summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/ufs
Commit message (Collapse)AuthorAgeFilesLines
* block: split out request-only flags into a new namespaceChristoph Hellwig2016-10-281-3/+3
| | | | | | | | | | | | | | | | A lot of the REQ_* flags are only used on struct requests, and only of use to the block layer and a few drivers that dig into struct request internals. This patch adds a new req_flags_t rq_flags field to struct request for them, and thus dramatically shrinks the number of common requests. It also removes the unfortunate situation where we have to fit the fields from the same enum into 32 bits for struct bio and 64 bits for struct request. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Shaun Tancheff <shaun.tancheff@seagate.com> Signed-off-by: Jens Axboe <axboe@fb.com>
* scsi: ufs: Kconfig fixJoao Pinto2016-09-301-1/+1
| | | | | | | | | | Currently if we have PCI and UFSHCD configured in the kernel, both SCSI_UFS_DWC_TC_PCI and SCSI_UFSHCD_PCI show up, which is not correct. This patch changes the UFS Kconfig to assure hierarchy between the 2 options. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs: Fix error return code in ufshcd_init()Wei Yongjun2016-09-301-0/+1
| | | | | | | | | | Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Reviewed-by: Kiwoong Kim <kwmad.kim@samsung.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs: Data Segment only needed for WRITE DESCRIPTORZang Leigang2016-09-301-3/+6
| | | | | | | | | | | | Some devices have problems handling a Query UPIU with Data Segment set. Only set it for WRITE DESCRIPTOR commands. [mkp: updated patch description] Signed-off-by: Zang Leigang <zangleigang@hisilicon.com> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Reviewed-by: Kiwoong Kim <kwmad.kim@samsung.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs: Enable no vccq quirk for skhynix deviceKyuho Choi2016-09-281-0/+2
| | | | | | | | | This patch enable no vccq quirk for SKHynix devices. SKHynix ufs device don't need vccq vrail for device operation. Signed-off-by: Kyuho Choi <kyuho.choi@sk.com> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs: Get a TM service response from the correct offsetKiwoong Kim2016-09-212-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | When any UFS host controller receives a TM(Task Management) response from a UFS device, UFS driver has been recognize like receiving a message of "Task Management Function Complete"(00h) in all cases, so far. That means there is no pending task for a tag of the TM request sent before in the UFS device. That's because the byte offset 6 in TM response which has been used to get a TM service response so far represents just whether or not a TM transmission passes. Regarding UFS spec, the correct byte offset to get TM service response is 15, not 6. I tested that UFS driver responds properly for the TM response from a UFS device with an reference board with exynos8890, as follow: No pending task -> Task Management Function Complete (00h) Pending task -> Task Management Function Succeeded (08h) [mkp: applied by hand] Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com> Signed-off-by: HeonGwang Chu <hg.chu@samsung.com> Tested-by: : Kiwoong Kim <kwmad.kim@samsung.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs: Fix a wrong string in power mode changeKiwoong Kim2016-09-091-1/+1
| | | | | | | | | I modified a string as described in UFS spec as follow: umpcrs -> upmcrs. [mkp: applied by hand] Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs: Add missing header dependencies for tc-dwc-g210Baoyou Xie2016-09-041-0/+1
| | | | | | | | | | | | We get 2 warnings when build kernel with W=1: drivers/scsi/ufs/tc-dwc-g210.c:261:5: warning: no previous prototype for 'tc_dwc_g210_config_40_bit' [-Wmissing-prototypes] drivers/scsi/ufs/tc-dwc-g210.c:293:5: warning: no previous prototype for 'tc_dwc_g210_config_20_bit' [-Wmissing-prototypes] In fact, these functions are declared in ufs/tc-dwc-g210.h, so this patch add missing header dependencies Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs: remove unnecessary goto labelTiezhu Yang2016-07-151-2/+1Star
| | | | | | | | When buff_ascii kmalloc failed, there is no need to call kfree, it should return -ENOMEM directly, this patch fixes it. Signed-off-by: Tiezhu Yang <kernelpatch@126.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs: tc-dwc-g210 driver fix for 20-bit RMMIManjunath M B2016-07-151-2/+2
| | | | | | | | | | The code was checking on PA_CONNECTEDRXLANES and PA_CONNECTEDTXLANES attributes to program the Lane#1 attributes. The correct attributes are PA_AVAILRXDATALANES and PA_AVAILTXDATALANES respectively. Signed-off-by: Manjunath M B <manjumb@synopsys.com> Tested-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* ufs: Adding license info do tc-dwc-g210 and ufshcd-dwc to enable loadable moduleJoao Pinto2016-07-132-0/+8
| | | | | | | | | This patch adds license info to the tc-dwc-g210 and ufshcd-dwc files in order for them to have access to some ufshcd symbols when all are built as modules. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* ufs: add TC G210 pci driverJoao Pinto2016-07-133-0/+190
| | | | | | | | | | This patch adds a glue pci driver for the Synopsys G210 Test Chip. [mkp: Fixed Kconfig depends and module name] Signed-off-by: Joao Pinto <jpinto@synopsys.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* ufs: add TC G210 platform driverJoao Pinto2016-07-133-0/+122
| | | | | | | | This patch adds a glue platform driver for the Synopsys G210 Test Chip. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* ufs: add support for Synopsys G210 Test ChipJoao Pinto2016-07-132-0/+334
| | | | | | | | This patch adds support for Synopsys G210 Test Chip. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* ufs: add support for DesignWare ControllerJoao Pinto2016-07-134-0/+219
| | | | | | | | | This patch has the goal to add support for DesignWare UFS Controller specific operations. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* ufs: add link status to ufshciJoao Pinto2016-07-131-0/+6
| | | | | | | | | Add link status to ufshci. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Acked-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* ufs: add unipro attributesJoao Pinto2016-07-131-0/+39
| | | | | | | | | Add unipro attributes. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Acked-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* ufs: add UFS 2.0 capabilitiesJoao Pinto2016-07-132-41/+53
| | | | | | | | | | Add UFS 2.0 support to the UFS core driver. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* ufs: fixed typo in ufshcd-pltfrmJoao Pinto2016-07-131-1/+1
| | | | | | | | | | Fixed typo in ufshcd-pltfrm. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs: select CONFIG_NLSArnd Bergmann2016-03-181-0/+1
| | | | | | | | | | | | | | | A recent change to ufshcd introduced a call to utf16s_to_utf8s, a function that is provided by the NLS module, so we get a link error when that is not present: drivers/scsi/built-in.o: In function `ufshcd_read_string_desc': :(.text+0x124d0): undefined reference to `utf16s_to_utf8s' This adds a Kconfig 'select' statement to avoid the build error. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: b573d484e4ff ("scsi: ufs: add support to read device and string descriptors") Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs-qcom: add printouts of testbus debug registersYaniv Gardi2016-03-152-0/+86
| | | | | | | | This change adds printouts of testbus and debug registers. Reviewed-by: Gilad Broner <gbroner@codeaurora.org> Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs-qcom: enable/disable the device ref clockYaniv Gardi2016-03-152-0/+21
| | | | | | | | | This change enables the device ref clock before changing to HS mode and disables it if entered to PWM mode. Reviewed-by: Gilad Broner <gbroner@codeaurora.org> Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs-qcom: set PA_Local_TX_LCC_Enable before link startupYaniv Gardi2016-03-152-7/+21
| | | | | | | | | | | | Some UFS devices (and may be host) have issues if LCC is enabled. So we are setting PA_Local_TX_LCC_Enable to 0 before link startup which will make sure that both host and device TX LCC are disabled once link startup is completed. Reviewed-by: Gilad Broner <gbroner@codeaurora.org> Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs: add device quirk delay before putting UFS rails in LPMYaniv Gardi2016-03-152-1/+23
| | | | | | | | | | | | | | | | We put the UFS device in sleep state & UFS link in hibern8 state during runtime suspend. After this we put all the UFS rails in low power modes immediately but it seems some devices may still draw more than sleep current from UFS rails (especially from VCCQ rail) at-least for 500us. To avoid this situation, this change adds 2ms delay before putting these UFS rails in LPM mode. Reviewed-by: Gilad Broner <gbroner@codeaurora.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs: fix leakage during link off stateYaniv Gardi2016-03-151-0/+10
| | | | | | | | | | | | | Currently when we try to put the link in off/disabled state during suspend, it seems link is not being kept in low power mode. This patch fixes the issue by putting the link in hibern8 first (so device also puts the link in low power mode) and then stop the host controller. Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs: tune UniPro parameters to optimize hibern8 exit timeYaniv Gardi2016-03-154-0/+142
| | | | | | | | | | | | | | | Optimal values of local UniPro parameters like PA_Hibern8Time & PA_TActivate can help reduce the hibern8 exit latency. If both host and device supports UniPro ver1.6 or later, these parameters will be automatically tuned during link startup itself. But if either host or device doesn't support UniPro ver 1.6 or later, we have to manually tune them. But to keep manual tuning logic simple, we will only do manual tuning if local unipro version doesn't support ver1.6 or later. Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs: handle non spec compliant bkops behaviour by deviceYaniv Gardi2016-03-152-7/+52
| | | | | | | | | | | | We are seeing that some devices are raising the urgent bkops exception events even when BKOPS status doesn't indicate performace impacted or critical. Handle these device by determining their urgent bkops status at runtime. Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs: add retry for query descriptorsYaniv Gardi2016-03-151-18/+37
| | | | | | | | | | | Query commands have 100ms timeout and it may timeout if they are issued in parallel to ongoing read/write SCSI commands, this change adds the retry (max: 10) in case command timeouts. Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs: add error recovery after DL NAC errorYaniv Gardi2016-03-152-0/+95
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some vendor's UFS device sends back to back NACs for the DL data frames causing the host controller to raise the DFES error status. Sometimes such UFS devices send back to back NAC without waiting for new retransmitted DL frame from the host and in such cases it might be possible the Host UniPro goes into bad state without raising the DFES error interrupt. If this happens then all the pending commands would timeout only after respective SW command (which is generally too large). This change workarounds such device behaviour like this: - As soon as SW sees the DL NAC error, it would schedule the error handler - Error handler would sleep for 50ms to see if there any fatal errors raised by UFS controller. - If there are fatal errors then SW does normal error recovery. - If there are no fatal errors then SW sends the NOP command to device to check if link is alive. - If NOP command times out, SW does normal error recovery - If NOP command succeed, skip the error handling. If DL NAC error is seen multiple times with some vendor's UFS devices then enable this quirk to initiate quick error recovery and also silence related error logs to reduce spamming of kernel logs. Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs: make error handling bit fasterYaniv Gardi2016-03-151-43/+112
| | | | | | | | | | | | | | | | UFS driver's error handler forcefully tries to clear all the pending requests. For each pending request in the queue, it waits 1 sec for it to get cleared. If we have multiple requests in the queue then it's possible that we might end up waiting for those many seconds before resetting the host. But note that resetting host would any way clear all the pending requests from the hardware. Hence this change skips the forceful clear of the pending requests if we are anyway going to reset the host (for fatal errors). Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs: disable vccq if it's not needed by UFS deviceYaniv Gardi2016-03-152-4/+57
| | | | | | | | | | | Some UFS devices don't require VCCQ rail for device operations hence this change adds support to recognize such devices and remove vote for the unused VCCQ rail. Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs: separate device and host quirksYaniv Gardi2016-03-154-0/+244
| | | | | | | | | | | | | Currently we use the host quirks mechanism in order to handle both device and host controller quirks. In order to support various of UFS devices we should separate handling the device quirks from the host controller's. Reviewed-by: Gilad Broner <gbroner@codeaurora.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Raviv Shvili <rshvili@codeaurora.org> Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs: add support to read device and string descriptorsYaniv Gardi2016-03-153-1/+95
| | | | | | | | | | | This change adds support to read device descriptor and string descriptor from a UFS device Reviewed-by: Gilad Broner <gbroner@codeaurora.org> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Raviv Shvili <rshvili@codeaurora.org> Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs: verify hba controller hce reg valueYaniv Gardi2016-03-152-30/+35
| | | | | | | | | | | | | | | | Sometimes due to hw issues it takes some time to the host controller register to update. In order to verify the register has updated, a polling is done until its value is set. In addition the functions ufshcd_hba_stop() and ufshcd_wait_for_register() was updated with an additional input parameter, indicating the timeout between reads will be done by sleeping or spinning the cpu. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Raviv Shvili <rshvili@codeaurora.org> Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs: implement scsi host timeout handlerYaniv Gardi2016-03-151-0/+36
| | | | | | | | | | | | | | | | | | | | | | A race condition exists between request requeueing and scsi layer error handling: When UFS driver queuecommand returns a busy status for a request, it will be requeued and its tag will be freed and set to -1. At the same time it is possible that the request will timeout and scsi layer will start error handling for it. The scsi layer reuses the request and its tag to send error related commands to the device, however its tag is no longer valid. As this request was never really sent to the device, there is no point to start error handling with the device. Implement the scsi error handling timeout callback and bypass SCSI error handling for request that were not actually sent to the device. For such requests simply reset the block layer timer. Otherwise, let SCSI layer perform the usual error handling. Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Gilad Broner <gbroner@codeaurora.org> Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs: avoid spurious UFS host controller interruptsYaniv Gardi2016-03-151-0/+15
| | | | | | | | | | | | | | When control reaches to Linux UFS driver during UFS boot mode, UFS host controller interrupt status/enable registers may have left over settings. In order to avoid any spurious interrupts due to these left overs, it's important to clear these interrupt status/enable registers before enabling UFS interrupt handling. Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs-qcom: add number of lanes per directionYaniv Gardi2016-03-154-17/+44
| | | | | | | | | | | | | Different platform may have different number of lanes for the UFS link. Add parameter to device tree specifying how many lanes should be configured for the UFS link. Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Gilad Broner <gbroner@codeaurora.org> Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs: fix typo in commentTomas Winkler2016-02-241-1/+1
| | | | | | | [mkp: Only one typo remained] Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* ufs: fix typo: MAZ to MAXTomas Winkler2016-02-242-2/+2
| | | | | | | | QUERY_DESC_GEOMETRY_MAZ_SIZE QUERY_DESC_GEOMETRY_MAX_SIZE Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs: add wrapper for retrying sending query attributeYaniv Gardi2016-02-241-7/+44
| | | | | | | | | | | | Sometimes queries from the device might return a failure so it is recommended to retry sending the query, before giving up. This change adds a wrapper to retry sending a query attribute, in cases where we need to wait longer, before we continue, or before reporting a failure. Reviewed-by: Gilad Broner <gbroner@codeaurora.org> Reviewed-by: Dolev Raviv <draviv@codeaurora.org> Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs: commit descriptors before setting the doorbellYaniv Gardi2016-02-241-0/+2
| | | | | | | | | | | | | Add a write memory barrier to make sure descriptors prepared are actually written to memory before ringing the doorbell. We have also added the write memory barrier after ringing the doorbell register so that controller sees the new request immediately. Reviewed-by: Dolev Raviv <draviv@codeaurora.org> Signed-off-by: Gilad Broner <gbroner@codeaurora.org> Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs: add missing memory barriersYaniv Gardi2016-02-241-6/+13
| | | | | | | | | | | | | | Performing several writes to UFS host controller registers has no guarantee of ordering, so we must make sure register writes to setup request list base address etc. are performed before the run/stop register is enabled. In addition, when setting up a task request, we must make sure the updating of descriptors takes places before ringing the doorbell, similarly to setting up a transfer request. Reviewed-by: Dolev Raviv <draviv@codeaurora.org> Signed-off-by: Gilad Broner <gbroner@codeaurora.org> Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs: reduce the interrupts for power mode change requestsYaniv Gardi2016-02-241-14/+27
| | | | | | | | | | | | | | | | | DME commands such as Hibern8 enter/exit and gear switch generate 2 completion interrupts, one for confirmation that command is received by local UniPro and 2nd one is the final confirmation after communication with remote UniPro. Currently both of these completions are registered as interrupt events which is not quite necessary and instead we can just wait for the interrupt of 2nd completion, this should reduce the number of interrupts and could reduce the unnecessary CPU wakeups to handle extra interrupts. Reviewed-by: Gilad Broner <gbroner@codeaurora.org> Reviewed-by: Dolev Raviv <draviv@codeaurora.org> Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs: retry failed query flag requestsYaniv Gardi2016-02-242-26/+41
| | | | | | | | | | | UFS flag query requests may fail sometimes due to timeouts etc. Add a wrapper function to retry up to 10 times in case of such failure, similar to retries being made for attribute queries. Reviewed-by: Dolev Raviv <draviv@codeaurora.org> Signed-off-by: Gilad Broner <gbroner@codeaurora.org> Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs: fix error recovery after the hibern8 exit failureYaniv Gardi2016-02-241-5/+53
| | | | | | | | | | | | | | | | | | Hibern8 exit can be called from 3 different contexts: - ufshcd_hibern8_exit_work - ufshcd_ungate_work - runtime/system resume If hibern8 exit fails for some reason then we try to bring the link to active state by link startup but this recovery mechanism results into deadlock or errors from first 2 context listed above. This change fixes the recovery by adding proper error handling mechanism. Reviewed-by: Gilad Broner <gbroner@codeaurora.org> Reviewed-by: Dolev Raviv <draviv@codeaurora.org> Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs: add retries for hibern8 enterYaniv Gardi2016-02-241-2/+24
| | | | | | | | | | | | | | | | | | | If hibern8 enter command fails then UFS link state may be unknown which may result into timeout of all the commands issued after failure. This change does 2 things (for pre-defined number of retry counts) after hibern8 enter failure: 1. Recovers the UFS link to active state 2. If link is recovered to active state, tries to put the UFS link in hibern8 enter again until retry count expires. Reviewed-by: Gilad Broner <gbroner@codeaurora.org> Reviewed-by: Dolev Raviv <draviv@codeaurora.org> Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs: add retries to dme_peer get and set attributeYaniv Gardi2016-02-241-11/+29
| | | | | | | | | | | | | The dme_peer get/set attribute commands are prone to errors, therefore we add three retries for the UIC command sending. Error code returned from ufshcd_send_uic_cmd() is checked, and unless it was successful or the retries have finished, another command will be sent. Reviewed-by: Gilad Broner <gbroner@codeaurora.org> Reviewed-by: Dolev Raviv <draviv@codeaurora.org> Signed-off-by: Lee Susman <lsusman@codeaurora.org> Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs: avoid exception event handler racing with PM callbacksYaniv Gardi2016-02-241-1/+14
| | | | | | | | | | | | | | If device raises the exception event in the response to the commands sent during the runtime/system PM callbacks, exception event handler might run in parallel with PM callbacks and may see unclocked register accesses. This change fixes this issue by not scheduling the exception event handler while PM callbacks are running. Reviewed-by: Gilad Broner <gbroner@codeaurora.org> Reviewed-by: Dolev Raviv <draviv@codeaurora.org> Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs: increase fDeviceInit query response timeoutYaniv Gardi2016-02-241-1/+11
| | | | | | | | | | | | | | | fDeviceInit query response time for some devices is too long that default query request timeout of 100ms may not be enough. Experiments show that fDeviceInit response sometimes takes 500ms so to be on safer side this change sets the timeout to 600ms. Without this change, we might unnecessarily have to retry fDeviceInit query requests multiple times and each query request timeout prints one error message. Reviewed-by: Gilad Broner <gbroner@codeaurora.org> Reviewed-by: Dolev Raviv <draviv@codeaurora.org> Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs: clear outstanding_request bit in case query timeoutYaniv Gardi2016-02-241-2/+20
| | | | | | | | | | | | When sending a query to the device returns with a timeout error, we clear the corresponding bit in the DOORBELL register but we don't clear the outstanding_request field as we should. This patch fixes this bug. Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Reviewed-by: Gilad Broner <gbroner@codeaurora.org> Reviewed-by: Dolev Raviv <draviv@codeaurora.org> Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-04 23:40:12 +0200