summaryrefslogtreecommitdiffstats
path: root/drivers/pci/hotplug/acpiphp_glue.c
Commit message (Collapse)AuthorAgeFilesLines
* Merge branch 'pci/jiang-acpiphp' into nextBjorn Helgaas2012-09-251-10/+31
|\
| * PCI: acpiphp: Handle PCIe ports without native hotplug capabilityJiang Liu2012-09-241-10/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 0d52f54e2ef64c189dedc332e680b2eb4a34590a (PCI / ACPI: Make acpiphp ignore root bridges using PCIe native hotplug) added code that made the acpiphp driver completely ignore PCIe root complexes for which the kernel had been granted control of the native PCIe hotplug feature by the BIOS through _OSC. Later commit 619a5182d1f38a3d629ee48e04fa182ef9170052 "PCI hotplug: Always allow acpiphp to handle non-PCIe bridges" relaxed the constraints to allow acpiphp driver handle non-PCIe bridges under such a complex. The constraint needs to be relaxed further to allow acpiphp driver to handle PCIe ports without native PCIe hotplug capability. Some MR-IOV switch chipsets, such PLX8696, support multiple virtual PCIe switches and may migrate downstream ports among virtual switches. To migrate a downstream port from the source virtual switch to the target, the port needs to be hot-removed from the source and hot-added into the target. The pciehp driver can't be used here because there are no slots within the virtual PCIe switch. So acpiphp driver is used to support downstream port migration. A typical configuration is as below: [Root without native PCIe HP] [Upstream port of vswitch without native PCIe HP] [Downstream port of vswitch with native PCIe HP] [PCIe endpoint] Here acpiphp driver will be used to handle root ports and upstream port in the virtual switch, and pciehp driver will be used to handle downstream ports in the virtual switch. Signed-off-by: Jiang Liu <liuj97@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
* | PCI/ACPI: Pass acpi_pci_root to acpi_pci_drivers' add/remove interfaceTaku Izumi2012-09-241-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch changes .add/.remove interfaces of acpi_pci_driver. In the current implementation acpi_handle is passed as a parameter of .add/.remove interface. However, the acpi_pci_root structure contains more useful information than just the acpi_handle. This enables us to avoid some useless lookups in each acpi_pci_driver. Note: This changes interfaces used by acpi_pci_register_driver(), an exported symbol. This patch updates all the in-kernel users, but any out-of-kernel acpi_pci_register_driver() users will need updates. [bhelgaas: changelog] Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* | PCI: Remove unused, commented-out, codeBjorn Helgaas2012-08-221-28/+0Star
| | | | | | | | | | | | | | This removes unused code that was already commented out. Tested-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org>
* | PCI: acpiphp: Use common pci_stop_and_remove_bus_device()Bjorn Helgaas2012-08-221-2/+1Star
| | | | | | | | | | | | | | | | Use pci_stop_and_remove_bus_device() like most other hotplug drivers rather than stopping and removing separately. Tested-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org>
* | PCI: acpiphp: Stop disabling bridges on removeBjorn Helgaas2012-08-171-15/+0Star
|/ | | | | | | | | acpiphp_disable_slot() turns off power to the slot immediately after calling disable_device(), so there's no point in disabling any bridges below the slot: we're about to turn them off anyway. Tested-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org>
* Merge branch 'pci/yinghai-hotplug-cleanup' into nextBjorn Helgaas2012-07-111-3/+0Star
|\ | | | | | | | | | | * pci/yinghai-hotplug-cleanup: PCI: acpiphp: merge acpiphp_debug and debug PCI: acpiphp: remove unused res_lock
| * PCI: acpiphp: remove unused res_lockYinghai Lu2012-07-101-3/+0Star
| | | | | | | | | | | | res_lock is never used, so remove it. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* | Merge branch 'topic/bjorn-trivial' into nextBjorn Helgaas2012-06-221-4/+9
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * topic/bjorn-trivial: PCI: remove useless pcix_set_mmrbc() dev->bus check PCI: acpiphp: check whether _ADR evaluation succeeded PCI: shpchp: remove dead code PCI: fix P2P bridge I/O port window sign extension PCI: fix upstream P2P bridge checks when enabling OBFF and LTR PCI: use __weak consistently PCI: cleanup assign_requested_resources_sorted() kernel-doc warning sparc/PCI: remove unused pcibios_assign_resource() definition
| * | PCI: acpiphp: check whether _ADR evaluation succeededBjorn Helgaas2012-06-211-4/+9
| |/ | | | | | | | | | | | | | | | | | | | | | | Check whether we evaluated _ADR successfully. Previously we ignored failure, so we would have used garbage data from the stack as the device and function number. We return AE_OK so that we ignore only this slot and continue looking for other slots. Found by Coverity (CID 113981). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* | PCI: acpiphp: remove all functions in slot, even without ACPI _EJxAmos Kong2012-06-141-10/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When we add a device with acpiphp, we enumerate all functions in the slot with pci_scan_slot(), regardless of whether they have associated ACPI methods such as _EJ0. When removing the device, we previously removed only the functions with those ACPI methods. This patch makes the remove symmetric with the add: we remove all functions in the slot, whether they have associated ACPI methods or not. With qemu-kvm and SeaBIOS, we can build a multi-function device where only function 0 has _EJ0 and _ADR (see bugzilla below). Removing and re-adding that slot (including all functions of the device) works correctly with Windows guests. This patch makes it also work in Linux guests. [bhelgaas: restructure loop iteration, pull out of slot->funcs loop] Reference: https://bugzilla.kernel.org/show_bug.cgi?id=43219 Signed-off-by: Amos Kong <kongjianjun@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* | PCI: acpiphp: fix function 0 leak when disabling a slotAmos Kong2012-06-141-0/+1
| | | | | | | | | | | | | | | | | | Previously, we acquired two references to function 0, but only released one. [bhelgaas: split this out from "remove all functions" fix] Signed-off-by: Amos Kong <kongjianjun@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* | PCI: replace struct pci_bus secondary/subordinate with busn_resYinghai Lu2012-06-131-4/+4
|/ | | | | | | | | Replace the struct pci_bus secondary/subordinate members with the struct resource busn_res. Later we'll build a resource tree of these bus numbers. [bhelgaas: changelog] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* PCI: make acpihp use __pci_remove_bus_device insteadYinghai Lu2012-02-271-1/+1
| | | | | | | pci_stop_bus_device gets called before in the same loop. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: Rename pci_remove_bus_device to pci_stop_and_remove_bus_deviceYinghai Lu2012-02-271-2/+2
| | | | | | | | | | | | | The old pci_remove_bus_device actually did stop and remove. Make the name reflect that to reduce confusion. This patch is done by sed scripts and changes back some incorrect __pci_remove_bus_device changes. Suggested-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: Can continually add funcs after adding func0Amos Kong2012-02-141-16/+13Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Boot up a KVM guest, and hotplug multifunction devices(func1,func2,func0,func3) to guest. for i in 1 2 0 3;do qemu-img create /tmp/resize$i.qcow2 1G -f qcow2 (qemu) drive_add 0x11.$i id=drv11$i,if=none,file=/tmp/resize$i.qcow2 (qemu) device_add virtio-blk-pci,id=dev11$i,drive=drv11$i,addr=0x11.$i,multifunction=on done In linux kernel, when func0 of the slot is hot-added, the whole slot will be marked as 'enabled', then driver will ignore other new hotadded funcs. But in Win7 & WinXP, we can continaully add other funcs after adding func0, all funcs will be added in guest. drivers/pci/hotplug/acpiphp_glue.c: static int acpiphp_check_bridge(struct acpiphp_bridge *bridge) { .... for (slot = bridge->slots; slot; slot = slot->next) { if (slot->flags & SLOT_ENABLED) { acpiphp_disable_slot() else acpiphp_enable_slot() .... | } v enable_device() | v //only don't enable slot if func0 is not added list_for_each_entry(func, &slot->funcs, sibling) { ... } slot->flags |= SLOT_ENABLED; //mark slot to 'enabled' This patch just make pci driver can continaully add funcs after adding func 0. Only mark slot to 'enabled' when all funcs are added. For pci multifunction hotplug, we can add functions one by one(func 0 is necessary), and all functions will be removed in one time. Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: Set device power state to PCI_D0 for device without native PM supportAjaykumar Hotchandani2011-12-141-1/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During test of one IB card with guest VM, found that, msi is not initialized properly. It turns out __write_msi_msg will do nothing if device current_state is not PCI_D0. And, that pci device does not have pm_cap in guest VM. There is an error in setting of power state to PCI_D0 in pci_enable_device(), but error is not returned for this. Following is code flow: pci_enable_device() --> __pci_enable_device_flags() --> do_pci_enable_device() --> pci_set_power_state() --> __pci_start_power_transition() We have following condition inside __pci_start_power_transition(): if (platform_pci_power_manageable(dev)) { error = platform_pci_set_power_state(dev, state); if (!error) pci_update_current_state(dev, state); } else { error = -ENODEV; /* Fall back to PCI_D0 if native PM is not supported */ if (!dev->pm_cap) dev->current_state = PCI_D0; } Here, from platform_pci_set_power_state(), acpi_pci_set_power_state() is getting called and that is failing with ENODEV because of following condition: if (!handle || ACPI_SUCCESS(acpi_get_handle(handle, "_EJ0",&tmp))) return -ENODEV; Because of that, pci_update_current_state() is not getting called. With this patch, if device power state can not be set via platform_pci_set_power_state and that device does not have native pm support, then PCI device power state will be set to PCI_D0. -v2: This also reverts 47e9037ac16637cd7f12b8790ea7ce6680e42168, as it's not needed after this change. Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Ajaykumar Hotchandani<ajaykumar.hotchandani@oracle.com> Signed-off-by: Yinghai Lu<yinghai.lu@oracle.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI hotplug: Always allow acpiphp to handle non-PCIe bridgesRafael J. Wysocki2011-12-131-17/+12Star
| | | | | | | | | | | | | | | | | | | | | | | Commit 0d52f54e2ef64c189dedc332e680b2eb4a34590a (PCI / ACPI: Make acpiphp ignore root bridges using PCIe native hotplug) added code that made the acpiphp driver completely ignore PCIe root complexes for which the kernel had been granted control of the native PCIe hotplug feature by the BIOS through _OSC. Unfortunately, however, this was a mistake, because on some systems there were PCI bridges supporting PCI (non-PCIe) hotplug under such root complexes and those bridges should have been handled by acpiphp. For this reason, revert the changes made by the commit mentioned above and make register_slot() in drivers/pci/hotplug/acpiphp_glue.c avoid registering hotplug slots for PCIe ports that belong to root complexes with native PCIe hotplug enabled (which means that the BIOS has granted the kernel control of this feature for the given root complex). This is reported to address the original issue fixed by commit 0d52f54e2ef64c189dedc332e680b2eb4a34590a and to work on the system where that commit broke things. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI / ACPI: Make acpiphp ignore root bridges using PCIe native hotplugRafael J. Wysocki2011-10-311-5/+24
| | | | | | | | | | | | | | | | | | | If the kernel has requested control of the PCIe native hotplug feature for a given root complex, the acpiphp driver should not try to handle that root complex and it should leave it to pciehp. Failing to do so causes problems to happen if acpiphp is loaded before pciehp on such systems. To address this issue make find_root_bridges() ignore PCIe root complexes with PCIe native hotplug enabled and make add_bridge() return error code if PCIe native hotplug is enabled for the given root port. This causes acpiphp to refuse to load if PCIe native hotplug is enabled for all complexes and to refuse binding to the root complexes with PCIe native hotplug is enabled. Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI hotplug: acpiphp: Prevent deadlock on PCI-to-PCI bridge removePrarit Bhargava2011-10-141-15/+94
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I originally submitted a patch to workaround this by pushing all Ejection Requests and Device Checks onto the kacpi_hotplug queue. http://marc.info/?l=linux-acpi&m=131678270930105&w=2 The patch is still insufficient in that Bus Checks also need to be added. Rather than add all events, including non-PCI-hotplug events, to the hotplug queue, mjg suggested that a better approach would be to modify the acpiphp driver so only acpiphp events would be added to the kacpi_hotplug queue. It's a longer patch, but at least we maintain the benefit of having separate queues in ACPI. This, of course, is still only a workaround the problem. As Bjorn and mjg pointed out, we have to refactor a lot of this code to do the right thing but at this point it is a better to have this code working. The acpi core places all events on the kacpi_notify queue. When the acpiphp driver is loaded and a PCI card with a PCI-to-PCI bridge is removed the following call sequence occurs: cleanup_p2p_bridge() -> cleanup_bridge() -> acpi_remove_notify_handler() -> acpi_os_wait_events_complete() -> flush_workqueue(kacpi_notify_wq) which is the queue we are currently executing on and the process will hang. Move all hotplug acpiphp events onto the kacpi_hotplug workqueue. In handle_hotplug_event_bridge() and handle_hotplug_event_func() we can simply push the rest of the work onto the kacpi_hotplug queue and then avoid the deadlock. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Cc: mjg@redhat.com Cc: bhelgaas@google.com Cc: linux-acpi@vger.kernel.org Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* ACPI: constify ops structsVasiliy Kulikov2011-07-171-1/+1
| | | | | | | | | | | | Structs battery_file, acpi_dock_ops, file_operations, thermal_cooling_device_ops, thermal_zone_device_ops, kernel_param_ops are not changed in runtime. It is safe to make them const. register_hotplug_dock_device() was altered to take const "ops" argument to respect acpi_dock_ops' const notion. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
* PCI hotplug: acpiphp: assume device is in state D0 after powering on a slot.Ian Campbell2011-05-111-0/+7
| | | | | | | | Devices which do not support PCI configuration space based power management may not otherwise be enabled. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* Fix common misspellingsLucas De Marchi2011-03-311-1/+1
| | | | | | Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
* PCI hotplug: acpiphp: set current_state to D0 in register_slotStefano Stabellini2011-03-041-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a device doesn't support power management (pm_cap == 0) but it is acpi_pci_power_manageable() because there is a _PS0 method declared for it and _EJ0 is also declared for the slot then nobody is going to set current_state = PCI_D0 for this device. This is what I think it is happening: pci_enable_device | __pci_enable_device_flags /* here we do not set current_state because !pm_cap */ | do_pci_enable_device | pci_set_power_state | __pci_start_power_transition | pci_platform_power_transition /* platform_pci_power_manageable() calls acpi_pci_power_manageable that * returns true */ | platform_pci_set_power_state /* acpi_pci_set_power_state gets called and does nothing because the * acpi device has _EJ0, see the comment "If the ACPI device has _EJ0, * ignore the device" */ at this point if we refer to the commit message that introduced the comment above (10b3dcae0f275e2546e55303d64ddbb58cec7599), it is up to the hotplug driver to set the state to D0. However AFAICT the pci hotplug driver never does, in fact drivers/pci/hotplug/acpiphp_glue.c:register_slot sets the slot flags to (SLOT_ENABLED | SLOT_POWEREDON) but it does not set the pci device current state to PCI_D0. So my proposed fix is also to set current_state = PCI_D0 in register_slot. Comments are very welcome. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* acpiphp: Execute ACPI _REG method for hotadded devicesShaohua Li2010-03-141-0/+19
| | | | | | | | | | | Per ACPI spec, _ERG method should be executed before device driver gets control for hotpluged device. Firmware might do some configuration there. See http://bugzilla.kernel.org/show_bug.cgi?id=10805. In this machine, _REG method of docked device will configure cardbus bridge. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Tested-by: Paul Martin <pm@debian.org> Signed-off-by: Len Brown <len.brown@intel.com>
* ACPI: acpi_bus_{scan,bus,add}: return -ENODEV if no device was foundThomas Renninger2010-02-011-6/+0Star
| | | | | | | | | | | | | | | | Callers (acpi_memhotplug.c, dock.c and others) check for the return value of acpi_bus_add() and assume a valid device was returned in case zero was returned. Thus return -ENODEV if no device was found in acpi_bus_scan and propagate this through acpi_bus_add and acpi_bus_start. Also remove a confusing comment in acpiphp_glue.c, acpi_bus_scan will and cannot invoke if acpi_bus_add returns no valid device. Signed-off-by: Thomas Renninger <trenn@suse.de> Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
* Merge branch 'linux-next' of ↵Linus Torvalds2009-12-111-231/+17Star
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (109 commits) PCI: fix coding style issue in pci_save_state() PCI: add pci_request_acs PCI: fix BUG_ON triggered by logical PCIe root port removal PCI: remove ifdefed pci_cleanup_aer_correct_error_status PCI: unconditionally clear AER uncorr status register during cleanup x86/PCI: claim SR-IOV BARs in pcibios_allocate_resource PCI: portdrv: remove redundant definitions PCI: portdrv: remove unnecessary struct pcie_port_data PCI: portdrv: minor cleanup for pcie_port_device_register PCI: portdrv: add missing irq cleanup PCI: portdrv: enable device before irq initialization PCI: portdrv: cleanup service irqs initialization PCI: portdrv: check capabilities first PCI: portdrv: move PME capability check PCI: portdrv: remove redundant pcie type calculation PCI: portdrv: cleanup pcie_device registration PCI: portdrv: remove redundant pcie_port_device_probe PCI: Always set prefetchable base/limit upper32 registers PCI: read-modify-write the pcie device control register when initiating pcie flr PCI: show dma_mask bits in /sys ... Fixed up conflicts in: arch/x86/kernel/amd_iommu_init.c drivers/pci/dmar.c drivers/pci/hotplug/acpiphp_glue.c
| * PCI Hotplug: acpiphp: clean up list traversalsAlex Chiang2009-11-041-41/+17Star
| | | | | | | | | | | | | | | | Using list_for_each_entry instead of list_for_each allows us to enhance readability and minorly reduce some stack usage. Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI hotplug: move IOAPIC support from acpiphp to ioapic driverBjorn Helgaas2009-11-041-190/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch moves PCI I/O APIC support from acpiphp to a separate driver. Like pciehp and shpchp, acpiphp handles PCI hotplug, i.e., addition and removal of PCI adapters. But in addition, acpiphp handles some ACPI hotplug, such as the addition of new host bridges, and the I/O APIC support was tangled up with that. I don't think the I/O APIC support needs to be in acpiphp; PCI I/O APICs usually appear as a function on a PCI host bridge, and we'll enumerate the APIC before any of the devices behind the bridge that use it. As far as I know, nobody actually uses I/O APIC hotplug. It depends on acpi_register_ioapic(), which is only implemented for ia64, and I don't think any vendors have supported I/O chassis hotplug yet. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> CC: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> CC: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | ACPICA: Add post-order callback to acpi_walk_namespaceLin Ming2009-11-251-11/+11
|/ | | | | | | | | | | | | | The existing interface only has a pre-order callback. This change adds an additional parameter for a post-order callback which will be more useful for bus scans. ACPICA BZ 779. Also update the external calls to acpi_walk_namespace. http://www.acpica.org/bugzilla/show_bug.cgi?id=779 Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
* PCI hotplug: acpiphp: use generic pci_configure_slot()Bjorn Helgaas2009-09-151-79/+2Star
| | | | | | | | | | | | | | Use the generic pci_configure_slot() rather than the acpiphp-specific decode_hpp() and program_hpp(). Unlike the previous acpiphp-specific code, pci_configure_slot() programs PCIe settings when an _HPX method provides them, so acpiphp-managed PCIe devices can now be configured. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI hotplug: clean up acpi_get_hp_params_from_firmware() interfaceBjorn Helgaas2009-09-151-4/+3Star
| | | | | | | | | | | This patch makes acpi_get_hp_params_from_firmware() take a pci_dev rather than a pci_bus and makes it return a standard int errno rather than acpi_status. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI hotplug: acpiphp: don't cache hotplug_params in acpiphp_bridgeBjorn Helgaas2009-09-151-31/+27Star
| | | | | | | | | | | | | We always look up hotplug_params with decode_hpp() immediately before using them, so we don't need to save them in the acpiphp_bridge struct. This patch follows the example of program_fw_provided_values() in pciehp_pci.c and shpchp_pci.c by just keeping the params on the stack while we need them. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Reviewed-by: Alex Chiang <achiang@hp.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI hotplug: acpiphp: remove superfluous _HPP/_HPX evaluationBjorn Helgaas2009-09-151-3/+0Star
| | | | | | | | | | | | | | decode_hpp() looks up hotplug PCI parameters from ACPI and saves them in the acpiphp_bridge structure. These parameters (in bridge->hpp) are only used by the acpiphp_set_hpp_values() -> program_hpp() path. In that path, we always call decode_hpp() before program_hpp(), so there's no need to do it in init_bridge_misc(). Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Reviewed-by: Alex Chiang <achiang@hp.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI Hotplug: convert acpi_pci_detect_ejectable() to take an acpi_handleAlex Chiang2009-09-141-22/+11Star
| | | | | | | | | | | | | acpi_pci_detect_ejectable() goes through effort to convert its struct pci_bus arg to an acpi_handle, but every time we use this interface, we already have the handle available. So let's just use the handle instead of converting back and forth. Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Tested-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI Hotplug: acpiphp: find bridges the easy wayAlex Chiang2009-09-141-60/+21Star
| | | | | | | | | | | | | | | | | Instead of constantly evaluating _ADR and _SEG over and over again, let's simplify our lives by using: acpi_pci_find_root() for root bridges acpi_get_pci_dev() for p2p bridges This change eliminates some copy 'n paste code and also allows us to simplify some internal interfaces. Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Tested-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI Hotplug: acpiphp: get pci_bus from acpi handle correctlyAlex Chiang2009-09-091-11/+17
| | | | | | | | | | | | | | | | We cannot simply call acpi_get_pci_dev() on any random ACPI handle and hope that it works, because a PCI root bridge may not have an associated struct pci_dev. This is allowed per the PCI specification, and is referred to as a non-materialized bridge. So, depending on the type of PCI bridge that the handle points to, use the appropriate interface to return the struct pci_bus correctly. Reviewed-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI Hotplug: acpiphp: convert to acpi_get_pci_devAlexander Chiang2009-06-181-18/+7Star
| | | | | | | | | | Now that acpi_get_pci_dev is available, let's use it instead of acpi_get_pci_id. Signed-off-by: Alex Chiang <achiang@hp.com> Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Len Brown <len.brown@intel.com>
* ACPI: Introduce acpi_is_root_bridge()Alexander Chiang2009-06-181-1/+1
| | | | | | | | | | | | Returns whether an ACPI CA node is a PCI root bridge or not. This API is generically useful, and shouldn't just be a hotplug function. The implementation becomes much simpler as well. Signed-off-by: Alex Chiang <achiang@hp.com> Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
* PCI Hotplug: acpiphp: don't store a pci_dev in acpiphp_funcAlex Chiang2009-05-271-37/+26Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | An oops can occur if a user attempts to use both PCI logical hotplug and the ACPI physical hotplug driver (acpiphp) in this sequence, where $slot/address == $device. In other words, if acpiphp has claimed a PCI device, and that device is logically removed, then acpiphp may oops when it attempts to access it again. # echo 1 > /sys/bus/pci/devices/$device/remove # echo 0 > /sys/bus/pci/slots/$slot/power Unable to handle kernel NULL pointer dereference (address 0000000000000000) Call Trace: [<a000000100016390>] show_stack+0x50/0xa0 [<a000000100016c60>] show_regs+0x820/0x860 [<a00000010003b390>] die+0x190/0x2a0 [<a000000100066a40>] ia64_do_page_fault+0x8e0/0xa40 [<a00000010000c7a0>] ia64_native_leave_kernel+0x0/0x270 [<a0000001003b2660>] pci_remove_bus_device+0x120/0x260 [<a0000002060549f0>] acpiphp_disable_slot+0x410/0x540 [acpiphp] [<a0000002060505c0>] disable_slot+0xc0/0x120 [acpiphp] [<a0000002040d21c0>] power_write_file+0x1e0/0x2a0 [pci_hotplug] [<a0000001003bb820>] pci_slot_attr_store+0x60/0xa0 [<a000000100240f70>] sysfs_write_file+0x230/0x2c0 [<a000000100195750>] vfs_write+0x190/0x2e0 [<a0000001001961a0>] sys_write+0x80/0x100 [<a00000010000c600>] ia64_ret_from_syscall+0x0/0x20 [<a000000000010720>] __kernel_syscall_via_break+0x0/0x20 The root cause of this oops is that the logical remove ("echo 1 > /sys/bus/pci/devices/$device/remove") destroyed the pci_dev. The pci_dev struct itself wasn't deallocated because acpiphp kept a reference, but some of its fields became invalid. acpiphp doesn't have any real reason to keep a pointer to a pci_dev around. It can always derive it using pci_get_slot(). If a logical remove destroys the pci_dev, acpiphp won't find it and is thus prevented from causing mischief. Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Tested-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Reported-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI Hotplug: acpiphp: grab refcount on p2p subordinate busAlex Chiang2009-04-061-0/+14
| | | | | | | | | | | | | | | | | If a logical hot unplug (remove) is performed on a bridge claimed by acpiphp and then acpiphp is unloaded, we will encounter an oops. This is because acpiphp will access the bridge's subordinate bus, which was released by the user's prior hot unplug. The solution is to grab a reference on the subordinate PCI bus. This will prevent the bus from release until acpiphp is unloaded. Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Tested-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Reported-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* ACPI PCI hotplug: harden against panic regressionJames Bottomley2009-01-161-0/+2
| | | | | | | | | | | | | | | | ACPI hotplug panic with current git head http://lkml.org/lkml/2009/1/10/136 Rather than reverting the entire commit that causes the crash: e8c331e963c58b83db24b7d0e39e8c07f687dbc6 "PCI hotplug: introduce functions for ACPI slot detection" simply harden against it while the changes to the hotplug code on this particularl machine are understood. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Len Brown <len.brown@intel.com>
* PCI hotplug: introduce functions for ACPI slot detectionKenji Kaneshige2009-01-071-92/+15Star
| | | | | | | | | | | | | | | | | | | | | | | | | | Some ACPI related PCI hotplug code can be shared among PCI hotplug drivers. This patch introduces the following functions in drivers/pci/hotplug/acpi_pcihp.c to share the code, and changes acpiphp and pciehp to use them. - int acpi_pci_detect_ejectable(struct pci_bus *pbus) This checks if the specified PCI bus has ejectable slots. - int acpi_pci_check_ejectable(struct pci_bus *pbus, acpi_handle handle) This checks if the specified handle is ejectable ACPI PCI slot. The 'pbus' parameter is needed to check if 'handle' is PCI related ACPI object. This patch also introduces the following inline function in include/linux/pci-acpi.h, which is useful to get ACPI handle of the PCI bridge from struct pci_bus of the bridge's secondary bus. - static inline acpi_handle acpi_pci_get_bridge_handle(struct pci_bus *pbus) This returns ACPI handle of the PCI bridge which generates PCI bus specified by 'pbus'. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI hotplug: acpiphp whitespace cleanupAlex Chiang2009-01-071-3/+3
| | | | | | | | | | Clean up whitespace. Setting 'let c_space_errors=1' in .vimrc shows all sorts of ugliness. ;) Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI/ACPI: acpiphp: Identify more removable slotsMatthew Garrett2009-01-071-15/+17
| | | | | | | | | | | | | According to section 6.3.6 of the ACPI spec, the presence of an _RMV method that evaluates to 1 is sufficient to indicate that a slot is removable without needing an eject method. This patch refactors the ejectable slot detection code a little in order to flag these slots as ejectable and register them. Acpihp then binds to the expresscard slot on my HP test machine. Acked-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI hotplug: acpiphp wants a 64-bit _SUNJustin Chen2008-12-161-2/+2
| | | | | | | | | | | Certain HP machines require the full 64 bits of _SUN as allowed by the ACPI spec. Without this change, we get name collisions in the lower 32 bits of the _SUN returned by firmware. Acked-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Justin Chen <justin.chen@hp.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* Merge branch 'ull' into testLen Brown2008-10-231-7/+7
|\ | | | | | | | | | | | | | | | | Conflicts: drivers/acpi/bay.c drivers/acpi/dock.c drivers/ata/libata-acpi.c Signed-off-by: Len Brown <len.brown@intel.com>
| * ACPI: Change acpi_evaluate_integer to support 64-bit on 32-bit kernelsMatthew Wilcox2008-10-111-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | As of version 2.0, ACPI can return 64-bit integers. The current acpi_evaluate_integer only supports 64-bit integers on 64-bit platforms. Change the argument to take a pointer to an acpi_integer so we support 64-bit integers on all platforms. lenb: replaced use of "acpi_integer" with "unsigned long long" lenb: fixed bug in acpi_thermal_trips_update() Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
* | dock: introduce .uevent for devices in dock, eg libataShaohua Li2008-09-241-2/+4
|/ | | | | | | | | | | dock's uevent reported itself, not ata. It might be difficult to find an ata device just according to a dock. This patch introduces docking ops for each device in a dock. when docking, dock driver can send device specific uevent. This should help dock station too (not just bay) Signed-off-by: Shaohua Li <shaohua.li@intel.com> Acked-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-11-06 14:19:17 +0100