summaryrefslogtreecommitdiffstats
path: root/drivers/net
Commit message (Collapse)AuthorAgeFilesLines
* ath9k: use pci_dev->subsystem_deviceSergei Shtylyov2011-08-081-3/+2Star
| | | | | | | | | The driver reads PCI subsystem ID from the PCI configuration register while it's already stored by the PCI subsystem in the 'subsystem_device' field of 'struct pci_dev'... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: remove redundant variable scan_table_idxBing Zhao2011-08-082-13/+0Star
| | | | | | | | | mwifiex_get_bss_info() routine updates variable 'info->scan_table_idx' but it is never used. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* libertas_usb: use USB interface as parent deviceDaniel Drake2011-08-081-1/+1
| | | | | | | | | | | | Currently, "udevadm info -a -p /sys/class/net/wlan0" doesn't mention the usb8xxx or libertas driver anywhere. This makes writing udev rules a bit uncomfortable. Using the USB interface as the parent device corrects the hierarchy. Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* libertas: link mesh device to wiphyDaniel Drake2011-08-088-43/+117
| | | | | | | | | | | | | The mesh device is now exposed as an interface of the wiphy. This exposes the mesh device to the cfg80211 interface, allowing mesh channel selection to be reimplemented, and available to NetworkManager as it was before. Some header tweaking was needed in order to implement lbs_mesh_activated(). Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: remove wireless.h inclusion and fix resulting bugsBing Zhao2011-08-087-28/+19Star
| | | | | | | | | replace IW_MAX_AP & IW_CUSTOM_MAX with local definitions and remove usage of struct iw_statistics. Cc: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: add wext includeJohannes Berg2011-08-081-0/+1
| | | | | | | | | | | | | | In trying to remove the wext includes from mac80211 and cfg80211 I found that mwifiex currently uses them. This is wrong, it shouldn't, but to not break it completely include wext there. Please remove this and fix all the resulting bugs. Cc: Bing Zhao <bzhao@marvell.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1251: remove wext dependenciesJohannes Berg2011-08-082-2/+2
| | | | | | | | This driver uses IW_ESSID_MAX_SIZE when it should be using IEEE80211_MAX_SSID_LEN instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl12xx: remove wext dependenciesJohannes Berg2011-08-085-9/+9
| | | | | | | | | This driver uses IW_ESSID_MAX_SIZE when it should be using IEEE80211_MAX_SSID_LEN instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rndis_wlan: remove wireless extensions inclusionsJohannes Berg2011-08-081-2/+0Star
| | | | | | | | | linux/wireless.h and net/iw_handler.h headers are for wireless extensions only, so mac80211 drivers shouldn't be including them. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43legacy: remove wireless extensions inclusionsJohannes Berg2011-08-082-2/+0Star
| | | | | | | | | | linux/wireless.h and net/iw_handler.h headers are for wireless extensions only, so mac80211 drivers shouldn't be including them. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43: remove wireless extensions inclusionsJohannes Berg2011-08-081-1/+0Star
| | | | | | | | | linux/wireless.h and net/iw_handler.h headers are for wireless extensions only, so mac80211 drivers shouldn't be including them. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: remove wireless extensions inclusionsJohannes Berg2011-08-081-1/+0Star
| | | | | | | | | | linux/wireless.h and net/iw_handler.h headers are for wireless extensions only, so mac80211 drivers shouldn't be including them. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlegacy: remove wireless extensions inclusionsJohannes Berg2011-08-089-9/+0Star
| | | | | | | | | linux/wireless.h and net/iw_handler.h headers are for wireless extensions only, so mac80211 drivers shouldn't be including them. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlagn: remove wireless extensions inclusionsJohannes Berg2011-08-087-7/+0Star
| | | | | | | | | linux/wireless.h and net/iw_handler.h headers are for wireless extensions only, so mac80211 drivers shouldn't be including them. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* cfg80211: split wext compatibility to separate headerJohannes Berg2011-08-082-0/+2
| | | | | | | | | | | A lot of drivers erroneously use wext constants and don't notice since cfg80211.h includes them. Make this more split up so drivers needing wext compatibility from cfg80211 need to explicitly include that from cfg80211-wext.h. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next ↵John W. Linville2011-08-0316-40/+84
|\ | | | | | | into for-davem
| * iwlagn: 5000 do not support idle modeWey-Yi Guy2011-08-023-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 5000 series has issue supporting power save idle mode: commit 9dc2153315650eae220898668b6aa56a25c130be iwlwifi: always support idle mode for agn devices For agn devices, always support idle mode which help power consumption in idle unassociated state. the above changes cause 5000 become not stable when power management is "on" http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2312 Cc: stable@kernel.org #2.6.39, #3.0.0 Reported-by: Devin J Pohly <djpohly+iwl@gmail.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * rt2x00: fix usage of NULL queueStanislaw Gruszka2011-08-021-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | We may call rt2x00queue_pause_queue(queue) with queue == NULL. Bug was introduced by commit 62fe778412b36791b7897cfa139342906fbbf07b "rt2x00: Fix stuck queue in tx failure case" . Cc: stable@kernel.org # 3.0+ Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * rt2x00: Fix compilation without CONFIG_RT2X00_LIB_CRYPTOHelmut Schaa2011-08-021-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | This was introduced by commit 77b5621bac4a56b83b9081f48d4e7d1accdde400 (rt2x00: Don't use queue entry as parameter when creating TX descriptor.) Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Reported-by: Randy Dunlap <rdunlap@xenotime.net> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlagn: sysfs couldn't find the priv pointerEmmanuel Grumbach2011-08-021-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This bug has been introduced by: d593411084a56124aa9d80aafa15db8463b2d8f7 Author: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Date: Mon Jul 11 10:48:51 2011 +0300 iwlagn: simplify the bus architecture Revert part of the buggy patch: dev_get_drvdata will now return iwl_priv as it did before the patch. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Tested-by: Daniel Halperin <dhalperi@cs.washington.edu> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * rt2x00: rt2800: fix zeroing skb structureStanislaw Gruszka2011-08-011-2/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | We should clear skb->data not skb itself. Bug was introduced by: commit 0b8004aa12d13ec750d102ba4082a95f0107c649 "rt2x00: Properly reserve room for descriptors in skbs". Cc: stable@kernel.org # 2.6.36+ Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * rtlwifi: Fix kernel oops on ARM SOCLarry Finger2011-08-011-9/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This driver uses information from the self member of the pci_bus struct to get information regarding the bridge to which the PCIe device is attached. Unfortunately, this member is not established on all architectures, which leads to a kernel oops. Skipping the entire block that uses the self member to determine the bridge vendor will only affect RTL8192DE devices as that driver sets the ASPM support flag differently when the bridge vendor is Intel. If the self member is available, there is no functional change. This patch fixes Bugzilla No. 40212. Reported-by: Hubert Liao <liao.hubertt@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@kernel.org> [back to 2.6.38] Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k: skip ->config_pci_powersave() if PCIe port has ASPM disabledStanislaw Gruszka2011-08-015-13/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We receive many bug reports about system hang during suspend/resume when ath9k driver is in use. Adrian Chadd remarked that this problem happens on systems that have ASPM disabled. To do not hit the bug, skip doing ->config_pci_powersave magic if PCIe downstream port device, which ath9k device is connected to, has ASPM disabled. Bug was introduced by: commit 53bc7aa08b48e5cd745f986731cc7dc24eef2a9f Author: Vivek Natarajan <vnatarajan@atheros.com> Date: Mon Apr 5 14:48:04 2010 +0530 ath9k: Add support for newer AR9285 chipsets. Patch should address: https://bugzilla.kernel.org/show_bug.cgi?id=37462 https://bugzilla.kernel.org/show_bug.cgi?id=37082 https://bugzilla.redhat.com/show_bug.cgi?id=697157 however I did not receive confirmation about that, except from Camilo Mesias, whose system stops hang regularly with this patch (but still hangs from time to time, but this is probably some other bug). Tested-by: Camilo Mesias <camilo@mesias.co.uk> Cc: stable@kernel.org # 2.6.35+ Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlegacy: set tx power after rxon_assocStanislaw Gruszka2011-08-012-3/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | If settings of tx power was deferred during scan or changing channel we have to setup them during commit rxon. Fix problem on 3945 (4965 already has this fix). Optimize code to apply tx settings only when tx power was actually changed. Cc: stable@kernel.org # 2.6.39+ Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k: initialize tx chainmask before testing channel tx power valuesFelix Fietkau2011-08-011-0/+2
| | | | | | | | | | | | | | | | | | With an uninitialized chainmask, the per-channel power will only contain the power limits for a single chain instead of the combined tx power. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2011-07-2820-223/+318
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (32 commits) tg3: Remove 5719 jumbo frames and TSO blocks tg3: Break larger frags into 4k chunks for 5719 tg3: Add tx BD budgeting code tg3: Consolidate code that calls tg3_tx_set_bd() tg3: Add partial fragment unmapping code tg3: Generalize tg3_skb_error_unmap() tg3: Remove short DMA check for 1st fragment tg3: Simplify tx bd assignments tg3: Reintroduce tg3_tx_ring_info ASIX: Use only 11 bits of header for data size ASIX: Simplify condition in rx_fixup() Fix cdc-phonet build bonding: reduce noise during init bonding: fix string comparison errors net: Audit drivers to identify those needing IFF_TX_SKB_SHARING cleared net: add IFF_SKB_TX_SHARED flag to priv_flags net: sock_sendmsg_nosec() is static forcedeth: fix vlans gianfar: fix bug caused by 87c288c6e9aa31720b72e2bc2d665e24e1653c3e gro: Only reset frag0 when skb can be pulled ...
| * | tg3: Remove 5719 jumbo frames and TSO blocksMatt Carlson2011-07-281-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | The A0 revision of this chip is the only device that requires these features to be disabled. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | tg3: Break larger frags into 4k chunks for 5719Matt Carlson2011-07-282-6/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 5719 has bug where RDMAs larger than 4k can cause problems. This patch works around the problem by dividing larger DMA requests into something the hardware can handle. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | tg3: Add tx BD budgeting codeMatt Carlson2011-07-281-20/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As the driver breaks large skb fragments into smaller submissions to the hardware, there is a new danger that BDs might get exhausted before all fragments have been mapped. This patch adds code to make sure tx BDs aren't oversubscribed and flag the condition if it happens. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | tg3: Consolidate code that calls tg3_tx_set_bd()Matt Carlson2011-07-281-37/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch consolidates all code that populates tx BDs into a single routine. Setting tx BDs needs to be more carefully controlled to see if workarounds need to be applied. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | tg3: Add partial fragment unmapping codeMatt Carlson2011-07-282-0/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following patches are going to break skb fragments into smaller sizes. This patch attempts to make the change easier to digest by only addressing the skb teardown portion. The patch modifies the driver to skip over any BDs that have a flag set that indicates the BD isn't the beginning of an skb fragment. Such BDs were a result of segmentation and do not need a pci_unmap_page() call. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | tg3: Generalize tg3_skb_error_unmap()Matt Carlson2011-07-281-32/+16Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the following patches, unmapping skb fragments will get just as complicated as mapping them. This patch generalizes tg3_skb_error_unmap() and makes it the one-stop-shop for skb unmapping. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | tg3: Remove short DMA check for 1st fragmentMatt Carlson2011-07-281-3/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | The first fragment of an skb should always be greater than 8 bytes. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | tg3: Simplify tx bd assignmentsMatt Carlson2011-07-281-39/+37Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the following patches, the process the driver will use to assign skb fragments to transmit BDs will get more complicated. To prepare for that new code, this patch seeks to simplify how transmit BDs are populated. It does this by separating the code that assigns the BD members from the logic that controls how the fields are set. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | tg3: Reintroduce tg3_tx_ring_infoMatt Carlson2011-07-282-7/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following patches will require the use of an additional flag in the ring_info structure. The use of this flag is tx path specific, so this patch defines a specialized ring_info structure. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ASIX: Use only 11 bits of header for data sizeMarek Vasut2011-07-281-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The AX88772B uses only 11 bits of the header for the actual size. The other bits are used for something else. This causes dmesg full of messages: asix_rx_fixup() Bad Header Length This patch trims the check to only 11 bits. I believe on older chips, the remaining 5 top bits are unused. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ASIX: Simplify condition in rx_fixup()Marek Vasut2011-07-281-3/+2Star
| | | | | | | | | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | Fix cdc-phonet buildChris Clayton2011-07-281-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Try to send to correct address this time! ---------- Forwarded Message ---------- Subject: [PATCH] Fix cdc-phonet build Date: Saturday 23 Jul 2011 From: Chris Clayton <chris2553@googlemail.com> To: linux-net@vger.kernel.org cdc-phonet does not presently build on linux-3.0 because there is no entry for it in drivers/net/Makefile. This patch adds that entry. Signed-off-by: Chris Clayton <chris2553@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | bonding: reduce noise during initAndy Gospodarek2011-07-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On Tue, Jul 26, 2011 at 05:40:27PM -0700, Joe Perches wrote: > On Tue, 2011-07-26 at 17:37 -0700, Jay Vosburgh wrote: > > Joe Perches <joe@perches.com> wrote: > > >I'd prefer you don't separate the format string > > >into multiple pieces. > > Why not? To me, it looks easier to read split into sections > > that don't wrap lines. > > Harder to grep for a dmesg and the > defect rate of these split formats is > typically higher than single strings > because of bad spacing between string > segments. > I noticed that you took some time back in late 2009 to 'consolidate' the split format-strings present in the bonding driver at the time and I've decided I'm fine to leave them the way they are. The main point of my patch was to change the output and I would like to get that included. Here is my updated patch... Subject: [PATCH net-next-2.6 v2] bonding: reduce noise during init Many are using sysfs to configure bonding rather than module options, so there is no need for bonding to throw this warning in normal cases. Keep the message around when debugging is enabled as it might be useful for someone desperate enough to enable debugging, but eliminate it otherwise. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | bonding: fix string comparison errorsAndy Gospodarek2011-07-281-62/+71
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a bond contains a device where one name is the subset of another (eth1 and eth10, for example), one cannot properly set the primary device or the currently active device. This was reported and based on work by Takuma Umeya. I also verified the problem and tested that this fix resolves it. V2: A few did not like the the current code or my changes, so I refactored bonding_store_primary and bonding_store_active_slave to be a bit cleaner, dropped the use of strnicmp since we did not really need the comparison to be case insensitive, and formatted the input string from sysfs so a comparison to IFNAMSIZ could be used. I also discovered an error in bonding_store_active_slave that would modify bond->primary_slave rather than bond->curr_active_slave before forcing the bonding driver to choose a new active slave. V3: Actually sending the proper patch.... Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Reported-by: Takuma Umeya <tumeya@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: Audit drivers to identify those needing IFF_TX_SKB_SHARING clearedNeil Horman2011-07-288-6/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After the last patch, We are left in a state in which only drivers calling ether_setup have IFF_TX_SKB_SHARING set (we assume that drivers touching real hardware call ether_setup for their net_devices and don't hold any state in their skbs. There are a handful of drivers that violate this assumption of course, and need to be fixed up. This patch identifies those drivers, and marks them as not being able to support the safe transmission of skbs by clearning the IFF_TX_SKB_SHARING flag in priv_flags Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Karsten Keil <isdn@linux-pingi.de> CC: "David S. Miller" <davem@davemloft.net> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Patrick McHardy <kaber@trash.net> CC: Krzysztof Halasa <khc@pm.waw.pl> CC: "John W. Linville" <linville@tuxdriver.com> CC: Greg Kroah-Hartman <gregkh@suse.de> CC: Marcel Holtmann <marcel@holtmann.org> CC: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | forcedeth: fix vlansJiri Pirko2011-07-281-3/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For some reason, when rxaccel is disabled, NV_RX3_VLAN_TAG_PRESENT is still set and some pseudorandom vids appear. So check for NETIF_F_HW_VLAN_RX as well. Also set correctly hw_features and set vlan mode on probe. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | gianfar: fix bug caused by 87c288c6e9aa31720b72e2bc2d665e24e1653c3eSebastian Pöhn2011-07-281-5/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 87c288c6e9aa31720b72e2bc2d665e24e1653c3e "gianfar: do vlan cleanup" has two issues: # permutation of rx and tx flags # enabling vlan tag insertion by default (this leads to unusable connections on some configurations) If VLAN insertion is requested (via ethtool) it will be set at an other point ... Signed-off-by: Sebastian Poehn <sebastian.poehn@belden.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | Merge branch 'for-davem' of ↵David S. Miller2011-07-283-3/+6
| |\ \ | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
| | * | Merge branch 'master' of ↵John W. Linville2011-07-263-3/+6
| | |\| | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
| | | * b43: fix invalid memory access in b43_ssb_remove()Pavel Roskin2011-07-261-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | wldev is freed in b43_one_core_detach() and should not be accessed after that call. Keep wldev->dev in a local variable. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | | * b43: bcma: drop BROKENRafał Miłecki2011-07-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We've fixed the last issue with BCMA support which caused memory corruption on loading and unloading b43. Support for BCMA in b43 was tested with 14e4:4353, 14e4:4357, 14e4:4727 and 14e4:4331. First two cards (BCM43224 and BCM43225) are supported. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | | * b43: bus: fix memory corruption when setting driver's dataRafał Miłecki2011-07-261-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes bug described in: https://bugzilla.kernel.org/show_bug.cgi?id=39172 Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | | acenic: use netdev_alloc_skb_ip_alignstephen hemminger2011-07-262-24/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Take Eric's patch one step further. Use netdev_skb_ip_align to do setup the receive skb. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | atomic: use <linux/atomic.h>Arun Sharma2011-07-2718-18/+18
|/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-17 19:47:18 +0200