summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/lpfc/lpfc_mbox.c
Commit message (Collapse)AuthorAgeFilesLines
* [SCSI] lpfc 8.3.25: Adapter Interface fixes and changesJames Smart2011-07-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | Adapter Interface fixes and changes - Modify the macro field from lpfc_init_vpi_vpi to lpfc_init_vfi_vpi - Add the new CQE_CODE_RECEIVE_V1 CQE Code, add code in the driver to handle the new Code the same as the CQE_CODE_RECEIVE code except that there are two new checks for this code that will cause the driver to use the new V1 macros for rq_id and fcf_id. - Fix a bug in lpfc_prep_seq() where the size out of the first CQE was ONLY being used, even though multiple dmabufs make up the sequence, each have their own CQE with potentially different sizes. - Fix bug in lpfc_bsg_ct_unsol_event() where the ulpContext and ulpWord[3] fields of the XMIT_SEQUENCE64_CX IOCB were being calculated incorrectly. - Do physical to logical translation before indexing into the active XRI array. - Populate physical vpi in the iocb data structure. - Put the current accumulated total in each IOCB in the chain as we are walking thru then. The last IOCB in the chain should have the total length of the sequence. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] lpfc 8.3.24: Add resource extent supportJames Smart2011-05-271-35/+131
| | | | | | | | | | This patch adds support for hardware that returns resource ids via extents rather than contiguous ranges. [jejb: checkpatch.pl fixes] Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <jbottomley@parallels.com>
* [SCSI] lpfc 8.3.23: Miscellaneous fixesJames Smart2011-05-011-1/+1
| | | | | | | | | | | | | | | | | | | | Miscellaneous fixes - Do not limit RPI Count to a minimum of 64 - Fix FCFI incorrect on received unsolicited frames. - Save the FCFI returned in the REG_FCFI mailbox command if it was successful. - Fixed Vports not sending FDISC after lips. - Align based on the SLI4_PAGE_SIZE. - Fixed double byte swap on received RRQ. - Fixed mask size for the wq_id mask from 0x7F to 0x7FFF. - Clear FC_FABRIC flag when NPIV LOGO completes (and add a log message). - Modified driver to skip round robin only when ulpStatus==LOCAL_REJECT and word4=SEQUENCE_TIMEOUT to prevent FLOGI to disconnected FCF. - Don't add rport if driver unloading Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* Fix common misspellingsLucas De Marchi2011-03-311-1/+1
| | | | | | Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
* [SCSI] lpfc 8.3.21: Initialization and user interface changesJames Smart2011-02-181-1/+2
| | | | | | | | | | | | - Make link speed not supported by port message an error message. - Add support for new SLI failure codes add sysfs parameter to reflect the security setting and current state. - Add all lpfc module parameters to the /sys/modules/lpfc/parameters directory. [jejb: fix up compile failure] Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.21: Critical Errors and Bug FixesJames Smart2011-02-181-8/+8
| | | | | | | | | | | | | | | | | | | Critical Errors: - Correctly handle non-zero return lpfc_workq_post_event and return ENOMEM - Save the irq level when locking the host_lock in lpfc_findnode_did Bug Fixes: - Adjust payload_length and request_length for sli4_config mailbox commands. - Add the freed sgl/XRI to the tail of the list rather than to the head. - Set the FC_VPORT_NEEDS_INIT_VPI on vport deletes and check it before issuing a fdisc on an els retry. - Only call lpfc_hba_init_link() if phba->cfg_suppress_link_up is LPFC_INITIALIZE_LINK. - Add support for SLI-4 Performance Hints Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.20: Updates to FC discovery commandsJames Smart2010-12-211-8/+4Star
| | | | | | | | | Updated commands used for ELS to utilize VPI Allocate RPI at node creation time and pass in ELS commnads. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.19: Add SLI4 FC Discovery supportJames Smart2010-12-211-22/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add SLI4 FC Discovery support - Replace READ_LA and READ_LA64 with READ_TOPOLOGY mailbox command. - Converted the old READ_LA structure to use bf_set/get instead of bit fields. - Rename HBA_FCOE_SUPPORT flag to HBA_FCOE_MODE. Flag now indicates function is running as SLI-4 FC or FCoE port. Make sure flag reset each time READ_REV completed as it can dynamically change. - Removed BDE union in the READ_TOPOLOGY mailbox command and added a define to define the ALPA MAP SIZE. Added FC Code for async events. - Added code to support new 16G link speed. - Define new set of values to keep track of valid user settable link speeds. - Used new link speed definitions to define link speed max and bitmap. - Redefined FDMI Port sppeds to be hax values and added the 16G value. - Added new CQE trailer code for FC Events. - Add lpfc_issue_init_vfi and lpfc_init_vfi_cmpl routines. - Replace many calls to the initial_flogi routine with lpfc_issue_init_vfi. - Add vp and vpi fields to the INIT_VFI mailbox command. - Addapt lpfc_hba_init_link routine for SLI4 use. - Use lpfc_hba_init_link call from lpfc_sli4_hba_setup. - Add a check for FC mode to register the FCFI before init link. - Convert lpfc_sli4_init_vpi to be called without a vpi (get it from vport). Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.18: Adapter Shutdown and Unregistration cleanupJames Smart2010-10-261-0/+28
| | | | | | | | | | | | | | | | | Adapter Shutdown and Unregistration cleanup - Correct the logic around hba shutdown. Prior to final reset, the driver must wait for all XRIs to return from the adapter. Added logic to poll, progressively slowing the poll rate as delay gets longer. - Correct behavior around the rsvd1 field in UNREG_RPI_ALL mailbox completion and final rpi cleanup. - Updated logic to move pending VPI registrations to their completion in cases where a CVL may be received while registration in progress. - Added unreg all rpi mailbox command before unreg vpi. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.16: FCoE Discovery and Failover FixesJames Smart2010-08-061-1/+7
| | | | | | | | | | | | | | | | | | | - Add support for re-reg'ing changed VPI w/o unregister VPI - Copy WWN and state from old nodelist when target DID change. - Clean up old nodelist rport and put the nodelist when target DID change. - Clear the VFI_REGISTERED flag when UNREG_VFI completes. - Made both checks of port_state against LPFC_FLOGI and LPFC_FDISC non-inclusive for ignoring CVL events. - Added logic to stop retrying of the ongoing PLOGI and FDISC if transitioned back to the FCF rediscovery state in reaction to CVL. - Removed the dependency of scanning of all the available FCF table entries for bulding round-robin bitmap. - Use the lpfc_sli4_fcf_rr_read_fcf_rec() in responding to individual New FCF found event. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.15: FCoE Related FixesJames Smart2010-07-281-1/+1
| | | | | | | | | | | | | | | FCoE Related Fixes - Correct find-next-FCF routine so that it searches at next FCF rather than current one. - Enhanced round-robin FCF failover algorithm to re-start on "New FCF" async event - Update the manner in which we look at FCFs while they may be in their discovery state. - Use LPFC_FCOE_NULL_VID macro when checkinf for valid vlan_id for FCF Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.14: SCSI and SLI API fixesJames Smart2010-07-271-0/+20
| | | | | | | | | | | | | | - Fixed accounting of allocated SCSI buffers when post sgl fails. - Restrict scsi buffer allocation based on LUN count (sdev_cnt). - Create __lpfc_sli_free_rpi that doesn't take out the hbalock. - Modify lpfc_sli_free_rpi to call __lpfc_sli_free_rpi. - Call __lpfc_sli_free_rpi in lpfc_cleanup_pending_mbox. - Do not swap the strings returned in mailbox commands and do not swap byte aligned data in VPD. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.13: Initialization code clean up and fixes.James Smart2010-07-271-1/+0Star
| | | | | | | | | | | - Add poll or wait flag parameter to hba_init_link and hba_down_link. - (From Linux Community) Make return with ENXIO negative. - Remove unused INB code from driver. - Prevent block_magmt_io from returning until mailbox is inactive. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.12: Critical fixesJames Smart2010-04-111-8/+8
| | | | | | | | | | | | - Move the code to increase the sg seg count for LP21000 adapters. - Check pcmd on command completion before dereferencing it. - Clear queue memory when creating firmware queues to prevent stale entries. - Replace the use of PAGE_SIZE in many areas that assumed it was always 4k. - Add an else clause to a conditional that needed to unlock the hba_lock. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.12: Emulex SLI enhancementsJames Smart2010-04-111-0/+2
| | | | | | | | | - Add the new Logical Link speed event support. - Add RATOV and EDTOV to the REG_VFI mailbox command. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.11: Driver management improvements via BSGJames Smart2010-04-111-19/+32
| | | | | | | | | - Add BSG support for PCI loopback testing. - Add BSG support for extended mailbox commands. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* [SCSI] lpfc 8.3.10: Added round robin FCF failoverJames Smart2010-03-031-4/+4
| | | | | | | - Added round robin FCF failover on initial or FCF rediscovery FLOGI failure. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.9: Fix locking and memory issuesJames Smart2010-02-181-1/+2
| | | | | | | | | - Use the hbalock when changing the fc_flag. - Use the host_lock when changeing the sli_flag. - Prevent NULL pointer dereference after dma_alloc_coherent failure. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.9: SLI enhancments to support new hardware.James Smart2010-02-181-0/+38
| | | | | | | | | | | - Add support for the INTF (Interface) PCI register. - Add support for greater than 2 page SGLs. - Add support for up to 32 bit BDE lengths. - Implement the Port Capabilities Mailbox command. - Stop checking the Minor Code in the EQE structure. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.9: Discovery changes to the lpfc driver.James Smart2010-02-181-5/+65
| | | | | | | | - Add init_vpi mailbox command before re-registering VPI. - Add Fast FCF failover support. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.6 : FCoE Protocol FixesJames Smart2009-12-041-0/+7
| | | | | | | | | | | FCoE Protocol fixes. - Fixed FIP frame designation for ELS commands. - Fix CVL received on Port 1 not processed by driver. - Fix Zeroed frame on wire after FLOGI - Fix vport keep-alive does not contain the correct WWN. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.5: fix fcp command polling, add FIP mode, performance ↵James Smart2009-12-041-5/+0Star
| | | | | | | | | | | | | | optimisations and devloss timout fixes This patch includes the following changes: - Fixed Panic/Hang when using polling mode for fcp commands - Added support for Read_rev mbox bits indicating FIP mode of HBA - Optimize performance of slow-path handling of els responses - Add code to cleanup orphaned unsolicited receive sequences - Fixed Devloss timeout when multiple initiators are in same zone Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.5: fix sysfs parameters, vport creation and other bugs and ↵James Smart2009-12-041-4/+7
| | | | | | | | | | | | | | | | | | | | | | | | update logging This patch include the following fixes and changes: - Fix crash when "error" is echoed to board_mode sysfs parameter - Fix FCoE Parameter parsing in regions 23 - Fix driver crash when creating vport with large number of targets on SLI4 - Fix bug with npiv message being logged when it is not supported by the adapter - Fix a potential dereferencing mailbox structure after free bug - Fix firmware crash after vport create with high target count - Error out requests to set board_mode to warm restart via sysfs on SLI4 HBAs - Fix Block guard logging - Fix a memory corruption issue during GID_FT IO prep - Fix crash while processing unsolicited FC frames - Fix failed to allocate XRI message is not a critical failure - Update and fix formatting in some log messages - Fix missing new line characters in log messages - Removed the use of the locally defined FC transport layer related macros - Check the rsplen in lpfc_handle_fcp_err function before using rsplen Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.5: fix VPI registration, error clean up and add support for ↵James Smart2009-12-041-4/+8
| | | | | | | | | | | | | | | | | | vlink events This patch includes the following fixes and new features: - Fix mask size for CT field in WQE - Fix VPI base not used when unregistering VPI on port 1. - Fix UNREG_VPI mailbox command to unreg the correct VPI - Fixed Check for aborted els command - Fix error when trying to load driver with wrong firmware on FCoE HBA. - Fix bug with probe_one routines not putting the Scsi_Host back upon error - Add support for Clear Virtual Link Async Events - Add support for unsolicited CT exchange sequence abort - Add 0x0714 OCeXXXXX PCI ID Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.4: Remove spaces before newlines in several log messagesJames Smart2009-08-231-1/+1
| | | | | | | | Remove spaces before newlines in several log messages Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.4: NPIV vport fixesJames Smart2009-08-231-11/+36
| | | | | | | | | | | | NPIV vport fixes - Fixed static vport creation on SLI4 HBAs - Fixed vport create sending init_vpi before REG_VFI - Fix unable to create vports on SLI4 HBA's Port2 Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.4: Consistently Implement persistent port disableJames Smart2009-08-231-10/+26
| | | | | | | | | | | | Consistently implement persistent port disable. Ability was to be managed in the adapter via firmware via flash settings. However, not all firmware images supported it. Uniformly support it everywhere. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.4: Various SLI4 fixesJames Smart2009-08-231-5/+3Star
| | | | | | | | | | | | | | | | | | Various SLI4 fixes - Fix switch name not used in the FCF record for FCoE HBAs - Enabled HBA UE error polling error-condition action code - Rewrite lpfc_sli4_scmd_to_wqidx_distr() to handle counter rollover cleanly - Modify resume_rpi mailbox data structure to match current SLI4 spec - Do not issue mailbox command in MBX_POLL mode when LPFC_HBA_ERROR is set - Wait for HBA POST completion before checking Online and UE registers - Fix accumulated total length not being filled in on unsolicited IOCBs - Use PCI config space register to determine SLI rev of HBA - Turn on starting ELS tmo function timer during device initialization Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.3 : Fix a couple of spin_lock and memory issues and a crashJames Smart2009-06-151-0/+1
| | | | | | | | | | | | Contains the following changes: - Fixed error paths retaking a spin lock which they already hold - Added code to free memory in a couple of error paths - Added code to free RPI bit map while unloading driver - Added code to write zero to memory object allocated through dma_alloc_coherent - Fixed crash/hang with target or LUN resets Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] lpfc 8.3.3 : FC/FCOE discovery fixesJames Smart2009-06-151-2/+4
| | | | | | | | | | | | | | Contains the following changes: - Force vport to send LOGO to fabric controller when deleting vport - Fixed driver failing to register login when a PLOGI is received - Fixes for FIP discovery - Added stricter checks for FCF addressing mode - Added code to send only FLOGI, FDISC and LOGO to Fabric controller as FIP - Fixed handling of LOGO from Fabric port - Fixed consecutive link up events skipped link_down processing Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] lpfc 8.3.2 : Persistent Vport SupportJames Smart2009-06-081-0/+38
| | | | | | | | | | | | Add support for persistent vport definitions at creation at boot time Also includes a few misc fixes for: - conversion to vpi name from vport slang name - couple of small mailbox references - some additional discovery mods Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] lpfc 8.3.2 : Update of copyrightsJames Smart2009-06-081-1/+1
| | | | | | | Update of copyrights on modified files Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] lpfc 8.3.2 : Addition of SLI4 Interface - Mailbox handlingJames Smart2009-06-081-42/+590
| | | | | | | | | The mailbox commands themselves are the same, or very similar to their SLI3 counterparts. This patch genericizes mailbox command handling and adds support for the new SLI4 mailbox queue. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] lpfc 8.3.2 : Addition of SLI4 Interface - Base SupportJames Smart2009-06-081-0/+2
| | | | | | | | | | | Adds new hardware and interface definitions. Adds new interface routines - utilizing the reorganized layout of the driver. Adds SLI-4 specific functions for attachment, initialization, teardown, etc. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] lpfc 8.3.1 : Fix up kernel-doc function commentsJames Smart2009-04-271-31/+32
| | | | | Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] lpfc 8.3.0 : Add BlockGuard support (T10-DIF) codeJames Smart2008-12-291-0/+2
| | | | | | | | Add SCSI data path, error handling, and debugfs code to complete BlockGuard support. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] lpfc 8.3.0 : Add active interrupt test for enabling MSI/MSI-X/INTxJames Smart2008-12-291-2/+4
| | | | | | | | | | | | | | | Per the recent discussions at the Linux Plumbers Conference, when enabling MSI or MSI-X, generate a test interrupt to verify the interrupt routing is working properly. If the test interrupt fails, fall back to MSI first, and if that fails as well, to INTx. If the interrupt test fails with INTx, log an error and fail the PCI probe. Also changed the use of spin_(lock|unlock) to the _irq(save|restore) variants in the interrupt handlers because with multi-message MSI-X, both interrupt handlers can now run in parallel. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] lpfc 8.3.0 : Fix issue with assumed Interrupt Enable Block supportJames Smart2008-12-291-8/+3Star
| | | | | | | | | | The phba hbq_get address was setup before the HBA reported support for Interrupt Enable Block (INB). This caused loopback tests to fail after all HBQs had been used once. Moved setting of hba_get until after config port mailbox command completes. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] lpfc 8.3.0 : Added 3 small features and improve PCI EEH supportJames Smart2008-12-291-0/+35
| | | | | | | | | | | | | | | - Added FC_REG_VPORTRSCN_EVENT to lpfc_nl.h - Added code to provide option ROM version from HBA and via sysfs - Added support for HPS bit in config port mailbox command to tell HBA that host group pointers are in host memory. - Bugfix for Extended Error Handling (EEH) support on IBM PowerPC P6 platform with MSI enabled Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] lpfc 8.2.8 v2 : Add statistical reporting control and additional fc ↵James Smart2008-10-131-0/+1
| | | | | | | | | | | | | vendor events Added support for new sysfs attributes: lpfc_stat_data_ctrl and lpfc_max_scsicmpl_time. The attributes control statistical reporting of io load. Added support for new fc vendor events for error reporting. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] lpfc 8.2.8 : Add MSI-X supportJames Smart2008-10-131-1/+79
| | | | | | | | Add support for MSI-X Multi-Message interrupts. We use different vectors for fast-path interrupts (i/o) and slow-patch interrupts (discovery, etc). Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] lpfc 8.2.8 : Update driver for new SLI-3 featuresJames Smart2008-10-131-37/+38
| | | | | | | | | | Update driver for new SLI-3 features: - interrupt enhancements - lose adapter doorbell writes - inlining support for FCP_Ixx cmds Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] lpfc 8.2.8 : Add kernel-doc function headersJames Smart2008-10-131-66/+402
| | | | | Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* drivers/scsi/: Spelling fixesJoe Perches2008-02-031-1/+1
| | | | | | | | | | Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Acked-by: James Smart <james.smart@emulex.com> Acked-by: Darrick J. Wong <djwong@us.ibm.com> Acked-by: David Somayajulu <david.somayajulu@qlogic.com> Acked-by: Mark Salyzyn <mark_salyzyn@adaptec.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
* [SCSI] lpfc 8.2.4 : Miscellaneous FixesJames Smart2008-01-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Miscellaneous Fixes: - Fix a couple of sparse complaints - Reset the FCP recovery flag when the node is not a FCP2 device. - Speed up offline prep delays - Fixed a memory leak in lpfc_mem_alloc failure path - Fixed external loopback test. - Fixed error code returned from the driver when HBA is over heated. - Correct Max NPIV vport to limits read from adapter - Add missing locks around fc_flag and FC_NEEDS_REG_VPI - Add missing hba ids for device identification - Added support for SET_VARIABLE and MBX_WRITE_WWN mailbox commands - Changed all temperature event messages from warning to error - Fix reporting of link speed when link is down - Added support for MBX_WRITE_WWN mailbox command - Change del_timer_sync() in ISR to del_timer() in interrupt handler - Correct instances of beXX_to_cpu() that should be cpu_to_beXX() - Perform target flush before releasing node references on module unload - Avoid bogus devloss_tmo messages when driver unloads - Fix panic when HBA generates ERATT interupt - Fix mbox race condition and a workaround on back-to-back mailbox commands - Force NPIV off for pt2pt mode between 2 NPorts - Stop worker thread before removing fc_host. - Fix up discovery timeout error case due to missing clear_la - Tighten mailbox polling code to speed up detection of fast completions - Only allow DUMP_MEMORY if adapter offline due to overtemp errors - Added extended error information to the log messages in chip init. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] lpfc 8.2.3 : Miscellaneous Small Fixes - part 1James Smart2008-01-121-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | Miscellaneous Small Fixes - part 1 - Fix typo kmzlloc -> kzalloc - Fix discovery ndlp use after free panic - Fix link event causing flood of 0108 messages - Relieve some mbox congestion on link up with 100 vports - Fix broken vport parameters - Prevent lock recursion in logo_reglogin_issue - Split uses of error variable in lpfc_pci_probe_one into retval and error - Remove completion code related to dev_loss_tmo - Remove unused LPFC_MAX_HBQ #define - Don't compare pointers to 0 for sparse - Make 2 functions static for sparse - Fix default rpi cleanup code causing rogue ndlps to remain on the NPR list - Remove annoying ELS messages when driver is unloaded - Fix Cannot issue Register Fabric login problems on link up - Remove LPFC_EVT_DEV_LOSS_DELAY - Fix FC port swap test leads to device going offline - Fix vport CT flags to only be set when accepted - Add code to handle signals during vport_create - Fix too many retries in FC-AL mode - Pull lpfc_port_link_failure out of lpfc_linkdown_port Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] lpfc 8.2.3 : Added support for ASICs that report temperatureJames Smart2008-01-121-0/+18
| | | | | | | | Added support for ASICs that report temperature. Temperature notices are reported as events and logged. Temperature can be read via sysfs. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] lpfc 8.2.2 : Miscellaneous Bug FixesJames Smart2007-08-011-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | - Fix vport ndlp ref counting errors - Fix use after free of ndlp structure - Use the correct flag to check for LOADING setting. - Fix driver unload bugs (related to shost references) after link down or rscn - Fix up HBQ initialization - Fix port_list locking around driver unload. - Fix references to hostdata as a phba - Fix GFFID type offset to work correctly with big endian structure. - Only call pci_disable_msi if the pci_enable_msi succeeded - Fix vport_delete wait/fail if in discovery - Put a reference on the nameservers ndlp when performing CT traffic. - Remove unbalanced hba unlock. - Fix up HBQ processing - Fix lpfc debugfs discovery trace output for ELS rsp cmpl - Send ADISC when rpi is 0 - Stop FDISC retrying forever - Unable to retrieve correct config parameter for vport - Fix sli_validate_fcp_iocb, sli_sum_iocb, sli_abort_iocb to be vport-aware. - Fix index-out-of-range error in iocb. Spotted by Coverity. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] lpfc 8.2.2 : Miscellaneous management and logging modsJames Smart2007-08-011-1/+1
| | | | | | | | | | - Remove the "management_version" sysfs parameter (was unused) - Add HBQ information to lpfc debugfs - Change lpfc_npiv_enable name back to lpfc_enable_npiv (internal stds) - Remove "issue_lip" attribute from the vports transport template Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-14 23:37:32 +0200