summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host
Commit message (Collapse)AuthorAgeFilesLines
* USB: EHCI: slow down ITD reuseKarsten Wiese2009-02-274-8/+57
| | | | | | | | | | | | | | | | | | | | | | | | | Currently ITDs are immediately recycled whenever their URB completes. However, EHCI hardware can sometimes remember some ITD state. This means that when the ITD is reused before end-of-frame it may sometimes cause the hardware to reference bogus state. This patch defers reusing such ITDs by moving them into a new ehci member cached_itd_list. ITDs resting in cached_itd_list are moved back into their stream's free_list once scan_periodic() detects that the active frame has elapsed. This makes the snd_usb_us122l driver (in kernel since .28) work right when it's hooked up through EHCI. [ dbrownell@users.sourceforge.net: comment fixups ] Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Tested-by: Philippe Carriere <philippe-f.carriere@wanadoo.fr> Tested-by: Federico Briata <federicobriata@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB/PCI: Fix resume breakage of controllers behind cardbus bridgesRafael J. Wysocki2009-02-183-3/+0Star
| | | | | | | | | | | | | | | | | | | | | If a USB PCI controller is behind a cardbus bridge, we are trying to restore its configuration registers too early, before the cardbus bridge is operational. To fix this, call pci_restore_state() from usb_hcd_pci_resume() and remove usb_hcd_pci_resume_early() which is no longer necessary (the configuration spaces of USB controllers that are not behind cardbus bridges will be restored by the PCI PM core with interrupts disabled anyway). This patch fixes the regression from 2.6.28 tracked as http://bugzilla.kernel.org/show_bug.cgi?id=12659 [ Side note: the proper long-term fix is probably to just force the unplug event at suspend time instead of doing a plug/unplug at resume time, but this patch is fine regardless - Linus ] Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reported-by: Miles Lane <miles.lane@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* wusb: whci-hcd: always lock whc->lock with interrupts disabledDavid Vrabel2009-02-162-4/+4
| | | | | | Always lock whc->lock with spin_lock_irq() or spin_lock_irqsave(). Signed-off-by: David Vrabel <david.vrabel@csr.com>
* Merge branch 'master' of ↵David Vrabel2009-02-0215-12/+3869
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into for-upstream
| * USB: Driver for Freescale QUICC Engine USB Host ControllerAnton Vorontsov2009-01-2810-0/+3861
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the FHCI USB controller, as found in the Freescale MPC836x and MPC832x processors. It can support Full or Low speed modes. Quite a lot the hardware is doing by itself (SOF generation, CRC generation and checking), though scheduling and retransmission is on software's shoulders. This controller does not integrate the root hub, so this driver also fakes one-port hub. External hub is required to support more than one device. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * USB: omap1 ohci buildfix (otg related)David Brownell2009-01-281-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | > > drivers/built-in.o: In function `ohci_omap_init': > > hid-quirks.c:(.text+0x6c608): undefined reference to `otg_get_transceiver' > > drivers/built-in.o: In function `omap_udc_probe': > > hid-quirks.c:(.init.text+0x34c0): undefined reference to `otg_get_transceiver' > > hid-quirks.c:(.init.text+0x3d40): undefined reference to `otg_put_transceiver' Reported-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * USB: Fix suspend-resume of PCI USB controllersRafael J. Wysocki2009-01-283-3/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit a0d4922da2e4ccb0973095d8d29f36f6b1b5f703 (USB: fix up suspend and resume for PCI host controllers) attempted to fix the suspend-resume of PCI USB controllers, but unfortunately it did that incorrectly and interrupts are left enabled by the USB controllers' ->suspend_late() callback as a result. This leads to serious problems during suspend which are very difficult to debug. Fix the issue by removing the ->suspend_late() callback of PCI USB controllers and moving the code from there to the ->suspend() callback executed with interrupts enabled. Additionally, make the ->resume() callback of PCI USB controllers execute pci_enable_wake(dev, PCI_D0, false) to disable wake-up from the full power state (PCI_D0). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Tested-by: Andrey Borzenkov <arvidjaar@mail.ru> Tested-by: "Jeff Chua" <jeff.chua.linux@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: "Zdenek Kabelac" <zdenek.kabelac@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * USB: don't enable wakeup by default for PCI host controllersAlan Stern2009-01-282-6/+4Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1199) changes the initial wakeup settings for PCI USB host controllers. The controllers are marked as capable of waking the system, but wakeup is not enabled by default. It turns out that enabling wakeup for USB host controllers has a lot of bad consequences. As the simplest example, if a USB mouse or keyboard is unplugged immediately after the computer is put to sleep, the unplug will cause the system to wake back up again! We are better off marking them as wakeup-capable and leaving wakeup disabled. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Rafael J. Wysocki <rjw@sisk.pl> CC: David Brownell <david-b@pacbell.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [ARM] omap: ensure OMAP drivers pass a struct device to clk_get()Russell King2009-01-241-3/+3
| | | | | | | | Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | Merge branch 'master' of ↵David Vrabel2009-01-2220-142/+4714
|\| | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into for-upstream
| * USB: automatically enable wakeup for PCI host controllersAlan Stern2009-01-073-10/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1193b) enables wakeup during initialization for all PCI host controllers, and it removes some code (and comments!) that are no longer needed now that the PCI core automatically initializes wakeup settings for all new devices. The idea is that the bus should initialize wakeup, and the bus glue or controller driver should enable it. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * USB: fix up suspend and resume for PCI host controllersAlan Stern2009-01-073-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1192) rearranges the USB PCI host controller suspend and resume and resume routines: Use pci_wake_from_d3() for enabling and disabling wakeup, instead of pci_enable_wake(). Carry out the actual state change while interrupts are disabled. Change the order of the preparations to agree with the general recommendation for PCI devices, instead of messing around with the wakeup settings while the device is in D3. In .suspend: Call the underlying driver to disable IRQ generation; pci_wake_from_d3(device_may_wakeup()); pci_disable_device(); In .suspend_late: pci_save_state(); pci_set_power_state(D3hot); (for PPC_PMAC) Disable ASIC clocks In .resume_early: (for PPC_PMAC) Enable ASIC clocks pci_set_power_state(D0); pci_restore_state(); In .resume: pci_enable_device(); pci_set_master(); pci_wake_from_d3(0); Call the underlying driver to reenable IRQ generation Add the necessary .suspend_late and .resume_early method pointers to the PCI host controller drivers. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * USB: isp1760: don't auto disable Port1 on ISP1761Thomas Hommel2009-01-073-11/+6Star
| | | | | | | | | | | | | | | | | | | | | | | | | | There is no need to disable port 1 on ISP1761. That port could be used as an OTG port which would require a different init sequence. However we don't have OTG support (yet) so we can use it as a normal USB port. This patch allows port 1 to be used a normal Port on the ISP1761. Signed-off-by: Thomas Hommel <Thomas.Hommel@gefanuc.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * USB: isp1760: Fix probe in PCI glue codeKarl Bongers2009-01-071-42/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Contains fixes so probe on x86 PCI runs, apparently I'm first to try this. Several fixes to memory access to probe host scratch register. Previously would bug check on chip_addr var used uninitialized. Scratch reg write failed in one instance due to 16-bit initial access mode, so added "& 0x0000ffff" to the readl as fix. Includes some general cleanup - remove global vars, organize memory map resource use. Signed-off-by: Karl Bongers <kbongers@jged.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * USB: isp1760: use a specific PLX bridge instead of any bdridgeSebastian Andrzej Siewior2009-01-071-6/+10
| | | | | | | | | | | | | | | | | | | | | | | | this driver can't handle (of course) any brdige class devices. So we now are just active on one specific bridge which should be only the isp1761 chip behind a PLX bridge. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by: Karl Bongers <kblists08@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * USB: m66592 and r8a66597 resource changesMagnus Damm2009-01-071-5/+3Star
| | | | | | | | | | | | | | | | | | | | | | Use the more common platform_get_resource() together with index instead of depending on the resource name and platform_get_resource_by_name(). Replace the resource_len() implementation with resource_size(). Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * USB: Convert ohci-pnx4008 to a new-style i2c driverJean Delvare2009-01-071-49/+36Star
| | | | | | | | | | | | | | | | | | The legacy i2c binding model will go away soon, convert ohci-pnx4008 to use the new binding model instead. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * oxu210hp-hcd.c: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers2009-01-071-3/+3
| | | | | | | | | | | | Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * usb: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers2009-01-071-1/+1
| | | | | | | | | | | | Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * USB: powerpc: Workaround for the PPC440EPX USBH_23 errata [take 3]Vitaly Bordug2009-01-074-2/+111
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A published errata for ppc440epx states, that when running Linux with both EHCI and OHCI modules loaded, the EHCI module experiences a fatal error when a high-speed device is connected to the USB2.0, and functions normally if OHCI module is not loaded. There used to be recommendation to use only hi-speed or full-speed devices with specific conditions, when respective module was unloaded. Later, it was observed that ohci suspend is enough to keep things going, and it was turned into workaround, as explained below. Quote from original descriprion: The 440EPx USB 2.0 Host controller is an EHCI compliant controller. In USB 2.0 Host controllers, each EHCI controller has one or more companion controllers, which may be OHCI or UHCI. An USB 2.0 Host controller will contain one or more ports. For each port, only one of the controllers is connected at any one time. In the 440EPx, there is only one OHCI companion controller, and only one USB 2.0 Host port. All ports on an USB 2.0 controller default to the companion controller. If you load only an ohci driver, it will have control of the ports and any deviceplugged in will operate, although high speed devices will be forced to operate at full speed. When an ehci driver is loaded, it explicitly takes control of the ports. If there is a device connected, and / or every time there is a new device connected, the ehci driver determines if the device is high speed or not. If it is high speed, the driver retains control of the port. If it is not, the driver explicitly gives the companion controller control of the port. The is a software workaround that uses Initial version of the software workaround was posted to linux-usb-devel: http://www.mail-archive.com/linux-usb-devel@lists.sourceforge.net/msg54019.html and later available from amcc.com: http://www.amcc.com/Embedded/Downloads/download.html?cat=1&family=15&ins=2 The patch below is generally based on the latter, but reworked to powerpc/of_device USB drivers, and uses a few devicetree inquiries to get rid of (some) hardcoded defines. Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org> Signed-off-by: Stefan Roese <sr@denx.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * USB: EHCI pci-quirks.c: don't wait so long for BIOS handoffSteven Noonan2009-01-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of waiting a painful 5000ms, quirk_usb_disable_ehci() now does a 1000ms loop to wait for the BIOS to acknowledge the handoff. The five second delay is really quite irritating to have to deal with every boot up, and I very seriously doubt any non-broken bios takes more than a second to do the actual handoff. Signed-off-by: Steven Noonan <steven@uplinklabs.net> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * usb host: Oxford OXU210HP HCD driver.Rodolfo Giometti2009-01-074-0/+4446
| | | | | | | | | | | | | | | | | | | | This driver implements the support for Oxford OXU210HP USB high-speed host, no peripheral nor OTG. Signed-off-by: Rodolfo Giometti <giometti@linux.it> Cc: Kan Liu <kan.k.liu@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * USB: Avoid 20ms delay in EHCI resumeVikram Pandita2009-01-071-3/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For function ehci_bus_resume() - Added flag resume_needed No need to wait for 20ms if no port was suspended - Change mdelay to msleep - release and reacquire the spinlock around mdelay Signed-off-by: vikram pandita <vikram.pandita@ti.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * USB: use pci_ioremap_bar() in drivers/usbArjan van de Ven2009-01-071-6/+6
| | | | | | | | | | | | | | | | | | | | | | Use the newly introduced pci_ioremap_bar() function in drivers/usb. pci_ioremap_bar() just takes a pci device and a bar number, with the goal of making it really hard to get wrong, while also having a central place to stick sanity checks. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * USB: clean up redundant tests on unsignedroel kluin2009-01-071-6/+2Star
| | | | | | | | | | | | | | | | | | temp, bytes and param->{length,sglen,vary} are unsigned so these tests do nothing. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | wusb: timeout when waiting for ASL/PZL updates in whci-hcdDavid Vrabel2009-01-074-4/+30
|/ | | | | | | Timeout if an ASL or PZL update doesn't not complete and reset the hardware. Signed-off-by: David Vrabel <david.vrabel@csr.com>
* Merge branch 'master' of ↵David Vrabel2009-01-025-11/+58
|\ | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into for-upstream Conflicts: drivers/uwb/wlp/eda.c
| * Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2008-12-313-8/+19
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (407 commits) [ARM] pxafb: add support for overlay1 and overlay2 as framebuffer devices [ARM] pxafb: cleanup of the timing checking code [ARM] pxafb: cleanup of the color format manipulation code [ARM] pxafb: add palette format support for LCCR4_PAL_FOR_3 [ARM] pxafb: add support for FBIOPAN_DISPLAY by dma braching [ARM] pxafb: allow pxafb_set_par() to start from arbitrary yoffset [ARM] pxafb: allow video memory size to be configurable [ARM] pxa: add document on the MFP design and how to use it [ARM] sa1100_wdt: don't assume CLOCK_TICK_RATE to be a constant [ARM] rtc-sa1100: don't assume CLOCK_TICK_RATE to be a constant [ARM] pxa/tavorevb: update board support (smartpanel LCD + keypad) [ARM] pxa: Update eseries defconfig [ARM] 5352/1: add w90p910-plat config file [ARM] s3c: S3C options should depend on PLAT_S3C [ARM] mv78xx0: implement GPIO and GPIO interrupt support [ARM] Kirkwood: implement GPIO and GPIO interrupt support [ARM] Orion: share GPIO IRQ handling code [ARM] Orion: share GPIO handling code [ARM] s3c: define __io using the typesafe version [ARM] S3C64XX: Ensure CPU_V6 is selected ...
| | * Merge branch 'omap3-upstream' of ↵Russell King2008-12-151-4/+4
| | |\ | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into devel
| | | * ARM: OMAP: Switch ohci-omap to gpio_request/free callsJarkko Nikula2008-12-111-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Switch to gpio_request/free calls Cc: linux-usb@vger.kernel.org Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | | * ARM: OMAP: switch to gpio_direction_inputDavid Brownell2008-12-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | More switchover to the cross-platform GPIO interface: use gpio_direction_input(), not an OMAP-specific call. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | Merge git://git.marvell.com/orion into develRussell King2008-12-133-13/+25
| | |\ \
| | | * | [ARM] Orion: add the option to support different ehci phy initializationRonen Shitrit2008-12-041-3/+14
| | | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Orion ehci driver serves the Orion, kirkwood and DD Soc families. Since each of those integrate a different USB phy we should have the ability to use few initialization sequences or to leave the boot loader phy settings as is. Signed-off-by: Ronen Shitrit <rshitrit@marvell.com>
| | * | [ARM] pxa: don't pass a consumer clock name for devices with unique clocksRussell King2008-11-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Where devices only have one consumer, passing a consumer clock ID has no real benefit. Remove it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | usb: Fix up sh_mobile usbf clock framework warnings.Paul Mundt2008-12-221-2/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | drivers/usb/gadget/m66592-udc.c: In function 'm66592_probe': drivers/usb/gadget/m66592-udc.c:1672: warning: label 'clean_up2' defined but not used drivers/usb/host/r8a66597-hcd.c: In function 'r8a66597_probe': drivers/usb/host/r8a66597-hcd.c:2401: warning: label 'clean_up2' defined but not used Added by commit 985fc7c81c7852f2e104c71cbe913ace683c9e6a ("sh: sh_mobile usbf clock framework support"). Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * | | sh: sh_mobile usb clock framework supportMagnus Damm2008-12-222-3/+40
| | |/ | |/| | | | | | | | | | | | | | | | | | | Add clock framework support to the usb/r8a66597 driver and adjust the cpu specific code accordingly. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* | | uwb: use dev_dbg() for debug messagesDavid Vrabel2008-12-221-48/+7Star
| | | | | | | | | | | | | | | | | | | | | Instead of the home-grown d_fnstart(), d_fnend() and d_printf() macros, use dev_dbg() or remove the message entirely. Signed-off-by: David Vrabel <david.vrabel@csr.com>
* | | Merge branch 'master' of ↵David Vrabel2008-12-082-10/+11
|\| | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into for-upstream
| * | USB: fix SB600 USB subsystem hang bugShane Huang2008-12-011-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is required for all AMD SB600 revisions to avoid USB subsystem hang symptom. The USB subsystem hang symptom is observed when the system has multiple USB devices connected to it. In some cases a USB hub may be required to observe this symptom. Reported in bugzilla as #11599, the similar patch for SB700 old revision is: commit b09bc6cbae4dd3a2d35722668ef2c502a7b8b093 Reported-by: raffaele <ralfconn@tele2.it> Tested-by: Roman Mamedov <roman@rm.pp.ru> Signed-off-by: Shane Huang <shane.huang@amd.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | Revert "USB: improve ehci_watchdog's side effect in CPU power management"Greg Kroah-Hartman2008-12-011-7/+5Star
| |/ | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit f0d781d59cb621e1795d510039df973d0f8b23fc. It was the wrong thing to do, and does not really do what it said it did. Cc: Yi Yang <yi.y.yang@intel.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | wusb: add debug files for ASL, PZL and DI to the whci-hcd driverDavid Vrabel2008-11-268-121/+201
| | | | | | | | | | | | | | Add asl, pzl and di debugfs files to uwb/uwbN/wusbhc for WHCI host controller. These dump the current ASL, PZL and DI buffer. Signed-off-by: David Vrabel <david.vrabel@csr.com>
* | wusb: whci-hcd shouldn't do ASL/PZL updates while channel is inactiveDavid Vrabel2008-11-252-6/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | ASL/PZL updates while the WUSB channel is inactive (i.e., the PZL and ASL are stopped) may not complete. This causes hangs when removing the whci-hcd module if a device is still connected (removing the device does an endpoint_disable which results in an ASL update to remove the qset). If the WUSB channel is inactive the update can simply be skipped as the WHC doesn't care about the state of the ASL/PZL. Signed-off-by: David Vrabel <david.vrabel@csr.com>
* | Merge branch 'master' of ↵David Vrabel2008-11-251-0/+21
|\| | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into for-upstream
| * USB: fix SB700 usb subsystem hang bugAndiry Xu2008-11-201-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is required for AMD SB700 south bridge revision A12 and A13 to avoid USB subsystem hang symptom. The USB subsystem hang symptom is observed when the system has multiple USB devices connected to it. In some cases a USB hub may be required to observe this symptom. This patch works around the problem by correcting the internal register setting that will help by changing the behavior of the internal logic to avoid the USB subsystem hang issue. The change in the behavior of the logic does not impact the normal operation of the USB subsystem. Reported-by: Volker Armin Hemmann <volker.armin.hemmann@tu-clausthal.de> Tested-by: Volker Armin Hemmann <volker.armin.hemmann@tu-clausthal.de> Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Libin Yang <libin.yang@amd.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | Merge branch 'master' of ↵David Vrabel2008-11-197-46/+37Star
|\| | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into for-upstream
| * USB: EHCI: fix divide-by-zero bugAlan Stern2008-11-131-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1164) fixes a bug in the EHCI scheduler. The interval value it uses is already in linear format, not logarithmically coded. The existing code can sometimes crash the system by trying to divide by zero. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Cc: Stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * USB: EHCI: fix handling of dead controllersAlan Stern2008-11-131-13/+12Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1165) makes a few small changes in the logic used by ehci-hcd when it encounters a controller error: Instead of printing out the masked status, it prints the original status as read directly from the hardware. It doesn't check for the STS_HALT status bit before taking action. The mere fact that the STS_FATAL bit is set means that something bad has happened and the controller needs to be reset. With the old code this test could never succeed because the STS_HALT bit was masked out from the status. I anticipate that this will prevent the occasional "irq X: nobody cared" problem people encounter when their EHCI controllers die. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * usb: r8a66597-hcd: fix wrong data access in SuperH on-chip USBYoshihiro Shimoda2008-11-131-2/+3
| | | | | | | | | | | | | | | | | | When I used SuperH on-chip USB, there was the problem that accessed r8a66597_root_hub which was not allocated. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * USB: remove optional bus bindings in isp1760, fixing runtime warningSebastian Andrzej Siewior2008-11-132-28/+17Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Roland Reported the following: | kmem_cache_create: duplicate cache isp1760_qtd | Pid: 461, comm: modprobe Tainted: G W 2.6.28-rc2-git3-default #4 | Call Trace: | [<c017540e>] kmem_cache_create+0xc9/0x3a3 | [<c0159a8d>] free_pages_bulk+0x16c/0x1c9 | [<f165c05f>] isp1760_init+0x0/0xb [isp1760] | [<f165c018>] init_kmem_once+0x18/0x5f [isp1760] | [<f165c064>] isp1760_init+0x5/0xb [isp1760] | [<c010113d>] _stext+0x4d/0x148 | [<c0142936>] load_module+0x12cd/0x142e | [<c01743c4>] kmem_cache_destroy+0x0/0xd7 | [<c0142b1e>] sys_init_module+0x87/0x176 | [<c01039eb>] sysenter_do_call+0x12/0x2f The reason, is that ret is initialized with ENODEV instead of 0 _or_ the kmem cache is not freed in error case with no bus binding. The difference between OF+PCI and OF only is | 15148 804 32 15984 3e70 isp1760-of-pci.o | 13748 676 8 14432 3860 isp1760-of.o about 1.5 KiB. Until there is a checkbox where the user *must* select atleast one item, and may select multiple entries I don't make it selectable anymore. Having a driver which can't be used under any circumstances is broken anyway and I've seen distros shipping it that way. Reported-by: Roland Kletzing <devzero@web.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>a Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * USB: Fix PS3 USB shutdown problemsGeoff Levand2008-11-132-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add ehci_shutdown() or ohci_shutdown() calls to the USB PS3 bus glue. ehci_shutdown() and ohci_shutdown() do some controller specific cleanups not done by usb_remove_hcd(). Fixes errors on shutdown or reboot similar to these: ps3-ehci-driver sb_07: HC died; cleaning up irq 51: nobody cared (try booting with the "irqpoll" option) Related bugzilla reports: http://bugzilla.kernel.org/show_bug.cgi?id=11819 http://bugzilla.terrasoftsolutions.com/show_bug.cgi?id=317 Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-11-19 10:29:56 +0100