summaryrefslogtreecommitdiffstats
path: root/drivers/pinctrl/sunxi/pinctrl-sunxi.c
Commit message (Collapse)AuthorAgeFilesLines
* pinctrl: sunxi: Introduce the strict flagMaxime Ripard2017-10-311-1/+11
| | | | | | | | | | | | | | | | Our pinctrl device should have had strict set all along. However, it wasn't the case, and most of our old device trees also have a pinctrl group in addition to the GPIOs properties, which mean that we can't really turn it on now. All our new SoCs don't have that group, so we should still enable that mode on the newer one though. In order to enable it by default, add a flag that will allow to disable that mode that should be set by pinctrl drivers that cannot be migrated. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Revert "pinctrl: sunxi: Don't enforce bias disable (for now)"Priit Laes2017-08-311-1/+2
| | | | | | | | | | | | This reverts commit 2154d94b40ea2a5de05245521371d0461bb0d669. The original patch was intented to avoid some issues with the sunxi gpio rework and was supposed to be reverted after all the required DT bits had been merged around v4.10. Signed-off-by: Priit Laes <plaes@plaes.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: sunxi: constify irq_domain_opsTobias Klauser2017-06-091-1/+1
| | | | | | | | | struct irq_domain_ops is not modified, so it can be made const. Suggested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: sunxi: make use of raw_spinlock variantsJulia Cartwright2017-03-161-13/+13
| | | | | | | | | | | | | | The sunxi pinctrl driver currently implement an irq_chip for handling interrupts; due to how irq_chip handling is done, it's necessary for the irq_chip methods to be invoked from hardirq context, even on a a real-time kernel. Because the spinlock_t type becomes a "sleeping" spinlock w/ RT kernels, it is not suitable to be used with irq_chips. A quick audit of the operations under the lock reveal that they do only minimal, bounded work, and are therefore safe to do under a raw spinlock. Signed-off-by: Julia Cartwright <julia@ni.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Merge tag 'pinctrl-v4.11-1' of ↵Linus Torvalds2017-02-221-21/+58
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Pin control bulk changes for the v4.11 kernel cycle. Core changes: - Switch the generic pin config argument from 16 to 24 bits, only use 8 bits for the configuration type. We might need to encode more information about a certain setting than we need to encode different generic settings. - Add a cross-talk API to the pin control GPIO back-end, utilizing pinctrl_gpio_set_config() from GPIO drivers that want to set up a certain pin configuration in the back-end. This also includes the .set_config() refactoring of the GPIO chips, so that they pass a generic configuration for things like debouncing and single ended (typically open drain). This change has also been merged in an immutable branch to the GPIO tree. - Take hogs with a delayed work, so that we finalize probing a pin controller before trying to get any hogs. - For pin controllers putting all group and function definitions into the device tree, we now have generic code to deal with this and it is used in two drivers so far. - Simplifications of the pin request conflict check. - Make dt_free_map() optional. Updates to drivers: - pinctrl-single now use the generic helpers to generate dynamic group and function tables from the device tree. - Texas Instruments IOdelay configuration driver add-on to pinctrl-single. - i.MX: use radix trees to store groups and functions, use the new generic group and function helpers to manage them. - Intel: add support for hardware debouncing and 1K pull-down. New subdriver for the Gemini Lake SoC. - Renesas SH-PFC: drive strength and bias support, CAN bus muxing, MSIOF, SDHI, HSCIF for r8a7796. Gyro-ADC supporton r8a7791. - Aspeed: use syscon cross-dependencies to set up related bits in the LPC host controller and display controller. - Aspeed: finalize G4 and G5 support. Fix mux configuration on GPIOs. Add banks Y, Z, AA, AB and AC. - AMD: support additional GPIO. - STM32: set this controller to strict muxing mode. STM32H743 MCU support. - Allwinner sunxi: deep simplifications on how to support subvariants of SoCs without adding to much SoC-specific data for each subvariant, especially for sun5i variants. New driver for V3s SoCs. New driver for the H5 SoC. Support A31/A31s variants with the new variant framework. - Mvebu: simplifications to use a MMIO and regmap abstraction. New subdrivers for the 98DX3236, 98DX5241 SoCs. - Samsung Exynos: delete Exynos4415 support. Add crosstalk to the SoC driver to access regmaps. Add infrastructure for pin-bank retention control. Clean out the pin retention control from arch/arm/mach-exynos and arch/arm/mach-s5p and put it properly in the Samsung pin control driver(s). - Meson: add HDMI HPD/DDC pins. Add pwm_ao_b pin. - Qualcomm: use raw spinlock variants: this makes the qualcomm driver realtime-safe" * tag 'pinctrl-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (111 commits) pinctrl: samsung: Fix return value check in samsung_pinctrl_get_soc_data() pinctrl: intel: unlock on error in intel_config_set_pull() pinctrl: berlin: make bool drivers explicitly non-modular pinctrl: spear: make bool drivers explicitly non-modular pinctrl: mvebu: make bool drivers explicitly non-modular pinctrl: sunxi: make sun5i explicitly non-modular pinctrl: sunxi: Remove stray printk call in sun5i driver's probe function pinctrl: samsung: mark PM functions as __maybe_unused pinctrl: sunxi: Remove redundant A31s pinctrl driver pinctrl: sunxi: Support A31/A31s with pinctrl variants pinctrl: Amend bindings for STM32 pinctrl pinctrl: Add STM32 pinctrl driver DT bindings pinctrl: stm32: Add STM32H743 MCU support include: dt-bindings: Add STM32H7 pinctrl DT defines gpio: aspeed: Remove dependence on GPIOF_* macros pinctrl: stm32: fix bad location of gpiochip_lock_as_irq drivers: pinctrl: add driver for Allwinner H5 SoC pinctrl: intel: Add Intel Gemini Lake pin controller support pinctrl: intel: Add support for 1k additional pull-down pinctrl: intel: Add support for hardware debouncer ...
| * Merge branch 'ib-pinctrl-genprops' into develLinus Walleij2017-01-261-1/+1
| |\
| | * pinctrl: Widen the generic pinconf argument from 16 to 24 bitsMika Westerberg2017-01-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current pinconf packed format allows only 16-bit argument limiting the maximum value 65535. For most types this is enough. However, debounce time can be in range of hundreths of milliseconds in case of mechanical switches so we cannot represent the worst case using the current format. In order to support larger values change the packed format so that the lower 8 bits are used as type which leaves 24 bits for the argument. This allows representing values up to 16777215 and debounce times up to 16 seconds. We also convert the existing users to use 32-bit integer when extracting argument from the packed configuration value. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | pinctrl: sunxi: Add pinctrl variantsMaxime Ripard2017-01-091-20/+57
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some SoCs are either supposed to be pin compatible (A10 and A20 for example), or are just repackaged versions of the same die (A10s, A13, GR8). In those case, having a full blown pinctrl driver just introduces duplication in both data size and maintainance effort. Add a variant option to both pins and functions to be able to limit the pins and functions described only to a subset of the SoC we support with a given driver. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* / pinctrl: sunxi: Don't enforce bias disable (for now)Maxime Ripard2017-01-301-2/+1Star
|/ | | | | | | | | | | | | | | | | | | | | | | | Commit 07fe64ba213f ("pinctrl: sunxi: Handle bias disable") actually enforced enforced the disabling of the pull up/down resistors instead of ignoring it like it was done before. This was part of a wider rework to switch to the generic pinconf bindings, and was meant to be merged together with DT patches that were switching to it, and removing what was considered default values by both the binding and the boards. This included no bias on a pin. However, those DT patches were delayed to 4.11, which would be fine only for a significant number boards having the bias setup wrong, which in turns break the MMC on those boards (and possibly other devices too). In order to avoid conflicts as much as possible, bring back the old behaviour for 4.10, and we'll revert that commit once all the DT bits will have landed. Tested-by: Priit Laes <plaes@plaes.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: sunxi: Testing the wrong variableDan Carpenter2016-11-221-2/+3
| | | | | | | | | | Smatch complains that we dereference "map" before testing it for NULL which is true. We should be testing "*map" instead. Also on the error path, we should free *map and set it to NULL. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: sunxi: fix theoretical uninitialized variable accessArnd Bergmann2016-11-161-2/+5
| | | | | | | | | | | | | | | | gcc warns about a way that it could use an uninitialized variable: drivers/pinctrl/sunxi/pinctrl-sunxi.c: In function 'sunxi_pinctrl_init': drivers/pinctrl/sunxi/pinctrl-sunxi.c:1191:8: error: 'best_div' may be used uninitialized in this function [-Werror=maybe-uninitialized] This cannot really happen except if 'freq' is UINT_MAX and 'clock' is zero, and both of these are forbidden. To shut up the warning anyway, this changes the logic to initialize the return code to the first divider value before looking at the others. Fixes: 7c926492d38a ("pinctrl: sunxi: Add support for interrupt debouncing") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: sunxi: Add support for interrupt debouncingMaxime Ripard2016-11-151-0/+84
| | | | | | | | | | | | | | | | | The pin controller found in the Allwinner SoCs has support for interrupts debouncing. However, this is not done per-pin, preventing us from using the generic pinconf binding for that, but per irq bank, which, depending on the SoC, ranges from one to five. Introduce a device-wide property to deal with this using a microsecond resolution. We can re-use the per-pin input-debounce property for that, so let's do it! Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: sunxi: Make sunxi_pconf_group_set use sunxi_pconf_reg helperChen-Yu Tsai2016-11-151-32/+32
| | | | | | | | | | | | | | | | | | | | The sunxi_pconf_reg helper introduced in the last patch gives us the chance to rework sunxi_pconf_group_set to have it match the structure of sunxi_pconf_(group_)get and make it easier to understand. For each config to set, it: 1. checks if the parameter is supported. 2. checks if the argument is within limits. 3. converts argument to the register value. 4. writes to the register with spinlock held. As a result the function now blocks unsupported config parameters, instead of silently ignoring them. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: sunxi: Add support for fetching pinconf settings from hardwareChen-Yu Tsai2016-11-151-5/+81
| | | | | | | | | | | | | | | | | | | | | | | | | The sunxi pinctrl driver only caches whatever pinconf setting was last set on a given pingroup. This is not particularly helpful, nor is it correct. Fix this by actually reading the hardware registers and returning the correct results or error codes. Also filter out unsupported pinconf settings. Since this driver has a peculiar setup of 1 pin per group, we can support both pin and pingroup pinconf setting read back with the same code. The sunxi_pconf_reg helper and code structure is inspired by pinctrl-msm. With this done we can also claim to support generic pinconf, by setting .is_generic = true in pinconf_ops. Also remove the cached config value. The behavior of this was never correct, as it only cached 1 setting instead of all of them. Since we can now read back settings directly from the hardware, it is no longer required. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: sunxi: Fix PIN_CONFIG_BIAS_PULL_{DOWN,UP} argumentChen-Yu Tsai2016-11-151-1/+5
| | | | | | | | | | | | | | According to pinconf-generic.h, the argument for PIN_CONFIG_BIAS_PULL_{DOWN,UP} is non-zero if the bias is enabled with a pull up/down resistor, zero if it is directly connected to VDD or ground. Since Allwinner hardware uses a weak pull resistor internally, the argument should be 1. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: sunxi: Free configs in pinctrl_map only if it is a config mapChen-Yu Tsai2016-11-151-2/+15
| | | | | | | | | | | | | | | | | | In the recently refactored sunxi pinctrl library, we are only allocating one set of pin configs for each pinmux setting node. When the pinctrl_map structure is freed, the pin configs should also be freed. However the code assumed the first map would contain the configs, which actually never happens, as the mux function map gets added first. The proper way to do this is to look through all the maps and free the first one whose type is actually PIN_MAP_TYPE_CONFIGS_GROUP. Also slightly expand the comment explaining this. Fixes: f233dbca6227 ("pinctrl: sunxi: Rework the pin config building code") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: sunxi: Deal with configless pinsMaxime Ripard2016-10-291-14/+37
| | | | | | | | | | | | Even though the our binding had the assumption that the allwinner,pull and allwinner,drive properties were optional, the code never took that into account. Fix that. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: sunxi: Support generic bindingMaxime Ripard2016-10-241-2/+46
| | | | | | | | | | | | Our bindings are mostly irrelevant now that we have generic pinctrl bindings that cover exactly the same uses cases. Add support for the new ones, and obviously keep our old binding support in order to keep the ABI stable. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: sunxi: Handle bias disableMaxime Ripard2016-10-241-0/+8
| | | | | | | | | | | | So far, putting NO_PULL in allwinner,pull was ignored, behaving like if that property was not there at all. Obviously, this is not the right thing to do, and in that case, we really need to just disable the bias. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: sunxi: Use macros from bindings header file for DT parsingMaxime Ripard2016-10-241-2/+4
| | | | | | | | | Since we have some bindings header for our hardcoded flags, let's use them when we can. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: sunxi: Rework the pin config building codeMaxime Ripard2016-10-241-48/+130
| | | | | | | | | | | | In order to support more easily the generic pinctrl properties, rework the pinctrl maps configuration and split it into several sub-functions. One of the side-effects from that rework is that we only parse the pin configuration once, since it's going to be common to every pin, instead of having to parsing once for each pin. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: acpi: separation of concernsLinus Walleij2016-10-031-1/+0Star
| | | | | | | | | | | | | | | | | | | | The generic GPIO library directly implement code for acpi_find_gpio() which is only used with CONFIG_ACPI. This was probably done because OF did the same thing, but I removed that so remove this too. Rename the internal acpi_find_gpio() in gpiolib-acpi.c to acpi_populate_gpio_lookup() which seems to be more appropriate anyway so as to avoid a namespace clash with the same function. Make the stub return -ENOENT rather than -ENOSYS (as that is for syscalls!). For some reason the sunxi pin control driver was including the private gpiolib header, it works just fine without it so remove that oneliner. Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Merge tag 'pinctrl-v4.7-1' of ↵Linus Torvalds2016-05-191-9/+4Star
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This kernel cycle was quite calm when it comes to pin control and there is really just one major change, and that is the introduction of devm_pinctrl_register() managed resources. Apart from that linear development, details below. Core changes: - Add the devm_pinctrl_register() API and switch all applicable drivers to use it, saving lots of lines of code all over the place. New drivers: - driver for the Broadcom NS2 SoC - subdriver for the PXA25x SoCs - subdriver for the AMLogic Meson GXBB SoC Driver improvements: - the Intel Baytrail driver now properly supports pin control - Nomadik, Rockchip, Broadcom BCM2835 support the .get_direction() callback in the GPIO portions - continued development and stabilization of several SH-PFC SoC subdrivers: r8a7795, r8a7790, r8a7794 etc" * tag 'pinctrl-v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (85 commits) Revert "pinctrl: tegra: avoid parked_reg and parked_bank" pinctrl: meson: Fix eth_tx_en bit index pinctrl: tegra: avoid parked_reg and parked_bank pinctrl: tegra: Correctly check the supported configuration pinctrl: amlogic: Add support for Amlogic Meson GXBB SoC pinctrl: rockchip: fix pull setting error for rk3399 pinctrl: stm32: Implement .pin_config_dbg_show() pinctrl: nomadik: hide nmk_gpio_get_mode when unused pinctrl: ns2: rename pinctrl_utils_dt_free_map pinctrl: at91: Merge clk_prepare and clk_enable into clk_prepare_enable pinctrl: at91: Make at91_gpio_template const pinctrl: baytrail: fix some error handling in debugfs pinctrl: ns2: add pinmux driver support for Broadcom NS2 SoC pinctrl: sirf/atlas7: trivial fix of spelling mistake on flagged pinctrl: sh-pfc: Kill unused variable in sh_pfc_remove() pinctrl: nomadik: implement .get_direction() pinctrl: nomadik: use BIT() with offsets consequently pinctrl: exynos5440: Use off-stack memory for pinctrl_gpio_range pinctrl: zynq: Use devm_pinctrl_register() for pinctrl registration pinctrl: u300: Use devm_pinctrl_register() for pinctrl registration ...
| * pinctrl: ssbi-mpp: Use devm_pinctrl_register() for pinctrl registrationLaxman Dewangan2016-04-211-9/+4Star
| | | | | | | | | | | | | | | | | | | | | | Use devm_pinctrl_register() for pin control registration and clean the error path. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | pinctrl: sunxi: Fix A33 external interrupts not workingHans de Goede2016-03-301-7/+10
|/ | | | | | | | | | | | | | | | | | | | | | | | | pinctrl-sun8i-a33.c (and the dts) declare only 2 interrupt banks, where as the closely related a23 has 3 banks. This matches with the datasheet for the A33 where only interrupt banks B and G are specified where as the A23 has banks A, B and G. However the A33 being the A23 derative it is means that the interrupt configure/status io-addresses for the 2 banks it has are not changed from the A23, iow they have the same address as if bank A was still present. Where as the sunxi pinctrl currently tries to use the A23 bank A addresses for bank B, since the pinctrl code does not know about the removed bank A. Add a irq_bank_base parameter and use this where appropriate to take the missing bank A into account. This fixes external interrupts not working on the A33 (tested with an i2c touchscreen controller which uses an external interrupt). Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Merge tag 'gpio-v4.6-1' of ↵Linus Torvalds2016-03-181-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for kernel v4.6. There is quite a lot of interesting stuff going on. The patches to other subsystems and arch-wide are ACKed as far as possible, though I consider things like per-arch <asm/gpio.h> as essentially a part of the GPIO subsystem so it should not be needed. Core changes: - The gpio_chip is now a *real device*. Until now the gpio chips were just piggybacking the parent device or (gasp) floating in space outside of the device model. We now finally make GPIO chips devices. The gpio_chip will create a gpio_device which contains a struct device, and this gpio_device struct is kept private. Anything that needs to be kept private from the rest of the kernel will gradually be moved over to the gpio_device. - As a result of making the gpio_device a real device, we have added resource management, so devm_gpiochip_add_data() will cut down on overhead and reduce code lines. A huge slew of patches convert almost all drivers in the subsystem to use this. - Building on making the GPIO a real device, we add the first step of a new userspace ABI: the GPIO character device. We take small steps here, so we first add a pure *information* ABI and the tool "lsgpio" that will list all GPIO devices on the system and all lines on these devices. We can now discover GPIOs properly from userspace. We still have not come up with a way to actually *use* GPIOs from userspace. - To encourage people to use the character device for the future, we have it always-enabled when using GPIO. The old sysfs ABI is still opt-in (and can be used in parallel), but is marked as deprecated. We will keep it around for the foreseeable future, but it will not be extended to cover ever more use cases. Cleanup: - Bjorn Helgaas removed a whole slew of per-architecture <asm/gpio.h> includes. This dates back to when GPIO was an opt-in feature and no shared library even existed: just a header file with proper prototypes was provided and all semantics were up to the arch to implement. These patches make the GPIO chip even more a proper device and cleans out leftovers of the old in-kernel API here and there. Still some cruft is left but it's very little now. - There is still some clamping of return values for .get() going on, but we now return sane values in the vast majority of drivers and the errorpath is sanitized. Some patches for powerpc, blackfin and unicore still drop in. - We continue to switch the ARM, MIPS, blackfin, m68k local GPIO implementations to use gpiochip_add_data() and cut down on code lines. - MPC8xxx is converted to use the generic GPIO helpers. - ATH79 is converted to use the generic GPIO helpers. New drivers: - WinSystems WS16C48 - Acces 104-DIO-48E - F81866 (a F7188x variant) - Qoric (a MPC8xxx variant) - TS-4800 - SPI serializers (pisosr): simple 74xx shift registers connected to SPI to obtain a dirt-cheap output-only GPIO expander. - Texas Instruments TPIC2810 - Texas Instruments TPS65218 - Texas Instruments TPS65912 - X-Gene (ARM64) standby GPIO controller" * tag 'gpio-v4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (194 commits) Revert "Share upstreaming patches" gpio: mcp23s08: Fix clearing of interrupt. gpiolib: Fix comment referring to gpio_*() in gpiod_*() gpio: pca953x: Fix pca953x_gpio_set_multiple() on 64-bit gpio: xgene: Fix kconfig for standby GIPO contoller gpio: Add generic serializer DT binding gpio: uapi: use 0xB4 as ioctl() major gpio: tps65912: fix bad merge Revert "gpio: lp3943: Drop pin_used and lp3943_gpio_request/lp3943_gpio_free" gpio: omap: drop dev field from gpio_bank structure gpio: mpc8xxx: Slightly update the code for better readability gpio: mpc8xxx: Remove *read_reg and *write_reg from struct mpc8xxx_gpio_chip gpio: mpc8xxx: Fixup setting gpio direction output gpio: mcp23s08: Add support for mcp23s18 dt-bindings: gpio: altera: Fix altr,interrupt-type property gpio: add driver for MEN 16Z127 GPIO controller gpio: lp3943: Drop pin_used and lp3943_gpio_request/lp3943_gpio_free gpio: timberdale: Switch to devm_ioremap_resource() gpio: ts4800: Add IMX51 dependency gpiolib: rewrite gpiodev_add_to_list ...
| * gpio/pinctrl: sunxi: stop poking around in private varsLinus Walleij2016-02-111-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This kind of hacks disturbs the refactoring of the gpiolib. The descriptor table belongs to the gpiolib, if we want to know something about something in it, use or define the proper accessor functions. Let's add this gpiochip_lins_is_irq() to do what the sunxi driver is trying at so we can privatize the descriptors properly. Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | pinctrl: sunxi: does not need module.hPaul Gortmaker2016-03-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | This file is not modular, nor is it using modular functions. The only thing close is the global THIS_MODULE which comes from export.h so lets replace it appropriately and cut back on the amount of header stuff we draw in by several thousand lines. Cc: linux-gpio@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | pinctrl: sunxi: Use pin number when calling sunxi_pmx_setKrzysztof Adamski2016-02-111-2/+3
|/ | | | | | | | | | | | | | | | sunxi_pmx_set accepts pin number and then calculates offset by subtracting pin_base from it. sunxi_pinctrl_gpio_get, on the other hand, gets offset so we have to convert it to pin number so we won't get negative value in sunxi_pmx_set. This was only used on A10 so far, where there is only one GPIO chip with pin_base set to 0 so it didn't matter. However H3 also requires this workaround but have two pinmux sections, triggering problem for PL port. Signed-off-by: Krzysztof Adamski <k@japko.eu> Acked-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: sunxi: use gpiochip data pointerLinus Walleij2016-01-051-5/+5
| | | | | | | | | | This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: sunxi: Be sure to clamp return valueLinus Walleij2015-12-261-1/+1
| | | | | | | | | | | As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: change member .dev to .parentLinus Walleij2015-11-191-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Merge tag 'gpio-v4.4-1' of ↵Linus Torvalds2015-11-021-12/+2Star
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "Here is the bulk of GPIO changes for the v4.4 development cycle. The only changes hitting outside drivers/gpio are in the pin control subsystem and these seem to have settled nicely in linux-next. Development mistakes and catfights are nicely documented in the reverts as you can see. The outcome of the ABI fight is that we're working on a chardev ABI for GPIO now, where hope to show results for the v4.5 kernel. Summary of changes: GPIO core: - Define and handle flags for open drain/open collector and open source/open emitter, also know as "single-ended" configurations. - Generic request/free operations that handle calling out to the (optional) pin control backend. - Some refactoring related to an ABI change that did not happen, yet provide useful. - Added a real-time compliance checklist. Many GPIO chips have irqchips, and need to think this over with the RT patches going upstream. - Restructure, fix and clean up Kconfig menus a bit. New drivers: - New driver for AMD Promony. - New driver for ACCES 104-IDIO-16, a port-mapped I/O card, ISA-style. Very retro. Subdriver changes: - OMAP changes to handle real time requirements. - Handle trigger types for edge and level IRQs on PL061 properly. As this hardware is very common it needs to set a proper example for others to follow. - Some container_of() cleanups. - Delete the unused MSM driver in favor of the driver that is embedded inside the pin control driver. - Cleanup of the ath79 GPIO driver used by many, many OpenWRT router targets. - A consolidated IT87xx driver replacing the earlier very specific IT8761e driver. - Handle the TI TCA9539 in the PCA953x driver. Also handle ACPI devices in this subdriver. - Drop xilinx arch dependencies as these FPGAs seem to profilate over a few different architectures. MIPS and ARM come to mind" * tag 'gpio-v4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (57 commits) gpio: fix up SPI submenu gpio: drop surplus I2C dependencies gpio: drop surplus X86 dependencies gpio: dt-bindings: document the official use of "ngpios" gpio: MAINTAINERS: Add an entry for the ATH79 GPIO driver gpio / ACPI: Allow shared GPIO event to be read via operation region gpio: group port-mapped I/O drivers in a menu gpio: Add ACCES 104-IDIO-16 driver maintainer entry gpio: zynq: Document interrupt-controller DT binding gpio: xilinx: Drop architecture dependencies gpio: generic: Revert to old error handling in bgpio_map gpio: add a real time compliance notes Revert "gpio: add a real time compliance checklist" gpio: Add GPIO support for the ACCES 104-IDIO-16 gpio: driver for AMD Promontory gpio: xlp: Convert to use gpiolib irqchip helpers gpio: add a real time compliance checklist gpio/xilinx: enable for MIPS gpiolib: Add and use OF_GPIO_SINGLE_ENDED flag gpiolib: Split GPIO flags parsing and GPIO configuration ...
| * pinctrl: replace trivial implementations of gpio_chip request/freeJonas Gorski2015-10-161-12/+2Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace all trivial request/free callbacks that do nothing but call into pinctrl code with the generic versions. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Eric Anholt <eric@anholt.net> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Andrew Bresticker <abrestic@chromium.org> Acked-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Lee Jones <lee@kernel.org> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | pinctrl: sunxi: Fix irq_of_xlate for the r_pio pinctrl blockHans de Goede2015-10-231-3/+3
| | | | | | | | | | | | | | | | | | | | The r_pio gpio / pin controller has a pin_base of non 0, we need to adjust for this before calling sunxi_pinctrl_desc_find_function_by_pin. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | pinctrl: sunxi: Remove unneeded semicolonJavier Martinez Canillas2015-10-021-1/+1
|/ | | | | | | | It's not needed an is just creating a null statement, so remove it. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* genirq: Remove irq argument from irq flow handlersThomas Gleixner2015-09-161-1/+1
| | | | | | | | | | | | | | Most interrupt flow handlers do not use the irq argument. Those few which use it can retrieve the irq number from the irq descriptor. Remove the argument. Search and replace was done with coccinelle and some extra helper scripts around it. Thanks to Julia for her help! Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com>
* pinctrl: sunxi: Use irq_set_chip_handler_name_locked()Thomas Gleixner2015-09-161-6/+4Star
| | | | | | | | | __irq_set_chip_handler_name_locked() is about to be replaced. Use irq_set_chip_handler_name_locked() instead. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org
* pinctrl: sunxi: Add custom irq_domain_opsMaxime Ripard2015-07-271-2/+33
| | | | | | | | | | | | | | | | | | | The current interrupt parsing code was working by accident, because the default was actually parsing the first node of interrupts. While that was mostly working (and the flags were actually ignored), this binding has never been documented, and doesn't work with SoCs that have multiple interrupt banks anyway. Add a proper interrupt xlate function, that uses the same description than the GPIOs (<bank> <pin> <flags>), that will make things less confusing. The EINT number will still be used as the hwirq number, but won't be exposed through the DT. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: sunxi: Add irq_chip nameMaxime Ripard2015-07-271-0/+2
| | | | | | | | In order to ease the debugging, add a name to the irq_chips. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: sunxi: Use common functions to change irq_chip and handlerMaxime Ripard2015-07-271-9/+9
| | | | | | | | | The current code uses some custom variable affectations, while we have common functions to do exactly that. Move to the common functions. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl/sunxi: Prepare sunxi_pinctrl_irq_handler for irq argument removalThomas Gleixner2015-07-171-1/+2
| | | | | | | | | | | | | | | The irq argument of most interrupt flow handlers is unused or merily used instead of a local variable. The handlers which need the irq argument can retrieve the irq number from the irq descriptor. Search and update was done with coccinelle and the invaluable help of Julia Lawall. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org
* pinctrl: Use irq_desc_get_xxx() to avoid redundant lookup of irq_descJiang Liu2015-07-171-2/+2
| | | | | | | | | | Use irq_desc_get_xxx() to avoid redundant lookup of irq_desc while we already have a pointer to corresponding irq_desc. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds2015-07-021-3/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "This contains: - a series of fixes for interrupt drivers to prevent a potential race when installing a chained interrupt handler - a fix for cpumask pointer misuse - a fix for using the wrong interrupt number from struct irq_data - removal of unused code and outdated comments - a few new helper functions which allow us to cleanup the interrupt handling code further in 4.3 I decided against doing the cleanup at the end of this merge window and rather do the preparatory steps for 4.3, so we can run the final ABI change at the end of the 4.3 merge window with less risk" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits) ARM/LPC32xx: Use irq not hwirq for __irq_set_handler_locked() genirq: Implement irq_set_handler_locked()/irq_set_chip_handler_name_locked() genirq: Introduce helper irq_desc_get_irq() genirq: Remove irq_node() genirq: Clean up outdated comments related to include/linux/irqdesc.h mn10300: Fix incorrect use of irq_data->affinity MIPS/ralink: Fix race in installing chained IRQ handler MIPS/pci: Fix race in installing chained IRQ handler MIPS/ath25: Fix race in installing chained IRQ handler MIPS/ath25: Fix race in installing chained IRQ handler m68k/psc: Fix race in installing chained IRQ handler avr32/at32ap: Fix race in installing chained IRQ handler sh/intc: Fix race in installing chained IRQ handler sh/intc: Fix potential race in installing chained IRQ handler pinctrl/sun4i: Fix race in installing chained IRQ handler pinctrl/samsung: Fix race in installing chained IRQ handler pinctrl/samsung: Fix race in installing chained IRQ handler pinctrl/exynos: Fix race in installing chained IRQ handler pinctrl/st: Fix race in installing chained IRQ handler pinctrl/adi2: Fix race in installing chained IRQ handler ...
| * pinctrl/sun4i: Fix race in installing chained IRQ handlerThomas Gleixner2015-06-251-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix a race where a pending interrupt could be received and the handler called before the handler's data has been setup, by converting to irq_set_chained_handler_and_data(). Search and conversion was done with coccinelle: @@ expression E1, E2, E3; @@ ( -if (irq_set_chained_handler(E1, E3) != 0) - BUG(); | -irq_set_chained_handler(E1, E3); ) -irq_set_handler_data(E1, E2); +irq_set_chained_handler_and_data(E1, E3, E2); @@ expression E1, E2, E3; @@ ( -if (irq_set_chained_handler(E1, E3) != 0) - BUG(); ... | -irq_set_chained_handler(E1, E3); ... ) -irq_set_handler_data(E1, E2); +irq_set_chained_handler_and_data(E1, E3, E2); Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Fan Wu <fwu@marvell.com> Cc: abdoulaye berthe <berthe.ab@gmail.com> Cc: Alexandre Courbot <acourbot@nvidia.com> Cc: linux-gpio@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org
* | pinctrl: make pinctrl_register() return proper error codeMasahiro Yamada2015-06-101-2/+2
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, pinctrl_register() just returns NULL on error, so the callers can not know the exact reason of the failure. Some of the pinctrl drivers return -EINVAL, some -ENODEV, and some -ENOMEM on error of pinctrl_register(), although the error code might be different from the real cause of the error. This commit reworks pinctrl_register() to return the appropriate error code and modifies all of the pinctrl drivers to use IS_ERR() for the error checking and PTR_ERR() for getting the error code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Lee Jones <lee@kernel.org> Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Ray Jui <rjui@broadcom.com> Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Hongzhou Yang <hongzhou.yang@mediatek.com> Acked-by: Wei Chen <Wei.Chen@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: sun4i: GPIOs configured as irq must be set to input before readingHans de Goede2015-03-181-2/+12
| | | | | | | | | | | | | | | | | On sun4i-a10, when GPIOs are configured as external interrupt the value for them in the data register does not seem to get updated, so set their mux to input (and restore afterwards) when reading the pin. Missed edges seem to be buffered, so this does not introduce a race condition. I've also tested this on sun5i-a13 and sun7i-a20 and those do not seem to be affected, the input value representation in the data register does seem to correctly get updated to the actual pin value while in irq mode there. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: rename gpio_lock_as_irq to gpiochip_lock_as_irqAlexandre Courbot2014-10-281-3/+3
| | | | | | | | | This function actually operates on a gpio_chip, so its prefix should reflect that fact for consistency with other functions defined in gpio/driver.h. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: clean up after enable refactoringLinus Walleij2014-09-041-4/+4
| | | | | | | | | | | | | | | | | commit 2243a87d90b42eb38bc281957df3e57c712b5e56 "pinctrl: avoid duplicated calling enable_pinmux_setting for a pin" removed the .disable callback from the struct pinmux_ops, making the .enable() callback the only remaining callback. However .enable() is a bad name as it seems to imply that a muxing can also be disabled. Rename the callback to .set_mux() and also take this opportunity to clean out any remaining mentions of .disable() from the documentation. Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Acked-by: Fan Wu <fwu@marvell.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Merge tag 'pinctrl-v3.17-1' of ↵Linus Torvalds2014-08-081-49/+138
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pinctrl updates from Linus Walleij: "This is the bulk pin control changes for the v3.17 merge development cycle: - get rid of the .disable() callback from the driver callback vtable. This callback was abused and counterintuitive since a pin or group of pins can be said to always be in some setting, and never really disabled. We now only enable a certain muxing, and move between some certain muxings, we never "disable" a mux setting - some janitorial moving the MSM, Samsung and Nomadik and drivers to their own subdirectories for a clearer view in the subsystem. This will continue - kill off the use of the return value from gpiochip_remove(), this will be done in parallel in the GPIO subsystem and hopefully not trigger too many unchecked return value warnings before we get rid of this altogether - a huge set of changes and improvements to the Allwinner sunxi drivers especially for their latest A23 and A31 SoCs, and some ground work for the new sun8i platform family - a large set of Rockchip driver improvements adding support for the RK3288 SoC - advances in migration of older Freescale platforms to pin control, especially i.MX1 - Samsung and Exynos improvements - support for the Qualcomm MSM8960 SoC - use the gpiolib irqchip helpers for the ST SPEAr and Intel Baytrail drivers - a bunch of nice janitorial work done with cppcheck" * tag 'pinctrl-v3.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (61 commits) pinctrl: baytrail: Convert to use gpiolib irqchip pinctrl: sunxi: number gpio ranges starting from 0 pinctrl: sunxi: use gpiolib API to mark a GPIO used as an IRQ pinctrl: rockchip: add drive-strength control for rk3288 pinctrl: rockchip: add separate type for rk3288 pinctrl: rockchip: set is_generic in pinconf_ops pinctrl: msm: drop negativity check on unsigned value pinctrl: remove all usage of gpio_remove ret val in driver/pinctl pinctrl: qcom: Make muxing of gpio function explicit pinctrl: nomadik: move all Nomadik drivers to subdir pinctrl: samsung: Group all drivers in a sub-dir sh-pfc: sh73a0: Introduce the use of devm_regulator_register sh-pfc: Add renesas,pfc-r8a7791 to binding documentation pinctrl: msm: move all qualcomm drivers to subdir pinctrl: msm: Add msm8960 definitions pinctrl: samsung: Allow pin value to be initialized using pinfunc pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes pinctrl: exynos: Consolidate irq_chips of GPIO and WKUP EINTs pinctrl: samsung: Handle GPIO request and free using pinctrl helpers pinctrl: samsung: Decouple direction setting from pinctrl ...
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-09 15:43:12 +0200