summaryrefslogtreecommitdiffstats
path: root/drivers/net
Commit message (Collapse)AuthorAgeFilesLines
* mlx4: fix XDP_TX is acting like XDP_PASS on TX ring fullJesper Dangaard Brouer2016-09-191-1/+1
| | | | | | | | | | | The XDP_TX action can fail transmitting the frame in case the TX ring is full or port is down. In case of TX failure it should drop the frame, and not as now call 'break' which is the same as XDP_PASS. Fixes: 9ecc2d86171a ("net/mlx4_en: add xdp forwarding and data write support") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Reviewed-by: Brenden Blanco <bblanco@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipvlan: Introduce l3s modeMahesh Bandewar2016-09-194-7/+181
| | | | | | | | | | | | | | | | | | | | | | In a typical IPvlan L3 setup where master is in default-ns and each slave is into different (slave) ns. In this setup egress packet processing for traffic originating from slave-ns will hit all NF_HOOKs in slave-ns as well as default-ns. However same is not true for ingress processing. All these NF_HOOKs are hit only in the slave-ns skipping them in the default-ns. IPvlan in L3 mode is restrictive and if admins want to deploy iptables rules in default-ns, this asymmetric data path makes it impossible to do so. This patch makes use of the l3_rcv() (added as part of l3mdev enhancements) to perform input route lookup on RX packets without changing the skb->dev and then uses nf_hook at NF_INET_LOCAL_IN to change the skb->dev just before handing over skb to L4. Signed-off-by: Mahesh Bandewar <maheshb@google.com> CC: David Ahern <dsa@cumulusnetworks.com> Reviewed-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlxsw: spectrum: Implement offload stats ndo and expose HW stats by defaultNogah Frankel2016-09-192-7/+127
| | | | | | | | | | | | Change the default statistics ndo to return HW statistics (like the one returned by ethtool_ops). The HW stats are collected to a cache by delayed work every 1 sec. Implement the offload stat ndo. Add a function to get SW statistics, to be called from this function. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge tag 'mac80211-next-for-davem-2016-09-16' of ↵David S. Miller2016-09-191-2/+1Star
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== This time we have various things - all across the board: * MU-MIMO sniffer support in mac80211 * a create_singlethread_workqueue() cleanup * interface dump filtering that was documented but not implemented * support for the new radiotap timestamp field * send delBA in two unexpected conditions (as required by the spec) * connect keys cleanups - allow only WEP with index 0-3 * per-station aggregation limit to work around broken APs * debugfs improvement for the integrated codel algorithm and various other small improvements and cleanups. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * mac80211_hwsim: statically initialize hwsim_radios listJohannes Berg2016-09-161-2/+1Star
| | | | | | | | | | | | | | There's no need to initialize at runtime, when the static declaration macro can just be used instead, so do that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | net: r6040: add in missing white space in error message textColin Ian King2016-09-191-4/+2Star
| | | | | | | | | | | | | | | | | | | | A couple of dev_err messages span two lines and the literal string is missing a white space between words. Add the white space and join the two lines into one. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: FLorian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | dwc_eth_qos: constify net_device_ops structuresJulia Lawall2016-09-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Check for net_device_ops structures that are only stored in the netdev_ops field of a net_device structure. This field is declared const, so net_device_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct net_device_ops i@p = { ... }; @ok@ identifier r.i; struct net_device e; position p; @@ e.netdev_ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct net_device_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct net_device_ops i = { ... }; // </smpl> The result of size on this file before the change is: text data bss dec hex filename 21623 1316 40 22979 59c3 drivers/net/ethernet/synopsys/dwc_eth_qos.o and after the change it is: text data bss dec hex filename 22199 724 40 22963 59b3 drivers/net/ethernet/synopsys/dwc_eth_qos.o Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
* | hisilicon: constify net_device_ops structuresJulia Lawall2016-09-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Check for net_device_ops structures that are only stored in the netdev_ops field of a net_device structure. This field is declared const, so net_device_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct net_device_ops i@p = { ... }; @ok@ identifier r.i; struct net_device e; position p; @@ e.netdev_ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct net_device_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct net_device_ops i = { ... }; // </smpl> The result of size on this file before the change is: text data bss dec hex filename 7995 848 8 8851 2293 drivers/net/ethernet/hisilicon/hip04_eth.o and after the change it is: text data bss dec hex filename 8571 256 8 8835 2283 drivers/net/ethernet/hisilicon/hip04_eth.o Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: vrf: Remove RT_FL_TOSDavid Ahern2016-09-171-3/+0Star
| | | | | | | | | | | | | | No longer used after d66f6c0a8f3c0 ("net: ipv4: Remove l3mdev_get_saddr") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge tag 'wireless-drivers-next-for-davem-2016-09-15' of ↵David S. Miller2016-09-17139-1213/+4260
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.9 Major changes: iwlwifi * preparation for new a000 HW continues * some DQA improvements * add support for GMAC * add support for 9460, 9270 and 9170 series mwifiex * support random MAC address for scanning * add HT aggregation support for adhoc mode * add custom regulatory domain support * add manufacturing mode support via nl80211 testmode interface bcma * support BCM53573 series of wireless SoCs bitfield.h * add FIELD_PREP() and FIELD_GET() macros mt7601u * convert to use the new bitfield.h macros brcmfmac * add support for bcm4339 chip with modalias sdio:c00v02D0d4339 ath10k * add nl80211 testmode support for 10.4 firmware * hide kernel addresses from logs using %pK format specifier * implement NAPI support * enable peer stats by default ath9k * use ieee80211_tx_status_noskb where possible wil6210 * extract firmware capabilities from the firmware file ath6kl * enable firmware crash dumps on the AR6004 ath-current is also merged to fix a conflict in ath10k. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * | mwifiex: firmware name correction for usb8997 chipsetGanapathi Bhat2016-09-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Similar to pcie8997 chipset, first firmware submitted for usb8997 chipset will be usbusb8997_combo_v4.bin. This patch corrects the name used in driver. Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
| * | mwifiex: Command 7 handling for USB chipsetsGanapathi Bhat2016-09-142-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Firmware image for newer USB chipsets starts with a command 7 block (special command). It doesn't contain data length field. This patch adds necessary handling. Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
| * | rtlwifi: rtl818x: constify local structuresJulia Lawall2016-09-148-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For structure types defined in the same file or local header files, find top-level static structure declarations that have the following properties: 1. Never reassigned. 2. Address never taken 3. Not passed to a top-level macro call 4. No pointer or array-typed field passed to a function or stored in a variable. Declare structures having all of these properties as const. Done using Coccinelle. Based on a suggestion by Joe Perches <joe@perches.com>. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
| * | iwlegacy: constify local structuresJulia Lawall2016-09-141-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For structure types defined in the same file or local header files, find top-level static structure declarations that have the following properties: 1. Never reassigned. 2. Address never taken 3. Not passed to a top-level macro call 4. No pointer or array-typed field passed to a function or stored in a variable. Declare structures having all of these properties as const. Done using Coccinelle. Based on a suggestion by Joe Perches <joe@perches.com>. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
| * | ath: constify local structuresJulia Lawall2016-09-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For structure types defined in the same file or local header files, find top-level static structure declarations that have the following properties: 1. Never reassigned. 2. Address never taken 3. Not passed to a top-level macro call 4. No pointer or array-typed field passed to a function or stored in a variable. Declare structures having all of these properties as const. Done using Coccinelle. Based on a suggestion by Joe Perches <joe@perches.com>. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
| * | rtl8xxxu: fix spelling mistake "firmare" -> "firmware"Colin Ian King2016-09-141-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | Trivial fix to spelling mistakes in dev_dbg message. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
| * | rtl8xxxu: Reset device on module unload if still attachedJes Sorensen2016-09-141-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | If the USB dongle is still attached, reset it on module unload to avoid scans failing when reloading the driver. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
| * | mwifiex: correction in Rx STBC field of htcapinfoAmitkumar Karwar2016-09-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Currently Rx STBC in assoc request frame is advertised as 3. It should be 2, as our chipsets support two spatial streams. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
| * | mwifiex: handle error if IRQ request fails in mwifiex_sdio_of()Amitkumar Karwar2016-09-141-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When this failure occurs, we will clear card->plt_wake_cfg so that device would initialize without wake up on external interrupt feature. This feature specific code in suspend and resume handlers will be skipped. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
| * | Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo2016-09-1447-549/+2125
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ath.git patches for 4.9. Major changes: ath10k * add nl80211 testmode support for 10.4 firmware * hide kernel addresses from logs using %pK format specifier * implement NAPI support * enable peer stats by default ath9k * use ieee80211_tx_status_noskb where possible wil6210 * extract firmware capabilities from the firmware file ath6kl * enable firmware crash dumps on the AR6004 ath-current is also merged to fix a conflict in ath10k.
| | * | ath10k: remove 4-addr padding related hw_param configurationVasanthakumar Thiagarajan2016-09-132-17/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | hw_4addr_pad was added to handle different types of padding in 4-address rx frame. But this padding is not very specific to 4-address, it can happen even with three address + ethernet decap mode. Since the padding information can be obtained through Rx desc for QCA99X0 and newer chips, this hw_param is not needed any more. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
| | * | ath10k: properly remove padding from the start of rx payloadVasanthakumar Thiagarajan2016-09-132-14/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In QCA99X0 (QCA99X0, QCA9984, QCA9888 and QCA4019) family chips, hw adds padding at the begining of the rx payload to make L3 header 4-byte aligned. In the chips doing this type of padding, the number of bytes padded will be indicated through msdu_end:info1. Define a hw_rx_desc_ops wrapper to retrieve the number of padded bytes and use this while doing undecap. This should fix padding related issues with ethernt decap format with QCA99X0, QCA9984, QCA9888 and QCA4019 hw. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> [Rename operations to hw_ops for other purposes] Signed-off-by: Benjamin Berg <benjamin@sipsolutions.net> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
| | * | ath10k: add provision for Rx descriptor abstractionVasanthakumar Thiagarajan2016-09-133-0/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are slight differences in Rx hw descriptor information among different chips. So far driver does not use those new information for any functionalities, but there is one important information which is available from QCA99X0 onwards to indicate the number of bytes that hw padded at the begining of the rx payload and this information is needed to undecap the rx packet. Add an abstraction for Rx desc to make use of the new desc information available. The callback that this patch defines to retrieve the padding bytes will be used in follow-up patch. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> [Rename operations to hw_ops for other purposes] Signed-off-by: Benjamin Berg <benjamin@sipsolutions.net> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
| | * | ath10k: move ath10k_hw_params definition to hw.hVasanthakumar Thiagarajan2016-09-132-52/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is to prepare for rx descriptor abstraction where we'll be dereferencing ath10k_hw_params member in hw.h. Moreover hw.h looks more suitable to house ath10k_hw_params definition than core.h Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
| | * | ath10k: improve logging messageBen Greear2016-09-131-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Helps to know the sta pointer. Signed-off-by: Ben Greear <greearb@candelatech.com> [kvalo@qca.qualcomm.com: add %pK and remove the colon] Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
| | * | ath10k: enable peer stats by defaultThomas Pedersen2016-09-131-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | IFTYPE_MESH_POINT need to rely on these for accurate path selection metrics. Other modes will probably also find them useful. Enabling peer stats has the side effect of reducing max number of STAs from 128 to 118. There should be negligible performance impact. If users really need 128 STAs and don't mind losing out on peer stats, they can still disable them: echo 0 > debugfs/ieee80211/phyn/ath10k/peer_stats Signed-off-by: Thomas Pedersen <twp@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
| | * | ath10k: remove unused variable ar_pciChaehyun Lim2016-09-131-2/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Trival fix to remove unused variable ar_pci in ath10k_pci_tx_pipe_cleanup when building with W=1: drivers/net/wireless/ath/ath10k/pci.c:1696:21: warning: variable 'ar_pci' set but not used [-Wunused-but-set-variable] Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
| | * | ath10k: fix memory leak on caldata on error exit pathColin Ian King2016-09-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | caldata is not being free'd on the error exit path, causing a memory leak and data definitely should not be freed. Free caldata instead of data. Thanks to Kalle Valo for spotting that data should not be free'd. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
| | * | Merge branch 'ath-current' into ath-nextKalle Valo2016-09-095-15/+21
| | |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 3c97f5de1f28 ("ath10k: implement NAPI support") conflicts with ath-current. To avoid any merge problems merge ath-current to ath-next already now. Conflicts: drivers/net/wireless/ath/ath10k/htt_rx.c
| | * | | carl9170: Fix wrong completion usageDaniel Wagner2016-09-091-4/+2Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | carl9170_usb_stop() is used from several places to flush and cleanup any pending work. The normal pattern is to send a request and wait for the irq handler to call complete(). The completion is not reinitialized during normal operation and as the old comment indicates it is important to keep calls to wait_for_completion_timeout() and complete() balanced. Calling complete_all() brings this equilibirum out of balance and needs to be fixed by a reinit_completion(). But that opens a small race window. It is possible that the sequence of complete_all(), reinit_completion() is faster than the wait_for_completion_timeout() can do its work. The wake up is not lost but the done counter test is after reinit_completion() has been executed. The only reason we don't see carl9170_exec_cmd() hang forever is we use the timeout version of wait_for_copletion(). Let's fix this by reinitializing the completion (that is just setting done counter to 0) just before we send out an request. Now, carl9170_usb_stop() can be sure a complete() call is enough to make progess since there is only one waiter at max. This is a common pattern also seen in various drivers which use completion. Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
| | * | | ath6kl: Allow the radio to report 0 dbm txpower without timing outEric Bentley2016-09-091-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ath6kl driver attempts to get the txpower value from the radio by first clearing the existing stored value and then watching the value to become non-zero. APs allow setting client power to values from -127..127, but this radio is not capable of setting values less then 0 and so will report txpower as 0dbm for both negative and 0 client power values. When the radio has txpower set to 0dbm txpower (equivalent to 1mw) the ath6kl_cfg80211_get_txpower() function will remain in the wait_event_interruptible_timeout() loop waiting for the value to be non-zero, and will eventually timeout. This results in a 5 second delay in response. However, the correct value of zero is eventually returned. The 6004 defaults to 63dbm which is then limited by regulatory and hardware limits with max of 18dbm (6003 max is 16dbm), therefore we can use values larger then these to be able to determine when the value has been updated. To correct the issue, set the value to a nonsensical value (255) and wait for it to change to the valid value. Tested on both 6003 and 6004 based radios. Return value of zero is correctly returned in an expected amount of time (similar to when returning non-zero values) when AP client power is set to both 0 and negative values. Signed-off-by: Eric Bentley <eric.bentley@lairdtech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
| | * | | ath6kl: enable firmware crash dumps on the AR6004Dan Kephart2016-09-091-7/+4Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The firmware crash dumps on the 6004 are the same as the 6003. Remove the statement guarding it from dumping on the 6004. Renamed the REG_DUMP_COUNT_AR6003 to reflect support on both chips. Signed-off-by: Dan Kephart <dan.kephart@lairdtech.com> Reviewed-by: Steve deRosier <steve.derosier@lairdtech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
| | * | | ath9k: remove repetitions of mask array sizeBob Copeland2016-09-091-6/+3Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The constant "123", which is the number of elements in mask_m / mask_p, is repeated several times in this function. Replace memsets with array initialization, and replace a loop conditional with ARRAY_SIZE() so that we don't repeat ourselves. Signed-off-by: Bob Copeland <me@bobcopeland.com> Reviewed-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
| | * | | ath10k: fix reporting channel survey dataAshok Raj Nagarajan2016-09-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When user requests for survey dump data, driver is providing wrong survey information. This information we sent is the survey data that we have collected during previous user request. This issue occurs because we request survey dump for wrong channel. With this change, we correctly display the correct and current survey information to userspace. Fixes: fa7937e3d5c2 ("ath10k: update bss channel survey information") Signed-off-by: Ashok Raj Nagarajan <arnagara@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
| | * | | ath10k: remove unnecessary error code assignmentMohammed Shafi Shajakhan2016-09-091-1/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The error assigned does not seems to be used anywhere, fixes nothing just a small cleanup Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
| | * | | ath9k: improve powersave filter handlingFelix Fietkau2016-09-091-3/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For non-aggregated frames, ath9k was leaving handling of powersave filtered packets to mac80211. This can be too slow if the intermediate queue is already filled with packets and mac80211 does not immediately send a new packet via drv_tx(). Improve response time with filtered frames by triggering clearing the powersave filter internally. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
| | * | | ath9k: use ieee80211_tx_status_noskb where possibleFelix Fietkau2016-09-091-32/+62
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It removes the need for undoing the padding changes to skb->data and it improves performance by eliminating one tx status lookup per MPDU in the status path. It is also useful for preparing a follow-up fix to better handle powersave filtering. A side effect is that these counters, available via debugfs, become now invalid: * dot11TransmittedFragmentCount * dot11FrameDuplicateCount, * dot11ReceivedFragmentCount * dot11MulticastReceivedFrameCount Signed-off-by: Felix Fietkau <nbd@nbd.name> [kvalo@qca.qualcomm.com: add a note about counters, thanks to Zefir Kurtisi] Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
| | * | | ath10k: fix throughput regression in multi client modeRajkumar Manoharan2016-09-092-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 7a0adc83f34d ("ath10k: improve tx scheduling") is causing severe throughput drop in multi client mode. This issue is originally reported in veriwave setup with 50 clients with TCP downlink traffic. While increasing number of clients, the average throughput drops gradually. With 50 clients, the combined peak throughput is decreased to 98 Mbps whereas reverting given commit restored it to 550 Mbps. Processing txqs for every tx completion is causing overhead. Ideally for management frame tx completion, pending txqs processing can be avoided. The change partly reverts the commit "ath10k: improve tx scheduling". Processing pending txqs after all skbs tx completion will yeild enough room to burst tx frames. Fixes: 7a0adc83f34d ("ath10k: improve tx scheduling") Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
| | * | | ath10k: implement NAPI supportRajkumar Manoharan2016-09-098-96/+159
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add NAPI support for rx and tx completion. NAPI poll is scheduled from interrupt handler. The design is as below - on interrupt - schedule napi and mask interrupts - on poll - process all pipes (no actual Tx/Rx) - process Rx within budget - if quota exceeds budget reschedule napi poll by returning budget - process Tx completions and update budget if necessary - process Tx fetch indications (pull-push) - push any other pending Tx (if possible) - before resched or napi completion replenish htt rx ring buffer - if work done < budget, complete napi poll and unmask interrupts This change also get rid of two tasklets (intr_tq and txrx_compl_task). Measured peak throughput with NAPI on IPQ4019 platform in controlled environment. No noticeable reduction in throughput is seen and also observed improvements in CPU usage. Approx. 15% CPU usage got reduced in UDP uplink case. DL: AP DUT Tx UL: AP DUT Rx IPQ4019 (avg. cpu usage %) ======== TOT +NAPI =========== ============= TCP DL 644 Mbps (42%) 645 Mbps (36%) TCP UL 673 Mbps (30%) 675 Mbps (26%) UDP DL 682 Mbps (49%) 680 Mbps (49%) UDP UL 720 Mbps (28%) 717 Mbps (11%) Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
| | * | | ath9k: mark ath_fill_led_pin() staticBaoyou Xie2016-09-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We get 1 warning about global functions without a declaration in the ath9k gpio driver when building with W=1: drivers/net/wireless/ath/ath9k/gpio.c:25:6: warning: no previous prototype for 'ath_fill_led_pin' [-Wmissing-prototypes] In fact, this function is only used in the file in which it is declared and don't need a declaration, but can be made static. so this patch marks it 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
| | * | | ath10k: fix spelling mistake "montior" -> "monitor"Colin Ian King2016-09-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Trivial fix to spelling mistake in ath10k_warn message. Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
| | * | | ath10k: Fix broken NULL func data frame status for 10.4Mohammed Shafi Shajakhan2016-09-023-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Older firmware with HTT delivers incorrect tx status for null func frames to driver, but this fixed in 10.2 and 10.4 firmware versions. Also this workaround results in reporting of incorrect null func status for 10.4. Fix this is by introducing a firmware feature flag for 10.4 so that this workaround is skipped and proper tx status for null func frames are reported Signed-off-by: Tamizh chelvam <c_traja@qti.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
| | * | | ath10k: replace config_enabled() with IS_REACHABLE()Masahiro Yamada2016-09-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 97f2645f358b ("tree-wide: replace config_enabled() with IS_ENABLED()") mostly did away with config_enabled(). This is one of the postponed TODO items as config_enabled() is used for a tristate option here. Theoretically, config_enabled() is equivalent to IS_BUILTIN(), but I guess IS_REACHABLE() is the best fit for this case because both CONFIG_HWMON and CONFIG_ATH10K are tristate. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
| | * | | ath10k: Added support for extended dbglog module id for 10.4Maharaja Kennadyrajan2016-09-026-11/+64
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For 10.4 fw versions, dbglog module id has been extended from u32 to u64, hence this patch fixes the same in the ath10k driver side. This patch doesn't break the older 10.4 releases. The FW change is already present in the older FWs. Signed-off-by: Maharaja Kennadyrajan <c_mkenna@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
| | * | | ath10k: use complete() instead complete_all()Daniel Wagner2016-09-022-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is only one waiter for the completion, therefore there is no need to use complete_all(). Let's make that clear by using complete() instead of complete_all(). The usage pattern of the completion is: waiter context waker context scan.started ------------ ath10k_start_scan() lockdep_assert_held(conf_mutex) auth10k_wmi_start_scan() wait_for_completion_timeout(scan.started) ath10k_wmi_event_scan_start_failed() complete(scan.started) ath10k_wmi_event_scan_started() complete(scan.started) scan.completed -------------- ath10k_scan_stop() lockdep_assert_held(conf_mutex) ath10k_wmi_stop_scan() wait_for_completion_timeout(scan.completed) __ath10k_scan_finish() complete(scan.completed) scan.on_channel --------------- ath10k_remain_on_channel() mutex_lock(conf_mutex) ath10k_start_scan() wait_for_completion_timeout(scan.on_channel) ath10k_wmi_event_scan_foreign_chan() complete(scan.on_channel) offchan_tx_completed -------------------- ath10k_offchan_tx_work() mutex_lock(conf_mutex) reinit_completion(offchan_tx_completed) wait_for_completion_timeout(offchan_tx_completed) ath10k_report_offchain_tx() complete(offchan_tx_completed) install_key_done ---------------- ath10k_install_key() lockep_assert_held(conf_mutex) reinit_completion(install_key_done) wait_for_completion_timeout(install_key_done) ath10k_htt_t2h_msg_handler() complete(install_key_done) vdev_setup_done --------------- ath10k_monitor_vdev_start() lockdep_assert_held(conf_mutex) reinit_completion(vdev_setup_done) ath10k_vdev_setup_sync() wait_for_completion_timeout(vdev_setup_done) ath10k_wmi_event_vdev_start_resp() complete(vdev_setup_done) ath10k_monitor_vdev_stop() lockdep_assert_held(conf_mutex) reinit_completion(vdev_setup_done() ath10k_vdev_setup_sync() wait_for_completion_timeout(vdev_setup_done) ath10k_wmi_event_vdev_stopped() complete(vdev_setup_done) thermal.wmi_sync ---------------- ath10k_thermal_show_temp() mutex_lock(conf_mutex) reinit_completion(thermal.wmi_sync) wait_for_completion_timeout(thermal.wmi_sync) ath10k_thermal_event_temperature() complete(thermal.wmi_sync) bss_survey_done --------------- ath10k_mac_update_bss_chan_survey lockdep_assert_held(conf_mutex) reinit_completion(bss_survey_done) wait_for_completion_timeout(bss_survey_done) ath10k_wmi_event_pdev_bss_chan_info() complete(bss_survey_done) All complete() calls happen while the conf_mutex is taken. That means at max one waiter is possible. Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
| | * | | ath10k: fix sending frame in management path in push txq logicAshok Raj Nagarajan2016-09-021-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the wake tx queue path, we are not checking if the frame to be sent takes management path or not. For eg. QOS null func frame coming here will take the management path. Since we are not incrementing the descriptor counter (num_pending_mgmt_tx) w.r.t tx management, on tx completion it is possible to see negative values. When the above counter reaches a negative value, we will not be sending a probe response out. if (is_presp && ar->hw_params.max_probe_resp_desc_thres < htt->num_pending_mgmt_tx) For IPQ4019, max_probe_resp_desc_thres (u32) is 24 is compared against num_pending_mgmt_tx (int) and the above condtions comes true if the counter is negative and we drop the probe response. To avoid this, check on the wake tx queue path as well for the tx path of the frame and increment the appropriate counters Fixes: cac085524cf1 "ath10k: move mgmt descriptor limit handle under mgmt_tx" Signed-off-by: Ashok Raj Nagarajan <arnagara@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
| | * | | ath10k: improve wake_tx_queue ops performanceRajkumar Manoharan2016-09-021-1/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | txqs_lock is interfering with wake_tx_queue submitting more frames. so queues don't get filled in and don't keep firmware/hardware busy enough. This change helps to reduce the txqs_lock contention and wake_tx_queue() blockage to being possible in txrx_unref(). To reduce turn around time of wake_tx_queue ops and to maintain fairness among all txqs, the callback is updated to push first txq alone from pending list for every wake_tx_queue call. Remaining txqs will be processed later upon tx completion. Below improvements are observed in push-only mode and validated on IPQ4019 platform. With this change, in AP mode ~10Mbps increase is observed in downlink (AP -> STA) traffic and approx. 5-10% of CPU usage is reduced. Major improvement is observed in 1-hop Mesh mode topology in 11ACVHT80. Compared to Infra mode, CPU overhead is higher in Mesh mode due to path lookup and no fast-xmit support. So reducing spin lock contention is helping in Mesh. TOT +change -------- -------- TCP DL 545 Mbps 595 Mbps TCP UL 555 Mbps 585 Mbps Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
| | * | | ath10k: suppress warnings when getting wmi WDS peer event idMohammed Shafi Shajakhan2016-09-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'WMI_10_4_WDS_PEER_EVENTID' is not yet handled/implemented for WDS mode, as of now suppress the warning message "Unknown eventid: 36903" Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
| | * | | ath10k: fix group privacy action frame decryption for qca4019Rajkumar Manoharan2016-09-023-5/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Recent commit 46f6b06050b7 ("mac80211: Encrypt "Group addressed privacy" action frames") encrypts group privacy action frames. But qca99x0 family chipset delivers broadcast/multicast management frames as encrypted and it should be decrypted by mac80211. Setting RX_FLAG_DECRYPTED stats for those frames is breaking mesh connection establishment. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
| | * | | ath10k: hide kernel addresses from logs using %pK format specifierMaharaja Kennadyrajan2016-09-0211-27/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the %pK format specifier we hide the kernel addresses with the help of kptr_restrict sysctl. In this patch, %p is changed to %pK in the driver code. The sysctl is documented in Documentation/sysctl/kernel.txt. Signed-off-by: Maharaja Kennadyrajan <c_mkenna@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-06 16:32:27 +0200