summaryrefslogtreecommitdiffstats
path: root/drivers/usb
Commit message (Collapse)AuthorAgeFilesLines
* xhci: Fix crash if scatter gather is used with Immediate Data Transfer (IDT).Mathias Nyman2019-07-251-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | A second regression was found in the immediate data transfer (IDT) support which was added to 5.2 kernel IDT is used to transfer small amounts of data (up to 8 bytes) in the field normally used for data dma address, thus avoiding dma mapping. If the data was not already dma mapped, then IDT support assumed data was in urb->transfer_buffer, and did not take into accound that even small amounts of data (8 bytes) can be in a scatterlist instead. This caused a NULL pointer dereference when sg_dma_len() was used with non-dma mapped data. Solve this by not using IDT if scatter gather buffer list is used. Fixes: 33e39350ebd2 ("usb: xhci: add Immediate Data Transfer support") Cc: <stable@vger.kernel.org> # v5.2 Reported-by: Maik Stohn <maik.stohn@seal-one.com> Tested-by: Maik Stohn <maik.stohn@seal-one.com> CC: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/1564044861-1445-1-git-send-email-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: usb251xb: Reallow swap-dx-lanes to apply to the upstream portLucas Stach2019-07-251-6/+7
| | | | | | | | | | | | | | | | | | | | This is a partial revert of 73d31def1aab "usb: usb251xb: Create a ports field collector method", which broke a existing devicetree (arch/arm64/boot/dts/freescale/imx8mq.dtsi). There is no reason why the swap-dx-lanes property should not apply to the upstream port. The reason given in the breaking commit was that it's inconsitent with respect to other port properties, but in fact it is not. All other properties which only apply to the downstream ports explicitly reject port 0, so there is pretty strong precedence that the driver referred to the upstream port as port 0. So there is no inconsistency in this property at all, other than the swapping being also applicable to the upstream port. CC: stable@vger.kernel.org #5.2 Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Link: https://lore.kernel.org/r/20190719084407.28041-3-l.stach@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Revert "usb: usb251xb: Add US port lanes inversion property"Lucas Stach2019-07-251-2/+0Star
| | | | | | | | | | | This property isn't needed and not yet used anywhere. The swap-dx-lanes property is perfectly fine for doing the swap on the upstream port lanes. CC: stable@vger.kernel.org #5.2 Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Link: https://lore.kernel.org/r/20190719084407.28041-2-l.stach@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: wusbcore: fix unbalanced get/put cluster_idPhong Tran2019-07-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | syzboot reported that https://syzkaller.appspot.com/bug?extid=fd2bd7df88c606eea4ef There is not consitency parameter in cluste_id_get/put calling. In case of getting the id with result is failure, the wusbhc->cluster_id will not be updated and this can not be used for wusb_cluster_id_put(). Tested report https://groups.google.com/d/msg/syzkaller-bugs/0znZopp3-9k/oxOrhLkLEgAJ Reproduce and gdb got the details: 139 addr = wusb_cluster_id_get(); (gdb) n 140 if (addr == 0) (gdb) print addr $1 = 254 '\376' (gdb) n 142 result = __hwahc_set_cluster_id(hwahc, addr); (gdb) print result $2 = -71 (gdb) break wusb_cluster_id_put Breakpoint 3 at 0xffffffff836e3f20: file drivers/usb/wusbcore/wusbhc.c, line 384. (gdb) s Thread 2 hit Breakpoint 3, wusb_cluster_id_put (id=0 '\000') at drivers/usb/wusbcore/wusbhc.c:384 384 id = 0xff - id; (gdb) n 385 BUG_ON(id >= CLUSTER_IDS); (gdb) print id $3 = 255 '\377' Reported-by: syzbot+fd2bd7df88c606eea4ef@syzkaller.appspotmail.com Signed-off-by: Phong Tran <tranmanphong@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190724020601.15257-1-tranmanphong@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb/hcd: Fix a NULL vs IS_ERR() bug in usb_hcd_setup_local_mem()Dan Carpenter2019-07-251-2/+2
| | | | | | | | | | | The devm_memremap() function doesn't return NULL, it returns error pointers. Fixes: b0310c2f09bb ("USB: use genalloc for USB HCs with local memory") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://lore.kernel.org/r/20190607135709.GC16718@mwanda Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb-storage: Add a limitation for blk_queue_max_hw_sectors()Yoshihiro Shimoda2019-07-251-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes an issue that the following error happens on swiotlb environment: xhci-hcd ee000000.usb: swiotlb buffer is full (sz: 524288 bytes), total 32768 (slots), used 1338 (slots) On the kernel v5.1, block settings of a usb-storage with SuperSpeed were the following so that the block layer will allocate buffers up to 64 KiB, and then the issue didn't happen. max_segment_size = 65536 max_hw_sectors_kb = 1024 After the commit 09324d32d2a0 ("block: force an unlimited segment size on queues with a virt boundary") is applied, the block settings are the following. So, the block layer will allocate buffers up to 1024 KiB, and then the issue happens: max_segment_size = 4294967295 max_hw_sectors_kb = 1024 To fix the issue, the usb-storage driver checks the maximum size of a mapping for the device and then adjusts the max_hw_sectors_kb if required. After this patch is applied, the block settings will be the following, and then the issue doesn't happen. max_segment_size = 4294967295 max_hw_sectors_kb = 256 Fixes: 09324d32d2a0 ("block: force an unlimited segment size on queues with a virt boundary") Cc: stable <stable@vger.kernel.org> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/1563793105-20597-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: pci-quirks: Minor cleanup for AMD PLL quirkRyan Kennedy2019-07-255-19/+21
| | | | | | | | | | | | | | usb_amd_find_chipset_info() is used for chipset detection for several quirks. It is strange that its return value indicates the need for the PLL quirk, which means it is often ignored. This patch adds a function specifically for checking the PLL quirk like the other ones. Additionally, rename probe_result to something more appropriate. Signed-off-by: Ryan Kennedy <ryan5544@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20190704153529.9429-3-ryan5544@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: pci-quirks: Correct AMD PLL quirk detectionRyan Kennedy2019-07-251-12/+19
| | | | | | | | | | | | | | | | | The AMD PLL USB quirk is incorrectly enabled on newer Ryzen chipsets. The logic in usb_amd_find_chipset_info currently checks for unaffected chipsets rather than affected ones. This broke once a new chipset was added in e788787ef. It makes more sense to reverse the logic so it won't need to be updated as new chipsets are added. Note that the core of the workaround in usb_amd_quirk_pll does correctly check the chipset. Signed-off-by: Ryan Kennedy <ryan5544@gmail.com> Fixes: e788787ef4f9 ("usb:xhci:Add quirk for Certain failing HP keyboard on reset after resume") Cc: stable <stable@vger.kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20190704153529.9429-2-ryan5544@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge branch 'work.mount0' of ↵Linus Torvalds2019-07-191-6/+15
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs mount updates from Al Viro: "The first part of mount updates. Convert filesystems to use the new mount API" * 'work.mount0' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits) mnt_init(): call shmem_init() unconditionally constify ksys_mount() string arguments don't bother with registering rootfs init_rootfs(): don't bother with init_ramfs_fs() vfs: Convert smackfs to use the new mount API vfs: Convert selinuxfs to use the new mount API vfs: Convert securityfs to use the new mount API vfs: Convert apparmorfs to use the new mount API vfs: Convert openpromfs to use the new mount API vfs: Convert xenfs to use the new mount API vfs: Convert gadgetfs to use the new mount API vfs: Convert oprofilefs to use the new mount API vfs: Convert ibmasmfs to use the new mount API vfs: Convert qib_fs/ipathfs to use the new mount API vfs: Convert efivarfs to use the new mount API vfs: Convert configfs to use the new mount API vfs: Convert binfmt_misc to use the new mount API convenience helper: get_tree_single() convenience helper get_tree_nodev() vfs: Kill sget_userns() ...
| * vfs: Convert gadgetfs to use the new mount APIDavid Howells2019-07-051-6/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert the gadgetfs filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> cc: linux-usb@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* | Merge branch 'i2c/for-5.3' of ↵Linus Torvalds2019-07-163-4/+125
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "New stuff from the I2C world: - in the core, getting irqs from ACPI is now similar to OF - new driver for MediaTek MT7621/7628/7688 SoCs - bcm2835, i801, and tegra drivers got some more attention - GPIO API cleanups - cleanups in the core headers - lots of usual driver updates" * 'i2c/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (74 commits) i2c: mt7621: Fix platform_no_drv_owner.cocci warnings i2c: cpm: remove casting dma_alloc dt-bindings: i2c: sun6i-p2wi: Fix the binding example dt-bindings: i2c: mv64xxx: Fix the example compatible i2c: i801: Documentation update i2c: i801: Add support for Intel Tiger Lake i2c: i801: Fix PCI ID sorting dt-bindings: i2c-stm32: document optional dmas i2c: i2c-stm32f7: Add I2C_SMBUS_I2C_BLOCK_DATA support i2c: core: Tidy up handling of init_irq i2c: core: Move ACPI gpio IRQ handling into i2c_acpi_get_irq i2c: core: Move ACPI IRQ handling to probe time i2c: acpi: Factor out getting the IRQ from ACPI i2c: acpi: Use available IRQ helper functions i2c: core: Allow whole core to use i2c_dev_irq_from_resources eeprom: at24: modify a comment referring to platform data dt-bindings: i2c: omap: Add new compatible for J721E SoCs dt-bindings: i2c: mv64xxx: Add YAML schemas dt-bindings: i2c: sun6i-p2wi: Add YAML schemas i2c: mt7621: Add MediaTek MT7621/7628/7688 I2C driver ...
| * | usb: typec: ucsi: ccg: add runtime pm workaroundAjay Gupta2019-06-081-4/+76
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cypress USB Type-C CCGx controller firmware version 3.1.10 (which is being used in many NVIDIA GPU cards) has known issue of not triggering interrupt when a USB device is hot plugged to runtime resume the controller. If any GPU card gets latest kernel with runtime pm support but does not get latest fixed firmware then also it should continue to work and therefore a workaround is required to check for any connector change event. The workaround is that i2c bus driver will call pm_request_resume() to runtime resume ucsi_ccg driver. CCG driver will call the ISR for any connector change event for NVIDIA GPU card and only if it has old CCG firmware with the known issue. Signed-off-by: Ajay Gupta <ajayg@nvidia.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | usb: typec: ucsi: ccg: enable runtime pm supportAjay Gupta2019-06-083-0/+49
| |/ | | | | | | | | | | | | | | | | | | | | The change enables runtime pm support to UCSI CCG driver. Added ucsi_resume() function to enable notification after system reusme. Exported both ucsi_resume() and ucsi_send_command() symbols in ucsi.c for modular build. Signed-off-by: Ajay Gupta <ajayg@nvidia.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* | Merge tag 'dma-mapping-5.3' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds2019-07-1311-64/+140
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull dma-mapping updates from Christoph Hellwig: - move the USB special case that bounced DMA through a device bar into the USB code instead of handling it in the common DMA code (Laurentiu Tudor and Fredrik Noring) - don't dip into the global CMA pool for single page allocations (Nicolin Chen) - fix a crash when allocating memory for the atomic pool failed during boot (Florian Fainelli) - move support for MIPS-style uncached segments to the common code and use that for MIPS and nios2 (me) - make support for DMA_ATTR_NON_CONSISTENT and DMA_ATTR_NO_KERNEL_MAPPING generic (me) - convert nds32 to the generic remapping allocator (me) * tag 'dma-mapping-5.3' of git://git.infradead.org/users/hch/dma-mapping: (29 commits) dma-mapping: mark dma_alloc_need_uncached as __always_inline MIPS: only select ARCH_HAS_UNCACHED_SEGMENT for non-coherent platforms usb: host: Fix excessive alignment restriction for local memory allocations lib/genalloc.c: Add algorithm, align and zeroed family of DMA allocators nios2: use the generic uncached segment support in dma-direct nds32: use the generic remapping allocator for coherent DMA allocations arc: use the generic remapping allocator for coherent DMA allocations dma-direct: handle DMA_ATTR_NO_KERNEL_MAPPING in common code dma-direct: handle DMA_ATTR_NON_CONSISTENT in common code dma-mapping: add a dma_alloc_need_uncached helper openrisc: remove the partial DMA_ATTR_NON_CONSISTENT support arc: remove the partial DMA_ATTR_NON_CONSISTENT support arm-nommu: remove the partial DMA_ATTR_NON_CONSISTENT support ARM: dma-mapping: allow larger DMA mask than supported dma-mapping: truncate dma masks to what dma_addr_t can hold iommu/dma: Apply dma_{alloc,free}_contiguous functions dma-remap: Avoid de-referencing NULL atomic_pool MIPS: use the generic uncached segment support in dma-direct dma-direct: provide generic support for uncached kernel segments au1100fb: fix DMA API abuse ...
| * | usb: host: Fix excessive alignment restriction for local memory allocationsFredrik Noring2019-06-283-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PAGE_SHIFT alignment restriction to devm_gen_pool_create() quickly exhaust local memory because most allocations are much smaller than PAGE_SIZE. This causes USB device failures such as usb 1-2.1: reset full-speed USB device number 4 using sm501-usb sd 1:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x03 driverbyte=0x00 sd 1:0:0:0: [sda] tag#0 CDB: opcode=0x28 28 00 00 00 08 7c 00 00 f0 00 print_req_error: I/O error, dev sda, sector 2172 flags 80700 when trying to boot from the SM501 USB controller on SH4 with QEMU. Align allocations as required but not necessarily much more than that. The HCCA, TD and ED structures align with 256, 32 and 16 byte memory boundaries, as specified by the Open HCI[1]. The min_alloc_order argument to devm_gen_pool_create is now somewhat arbitrarily set to 4 (16 bytes). Perhaps it could be somewhat lower for general buffer allocations. Reference: [1] "Open Host Controller Interface Specification for USB", release 1.0a, Compaq, Microsoft, National Semiconductor, 1999, pp. 16, 19, 33. Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Fredrik Noring <noring@nocrew.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Christoph Hellwig <hch@lst.de>
| * | USB: drop HCD_LOCAL_MEM flagLaurentiu Tudor2019-06-038-21/+17Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the addition of the local memory allocator, the HCD_LOCAL_MEM flag can be dropped and the checks against it replaced with a check for the localmem_pool ptr being initialized. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Tested-by: Fredrik Noring <noring@nocrew.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
| * | usb: host: ohci-tmio: init genalloc for local memoryLaurentiu Tudor2019-06-031-8/+5Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In preparation for dropping the existing "coherent" dma mem declaration APIs, replace the current dma_declare_coherent_memory() based mechanism with the creation of a genalloc pool that will be used in the OHCI subsystem as replacement for the DMA APIs. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
| * | usb: host: ohci-sm501: init genalloc for local memoryLaurentiu Tudor2019-06-031-27/+20Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In preparation for dropping the existing "coherent" dma mem declaration APIs, replace the current dma_declare_coherent_memory() based mechanism with the creation of a genalloc pool that will be used in the OHCI subsystem as replacement for the DMA APIs. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
| * | USB: use genalloc for USB HCs with local memoryLaurentiu Tudor2019-06-036-9/+97
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For HCs that have local memory, replace the current DMA API usage with a genalloc generic allocator to manage the mappings for these devices. To help users, introduce a new HCD API, usb_hcd_setup_local_mem() that will setup up the genalloc backing up the device local memory. It will be used in subsequent patches. This is in preparation for dropping the existing "coherent" dma mem declaration APIs. The current implementation was relying on a short circuit in the DMA API that in the end, was acting as an allocator for these type of devices. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Tested-by: Fredrik Noring <noring@nocrew.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
* | Merge tag 'driver-core-5.3-rc1' of ↵Linus Torvalds2019-07-124-8/+8
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core and debugfs updates from Greg KH: "Here is the "big" driver core and debugfs changes for 5.3-rc1 It's a lot of different patches, all across the tree due to some api changes and lots of debugfs cleanups. Other than the debugfs cleanups, in this set of changes we have: - bus iteration function cleanups - scripts/get_abi.pl tool to display and parse Documentation/ABI entries in a simple way - cleanups to Documenatation/ABI/ entries to make them parse easier due to typos and other minor things - default_attrs use for some ktype users - driver model documentation file conversions to .rst - compressed firmware file loading - deferred probe fixes All of these have been in linux-next for a while, with a bunch of merge issues that Stephen has been patient with me for" * tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (102 commits) debugfs: make error message a bit more verbose orangefs: fix build warning from debugfs cleanup patch ubifs: fix build warning after debugfs cleanup patch driver: core: Allow subsystems to continue deferring probe drivers: base: cacheinfo: Ensure cpu hotplug work is done before Intel RDT arch_topology: Remove error messages on out-of-memory conditions lib: notifier-error-inject: no need to check return value of debugfs_create functions swiotlb: no need to check return value of debugfs_create functions ceph: no need to check return value of debugfs_create functions sunrpc: no need to check return value of debugfs_create functions ubifs: no need to check return value of debugfs_create functions orangefs: no need to check return value of debugfs_create functions nfsd: no need to check return value of debugfs_create functions lib: 842: no need to check return value of debugfs_create functions debugfs: provide pr_fmt() macro debugfs: log errors when something goes wrong drivers: s390/cio: Fix compilation warning about const qualifiers drivers: Add generic helper to match by of_node driver_find_device: Unify the match function with class_find_device() bus_find_device: Unify the match callback with class_find_device ...
| * | bus_find_device: Unify the match callback with class_find_deviceSuzuki K Poulose2019-06-244-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is an arbitrary difference between the prototypes of bus_find_device() and class_find_device() preventing their callers from passing the same pair of data and match() arguments to both of them, which is the const qualifier used in the prototype of class_find_device(). If that qualifier is also used in the bus_find_device() prototype, it will be possible to pass the same match() callback function to both bus_find_device() and class_find_device(), which will allow some optimizations to be made in order to avoid code duplication going forward. Also with that, constify the "data" parameter as it is passed as a const to the match function. For this reason, change the prototype of bus_find_device() to match the prototype of class_find_device() and adjust its callers to use the const qualifier in accordance with the new prototype of it. Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Andreas Noever <andreas.noever@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Corey Minyard <minyard@acm.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David Kershner <david.kershner@unisys.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: David Airlie <airlied@linux.ie> Cc: Felipe Balbi <balbi@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Harald Freudenberger <freude@linux.ibm.com> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jonathan Cameron <jic23@kernel.org> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: Len Brown <lenb@kernel.org> Cc: Mark Brown <broonie@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michael Jamet <michael.jamet@intel.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Peter Oberparleiter <oberpar@linux.ibm.com> Cc: Sebastian Ott <sebott@linux.ibm.com> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Yehezkel Bernat <YehezkelShB@gmail.com> Cc: rafael@kernel.org Acked-by: Corey Minyard <minyard@acm.org> Acked-by: David Kershner <david.kershner@unisys.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> # for the I2C parts Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | Merge tag 'usb-5.3-rc1' of ↵Linus Torvalds2019-07-12114-683/+1196
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / PHY updates from Greg KH: "Here is the big USB and PHY driver pull request for 5.3-rc1. Lots of stuff here, all of which has been in linux-next for a while with no reported issues. Nothing is earth-shattering, just constant forward progress for more devices supported and cleanups and small fixes: - USB gadget driver updates and fixes - new USB gadget driver for some hardware, followed by a quick revert of those patches as they were not ready to be merged... - PHY driver updates - Lots of new driver additions and cleanups with a few fixes mixed in" * tag 'usb-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (145 commits) Revert "usb: gadget: storage: Remove warning message" Revert "dt-bindings: add binding for USBSS-DRD controller." Revert "usb:gadget Separated decoding functions from dwc3 driver." Revert "usb:gadget Patch simplify usb_decode_set_clear_feature function." Revert "usb:gadget Simplify usb_decode_get_set_descriptor function." Revert "usb:cdns3 Add Cadence USB3 DRD Driver" Revert "usb:cdns3 Fix for stuck packets in on-chip OUT buffer." usb :fsl: Change string format for errata property usb: host: Stops USB controller init if PLL fails to lock usb: linux/fsl_device: Add platform member has_fsl_erratum_a006918 usb: phy: Workaround for USB erratum-A005728 usb: fsl: Set USB_EN bit to select ULPI phy usb: Handle USB3 remote wakeup for LPM enabled devices correctly drivers/usb/typec/tps6598x.c: fix 4CC cmd write drivers/usb/typec/tps6598x.c: fix portinfo width usb: storage: scsiglue: Do not skip VPD if try_vpd_pages is set usb: renesas_usbhs: add a workaround for a race condition of workqueue usb: gadget: udc: renesas_usb3: remove redundant assignment to ret usb: dwc2: use a longer AHB idle timeout in dwc2_core_reset() USB: gadget: function: fix issue Unneeded variable: "value" ...
| * \ \ Merge tag 'usb-ci-v5.3-rc1' of ↵Greg Kroah-Hartman2019-07-054-11/+39
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-next - Add imx7ulp support. - Some tiny improvements, no function change. * tag 'usb-ci-v5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb: usb: chipidea: msm: Use devm_platform_ioremap_resource() usb: chipidea: imx: Use devm_platform_ioremap_resource() usb: chipidea: Use dev_err() instead of pr_err() usb: chipidea: imx: "fsl,usbphy" phandle is not mandatory now usb: chipidea: imx: add imx7ulp support
| | * | | usb: chipidea: msm: Use devm_platform_ioremap_resource()Fabio Estevam2019-06-141-3/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use devm_platform_ioremap_resource() to simplify the code a bit. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
| | * | | usb: chipidea: imx: Use devm_platform_ioremap_resource()Fabio Estevam2019-06-141-3/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use devm_platform_ioremap_resource() to simplify the code a bit. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
| | * | | usb: chipidea: Use dev_err() instead of pr_err()Fabio Estevam2019-06-141-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | dev_err() is more appropriate for printing error messages inside drivers, so switch to dev_err(). While at it also add the missing newlines. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
| | * | | usb: chipidea: imx: "fsl,usbphy" phandle is not mandatory nowPeter Chen2019-06-141-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the chipidea common code support get the USB PHY phandle from "phys", the glue layer is not mandatory to get the "fsl,usbphy" phandle any more. Signed-off-by: Peter Chen <peter.chen@nxp.com>
| | * | | usb: chipidea: imx: add imx7ulp supportPeter Chen2019-06-142-1/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In this commit, we add CI_HDRC_PMQOS to avoid system entering idle, at imx7ulp, if the system enters idle, the DMA will stop, so the USB transfer can't work at this case. Signed-off-by: Peter Chen <peter.chen@nxp.com>
| * | | | Revert "usb: gadget: storage: Remove warning message"Greg Kroah-Hartman2019-07-042-16/+6Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit e70b3f5da00119e057b7faa557753fee7f786f17. EJ writes: Thinh found this patch might cause a failure in USB CV TD 9.13 Set Configuration Test. We are trying to fix it. Could you please defer the merging of this patch until we fix it? So am now dropping it. Reported-by: EJ Hsu <ejh@nvidia.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | Revert "usb:gadget Separated decoding functions from dwc3 driver."Greg Kroah-Hartman2019-07-044-270/+253Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 3db1b636c07e15ff7410db782832dc2e7ffd2bce. It's broken. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Felipe Balbi <balbi@kernel.org> Cc: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | Revert "usb:gadget Patch simplify usb_decode_set_clear_feature function."Greg Kroah-Hartman2019-07-041-43/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit ca888ce7495e4e1578c86c37b0c82f6709da477c. It's broken. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Felipe Balbi <balbi@kernel.org> Cc: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | Revert "usb:gadget Simplify usb_decode_get_set_descriptor function."Greg Kroah-Hartman2019-07-041-58/+55Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit c2af6b07803ebd099950cd608f404a7bff9037b2. It's broken. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Felipe Balbi <balbi@kernel.org> Cc: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | Revert "usb:cdns3 Add Cadence USB3 DRD Driver"Greg Kroah-Hartman2019-07-0419-6916/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 8bc1901ca7b07d864fca11461b3875b31f949765. It's broken. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Felipe Balbi <balbi@kernel.org> Cc: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | Revert "usb:cdns3 Fix for stuck packets in on-chip OUT buffer."Greg Kroah-Hartman2019-07-042-341/+2Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 573aff747ee350a0541c3a24cacd92a286fb9522. It's broken. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Felipe Balbi <balbi@kernel.org> Cc: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | usb :fsl: Change string format for errata propertyNikhil Badola2019-07-031-5/+2Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove USB errata checking code from driver. Applicability of erratum is retrieved by reading corresponding property in device tree. This property is written during device tree fixup. Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Link: https://lore.kernel.org/r/20190624072219.15258-5-yinbo.zhu@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | usb: host: Stops USB controller init if PLL fails to lockRamneek Mehresh2019-07-032-1/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | USB erratum-A006918 workaround tries to start internal PHY inside uboot (when PLL fails to lock). However, if the workaround also fails, then USB initialization is also stopped inside Linux. Erratum-A006918 workaround failure creates "fsl,erratum_a006918" node in device-tree. Presence of this node in device-tree is used to stop USB controller initialization in Linux Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Suresh Gupta <suresh.gupta@freescale.com> Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Link: https://lore.kernel.org/r/20190624072219.15258-4-yinbo.zhu@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | usb: phy: Workaround for USB erratum-A005728Suresh Gupta2019-07-032-11/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PHY_CLK_VALID bit for UTMI PHY in USBDR does not set even if PHY is providing valid clock. Workaround for this involves resetting of PHY and check PHY_CLK_VALID bit multiple times. If PHY_CLK_VALID bit is still not set even after 5 retries, it would be safe to deaclare that PHY clock is not available. This erratum is applicable for USBDR less then ver 2.4. Signed-off-by: Suresh Gupta <B42813@freescale.com> Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Link: https://lore.kernel.org/r/20190624072219.15258-2-yinbo.zhu@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | usb: fsl: Set USB_EN bit to select ULPI phyNikhil Badola2019-07-031-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Set USB_EN bit to select ULPI phy for USB controller version 2.5 Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Link: https://lore.kernel.org/r/20190624072219.15258-1-yinbo.zhu@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | usb: Handle USB3 remote wakeup for LPM enabled devices correctlyLee, Chiasheng2019-07-031-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With Link Power Management (LPM) enabled USB3 links transition to low power U1/U2 link states from U0 state automatically. Current hub code detects USB3 remote wakeups by checking if the software state still shows suspended, but the link has transitioned from suspended U3 to enabled U0 state. As it takes some time before the hub thread reads the port link state after a USB3 wake notification, the link may have transitioned from U0 to U1/U2, and wake is not detected by hub code. Fix this by handling U1/U2 states in the same way as U0 in USB3 wakeup handling This patch should be added to stable kernels since 4.13 where LPM was kept enabled during suspend/resume Cc: <stable@vger.kernel.org> # v4.13+ Signed-off-by: Lee, Chiasheng <chiasheng.lee@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | drivers/usb/typec/tps6598x.c: fix 4CC cmd writeNikolaus Voss2019-07-031-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Writing 4CC commands with tps6598x_write_4cc() already has a pointer arg, don't reference it when using as arg to tps6598x_block_write(). Correcting this enforces the constness of the pointer to propagate to tps6598x_block_write(), so add the const qualifier there to avoid the warning. Fixes: 0a4c005bd171 ("usb: typec: driver for TI TPS6598x USB Power Delivery controllers") Signed-off-by: Nikolaus Voss <nikolaus.voss@loewensteinmedical.de> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | drivers/usb/typec/tps6598x.c: fix portinfo widthNikolaus Voss2019-07-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Portinfo bit field is 3 bits wide, not 2 bits. This led to a wrong driver configuration for some tps6598x configurations. Fixes: 0a4c005bd171 ("usb: typec: driver for TI TPS6598x USB Power Delivery controllers") Signed-off-by: Nikolaus Voss <nikolaus.voss@loewensteinmedical.de> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | usb: storage: scsiglue: Do not skip VPD if try_vpd_pages is setMarcos Paulo de Souza2019-07-031-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If BLIST_TRY_VPD_PAGES is set for a device, even for an USB, it should be honored, so only set skip_vpd_pages is try_vpd_pages is not set. Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | Merge tag 'usb-for-v5.3-part2' of ↵Greg Kroah-Hartman2019-07-0329-270/+7620
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: USB: more changes for v5.3 merge window Turns out a few more important changes came about. We have the new Cadence DRD Driver being added here and that's the biggest, most important part. Together with that we have suport for new imx7ulp phy. Support for TigerLake Devices on dwc3. Also a couple important fixes which weren't completed in time for the -rc cycle. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> * tag 'usb-for-v5.3-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: usb: renesas_usbhs: add a workaround for a race condition of workqueue usb: gadget: udc: renesas_usb3: remove redundant assignment to ret usb: dwc2: use a longer AHB idle timeout in dwc2_core_reset() USB: gadget: function: fix issue Unneeded variable: "value" usb: phy: phy-mxs-usb: add imx7ulp support doc: dt-binding: mxs-usb-phy: add compatible for 7ulp usb:cdns3 Fix for stuck packets in on-chip OUT buffer. usb:cdns3 Add Cadence USB3 DRD Driver usb:gadget Simplify usb_decode_get_set_descriptor function. usb:gadget Patch simplify usb_decode_set_clear_feature function. usb:gadget Separated decoding functions from dwc3 driver. dt-bindings: add binding for USBSS-DRD controller. usb: dwc3: pci: add support for TigerLake Devices
| | * | | | usb: renesas_usbhs: add a workaround for a race condition of workqueueYoshihiro Shimoda2019-07-031-12/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The old commit 6e4b74e4690d ("usb: renesas: fix scheduling in atomic context bug") fixed an atomic issue by using workqueue for the shdmac dmaengine driver. However, this has a potential race condition issue between the work pending and usbhsg_ep_free_request() in gadget mode. When usbhsg_ep_free_request() is called while pending the queue, since the work_struct will be freed and then the work handler is called, kernel panic happens on process_one_work(). To fix the issue, if we could call cancel_work_sync() at somewhere before the free request, it could be easy. However, the usbhsg_ep_free_request() is called on atomic (e.g. f_ncm driver calls free request via gether_disconnect()). For now, almost all users are having "USB-DMAC" and the DMAengine driver can be used on atomic. So, this patch adds a workaround for a race condition to call the DMAengine APIs without the workqueue. This means we still have TODO on shdmac environment (SH7724), but since it doesn't have SMP, the race condition might not happen. Fixes: ab330cf3888d ("usb: renesas_usbhs: add support for USB-DMAC") Cc: <stable@vger.kernel.org> # v4.1+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| | * | | | usb: gadget: udc: renesas_usb3: remove redundant assignment to retColin Ian King2019-07-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Variable ret is being initialized with a value that is never read and ret is being re-assigned immediately after the initialization in both paths of an if statement. This is redundant and can be removed. Addresses-Coverity: ("Unused value") Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| | * | | | usb: dwc2: use a longer AHB idle timeout in dwc2_core_reset()Martin Blumenstingl2019-07-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use a 10000us AHB idle timeout in dwc2_core_reset() and make it consistent with the other "wait for AHB master IDLE state" ocurrences. This fixes a problem for me where dwc2 would not want to initialize when updating to 4.19 on a MIPS Lantiq VRX200 SoC. dwc2 worked fine with 4.14. Testing on my board shows that it takes 180us until AHB master IDLE state is signalled. The very old vendor driver for this SoC (ifxhcd) used a 1 second timeout. Use the same timeout that is used everywhere when polling for GRSTCTL_AHBIDLE instead of using a timeout that "works for one board" (180us in my case) to have consistent behavior across the dwc2 driver. Cc: linux-stable <stable@vger.kernel.org> # 4.19+ Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| | * | | | USB: gadget: function: fix issue Unneeded variable: "value"Hariprasad Kelam2019-07-031-2/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | fix below issue reported by coccicheck drivers/usb/gadget/function/f_eem.c:169:7-12: Unneeded variable: "value". Return "- EOPNOTSUPP" on line 179 We can not change return type of eem_setup as its registered with callback function Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| | * | | | usb: phy: phy-mxs-usb: add imx7ulp supportPeter Chen2019-07-031-1/+66
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At imx7ulp, the USB related analog register is located in PHY register region too, so we need to control PLL at PHY driver directly. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| | * | | | usb:cdns3 Fix for stuck packets in on-chip OUT buffer.Pawel Laszczak2019-07-032-2/+341
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Controller for OUT endpoints has shared on-chip buffers for all incoming packets, including ep0out. It's FIFO buffer, so packets must be handled by DMA in correct order. If the first packet in the buffer will not be handled, then the following packets directed for other endpoints and functions will be blocked. Additionally the packets directed to one endpoint can block entire on-chip buffers. In this case transfer to other endpoints also will blocked. To resolve this issue after raising the descriptor missing interrupt driver prepares internal usb_request object and use it to arm DMA transfer. The problematic situation was observed in case when endpoint has been enabled but no usb_request were queued. Driver try detects such endpoints and will use this workaround only for these endpoint. Driver use limited number of buffer. This number can be set by macro CDNS_WA2_NUM_BUFFERS. Such blocking situation was observed on ACM gadget. For this function host send OUT data packet but ACM function is not prepared for this packet. It's cause that buffer placed in on chip memory block transfer to other endpoints. Issue has been fixed for DEV_VER_V2 version of controller. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| | * | | | usb:cdns3 Add Cadence USB3 DRD DriverPawel Laszczak2019-07-0319-0/+6916
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduce new Cadence USBSS DRD driver to Linux kernel. The Cadence USBSS DRD Controller is a highly configurable IP Core which can be instantiated as Dual-Role Device (DRD), Peripheral Only and Host Only (XHCI)configurations. The current driver has been validated with FPGA platform. We have support for PCIe bus, which is used on FPGA prototyping. The host side of USBSS-DRD controller is compliant with XHCI specification, so it works with standard XHCI Linux driver. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-06-17 02:24:35 +0200