summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet
Commit message (Collapse)AuthorAgeFilesLines
* bnx2x: Fix VF's VLAN reconfiguration in reload.Manish Chopra2019-08-183-8/+18
| | | | | | | | | | | | | | | | | | Commit 04f05230c5c13 ("bnx2x: Remove configured vlans as part of unload sequence."), introduced a regression in driver that as a part of VF's reload flow, VLANs created on the VF doesn't get re-configured in hardware as vlan metadata/info was not getting cleared for the VFs which causes vlan PING to stop. This patch clears the vlan metadata/info so that VLANs gets re-configured back in the hardware in VF's reload flow and PING/traffic continues for VLANs created over the VFs. Fixes: 04f05230c5c13 ("bnx2x: Remove configured vlans as part of unload sequence.") Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Sudarsana Kalluru <skalluru@marvell.com> Signed-off-by: Shahed Shaikh <shshaikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: myri10ge: fix memory leaksWenwen Wang2019-08-151-1/+1
| | | | | | | | | | | In myri10ge_probe(), myri10ge_alloc_slices() is invoked to allocate slices related structures. Later on, myri10ge_request_irq() is used to get an irq. However, if this process fails, the allocated slices related structures are not deallocated, leading to memory leaks. To fix this issue, revise the target label of the goto statement to 'abort_with_slices'. Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
* liquidio: add cleanup in octeon_setup_iq()Wenwen Wang2019-08-151-1/+3
| | | | | | | | | If oct->fn_list.enable_io_queues() fails, no cleanup is executed, leading to memory/resource leaks. To fix this issue, invoke octeon_delete_instr_queue() before returning from the function. Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx5e: Fix compatibility issue with ethtool flash deviceEran Ben Elisha2019-08-153-0/+46
| | | | | | | | | | | | | | | | | Cited patch deleted ethtool flash device support, as ethtool core can fallback into devlink flash callback. However, this is supported only if there is a devlink port registered over the corresponding netdevice. As mlx5e do not have devlink port support over native netdevice, it broke the ability to flash device via ethtool. This patch re-add the ethtool callback to avoid user functionality breakage when trying to flash device via ethtool. Fixes: 9c8bca2637b8 ("mlx5: Move firmware flash implementation to devlink") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
* net/mlx5e: Fix a race with XSKICOSQ in XSK wakeup flowMaxim Mikityanskiy2019-08-151-0/+3
| | | | | | | | | | | Add a missing spinlock around XSKICOSQ usage at the activation stage, because there is a race between a configuration change and the application calling sendto(). Fixes: db05815b36cb ("net/mlx5e: Add XSK zero-copy support") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
* cxgb4: fix a memory leak bugWenwen Wang2019-08-151-1/+3
| | | | | | | | | In blocked_fl_write(), 't' is not deallocated if bitmap_parse_user() fails, leading to a memory leak bug. To fix this issue, free t before returning the error. Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx4_en: fix a memory leak bugWenwen Wang2019-08-141-1/+2
| | | | | | | | | | | | | | | In mlx4_en_config_rss_steer(), 'rss_map->indir_qp' is allocated through kzalloc(). After that, mlx4_qp_alloc() is invoked to configure RSS indirection. However, if mlx4_qp_alloc() fails, the allocated 'rss_map->indir_qp' is not deallocated, leading to a memory leak bug. To fix the above issue, add the 'qp_alloc_err' label to free 'rss_map->indir_qp'. Fixes: 4931c6ef04b4 ("net/mlx4_en: Optimized single ring steering") Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
* ibmveth: Convert multicast list size for little-endian systemThomas Falcon2019-08-141-4/+5
| | | | | | | | | | | | | The ibm,mac-address-filters property defines the maximum number of addresses the hypervisor's multicast filter list can support. It is encoded as a big-endian integer in the OF device tree, but the virtual ethernet driver does not convert it for use by little-endian systems. As a result, the driver is not behaving as it should on affected systems when a large number of multicast addresses are assigned to the device. Reported-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
* net: tc35815: Explicitly check NET_IP_ALIGN is not zero in tc35815_rxNathan Chancellor2019-08-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | clang warns: drivers/net/ethernet/toshiba/tc35815.c:1507:30: warning: use of logical '&&' with constant operand [-Wconstant-logical-operand] if (!HAVE_DMA_RXALIGN(lp) && NET_IP_ALIGN) ^ ~~~~~~~~~~~~ drivers/net/ethernet/toshiba/tc35815.c:1507:30: note: use '&' for a bitwise operation if (!HAVE_DMA_RXALIGN(lp) && NET_IP_ALIGN) ^~ & drivers/net/ethernet/toshiba/tc35815.c:1507:30: note: remove constant to silence this warning if (!HAVE_DMA_RXALIGN(lp) && NET_IP_ALIGN) ~^~~~~~~~~~~~~~~ 1 warning generated. Explicitly check that NET_IP_ALIGN is not zero, which matches how this is checked in other parts of the tree. Because NET_IP_ALIGN is a build time constant, this check will be constant folded away during optimization. Fixes: 82a9928db560 ("tc35815: Enable StripCRC feature") Link: https://github.com/ClangBuiltLinux/linux/issues/608 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlxsw: spectrum_ptp: Keep unmatched entries in a linked listPetr Machata2019-08-121-83/+55Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To identify timestamps for matching with their packets, Spectrum-1 uses a five-tuple of (port, direction, domain number, message type, sequence ID). If there are several clients from the same domain behind a single port sending Delay_Req's, the only thing differentiating these packets, as far as Spectrum-1 is concerned, is the sequence ID. Should sequence IDs between individual clients be similar, conflicts may arise. That is not a problem to hardware, which will simply deliver timestamps on a first comes, first served basis. However the driver uses a simple hash table to store the unmatched pieces. When a new conflicting piece arrives, it pushes out the previously stored one, which if it is a packet, is delivered without timestamp. Later on as the corresponding timestamps arrive, the first one is mismatched to the second packet, and the second one is never matched and eventually is GCd. To correct this issue, instead of using a simple rhashtable, use rhltable to keep the unmatched entries. Previously, a found unmatched entry would always be removed from the hash table. That is not the case anymore--an incompatible entry is left in the hash table. Therefore removal from the hash table cannot be used to confirm the validity of the looked-up pointer, instead the lookup would simply need to be redone. Therefore move it inside the critical section. This simplifies a lot of the code. Fixes: 8748642751ed ("mlxsw: spectrum: PTP: Support SIOCGHWTSTAMP, SIOCSHWTSTAMP ioctls") Reported-by: Alex Veber <alexve@mellanox.com> Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: nps_enet: Fix function names in doc commentsJonathan Neuschäfer2019-08-121-2/+2
| | | | | | | | Adjust the function names in two doc comments to match the corresponding functions. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge tag 'mlx5-fixes-2019-08-08' of ↵David S. Miller2019-08-0911-104/+97Star
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2019-08-08 This series introduces some fixes to mlx5 driver. Highlights: 1) From Tariq, Critical mlx5 kTLS fixes to better align with hw specs. 2) From Aya, Fixes to mlx5 tx devlink health reporter. 3) From Maxim, aRFs parsing to use flow dissector to avoid relying on invalid skb fields. Please pull and let me know if there is any problem. For -stable v4.3 ('net/mlx5e: Only support tx/rx pause setting for port owner') For -stable v4.9 ('net/mlx5e: Use flow keys dissector to parse packets for ARFS') For -stable v5.1 ('net/mlx5e: Fix false negative indication on tx reporter CQE recovery') ('net/mlx5e: Remove redundant check in CQE recovery flow of tx reporter') ('net/mlx5e: ethtool, Avoid setting speed to 56GBASE when autoneg off') Note: when merged with net-next this minor conflict will pop up: ++<<<<<<< (net-next) + if (is_eswitch_flow) { + flow->esw_attr->match_level = match_level; + flow->esw_attr->tunnel_match_level = tunnel_match_level; ++======= + if (flow->flags & MLX5E_TC_FLOW_ESWITCH) { + flow->esw_attr->inner_match_level = inner_match_level; + flow->esw_attr->outer_match_level = outer_match_level; ++>>>>>>> (net) To resolve, use hunks from net (2nd) and replace: if (flow->flags & MLX5E_TC_FLOW_ESWITCH) with if (is_eswitch_flow) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * net/mlx5e: Remove redundant check in CQE recovery flow of tx reporterAya Levin2019-08-081-3/+0Star
| | | | | | | | | | | | | | | | | | | | Remove check of recovery bit, in the beginning of the CQE recovery function. This test is already performed right before the reporter is invoked, when CQE error is detected. Fixes: de8650a82071 ("net/mlx5e: Add tx reporter support") Signed-off-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| * net/mlx5e: Fix error flow of CQE recovery on tx reporterAya Levin2019-08-082-5/+8
| | | | | | | | | | | | | | | | | | | | | | | | CQE recovery function begins with test and set of recovery bit. Add an error flow which ensures clearing of this bit when leaving the recovery function, to allow further recoveries to take place. This allows removal of clearing recovery bit on sq activate. Fixes: de8650a82071 ("net/mlx5e: Add tx reporter support") Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| * net/mlx5e: Fix false negative indication on tx reporter CQE recoveryAya Levin2019-08-081-4/+2Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove wrong error return value when SQ is not in error state. CQE recovery on TX reporter queries the sq state. If the sq is not in error state, the sq is either in ready or reset state. Ready state is good state which doesn't require recovery and reset state is a temporal state which ends in ready state. With this patch, CQE recovery in this scenario is successful. Fixes: de8650a82071 ("net/mlx5e: Add tx reporter support") Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| * net/mlx5e: kTLS, Fix tisn field placementTariq Toukan2019-08-081-3/+3
| | | | | | | | | | | | | | | | | | Shift the tisn field in the WQE control segment, per the HW specification. Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| * net/mlx5e: kTLS, Fix tisn field nameTariq Toukan2019-08-081-3/+3
| | | | | | | | | | | | | | | | Use the proper tisn field name from the union in struct mlx5_wqe_ctrl_seg. Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| * net/mlx5e: kTLS, Fix progress params context WQE layoutTariq Toukan2019-08-083-6/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The TLS progress params context WQE should not include an Eth segment, drop it. In addition, align the tls_progress_params layout with the HW specification document: - fix the tisn field name. - remove the valid bit. Fixes: a12ff35e0fb7 ("net/mlx5: Introduce TLS TX offload hardware bits and structures") Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| * net/mlx5: crypto, Fix wrong offset in encryption key commandTariq Toukan2019-08-081-0/+1
| | | | | | | | | | | | | | | | | | Fix the 128b key offset in key encryption key creation command, per the HW specification. Fixes: 45d3b55dc665 ("net/mlx5: Add crypto library to support create/destroy encryption key") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| * net/mlx5e: ethtool, Avoid setting speed to 56GBASE when autoneg offMohamad Heib2019-08-081-0/+8
| | | | | | | | | | | | | | | | | | | | Setting speed to 56GBASE is allowed only with auto-negotiation enabled. This patch prevent setting speed to 56GBASE when auto-negotiation disabled. Fixes: f62b8bb8f2d3 ("net/mlx5: Extend mlx5_core to support ConnectX-4 Ethernet functionality") Signed-off-by: Mohamad Heib <mohamadh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| * net/mlx5e: Only support tx/rx pause setting for port ownerHuy Nguyen2019-08-081-0/+3
| | | | | | | | | | | | | | | | | | | | Only support changing tx/rx pause frame setting if the net device is the vport group manager. Fixes: 3c2d18ef22df ("net/mlx5e: Support ethtool get/set_pauseparam") Signed-off-by: Huy Nguyen <huyn@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| * net/mlx5: Support inner header match criteria for non decap flow actionHuy Nguyen2019-08-083-21/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We have an issue that OVS application creates an offloaded drop rule that drops VXLAN traffic with both inner and outer header match criteria. mlx5_core driver detects correctly the inner and outer header match criteria but does not enable the inner header match criteria due to an incorrect assumption in mlx5_eswitch_add_offloaded_rule that only decap rule needs inner header criteria. Solution: Remove mlx5_esw_flow_attr's match_level and tunnel_match_level and add two new members: inner_match_level and outer_match_level. inner/outer_match_level is set to NONE if the inner/outer match criteria is not specified in the tc rule creation request. The decap assumption is removed and the code just needs to check for inner/outer_match_level to enable the corresponding bit in firmware's match_criteria_enable value. Fixes: 6363651d6dd7 ("net/mlx5e: Properly set steering match levels for offloaded TC decap rules") Signed-off-by: Huy Nguyen <huyn@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| * net/mlx5e: Use flow keys dissector to parse packets for ARFSMaxim Mikityanskiy2019-08-081-63/+34Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The current ARFS code relies on certain fields to be set in the SKB (e.g. transport_header) and extracts IP addresses and ports by custom code that parses the packet. The necessary SKB fields, however, are not always set at that point, which leads to an out-of-bounds access. Use skb_flow_dissect_flow_keys() to get the necessary information reliably, fix the out-of-bounds access and reuse the code. Fixes: 18c908e477dc ("net/mlx5e: Add accelerated RFS support") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
* | ixgbe: fix possible deadlock in ixgbe_service_task()Taehee Yoo2019-08-091-4/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | ixgbe_service_task() calls unregister_netdev() under rtnl_lock(). But unregister_netdev() internally calls rtnl_lock(). So deadlock would occur. Fixes: 59dd45d550c5 ("ixgbe: firmware recovery mode") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: tundra: tsi108: use spin_lock_irqsave instead of spin_lock_irq in IRQ ↵Fuqian Huang2019-08-091-2/+3
|/ | | | | | | | | | | | | context As spin_unlock_irq will enable interrupts. Function tsi108_stat_carry is called from interrupt handler tsi108_irq. Interrupts are enabled in interrupt handler. Use spin_lock_irqsave/spin_unlock_irqrestore instead of spin_(un)lock_irq in IRQ context to avoid this. Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: hisilicon: Fix dma_map_single failed on arm64Jiangfeng Xiao2019-08-061-9/+11
| | | | | | | | | | | | | On the arm64 platform, executing "ifconfig eth0 up" will fail, returning "ifconfig: SIOCSIFFLAGS: Input/output error." ndev->dev is not initialized, dma_map_single->get_dma_ops-> dummy_dma_ops->__dummy_map_page will return DMA_ERROR_CODE directly, so when we use dma_map_single, the first parameter is to use the device of platform_device. Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: hisilicon: fix hip04-xmit never return TX_BUSYJiangfeng Xiao2019-08-061-1/+1
| | | | | | | | | | | | | | | | TX_DESC_NUM is 256, in tx_count, the maximum value of mod(TX_DESC_NUM - 1) is 254, the variable "count" in the hip04_mac_start_xmit function is never equal to (TX_DESC_NUM - 1), so hip04_mac_start_xmit never return NETDEV_TX_BUSY. tx_count is modified to mod(TX_DESC_NUM) so that the maximum value of tx_count can reach (TX_DESC_NUM - 1), then hip04_mac_start_xmit can reurn NETDEV_TX_BUSY. Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: hisilicon: make hip04_tx_reclaim non-reentrantJiangfeng Xiao2019-08-061-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If hip04_tx_reclaim is interrupted while it is running and then __napi_schedule continues to execute hip04_rx_poll->hip04_tx_reclaim, reentrancy occurs and oops is generated. So you need to mask the interrupt during the hip04_tx_reclaim run. The kernel oops exception stack is as follows: Unable to handle kernel NULL pointer dereference at virtual address 00000050 pgd = c0003000 [00000050] *pgd=80000000a04003, *pmd=00000000 Internal error: Oops: 206 [#1] SMP ARM Modules linked in: hip04_eth mtdblock mtd_blkdevs mtd ohci_platform ehci_platform ohci_hcd ehci_hcd vfat fat sd_mod usb_storage scsi_mod usbcore usb_common CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 4.4.185 #1 Hardware name: Hisilicon A15 task: c0a250e0 task.stack: c0a00000 PC is at hip04_tx_reclaim+0xe0/0x17c [hip04_eth] LR is at hip04_tx_reclaim+0x30/0x17c [hip04_eth] pc : [<bf30c3a4>] lr : [<bf30c2f4>] psr: 600e0313 sp : c0a01d88 ip : 00000000 fp : c0601f9c r10: 00000000 r9 : c3482380 r8 : 00000001 r7 : 00000000 r6 : 000000e1 r5 : c3482000 r4 : 0000000c r3 : f2209800 r2 : 00000000 r1 : 00000000 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 32c5387d Table: 03d28c80 DAC: 55555555 Process swapper/0 (pid: 0, stack limit = 0xc0a00190) Stack: (0xc0a01d88 to 0xc0a02000) [<bf30c3a4>] (hip04_tx_reclaim [hip04_eth]) from [<bf30d2e0>] (hip04_rx_poll+0x88/0x368 [hip04_eth]) [<bf30d2e0>] (hip04_rx_poll [hip04_eth]) from [<c04c2d9c>] (net_rx_action+0x114/0x34c) [<c04c2d9c>] (net_rx_action) from [<c021eed8>] (__do_softirq+0x218/0x318) [<c021eed8>] (__do_softirq) from [<c021f284>] (irq_exit+0x88/0xac) [<c021f284>] (irq_exit) from [<c0240090>] (msa_irq_exit+0x11c/0x1d4) [<c0240090>] (msa_irq_exit) from [<c02677e0>] (__handle_domain_irq+0x110/0x148) [<c02677e0>] (__handle_domain_irq) from [<c0201588>] (gic_handle_irq+0xd4/0x118) [<c0201588>] (gic_handle_irq) from [<c0551700>] (__irq_svc+0x40/0x58) Exception stack(0xc0a01f30 to 0xc0a01f78) 1f20: c0ae8b40 00000000 00000000 00000000 1f40: 00000002 ffffe000 c0601f9c 00000000 ffffffff c0a2257c c0a22440 c0831a38 1f60: c0a01ec4 c0a01f80 c0203714 c0203718 600e0213 ffffffff [<c0551700>] (__irq_svc) from [<c0203718>] (arch_cpu_idle+0x20/0x3c) [<c0203718>] (arch_cpu_idle) from [<c025bfd8>] (cpu_startup_entry+0x244/0x29c) [<c025bfd8>] (cpu_startup_entry) from [<c054b0d8>] (rest_init+0xc8/0x10c) [<c054b0d8>] (rest_init) from [<c0800c58>] (start_kernel+0x468/0x514) Code: a40599e5 016086e2 018088e2 7660efe6 (503090e5) ---[ end trace 1db21d6d09c49d74 ]--- Kernel panic - not syncing: Fatal exception in interrupt CPU3: stopping CPU: 3 PID: 0 Comm: swapper/3 Tainted: G D O 4.4.185 #1 Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: stmmac: tc: Do not return a fragment entryJose Abreu2019-08-061-1/+1
| | | | | | | | Do not try to return a fragment entry from TC list. Otherwise we may not clean properly allocated entries. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: stmmac: Fix issues when number of Queues >= 4Jose Abreu2019-08-062-0/+8
| | | | | | | | | | When queues >= 4 we use different registers but we were not subtracting the offset of 4. Fix this. Found out by Coverity. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: stmmac: xgmac: Fix XGMAC selftestsJose Abreu2019-08-062-11/+79
| | | | | | | | | | | | | | | | | | | | | | Fixup the XGMAC selftests by correctly finishing the implementation of set_filter callback. Result: $ ethtool -t enp4s0 The test result is PASS The test extra info: 1. MAC Loopback 0 2. PHY Loopback -95 3. MMC Counters -95 4. EEE -95 5. Hash Filter MC 0 6. Perfect Filter UC 0 7. MC Filter 0 8. UC Filter 0 9. Flow Control 0 Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* be2net: disable bh with spin_lock in be_process_mccDenis Kirjanov2019-08-062-6/+2Star
| | | | | | | | | | | | | be_process_mcc() is invoked in 3 different places and always with BHs disabled except the be_poll function but since it's invoked from softirq with BHs disabled it won't hurt. v1->v2: added explanation to the patch v2->v3: add a missing call from be_cmds.c Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: cxgb3_main: Fix a resource leak in a error path in 'init_one()'Christophe JAILLET2019-08-061-1/+4
| | | | | | | | | A call to 'kfree_skb()' is missing in the error handling path of 'init_one()'. This is already present in 'remove_one()' but is missing here. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ethernet: sun4i-emac: Support phy-handle property for finding PHYsChen-Yu Tsai2019-08-061-1/+3
| | | | | | | | | | | | | The sun4i-emac uses the "phy" property to find the PHY it's supposed to use. This property was deprecated in favor of "phy-handle" in commit 8c5b09447625 ("dt-bindings: net: sun4i-emac: Convert the binding to a schemas"). Add support for this new property name, and fall back to the old one in case the device tree hasn't been updated. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/ethernet/marvell/mvmdio.c: Fix non OF caseArnaud Patard (Rtp)2019-08-051-9/+22
| | | | | | | | | | | | | | | Orion5.x systems are still using machine files and not device-tree. Commit 96cb4342382290c9 ("net: mvmdio: allow up to three clocks to be specified for orion-mdio") has replaced devm_clk_get() with of_clk_get(), leading to a oops at boot and not working network, as reported in https://lists.debian.org/debian-arm/2019/07/msg00088.html and possibly in https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=908712. Link: https://lists.debian.org/debian-arm/2019/07/msg00088.html Fixes: 96cb4342382290c9 ("net: mvmdio: allow up to three clocks to be specified for orion-mdio") Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* gve: Fix case where desc_cnt and data_cnt can get out of syncCatherine Sullivan2019-08-053-26/+20Star
| | | | | | | | | | | desc_cnt and data_cnt should always be equal. In the case of a dropped packet desc_cnt was still getting updated (correctly), data_cnt was not. To eliminate this bug and prevent it from recurring this patch combines them into one ring level cnt. Signed-off-by: Catherine Sullivan <csully@google.com> Reviewed-by: Sagi Shahar <sagis@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx5e: always initialize frag->last_in_pageQian Cai2019-08-051-3/+2Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The commit 069d11465a80 ("net/mlx5e: RX, Enhance legacy Receive Queue memory scheme") introduced an undefined behaviour below due to "frag->last_in_page" is only initialized in mlx5e_init_frags_partition() when, if (next_frag.offset + frag_info[f].frag_stride > PAGE_SIZE) or after bailed out the loop, for (i = 0; i < mlx5_wq_cyc_get_size(&rq->wqe.wq); i++) As the result, there could be some "frag" have uninitialized value of "last_in_page". Later, get_frag() obtains those "frag" and check "frag->last_in_page" in mlx5e_put_rx_frag() and triggers the error during boot. Fix it by always initializing "frag->last_in_page" to "false" in mlx5e_init_frags_partition(). UBSAN: Undefined behaviour in drivers/net/ethernet/mellanox/mlx5/core/en_rx.c:325:12 load of value 170 is not a valid value for type 'bool' (aka '_Bool') Call trace: dump_backtrace+0x0/0x264 show_stack+0x20/0x2c dump_stack+0xb0/0x104 __ubsan_handle_load_invalid_value+0x104/0x128 mlx5e_handle_rx_cqe+0x8e8/0x12cc [mlx5_core] mlx5e_poll_rx_cq+0xca8/0x1a94 [mlx5_core] mlx5e_napi_poll+0x17c/0xa30 [mlx5_core] net_rx_action+0x248/0x940 __do_softirq+0x350/0x7b8 irq_exit+0x200/0x26c __handle_domain_irq+0xc8/0x128 gic_handle_irq+0x138/0x228 el1_irq+0xb8/0x140 arch_cpu_idle+0x1a4/0x348 do_idle+0x114/0x1b0 cpu_startup_entry+0x24/0x28 rest_init+0x1ac/0x1dc arch_call_rest_init+0x10/0x18 start_kernel+0x4d4/0x57c Fixes: 069d11465a80 ("net/mlx5e: RX, Enhance legacy Receive Queue memory scheme") Signed-off-by: Qian Cai <cai@lca.pw> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* enetc: Select PHYLIB while CONFIG_FSL_ENETC_VF is setYueHaibing2019-08-031-0/+1
| | | | | | | | | | | | | | | | | | | Like FSL_ENETC, when CONFIG_FSL_ENETC_VF is set, we should select PHYLIB, otherwise building still fails: drivers/net/ethernet/freescale/enetc/enetc.o: In function `enetc_open': enetc.c:(.text+0x2744): undefined reference to `phy_start' enetc.c:(.text+0x282c): undefined reference to `phy_disconnect' drivers/net/ethernet/freescale/enetc/enetc.o: In function `enetc_close': enetc.c:(.text+0x28f8): undefined reference to `phy_stop' enetc.c:(.text+0x2904): undefined reference to `phy_disconnect' drivers/net/ethernet/freescale/enetc/enetc_ethtool.o:(.rodata+0x3f8): undefined reference to `phy_ethtool_get_link_ksettings' drivers/net/ethernet/freescale/enetc/enetc_ethtool.o:(.rodata+0x400): undefined reference to `phy_ethtool_set_link_ksettings' Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: d4fd0404c1c9 ("enetc: Introduce basic PF and VF ENETC ethernet drivers") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/ethernet/qlogic/qed: force the string buffer NULL-terminatedWang Xiayang2019-08-031-1/+1
| | | | | | | | | | | | | | | strncpy() does not ensure NULL-termination when the input string size equals to the destination buffer size 30. The output string is passed to qed_int_deassertion_aeu_bit() which calls DP_INFO() and relies NULL-termination. Use strlcpy instead. The other conditional branch above strncpy() needs no fix as snprintf() ensures NULL-termination. This issue is identified by a Coccinelle script. Signed-off-by: Wang Xiayang <xywang.sjtu@sjtu.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: samsung: Spelling s/case/cause/Geert Uytterhoeven2019-08-011-1/+1
| | | | | Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: packetengines: Fix manufacturer spelling and capitalizationGeert Uytterhoeven2019-08-012-4/+4
| | | | | | | Use "Packet Engines" consistently. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: nixge: Spelling s/Instrument/Instruments/Geert Uytterhoeven2019-08-011-1/+1
| | | | | Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ixp4xx: Spelling s/XSacle/XScale/Geert Uytterhoeven2019-08-011-1/+1
| | | | | Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: broadcom: Fix manufacturer name in Kconfig help textGeert Uytterhoeven2019-08-011-3/+3
| | | | | | | | | The help text refers to AMD instead of Broadcom, presumably because it was copied from the former. Fixes: adfc5217e9db68d3 ("broadcom: Move the Broadcom drivers") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: apple: Fix manufacturer name in Kconfig help textGeert Uytterhoeven2019-08-011-2/+2
| | | | | | | | | The help text refers to IBM instead of Apple, presumably because it was copied from the former. Fixes: 8fb6b0908176704a ("bmac/mace/macmace/mac89x0/cs89x0: Move the Macintosh (Apple) drivers") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: amd: Spelling s/case/cause/Geert Uytterhoeven2019-08-011-1/+1
| | | | | Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: 8390: Fix manufacturer name in Kconfig help textGeert Uytterhoeven2019-08-011-2/+2
| | | | | | | | | The help text refers to Western Digital instead of National Semiconductor 8390, presumably because it was copied from the former. Fixes: 644570b830266ff3 ("8390: Move the 8390 related drivers") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
* mvpp2: fix panic on module removalMatteo Croce2019-08-011-3/+2Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mvpp2 uses a delayed workqueue to gather traffic statistics. On module removal the workqueue can be destroyed before calling cancel_delayed_work_sync() on its works. Fix it by moving the destroy_workqueue() call after mvpp2_port_remove(). Also remove an unneeded call to flush_workqueue() # rmmod mvpp2 [ 2743.311722] mvpp2 f4000000.ethernet eth1: phy link down 10gbase-kr/10Gbps/Full [ 2743.320063] mvpp2 f4000000.ethernet eth1: Link is Down [ 2743.572263] mvpp2 f4000000.ethernet eth2: phy link down sgmii/1Gbps/Full [ 2743.580076] mvpp2 f4000000.ethernet eth2: Link is Down [ 2744.102169] mvpp2 f2000000.ethernet eth0: phy link down 10gbase-kr/10Gbps/Full [ 2744.110441] mvpp2 f2000000.ethernet eth0: Link is Down [ 2744.115614] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 2744.115615] Mem abort info: [ 2744.115616] ESR = 0x96000005 [ 2744.115617] Exception class = DABT (current EL), IL = 32 bits [ 2744.115618] SET = 0, FnV = 0 [ 2744.115619] EA = 0, S1PTW = 0 [ 2744.115620] Data abort info: [ 2744.115621] ISV = 0, ISS = 0x00000005 [ 2744.115622] CM = 0, WnR = 0 [ 2744.115624] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000422681000 [ 2744.115626] [0000000000000000] pgd=0000000000000000, pud=0000000000000000 [ 2744.115630] Internal error: Oops: 96000005 [#1] SMP [ 2744.115632] Modules linked in: mvpp2(-) algif_hash af_alg nls_iso8859_1 nls_cp437 vfat fat xhci_plat_hcd m25p80 spi_nor xhci_hcd mtd usbcore i2c_mv64xxx sfp usb_common marvell10g phy_generic spi_orion mdio_i2c i2c_core mvmdio phylink sbsa_gwdt ip_tables x_tables autofs4 [last unloaded: mvpp2] [ 2744.115654] CPU: 3 PID: 8357 Comm: kworker/3:2 Not tainted 5.3.0-rc2 #1 [ 2744.115655] Hardware name: Marvell 8040 MACCHIATOBin Double-shot (DT) [ 2744.115665] Workqueue: events_power_efficient phylink_resolve [phylink] [ 2744.115669] pstate: a0000085 (NzCv daIf -PAN -UAO) [ 2744.115675] pc : __queue_work+0x9c/0x4d8 [ 2744.115677] lr : __queue_work+0x170/0x4d8 [ 2744.115678] sp : ffffff801001bd50 [ 2744.115680] x29: ffffff801001bd50 x28: ffffffc422597600 [ 2744.115684] x27: ffffff80109ae6f0 x26: ffffff80108e4018 [ 2744.115688] x25: 0000000000000003 x24: 0000000000000004 [ 2744.115691] x23: ffffff80109ae6e0 x22: 0000000000000017 [ 2744.115694] x21: ffffffc42c030000 x20: ffffffc42209e8f8 [ 2744.115697] x19: 0000000000000000 x18: 0000000000000000 [ 2744.115699] x17: 0000000000000000 x16: 0000000000000000 [ 2744.115701] x15: 0000000000000010 x14: ffffffffffffffff [ 2744.115702] x13: ffffff8090e2b95f x12: ffffff8010e2b967 [ 2744.115704] x11: ffffff8010906000 x10: 0000000000000040 [ 2744.115706] x9 : ffffff80109223b8 x8 : ffffff80109223b0 [ 2744.115707] x7 : ffffffc42bc00068 x6 : 0000000000000000 [ 2744.115709] x5 : ffffffc42bc00000 x4 : 0000000000000000 [ 2744.115710] x3 : 0000000000000000 x2 : 0000000000000000 [ 2744.115712] x1 : 0000000000000008 x0 : ffffffc42c030000 [ 2744.115714] Call trace: [ 2744.115716] __queue_work+0x9c/0x4d8 [ 2744.115718] delayed_work_timer_fn+0x28/0x38 [ 2744.115722] call_timer_fn+0x3c/0x180 [ 2744.115723] expire_timers+0x60/0x168 [ 2744.115724] run_timer_softirq+0xbc/0x1e8 [ 2744.115727] __do_softirq+0x128/0x320 [ 2744.115731] irq_exit+0xa4/0xc0 [ 2744.115734] __handle_domain_irq+0x70/0xc0 [ 2744.115735] gic_handle_irq+0x58/0xa8 [ 2744.115737] el1_irq+0xb8/0x140 [ 2744.115738] console_unlock+0x3a0/0x568 [ 2744.115740] vprintk_emit+0x200/0x2a0 [ 2744.115744] dev_vprintk_emit+0x1c8/0x1e4 [ 2744.115747] dev_printk_emit+0x6c/0x7c [ 2744.115751] __netdev_printk+0x104/0x1d8 [ 2744.115752] netdev_printk+0x60/0x70 [ 2744.115756] phylink_resolve+0x38c/0x3c8 [phylink] [ 2744.115758] process_one_work+0x1f8/0x448 [ 2744.115760] worker_thread+0x54/0x500 [ 2744.115762] kthread+0x12c/0x130 [ 2744.115764] ret_from_fork+0x10/0x1c [ 2744.115768] Code: aa1403e0 97fffbbe aa0003f5 b4000700 (f9400261) Fixes: 118d6298f6f0 ("net: mvpp2: add ethtool GOP statistics") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Matteo Croce <mcroce@redhat.com> Acked-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: stmmac: Use netif_tx_napi_add() for TX polling functionFrode Isaksen2019-08-011-2/+3
| | | | | | | | | | This variant of netif_napi_add() should be used from drivers using NAPI to exclusively poll a TX queue. Signed-off-by: Frode Isaksen <fisaksen@baylibre.com> Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: mediatek: Drop unneeded dependency on NET_VENDOR_MEDIATEKGeert Uytterhoeven2019-07-311-1/+0Star
| | | | | | | | | The whole block is protected by "if NET_VENDOR_MEDIATEK", so there is no need for individual driver config symbols to duplicate this dependency. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-06-20 06:48:08 +0200