFC, we'll take the patches directly into my tree. From Johannes Berg. 4) We can't recycle cloned TCP skbs, from Eric Dumazet. 5) Some flow dissector bpf test fixes, from Stanislav Fomichev. 6) Fix RCU marking and warnings in rhashtable, from Herbert Xu. 7) Fix some potential fib6 leaks, from Eric Dumazet. 8) Fix a _decode_session4 uninitialized memory read bug fix that got lost in a merge. From Florian Westphal. 9) Fix ipv6 source address routing wrt. exception route entries, from Wei Wang. 10) The netdev_xmit_more() conversion was not done %100 properly in mlx5 driver, fix from Tariq Toukan. 11) Clean up botched merge on netfilter kselftest, from Florian Westphal. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (74 commits) of_net: fix of_get_mac_address retval if compiled without CONFIG_OF net: fix kernel-doc warnings for socket.c net: Treat sock->sk_drops as an unsigned int when printing kselftests: netfilter: fix leftover net/net-next merge conflict mlxsw: core: Prevent reading unsupported slave address from SFP EEPROM mlxsw: core: Prevent QSFP module initialization for old hardware vsock/virtio: Initialize core virtio vsock before registering the driver net/mlx5e: Fix possible modify header actions memory leak net/mlx5e: Fix no rewrite fields with the same match net/mlx5e: Additional check for flow destination comparison net/mlx5e: Add missing ethtool driver info for representors net/mlx5e: Fix number of vports for ingress ACL configuration net/mlx5e: Fix ethtool rxfh commands when CONFIG_MLX5_EN_RXNFC is disabled net/mlx5e: Fix wrong xmit_more application net/mlx5: Fix peer pf disable hca command net/mlx5: E-Switch, Correct type to u16 for vport_num and int for vport_index net/mlx5: Add meaningful return codes to status_to_err function net/mlx5: Imply MLXFW in mlx5_core Revert "tipc: fix modprobe tipc failed after switch order of device registration" vsock/virtio: free packets during the socket release ...
| * mlxsw: core: Prevent reading unsupported slave address from SFP EEPROMVadim Pasternak2019-05-181-2/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Prevent reading unsupported slave address from SFP EEPROM by testing Diagnostic Monitoring Type byte in EEPROM. Read only page zero of EEPROM, in case this byte is zero. If some SFP transceiver does not support Digital Optical Monitoring (DOM), reading SFP EEPROM slave address 0x51 could return an error. Availability of DOM support is verified by reading from zero page Diagnostic Monitoring Type byte describing how diagnostic monitoring is implemented by transceiver. If bit 6 of this byte is set, it indicates that digital diagnostic monitoring has been implemented. Otherwise it is not and transceiver could fail to reply to transaction for slave address 0x51 [1010001X (A2h)], which is used to access measurements page. Such issue has been observed when reading cable MCP2M00-xxxx, MCP7F00-xxxx, and few others. Fixes: 2ea109039cd3 ("mlxsw: spectrum: Add support for access cable info via ethtool") Fixes: 4400081b631a ("mlxsw: spectrum: Fix EEPROM access in case of SFP/SFP+") Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * mlxsw: core: Prevent QSFP module initialization for old hardwareVadim Pasternak2019-05-184-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Old Mellanox silicons, like switchx-2, switch-ib do not support reading QSFP modules temperature through MTMP register. Attempt to access this register on systems equipped with the this kind of silicon will cause initialization flow failure. Test for hardware resource capability is added in order to distinct between old and new silicon - old silicons do not have such capability. Fixes: 6a79507cfe94 ("mlxsw: core: Extend thermal module with per QSFP module thermal zones") Fixes: 5c42eaa07bd0 ("mlxsw: core: Extend hwmon interface with QSFP module temperature attributes") Reported-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net/mlx5e: Fix possible modify header actions memory leakEli Britstein2019-05-171-1/+4
| | | | | | | | | | | | | | | | | | | | The cited commit could disable the modify header flag, but did not free the allocated memory for the modify header actions. Fix it. Fixes: 27c11b6b844cd ("net/mlx5e: Do not rewrite fields with the same match") Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| * net/mlx5e: Fix no rewrite fields with the same matchEli Britstein2019-05-171-6/+16
| | | | | | | | | | | | | | | | | | | | | | | | With commit 27c11b6b844c ("net/mlx5e: Do not rewrite fields with the same match") there are no rewrites if the rewrite value is the same as the matched value. However, if the field is not matched, the rewrite is also wrongly skipped. Fix it. Fixes: 27c11b6b844c ("net/mlx5e: Do not rewrite fields with the same match") Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| * net/mlx5e: Additional check for flow destination comparisonDmytro Linkin2019-05-171-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Flow destination comparison has an inaccuracy: code see no difference between same vf ports, which belong to different pfs. Example: If start ping from VF0 (PF1) to VF1 (PF1) and mirror all traffic to VF0 (PF2), icmp reply to VF0 (PF1) and mirrored flow to VF0 (PF2) would be determined as same destination. It lead to creating flow handler with rule nodes, which not added to node tree. When later driver try to delete this flow rules we got kernel crash. Add comparison of vhca_id field to avoid this. Fixes: 1228e912c934 ("net/mlx5: Consider encapsulation properties when comparing destinations") Signed-off-by: Dmytro Linkin <dmitrolin@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| * net/mlx5e: Add missing ethtool driver info for representorsDmytro Linkin2019-05-171-1/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | For all representors added firmware version info to show in ethtool driver info. For uplink representor, because only it is tied to the pci device sysfs, added pci bus info. Fixes: ff9b85de5d5d ("net/mlx5e: Add some ethtool port control entries to the uplink rep netdev") Signed-off-by: Dmytro Linkin <dmitrolin@mellanox.com> Reviewed-by: Gavi Teitz <gavi@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| * net/mlx5e: Fix number of vports for ingress ACL configurationEli Britstein2019-05-171-4/+5
| | | | | | | | | | | | | | | | | | | | With the cited commit, ACLs are configured for the VF ports. The loop for the number of ports had the wrong number. Fix it. Fixes: 184867373d8c ("net/mlx5e: ACLs for priority tag mode") Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| * net/mlx5e: Fix ethtool rxfh commands when CONFIG_MLX5_EN_RXNFC is disabledSaeed Mahameed2019-05-171-1/+17
| | | | | | | | | | | | | | | | | | | | | | | | ethtool user spaces needs to know ring count via ETHTOOL_GRXRINGS when executing (ethtool -x) which is retrieved via ethtool get_rxnfc callback, in mlx5 this callback is disabled when CONFIG_MLX5_EN_RXNFC=n. This patch allows only ETHTOOL_GRXRINGS command on mlx5e_get_rxnfc() when CONFIG_MLX5_EN_RXNFC is disabled, so ethtool -x will continue working. Fixes: fe6d86b3c316 ("net/mlx5e: Add CONFIG_MLX5_EN_RXNFC for ethtool rx nfc") Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| * net/mlx5e: Fix wrong xmit_more applicationTariq Toukan2019-05-173-6/+8
| | | | | | | | | | | | | | | | | | Cited patch refactored the xmit_more indication while not preserving its functionality. Fix it. Fixes: 3c31ff22b25f ("drivers: mellanox: use netdev_xmit_more() helper") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| * net/mlx5: Fix peer pf disable hca commandBodong Wang2019-05-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | The command was mistakenly using enable_hca in embedded CPU field. Fixes: 22e939a91dcb (net/mlx5: Update enable HCA dependency) Signed-off-by: Bodong Wang <bodong@mellanox.com> Reported-by: Alex Rosenbaum <alexr@mellanox.com> Signed-off-by: Alex Rosenbaum <alexr@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| * net/mlx5: E-Switch, Correct type to u16 for vport_num and int for vport_indexParav Pandit2019-05-173-26/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To avoid any ambiguity between vport index and vport number, rename functions that had vport, to vport_num or vport_index appropriately. vport_num is u16 hence change mlx5_eswitch_index_to_vport_num() return type to u16. vport_index is an int in vport array. Hence change input type of vport index in mlx5_eswitch_index_to_vport_num() to int. Correct multiple eswitch representor interfaces use type u16 of rep->vport as type int vport_index. Send vport FW commands with correct eswitch u16 vport_num instead host int vport_index. Fixes: 5ae5162066d8 ("net/mlx5: E-Switch, Assign a different position for uplink rep and vport") Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Vu Pham <vuhuong@mellanox.com> Reviewed-by: Bodong Wang <bodong@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| * net/mlx5: Add meaningful return codes to status_to_err functionValentine Fatiev2019-05-171-1/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current version of function status_to_err return -1 for any status returned by mlx5_cmd_invoke function. In case status is MLX5_DRIVER_STATUS_ABORTED we should return 0 to the caller as we assume command completed successfully on FW. If error returned we are getting confusing messages in dmesg. In addition, currently returned value -1 is confusing with -EPERM. New implementation actually fix original commit and return meaningful codes for commands delivery status and print message in case of failure. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Valentine Fatiev <valentinef@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| * net/mlx5: Imply MLXFW in mlx5_coreSaeed Mahameed2019-05-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | mlxfw can be compiled as external module while mlx5_core can be builtin, in such case mlx5 will act like mlxfw is disabled. Since mlxfw is just a service library for mlx* drivers, imply it in mlx5_core to make it always reachable if it was enabled. Fixes: 3ffaabecd1a1 ("net/mlx5e: Support the flash device ethtool callback") Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| * net/mlx5e: Fix calling wrong function to get inner vlan key and maskJianbo Liu2019-05-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When flow_rule_match_XYZ() functions were first introduced, flow_rule_match_cvlan() for inner vlan is missing. In mlx5_core driver, to get inner vlan key and mask, flow_rule_match_vlan() is just called, which is wrong because it obtains outer vlan information by FLOW_DISSECTOR_KEY_VLAN. This commit fixes this by changing to call flow_rule_match_cvlan() after it's added. Fixes: 8f2566225ae2 ("flow_offload: add flow_rule and flow_match structures and use them") Signed-off-by: Jianbo Liu <jianbol@mellanox.com> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * enetc: Add missing link state info for ethtoolClaudiu Manoil2019-05-151-0/+2
| | | | | | | | | | | | | | | | Just hook get_link to standard ethtool_op_get_link, nothing special needed at this point. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * enetc: Allow to disable Tx SGClaudiu Manoil2019-05-152-2/+2
| | | | | | | | | | | | | | | | | | The fact that the Tx SG flag is fixed to 'on' is only an oversight. Non-SG mode is also supported. Fix this by allowing to turn SG off. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * enetc: Fix NULL dma address unmap for Tx BD extensionsClaudiu Manoil2019-05-151-1/+3
| | | | | | | | | | | | | | | | | | | | For the unlikely case of TxBD extensions (i.e. ptp) the driver tries to unmap the tx_swbd corresponding to the extension, which is bogus as it has no buffer attached. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * nfp: flower: add rcu locks when accessing netdev for tunnelsPieter Jansen van Vuuren2019-05-151-6/+11
| | | | | | | | | | | | | | | | | | | | | | | | Add rcu locks when accessing netdev when processing route request and tunnel keep alive messages received from hardware. Fixes: 8e6a9046b66a ("nfp: flower vxlan neighbour offload") Fixes: 856f5b135758 ("nfp: flower vxlan neighbour keep-alive") Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: macb: fix error format in dev_err()Luca Ceresoli2019-05-151-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Errors are negative numbers. Using %u shows them as very large positive numbers such as 4294967277 that don't make sense. Use the %d format instead, and get a much nicer -19. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Fixes: b48e0bab142f ("net: macb: Migrate to devm clock interface") Fixes: 93b31f48b3ba ("net/macb: unify clock management") Fixes: 421d9df0628b ("net/macb: merge at91_ether driver into macb driver") Fixes: aead88bd0e99 ("net: ethernet: macb: Add support for rx_clk") Fixes: f5473d1d44e4 ("net: macb: Support clock management for tsu_clk") Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net/mlx4_core: Change the error print to info printYunjian Wang2019-05-151-1/+1
| | | | | | | | | | | | | | | | | | | | The error print within mlx4_flow_steer_promisc_add() should be a info print. Fixes: 592e49dda812 ('net/mlx4: Implement promiscuous mode with device managed flow-steering') Signed-off-by: Yunjian Wang <wangyunjian@huawei.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | treewide: prefix header search paths with $(srctree)/Masahiro Yamada2019-05-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, the Kbuild core manipulates header search paths in a crazy way [1]. To fix this mess, I want all Makefiles to add explicit $(srctree)/ to the search paths in the srctree. Some Makefiles are already written in that way, but not all. The goal of this work is to make the notation consistent, and finally get rid of the gross hacks. Having whitespaces after -I does not matter since commit 48f6e3cf5bc6 ("kbuild: do not drop -I without parameter"). [1]: https://patchwork.kernel.org/patch/9632347/ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | Merge branch 'next' of ↵Linus Torvalds2019-05-171-1/+0Star
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management updates from Zhang Rui: - Remove the 'module' Kconfig option for thermal subsystem framework because the thermal framework are required to be ready as early as possible to avoid overheat at boot time (Daniel Lezcano) - Fix a bug that thermal framework pokes disabled thermal zones upon resume (Wei Wang) - A couple of cleanups and trivial fixes on int340x thermal drivers (Srinivas Pandruvada, Zhang Rui, Sumeet Pawnikar) * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: drivers: thermal: processor_thermal: Downgrade error message mlxsw: Remove obsolete dependency on THERMAL=m hwmon/drivers/core: Simplify complex dependency thermal/drivers/core: Fix typo in the option name thermal/drivers/core: Remove depends on THERMAL in Kconfig thermal/drivers/core: Remove module unload code thermal/drivers/core: Remove the module Kconfig's option thermal: core: skip update disabled thermal zones after suspend thermal: make device_register's type argument const thermal: intel: int340x: processor_thermal_device: simplify to get driver data thermal/int3403_thermal: favor _TMP instead of PTYP
| * | mlxsw: Remove obsolete dependency on THERMAL=mGeert Uytterhoeven2019-05-061-1/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The THERMAL configuration option was changed from tristate to bool, but a dependency on THERMAL=m was forgotten, leading to a warning when running "make savedefconfig": boolean symbol THERMAL tested for 'm'? test forced to 'n' Fixes: be33e4fbbea581ea ("thermal/drivers/core: Remove the module Kconfig's option") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
* | | Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds2019-05-163-4/+14
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM SoC platform updates from Olof Johansson: "SoC updates, mostly refactorings and cleanups of old legacy platforms. Major themes this release: - Conversion of ixp4xx to a modern platform (drivers, DT, bindings) - Moving some of the ep93xx headers around to get it closer to multiplatform enabled. - Cleanups of Davinci This also contains a few patches that were queued up as fixes before 5.1 but I didn't get sent in before release" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits) ARM: debug-ll: add default address for digicolor ARM: u300: regulator: add MODULE_LICENSE() ARM: ep93xx: move private headers out of mach/* ARM: ep93xx: move pinctrl interfaces into include/linux/soc ARM: ep93xx: keypad: stop using mach/platform.h ARM: ep93xx: move network platform data to separate header ARM: stm32: add AMBA support for stm32 family MAINTAINERS: update arch/arm/mach-davinci ARM: rockchip: add missing of_node_put in rockchip_smp_prepare_pmu ARM: dts: Add queue manager and NPE to the IXP4xx DTSI soc: ixp4xx: qmgr: Add DT probe code soc: ixp4xx: qmgr: Add DT bindings for IXP4xx qmgr soc: ixp4xx: npe: Add DT probe code soc: ixp4xx: Add DT bindings for IXP4xx NPE soc: ixp4xx: qmgr: Pass resources soc: ixp4xx: Remove unused functions soc: ixp4xx: Uninline several functions soc: ixp4xx: npe: Pass addresses as resources ARM: ixp4xx: Turn the QMGR into a platform device ARM: ixp4xx: Turn the NPE into a platform device ...
| * \ \ Merge branch 'fixes' into arm/socOlof Johansson2019-05-1677-487/+761
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Merge in a few pending fixes from pre-5.1 that didn't get sent in: MAINTAINERS: update arch/arm/mach-davinci ARM: dts: ls1021: Fix SGMII PCS link remaining down after PHY disconnect ARM: dts: imx6q-logicpd: Reduce inrush current on USBH1 ARM: dts: imx6q-logicpd: Reduce inrush current on start ARM: dts: imx: Fix the AR803X phy-mode ARM: dts: sun8i: a33: Reintroduce default pinctrl muxing arm64: dts: allwinner: a64: Rename hpvcc-supply to cpvdd-supply ARM: sunxi: fix a leaked reference by adding missing of_node_put ARM: sunxi: fix a leaked reference by adding missing of_node_put Signed-off-by: Olof Johansson <olof@lixom.net>
| * \ \ \ Merge tag 'ixp4xx-for-armsoc' of ↵Olof Johansson2019-04-291-2/+12
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/soc This modernizes the IXP4xx platform and adds initial Device Tree Support. We migrate to MULTI_IRQ_HANDLER, bumps the IRQs to offset 16, converts to SPARSE_IRQ, then we add proper subsystem drivers in each subsystem for irqchip, GPIO and clocksource and switch over to using these new drivers. Next we modernize the NPE and QMGR drivers and push them down into drivers/soc. This has been tested on the IXP4xx NSLU2 and the Gateworks GW2358-4. * tag 'ixp4xx-for-armsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: (31 commits) ARM: dts: Add queue manager and NPE to the IXP4xx DTSI soc: ixp4xx: qmgr: Add DT probe code soc: ixp4xx: qmgr: Add DT bindings for IXP4xx qmgr soc: ixp4xx: npe: Add DT probe code soc: ixp4xx: Add DT bindings for IXP4xx NPE soc: ixp4xx: qmgr: Pass resources soc: ixp4xx: Remove unused functions soc: ixp4xx: Uninline several functions soc: ixp4xx: npe: Pass addresses as resources ARM: ixp4xx: Turn the QMGR into a platform device ARM: ixp4xx: Turn the NPE into a platform device ARM: ixp4xx: Move IXP4xx QMGR and NPE headers ARM: ixp4xx: Move NPE and QMGR to drivers/soc ARM: dts: Add some initial IXP4xx device trees ARM: ixp4xx: Add device tree boot support ARM: ixp4xx: Add DT bindings gpio: ixp4xx: Add OF probing support gpio: ixp4xx: Add DT bindings clocksource/drivers/ixp4xx: Add OF initialization support clocksource/drivers/ixp4xx: Add DT bindings ... Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | | | ARM: ixp4xx: Move IXP4xx QMGR and NPE headersLinus Walleij2019-04-231-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This moves the IXP4xx Queue Manager and Network Processing Engine headers out of the <mack/*> include path as that is incompatible with multiplatform. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| | * | | | ARM: ixp4xx: Add device tree boot supportLinus Walleij2019-04-231-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds a minimal support for booting IXP4xx systems from device tree. We have to add hacks to the QMGR, NPE and notably also ethernet and watchdog drivers so that they don't crash the platform: these drivers are unconditionally starting to grab regions of statically remapped IO space with no concern of the device model or other platforms. We will go in and properly fix these drivers as we go along but for now this hack gets us to a place where we can start working on proper device tree support for these platforms. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | | | | ARM: ep93xx: move network platform data to separate headerArnd Bergmann2019-04-292-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The header file is the only thing preventing us from building the driver in a cross-platform configuration, so move the structure we are interested in to the global platform_data location and enable compile testing. Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
* | | | | | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds2019-05-151-0/+3
|\ \ \ \ \ \ | |_|_|_|_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull more rdma updates from Jason Gunthorpe: "This is being sent to get a fix for the gcc 9.1 build warnings, and I've also pulled in some bug fix patches that were posted in the last two weeks. - Avoid the gcc 9.1 warning about overflowing a union member - Fix the wrong callback type for a single response netlink to doit - Bug fixes from more usage of the mlx5 devx interface" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: net/mlx5: Set completion EQs as shared resources IB/mlx5: Verify DEVX general object type correctly RDMA/core: Change system parameters callback from dumpit to doit RDMA: Directly cast the sockaddr union to sockaddr
| * | | | | net/mlx5: Set completion EQs as shared resourcesYishai Hadas2019-05-141-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Mark completion EQs as shared resources so that they can be used by CQs with uid != 0. Fixes: 7efce3691d33 ("IB/mlx5: Add obj create and destroy functionality") Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-12 03:27:35 +0200