summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host
Commit message (Collapse)AuthorAgeFilesLines
* USB: drivers/usb/host/isp1760-hcd.c: processor flags have type `unsigned long'Andrew Morton2008-07-221-2/+2
| | | | | | Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: uhci: mark root_hub_hub_des[] as constMing Lei2008-07-221-1/+1
| | | | | | | | | mark this array as const because it is read-only Signed-off-by: Ming Lei <tom.leiming@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: host: mark const variable tables as "const"Ming Lei2008-07-221-3/+3
| | | | | | | | | | | Mark the tables as const so that they end up in .rodata section and don't cacheline share with things that get written to. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ehci-hcd unlink speedupsDavid Brownell2008-07-223-10/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes some performance bugs observed with some workloads when unlinking EHCI queue header (QH) descriptors from the async ring (control/bulk schedule). The mechanism intended to defer unlinking an empty QH (so there is no penalty in common cases where it's quickly reused) was not working as intended. Sometimes the unlink was scheduled: - too quickly ... which can be a *strong* negative effect, since that QH becomes unavailable for immediate re-use; - too slowly ... wasting DMA cycles, usually a minor issue except for increased bus contention and power usage; Plus there was an extreme case of "too slowly": a logical error in the IAA watchdog-timer conversion meant that sometimes the unlink never got scheduled. The fix replaces a simple counter with a timestamp derived from the controller's 8 KHz microframe counter, and adjusts the timer usage for some issues associated with HZ being less than 8K. (Based on a patch originally by Alan Stern, and good troubleshooting from Leonid.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Leonid <leonidv11@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ohci_hcd hang: submit vs. rmmod racePete Zaitcev2008-07-221-3/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | If we do rmmod ohci_hcd while an application is doing something, the following may happen: - a control URB completes (in finish_urb) and the ohci's endpoint is set into ED_UNLINK in ed_deschedule - same URB is (re)submitted because of the open/close loop or other such application behaviour - rmmod sets the state to HC_STATE_QUESCING - finish_unlinks happens at next SOF; normally it would set ed into ED_IDLE and immediately call ed_schedule (since URB had extra TDs queued), which sets it into ED_OPER. But the check in ed_schedule makes it fail with -EAGAIN (which is ignored) - from now on we have a dead URB stuck; it cannot even be unlinked because the ed status is not ED_OPER, and thus start_ed_unlink is not invoked. This patch removes the check. In 2.6.25, all callers check for __ACTIVE bit before invoking ed_schedule, which is more appropriate. Alan Stern and David Brownell approved of this (cautiously). Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: make SA1111 OHCI driver SA11x0 specificEric Miao2008-07-221-1/+1
| | | | | | | | | | | | | As RMK pointed out, considering the fact that the _only_ platform with a PXA and SA1111 is the Lubbock, and that SA1111 DMA doesn't work there, (i.e. the SA1111 OHCI doesn't work there) the SA1111 OHCI driver should really be made SA11x0 specific. Signed-off-by: Eric Miao <eric.miao@marvell.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: missing usb_put_hcd to ohci-at91Pete Zaitcev2008-07-221-4/+5
| | | | | | | | | | Looks like usb_put_hcd was missing. Also, make an always-zero function return void. Signed-off-by: Pete Zaitcev <zaitcev@yahoo.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ohci-ppc-of: use linux/of_platform.h instead of asmStephen Rothwell2008-07-221-1/+1
| | | | | | Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: isp1760-hcd.c: make 2 functions staticAdrian Bunk2008-07-221-4/+4
| | | | | | | | | | | This patch makes the following needlessly global functions static: - enqueue_an_ATL_packet() - enqueue_an_INT_packet() Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: usb dev_set_name() instead of dev->bus_idKay Sievers2008-07-221-1/+1
| | | | | | | | | The bus_id field is going away, use the dev_set_name() function to set it properly. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: usb dev_name() instead of dev->bus_idKay Sievers2008-07-2215-29/+29
| | | | | | | | The bus_id field is going away, use the dev_name() function instead. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2008-07-152-2/+6
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (241 commits) [ARM] 5171/1: ep93xx: fix compilation of modules using clocks [ARM] 5133/2: at91sam9g20 defconfig file [ARM] 5130/4: Support for the at91sam9g20 [ARM] 5160/1: IOP3XX: gpio/gpiolib support [ARM] at91: Fix NAND FLASH timings for at91sam9x evaluation kits. [ARM] 5084/1: zylonite: Register AC97 device [ARM] 5085/2: PXA: Move AC97 over to the new central device declaration model [ARM] 5120/1: pxa: correct platform driver names for PXA25x and PXA27x UDC drivers [ARM] 5147/1: pxaficp_ir: drop pxa_gpio_mode calls, as pin setting [ARM] 5145/1: PXA2xx: provide api to control IrDA pins state [ARM] 5144/1: pxaficp_ir: cleanup includes [ARM] pxa: remove pxa_set_cken() [ARM] pxa: allow clk aliases [ARM] Feroceon: don't disable BPU on boot [ARM] Orion: LED support for HP mv2120 [ARM] Orion: add RD88F5181L-FXO support [ARM] Orion: add RD88F5181L-GE support [ARM] Orion: add Netgear WNR854T support [ARM] s3c2410_defconfig: update for current build [ARM] Acer n30: Minor style and indentation fixes. ...
| * [ARM] Merge most of the PXA work for initial mergeRussell King2008-07-151-1/+2
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This includes PXA work up to the SPI changes for the initial merge, since e172274ccc55d20536fbdceb6131f38e288541e0 depends on the SPI tree being merged. Conflicts: arch/arm/configs/em_x270_defconfig arch/arm/configs/xm_x270_defconfig
| | * [ARM] 5080/1: touch PSSR_OTGPH only on pxa27x in ohci-pxa27x and pxa27x_udcPhilipp Zabel2008-06-151-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | and include pxa2xx-regs.h as build fix since PSSR definitions moved from pxa-regs.h into pxa2xx-regs.h. Note: This change is temporary as pxa27x processor specific code will be finally moved elsewhere (both drivers should support pxa3xx, too). Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | Merge branch 'imx' into develRussell King2008-07-103-10/+36
| |\ \ | | | | | | | | | | | | | | | | | | | | Conflicts: arch/arm/mm/Kconfig
| * | | ARM: OMAP: USB: Change omap USB code to use omap_read/write instead of __REGTony Lindgren2008-07-031-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change omap USB code to use omap_read/write instead of __REG for multi-omap Cc: David Brownell <david-b@pacbell.net> Cc: linux-usb@vger.kernel.org Cc: i2c@lm-sensors.org Signed-off-by: Tony Lindgren <tony@atomide.com>
* | | | Fix name of Russell King in various commentsUwe Kleine-König2008-07-114-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch was created by git grep -E -l 'Rus(el|s?e)l King' | xargs -r -t perl -p -i -e 's/Rus(el|s?e)l King/Russell King/g' Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com> Most-Definitely-Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | Revert "USB: don't explicitly reenable root-hub status interrupts"Linus Torvalds2008-07-0619-31/+50
| |/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit e872154921a6b5256a3c412dd69158ac0b135176. Andrey Borzenkov reports that it resulted in a totally hung machine for him when loading the OHCI driver. Extensive netconsole capture with SysRq output shows that modprobe gets stuck in ohci_hub_status_data() when probing and enabling the OHCI controller, see for example http://lkml.org/lkml/2008/7/5/236 for an analysis. The problem appears to be an interrupt flood triggered by the commit that gets reverted, and Andrey confirmed that the revert makes things work for him again. Reported-and-tested-by: Andrey Borzenkov <arvidjaar@mail.ru> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <david-b@pacbell.net> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | USB: ohci - record data toggle after unlinkDavid Brownell2008-07-041-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a problem with OHCI where canceling bulk or interrupt URBs may lose track of the right data toggle. This seems to be a longstanding bug, possibly dating back to the Linux 2.4 kernel, which stayed hidden because (a) about half the time the data toggle bit was correct; (b) canceling such URBs is unusual; and (c) the few drivers which cancel these URBs either [1] do it only as part of shutting down, or [2] have fault recovery logic, which recovers. For those transfer types, the toggle is normally written back into the ED when each TD is retired. But canceling bypasses the mechanism used to retire TDs ... so on average, half the time the toggle bit will be invalid after cancelation. The fix is simple: the toggle state of any canceled TDs are propagated back to the ED in the finish_unlinks function. (Issue found by leonidv11@gmail.com ...) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Leonid <leonidv11@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | USB: ehci - fix timer regressionDavid Brownell2008-07-041-9/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a regression in the EHCI driver's TIMER_IO_WATCHDOG behavior. The patch "USB: EHCI: add separate IAA watchdog timer" changed how that timer is handled, so that short timeouts on the remaining timer (unfortunately, overloaded) would never be used. This takes a more direct approach, reorganizing the code slightly to be explicit about only the I/O watchdog role now being overridable. It also replaces a now-obsolete comment describing older timer behavior. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Leonid <leonidv11@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | OHCI: Fix problem if SM501 and another platform driver is selectedBen Dooks2008-07-041-1/+14
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | If the SM501 and another platform driver, such as the SM501 then we end up defining PLATFORM_DRIVER twice. This patch seperated the SM501 onto a seperate define of SM501_OHCI_DRIVER so that it can be selected without overwriting the original definition. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | USB: isp1760: Assign resource fields before adding hcdNate Case2008-06-121-4/+4
| | | | | | | | | | | | | | | | | | | | | | This fixes the bogus "io mem 0x00000000" message printed during driver init due to hcd->rsrc_start being assigned after the call to usb_add_hcd(). Signed-off-by: Nate Case <ncase@xes-inc.com> Acked-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | usb: r8a66597-hcd: Add support for SH7723 USB hostYoshihiro Shimoda2008-06-091-4/+4
| | | | | | | | | | | | | | | | | | | | R8A66597 is similar to SH7723 USB 2.0 Host/Function module. In addition, the USB of SH7366 is compatible with SH7723. It can support SH7723 USB host by changing Kconfig. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* | isp1760-if iomem annotationsAl Viro2008-06-041-2/+2
| | | | | | | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Revert "USB: EHCI: fix performance regression"Greg Kroah-Hartman2008-05-302-10/+8Star
| | | | | | | | | | | | | | | | | | This reverts commit fa38dfcc56b5f6cce787f9aaa5d1830509213802. It wasn't really a regression and David and Alan are still working through the issues reported. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | USB: EHCI: fix performance regressionAlan Stern2008-05-292-8/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1099) fixes a performance regression in ehci-hcd. The fundamental problem is that queue headers get removed from the schedule too quickly, since the code checks for a counter advancing rather than making an actual time-based check. The latency involved in removing the queue header and then relinking it can severely degrade certain kinds of workloads. The patch replaces a simple counter with a timestamp derived from the controller's uframe value. In addition, the delay for unlinking an idle queue header is increased from 5 ms to 10 ms; since some controllers (nVidia) have a latency of up to 1 ms for unlinking, this reduces the relative impact from 20% to 10%. Finally, a logical error left over from the IAA watchdog-timer conversion is corrected. Now the driver will always either unlink an idle queue header or set up a timer to unlink it later. The old code would sometimes fail to do either. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Cc: Leonid <leonidv11@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | USB: EHCI: fix bug in Iso schedulingAlan Stern2008-05-291-23/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1098) changes the way ehci-hcd schedules its periodic Iso transfers. That the current scheduling code is wrong is clear on the face of it: Sometimes it returns -EL2NSYNC (meaning that an URB couldn't be scheduled because it was submitted too late), but it does this even when the URB_ISO_ASAP flag is set (meaning the URB should be scheduled as soon as possible). The new code properly implements as-soon-as-possible scheduling, assigning the next unexpired slot as the URB's starting point. It also is more careful about checking for Iso URB completion: It doesn't bother to check for activity during frames that are already over, and it allows for the possibility that some of the URB's packets may have raced the hardware when they were submitted and so never got used (the packet status is set to -EXDEV). This fixes problems several people have experienced with USB video applications. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | USB: EHCI: fix remote-wakeup regressionAlan Stern2008-05-292-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1097) fixes a bug in the remote-wakeup handling in ehci-hcd. The driver currently does not keep track of whether the change-suspend feature is enabled for each port; the feature is automatically reset the first time it is read. But recent changes to the hub driver require that the feature be read at least twice in order to work properly. A bit-vector is added for storing the change-suspend feature values. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | USB: EHCI: suppress unwanted error messagesAlan Stern2008-05-299-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1096) fixes an annoying problem: When a full-speed or low-speed device is plugged into an EHCI controller, it fails to enumerate at high speed and then is handed over to the companion controller. But usbcore logs a misleading and unwanted error message when the high-speed enumeration fails. The patch adds a new HCD method, port_handed_over, which asks whether a port has been handed over to a companion controller. If it has, the error message is suppressed. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | USB: EHCI: fix up root-hub TT messAlan Stern2008-05-296-15/+8Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1095) cleans up the HCD glue and several of the EHCI bus-glue files. The ehci->is_tdi_rh_tt flag is redundant, since it means the same thing as the hcd->has_tt flag, so it is removed and the other flag used in its place. Some of the bus-glue files didn't get the relinquish_port method added to their hc_driver structures. Although that routine currently doesn't do anything for controllers with an integrated TT, in the future it might. So the patch adds it where it is missing. Lastly, some of the bus-glue files have erroneous entries for their hc_driver's suspend and resume methods. These method pointers are specific to PCI and shouldn't be used otherwise. (The patch also includes an invisible whitespace fix.) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <dbrownell@users.sourceforge.net>
* | USB: ehci-orion: the Orion EHCI root hub does have a Transaction TranslatorLennert Buytenhek2008-05-201-0/+2
|/ | | | | | | | | | | | | | | | | Commit 7329e211b987a493cbcfca0e98c60eb108ab42df ("USB: root hubs don't lie about their number of TTs") requires the various platform EHCI glue modules to set ->has_tt if the root hub has a Transaction Translator. The Orion EHCI root hub does have a Transaction Translator, so set ->has_tt in ehci_orion_setup(). This fixes oopsing on plugging in a low speed device. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Acked-by: Nicolas Pitre <nico@marvell.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: fix compile warning in isp1760Sebastian Siewior2008-05-141-1/+1
| | | | | | | | drivers/usb/host/isp1760-if.c:275: warning: 'ret' is used uninitialized in this function Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: fix integer as NULL pointer warnings found by sparseHarvey Harrison2008-05-141-1/+1
| | | | | | | | | | | | | drivers/usb/host/ohci-sm501.c:93:24: warning: Using plain integer as NULL pointer drivers/usb/gadget/amd5536udc.c:3254:9: warning: Using plain integer as NULL pointer drivers/usb/gadget/amd5536udc.c:3267:9: warning: Using plain integer as NULL pointer drivers/usb/gadget/amd5536udc.c:3277:9: warning: Using plain integer as NULL pointer drivers/usb/gadget/amd5536udc.c:3285:9: warning: Using plain integer as NULL pointer drivers/usb/gadget/amd5536udc.c:3293:9: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: isp1760: fix printk formatRandy Dunlap2008-05-141-2/+2
| | | | | | | | | | | Fix printk format warnings in isp1760 (in linux-next): next-20080430/drivers/usb/host/isp1760-hcd.c:994: warning: format '%d' expects type 'int', but argument 6 has type 'size_t' next-20080430/drivers/usb/host/isp1760-hcd.c:1092: warning: format '%d' expects type 'int', but argument 3 has type 'size_t' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: Sparc build fix, make USB_ISP1760_OF depend on PPC_OFDavid S. Miller2008-05-071-1/+1
| | | | | | | | Sparc doesn't have some of the OF interfaces this driver wants to use. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* USB: UHCI: disable remote wakeup when it's not neededAlan Stern2008-05-022-18/+61
| | | | | | | | | | | | | | | | | This patch (as1084b) fixes the way uhci-hcd handles polling and remote wakeups for its root hubs. When remote wakeup is disabled, neither interrupts nor polling should be enabled during a root-hub suspend. Likewise, if interrupts are enabled during suspend then polling isn't needed. Furthermore the EGSM (Enter Global Suspend Mode) bit shouldn't be set in the Command register unless remote wakeup is enabled. Apparently some controllers will issue a remote-wakeup interrupt whenever EGSM is on, even if Resume-Detect interrupts are supposedly disabled. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: OHCI: work around bogus compiler warningAlan Stern2008-05-021-1/+1
| | | | | | | | | The patch (as1086) works around a bogus "uninitialized variable" warning generated by some versions of GCC. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: add Cypress c67x00 OTG controller HCD driverPeter Korsgaard2008-05-021-0/+13
| | | | | | | | This patch adds HCD support for the Cypress c67x00 family of devices. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ISP1760 HCD driverSebastian Siewior2008-05-025-1/+2764
| | | | | | | | | | This driver has been written from scratch and supports the ISP1760. ISP1761 might (should) work as well but the OTG isn't supported. Also ISO packets are not. However, it works on my little PowerPC board. Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: use get/put_unaligned_* helpersHarvey Harrison2008-04-292-3/+3
| | | | | | | | | | Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* usb: use non-racy method for proc entries creationDenis V. Lunev2008-04-291-9/+1Star
| | | | | | | | | | | | Use proc_create()/proc_create_data() to make sure that ->proc_fops and ->data be setup before gluing PDE to main tree. Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/usb annotations and fixesAl Viro2008-04-285-8/+8
| | | | | | | | | | | | * endianness annotations * endianness fixes * missing get_unaligned/put_unaligned It's pretty much all over the place, changes to different files are independent. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Serial-parts-Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* USB: replace remaining __FUNCTION__ occurrencesHarvey Harrison2008-04-256-12/+12
| | | | | | | | __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: fix compile problems in ehci-hcdAlan Stern2008-04-252-2/+3
| | | | | | | | | | | | | | | This patch (as1072) fixes some recently-introduced compile problems that show up in ehci-hcd when CONFIG_PM is turned off. PORT_WAKE_BITS needs to be defined always. ehci_port_power() is called during initialization by all the EHCI variants other than the PCI version, in which it is "defined but not used". So add a call to it. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ehci: qh_completions cleanup and bugfixDavid Brownell2008-04-251-18/+16Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Simplify processing of completed qtds, and correct handling of short reads, by removing two state variables: - "qtd_status" wasn't needed. The current URB's status is either OK (-EINPROGRESS) or some fault status. Once a fault appears, the queue halts and any later QTDs are immediately removed, so no temporary status is needed. (Or for typical short reads, it's not treated as a fault, so no queue halt is needed.) - "do_status" was erroneous. Because of how the queue is set up, short control reads can (and should!) be treated like full size reads, and cleaned up the usual way. The status stage will be executed transparently, and usbcore handles the choice of whether to report this status as unexected. The "do_status" problem caused a rather perplexing timing-dependent problem with usbtest case 10. Sometimes it would make the controller skip a dozen transactions while (wrongly) trying to clean up after a short transfer. Fortunately, removing a dcache contention issue made this become trivial to reproduce (on one test rig), so enough clues finally presented themselves ... I think this has been around for a very long time, but was worsened by recent urb->status changes. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: don't explicitly reenable root-hub status interruptsAlan Stern2008-04-2519-50/+31Star
| | | | | | | | | | | | | | | | | This patch (as1069b) changes the way OHCI root-hub status-change interrupts are enabled. Currently a special HCD method, hub_irq_enable(), is called when the hub driver is finished using a root hub. This approach turns out to be subject to races, resulting in unnecessary polling. The patch does away with the method entirely. Instead, the driver automatically enables the RHSC interrupt when no more status changes are present. This scheme is safe with controllers using level-triggered semantics for their interrupt flags. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: OHCI: turn off RD when remote wakeup is disabledAlan Stern2008-04-251-1/+2
| | | | | | | | | | | | | This patch (as1068b) disables the RD interrupt flag when an OHCI root hub is suspended with remote wakeup disabled. Although the spec clearly states that this flag permits the controller to issue an interrupt when a resume request from downstream is detected and not when a local status change occurs, some controllers mistakenly use it for both types of event. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: HCDs use the do_remote_wakeup flagAlan Stern2008-04-255-29/+18Star
| | | | | | | | | | | | | | | | | | | | | | | | When a USB device is suspended, whether or not it is enabled for remote wakeup depends on the device_may_wakeup() setting. The setting is then saved in the do_remote_wakeup flag. Later on, however, the device_may_wakeup() value can change because of user activity. So when testing whether a suspended device is or should be enabled for remote wakeup, we should always test do_remote_wakeup instead of device_may_wakeup(). This patch (as1076) makes that change for root hubs in several places. The patch also adjusts uhci-hcd so that when an autostopped controller is suspended, the remote wakeup setting agrees with the value recorded in the root hub's do_remote_wakeup flag. And the patch adjusts ehci-hcd so that wakeup events on selectively suspended ports (i.e., the bus itself isn't suspended) don't turn on the PME# wakeup signal. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ehci: qh/qtd cleanup commentsDavid Brownell2008-04-251-10/+40
| | | | | | | | | | | | | | | Provide better comments about qh_completions() and QTD handling. That code can be *VERY* confusing, since it's evolved over a few years to cope with both hardware races and silicon quirks. Remove two unlikely() annotations that match the GCC defaults (and are thus pointless); add an "else" to highlight code flow. This patch doesn't change driver behavior. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: r8a66597-hcd: Add support for SH7366 USB hostYoshihiro Shimoda2008-04-253-37/+129
| | | | | | | | | R8A66597 is similar to SH7366 USB 2.0 Host/Function module. It can support SH7366 USB host by changing several R8A66597 code. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-11-13 01:28:22 +0100