summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/rt2x00/rt2x00pci.h
Commit message (Collapse)AuthorAgeFilesLines
* rt2x00: Allow dynamic addition of PCI/USB IDs.Gertjan van Wingerde2011-04-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | Both USB and PCI drivers allow a system administrator to dynamically add USB/PCI IDs to the device table that a driver supports via the /sys/bus/{usb,pci,pci_express}/drivers/<driver-name>/new_id files. However, for the rt2x00 drivers using this method currently crashes the system with a NULL pointer failure. This is due to the set-up of rt2x00 where the probe functions require a rt2x00_ops structure in the driver_info field of the probed device. As this field is empty for the dynamically added devices this fails for these devices. Fix this by introducing driver-specific probe wrappers that do nothing but calling the bus-specific probe functions with the rt2x00_ops structure as an argument, rather than depending on the driver_info field. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Decrease association time for USB devicesIvo van Doorn2011-04-191-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | When powersaving is enabled, assocaition times are very high (for WPA2 networks, the time can easily be around the 3 seconds). This is caused, because the flushing of the queues takes too much time. Without the flushing callback mac80211 assumes a timeout of 100ms while scanning. Limit all flush waiting loops to the same maximum. We can apply this maximum by passing the drop status to the driver, which makes sure the driver performs extra actions during the waiting for the queue to become empty. After these changes, association times fall within the healthy range of ~0.6 seconds with powersaving enabled. The difference between association time between powersaving enabled and disabled is now only ~0.1 second (which can also be due to the measuring method). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Limit rt2x00pci rxdone processing to 16 entries at onceHelmut Schaa2011-04-041-1/+4
| | | | | | | | | | | Instead of receiving an unlimited number of frames, stop after 16 entries and reschedule the rxdone tasklet. This allows other tasklets to be run inbetween. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Fix firmware loading regression on x86_64.Wolfgang Kufner2010-12-131-1/+1
| | | | | | | | | | | | | | Commit 6175ddf06b6172046a329e3abfd9c901a43efd2e changes the way memcpy_toio() works for x86_64, causing firmware loading to fail for some Ralink WLAN devices with the rt2800pci driver since linux 2.6.34. This causes the log message: "phy0 -> rt2800pci_load_firmware: Error - PBF system register not ready.". Fix this by using __iowrite32_copy instead of memcpy_toio(). Signed-off-by: Wolfgang Kufner <wolfgang.kufner@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Move common txdone handling to rt2x00lib_txdone.Gertjan van Wingerde2010-06-301-8/+0Star
| | | | | | | | | | Now that the write_tx_data functions are merged, also merge the relevant parts of the txdone handling into common code, rather than {usb,pci} specific code. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Merge PCI and USB versions of write_tx_data into single function.Gertjan van Wingerde2010-06-301-10/+0Star
| | | | | | | | | Now that rt2x00pci_write_tx_data and rt2x00usb_write_tx_data are similar we can merge them in a single function in rt2x00queue.c. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Properly reserve room for descriptors in skbs.Gertjan van Wingerde2010-06-031-0/+8
| | | | | | | | | | Instead of fiddling with the skb->data pointer and thereby risking out of bounds accesses, properly reserve the space needed in an skb for descriptors. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
* rt2x00: add txdesc parameter to write_tx_dataHelmut Schaa2010-04-161-1/+2
| | | | | | | | | Extend the write_tx_data callback with a txdesc parameter to allow access to the tx desciptor while preparing the tx data. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Reorganize RT chipset setting for PCI/SOC devices.Gertjan van Wingerde2010-02-151-0/+1
| | | | | | | | | | | Don't set the RT chipset for a device from within the generic PCI/SOC code, but rather from the individual drivers, so that individual drivers have more control over what RT chipset is set. Preparation for chip handling updates for rt2800 devices. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Update copyright statements.Gertjan van Wingerde2009-11-111-1/+1
| | | | | | | | | | | | | | | | As mentioned on the linux-wireless mailing list, the current copyright statements in the rt2x00 are meaningless, as the rt2x00 project is not even a formal legal entity. Therefore it is better to replace the existing copyright statements with copyright statements for the people that actually wrote the code. Note: Updated to the best of my knowledge with respect to who contributed considerable amounts of code. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> CC: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: move REGISTER_BUSY_* definitions to rt2x00.hBartlomiej Zolnierkiewicz2009-11-061-9/+0Star
| | | | | | | Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: fix rt2x00pci_register_multi[read,write]() argumentsBartlomiej Zolnierkiewicz2009-11-061-8/+7Star
| | | | | | | | | | Change type of 'length' argument from u16 to u32 (all arguments match rt2x00usb_register_multi[read,write]() ones now). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Update copyright year to 2009Ivo van Doorn2009-01-291-1/+1
| | | | | Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Cleanup indirect register accessIvo van Doorn2008-11-251-0/+18
| | | | | | | | | | | | | | All code which accessed indirect registers was similar in respect to the for-loop, the given timeout, etc. Move it into a seperate function, which for PCI drivers can be moved into rt2x00pci. This allows us to cleanup the cleanup the code further by removing the goto statementsand making the codepath look a bit nicer. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Cleanup TX/RX entry handlingIvo van Doorn2008-11-211-11/+0Star
| | | | | | | | | | | | | | | | Merge the callback functions init_txentry() and init_rxentry(). This makes life in rt2x00lib a lot simpler and we can cleanup several functions. rt2x00pci contained "fake" FIELD definitions for descriptor words. This is not flexible since it assumes the driver will always have the same field to indicate if a driver is available or not. This should be dependent on the driver, and we should add a callback function for this. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Remove debugfs CSR access wrappersIvo van Doorn2008-11-101-4/+4
| | | | | | | | | | Move calculation of CSR register offset into rt2x00debug.c and remove the wrapper functions from each individual driver. (Except rt2500usb, which still needs to wrap for the different value type argument). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge branch 'master' of ↵David S. Miller2008-07-181-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: Documentation/powerpc/booting-without-of.txt drivers/atm/Makefile drivers/net/fs_enet/fs_enet-main.c drivers/pci/pci-acpi.c net/8021q/vlan.c net/iucv/iucv.c
| * rt2x00: treat firmware data as constDavid Woodhouse2008-07-101-1/+1
| | | | | | | | Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* | rt2x00: Cleanup symbol exportsIvo van Doorn2008-06-261-9/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | With a bit of code moving to rt2x00lib within the TX and RX paths we can now remove a lot of EXPORT_SYMBOL_GPL() statements. This cleans up the interface between rt2x00lib and the drivers and has the additional benefit that rt2x00pci and rt2x00usb are trimmed down in size as well since they have less to do. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | rt2x00: Replace statically allocated DMA buffers with mapped skb's.Gertjan van Wingerde2008-06-261-3/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | The current PCI drivers require a lot of pre-allocated DMA buffers. Reduce this by using dynamically mapped skb's (using pci_map_single) instead of the pre- allocated DMA buffers that are allocated at device start-up time. At the same time move common RX path code into rt2x00lib from rt2x00pci and rt2x00usb, as the RX paths now are now almost the same. Signed-off-by: Gertjan van Wingerde <gwingerde@kpnplanet.nl> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | rt2x00: Move generic TX frame writing code into rt2x00queueIvo van Doorn2008-06-141-4/+7
| | | | | | | | | | | | | | | | | | The write_tx_data functions in rt2x00pci and rt2x00usb have a lot in common. This moves that duplicate code into rt2x00queue_write_tx_frame(). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | mac80211: move TX info into skb->cbJohannes Berg2008-05-221-5/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch converts mac80211 and all drivers to have transmit information and status in skb->cb rather than allocating extra memory for it and copying all the data around. To make it fit, a union is used where only data that is necessary for all steps is kept outside of the union. A number of fixes were done by Ivo, as well as the rt2x00 part of this patch. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | rt2x00: Merge RX and TX entry private dataIvo van Doorn2008-05-221-19/+3Star
| | | | | | | | | | | | | | | | | | | | With the pending removal of the tx_control structure we can merge the RX and TX entry private data structure in advance. This will temporarily increase the required memory for the queue, but that overhead will only be limited. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | rt2x00: Fix kernel-docIvo van Doorn2008-05-071-2/+4
|/ | | | | | | Add missing kernel-doc variables for structures/functions. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Fix Descriptor DMA initializationIvo van Doorn2008-02-291-2/+4
| | | | | | | | | | | | | As Adam Baker reported the DMA address for the descriptor base was incorrectly initialized in the PCI drivers. Instead of the DMA base for the descriptor, the DMA base for the data was passed resulting in a broken TX/RX state for PCI drivers. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: make csr_cache and csr_addr an unionIvo van Doorn2008-02-291-4/+4
| | | | | | | | | | | The csr_cache and csr_addr pointers are both the same size and they are never used both by the same driver. This makes them a nice candidate for an union. We could merge into 1 pointer, but that would either upset sparse, or require a lot of __force casts. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Move beacon and atim queue defines into rt2x00Ivo van Doorn2008-02-291-6/+0Star
| | | | | | | | | | | | | | | As Johannes Berg indicated the BEACON and AFTER_BEACON queue indeces in mac80211 should be removed because they are too hardware specific. This patch adds the queue index defines into rt2x00queue.h and removes the dependency of the defines inside mac80211.h. Also move rt2x00pci_beacon_update() into rt2400pci and rt2500pci individually since it is no longer a generic function since rt61 and rt2800 no longer use that. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Queue handling overhaulIvo van Doorn2008-02-291-5/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This introduces a big queue handling overhaul, this also renames "ring" to "queues". Move queue handling into rt2x00queue.c and the matching header, use Kerneldoc to improve rt2x00 library documentation. Access to the queues is now protected under a spinlock, this to prevent race conditions which could corrupt the indexing system of the queue. Each queue entry allocates x bytes for driver/device specific data, this cleans up the queue structure significantly and improves code readability. rt2500usb no longer needs 2 entries in the beacon queue to correctly send out the guardian byte. This is now handled in the entry specific structure. rt61 and rt73 now use the correct descriptor size for beacon frames, since this data is written into the registers not the entire TXD descriptor was used but instead of a subset of it named TXINFO. Finally this also fixes numerous other bugs related to incorrect beacon handling or beacon related code. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Update copyright noticeIvo van Doorn2008-02-291-1/+1
| | | | | Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Move duplicate code into rt2x00pci_txdone()Ivo van Doorn2008-01-291-1/+3
| | | | | | | | | | | | rt2400pci, rt2500pci and rt61 require different txdone handling, but the code that pushes the frame upstream and cleans up the entry is identical to all of them. This will create the function rt2x00pci_txdone() to remove the duplicate code. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Unconstify rt2x00devAdam Baker2008-01-291-4/+4
| | | | | | | | | | Some register accesses need rt2x00dev to be non-const they all need modifying so the prototype is consistent. Signed-off-by: Adam Baker <linux@baker-net.org.uk> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [RT2x00]: add driver for Ralink wireless hardwareIvo van Doorn2007-10-111-0/+127
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-12 06:36:56 +0200