summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/iwlwifi/iwl-power.c
Commit message (Collapse)AuthorAgeFilesLines
* iwlagn: eliminate bus pointer from iwl_priv structureDon Fry2011-10-141-1/+1
| | | | | | | | | A pointer to the bus structure is still in iwl_priv. Finish cleanup and remove it. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlagn: remove dereferences of priv from transportEmmanuel Grumbach2011-08-291-2/+2
| | | | | | | | | | | | | | There are still quite a few, but much less. A few fields have been moved /copied to hw_params which sits in the shared area: * priv->cfg->base_params->num_of_ampdu_queues * priv->cfg->base_params->shadow_reg_enable * priv->cfg->sku * priv->ucode_owner Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlagn: move all iwl_is_XXX helpers to iwl-shared.hEmmanuel Grumbach2011-08-291-1/+1
| | | | | | | | Logic move after all priv->status moved to struct iwl_shared Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlagn: move iwl_suspend / iwl_resume to the transport layerEmmanuel Grumbach2011-08-291-1/+1
| | | | | | | | | These flows needs to access the APM and a few other registers that can differ between different transports. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlagn: bus layer chooses its transport layerEmmanuel Grumbach2011-08-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | Remove iwl_transport_register which was a W/A. The bus layer knows what transport to use. So now, the bus layer gives the upper layer a pointer to the iwl_trans_ops struct that it wants to use. The upper layer then, allocates the desired transport layer using iwl_trans_ops->alloc function. As a result of this, priv->trans, no longer exists, priv holds a pointer to iwl_shared, which holds a pointer to iwl_trans. This required to change all the calls to the transport layer from upper layer. While we were at it, trans_X inlines have been renamed to iwl_trans_X to avoid confusions, which of course required to rename the functions inside the transport layer because of conflicts in names. So the static API functions inside the transport layer implementation have been renamed to iwl_trans_pcie_X. Until now, the IRQ / Tasklet were initialized in iwl_transport_layer. This is confusing since the registration doesn't mean to request IRQ, so I added a handler for that. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlagn: priv->mutex moves to iwl_sharedEmmanuel Grumbach2011-08-291-1/+1
| | | | | | | | Since it is used by all the layers, it needs to move to iwl_shared. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlagn: priv->status moves to iwl_sharedEmmanuel Grumbach2011-08-291-3/+3
| | | | | | | | Since it is used by all the layers, it needs to move to iwl_shared. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlagn: introduce iwl-shared.hEmmanuel Grumbach2011-08-291-0/+1
| | | | | | | | | | | | | | | | | | | | It will hold declaration of functions and forward declaration of struct that are used by several layers. This will allow modules not to include iwl_priv. iwl_bus and iwl_trans are still visible to all. All the layers share the module parameters, move the struct to iwl-shared.h. Also add all module parameters to iwl_mod_params instead of having them as global static. This includes * debug_level * ant_coupling * bt_ch_announce * wanted_ucode_alternative Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlagn: 5000 do not support idle modeWey-Yi Guy2011-08-021-1/+2
| | | | | | | | | | | | | | | | | | | | 5000 series has issue supporting power save idle mode: commit 9dc2153315650eae220898668b6aa56a25c130be iwlwifi: always support idle mode for agn devices For agn devices, always support idle mode which help power consumption in idle unassociated state. the above changes cause 5000 become not stable when power management is "on" http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2312 Cc: stable@kernel.org #2.6.39, #3.0.0 Reported-by: Devin J Pohly <djpohly+iwl@gmail.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlagn: implement WoWLANJohannes Berg2011-07-211-1/+3
| | | | | | | | | | | | Implement WoWLAN support in iwlagn. The device supports a number of wakeup triggers and can do GTK rekeying when asleep (if HW crypto is used). Unfortunately, we need to disconnect from the AP after resume since we can't yet get all the info out of the wowlan uCode to stay connected safely. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
* iwlagn: simplify the bus architectureEmmanuel Grumbach2011-07-211-1/+1
| | | | | | | | | | | | | | | | | | | Call iwl_probe with a ready iwl_bus struct. This means that the bus layer assigns the irq, dev and iwl_bus_ops pointers to iwl_bus before giving it to iwl_probe. The device specific struct is allocated together with the common iwl_bus struct by the bus specific layer. The pointer to the aggregate struct is passed to the upper layer that holds a pointer to iwl_bus instead of an embedded iw_bus. The private data given to the PCI subsystem is now iwl_bus and not iwl_priv. Provide bus_* inliners on the way in order to simplify the syntax. Rename iwl-pci.h -> iwl-bus.h since it is bus agnostic and represent the external of the bus layer. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
* iwlagn: transport layer receives struct iwl_trans*Emmanuel Grumbach2011-07-211-1/+1
| | | | | | | | | It still holds a pointer to iwl_priv. But hopefully this will disappear at some point. Also add the multiple inclusion protection to iwl-trans.h that was forgotten. Move iwl-trans structures to iwl-trans.h Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
* iwlagn: remove the indirection for update_chain_flagsFry, Donald H2011-07-111-3/+3
| | | | | | | | Not needed since the driver split. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlagn: provide heplers to access the transport opsEmmanuel Grumbach2011-07-111-1/+2
| | | | | | | | This removes the for priv->trans.ops->... Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlagn: consolidate the API that sends host commands and move to transportEmmanuel Grumbach2011-07-111-1/+1
| | | | | | | | | | | | | | | Now, there are only two functions to send a host command: * send_cmd that receives a iwl_host_cmd * send_cmd_pdu that builds the iwl_host_cmd itself and received flags The flags CMD_ASYNC / CMD_SYNC / CMD_WANT_SKB are not changed by the API functions. Kill the unused flags CMD_SIZE_NORMAL / CMD_NO_SKB on the way. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlagn: Add power_level module parameterWey-Yi Guy2011-06-181-3/+9
| | | | | | | Add power_level module parameter to set the default power save level. Power save level has range from 1 - 5, default power save level is 1. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
* iwlagn: move PCI power related functions to the PCI layerWey-Yi Guy2011-06-181-6/+4Star
| | | | | | | | Continue to popule the PCI layer and the iwl_bus_ops with the power related stuff. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
* iwlagn: move no_sleep_autoadjust as part of iwlagn_mod_paramsWey-Yi Guy2011-06-111-11/+2Star
| | | | | | | Move no_sleep_autoadjust module parameter into iwlagn_mod_params structure along with all the other iwlagn module parameters Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
* iwlagn: temperature should be measure for all _agn devicesWey-Yi Guy2011-04-181-4/+2Star
| | | | | | | Thermal throttling functions are available for all _agn devices, call the functions directly. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
* iwlagn: remove most BUG_ON instancesJohannes Berg2011-04-181-3/+4
| | | | | | | | | | | | | | | There are a number of things in the driver that may result in a BUG(), which is suboptimal since it's hard to get debugging information out of the driver in that case and the user experience is also not good :-) Almost all BUG_ON instances can be converted to WARN_ON with a few lines of appropriate error handling, so do that instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
* iwlagn: all _agn devices support power save modeWey-Yi Guy2011-04-081-3/+1Star
| | | | | | Remove broken_power_save checking Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
* iwlagn: change Copyright to 2011Wey-Yi Guy2011-04-071-1/+1
| | | | | Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: split the drivers for agn and legacy devices 3945/4965Wey-Yi Guy2011-02-211-3/+0Star
| | | | | | | | | | | | | | | | | | Intel WiFi devices 3945 and 4965 now have their own driver in the folder drivers/net/wireless/iwlegacy Add support to build these drivers independently of the driver for AGN devices. Selecting the 3945 builds iwl3945.ko and iwl_legacy.ko, and selecting the 4965 builds iwl4965.ko and iwl_legacy.ko. iwl-legacy.ko contains code shared between both devices. The 3945 is an ABG/BG device, with no support for 802.11n. The 4965 is a 2x3 ABGN device. Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Acked-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
* Revert "iwlwifi: split the drivers for agn and legacy devices 3945/4965"Wey-Yi Guy2011-02-211-0/+3
| | | | This reverts commit aa833c4b1a928b8d3c4fcc2faaa0d6b81ea02b56.
* iwlwifi: split the drivers for agn and legacy devices 3945/4965Wey-Yi Guy2011-02-211-3/+0Star
| | | | | | | | | | | | | | | | | | Intel WiFi devices 3945 and 4965 now have their own driver in the folder drivers/net/wireless/iwlegacy Add support to build these drivers independently of the driver for AGN devices. Selecting the 3945 builds iwl3945.ko and iwl_legacy.ko, and selecting the 4965 builds iwl4965.ko and iwl_legacy.ko. iwl-legacy.ko contains code shared between both devices. The 3945 is an ABG/BG device, with no support for 802.11n. The 4965 is a 2x3 ABGN device. Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Acked-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
* iwlwifi: always support idle mode for agn devicesWey-Yi Guy2011-01-311-2/+1Star
| | | | | | | For agn devices, always support idle mode which help power consumption in idle unassociated state. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
* iwlwifi: introduce iwl_advanced_bt_coexist()Stanislaw Gruszka2011-01-281-4/+2Star
| | | | | | | | | We use priv->cfg->bt_params && priv->cfg->bt_params->advanced_bt_coexist conditional in few places, merge it into one function. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: advance power management supportWey-Yi Guy2010-11-241-5/+63
| | | | | | | | For 6000g2b and up, adding advance power management support for better power consumption Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: power management checking for shadow registerWey-Yi Guy2010-11-241-0/+10
| | | | | | | | If shadow register is enable, modify the power management command to inform uCode Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: consider BT for power managementWey-Yi Guy2010-11-241-0/+17
| | | | | | | Check the BT PSPoll flag when fill PM command to uCode Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: defer update power mode while scanStanislaw Gruszka2010-11-151-35/+60
| | | | | | | | | Do not set power mode when scanning, and defer that when scan finish. We still set power mode in force case i.e. when device is overheated. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlagn: reduce redundant parameter definitionsWey-Yi Guy2010-10-061-2/+2
| | | | | | | | | | | | | move paramater definitions to a device paramater structure only leaving the device name, which antennas are used and what firmware file to use in the iwl_cfg structure. this will not completely remove the redundancies but greatly reduce them for devices that only vary by name or antennas. the parameters that are more likely to change within a given device family are left in iwl_cfg. also separate bt param structure added to help reduce more. Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
* iwlwifi: fix thermal throttling related power management operationWey-Yi Guy2010-08-241-7/+5Star
| | | | | | | | | | The current approach is very broken because it adds an often-used code path that will not initialise "cmd" at all. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Shanyu Zhao <shanyu.zhao.intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: separate thermal throttling functionWey-Yi Guy2010-08-241-631/+9Star
| | | | | | | | | "Thermal Throttling" is an advance feature which only available for newer _agn devices. Move from iwl-core to iwl-agn for better code organization. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge branch 'master' of ↵John W. Linville2010-05-171-4/+1Star
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
| * iwlwifi: remove useless priv->vif checkJohannes Berg2010-05-111-4/+1Star
| | | | | | | | | | | | | | | | This check is not useful, since we now no longer dereference priv->vif at this spot. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
* | Merge branch 'master' of ↵John W. Linville2010-04-151-5/+5
|\| | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: Documentation/feature-removal-schedule.txt drivers/net/wireless/ath/ath5k/phy.c drivers/net/wireless/wl12xx/wl1271_main.c
| * iwlwifi: remove trailing space in messagesFrans Pop2010-04-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | Includes minor improvements in debugging messages in iwl-4965.c, function iwl4965_is_temp_calib_needed(). Signed-off-by: Frans Pop <elendil@planet.nl> Cc: Zhu Yi <yi.zhu@intel.com> Cc: Reinette Chatre <reinette.chatre@intel.com> Cc: Intel Linux Wireless <ilw@linux.intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
| * iwlwifi: Generic approach to measure temperatureWey-Yi Guy2010-03-251-4/+4
| | | | | | | | | | | | | | | | In stead of checking for 4965 and do KELVIN_TO_CELSIUS conversation, add .cfg parameter for more generic approach. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
* | include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-301-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* iwlwifi: iwl_power_update_mode always hold mutexReinette Chatre2010-01-291-1/+1
| | | | | | | | iwl_power_update_mode expects to be called with mutex held, for example to protect priv->vif. Only one caller currently does not do this, fix this. Also, add a comment to iwl_power_update_mode to indicate this requirement. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
* iwlwifi: no need to test iw_mode in power savingJohannes Berg2010-01-291-2/+1Star
| | | | | | | mac80211 will only enable powersaving for station mode. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
* mac80211: wait for beacon before enabling powersaveJohannes Berg2010-01-261-1/+1
| | | | | | | | | | | | | | | | Because DTIM information is required for powersave but is only conveyed in beacons, wait for a beacon before enabling powersave, and change the way the information is conveyed to the driver accordingly. mwl8k doesn't currently seem to implement PS but requires the DTIM period in a different way; after talking to Lennert we agreed to just have mwl8k do the parsing itself in the finalize_join work. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: update copyright year to 2010Reinette Chatre2010-01-191-1/+1
| | | | | Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: update reply_statistics_cmd with 'clear' parameterWey-Yi Guy2009-11-181-1/+1
| | | | | | | | | | | | | | | | | | When issue REPLY_STATISTICS_CMD to uCode, two possible flag can be set in the configuration flags bit 0: Clear statistics 0: Do not clear Statistics counters 1: Clear to zero Statistics counters Allow "clear" parameter to be set from the caller. Add debugfs file to clear the statistics counters to help monitor and debug the uCode behavior. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: remove duplicated defineWey-Yi Guy2009-10-271-2/+2
| | | | | | | | | | Duplicated define for listen interval (IWL_CONN_MAX_LISTEN_INTERVAL and IWL_CONN_LISTEN_INTERVAL), remove IWL_CONN_LISTEN_INTERVAL Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Reported-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: choose thermal throttle method based on device configWey-Yi Guy2009-10-271-6/+2Star
| | | | | | | | | Using device configuration structure to decide the type of thermal throttle method for the device. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: rework for static power saveWey-Yi Guy2009-10-271-22/+53
| | | | | | | | | | | | | | | | | | | | | | | | | For static power save, the actual intervals are calculated by driver based on the default table and DTIM flag, then sent to uCode when the scheme is changed. Three tables are defined based on DTIM period. 1. DTIM 0 - 2 2. DTIM 3 - 10 3. DTIM > 11 The actual number of DTIM a station may miss may not exceed the following: . Only 1 DTIM may be skipped at PI=4 when allowed . Only 2 DTIMs may be skipped at PI=5 when allowed . DTIM may be skipped only 5 sec after last activity . DTIM may be skipped only 30 sec after connection establishment Only allow user to override the power_level when rf is ready to make sure power level gets changed upon request. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: reliable entering of critical temperature stateWey-Yi Guy2009-10-071-30/+116
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When uCode detects critical temperature it should send "card state notification" interrupt to driver and then shut itself down to prevent overheating. There is a race condition where uCode shuts down before it can deliver the interrupt to driver. Additional method provided here for driver to enter CT_KILL state based on temperature reading. How it works: Method 1: If driver receive "card state notification" interrupt from uCode; it enters "CT_KILL" state immediately Method 2: If the last temperature report by Card reach Critical temperature, driver will send "statistic notification" request to uCode to verify the temperature reading, if driver can not get reply from uCode within 300ms, driver will enter CT_KILL state automatically. Method 3: If the last temperature report by Card did not reach Critical temperature, but uCode already shut down due to critical temperature. All the host commands send to uCode will not get process by uCode; when command queue reach the limit, driver will check the last reported temperature reading, if it is within pre-defined margin, enter "CT_KILL" state immediately. In this case, when uCode ready to exit from "CT_KILL" state, driver need to restart the adapter in order to reset all the queues and resume normal operation. One additional issue being address here, when system is in CT_KILL state, both tx and rx already stopped, but driver still can send host command to uCode, it will flood the command queue since card was not responding; adding STATUS_CT_KILL flag to reject enqueue host commands to uCode if it is in CT_KILL state, when uCode is ready to come out of CT_KILL, driver will clear the STATUS_CT_KILL bit and allow enqueue the host commands to uCode to recover from CT_KILL state. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: support idle for 6000 series hwJohannes Berg2009-10-071-0/+3
| | | | | | | | | | | | | | Using powersave while idle saves a lot of power, but we've had problems with this on some cards (5150 has been reported to be problematic). However, on the new 6000 series we're seeing no problems, so for now let that hardware benefit from idle mode, we can look at the problems with other hardware one by one and then enable those once we figure out the problems. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-19 22:40:05 +0200