summaryrefslogtreecommitdiffstats
path: root/drivers/pci
Commit message (Collapse)AuthorAgeFilesLines
* Merge branch 'linux-next' of ↵Linus Torvalds2010-08-0621-61/+391
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (30 commits) PCI: update for owner removal from struct device_attribute PCI: Fix warnings when CONFIG_DMI unset PCI: Do not run NVidia quirks related to MSI with MSI disabled x86/PCI: use for_each_pci_dev() PCI: use for_each_pci_dev() PCI: MSI: Restore read_msi_msg_desc(); add get_cached_msi_msg_desc() PCI: export SMBIOS provided firmware instance and label to sysfs PCI: Allow read/write access to sysfs I/O port resources x86/PCI: use host bridge _CRS info on ASRock ALiveSATA2-GLAN PCI: remove unused HAVE_ARCH_PCI_SET_DMA_MAX_SEGMENT_{SIZE|BOUNDARY} PCI: disable mmio during bar sizing PCI: MSI: Remove unsafe and unnecessary hardware access PCI: Default PCIe ASPM control to on and require !EMBEDDED to disable PCI: kernel oops on access to pci proc file while hot-removal PCI: pci-sysfs: remove casts from void* ACPI: Disable ASPM if the platform won't provide _OSC control for PCIe PCI hotplug: make sure child bridges are enabled at hotplug time PCI hotplug: shpchp: Removed check for hotplug of display devices PCI hotplug: pciehp: Fixed return value sign for pciehp_unconfigure_device PCI: Don't enable aspm before drivers have had a chance to veto it ...
| * PCI: update for owner removal from struct device_attributeStephen Rothwell2010-08-041-2/+2
| | | | | | | | | | | | | | | | Fixes the build. Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: Fix warnings when CONFIG_DMI unsetNarendra K2010-08-021-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the below warnings introduced by the commit 911e1c9b05a8e3559a7aa89083930700a0b9e7ee ("PCI: export SMBIOS provided firmware instance and label to sysfs"). drivers/pci/pci.h: In function ‘pci_create_firmware_label_files’: drivers/pci/pci.h:16: warning: ‘return’ with a value, in function returning void drivers/pci/pci.h: In function ‘pci_remove_firmware_label_files’: drivers/pci/pci.h:18: warning: ‘return’ with a value, in function returning void The warnings are seen because of the below code, doing a retun 0 from the functions 'pci_create_firmware_label_files' and 'pci_remove_firmware_label_files' defined as void. +#ifndef CONFIG_DMI +static inline void pci_create_firmware_label_files(struct pci_dev *pdev) +{ return 0; } +static inline void pci_remove_firmware_label_files(struct pci_dev *pdev) +{ return 0; } Signed-off-by: Narendra K <narendra_k@dell.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: Do not run NVidia quirks related to MSI with MSI disabledRafael J. Wysocki2010-07-301-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is no reason to run NVidia-specific quirks related to HT MSI mappings with MSI disabled via pci=nomsi, so make __nv_msi_ht_cap_quirk() return immediately in that case. This allows at least one machine to boot 100% of the time with pci=nomsi (it still doesn't boot reliably without that). Addresses https://bugzilla.kernel.org/show_bug.cgi?id=16443 . Cc: stable@kernel.org Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: use for_each_pci_dev()Kulikov Vasiliy2010-07-305-7/+6Star
| | | | | | | | | | | | | | Use for_each_pci_dev() to simplify the code. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: MSI: Restore read_msi_msg_desc(); add get_cached_msi_msg_desc()Ben Hutchings2010-07-301-5/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 2ca1af9aa3285c6a5f103ed31ad09f7399fc65d7 "PCI: MSI: Remove unsafe and unnecessary hardware access" changed read_msi_msg_desc() to return the last MSI message written instead of reading it from the device, since it may be called while the device is in a reduced power state. However, the pSeries platform code really does need to read messages from the device, since they are initially written by firmware. Therefore: - Restore the previous behaviour of read_msi_msg_desc() - Add new functions get_cached_msi_msg{,_desc}() which return the last MSI message written - Use the new functions where appropriate Acked-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: export SMBIOS provided firmware instance and label to sysfsNarendra K2010-07-304-0/+160
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch exports SMBIOS provided firmware instance and label of onboard PCI devices to sysfs. New files are: /sys/bus/pci/devices/.../label which contains the firmware name for the device in question, and /sys/bus/pci/devices/.../index which contains the firmware device type instance for the given device. Signed-off-by: Jordan Hargrave <jordan_hargrave@dell.com> Signed-off-by: Narendra K <narendra_k@dell.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: Allow read/write access to sysfs I/O port resourcesAlex Williamson2010-07-301-0/+68
| | | | | | | | | | | | | | | | | | | | | | PCI sysfs resource files currently only allow mmap'ing. On x86 this works fine for memory backed BARs, but doesn't work at all for I/O port backed BARs. Add read/write to I/O port PCI sysfs resource files to allow userspace access to these device regions. Acked-by: Chris Wright <chrisw@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: remove unused HAVE_ARCH_PCI_SET_DMA_MAX_SEGMENT_{SIZE|BOUNDARY}FUJITA Tomonori2010-07-301-4/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | In 2.6.34, we transformed the PCI DMA API into the generic device mode. The PCI DMA API is just the wrapper of the DMA API. So we don't need HAVE_ARCH_PCI_SET_DMA_MAX_SEGMENT_SIZE or HAVE_ARCH_PCI_SET_DMA_SEGMENT_BOUNDARY (which enable architectures to have the own implementations). Both haven't been used anyway. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: disable mmio during bar sizingJacob Pan2010-07-302-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is a known issue that mmio decoding shall be disabled while doing PCI bar sizing. Host bridge and other devices (PCI PIC) shall be excluded for certain platforms. This patch mainly comes from Mathew Willcox's patch in http://kerneltrap.org/mailarchive/linux-kernel/2007/9/13/258969. A new flag bit "mmio_alway_on" is added to pci_dev with the intention that devices with their mmio decoding cannot be disabled during BAR sizing shall have this bit set, preferrablly in their quirks. Without this patch, Intel Moorestown platform graphics unit will be corrupted during bar sizing activities. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: MSI: Remove unsafe and unnecessary hardware accessBen Hutchings2010-07-301-23/+11Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During suspend on an SMP system, {read,write}_msi_msg_desc() may be called to mask and unmask interrupts on a device that is already in a reduced power state. At this point memory-mapped registers including MSI-X tables are not accessible, and config space may not be fully functional either. While a device is in a reduced power state its interrupts are effectively masked and its MSI(-X) state will be restored when it is brought back to D0. Therefore these functions can simply read and write msi_desc::msg for devices not in D0. Further, read_msi_msg_desc() should only ever be used to update a previously written message, so it can always read msi_desc::msg and never needs to touch the hardware. Tested-by: "Michael Chan" <mchan@broadcom.com> Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: Default PCIe ASPM control to on and require !EMBEDDED to disableMatthew Garrett2010-07-301-6/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The CONFIG_PCIEASPM option is confusing and potentially dangerous. ASPM is a hardware mediated feature rather than one under direct OS control, and even if the config option is disabled the system firmware may have turned on ASPM on various bits of hardware. This can cause problems later - various hardware that claims to support ASPM does a poor job of it and may hang or cause other difficulties. The kernel is able to recognise this in many cases and disable the ASPM functionality, but only if CONFIG_PCIEASPM is enabled. Given that in its default configuration this option will either leave the hardware as it was originally or disable hardware functionality that may cause problems, it should by default y. The only reason to disable it ought to be to reduce code size, so make it dependent on CONFIG_EMBEDDED. Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: lrodriguez@atheros.com Cc: maximlevitsky@gmail.com Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: kernel oops on access to pci proc file while hot-removalKenji Kaneshige2010-07-301-2/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I encountered the problem that /proc/bus/pci/XX/YY is not removed even after the corresponding device is hot-removed, if the file is still being opened. In addtion, accessing this file in this situation causes kernel panic (see below). Becasue the pci_proc_detach_device() doesn't call remove_proc_entry() if struct proc_dir_entry->count > 1, access to /proc/bus/pci/XX/YY would refer to struct pci_dev that was already freed. Though I don't know why the check for proc_dir_entry->count was added, I don't think it is needed. Removing this check fixes the problem. Steps to reproduce ------------------ # cd /sys/bus/pci/slots/2/ # PROC_BUS_PCI_FILE=/proc/bus/pci/`awk -F: '{print $2"/"$3}' < address`.0 # sleep 10000 < $PROC_BUS_PCI_FILE & # echo 0 > power # while true; do cat $PROC_BUS_PCI_FILE > /dev/null; done Oops Messages ------------- BUG: unable to handle kernel NULL pointer dereference at 00000042 IP: [<c05c82d5>] pci_user_read_config_dword+0x65/0xa0 *pdpt = 000000002185e001 *pde = 0000000476a79067 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/pci0000:00/0000:00:1c.0/0000:10:00.0/local_cpus Modules linked in: autofs4 sunrpc cpufreq_ondemand acpi_cpufreq ipv6 dm_mirror dm_region_hash dm_log dm_mod e1000e i2c_i801 i2c_core iTCO_wdt igb sg pcspkr dca iTCO_vendor_support ext4 mbcache jbd2 sd_mod crc_t10dif lpfc mptsas scsi_transport_fc mptscsih mptbase scsi_tgt scsi_transport_sas [last unloaded: microcode] Pid: 2997, comm: cat Not tainted 2.6.34-kk #32 SB/PRIMEQUEST 1800E EIP: 0060:[<c05c82d5>] EFLAGS: 00010046 CPU: 19 EIP is at pci_user_read_config_dword+0x65/0xa0 EAX: 00000002 EBX: e44f1800 ECX: e144df14 EDX: 155668c7 ESI: 00000087 EDI: 00000000 EBP: e144df40 ESP: e144df0c DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process cat (pid: 2997, ti=e144c000 task=e26f2570 task.ti=e144c000) Stack: c09ceac0 c0570f72 ffffffff 08c57000 00000000 00001000 e44f1800 c05d2404 <0> e144df40 00001000 00000000 00001000 08c57000 3093ae50 e420cb40 e358d5c0 <0> c05d2300 fffffffb c054984f e144df9c 00008000 08c57000 e358d5c0 00008000 Call Trace: [<c0570f72>] ? security_capable+0x22/0x30 [<c05d2404>] ? proc_bus_pci_read+0x104/0x220 [<c05d2300>] ? proc_bus_pci_read+0x0/0x220 [<c054984f>] ? proc_reg_read+0x5f/0x90 [<c05497f0>] ? proc_reg_read+0x0/0x90 [<c050694d>] ? vfs_read+0x9d/0x190 [<c04958f4>] ? audit_syscall_entry+0x204/0x230 [<c0506a81>] ? sys_read+0x41/0x70 [<c0402f1f>] ? sysenter_do_call+0x12/0x28 Code: b4 26 00 00 00 00 b8 20 88 b1 c0 c7 44 24 08 ff ff ff ff e8 3e 52 22 00 f6 83 24 04 00 00 20 75 34 8b 43 08 8d 4c 24 08 8b 53 1c <8b> 70 40 89 4c 24 04 89 f9 c7 04 24 04 00 00 00 ff 16 89 c6 f0 EIP: [<c05c82d5>] pci_user_read_config_dword+0x65/0xa0 SS:ESP 0068:e144df0c CR2: 0000000000000042 Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: pci-sysfs: remove casts from void*Kulikov Vasiliy2010-07-301-1/+1
| | | | | | | | | | | | | | Remove unnesessary casts from void*. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI hotplug: make sure child bridges are enabled at hotplug timeYinghai Lu2010-07-301-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Found one PCIe Module with several bridges built-in where a "cold" hotadd doesn't work. If we end up reassigning bridge windows at hotadd time, and have to loop through assigning new ranges, we won't end up enabling the child bridges because the first assignment pass already tried to enable them, which prevents __pci_bridge_assign_resource from updating the windows. So try to move enabling of child bridges to the end, and only do it once. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI hotplug: shpchp: Removed check for hotplug of display devicesPraveen Kalamegham2010-07-301-15/+4Star
| | | | | | | | | | | | | | | | | | | | | | | | Removed check to prevent hotplug of display devices within shpchp. Originally this was thought to have been required within the PCI Hotplug specification for some legacy devices. However there is no such requirement in the most recent revision. The check prevents hotplug of not only display devices but also computational GPUs which require serviceability. Signed-off-by: Praveen Kalamegham <praveen@nextio.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI hotplug: pciehp: Fixed return value sign for pciehp_unconfigure_devicePraveen Kalamegham2010-07-301-1/+1
| | | | | | | | | | | | | | pciehp_unconfigure_device() should return -EINVAL, not EINVAL. Signed-off-by: Praveen Kalamegham <praveen@nextio.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: Don't enable aspm before drivers have had a chance to veto itMatthew Garrett2010-07-301-2/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The aspm code will currently set the configured aspm policy before drivers have had an opportunity to indicate that their hardware doesn't support it. Unfortunately, putting some hardware in L0 or L1 can result in the hardware no longer responding to any requests, even after aspm is disabled. It makes more sense to leave aspm policy at the BIOS defaults at initial setup time, reconfiguring it after pci_enable_device() is called. This allows the driver to blacklist individual devices beforehand. Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: fix wrong memory address handling in MSI-XKenji Kaneshige2010-07-301-1/+1
| | | | | | | | | | | | | | | | | | Use resource_size_t for MMIO address instead of unsigned long. Otherwise, higher 32-bits of MMIO address are cleared unexpectedly in x86-32 PAE. Acked-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: check return value of pci_enable_device() when enabling bridgesJunchang Wang2010-07-301-0/+2
| | | | | | | | | | | | | | | | | | pci_enable_device can fail. In that case, a printed warning would be more appropriate. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Junchang Wang <junchangwang@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: sparse warning (trivial)Stephen Hemminger2010-07-301-1/+1
| | | | | | | | | | | | | | Assigning zero where NULL should be used. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: disable MSI on VIA K8M800Tejun Heo2010-07-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | MSI delivery from on-board ahci controller doesn't work on K8M800. At this point, it's unclear whether the culprit is with the ahci controller or the host bridge. Given the track record and considering the rather minimal impact of MSI, disabling it seems reasonable. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Rainer Hurtado Navarro <publio.escipion.el.africano@gmail.com> Cc: stable@kernel.org Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI quirk: AMD 780: work around wrong vendor ID on APC bridgeClemens Ladisch2010-07-301-3/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In all AMD 780 family northbridges, the vendor ID of the internal graphics PCI/PCI bridge reads not as AMD but as that of the mainboard vendor, because the hardware actually returns the value of the subsystem vendor ID (erratum 18). We currently have additional quirk entries for Asus and Acer, but it is likely that we will encounter more systems with other vendor IDs. Since we do not know in advance all possible vendor IDs, a better way to find the device is to declare the quirk on the host bridge, whose ID is always correct, and use that device as a stepping stone to find the PCI/ PCI bridge, if present. Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: hotplug/shpchp_hpc: add parenthesis in SLOT_REG_RSVDZ_MASKDan Carpenter2010-07-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | The SLOT_REG_RSVDZ_MASK macro is normally used like this: slot_reg &= ~SLOT_REG_RSVDZ_MASK; The ~ operator has higher precedence than the | operator from inside the macro, so it needs parenthesis. Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI aerdrv: fix annoying warningsLinus Torvalds2010-07-301-8/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some compiler generates following warnings: In function 'aer_isr': warning: 'e_src.id' may be used uninitialized in this function warning: 'e_src.status' may be used uninitialized in this function Avoid status flag "int ret" and return constants instead, so that gcc sees the return value matching "it is initialized" better. Acked-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: change device runtime PM settings for probe and removeAlan Stern2010-07-301-3/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1388) changes the way the PCI core handles runtime PM settings when probing or unbinding drivers. Now the core will make sure the device is enabled for runtime PM, with a usage count >= 1, when a driver is probed. It does the same when calling a driver's remove method. If the driver wants to use runtime PM, all it has to do is call pm_runtime_pu_noidle() near the end of its probe routine (to cancel the core's usage increment) and pm_runtime_get_noresume() near the start of its remove routine (to restore the usage count). It does not need to mess around with setting the runtime state to enabled, disabled, active, or suspended. The patch updates e1000e and r8169, the only PCI drivers that already use the existing runtime PM interface. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | pci: fix type warnings in intr_remapping.cLinus Torvalds2010-08-061-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 69309a059075 ("x86, asm: Clean up and simplify set_64bit()") sanitized the x86-64 types to set_64bit(), and incidentally resulted in warnings like drivers/pci/intr_remapping.c: In function 'modify_irte': drivers/pci/intr_remapping.c:314: warning: passing argument 1 of 'set_64bit' from incompatible pointer type arch/x86/include/asm/cmpxchg_64.h:6: note:expected 'volatile u64 *' but argument is of type 'long unsigned int *' It turns out that the change to set_64bit() really does clean up things, and the PCI intr_remapping.c file did a rather ugly cast in order to avoid warnings with the previous set_64bit() type model. Removing the ugly cast fixes the warning, and makes everybody happy and expects a set_64bit() to take the logical "u64 *" argument. Pointed-out-by: Peter Anvin <hpa@zytor.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Merge branch 'core-iommu-for-linus' of ↵Linus Torvalds2010-08-061-0/+2
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86/amd-iommu: Export cache-coherency capability iommu-api: Extension to check for interrupt remapping x86/amd-iommu: Use for_each_pci_dev()
| | \
| | \
| *-. \ Merge branches 'iommu-api/2.6.36' and 'amd-iommu/2.6.36' into iommu/2.6.36Joerg Roedel2010-07-271-0/+2
| |\ \ \ | | |_|/ | |/| |
| | * | iommu-api: Extension to check for interrupt remappingTom Lyon2010-07-191-0/+2
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch allows IOMMU users to determine whether the hardware and software support safe, isolated interrupt remapping. Not all Intel IOMMUs have the hardware, and the software for AMD is not there yet. Signed-off-by: Tom Lyon <pugs@cisco.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
* | | Merge branch 'upstream-linus' of ↵Linus Torvalds2010-08-061-0/+6
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: sata_fsl,mv,nv: prepare for NCQ command completion update ata: Convert pci_table entries to PCI_VDEVICE (if PCI_ANY_ID is used) libata: more PCI IDs for jmicron controllers ata_piix: fix locking around SIDPR access [libata] update blacklist for new hyphenated pattern ranges (v2) libata: allow hyphenated pattern ranges ata_generic: drop hard coded DMA force logic for CENATEK [libata] ahci: Fix warning: comparison between 'enum <anonymous>' and 'enum <anonymous>' [libata] add ATA_CMD_DSM to ata_get_cmd_descript [libata] Add Samsung PATA controller driver, pata_samsung_cf [libata] Add 460EX on-chip SATA driver, sata_dwc_460ex libata: reduce blacklist size even more (v2) libata: reduce blacklist size (v2) libata: glob_match for ata_device_blacklist (v2) ahci_platform: Remove unneeded ahci_driver.probe assignment ahci_platform: Provide for vendor specific init
| * | | libata: more PCI IDs for jmicron controllersTejun Heo2010-08-021-0/+6
| |/ / | | | | | | | | | | | | | | | | | | | | | Add support for JMB364 and 369. Patch-originally-from: Aries Lee <arieslee@jmicron.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* / / PM: Make it possible to avoid races between wakeup and system sleepRafael J. Wysocki2010-07-194-2/+25
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | One of the arguments during the suspend blockers discussion was that the mainline kernel didn't contain any mechanisms making it possible to avoid races between wakeup and system suspend. Generally, there are two problems in that area. First, if a wakeup event occurs exactly when /sys/power/state is being written to, it may be delivered to user space right before the freezer kicks in, so the user space consumer of the event may not be able to process it before the system is suspended. Second, if a wakeup event occurs after user space has been frozen, it is not generally guaranteed that the ongoing transition of the system into a sleep state will be aborted. To address these issues introduce a new global sysfs attribute, /sys/power/wakeup_count, associated with a running counter of wakeup events and three helper functions, pm_stay_awake(), pm_relax(), and pm_wakeup_event(), that may be used by kernel subsystems to control the behavior of this attribute and to request the PM core to abort system transitions into a sleep state already in progress. The /sys/power/wakeup_count file may be read from or written to by user space. Reads will always succeed (unless interrupted by a signal) and return the current value of the wakeup events counter. Writes, however, will only succeed if the written number is equal to the current value of the wakeup events counter. If a write is successful, it will cause the kernel to save the current value of the wakeup events counter and to abort the subsequent system transition into a sleep state if any wakeup events are reported after the write has returned. [The assumption is that before writing to /sys/power/state user space will first read from /sys/power/wakeup_count. Next, user space consumers of wakeup events will have a chance to acknowledge or veto the upcoming system transition to a sleep state. Finally, if the transition is allowed to proceed, /sys/power/wakeup_count will be written to and if that succeeds, /sys/power/state will be written to as well. Still, if any wakeup events are reported to the PM core by kernel subsystems after that point, the transition will be aborted.] Additionally, put a wakeup events counter into struct dev_pm_info and make these per-device wakeup event counters available via sysfs, so that it's possible to check the activity of various wakeup event sources within the kernel. To illustrate how subsystems can use pm_wakeup_event(), make the low-level PCI runtime PM wakeup-handling code use it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: markgross <markgross@thegnar.org> Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
* / PCI: fall back to original BIOS BAR addressesBjorn Helgaas2010-07-161-0/+32
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If we fail to assign resources to a PCI BAR, this patch makes us try the original address from BIOS rather than leaving it disabled. Linux tries to make sure all PCI device BARs are inside the upstream PCI host bridge or P2P bridge apertures, reassigning BARs if necessary. Windows does similar reassignment. Before this patch, if we could not move a BAR into an aperture, we left the resource unassigned, i.e., at address zero. Windows leaves such BARs at the original BIOS addresses, and this patch makes Linux do the same. This is a bit ugly because we disable the resource long before we try to reassign it, so we have to keep track of the BIOS BAR address somewhere. For lack of a better place, I put it in the struct pci_dev. I think it would be cleaner to attempt the assignment immediately when the claim fails, so we could easily remember the original address. But we currently claim motherboard resources in the middle, after attempting to claim PCI resources and before assigning new PCI resources, and changing that is a fairly big job. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=16263 Reported-by: Andrew <nitr0@seti.kr.ua> Tested-by: Andrew <nitr0@seti.kr.ua> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* Merge branch 'virtio' of ↵Linus Torvalds2010-06-271-0/+1
|\ | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6 * 'virtio' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6: virtio-pci: disable msi at startup virtio: return ENOMEM on out of memory
| * virtio-pci: disable msi at startupMichael S. Tsirkin2010-06-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | virtio-pci resets the device at startup by writing to the status register, but this does not clear the pci config space, specifically msi enable status which affects register layout. This breaks things like kdump when they try to use e.g. virtio-blk. Fix by forcing msi off at startup. Since pci.c already has a routine to do this, we export and use it instead of duplicating code. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: linux-pci@vger.kernel.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: stable@kernel.org
* | Merge branch 'for-linus' of ↵Linus Torvalds2010-06-271-6/+13
|\ \ | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI/PM: Do not use native PCIe PME by default
| * | PCI/PM: Do not use native PCIe PME by defaultRafael J. Wysocki2010-06-181-6/+13
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit c7f486567c1d0acd2e4166c47069835b9f75e77b (PCI PM: PCIe PME root port service driver) causes the native PCIe PME signaling to be used by default, if the BIOS allows the kernel to control the standard configuration registers of PCIe root ports. However, the native PCIe PME is coupled to the native PCIe hotplug and calling pcie_pme_acpi_setup() makes some BIOSes expect that the native PCIe hotplug will be used as well. That, in turn, causes problems to appear on systems where the PCIe hotplug driver is not loaded. The usual symptom, as reported by Jaroslav Kameník and others, is that the ACPI GPE associated with PCIe hotplug keeps firing continuously causing kacpid to take substantial percentage of CPU time. To work around this issue, change the default so that the native PCIe PME signaling is only used if directly requested with the help of the pcie_pme= command line switch. Fixes https://bugzilla.kernel.org/show_bug.cgi?id=15924 , which is a listed regression from 2.6.33. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reported-by: Jaroslav Kameník <jaroslav@kamenik.cz> Tested-by: Antoni Grzymala <antekgrzymala@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | intel-iommu: Force-disable IOMMU for iGFX on broken Cantiga revisions.David Woodhouse2010-06-151-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Certain revisions of this chipset appear to be broken. There is a shadow GTT which mirrors the real GTT but contains pre-translated physical addresses, for performance reasons. When a GTT update happens, the translations are done once and the resulting physical addresses written back to the shadow GTT. Except sometimes, the physical address is actually written back to the _real_ GTT, not the shadow GTT. Thus we start to see faults when that physical address is fed through translation again. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* | intel-iommu: Fix double lock in get_domain_for_dev()Jiri Slaby2010-06-151-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | stanse found the following double lock. In get_domain_for_dev: spin_lock_irqsave(&device_domain_lock, flags); domain_exit(domain); domain_remove_dev_info(domain); spin_lock_irqsave(&device_domain_lock, flags); spin_unlock_irqrestore(&device_domain_lock, flags); spin_unlock_irqrestore(&device_domain_lock, flags); This happens when the domain is created by another CPU at the same time as this function is creating one, and the other CPU wins the race to attach it to the device in question, so we have to destroy our own newly-created one. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* | intel-iommu: Fix reference by physical address in intel_iommu_attach_device()Sheng Yang2010-06-151-1/+2
|/ | | | | | | | | | | | | | Commit a99c47a2 "intel-iommu: errors with smaller iommu widths" replace the dmar_domain->pgd with the first entry of page table when iommu's supported width is smaller than dmar_domain's. But it use physical address directly for new dmar_domain->pgd... This result in KVM oops with VT-d on some machines. Reported-by: Allen Kay <allen.m.kay@intel.com> Cc: Tom Lyon <pugs@cisco.com> Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* Merge branch 'for-linus' of ↵Linus Torvalds2010-06-114-90/+12Star
|\ | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: clear bridge resource range if BIOS assigned bad one PCI: hotplug/cpqphp, fix NULL dereference Revert "PCI: create function symlinks in /sys/bus/pci/slots/N/" PCI: change resource collision messages from KERN_ERR to KERN_INFO
| * PCI: hotplug/cpqphp, fix NULL dereferenceJiri Slaby2010-06-111-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are devices out there which are PCI Hot-plug controllers with compaq PCI IDs, but are not bridges, hence have pdev->subordinate NULL. But cpqphp expects the pointer to be non-NULL. Add a check to the probe function to avoid oopses like: BUG: unable to handle kernel NULL pointer dereference at 00000050 IP: [<f82e3c41>] cpqhpc_probe+0x951/0x1120 [cpqphp] *pdpt = 0000000033779001 *pde = 0000000000000000 ... The device here was: 00:0b.0 PCI Hot-plug controller [0804]: Compaq Computer Corporation PCI Hotplug Controller [0e11:a0f7] (rev 11) Subsystem: Compaq Computer Corporation Device [0e11:a2f8] Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Greg KH <greg@kroah.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * Revert "PCI: create function symlinks in /sys/bus/pci/slots/N/"Jesse Barnes2010-06-112-85/+0Star
| | | | | | | | | | | | | | | | | | | | This reverts commit 75568f8094eb0333e9c2109b23cbc8b82d318a3c. Since they're just a convenience anyway, remove these symlinks since they're causing duplicate filename errors in the wild. Acked-by: Alex Chiang <achiang@canonical.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: change resource collision messages from KERN_ERR to KERN_INFOBjorn Helgaas2010-06-111-5/+5
| | | | | | | | | | | | | | | | | | | | We can often deal with PCI resource issues by moving devices around. In that case, there's no point in alarming the user with messages like these. There are many bug reports where the message itself is the only problem, e.g., https://bugs.launchpad.net/ubuntu/+source/linux/+bug/413419 . Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | ahci: add pci quirk for JMB362Tejun Heo2010-06-071-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | JMB362 is a new variant of jmicron controller which is similar to JMB360 but has two SATA ports instead of one. As there is no PATA port, single function AHCI mode can be used as in JMB360. Add pci quirk for JMB362. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Aries Lee <arieslee@jmicron.com> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* | Merge branch 'release' of ↵Linus Torvalds2010-05-284-12/+98
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (27 commits) ACPI: Don't let acpi_pad needlessly mark TSC unstable drivers/acpi/sleep.h: Checkpatch cleanup ACPI: Minor cleanup eliminating redundant PMTIMER_TICKS to NS conversion ACPI: delete unused c-state promotion/demotion data strucutures ACPI: video: fix acpi_backlight=video ACPI: EC: Use kmemdup drivers/acpi: use kasprintf ACPI, APEI, EINJ injection parameters support Add x64 support to debugfs ACPI, APEI, Use ERST for persistent storage of MCE ACPI, APEI, Error Record Serialization Table (ERST) support ACPI, APEI, Generic Hardware Error Source memory error support ACPI, APEI, UEFI Common Platform Error Record (CPER) header Unified UUID/GUID definition ACPI Hardware Error Device (PNP0C33) support ACPI, APEI, PCIE AER, use general HEST table parsing in AER firmware_first setup ACPI, APEI, Document for APEI ACPI, APEI, EINJ support ACPI, APEI, HEST table parsing ACPI, APEI, APEI supporting infrastructure ...
| * ACPI, APEI, PCIE AER, use general HEST table parsing in AER firmware_first setupHuang Ying2010-05-204-12/+98
| | | | | | | | | | | | | | | | | | | | | | | | | | Now, a dedicated HEST tabling parsing code is used for PCIE AER firmware_first setup. It is rebased on general HEST tabling parsing code of APEI. The firmware_first setup code is moved from PCI core to AER driver too, because it is only AER related. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Len Brown <len.brown@intel.com>
* | Merge branch 'linux-next' of ↵Linus Torvalds2010-05-2212-417/+508
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (36 commits) PCI: hotplug: pciehp: Removed check for hotplug of display devices PCI: read memory ranges out of Broadcom CNB20LE host bridge PCI: Allow manual resource allocation for PCI hotplug bridges x86/PCI: make ACPI MCFG reserved error messages ACPI specific PCI hotplug: Use kmemdup PM/PCI: Update PCI power management documentation PCI: output FW warning in pci_read/write_vpd PCI: fix typos pci_device_dis/enable to pci_dis/enable_device in comments PCI quirks: disable msi on AMD rs4xx internal gfx bridges PCI: Disable MSI for MCP55 on P5N32-E SLI x86/PCI: irq and pci_ids patch for additional Intel Cougar Point DeviceIDs PCI: aerdrv: trivial cleanup for aerdrv_core.c PCI: aerdrv: trivial cleanup for aerdrv.c PCI: aerdrv: introduce default_downstream_reset_link PCI: aerdrv: rework find_aer_service PCI: aerdrv: remove is_downstream PCI: aerdrv: remove magical ROOT_ERR_STATUS_MASKS PCI: aerdrv: redefine PCI_ERR_ROOT_*_SRC PCI: aerdrv: rework do_recovery PCI: aerdrv: rework get_e_source() ...
| * | PCI: hotplug: pciehp: Removed check for hotplug of display devicesPraveen Kalamegham2010-05-211-14/+3Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Removed check to prevent hotplug of display devices within pciehp. Originally this was thought to have been required within the PCI Hotplug specification for some legacy devices. However there is no such requirement in the most recent revision. The check prevents hotplug of not only display devices but also computational GPUs which require serviceability. Signed-off-by: Praveen Kalamegham <praveen@nextio.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-20 03:17:02 +0200