summaryrefslogtreecommitdiffstats
path: root/drivers/pinctrl/intel/pinctrl-intel.c
Commit message (Collapse)AuthorAgeFilesLines
* pinctrl: intel: unlock on error in intel_config_set_pull()Dan Carpenter2017-02-131-2/+4
| | | | | | | | We need to unlock before returning -EINVAL on this error path. Fixes: 04cc058f0c52 ("pinctrl: intel: Add support for 1k additional pull-down") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: intel: Add support for 1k additional pull-downMika Westerberg2017-01-301-1/+17
| | | | | | | | | The next generation Intel GPIO hardware supports additional 1k pull-down per-pad. Add support for this to the Intel core pinctrl driver. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: intel: Add support for hardware debouncerMika Westerberg2017-01-301-2/+128
| | | | | | | | | | | | | | The next generation Intel GPIO hardware has two additional registers PADCFG2 and PADCFG3. The latter is marked as reserved but the former includes configuration for per-pad hardware debouncer. This patch adds support for that in the Intel pinctrl core driver. Since these are additional features on top of the current generation hardware, we use revision number and feature flags to enable this if detected. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Merge tag 'v4.10-rc6' into develLinus Walleij2017-01-301-11/+19
|\ | | | | | | | | | | | | | | Linux 4.10-rc6 Resolved conflicts in: drivers/pinctrl/pinctrl-amd.c drivers/pinctrl/samsung/pinctrl-exynos.c
| * pinctrl: intel: Set pin direction properlyAndy Shevchenko2017-01-111-11/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are two bits in the PADCFG0 register to configure direction, one per TX/RX buffers. For now we wrongly assume that the GPIO is always requested before it is being used, which is not true when the GPIO is used through irqchip. In this case the GPIO is never requested and we never enable RX buffer for it. Fix this by setting both bits accordingly. Reported-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | pinctrl: intel: Convert to use devm_gpiochip_add_data()Mika Westerberg2017-01-111-19/+4Star
|/ | | | | | | | | This simplifies error handling and allows us to drop intel_pinctrl_remove() completely. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: intel: set default handler to be handle_bad_irq()Andy Shevchenko2016-12-071-1/+1
| | | | | | | | | We switch the default handler to be handle_bad_irq() instead of handle_simple_irq() (which was not correct anyway). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: intel: Only restore pins that are used by the driverMika Westerberg2016-10-181-2/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | Dell XPS 13 (and maybe some others) uses a GPIO (CPU_GP_1) during suspend to explicitly disable USB touchscreen interrupt. This is done to prevent situation where the lid is closed the touchscreen is left functional. The pinctrl driver (wrongly) assumes it owns all pins which are owned by host and not locked down. It is perfectly fine for BIOS to use those pins as it is also considered as host in this context. What happens is that when the lid of Dell XPS 13 is closed, the BIOS configures CPU_GP_1 low disabling the touchscreen interrupt. During resume we restore all host owned pins to the known state which includes CPU_GP_1 and this overwrites what the BIOS has programmed there causing the touchscreen to fail as no interrupts are reaching the CPU anymore. Fix this by restoring only those pins we know are explicitly requested by the kernel one way or other. Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=176361 Reported-by: AceLan Kao <acelan.kao@canonical.com> Tested-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: intel: Configure GPIO chip IRQ as wakeup interruptsNilesh Bacchewar2016-09-231-28/+5Star
| | | | | | | | | | | | | | | | | | | | On some Intel BXT platform, wake-up from suspend-to-idle on pressing power-button is not working. Its noticed that gpio-keys driver marking the second level IRQ/power-button as wake capable but Intel pintctrl driver is missing to mark GPIO chip/controller IRQ which first level IRQ as wake cable if its GPIO pin IRQ is wakeble. So, though the first level IRQ gets generated on power-button press, since it is not marked as wake capable resume/wake-up flow is not happening. Intel pintctrl/GPIO driver need to mark GPIO chip/controller IRQ (first level IRQ) as wake capable iff GPIO pin's IRQ (second level IRQ) is marked as wake cable. Changes in v2: - Add missing irq initialisation. Signed-off-by: Nilesh Bacchewar <nilesh.bacchewar@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: intel: Protect set wake flow by spin lockAndy Shevchenko2016-07-111-0/+5
| | | | | | | | | It seems intel_gpio_irq_wake() misses lock protection against I/O flow. Use spin lock here as well. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: intel: Prevent force threading of the interrupt handlerMika Westerberg2016-06-181-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The pinctrl-intel needs to use request_irq() instead of chained interrupt handling because it shares the interrupt with multiple GPIO host controllers found on Intel CPUs. In -rt all such interrupts are forced to run in thread context which triggers following warning: WARNING: CPU: 0 PID: 530 at kernel/irq/handle.c:151 handle_irq_event_percpu+0x23d/0x240 irq 348 handler irq_default_primary_handler+0x0/0x10 enabled interrupts Modules linked in: CPU: 0 PID: 530 Comm: irq/14-INT3452: Not tainted 4.6.2-rt5 #1060 0000000000000000 ffff88007a257c98 ffffffff812d8494 ffff88007a257ce8 0000000000000000 ffff88007a257cd8 ffffffff8105e554 000000977a257d90 ffff88007a37a380 000000000000015c 0000000000000002 0000000000000000 Call Trace: [<ffffffff812d8494>] dump_stack+0x4f/0x6b [<ffffffff8105e554>] __warn+0xe4/0x100 [<ffffffff8105e5bf>] warn_slowpath_fmt+0x4f/0x60 [<ffffffff810b18f0>] ? __synchronize_hardirq+0x60/0x60 [<ffffffff810b17fd>] handle_irq_event_percpu+0x23d/0x240 [<ffffffff810b1862>] handle_irq_event+0x62/0x90 [<ffffffff810b4e1f>] handle_edge_irq+0x8f/0x190 [<ffffffff810b0d82>] generic_handle_irq+0x22/0x30 [<ffffffff81307abc>] intel_gpio_irq+0xdc/0x150 [<ffffffff810b2293>] irq_forced_thread_fn+0x23/0x70 [<ffffffff810b250b>] irq_thread+0x13b/0x1d0 [<ffffffff8167b844>] ? __schedule+0x2e4/0x5a0 [<ffffffff810b2270>] ? irq_finalize_oneshot.part.37+0xd0/0xd0 [<ffffffff810b25a0>] ? irq_thread+0x1d0/0x1d0 [<ffffffff810b23d0>] ? wake_threads_waitq+0x30/0x30 [<ffffffff8107e624>] kthread+0xd4/0xf0 [<ffffffff8167ec27>] ? _raw_spin_unlock_irq+0x17/0x40 [<ffffffff8167f592>] ret_from_fork+0x22/0x40 [<ffffffff8107e550>] ? kthread_worker_fn+0x190/0x190 The handle_irq_event_* functions (and I suppose generic_handle_irq()) is expected to be called with interrupts disabled and they rightfully complain here because we run in thread context with interrupts enabled. Fix this by adding IRQF_NO_THREAD flag when the master interrupt is requested. This prevents forced threading of the interrupt used by the GPIO host controllers. Reported-by: Kim Tatt Chuah <kim.tatt.chuah@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: intel: Use raw_spinlock for lockingMika Westerberg2016-06-181-22/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When running -rt kernel and GPIO interrupt happens we get following BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:931 in_atomic(): 1, irqs_disabled(): 0, pid: 530, name: irq/14-INT3452: Preemption disabled at:[<ffffffff810b4dab>] handle_edge_irq+0x1b/0x190 CPU: 0 PID: 530 Comm: irq/14-INT3452: Not tainted 4.6.2-rt5 #1060 0000000000000000 ffff88007a257d58 ffffffff812d8494 0000000000000000 ffff88017a330000 ffff88007a257d78 ffffffff81083a11 ffff88007a252430 ffff88007a252430 ffff88007a257d90 ffffffff8167ef20 000000000000001a Call Trace: [<ffffffff812d8494>] dump_stack+0x4f/0x6b [<ffffffff81083a11>] ___might_sleep+0xe1/0x160 [<ffffffff8167ef20>] rt_spin_lock+0x20/0x50 [<ffffffff81308c6d>] intel_gpio_irq_ack+0x2d/0x80 [<ffffffff810b4e0b>] handle_edge_irq+0x7b/0x190 [<ffffffff810b0d82>] generic_handle_irq+0x22/0x30 [<ffffffff81307abc>] intel_gpio_irq+0xdc/0x150 [<ffffffff810b2293>] irq_forced_thread_fn+0x23/0x70 [<ffffffff810b250b>] irq_thread+0x13b/0x1d0 [<ffffffff8167b844>] ? __schedule+0x2e4/0x5a0 [<ffffffff810b2270>] ? irq_finalize_oneshot.part.37+0xd0/0xd0 [<ffffffff810b25a0>] ? irq_thread+0x1d0/0x1d0 [<ffffffff810b23d0>] ? wake_threads_waitq+0x30/0x30 [<ffffffff8107e624>] kthread+0xd4/0xf0 [<ffffffff8167ec27>] ? _raw_spin_unlock_irq+0x17/0x40 [<ffffffff8167f592>] ret_from_fork+0x22/0x40 [<ffffffff8107e550>] ? kthread_worker_fn+0x190/0x190 The reason why this happens is because intel_gpio_irq_ack() is called with desc->lock raw_spinlock locked which cannot sleep but our normal spinlock (which is converted to rtmutex in -rt) is allowed to sleep. This causes might_sleep() to trigger. Fix this by converting the normal spinlock to a raw_spinlock. Reported-by: Kim Tatt Chuah <kim.tatt.chuah@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Merge tag 'pinctrl-v4.7-1' of ↵Linus Torvalds2016-05-191-5/+3Star
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This kernel cycle was quite calm when it comes to pin control and there is really just one major change, and that is the introduction of devm_pinctrl_register() managed resources. Apart from that linear development, details below. Core changes: - Add the devm_pinctrl_register() API and switch all applicable drivers to use it, saving lots of lines of code all over the place. New drivers: - driver for the Broadcom NS2 SoC - subdriver for the PXA25x SoCs - subdriver for the AMLogic Meson GXBB SoC Driver improvements: - the Intel Baytrail driver now properly supports pin control - Nomadik, Rockchip, Broadcom BCM2835 support the .get_direction() callback in the GPIO portions - continued development and stabilization of several SH-PFC SoC subdrivers: r8a7795, r8a7790, r8a7794 etc" * tag 'pinctrl-v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (85 commits) Revert "pinctrl: tegra: avoid parked_reg and parked_bank" pinctrl: meson: Fix eth_tx_en bit index pinctrl: tegra: avoid parked_reg and parked_bank pinctrl: tegra: Correctly check the supported configuration pinctrl: amlogic: Add support for Amlogic Meson GXBB SoC pinctrl: rockchip: fix pull setting error for rk3399 pinctrl: stm32: Implement .pin_config_dbg_show() pinctrl: nomadik: hide nmk_gpio_get_mode when unused pinctrl: ns2: rename pinctrl_utils_dt_free_map pinctrl: at91: Merge clk_prepare and clk_enable into clk_prepare_enable pinctrl: at91: Make at91_gpio_template const pinctrl: baytrail: fix some error handling in debugfs pinctrl: ns2: add pinmux driver support for Broadcom NS2 SoC pinctrl: sirf/atlas7: trivial fix of spelling mistake on flagged pinctrl: sh-pfc: Kill unused variable in sh_pfc_remove() pinctrl: nomadik: implement .get_direction() pinctrl: nomadik: use BIT() with offsets consequently pinctrl: exynos5440: Use off-stack memory for pinctrl_gpio_range pinctrl: zynq: Use devm_pinctrl_register() for pinctrl registration pinctrl: u300: Use devm_pinctrl_register() for pinctrl registration ...
| * pinctrl: intel: Use devm_pinctrl_register() for pinctrl registrationLaxman Dewangan2016-04-211-5/+3Star
| | | | | | | | | | | | | | | | | | | | Use devm_pinctrl_register() for pin control registration and clean error path. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | pinctrl: intel: implement gpio_irq_enableQi Zheng2016-03-301-0/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | There is unexpected gpio interrupt after irq_enable. If not implemeted gpio_irq_enable callback, irq_enable calls irq_unmask instead. But if there was interrupt set before the irq_enable, unmask it may trigger the unexpected interrupt. By implementing the gpio_irq_enable callback, do interrupt status ack, the issue has gone. Signed-off-by: Qi Zheng <qi.zheng@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Qipeng Zha <qipeng.zha@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | pinctrl: intel: make the high level interrupt workingQipeng Zha2016-03-301-2/+3
|/ | | | | | | | | | | High level trigger mode of GPIO interrupt is not set correctly in intel_gpio_irq_type(), and will make this kind of interrupt not respond. Signed-off-by: Qi Zheng <qi.zheng@intel.com> Signed-off-by: Qipeng Zha <qipeng.zha@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: intel: Remove unneeded header includesJean Delvare2016-02-121-4/+0Star
| | | | | | | | | | | pinctrl-intel doesn't use anything from <linux/init.h>, <linux/acpi.h>, <linux/gpio.h> or <linux/pm.h>, so it should not include these header files. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: intel: use gpiochip data pointerLinus Walleij2016-01-051-8/+7Star
| | | | | | | | | | This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Merge tag 'v4.4-rc6' into develLinus Walleij2015-12-211-21/+20Star
|\ | | | | | | Linux 4.4-rc6
| * pinctrl: intel: fix offset calculation issue of register PAD_OWNQipeng Zha2015-12-101-4/+5
| | | | | | | | | | | | | | | | | | | | | | The calculation equation of PAD_OWN register offset is not correct for Broxton, verified this fix will get right offset for Broxton. Signed-off-by: Qi Zheng <qi.zheng@intel.com> Signed-off-by: Qipeng Zha <qipeng.zha@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * pinctrl: intel: fix bug of register offset calculationQipeng Zha2015-12-101-17/+15Star
| | | | | | | | | | | | | | | | | | | | | | The group size for registers PADCFGLOCK, HOSTSW_OWN, GPI_IS, GPI_IE, are not 24 for Broxton, Add a parameter to allow different platform to set correct value. Signed-off-by: Qi Zheng <qi.zheng@intel.com> Signed-off-by: Qipeng Zha <qipeng.zha@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | gpio: change member .dev to .parentLinus Walleij2015-11-191-1/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Merge tag 'gpio-v4.4-1' of ↵Linus Torvalds2015-11-021-12/+2Star
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "Here is the bulk of GPIO changes for the v4.4 development cycle. The only changes hitting outside drivers/gpio are in the pin control subsystem and these seem to have settled nicely in linux-next. Development mistakes and catfights are nicely documented in the reverts as you can see. The outcome of the ABI fight is that we're working on a chardev ABI for GPIO now, where hope to show results for the v4.5 kernel. Summary of changes: GPIO core: - Define and handle flags for open drain/open collector and open source/open emitter, also know as "single-ended" configurations. - Generic request/free operations that handle calling out to the (optional) pin control backend. - Some refactoring related to an ABI change that did not happen, yet provide useful. - Added a real-time compliance checklist. Many GPIO chips have irqchips, and need to think this over with the RT patches going upstream. - Restructure, fix and clean up Kconfig menus a bit. New drivers: - New driver for AMD Promony. - New driver for ACCES 104-IDIO-16, a port-mapped I/O card, ISA-style. Very retro. Subdriver changes: - OMAP changes to handle real time requirements. - Handle trigger types for edge and level IRQs on PL061 properly. As this hardware is very common it needs to set a proper example for others to follow. - Some container_of() cleanups. - Delete the unused MSM driver in favor of the driver that is embedded inside the pin control driver. - Cleanup of the ath79 GPIO driver used by many, many OpenWRT router targets. - A consolidated IT87xx driver replacing the earlier very specific IT8761e driver. - Handle the TI TCA9539 in the PCA953x driver. Also handle ACPI devices in this subdriver. - Drop xilinx arch dependencies as these FPGAs seem to profilate over a few different architectures. MIPS and ARM come to mind" * tag 'gpio-v4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (57 commits) gpio: fix up SPI submenu gpio: drop surplus I2C dependencies gpio: drop surplus X86 dependencies gpio: dt-bindings: document the official use of "ngpios" gpio: MAINTAINERS: Add an entry for the ATH79 GPIO driver gpio / ACPI: Allow shared GPIO event to be read via operation region gpio: group port-mapped I/O drivers in a menu gpio: Add ACCES 104-IDIO-16 driver maintainer entry gpio: zynq: Document interrupt-controller DT binding gpio: xilinx: Drop architecture dependencies gpio: generic: Revert to old error handling in bgpio_map gpio: add a real time compliance notes Revert "gpio: add a real time compliance checklist" gpio: Add GPIO support for the ACCES 104-IDIO-16 gpio: driver for AMD Promontory gpio: xlp: Convert to use gpiolib irqchip helpers gpio: add a real time compliance checklist gpio/xilinx: enable for MIPS gpiolib: Add and use OF_GPIO_SINGLE_ENDED flag gpiolib: Split GPIO flags parsing and GPIO configuration ...
| * pinctrl: replace trivial implementations of gpio_chip request/freeJonas Gorski2015-10-161-12/+2Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace all trivial request/free callbacks that do nothing but call into pinctrl code with the generic versions. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Eric Anholt <eric@anholt.net> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Andrew Bresticker <abrestic@chromium.org> Acked-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Lee Jones <lee@kernel.org> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | pinctrl: intel: Allow requesting pins which are in ACPI mode as GPIOsMika Westerberg2015-10-271-4/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reserved for ACPI actually means that in such case the GPIO hardware will not update the interrupt status register (GPI_IS) even if the pin is configured to trigger an interrupt. It will update GPI_GPE_STS instead and does not trigger an interrupt. Allow using such pins as GPIOs, only prevent their usage as interrupts. We also rename function intel_pad_reserved_for_acpi() to be intel_pad_acpi_mode() which reflects the actual meaning better. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | pinctrl: intel: Add support for multiple GPIO chips sharing the interruptMika Westerberg2015-10-271-15/+37
| | | | | | | | | | | | | | | | | | | | | | | | On Intel Broxton the GPIO hardware consists of several chips that all share the parent interrupt. It is not possible to handle this by setting chained handler for each chip (as they will overwrite each other). To overcome this we need to request the interrupt using devm_request_irq() and pass IRQF_SHARED with the flags. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | pinctrl: intel: Fix compilation warning when !CONFIG_PM_SLEEPMika Westerberg2015-10-161-20/+20
|/ | | | | | | | | | | | We get following warning when CONFIG_PM_SLEEP is not set warning: ‘intel_gpio_irq_init’ defined but not used [-Wunused-function] Since the function is only called from intel_pinctrl_resume() move it inside CONFIG_PM_SLEEP guard as well. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* genirq: Remove irq argument from irq flow handlersThomas Gleixner2015-09-161-1/+1
| | | | | | | | | | | | | | Most interrupt flow handlers do not use the irq argument. Those few which use it can retrieve the irq number from the irq descriptor. Remove the argument. Search and replace was done with coccinelle and some extra helper scripts around it. Thanks to Julia for her help! Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com>
* pinctrl: Use irq_desc_get_xxx() to avoid redundant lookup of irq_descJiang Liu2015-07-171-1/+1
| | | | | | | | | | Use irq_desc_get_xxx() to avoid redundant lookup of irq_desc while we already have a pointer to corresponding irq_desc. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* pinctrl/intel: Use irq_set_handler_locked()Thomas Gleixner2015-07-171-2/+2
| | | | | | | | | | | | | Use irq_set_handler_locked() as it avoids a redundant lookup of the irq descriptor. Search and replacement was done with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org
* pinctrl: make pinctrl_register() return proper error codeMasahiro Yamada2015-06-101-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, pinctrl_register() just returns NULL on error, so the callers can not know the exact reason of the failure. Some of the pinctrl drivers return -EINVAL, some -ENODEV, and some -ENOMEM on error of pinctrl_register(), although the error code might be different from the real cause of the error. This commit reworks pinctrl_register() to return the appropriate error code and modifies all of the pinctrl drivers to use IS_ERR() for the error checking and PTR_ERR() for getting the error code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Lee Jones <lee@kernel.org> Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Ray Jui <rjui@broadcom.com> Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Hongzhou Yang <hongzhou.yang@mediatek.com> Acked-by: Wei Chen <Wei.Chen@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: intel: Add Intel Sunrisepoint pin controller and GPIO supportMika Westerberg2015-04-071-0/+1149
This driver supports pinctrl/GPIO hardware found on Intel Sunrisepoint (a Skylake PCH) providing users a pinctrl and GPIO interfaces (including GPIO interrupts). The driver is split into core and platform parts so that the same core driver can be reused in other drivers for other Intel GPIO hardware that is based on the same host controller design. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-22 12:41:49 +0200