summaryrefslogtreecommitdiffstats
path: root/drivers/net/phy
Commit message (Collapse)AuthorAgeFilesLines
...
| * net: phy: Set the driver when registering an MDIO bus deviceEzequiel Garcia2014-07-251-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | mdiobus_register() registers a device which is already bound to a driver. Hence, the driver pointer should be set properly in order to track down the driver associated to the MDIO bus. This will be used to allow ethernet driver to pin down a MDIO bus driver, preventing it from being unloaded while the PHY device is running. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | dp83640: Fix receive timestamp race conditionStefan Sørensen2014-07-231-71/+102
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When timestamping received packets, rx_timestamp_work may be scheduled before the timestamps is received from the hardware resulting in the packet beeing delivered without the timestamp. This is fixed by changing the receive timestamp path: On receiving a packet that need timestamping, the rxts list is traversed. If a match is found, packet+timestamp are delivered, otherwise the packet is added to a rx_queue. When a timestamp arrives rx_queue is traversed and if a matching packet is found, it is delivered with the timestamp. Otherwise the timestamp is added to the rxts list for matching with packets arriving later. In case the hardware drops a timestamp, a workqueue regularly checks the queue for old packets and delivers them without a timestamp. Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2014-07-162-3/+47
|\| | | | | | | Signed-off-by: David S. Miller <davem@davemloft.net>
| * dp83640: Always decode received status framesStefan Sørensen2014-07-101-3/+3
| | | | | | | | | | | | | | | | | | | | | | Currently status frames are only handled when packet timestamping is enabled, but status frames are also needed for pin event timestamping. Fix by moving packet timestamping check to after status frame decode. Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: fix circular dependency in of_mdio codeDaniel Mack2014-07-021-0/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 86f6cf4127 (net: of_mdio: add of_mdiobus_link_phydev()) introduced a circular dependency between libphy and of_mdio. depmod: ERROR: <modroot>/kernel/drivers/net/phy/libphy.ko in dependency cycle! depmod: ERROR: <modroot>/kernel/drivers/of/of_mdio.ko in dependency cycle! The problem is that of_mdio.c references &mdio_bus_type and libphy now references of_mdiobus_link_phydev. Fix this by not exporting of_mdiobus_link_phydev() from of_mdio.ko. Make it a static function in mdio_bus.c instead. Signed-off-by: Daniel Mack <zonque@gmail.com> Reported-by: Jeff Mahoney <jeffm@suse.com> Fixes: 86f6cf4127 (net: of_mdio: add of_mdiobus_link_phydev()) Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | phy: Expand phy speed/duplex settings arrayLendacky, Thomas2014-07-161-1/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Expand the phy speed/duplex settings array to support more than just baseT features. This change adds entries to support the following additional speed/duplex/media types: SUPPORTED_10000baseKR_Full SUPPORTED_10000baseKX4_Full SUPPORTED_2500baseX_Full SUPPORTED_1000baseKX_Full Additionally, it changes the 10GbE baseT entry from using the hardcoded value 10000 to the SPEED_10000 define. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | dp83640: Adjust ptp event timestampsStefan Sørensen2014-07-111-0/+3
| | | | | | | | | | | | | | | | | | | | | | Event timestamp values should be adjusted by 3*reference clock period + 11 ns = 35 ns to compensate for input path and synchronization delays. So subtract 35ns from event timestamps. Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: phy: export phy_suspend and phy_resumeFlorian Fainelli2014-07-091-0/+2
| | | | | | | | | | | | | | | | | | phy_suspend and phy_resume are two commonly used helper functions that need to be exported for Ethernet drivers to be built as modules Fixes: 40755a0fce17 ("net: systemport: add suspend and resume support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ptp: Classify ptp over ip over vlan packetsStefan Sørensen2014-07-081-25/+21Star
| | | | | | | | | | | | | | | | | | This extends the ptp bpf to also match ptp over ip over vlan packets. The ptp classes are changed to orthogonal bitfields representing version, transport and vlan values to simplify matching. Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | dp83640: Get calibration pin with ptp_find_pinStefan Sørensen2014-07-021-1/+5
| | | | | | | | | | | | | | | | For consistency, use the ptp_find_pin function to get the calibration pin, not gpio_tab. Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | dp83640: Verify calibration pin assignmentStefan Sørensen2014-07-021-0/+10
| | | | | | | | | | | | | | | | | | This constraints the pin assignment to not allow the calibration function to be reassigned and only allow reassigning the calibratin pin if only one phy is connected. Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | dp83640: Increase supported perout pins to 7Stefan Sørensen2014-07-021-9/+9
| | | | | | | | | | | | | | | | This patch increases the number of supported periodic output pins from 1 to 7. The last pin is reserved for sync. Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | dp83640: Program pulsewidth2 values of perout triggers 0 and 1Stefan Sørensen2014-07-021-0/+5
|/ | | | | | | | | | | | | | | Periodic output triggers 0 and 1 of the dp83640 has a programmable duty-cycle which is controlled by the Pulsewidth2 field of the trigger data register. This field is not documented in the datasheet, but it is described in the "PHYTER Software Development Guide" section 3.1.4.1. Failing to set the field can result in unstable/no trigger output. Add programming of the Pulsewidth2 field, setting it to the same value as the Pulsewidth field for a 50% duty cycle. Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: at803x: fix coccinelle warningsFengguang Wu2014-06-231-1/+1
| | | | | | | | | | | | | drivers/net/phy/at803x.c:196:26-32: ERROR: application of sizeof to pointer sizeof when applied to a pointer typed expression gives the size of the pointer Generated by: scripts/coccinelle/misc/noderef.cocci Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Daniel Mack <zonque@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: at803x: Add support for hardware resetDaniel Mack2014-06-221-41/+144
| | | | | | | | | | | | | | | | | | | | | The AT8030 will enter a FIFO error mode if a packet is transmitted while the cable is unplugged. This hardware issue is acknowledged by the vendor, and the only proposed solution is to conduct a hardware reset via the external pin each time the link goes down. There is apparantly no way to fix up the state via the register set. This patch adds support for reading a 'reset-gpios' property from the DT node of the PHY. If present, this gpio is used to apply a hardware reset each time a 'link down' condition is detected. All relevant registers are read out before, and written back after the reset cycle. Doing this every time the link goes down might seem like overkill, but there is unfortunately no way of figuring out whether the PHY is in such a lock-up state. Hence, this is the only way of reliably fixing up things. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: at803x: use #defines for supported PHY idsDaniel Mack2014-06-221-6/+10
| | | | | | | | This removes magic values from two tables and also allows us to match against specific PHY models at runtime. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phylib: add link_change_notify callback to phy deviceDaniel Mack2014-06-221-0/+3
| | | | | | | | | Add a notify callback to inform phy drivers when the core is about to do its link adjustment. No change for drivers that do not implement this callback. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: realtek: register/unregister multiple drivers properlyJongsung Kim2014-06-121-51/+37Star
| | | | | | | | | | Using phy_drivers_register/_unregister functions is proper way to handle multiple PHY drivers registration. For Realtek PHY drivers module, it fixes incomplete current error-handlings up and adds missed unregistration for the RTL8201CP driver. Signed-off-by: Jongsung Kim <neidhard.kim@lge.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* amd-xgbe: fix unused variable compilation warning in phylib driverfrançois romieu2014-06-111-1/+1
| | | | | | | | | | | | | Fix following compilation warning: [...] CC drivers/net/phy/amd-xgbe-phy.o drivers/net/phy/amd-xgbe-phy.c:1353:30: warning: ‘amd_xgbe_phy_ids’ defined but not used [-Wunused-variable] static struct mdio_device_id amd_xgbe_phy_ids[] = { ^ Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* amd-xgbe: Configuration and build supportLendacky, Thomas2014-06-062-0/+7
| | | | | | | | | This patch provides the Kconfig and Makefile changes needed to configure and build the AMD 10GbE platform driver and the AMD 10GbE phylib driver. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* amd-xgbe: Initial AMD 10GbE phylib driverLendacky, Thomas2014-06-061-0/+1357
| | | | | | | | This patch provides the initial phylib driver in support of the AMD 10GbE device. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: of_mdio: add of_mdiobus_link_phydev()Daniel Mack2014-05-301-0/+6
| | | | | | | | | | | Add a function to walk the list of subnodes of a mdio bus and look for a node that matches the phy's address with its 'reg' property. If found, set the of_node pointer for the phy. This allows auto-probed pyh devices to be augmented by information passed in via DT. Signed-off-by: Daniel Mack <zonque@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2014-05-242-9/+11
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/bonding/bond_alb.c drivers/net/ethernet/altera/altera_msgdma.c drivers/net/ethernet/altera/altera_sgdma.c net/ipv6/xfrm6_output.c Several cases of overlapping changes. The xfrm6_output.c has a bug fix which overlaps the renaming of skb->local_df to skb->ignore_df. In the Altera TSE driver cases, the register access cleanups in net-next overlapped with bug fixes done in net. Similarly a bug fix to send ALB packets in the bonding driver using the right source address overlaps with cleanups in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: phy: resume phydev when going to RESUMINGZhangfei Gao2014-05-161-7/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With commit be9dad1f9f26604fb ("net: phy: suspend phydev when going to HALTED"), an unused PHY device will be put in a low-power mode using BMCR_PDOWN. Some Ethernet drivers might be calling phy_start() and phy_stop() from ndo_open and ndo_close() respectively, while calling phy_connect() and phy_disconnect() from probe and remove. In such a case, the PHY will be powered down during the phy_stop() call, but will fail to be powered up in phy_start(). This patch fixes this scenario. Signed-off-by: Jiancheng Xue <xuejiancheng@huawei.com> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: phy: Don't call phy_resume if phy_init_hw failedGuenter Roeck2014-05-161-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After the call to phy_init_hw failed in phy_attach_direct, phy_detach is called to detach the phy device from its network device. If the attached driver is a generic phy driver, this also detaches the driver. Subsequently phy_resume is called, which assumes without checking that a driver is attached to the device. This will result in a crash such as Unable to handle kernel paging request for data at address 0xffffffffffffff90 Faulting instruction address: 0xc0000000003a0e18 Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [c0000000003a0e18] .phy_attach_direct+0x68/0x17c LR [c0000000003a0e6c] .phy_attach_direct+0xbc/0x17c Call Trace: [c0000003fc0475d0] [c0000000003a0e6c] .phy_attach_direct+0xbc/0x17c (unreliable) [c0000003fc047670] [c0000000003a0ff8] .phy_connect_direct+0x28/0x98 [c0000003fc047700] [c0000000003f0074] .of_phy_connect+0x4c/0xa4 Only call phy_resume if phy_init_hw was successful. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: phy: make of_set_phy_supported work with genphy driverSascha Hauer2014-05-221-1/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | of_set_phy_supported allows overwiting hardware capabilities of a phy with values from the devicetree. of_set_phy_supported is called right after phy_device_register in the assumption that phy_probe is called from phy_device_register and the features of the phy are already initialized. For the genphy driver this is not true, here phy_probe is called later during phy_connect time. phy_probe will then overwrite all settings done from of_set_phy_supported Fix this by moving of_set_phy_supported to the core phy code and calling it from phy_probe. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: phy: genphy: Allow overwriting featuresSascha Hauer2014-05-221-6/+5Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | of_set_phy_supported allows overwiting hardware capabilities of a phy with values from the devicetree. This does not work with the genphy driver though because the genphys config_init function will overwrite all values adjusted by of_set_phy_supported. Fix this by initialising the genphy features in the phy_driver struct and in config_init just limit the features to the ones the hardware can actually support. The resulting features are a subset of the devicetree specified features and the hardware features. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: phy: extend fixed driver with fixed_phy_register()Thomas Petazzoni2014-05-161-0/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The existing fixed_phy_add() function has several drawbacks that prevents it from being used as is for OF-based declaration of fixed PHYs: * The address of the PHY on the fake bus needs to be passed, while a dynamic allocation is desired. * Since the phy_device instantiation is post-poned until the next mdiobus scan, there is no way to associate the fixed PHY with its OF node, which later prevents of_phy_connect() from finding this fixed PHY from a given OF node. To solve this, this commit introduces fixed_phy_register(), which will allocate an available PHY address, add the PHY using fixed_phy_add() and instantiate the phy_device structure associated with the provided OF node. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Grant Likely <grant.likely@linaro.org> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: phy: decouple PHY id and PHY address in fixed PHY driverThomas Petazzoni2014-05-161-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Until now, the fixed_phy_add() function was taking as argument 'phy_id', which was used both as the PHY address on the fake fixed MDIO bus, and as the PHY id, as available in the MII_PHYSID1 and MII_PHYSID2 registers. However, those two informations are completely unrelated. This patch decouples them. The PHY id of fixed PHYs is hardcoded to be 0x0. Ideally, a really reserved value would be nicer, but there doesn't seem to be an easy of making sure a dummy value can be assigned to the Linux kernel for such usage. The PHY address remains passed by the caller of phy_fixed_add(). Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2014-05-122-0/+15
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/ethernet/altera/altera_sgdma.c net/netlink/af_netlink.c net/sched/cls_api.c net/sched/sch_api.c The netlink conflict dealt with moving to netlink_capable() and netlink_ns_capable() in the 'net' tree vs. supporting 'tc' operations in non-init namespaces. These were simple transformations from netlink_capable to netlink_ns_capable. The Altera driver conflict was simply code removal overlapping some void pointer cast cleanups in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: mdio-gpio: warn about missing bus alias idJohan Hovold2014-05-091-0/+4
| | | | | | | | | | | | | | | | Use a sane default bus id (rather than -ENODEV) and print a warning when the bus alias id is missing. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net phy: Check for aneg completion before setting state to PHY_RUNNINGBalakumaran Kannan2014-05-021-0/+11
| | | | | | | | | | | | | | | | | | | | | | phy_state_machine should check whether auto-negotiatin is completed before changing phydev->state from PHY_NOLINK to PHY_RUNNING. If auto-negotiation is not completed phydev->state should be set to PHY_AN. Signed-off-by: Balakumaran Kannan <kumaran.4353@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | mdio_bus: fix devm_mdiobus_alloc_size exportArnd Bergmann2014-05-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 6d48f44b7b2 "mdio_bus: implement devm_mdiobus_alloc/devm_mdiobus_free" introduced a new function devm_mdiobus_alloc_size() but added an export for a different function devm_mdiobus_alloc(), which was obviously a simple mistake that leads to build error whenever this function is used from a loadable module: ERROR: "devm_mdiobus_alloc_size" [drivers/net/ethernet/ti/davinci_mdio.ko] undefined! Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: Lad, Prabhakar <prabhakar.csengg@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ARM: i.MX6: Add OF configuration support for ksz9031Hubert Chaumette2014-05-071-1/+105
| | | | | | | | | | | | | | | | Adds support for ksz9031 PAD skew configuration over devicetree. Signed-off-by: Hubert Chaumette <hchaumette@adeneo-embedded.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | mdio_bus: implement devm_mdiobus_alloc/devm_mdiobus_freeGrygorii Strashko2014-05-021-0/+67
| | | | | | | | | | | | | | | | | | | | | | | | Add a resource managed devm_mdiobus_alloc[_size]()/devm_mdiobus_free() to automatically clean up MDIO bus alocations made by MDIO drivers, thus leading to simplified MDIO drivers code. Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-and-tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2014-04-241-3/+3
|\| | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/ethernet/intel/igb/e1000_mac.c net/core/filter.c Both conflicts were simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
| * net/phy: micrel: fix bugged test on device tree loading for ksz9021Hubert Chaumette2014-04-231-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | In ksz9021_load_values_from_of() val2 to val4 aren't tested against their initialization value. This causes the test to always succeed, and this value to be used as if it was loaded from the devicetree instead of being ignored, in case of a missing/invalid property in the ethernet OF device node. As a result, the value "0" is written to the relevant registers. Change the conditions to test against the right initialization value. Signed-off-by: Hubert Chaumette <hchaumette@adeneo-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/phy: Remove return value for void functionShruti Kanetkar2014-04-233-6/+3Star
| | | | | | | | | | | | | | | | | | This was caught when using a spatch (aka. coccinelle) script written by Joe Perches. Cc: Joe Perches <joe@perches.com> Signed-off-by: Shruti Kanetkar <Shruti@Freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: phy: at803x: use genphy_config_init()Daniel Mack2014-04-211-33/+3Star
| | | | | | | | | | | | | | | | | | Use the generic bits from genphy_config_init() instead of implementing the same functionality again. Signed-off-by: Daniel Mack <zonque@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: phy: export genphy_config_init()Daniel Mack2014-04-211-1/+2
|/ | | | | | | | | This enables other drivers to call this generic implementation, and then only do specific details on top of it. Signed-off-by: Daniel Mack <zonque@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: mdio-gpio: Add support for separate MDI and MDO gpio pinsGuenter Roeck2014-04-161-3/+31
| | | | | | | | This is for a system with fixed assignments of input and output pins (various variants of Kontron COMe). Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: mdio-gpio: Add support for active low gpio pinsGuenter Roeck2014-04-161-6/+13
| | | | | | | | | Some systems using mdio-gpio may use active-low gpio pins (eg with inverters or FETs connected to all or some of the gpio pins). Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: mdio-gpio: Use devm_ functions where possibleGuenter Roeck2014-04-161-14/+5Star
| | | | | | | | This simplifies error path and deinit/removal functions. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Chris Healy <cphealy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net phylib: Remove unnecessary condition check in phyBalakumaran Kannan2014-04-091-5/+1Star
| | | | | | | | This condition check makes no difference in the code flow since 3.10 Signed-off-by: Balakumaran Kannan <kumaran.4353@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Micrel KSZ8864RMN 4-port managed switch supportPhilipp Zabel2014-04-031-12/+40
| | | | | | | | This patch adds support for the Micrel KSZ8864RMN switch to the spi_ks8995 driver. The KSZ8864RMN switch has a wider 256-byte register space. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ptp: move PTP classifier in its own fileDaniel Borkmann2014-04-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit fixes a build error reported by Fengguang, that is triggered when CONFIG_NETWORK_PHY_TIMESTAMPING is not set: ERROR: "ptp_classify_raw" [drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.ko] undefined! The fix is to introduce its own file for the PTP BPF classifier, so that PTP_1588_CLOCK and/or NETWORK_PHY_TIMESTAMPING can select it independently from each other. IXP4xx driver on ARM needs to select it as well since it does not seem to select PTP_1588_CLOCK or similar that would pull it in automatically. This also allows for hiding all of the internals of the BPF PTP program inside that file, and only exporting relevant API bits to drivers. This patch also adds a kdoc documentation of ptp_classify_raw() API to make it clear that it can return PTP_CLASS_* defines. Also, the BPF program has been translated into bpf_asm code, so that it can be more easily read and altered (extensively documented in [1]). In the kernel tree under tools/net/ we have bpf_asm and bpf_dbg tools, so the commented program can simply be translated via `./bpf_asm -c prog` where prog is a file that contains the commented code. This makes it easily readable/verifiable and when there's a need to change something, jump offsets etc do not need to be replaced manually which can be very error prone. Instead, a newly translated version via bpf_asm can simply replace the old code. I have checked opcode diffs before/after and it's the very same filter. [1] Documentation/networking/filter.txt Fixes: 164d8c666521 ("net: ptp: do not reimplement PTP/BPF classifier") Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Jiri Benc <jbenc@redhat.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* phy/at8031: enable at8031 to work on interrupt modeZhao Qiang2014-03-291-0/+30
| | | | | | | | | The at8031 can work on polling mode and interrupt mode. Add ack_interrupt and config intr funcs to enable interrupt mode for it. Signed-off-by: Zhao Qiang <B45475@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: sun4i: remove empty MDIO bus reset functionFlorian Fainelli2014-03-281-6/+0Star
| | | | | | | | sun4i_mdio_reset() does nothing useful and is optional for the MDIO bus code, so let's just remove it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: bcm7xxx: properly clear AFE_RX_LP_COUNTERFlorian Fainelli2014-03-261-1/+1
| | | | | | | | | The AFE_RX_LP_COUNTER kept the last 3 bits set, which would not properly clear the EEE LPI mode errors bits. Make sure that those bits are set to 0 to ensure the PHY timing is always good even during EEE wake-up. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: bcm7xxx: fix spurious MDIO failures during workaroundFlorian Fainelli2014-03-261-15/+15
| | | | | | | | | | | Writing first to the AFE registers, and then the VCO, RCAL, RC_CAL registers turned out to unveil some spurious MDIO read/write failures which would make the workaround partially applied. The fix is to write first to the VCO, RCAL, RC_CAL registers, and then write to the AFE registers. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-17 14:57:45 +0200