summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host/ehci-omap.c
Commit message (Collapse)AuthorAgeFilesLines
* usb/host/: const data must use __initconst not __initdataNicolas Pitre2016-04-281-1/+1
| | | | | | | | | Init data marked const should be annotated with __initconst for correctness and not __initdata. This also fixes LTO builds that otherwise fail with section mismatch errors. Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: hcd: move controller wakeup setting initialization to individual driverPeter Chen2013-12-091-0/+1
| | | | | | | | | | | | | | | Individual controller driver has different requirement for wakeup setting, so move it from core to itself. In order to align with current etting the default wakeup setting is enabled (except for chipidea host). Pass compile test with below commands: make O=outout/all allmodconfig make -j$CPU_NUM O=outout/all drivers/usb Signed-off-by: Peter Chen <peter.chen@freescale.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* DMA-API: usb: use new dma_coerce_mask_and_coherent()Russell King2013-10-311-3/+1Star
| | | | | | Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* DMA-API: usb: use dma_set_coherent_mask()Russell King2013-10-311-3/+5
| | | | | | | | | | | | | The correct way for a driver to specify the coherent DMA mask is not to directly access the field in the struct device, but to use dma_set_coherent_mask(). Only arch and bus code should access this member directly. Convert all direct write accesses to using the correct API. Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* USB: host: use dev_get_platdata()Jingoo Han2013-08-011-2/+2
| | | | | | | | Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: host: Use usb_hcd_platform_shutdown() wherever possibleRoger Quadros2013-07-251-9/+1Star
| | | | | | | | | | | Most HCD drivers are doing the same thing in their ".shutdown" callback so it makes sense to use the generic usb_hcd_platform_shutdown() handler there. Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: ehci-omap: Tweak PHY initialization sequenceRoger Quadros2013-06-171-2/+9
| | | | | | | | | | | | | | | | | | | For PHY mode, the PHYs must be brought out of reset before the EHCI controller is started. This patch fixes the issue where USB devices are not found on Beagleboard/Beagle-xm if USB has been started previously by the bootloader. (e.g. by "usb start" command in u-boot) Tested on Beagleboard, Beagleboard-xm and Pandaboard. Issue present on 3.10 onwards. Reported-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Tested-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Cc: stable <stable@vger.kernel.org> # 3.10 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge 3.10-rc3 into usb-nextGreg Kroah-Hartman2013-05-271-4/+4
|\ | | | | | | | | | | We want these fixes. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: set device dma_mask without reference to global dataStephen Warren2013-05-171-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many USB host drivers contain code such as: if (!pdev->dev.dma_mask) pdev->dev.dma_mask = &tegra_ehci_dma_mask; ... where tegra_ehci_dma_mask is a global. I suspect this code originated in commit 4a53f4e "USB: ehci-tegra: add probing through device tree" and was simply copied everywhere else. This works fine when the code is built-in, but can cause a crash when the code is in a module. The first module load sets up the dma_mask pointer, but if the module is removed and re-inserted, the value is now non-NULL, and hence is not updated to point at the new location, and hence points at a stale location within the previous module load address, which in turn causes a crash if the pointer is de-referenced. The simplest way of solving this seems to be to copy the code from ehci-platform.c, which uses the coherent_dma_mask as the target for the dma_mask pointer. Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: host: ehci-omap: Remove redundant use of of_match_ptrSachin Kamat2013-05-211-1/+1
|/ | | | | | | | | 'omap_ehci_dt_ids' is always compiled in. Hence use of of_match_ptr is unnecessary. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: ehci-omap: Improve PHY error handlingRoger Quadros2013-04-171-2/+2
| | | | | | | | | As the USB PHY layer never returns NULL we don't need to check for that condition. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: ehci-omap: Get rid of omap_ehci_init()Roger Quadros2013-03-151-20/+1Star
| | | | | | | | | | | As it does almost nothing, get rid of omap_ehci_init() and move the ehci->caps initialization part into probe(). Also remove the outdated TODO list from header. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: ehci-omap: Fix detection in HSIC modeRoger Quadros2013-03-151-17/+15Star
| | | | | | | | | | | | Move PHY initialization until after EHCI initialization is complete, instead of initializing the PHYs first, shutting them down again, and then initializing them a second time. This fixes HSIC device detection. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: ehci-omap: Try to get PHY even if not in PHY modeRoger Quadros2013-03-151-3/+4
| | | | | | | | | | Even when not in PHY mode, the USB device on the port (e.g. HUB) might need resources like RESET which can be modelled as a PHY device. So try to get the PHY device in any case. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: ehci-omap: Add device tree support and binding informationRoger Quadros2013-03-151-1/+36
| | | | | | | | | Allows the OMAP EHCI controller to be specified via device tree. Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: ehci-omap: Get platform resources by index rather than by nameRoger Quadros2013-03-151-3/+2Star
| | | | | | | | | | Since there is only one resource per type we don't really need to use resource name to obtain it. This also also makes it easier for device tree adaptation. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: ehci-omap: Remove PHY regulator handling codeRoger Quadros2013-03-151-34/+0Star
| | | | | | | | | PHY regulator handling must be done in the PHY driver Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: ehci-omap: Remove PHY reset handling codeRoger Quadros2013-03-151-62/+10Star
| | | | | | | | | | Reset GPIO handling for the PHY must be done in the PHY driver. We use the PHY helpers instead to reset the PHY. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: ehci-omap: Use PHY APIs to get the PHY device and put it out of suspendRoger Quadros2013-03-151-14/+62
| | | | | | | | | | | | | | | For each port that is in PHY mode we obtain a PHY device using the USB PHY library and put it out of suspend. It is up to platform code to associate the PHY to the controller's port and it is up to the PHY driver to manage the PHY's resources. Also remove weird spacing around declarations we come across. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: ehci-omap: Use devm_ioremap_resource()Roger Quadros2013-03-151-16/+5Star
| | | | | | | | Make use of devm_ioremap_resource() and correct comment. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: EHCI: split ehci-omap out to a separate driverAlan Stern2013-03-151-42/+34Star
| | | | | | | | | | This patch (as1645) converts ehci-omap over to the new "ehci-hcd is a library" approach, so that it can coexist peacefully with other EHCI platform drivers and can make use of the private area allocated at the end of struct ehci_hcd. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'mfd-3.9-1' of ↵Linus Torvalds2013-02-251-3/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFS updates from Samuel Ortiz: "This is the MFD pull request for the 3.9 merge window. No new drivers this time, but a bunch of fairly big cleanups: - Roger Quadros worked on a OMAP USBHS and TLL platform data consolidation, OMAP5 support and clock management code cleanup. - The first step of a major sync for the ab8500 driver from Lee Jones. In particular, the debugfs and the sysct interfaces got extended and improved. - Peter Ujfalusi sent a nice patchset for cleaning and fixing the twl-core driver, with a much needed module id lookup code improvement. - The regular wm5102 and arizona cleanups and fixes from Mark Brown. - Laxman Dewangan extended the palmas APIs in order to implement the palmas GPIO and rt drivers. - Laxman also added DT support for the tps65090 driver. - The Intel SCH and ICH drivers got a couple fixes from Aaron Sierra and Darren Hart. - Linus Walleij patchset for the ab8500 driver allowed ab8500 and ab9540 based devices to switch to the new abx500 pin-ctrl driver. - The max8925 now has device tree and irqdomain support thanks to Qing Xu. - The recently added rtsx driver got a few cleanups and fixes for a better card detection code path and now also supports the RTS5227 chipset, thanks to Wei Wang and Roger Tseng." * tag 'mfd-3.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (109 commits) mfd: lpc_ich: Use devres API to allocate private data mfd: lpc_ich: Add Device IDs for Intel Wellsburg PCH mfd: lpc_sch: Accomodate partial population of the MFD devices mfd: da9052-i2c: Staticize da9052_i2c_fix() mfd: syscon: Fix sparse warning mfd: twl-core: Fix kernel panic on boot mfd: rtsx: Fix issue that booting OS with SD card inserted mfd: ab8500: Fix compile error mfd: Add missing GENERIC_HARDIRQS dependecies Documentation: Add docs for max8925 dt mfd: max8925: Add dts mfd: max8925: Support dt for backlight mfd: max8925: Fix onkey driver irq base mfd: max8925: Fix mfd device register failure mfd: max8925: Add irqdomain for dt mfd: vexpress: Allow vexpress-sysreg to self-initialise mfd: rtsx: Support RTS5227 mfd: rtsx: Implement driving adjustment to device-dependent callbacks mfd: vexpress: Add pseudo-GPIO based LEDs mfd: ab8500: Rename ab8500 to abx500 for hwmon driver ...
| * mfd: omap-usb-host: Consolidate OMAP USB-HS platform data (part 2/3)Roger Quadros2013-02-131-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Let's have a single platform data structure for the OMAP's High-Speed USB host subsystem instead of having 3 separate ones i.e. one for board data, one for USB Host (UHH) module and one for USB-TLL module. This makes the code much simpler and avoids creating multiple copies of platform data. Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> For the ehci-omap.c part: Acked-by: Alan Stern <stern@rowland.harvard.edu>
* | USB: ehci-omap: Fix autoloading of moduleRoger Quadros2013-02-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | The module alias should be "ehci-omap" and not "omap-ehci" to match the platform device name. The omap-ehci module should now autoload correctly. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: ehci-omap: Don't free gpios that we didn't requestRoger Quadros2013-02-141-8/+0Star
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This driver does not request any gpios so don't free them. Fixes L3 bus error on multiple modprobe/rmmod of ehci_hcd with ehci-omap in use. Without this patch, EHCI will break on repeated insmod/rmmod of ehci_hcd for all OMAP2+ platforms that use EHCI and set 'phy_reset = true' in usbhs_omap_board_data. i.e. board-3430sdp.c: .phy_reset = true, board-3630sdp.c: .phy_reset = true, board-am3517crane.c: .phy_reset = true, board-am3517evm.c: .phy_reset = true, board-cm-t3517.c: .phy_reset = true, board-cm-t35.c: .phy_reset = true, board-devkit8000.c: .phy_reset = true, board-igep0020.c: .phy_reset = true, board-igep0020.c: .phy_reset = true, board-omap3beagle.c: .phy_reset = true, board-omap3evm.c: .phy_reset = true, board-omap3pandora.c: .phy_reset = true, board-omap3stalker.c: .phy_reset = true, board-omap3touchbook.c: .phy_reset = true, board-omap4panda.c: .phy_reset = false, board-overo.c: .phy_reset = true, board-zoom.c: .phy_reset = true, Cc: stable <stable@vger.kernel.org> Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'headers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2012-12-121-1/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM SoC Header cleanups from Olof Johansson: "This is a collection of header file cleanups, mostly for OMAP and AT91, that keeps moving the platforms in the direction of multiplatform by removing the need for mach-dependent header files used in drivers and other places." Fix up mostly trivial conflicts as per Olof. * tag 'headers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (106 commits) ARM: OMAP2+: Move iommu/iovmm headers to platform_data ARM: OMAP2+: Make some definitions local ARM: OMAP2+: Move iommu2 to drivers/iommu/omap-iommu2.c ARM: OMAP2+: Move plat/iovmm.h to include/linux/omap-iommu.h ARM: OMAP2+: Move iopgtable header to drivers/iommu/ ARM: OMAP: Merge iommu2.h into iommu.h atmel: move ATMEL_MAX_UART to platform_data/atmel.h ARM: OMAP: Remove omap_init_consistent_dma_size() arm: at91: move at91rm9200 rtc header in drivers/rtc arm: at91: move reset controller header to arm/arm/mach-at91 arm: at91: move pit define to the driver arm: at91: move at91_shdwc.h to arch/arm/mach-at91 arm: at91: move board header to arch/arm/mach-at91 arn: at91: move at91_tc.h to arch/arm/mach-at91 arm: at91 move at91_aic.h to arch/arm/mach-at91 arm: at91 move board.h to arch/arm/mach-at91 arm: at91: move platfarm_data to include/linux/platform_data/atmel.h arm: at91: drop machine defconfig ARM: OMAP: Remove NEED_MACH_GPIO_H ARM: OMAP: Remove unnecessary mach and plat includes ...
| * ARM: OMAP: move OMAP USB platform data to <linux/platform_data/omap-usb.h>Felipe Balbi2012-10-241-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to make single zImage work for ARM architecture, we need to make sure we don't depend on private headers. Move USB platform_data to <linux/platform_data/omap-usb.h> and add a minimal drivers/mfd/usb-omap.h. Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Partha Basak <parthab@india.ti.com> Cc: Keshava Munegowda <keshava_mgowda@ti.com> Cc: linux-usb@vger.kernel.org Signed-off-by: Felipe Balbi <balbi@ti.com> [tony@atomide.com: updated for local mfd/usb-omap.h] Signed-off-by: Tony Lindgren <tony@atomide.com>
* | USB: EHCI: remove ehci_port_power() routineAlan Stern2012-10-311-3/+0Star
|/ | | | | | | | | | | | | | | This patch (as1623) removes the ehci_port_power() routine and all the places that call it. There's no reason for ehci-hcd to change the port power settings; the hub driver takes care of all that stuff. There is one exception: When the controller is resumed from hibernation or following a loss of power, the ports that are supposed to be handed over to a companion controller must be powered on first. Otherwise the handover won't work. This process is not visible to the hub driver, so it has to be handled in ehci-hcd. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* OMAP: USB : Fix the EHCI enumeration and core retention issueKeshava Munegowda2012-08-101-166/+1Star
| | | | | | | | | | | | | | | | | | | This commit 354ab8567ae3107a8cbe7228c3181990ba598aac titled "Fix OMAP EHCI suspend/resume failure (i693)" is causing the usb hub and device detection fails in beagle XM causeing NFS not functional. This affects the core retention too. The same commit logic needs to be revisted adhering to hwmod and device tree framework. for now, this commit id 354ab8567ae3107a8cbe7228c3181990ba598aac titled "Fix OMAP EHCI suspend/resume failure (i693)" reverted. This patch is validated on BeagleXM with NFS support over usb ethernet and USB mass storage and other device detection. Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Cc: stable <stable@vger.kernel.org> # 3.5 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'mfd-3.6-1' of ↵Linus Torvalds2012-07-301-4/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFD bits from Samuel Ortiz: "We have support for a few new drivers: - Samsung s2mps11 - Wolfson Microelectronics wm5102 and wm5110 - Marvell 88PM800 and 88PM805 - TI twl6041 We also have our regular driver improvements: - Device tree and IRQ domain support for STE AB8500 - Regmap and devm_* API conversion for TI tps6586x - Device tree support for Samsung max77686 - devm_* API conversion for STE AB3100 Besides that, quite a lot of fixing and cleanup for mc13xxx, tps65910, tps65090, da9052 and twl-core." Fix up mostly trivial conflicts, with the exception of drivers/usb/host/ehci-omap.c in particular, which had some re-organization of the reset sequence (commit 1a49e2ac9651: "EHCI: centralize controller initialization") that clashed with commit 2761a6394516 ("mfd: USB: Fix the omap-usb EHCI ULPI PHY reset fix issues"). In particular, commit 2761a6394516 moved the usb_add_hcd() to the *middle* of the reset sequence, which clashes fairly badly with the reset sequence re-organization (although it could have been done inside the new omap_ehci_init() function). I left that part of commit 2761a6394516 just undone. * tag 'mfd-3.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (110 commits) mfd: Ensure AB8500 platform data is passed through db8500-prcmu to MFD Core mfd: Arizone core should select MFD_CORE mfd: Fix arizona-irq.c build by selecting REGMAP_IRQ mfd: Add debug trace on entering and leaving arizone runtime suspend mfd: Correct tps65090 cell names mfd: Remove gpio support from tps6586x core driver ARM: tegra: defconfig: Enable tps6586x gpio gpio: tps6586x: Add gpio support through platform driver mfd: Cache tps6586x register through regmap mfd: Use regmap for tps6586x register access. mfd: Use devm managed resources for tps6586x input: Add onkey support for 88PM80X PMIC mfd: Add support for twl6041 mfd: Fix twl6040 revision information mfd: Matches should be NULL when populate anatop child devices input: ab8500-ponkey: Create AB8500 domain IRQ mapping mfd: Add missing out of memory check for pcf50633 Documentation: Describe the AB8500 Device Tree bindings mfd: Add tps65910 32-kHz-crystal-input init mfd: Drop modifying mc13xxx driver's id_table in probe ...
| * mfd: USB: Fix the omap-usb EHCI ULPI PHY reset fix issues.Russ Dill2012-07-091-10/+8Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue' (1fcb57d0) fixes an issue where the ULPI PHYs were not held in reset while initializing the EHCI controller. However, it also changes behavior in omap-usb-host.c omap_usbhs_init by releasing reset while the configuration in that function was done. This change caused a regression on BB-xM where USB would not function if 'usb start' had been run from u-boot before booting. A change was made to release reset a little bit earlier which fixed the issue on BB-xM and did not cause any regressions on 3430 sdp, the board for which the fix was originally made. This new fix, 'USB: EHCI: OMAP: Finish ehci omap phy reset cycle before adding hcd.', (3aa2ae74) caused a regression on OMAP5. The original fix to hold the EHCI controller in reset during initialization was correct, however it appears that changing omap_usbhs_init to not hold the PHYs in reset during it's configuration was incorrect. This patch first reverts both fixes, and then changes ehci_hcd_omap_probe in ehci-omap.c to hold the PHYs in reset as the original patch had done. It also is sure to incorporate the _cansleep change that has been made in the meantime. I've tested this on Beagleboard xM, I'd really like to get an ack from the 3430 sdp and OMAP5 guys before getting this merged. v3 - Brown paper bag its too early in the morning actually run git commit amend fix v2 - Put cansleep gpiolib call outside of spinlock Acked-by: Mantesh Sarashetti <mantesh@ti.com> Tested-by: Mantesh Sarashetti <mantesh@ti.com> Acked-by: Keshava Munegowda <keshava_mgowda@ti.com> Tested-by: Keshava Munegowda <keshava_mgowda@ti.com> Signed-off-by: Russ Dill <Russ.Dill@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* | USB: ehci-omap: fix compile failure(v1)Ming Lei2012-07-171-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The omap_ehci_init() is introduced in the below commit: commit 1a49e2ac9651df7349867a5cf44e2c83de1046af(EHCI: centralize controller initialization) the local variable of 'pdev' inside omap_ehci_init() is used but not defined, so fix the compiling failure. Signed-off-by: Ming Lei <ming.lei@canonical.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | EHCI: centralize controller initializationAlan Stern2012-07-091-53/+51Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1564c) converts the EHCI platform drivers to use the central ehci_setup() routine for generic controller initialization rather than each having its own idiosyncratic approach. The major point of difficulty lies in ehci-pci's many vendor- and device-specific workarounds. Some of them have to be applied before calling ehci_setup() and some after, which necessitates a fair amount of code motion. The other platform drivers require much smaller changes. One point not addressed by the patch is whether ports should be powered on or off following initialization. The different drivers appear to handle this pretty much at random. In fact it shouldn't matter, because the hub driver turns on power to all ports when it binds to the root hub. Straightening that out will be left for another day. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | ARM: OMAP: USB: Fixup ehci_hcd_omap_probe error pathRuss Dill2012-06-271-1/+5
|/ | | | | | | | | | | | | | | | A recent commit, [PATCH] Fix OMAP EHCI suspend/resume failure (i693) '354ab856' causes ehci probe to fail on omap3xxx. This exposed bugs in the ehci_hcd_omap_probe error path causing an oops. On the error path, call usb_remove_hcd if usb_add_hcd has been called, and call usb_put_hcd if usb_alloc_hcd has been called. Tested on BB-xM. Signed-off-by: Russ.Dill@ti.com Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Fix OMAP EHCI suspend/resume failure (i693)Anand Gadiyar2012-06-141-1/+167
| | | | | | | | | | | | | | | | | | | Its observed with some PHY, the 60Mhz clock gets cut too soon for OMAP EHCI, leaving OMAP-EHCI in a bad state. So on starting port suspend, make sure the 60Mhz clock to EHCI is kept alive using an internal clock, so that EHCi can cleanly transition its hw state machine on a port suspend. Its not proven if this is the issue hit on USB3333, but the symptoms look very similar. Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Vikram Pandita <vikram.pandita@ti.com> Signed-off-by: Volodymyr Mieshkov <x0182794@ti.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ARM: OMAP: USB: fix warning on EHCI PHY reset pathIgor Grinberg2012-05-101-2/+2
| | | | | | | | | | | | When PHY reset pin is connected to a GPIO on external GPIO chip (e.g. I2C), we should not call the gpio_set_value() function, but gpio_set_value_cansleep(). Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Felipe Balbi <balbi@ti.com> Tested-by: Govindraj.R <govindraj.raja@ti.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: EHCI: OMAP: Finish ehci omap phy reset cycle before adding hcd.Russ Dill2012-05-051-9/+9
| | | | | | | | | | | | | | 'ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue' (1fcb57d0f) created a regression with Beagleboard xM if booting the kernel after running 'usb start' under u-boot. Finishing the reset before calling 'usb_add_hcd' fixes the regression. This is most likely due to usb_add_hcd calling the driver's reset and init functions which expect the hardware to be up and running. Signed-off-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Cc: stable <stable@vger.kernel.org> [3.4] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issueKeshava Munegowda2012-04-161-2/+37
| | | | | | | | | | | | | | | | | | | It is observed that the echi ports of 3430 sdp board are not working due to the random timing of programming the associated GPIOs of the ULPI PHYs of the EHCI for reset. If the PHYs are reset at during usbhs core driver, host ports will not work because EHCI driver is loaded after the resetting PHYs. The PHYs should be in reset state while initializing the EHCI controller. The code which does the GPIO pins associated with the PHYs are programmed to reset is moved from the USB host core driver to EHCI driver. Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com> Reviewed-by: Partha Basak <parthab@india.ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Tested-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2012-01-091-10/+7Star
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Driver specific changes Again, a lot of platforms have changes in here: pxa, samsung, omap, at91, imx, ... * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits) ARM: sa1100: clean up of the clock support ARM: pxa: add dummy clock for sa1100-rtc RTC: sa1100: support sa1100, pxa and mmp soc families RTC: sa1100: remove redundant code of setting alarm RTC: sa1100: Clean out ost register Input: zylonite-wm97xx - replace IRQ_GPIO() with gpio_to_irq() pcmcia: pxa: replace IRQ_GPIO() with gpio_to_irq() ARM: EXYNOS: Modified files for SPI consolidation work ARM: S5P64X0: Enable SDHCI support ARM: S5P64X0: Add lookup of sdhci-s3c clocks using generic names ARM: S5P64X0: Add HSMMC setup for host Controller ARM: EXYNOS: Add USB OHCI support to ORIGEN board USB: Add Samsung Exynos OHCI diver ARM: EXYNOS: Add USB OHCI support to SMDKV310 board ARM: EXYNOS: Add USB OHCI device net: macb: fix build break with !CONFIG_OF i2c: tegra: Support DVC controller in device tree i2c: tegra: Add __devinit/exit to probe/remove net/at91_ether: use gpio_is_valid for phy IRQ line ARM: at91/net: add macb ethernet controller in 9g45/9g20 DT ...
| * ARM: OMAP: USBHOST: Replace usbhs core driver APIs by Runtime pm APIsKeshava Munegowda2011-12-161-10/+7Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ehci and ohci drivers does not use the APIs of the usbhs core driver; the runtime pm APIs are used for clock enable/disable. Since usbhs is parent platform device of the ehci and ohci devices, the runtime apis indirectly uses the usb hs core device as input parameter to for clock functions. Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Reviewed-by: Partha Basak <parthab@india.ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Paul Walmsley <paul@pwsan.com>
* | usb: Remove ehci_reset call from ehci_runGeoff Levand2011-12-081-0/+2
|/ | | | | | | | | | | | | | | Remove the ehci_reset() call done in the ehci_run() routine of the USB EHCI host controller driver and add an ehci_reset() call to the probe processing of all EHCI platform drivers that do not already call ehci_reset(). The call to ehci_reset() from ehci_run() was problematic for several platform drivers, and unnecessary for others. This change moves the decision to call ehci_reset() at driver startup to the platform driver code. Signed-off-by: Geoff Levand <geoff@infradead.org> Acked-by: Alan Stern <stern@rowland.harvard.edu>
* USB: irq: Remove IRQF_DISABLEDYong Zhang2011-09-181-1/+1
| | | | | | | This flag is a NOOP and can be removed now. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: host: ehci-omap: fix .remove and failure handling path of .probe(v1)Ming Lei2011-08-011-0/+16
| | | | | | | | | | | Obviously, disabling & put regulator and iounmap(hcd->regs) are missed in .remove and failure handling path of .probe, so add them. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Keshava Munegowda <Keshava_mgowda@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* Merge branch 2.6.39-rc7 into usb-linusGreg Kroah-Hartman2011-05-101-0/+20
|\ | | | | | | | | | | | | This was needed to resolve a conflict in: drivers/usb/host/isp1760-hcd.c Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * omap:usb: add regulator support for EHCIKeshava Munegowda2011-05-021-0/+20
| | | | | | | | | | | | | | | | | | | | in case of ehci phy mode; regulator of phy should be enabled before initializing the usbhs core driver. Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com> Tested-by: Steve Calfee <stevecalfee@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | USB: EHCI: Support controllers with big endian capability regsJan Andersson2011-05-031-1/+1
|/ | | | | | | | | | | | | | | | The two first HC capability registers (CAPLENGTH and HCIVERSION) are defined as one 8-bit and one 16-bit register. Most HC implementations have selected to treat these registers as part of a 32-bit register, giving the same layout for both big and small endian systems. This patch adds a new quirk, big_endian_capbase, to support controllers with big endian register interfaces that treat HCIVERSION and CAPLENGTH as individual registers. Signed-off-by: Jan Andersson <jan@gaisler.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: host: omap: ehci and ohci simplificationKeshava Munegowda2011-03-011-932/+84Star
| | | | | | | | | | The ehci and ohci drivers are simplified; Since UHH and TLL initialization, clock handling are done by common usbhs core driver, these functionalities are removed from ehci and ohci drivers. Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* arm: omap: usb: create common enums and structures for ehci and ohciKeshava Munegowda2011-03-011-21/+21
| | | | | | | | Create the ehci and ohci specific platform data structures. The port enum values are made common for both ehci and ohci. Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: host: omap: switch to platform_get_resource_bynameFelipe Balbi2011-03-011-3/+3
| | | | | | | | | now that we have names on all memory bases, we can switch to use platform_get_resource_byname() which will make it simpler when we move to a setup where OHCI and EHCI on OMAP play well together. Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: ehci: omap: add support for TLL mode on OMAP4Anand Gadiyar2011-03-011-0/+134
| | | | | | | | | | | | | | The EHCI controller in OMAP4 supports a transceiver-less link mode (TLL mode), similar to the one in OMAP3. On the OMAP4 however, there are an additional set of clocks that need to be turned on to get this working. Request and configure these for each port if that port is connected in TLL mode. Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-08 09:33:51 +0200